Related
I first posted this in MrRobinson's excellent thread at http://forum.xda-developers.com/showpost.php?p=35165945&postcount=1610, but decided others might benefit from it that may not be following his instructions because they're already rooted...
For now, just see my instructions in the post mentioned above. Once I get off work this evening I will be updating this post with more detailed information. At least one other user has followed these instructions and reported that his flash counter remains at 0, even after multiple reboots and custom recovery actions.
The usual disclaimers about bricking your phone, blowing up your grandmother's house, drowning your dog, etc. apply. I'M NOT RESPONSIBLE!!!
Reserved - just in case...
I can confirm this method works as described. I also added instructions in the same thread on how you can still use this method if you happen to have already upgraded to JB via the traditional method (ie via ODIN or Kies) and have a count or custom status. It requires reverting to stock ICS and recovery and then moving forward with the above process, and the end result is Rooted JB with Custom Recovery and retaining official rom status with no counter increments.
whats the point.. if you put a custom recovery on it updates the counter anyway.. on every boot. unless you root and remove certain files.. and if you are rooted and remove those. you can use triangle away anway.
If you revert to ics, then flash jb without the accompanying bootloaders you don't have to worry the flash counter. Why is that important? In case you need to warranty it and can't get to triangle away to reset it. And some of us like to say its never been tripped
Btw, I'm running rooted stock with twrp and my counter is still 0. And i installed twrp after flashing jb.
lgkahn said:
whats the point.. if you put a custom recovery on it updates the counter anyway.. on every boot. unless you root and remove certain files.. and if you are rooted and remove those. you can use triangle away anway.
Click to expand...
Click to collapse
That's the point. I flashed and KEPT my custom recovery, and it does not increase the counter no matter how often I use it. I haven't tried loading a different custom recovery now that I'm on JB, but so far all is well.
By the way, sorry I haven't followed up on the OP. Been very busy.
78Staff said:
I can confirm this method works as described. I also added instructions in the same thread on how you can still use this method if you happen to have already upgraded to JB via the traditional method (ie via ODIN or Kies) and have a count or custom status. It requires reverting to stock ICS and recovery and then moving forward with the above process, and the end result is Rooted JB with Custom Recovery and retaining official rom status with no counter increments.
Click to expand...
Click to collapse
Thanks for the other post. I was beginning to think no one even cared. I'll see if I can incorporate your info into the OP when I finally get around to it...
lgkahn said:
whats the point.. if you put a custom recovery on it updates the counter anyway.. on every boot. unless you root and remove certain files.. and if you are rooted and remove those. you can use triangle away anway.
Click to expand...
Click to collapse
You're doing it wrong. Mine still displays 0 and official after installing multiple recoveries, countless zip flashes to include AOKP and TW ROMs and approx 4-5 Odin flashes. My wife's recently rooted and jb'd S3 also says the same thing.
Sent from my SAMSUNG-SGH-I747 using xda premium
Are any of you having SD card issues with the stock version of JB?
LAKsupply said:
Are any of you having SD card issues with the stock version of JB?
Click to expand...
Click to collapse
Nope. Have you tried reverting to ICS to see if the problem persists?
Sent from my SAMSUNG-SGH-I747 using xda premium
d3athsd00r said:
You're doing it wrong. Mine still displays 0 and official after installing multiple recoveries, countless zip flashes to include AOKP and TW ROMs and approx 4-5 Odin flashes. My wife's recently rooted and jb'd S3 also says the same thing.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
no that is becuase one of the flashes you did removed those recovery files that comes with stock jb.. or replaced the kernel that reflashes them..
normal upgrade from ics to stock jb.. will reset counter on every boot unless you change the kernel or remove the recovery image.
d3athsd00r said:
Nope. Have you tried reverting to ICS to see if the problem persists?
