I am trying to install RUU on my HTC One X and getting error 170
My CID is 044 Asia WWE
Things I have done..
1) extracted RUU and copied rom.zip
2) flashed recovery, boot, system and cleared cache
3) bootloader locked
but still getting the same error. help me plz
Why don't u run the ruu as it is
MarcelHofs said:
Why don't u run the ruu as it is
Click to expand...
Click to collapse
tried that, same
Then you have the wrong ruu ?
What's your main version ?
Do
Fastboot getvar version-main
MarcelHofs said:
Then you have the wrong ruu ?
What's your main version ?
Do
Fastboot getvar version-main
Click to expand...
Click to collapse
version-main: 2.17.707.3
RUU_ENDEAVOR_U_ICS_40_S_hTC_Asia_WWE_2.17.707.3_Radio_2.1204.135.20_release_278245_signed << the RUU I downloaded
Strange ! Did u run the ruu with admin rights from pc ? I have of problems if you don't run it with admin rights !
I did tried, but I'm quite confused all other stock Rom comes with HTC One X
the one i downloaded start with the intiate of S, that might be problem ? ICS_40_S_HTC
Helppppppppppp :crying:
Well the ruu should be fine, did you try to re-download the ruu again. Maybe a bad download that corrupted the ruu.exe file ?
MarcelHofs said:
Well the ruu should be fine, did you try to re-download the ruu again. Maybe a bad download that corrupted the ruu.exe file ?
Click to expand...
Click to collapse
alright I'll try
Ow and you did put the phone in bootloader/fastboot USB mode ?
Just to be sure u did !
and by the way is there any problem with connecting way ?
I tried to connect phone to computer as a charger and as with HTC sync manger then I tried with Fastboot but same problem occur error 170
USB connection Error
The only thing you could check before starting the ruu is to do a fsstboot command
Fastboot devices
If it comes up with the serial number the connection should be fine.
Try a reboot of the pc and run it again !
Try to connect the USB cable directly to the computer instead to the USB hub(if you are doing so).
whats your hboot version? are you coming back from custom jb rom?
have you tried the jb ruu?
There is one error 170 case, it was due to the cable is connected to PC's usb 3.0, when connect to usb 2.0... the RUU runs fine, no fastboot error, no usb connection error.
ckpv5 said:
There is one error 170 case, it was due to the cable is connected to PC's usb 3.0, when connect to usb 2.0... the RUU runs fine, no fastboot error, no usb connection error.
Click to expand...
Click to collapse
How do I connect to USB 2.0 ? My Hboot version is 1.2
USB 2.0 at PC side not phone or hboot
So your PC usb is USB 3.0 or USB 2.0 ?
ႈI don't know My laptop is HP dv4 with Core I5 processor
Related
Hi guys,
I hope you can help me, sorry for my english, I'm from France, I wanted to install cyagenmod 10 but the installation was aborted.
I've relock bootloader to install a RUU but not enough battery, I managed with a lot of issues to unlock the bootloader to recharge my hox but now I can't get to fastboot by usb, the hox is no longer recognized on my pc,when it connected on my pc i can go in fastboot but i can't navigate in, i can't up or down in reboot, boot bootloader... it's blocked.
So i can't flash the recovery to charge the device, I can't do anything, i've clockwork recovery touch 5.8.2.4, i can't charge or mount usb with this recovery.
the big problem is that when I charge it, an hour after the phone turns off, no battery, nothing, is it normal ?
I think it goes up to 3600 mV and discharge but why?
I'm looking for a solution since one week, i don't find.
I've buy this used hox on ebay uk 2 weeks ago, it worked perfectly before manipulation.
Sorry again
Thank you for your help.
Good evening all.
http://forum.xda-developers.com/showthread.php?t=1960253
Use this.
Then flash recovery and Rom of choice!
Sent from my HTC One X using xda premium
Got it in .bat already
http://db.tt/aLqeTpPO
Place the file in the fastboot flash folder, put the phone in the bootloader/fastboot usb mode and execute the .bat file, it will reboot the phone constantly and charge it little by little......
And update to CWM 5.8.4.0, it will charge from there and you can mount sd as usb mass storage.
Ok guyz thanks but the problem is when i plug the hox on comp, it isn't recognized
C:\Users\\Desktop\Fastboot>fastboot getvar battery-voltage
< waiting for device >
I plug the cable, i've Fasboot USB but it's like i've plugged nothing, it's since i've re-unlock bootloader with htc dev.