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
It's fine on ICS... this is Jedi Invasion JB and the KT747 kernel. I wasn't sure if it was just the ROM and then noticed that others with different roms and stock roms had the same issues. I'm wondering if it wasn't an issue in the initial JB release (this is a ported T Mobile rom) that the dev built this rom off of. I'll flash another JB version and see if the problem persists.
lgkahn said:
no that is becuase one of the flashes you did removed those recovery files that comes with stock jb.. or replaced the kernel that reflashes them..
normal upgrade from ics to stock jb.. will reset counter on every boot unless you change the kernel or remove the recovery image.
Click to expand...
Click to collapse
I.E. I did it right. Doing it right the first time keeps you from having to fix it later.
Sent from my SAMSUNG-SGH-I747 using xda premium
So... it appears my previous issue was a bad sd card. It's kind of a big coincidence that the old card didn't work with the Jedi rom, and now the new card doesn't work with any rom. I just flashed AOKP and the correct KT747 kernel, and no love. I pulled the 32g sd card and fed it my wife's old 8g card, and it works perfectly. Is there a such thing as a rom cooking an sd card?
great find! followed the instructions with mobile odin and worked like a charm, I came from a jb aosp rom, but first I nandroid back to an ics-lg1 backup I did a few months back, no counter tripping after a few reboots into recovery
one question, is there any thread where I can find mods for this 4.1 TW stock jelly bean, like power menu, toogles, kill back button,tether etc if anyone has a link please share
many thanks!
When your sdcard went did it say damaged? That happened to me going from ics to jb mr robinsons official stock. So i put in a brand new card, then it tells me under about status is modified which it wasnt when the first sd card worked. Even odder my pc couldnt see the card, so i thought it truly was damaged. I put it back in just to try a day later and all of a sudden i can format it within the phone, which, I due and then it works again and the modified under status is back to normal. Im gonna go through the source of that package this week and see if I can find whats up and what could of tripped and then reverted that counter.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Right on this worked great! And now don't have to worry about the stupid flash counter
sent from the dark side of the universe....
I followed the method in this thread (using mobile odin to go from rooted ICS to rooted JB). It was pretty easy and it worked great. However, after the first restart, I started having a strange problem. Every 5 minutes, the phone will lose its network connection for approximately 30 seconds. This appears as red on the "Mobile network signal" under battery usage details, and I'm unable to make any calls. This drop happens like clockwork. You could set your watch by it.
I've tried everything (uninstalling certain programs, flashed different modems, factory reset, etc) and nothing worked. I reverted back to ICS and then redid the method from this thread, and the same thing happened (JB worked great until I restarted for the first time, etc..
Any ideas? For a while I thought it was some weird issue with the analog clock widget.... But getting rid of that didn't help. And I've tried every possible google search on this issue but I can't find anything. For now I'm back to ICS.
Yea that is weird maybe just try it over again fresh odin ics and go from there. Almost seems like something didn't take going thru the flash process
sent from the dark side of the universe....
did you check the apns? right after I did the flash, it didnt have the "ATT PTA" apn so I had to manually add it
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
ASK THE QUESTION [NOOB FRIENDLY]
I am not a full time developer! So do not request any roms or apps from me. I only make roms for my self and friends.
This thread is created to help members [noobs] to understand more about android and the device itself.
I decided to create this thread because the developers already have enough work to do, they wont be able to answer all questions from members [noobs].
I only owns the N7100 (galaxy note international model), but i will try by best to answer all of your questions using my experiences .
*** My time zone is GMT +7 (remember this)***
Check out my guides here: http://forum.xda-developers.com/showthread.php?t=2055827
Thanks to these following members who helped me answer questions in this thread:
ObenDevin - Thanks to him for helping me answer lots of questions
Reserved!
Reserved!
Can you pls help me with my phone? I'm unable to flash anything onto it to get it working again :/ Gets stuck at boot no recovery only download mode. Counter goes up when i flash custom things but binary and system do not change to official when i flash stock rom. Tried many things. Here you can read more about it:
http://forum.xda-developers.com/showthread.php?t=2040464
Grateful for any help :/
limital said:
Can you pls help me with my phone? I'm unable to flash anything onto it to get it working again :/ Gets stuck at boot no recovery only download mode. Counter goes up when i flash custom things but binary and system do not change to official when i flash stock rom. Tried many things. Here you can read more about it:
http://forum.xda-developers.com/showthread.php?t=2040464
Grateful for any help :/
Click to expand...
Click to collapse
Firstly, is your device rooted? have you got cwm installed in your device before not being able to boot? If yes i recommend you to try and reflash the file and stock firmware through odin. MAKE SURE that it is for you device! [eg. for n7100 and not for n7105]
The stock browser doesn't have anymore the "zoom on the side" feature on XXDLK7? or is it custom rom specific? any way to get it back?
Thanks^^
Hi have posted this but not gwtting any joy...please can you have a look...attached
Sent from my GT-N7100 using xda app-developers app
monkey sausage said:
Hi have posted this but not gwtting any joy...please can you have a look...attached
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Hi, your screenshot does not give me the information about your device model but not about other things, can you please go into you status and send me your device status, also please send me the whole picture of your "about device."
tacchan23 said:
The stock browser doesn't have anymore the "zoom on the side" feature on XXDLK7? or is it custom rom specific? any way to get it back?
Thanks^^
Click to expand...
Click to collapse
Should get chrome hahaha but anyways, there is a possibilty that it is rom specific but that is very unlikely, as developers would not really wanna touch the stock browser as normally i would see they would add an alternative browser such as chrome to their roms. To get the feature back you might need to push the app from the previous rom/version you were using.
monkey sausage said:
Hi have posted this but not gwtting any joy...please can you have a look...attached
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Just try restarting your phone...
I had faced the same problem once and rebooting it solved that...
Sent from my GT-N7100 using xda premium
Restarted phone all seems well now..says latest software updated...strange behaviour. ..thanks for the help
Sent from my GT-N7100 using xda app-developers app
TriangleAway crash
Hello, thanks for this thread. I have a GT-N7100 now but previously i had GT-9100 and i'm familiar with rooting, rom flashing, etc.. and i've used TriangleAway so many times. When i get my hands on note 2 first thing i've done was rooting it with CF Auto Root package via Odin. then i've done wiping steps and after that i tried to flash my counter via TriangleAway(purchased from market). It said i have to download data to use it so i did. When TriangleAway opened "Current Status" said current status cannot be determined so i have to go special boot mode for reset. So i tried to reset my counter. Unfortunately when app tried to check for kernel, first app froze and after that it crashed and showed a warning about app being stopped. I tried to delete and re-install app(no good), gone to download mode it said normal status with 1 custom software install, looked to recovery menu for any changes(it is stock not CWM) and tried to find any wrong thing i've screwed up while rooting. But i couldn't find anything. I've looked at chainfire's blog, TriangleAway app post and everywhere i can think of. I cannot find anything. Can u help me with my problem. Thank you for your time and if i misused English anyhow and it came difficult to read sorry in advance.
Chayangkul99 said:
Firstly, is your device rooted? have you got cwm installed in your device before not being able to boot? If yes i recommend you to try and reflash the file and stock firmware through odin. MAKE SURE that it is for you device! [eg. for n7100 and not for n7105]
Click to expand...
Click to collapse
No my phone was not rooted before that happened and even when i flash CWM onto it nothing changes -> I'm not getting into recovery
ObenDevin said:
Hello, thanks for this thread. I have a GT-N7100 now but previously i had GT-9100 and i'm familiar with rooting, rom flashing, etc.. and i've used TriangleAway so many times. When i get my hands on note 2 first thing i've done was rooting it with CF Auto Root package via Odin. then i've done wiping steps and after that i tried to flash my counter via TriangleAway(purchased from market). It said i have to download data to use it so i did. When TriangleAway opened "Current Status" said current status cannot be determined so i have to go special boot mode for reset. So i tried to reset my counter. Unfortunately when app tried to check for kernel, first app froze and after that it crashed and showed a warning about app being stopped. I tried to delete and re-install app(no good), gone to download mode it said normal status with 1 custom software install, looked to recovery menu for any changes(it is stock not CWM) and tried to find any wrong thing i've screwed up while rooting. But i couldn't find anything. I've looked at chainfire's blog, TriangleAway app post and everywhere i can think of. I cannot find anything. Can u help me with my problem. Thank you for your time and if i misused English anyhow and it came difficult to read sorry in advance.