In first i've unlock boot to install CMD 10, then i've relock to install RUU and now i've re-unlock to charge and fix it the problem.
it's could be a problem with htc drivers or may be the pc ??
Try a different usb port, I don't think the HTC drivers like USB3.
I've tried hundred of times all usb2 ports, i've tried in another pc, i've uninstalled et reinstalled many of times htc sync and sdk but always same result, my hox isn't recognize, impossible to do something, i'm blocked, i've tried everything since 10 days.
Please please need help !!!
Did you try this :
Uninstall HTC sync completely and only install these HTC drivers
http://db.tt/gXVxa3Dp
Solved !
i've tried these drivers and last, yesterday i've change usb cable and it was finally recognized!!
I've flashed recovery and boot, now all works, however i've tried with 2 usb cables, third was good.
thank you very much for your helps guyz, have fun.
Sorted then ! Good. :thumbup:
CASE CLOSED !
Hello, I'm having some problems with my HTC One X.
When trying to send commands to the phone while it is in fastboot, cmd says "waiting for device" and doesn't change.
My bootloader is unlocked and CWM Recovery is installed although when I try and install one of the 4 ROM's I have on my phones internal storage the installer looks like it's working until it gets to around 20% and then says it is complete. When the device restarts it gets stuck on the "HTC quietly brilliant" screen. I am however still able to mount the phone and put files onto it through CWM. I have tried to use RUU and this just gives an error about USB not connected.
If you think you can help, thank you and if you need to know anything else I will try and give you as much information as I can.
Thanks,
Andy
Here's a checklist for you:
Phone in fastboot mode
Correct drivers installed
ADB/fasboot up to date
What does 'fastboot devices' return?
Yeah, it was all working earlier today but it just seemed to stop. fastboot devices returns
"c:\Fastboot>fastboot devices
c\:Fastboot>"
TToivanen said:
Here's a checklist for you:
Phone in fastboot mode
Correct drivers installed
ADB/fasboot up to date
What does 'fastboot devices' return?
Click to expand...
Click to collapse
What OS is your computer running? Does it say FASTBOOT USB on phone display?
I have a macbook pro as my main computer but all things to do with rooting I do on a windows desktop.
This display says fastboot usb but all fastboot commands do nothing and it still doesn't show up in fastboot devices.
TToivanen said:
What OS is your computer running? Does it say FASTBOOT USB on phone display?
Click to expand...
Click to collapse
Reboot pc and phone if you haven't already.
You could try it with your mac, there's plenty of guides out there on how to setup.
Make sure to use sudo!!
Tried it on mac like you suggested, still no devices listed. And installations still only get to around 20%.
Do you think it's bricked?
TToivanen said:
Reboot pc and phone if you haven't already.
You could try it with your mac, there's plenty of guides out there on how to setup.
Make sure to use sudo!!
Click to expand...
Click to collapse
Are you using the original delivered HTC usb cable ?
Mr Hofs said:
Are you using the original delivered HTC usb cable ?
Click to expand...
Click to collapse
No, I lost it ages ago. I have tried several cbales now though and they were all working fine yesterday.
Alwsys use the original. Try again then
Mr Hofs said:
Alwsys use the original. Try again then
Click to expand...
Click to collapse
Tried a friends original cable for the same phone, still nothing. Anything else that you think might work?
Hi,
I'm running Cyanogenmod 10.1 (20130312-Nightly-endeavoru) for some time now.
I'ts time for a new version, but to do that I need to copy de vendor blob to my HOX.
However, for some unknown reason I cannot get a USB connection from my PC to the phone anymore.
Windows doesn't recognize the plugging in of the cord anymore. Both ADB devices and FASTBOOT devices show NO device attached.
USB debuggingmode is on.. so that can't be the problem. I reinstalled the htc-sync software to make sure drivers are installed properly..
I'm out of options of what to check further.
Any bright minds out there who can assist ?
Thanks,
Paul
Try disabling usb debugging, that should solve usb mass storage.
Sent from my IceCold One X
TToivanen said:
Try disabling usb debugging, that should solve usb mass storage.
Click to expand...
Click to collapse
makes no difference. HOX tells me USB storage is in use, with an orange/yellowish android-robot in the screen.
Still no sign from explorer and/or adb and/or fastboot
there is something rotten in the kingdom of denmark
Go to recovery > mounts and storage > mount usb storage.
Alternatively you can use adb when booted to recovery.