Click to expand...
Click to collapse
I used cf auto root on a friends n7100. The counter was reset by auto root itself.
You dont need triangle away as separate app. Just use cf auto root and make sure you use the right version for n7100
EDIT: you need triangle away for the counter. Auto root just installs stock recovery after rooting. I was wrong.
Sent from my GT-I9100G using xda app-developers app
Ktp1976 well even before i used TriangleAway counter was showing 1 due to CF Auto Root flash via Odin. But what you are saying is interesting thoug i've never seen something like it.
GT-N7100 cihazımdan Tapatalk 2 ile gönderildi
As it seems you are right and my memories were wrong
It installs stock recovery after rooting. You need triangle away to reset the counter. I just looked it up under forum.xda-developers.com/showthread.php?t=1933542
I did not have any problems though.
Sent from my GT-I9100G using xda app-developers app
ObenDevin said:
Hello, thanks for this thread. I have a GT-N7100 now but previously i had GT-9100 and i'm familiar with rooting, rom flashing, etc.. and i've used TriangleAway so many times. When i get my hands on note 2 first thing i've done was rooting it with CF Auto Root package via Odin. then i've done wiping steps and after that i tried to flash my counter via TriangleAway(purchased from market). It said i have to download data to use it so i did. When TriangleAway opened "Current Status" said current status cannot be determined so i have to go special boot mode for reset. So i tried to reset my counter. Unfortunately when app tried to check for kernel, first app froze and after that it crashed and showed a warning about app being stopped. I tried to delete and re-install app(no good), gone to download mode it said normal status with 1 custom software install, looked to recovery menu for any changes(it is stock not CWM) and tried to find any wrong thing i've screwed up while rooting. But i couldn't find anything. I've looked at chainfire's blog, TriangleAway app post and everywhere i can think of. I cannot find anything. Can u help me with my problem. Thank you for your time and if i misused English anyhow and it came difficult to read sorry in advance.
Click to expand...
Click to collapse
Hi, at the moment i would recommend you to try and restock again and then try to reset the counter. You can also try and download the triangle away version from the xda forum(i know its the same but who knows it might make a difference). If this does not work, i would recommend you to try and install redpill kernel and then try to reset counter again then restock, if you are running a custom roms in your phone, everytime you reboot the device will store a counter, so you will have to reset the counter everytime. Hope i have helped you.
Sent from my GT-N7100 using xda app-developers app
limital said:
No my phone was not rooted before that happened and even when i flash CWM onto it nothing changes -> I'm not getting into recovery
Click to expand...
Click to collapse
Your case is really weird, maybe try root it before installing the cwm and see what happens. Then after that try and restock it again.
Sent from my GT-N7100 using xda app-developers app
Check out my guides here: http://forum.xda-developers.com/showthread.php?t=2055827
Sent from my GT-N7100 using xda app-developers app
Chayangkul99 said:
Hi, at the moment i would recommend you to try and restock again and then try to reset the counter. You can also try and download the triangle away version from the xda forum(i know its the same but who knows it might make a difference). If this does not work, i would recommend you to try and install redpill kernel and then try to reset counter again then restock, if you are running a custom roms in your phone, everytime you reboot the device will store a counter, so you will have to reset the counter everytime. Hope i have helped you.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
First of all thank you and ktp1976 for answering.. Ok now i'm re-download everything from your thread and try it again.. I saw redpill kernel yesterday while i was searching is there any siyah kernel for note 2.. I luvved siyah kernel on my sgs2 but unfortunately there isn't one for it and developer wrote he will not wrote any version of siyah kernel for note series anytime soon.. so while i was looking for a kernel written by a suggested developer from gokhanmoral i came across to it.. the thing is i never have used any kernels double rom features or try to overlock any of my devices, i tried custom roms like miui, cyanogen, lightning on sgs2 but there was always a downside of all of the custom roms and every single time i've re-return to stock roms.. and while using stock roms i don't need any cutting edge features of advanced kernels i just need root permissions for using TitaniumBackup, Root Explorer and ROM ToolBox.. so that is the reason why i didn't try to have an advanced kernel.. Still if you are saying i will need it i will give it a shot.. I'll report after.. :fingers-crossed:
Hello, I want to try and install Omega ROM 9.1 to my Note II (bought from Orange Slovakia). In 2 weeks I will send note II to service (bad cover) so I will need to unroot my device. Can you show me right way how to unroot? I need set counter to 0. Thank you very much.
See attachment please
If you are currently unrooted then its better to send it as soon as possible to service center. You can change the rom later as unrooting is a bit headache especially for people new to android rooting.
Sent From Samsung's Galaxy Note II Using Internet
Hi, use the search button. It gives the best answers mostly no pun intended.
Use this toolkit
http://forum.xda-developers.com/showthread.php?p=32466314
Good luck!
Sent from my Nexus 7 using xda premium
Use triangle away to flash Counter to zero. ..then flash stock rom using Odin and send to service
scribbled from my note 2 (N7100)
pakure said:
Use triangle away to flash Counter to zero. ..then flash stock rom using Odin and send to service
scribbled from my note 2 (N7100)
Click to expand...
Click to collapse
I'm a bit confuse here. Triangle away method doesn't work for me, i can't guet 0 to my counter. Stay on YES / 1.
There is any method beside buying the play version of Triangle away ? I want to get a full stock condition.
Try restoring stock recovery and kernel or stock rom altogether.
Sent From Samsung's Galaxy Note II Using Internet
UtkarshGupta said:
Try restoring stock recovery and kernel or stock rom altogether.
Sent From Samsung's Galaxy Note II Using Internet
Click to expand...
Click to collapse
Already did the recovery stock and stock rom part. But how restoring my kernel ?
edit: Hooops, I did it wrong
After reading a post where the author has solved the same problem by making the whole process again, I tried again the triangle away part (with the v2.37 available here)... And It's working !
The first time I did not have the special boot screen, I don't know what I had done wrong, but I guess nothing had been done then. But everything is okay for me now !
But I'm still interested in this story of kernel ...
They will be able to see that you have a custom kernel. That means that you had the ability to flash kernel I.e. you rooted your phone.
From your pic it looks like you have stock kernel.
Sent From Samsung's Galaxy Note II Using Internet
use persues kernal or neak kernal then use triangle away it resetts without booting tben goto download mode and flash stock rom everything will be unrooted and counter at 0
omega rom v9. 1 kalgas mixed theme
thank you guys. found my stock ROM, used triangle away and flashed to stock. All works fine now, thank you again
I received my Allshare hub yesterday and of course it doesn't work, because I'm rooted and have TWRP recovery. I used Triangle Away, but I need to change the recovery to the stock.
If anyone knows a link to the zip that can be flashed from TWRP I would really appreciate it.
I am on the new UVALL4.
Thanks
Sent from my SGH-T889 using xda premium
premiatul said:
I received my Allshare hub yesterday and of course it doesn't work, because I'm rooted and have TWRP recovery. I used Triangle Away, but I need to change the recovery to the stock.
If anyone knows a link to the zip that can be flashed from TWRP I would really appreciate it.
I am on the new UVALL4.
Thanks
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
I just got mine the other day and it would disconnect after ten seconds. Used triangle away and it worked great. I'm rooted and on jedi. On CWM aand not stock. Dunno if it makes a difference though.
Thanks for your reply.
I tryed anything that I can think of, short of going back to stock completely.
As far as recovery, I tryed TWRP, CWM and Stock.
I tryed stock Odexed and Deodexed, but I was always rooted.
I tried Perseus kernel also....
Triangle Away says "Count 0" and Binary "official" (I think).