Sent from my IceCold One X
TToivanen said:
Go to recovery > mounts and storage > mount usb storage.
Click to expand...
Click to collapse
Hey, Thanks !! That seems to work. :good:
Question: Any idea why I can't have a connection outside of Recovery ?
Don't know what's the cause but it's likely fixed by doing a full wipe before installing the nightly and flashing the boot.img.
Sent from my IceCold One X
TToivanen said:
... and flashing the boot.img.
Click to expand...
Click to collapse
I'm afraid that's not going to happen. To flash boot.img I would need fastboot, and fastboot isn't finding the device..
A nice chicken-egg paradox
I'll try an update from the CM menu...
And it used to work before ?
Are you sure the device is in fastboot mode? (FASTBOOT USB displayed in red)
How about drivers on your PC?
Sent from my IceCold One X
TToivanen said:
And it used to work before ?
Are you sure the device is in fastboot mode? (FASTBOOT USB displayed in red)
How about drivers on your PC?
Click to expand...
Click to collapse
1) Yes, it used to work.
2) I wasn't trying to make the connection from recovery. Just the normal phone-mode, plug in the usb cable, pick USB connection from the menu, and activate USB storage.
3) Nothing really changed on my PC, and reinstalling HTC Sync software didn't do the trick. Drivers must still be good.
I've updated from the CM menu and now run CM 10.1 20130403-NIGHTLY-endeavoru (build date: Tue Apr 23:13:27 PDT 2013)
This hasn't changed my USB problem.
I meant the fastboot, it only works in fastboot mode.
Boot to bootloader by holding vol- and power. Select fastboot from the lil menu.
Now do fastboot devices and it should work.
Sent from my IceCold One X
TToivanen said:
I meant the fastboot, it only works in fastboot mode.
Click to expand...
Click to collapse
Ah - of course.
Yes, in fastbootmode, fastboot devices gives the device name.
ADB still refuses to answer
uninstalled the HTC drivers, and reinstalled from scratch. Still no USB connection in explorer
Gonna try a different computer tomorrow.
Thanks, so far
Huh, you don't need ADB in order to flash boot image. Once you do that, usb issues should be gone
Put the correct boot.img to your fastboot folder and
fastboot flash boot boot.img
Sent from my IceCold One X
The usb issue is definitely a PC related issue
I connected the hox with a laptop, and it worked as normal.
Now to find out why the pc won't recognise the hox anymore.
thanks for thinking along
btw, do I need to flash the boot.img when I update CM from the About >> CM updates menu ?
the kernel is now: 3.1.10-cyanogenmod+
[email protected] #1
Keep an eye on the changelog, if it says "kernel" or "ramdisk", you need to flash the boot image.
Sent from my IceCold One X
MeesterP said:
The usb issue is definitely a PC related issue
I connected the hox with a laptop, and it worked as normal.
Now to find out why the pc won't recognise the hox anymore.
thanks for thinking along
btw, do I need to flash the boot.img when I update CM from the About >> CM updates menu ?
the kernel is now: 3.1.10-cyanogenmod+
[email protected] #1
Click to expand...
Click to collapse
I don't know my friend has this on his hox, running venom and it has this issue across multiple pcs, operating systems and usb cables.
Mounts fine in recovery/fastboot but in sense its nope.
He has just got it back from repair so maybe that was the cause.
Sent from my HTC One X using xda app-developers app
treebill said:
but in sense its nope.
Click to expand...
Click to collapse
I'm running Cyanogenmod, which is non-sense
My laptop at work has the same issue - no connection possible.
So, I have a pc and a laptop that won't work, and one laptop that is working ok...
weird, and hard to pinpoint the underlying problem
My Phone randomly shutdown out of its own i tried diffrent custom roms they all have the same problem plz help
doopy84 said:
My Phone randomly shutdown out of its own i tried diffrent custom roms they all have the same problem plz help
Click to expand...
Click to collapse
Format sd card, flash ruu.
Sent from a dream.
pc wont see my desire hd
i tried to link my desire hd to my windows 8.1 pc but it just wont see the Phone. tried deleting the drivers but still no Phone even in astboot it wont detect the usb. plz help
doopy84 said:
i tried to link my desire hd to my windows 8.1 pc but it just wont see the Phone. tried deleting the drivers but still no Phone even in astboot it wont detect the usb. plz help
Click to expand...