The About Phone it STILL says "Modified", no matter what!
This *****g thing disconnects after 10 sec. every time!
I'm gon'a lay down and cry a little bit now....:crying:
premiatul said:
Thanks for your reply.
I tryed anything that I can think of, short of going back to stock completely.
As far as recovery, I tryed TWRP, CWM and Stock.
I tryed stock Odexed and Deodexed, but I was always rooted.
I tried Perseus kernel also....
Triangle Away says "Count 0" and Binary "official" (I think).
The About Phone it STILL says "Modified", no matter what!
This *****g thing disconnects after 10 sec. every time!
I'm gon'a lay down and cry a little bit now....:crying:
Click to expand...
Click to collapse
I'm not sure but I read in another thread that if you root via Mobile Odin the device status will read "normal". I'm considering doing this as I have not updated my phone yet to the latest update that fixes the exploit. I rooted via the exploit abuse (stock) and am using the AllShare hub which is working flawlessly (which is why I'm hesitant to do the update).
GMAN1722 said:
I'm not sure but I read in another thread that if you root via Mobile Odin the device status will read "normal". I'm considering doing this as I have not updated my phone yet to the latest update that fixes the exploit. I rooted via the exploit abuse (stock) and am using the AllShare hub which is working flawlessly (which is why I'm hesitant to do the update).
Click to expand...
Click to collapse
Is your device status reading now "normal"?
EDIT: I wish one (or more) of our Devs would take that Allshare app apart and remove that freaking "check" from it..
premiatul said:
Is your device status reading now "normal"?
EDIT: I wish one (or more) of our Devs would take that Allshare app apart and remove that freaking "check" from it..
Click to expand...
Click to collapse
Yes, device status is "normal". I just rooted to debloat and add mods that don't require a custom recovery.
I picked one of these up last week, myself. I have to say that I'm pretty impressed for what it does. However there can be improvements i.e. display refresh lag through the dongle could be tightened up and an option to address overscan.
Now it was a bit of a chore to get this working. Here's the current config on my phone, as reference for your efforts:
- Jedi X9 ROM
- stock T889UVALK8 kernel
- stock T889UVALL4 baseband
- Tri-Angle away showing '0'
- Device is reported as being 'modified'
So it seems as if DRM checks the kernel and number of flashes, IMHO. I'll update the kernel, once the LTE update comes out and if a new kernel is required for it to work (hopefully it's just the modem). I don't want to update the kernel just yet, as I don't want to risk losing root. I know that there are ways to recover it, but the features in the new factory ROM weren't enough to invest the possible recovery time.
Good luck!
braintez said:
I picked one of these up last week, myself. I have to say that I'm pretty impressed for what it does. However there can be improvements i.e. display refresh lag through the dongle could be tightened up and an option to address overscan.
Now it was a bit of a chore to get this working. Here's the current config on my phone, as reference for your efforts:
- Jedi X9 ROM
- stock T889UVALK8 kernel
- stock T889UVALL4 baseband
- Tri-Angle away showing '0'
- Device is reported as being 'modified'
So it seems as if DRM checks the kernel and number of flashes, IMHO. I'll update the kernel, once the LTE update comes out and if a new kernel is required for it to work (hopefully it's just the modem). I don't want to update the kernel just yet, as I don't want to risk losing root. I know that there are ways to recover it, but the features in the new factory ROM weren't enough to invest the possible recovery time.
Good luck!
Click to expand...
Click to collapse
interesting. So for the dongle to continue to work it's just a matter of the kernel being stock (with no flash count) and it really doesn't matter if the phone status is modified or not?
GMAN1722 said:
interesting. So for the dongle to continue to work it's just a matter of the kernel being stock (with no flash count) and it really doesn't matter if the phone status is modified or not?
Click to expand...
Click to collapse
I did find while trying to use the dongle today that I had to use triangle away in order for it to work again. Really don't want to have to do that every time. Can't be good.
does stock baseband perform on jedi
braintez said:
I picked one of these up last week, myself. I have to say that I'm pretty impressed for what it does. However there can be improvements i.e. display refresh lag through the dongle could be tightened up and an option to address overscan.
Now it was a bit of a chore to get this working. Here's the current config on my phone, as reference for your efforts:
- Jedi X9 ROM
- stock T889UVALK8 kernel
- stock T889UVALL4 baseband
- Tri-Angle away showing '0'
- Device is reported as being 'modified'
So it seems as if DRM checks the kernel and number of flashes, IMHO. I'll update the kernel, once the LTE update comes out and if a new kernel is required for it to work (hopefully it's just the modem). I don't want to update the kernel just yet, as I don't want to risk losing root. I know that there are ways to recover it, but the features in the new factory ROM weren't enough to invest the possible recovery time.
Good luck!
Click to expand...
Click to collapse
I would like to know if anyone has tried this method after using either the saber kernel 9 or 10, and if so what performance hits we take for going stock, would really like to use my Allshare dongle... Thanks
I will try stock kernel over the weekend and let you guys know how it went...
Right now I'm on Perseus kernel with stock deodexed LL4 and TWRP recovery.
(I should remember to make a nand before changing the kernel...right?...lol...)
Pretty sure I remember seeing you need to have stock recovery for it to work right. Or you have to use triangle away first, which, since I don't have stock recovery right now, is what I've been having to do each time. Haven't had to time to put everything back to stock but as soon as I get the chance I'll report back.
All you need is stock kernel after that use triangle away and your good to go. Then If by any chance you need to use recovery I.E cwm/twrp... just remember you will have to use triangle away after use. Now has anyone got it working on any other kernel other than stock? ?? Please let me know
Sent from my SGH-T889 using xda app-developers app
tried stock kernel plus TA
salmanaman said:
All you need is stock kernel after that use triangle away and your good to go. Then If by any chance you need to use recovery I.E cwm/twrp... just remember you will have to use triangle away after use. Now has anyone got it working on any other kernel other than stock? ?? Please let me know
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
I tried Jedi X9 with a stock kernel, and tried every option on triangle away paid version, but no Allshare cast connection ugh. I am guessing that I have to flash the modem to stock as well? Honestly this is not something that I want to do without at least an encouraging "this worked for me"... Anyone? Thanks.
premiatul said:
I will try stock kernel over the weekend and let you guys know how it went...
Right now I'm on Perseus kernel with stock deodexed LL4 and TWRP recovery.
(I should remember to make a nand before changing the kernel...right?...lol...)
Click to expand...
Click to collapse
It didn't work with stock kernel either. I will try with stock recovery also and see how it works.
Sent from my SGH-T889 using xda premium
You need to use triangle away correctly explain the procedure you use that you determine triangle away is working for you.
Sent from my SGH-T889 using xda app-developers app
---------- Post added at 05:02 PM ---------- Previous post was at 05:02 PM ----------
premiatul said:
It didn't work with stock kernel either. I will try with stock recovery also and see how it works.
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
You dont need stock recovery
Sent from my SGH-T889 using xda app-developers app
salmanaman said:
You need to use triangle away correctly explain the procedure you use that you determine triangle away is working for you.
Sent from my SGH-T889 using xda app-developers app
---------- Post added at 05:02 PM ---------- Previous post was at 05:02 PM ----------
You dont need stock recovery
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
I'm on Jedi X8 with CWM recovery and I just have to use triangle away before I use the hub. Granted I have to do it EVERY time but that could be cause by a reboot too maybe.
salmanaman said:
You need to use triangle away correctly explain the procedure you use that you determine triangle away is working for you.
Sent from my SGH-T889 using xda app-developers app
---------- Post added at 05:02 PM ---------- Previous post was at 05:02 PM ----------
You dont need stock recovery
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
I used all the features of triangle away (free version).
When I was on Perseus it was changing it on the spot, with stock kernel it had to go into a special recovery to do it, but upon reboot the flash was again showing 1.
None of the above works.
Sent from my SGH-T889 using xda premium
premiatul said:
I used all the features of triangle away (free version).
When I was on Perseus it was changing it on the spot, with stock kernel it had to go into a special recovery to do it, but upon reboot the flash was again showing 1.
None of the above works.
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
Mine has to go into special recovery too and yes I believe it still shows 1 but the hub will work. Have you actually TRIED using it? Dumb question I know but dumb questions have to be asked sometimes.
tony yayo said:
Mine has to go into special recovery too and yes I believe it still shows 1 but the hub will work. Have you actually TRIED using it? Dumb question I know but dumb questions have to be asked sometimes.
Click to expand...
Click to collapse
No questions are dumb, better safe than sorry. ...lol
Yes, I did try it after each change. I think I might try to go completely stock this weekend, just to see how it works.
Sent from my SGH-T889 using xda premium
I have seen a couple of different threads with different links to stock rooted roms. I am just having a hard time figuring out which is the correct one.
I am ultimately looking for a stock rooted rom that would have original recovery and original kernel. I am hoping that it can also automatically reset the flash counter. I am trying to be able to use my Samsung Allshare Cast Wireless Hub.
Any help would be greatly appreciated!
cmdauria said:
I have seen a couple of different threads with different links to stock rooted roms. I am just having a hard time figuring out which is the correct one.
I am ultimately looking for a stock rooted rom that would have original recovery and original kernel. I am hoping that it can also automatically reset the flash counter. I am trying to be able to use my Samsung Allshare Cast Wireless Hub.
Any help would be greatly appreciated!
Click to expand...
Click to collapse
+1
Try going to this thread, and follow billards instruction.
All thanks to them and the entire team. {ROM}{TEAM REJECTZ}{LORJAY589} MK4 Knox Free Full Rom Odex/Deodex Updated 12/4
http://forum.xda-developers.com/showthread.php?t=2541395
{ROM}{TEAM REJECTZ}{LORJAY589} MK4 Knox Free Full Rom Odex/Deodex Updated 12/4
Sent from my SPH-L900 using Tapatalk
cmdauria said:
I have seen a couple of different threads with different links to stock rooted roms. I am just having a hard time figuring out which is the correct one.
I am ultimately looking for a stock rooted rom that would have original recovery and original kernel. I am hoping that it can also automatically reset the flash counter. I am trying to be able to use my Samsung Allshare Cast Wireless Hub.
Any help would be greatly appreciated!
Click to expand...
Click to collapse
tbrne said:
+1
Click to expand...
Click to collapse
evo_like said:
Try going to this thread, and follow billards instruction.
All thanks to them and the entire team. {ROM}{TEAM REJECTZ}{LORJAY589} MK4 Knox Free Full Rom Odex/Deodex Updated 12/4
http://forum.xda-developers.com/showthread.php?t=2541395
{ROM}{TEAM REJECTZ}{LORJAY589} MK4 Knox Free Full Rom Odex/Deodex Updated 12/4
Sent from my SPH-L900 using Tapatalk
Click to expand...
Click to collapse
If either of you are running 4.3 there's a fix that I can confirm works 100% and you can have root and custom recovery...........
Use a root explorer and move the file linked to [system / lib folder] then adjust the permissions and reboot....done !
File is originally from this thread...http://forum.xda-developers.com/showthread.php?t=2542509
However flashing the file through recovery will cause a bootloop....so manually install following the above steps
4.3 or 4.1 ?
cmdauria said:
I have seen a couple of different threads with different links to stock rooted roms. I am just having a hard time figuring out which is the correct one.
I am ultimately looking for a stock rooted rom that would have original recovery and original kernel. I am hoping that it can also automatically reset the flash counter. I am trying to be able to use my Samsung Allshare Cast Wireless Hub.
Any help would be greatly appreciated!
Click to expand...
Click to collapse
If your looking for 4.1, I flashed this yesterday, and you have the option to root or not during the process, worked great for me. I went back to stock and updated to 4.3 via kies.
http://forum.xda-developers.com/showthread.php?t=2086769