Click to collapse
try disable usb debugging from setting in developer option...
or try pull out you're sd card from phone..and try format sd card n copy ruu file via card reader..then put in back to the phone n then flash the ruu..
hopefully can help..
flashed stock rom
i flashed a stock pd98img.zip but still no usb only charge even in fastboot i wont get usb
tried flashing ruu
i tried the latest wwe version ruu.exe on my pc it cant find my phone
doopy84 said:
i flashed a stock pd98img.zip but still no usb only charge even in fastboot i wont get usb
Click to expand...
Click to collapse
doopy84 said:
i tried the latest wwe version ruu.exe on my pc it cant find my phone
Click to expand...
Click to collapse
you mean you've already flashing stock ruu..yes..?, so what do you mean no usb only charge..?
can you explain more detail is what do you want to do exactly...??
flashed rom.zip from ruu
i extracted the rom.zip file and flashed it but still no usb even in fastboot plz help
doopy84 said:
i extracted the rom.zip file and flashed it but still no usb even in fastboot plz help
Click to expand...
Click to collapse
still can't understand what you mean exactly is...but if i'm not wrong..you're still no success flashing stock ruu..maybe..if that so..
just copy n put PD98IMG.zip file to the root of you're sd card...n reboot into bootloader with press volume down+power until inside hboot..then let the bootloader check n read you're sd card..then confirm that to flash rom when bootloader already success detect PD98IMG.zip file in you're root sd card..
hopefully this can help..
no usb connection
I am trying to get the pc to reconise my Phone i can only charge it no mount as drive or do any fastboot commands because in fastboot when i plug in the usb i dont get usb fastboot i flashed the stock ruu that worked but still no usb connection to the pc
doopy84 said:
I am trying to get the pc to reconise my Phone i can only charge it no mount as drive or do any fastboot commands because in fastboot when i plug in the usb i dont get usb fastboot i flashed the stock ruu that worked but still no usb connection to the pc
Click to expand...
Click to collapse
try disable usb debugging in settings->applications->development->untick usb debugging or try another cable/usb port..
tried that
I tried diableing usb debugging and 5 diffrent cables that work with other htc desire hd still no luck
i m trying to get custom roms on it again but whitout fastboot or any other kind of usb connection that is impossible
Maby someone knows a rooted pd98img.zip file i can flash cause that works
doopy84 said:
I tried diableing usb debugging and 5 diffrent cables that work with other htc desire hd still no luck
i m trying to get custom roms on it again but whitout fastboot or any other kind of usb connection that is impossible
Maby someone knows a rooted pd98img.zip file i can flash cause that works
Click to expand...
Click to collapse
can you tell me what status of you're phone bootloader now exactly..?, i mean.. s-off or s-on.., and what recovery do you have..?
JJeamy said:
can you tell me what status of you're phone bootloader now exactly..?, i mean.. s-off or s-on.., and what recovery do you have..?
Click to expand...
Click to collapse
stock recovery and s-on because i flashed the latest ruu with hoot 2.0
doopy84 said:
stock recovery and s-on because i flashed the latest ruu with hoot 2.0
Click to expand...
Click to collapse
so..i suggest you must do the step from beginning again..s-off, rooting n istalling custom recovery again..
maybe you can try simple method a AAHK2 script to do it all.. read n download link in this thread..
hopefully can help..
i cant do that because i dont have an usb connection to the pc thats my problem
doopy84 said:
i cant do that because i dont have an usb connection to the pc thats my problem
Click to expand...
Click to collapse
you mean you don't have original cable data from htc original charger it self...?
if so..maybe you can try used different data cable from different phone...
Just try to instal latest HTC Sync on your pc.
I have a Original htc cable that works with other phones and i have got htc sync installed thats what i am trying to tell i cant get an usb connection to the pc it won't find the Phone not in normal mode not in hboot and not in fastboot
I have a Original htc cable that works with other phones and i have got htc sync installed thats what i am trying to tell i cant get an usb connection to the pc it won't find the Phone not in normal mode not in hboot and not in fastboot
When I try to flash the ruu back I always get an usb error no matter the pc ? What can I do?
Several possible reasons for this:
1) Do you have HTC Sync installed? Or try to uninstall and re-install
2) RUU doesn't work well with USB 3.0
3) If RUU doesn't work with phone booted into OS, try to boot into bootloader-fastboot and see if that helps
4) Also possible something else is wrong, like broken USB port on the phone
This ^^^
Also try another USB port on pc, another cable... And possibly another pc altogether. :good: