OK...
The locks on my phone are very redundant to say the least.
In order to get to my home screen I have to do the following:
1. Press the button on top of the phone.
2. Slide the first lock down.
3. Draw in my security code to get past the lock out.
Step 3 can be shut on and off but I like this security so people can't mess with my phone. However considering I have to do step 1 before and step two also, it seems a tad over kill.
Can I disable step 2, the slide down lock screen?
Basically when I press the button on the top of the phone I want to be RIGHT at the screen where I draw in my lock pattern and or hit emergency call. I was unable to find anything in the settings. Did I miss it or is it really not there? If it's not there is there any other way to do it?
I'll fully rooted if that helps.
Try "No Lock" in the Market. It gets rid of the lock screen (and has a toggle widget). Not sure the effect on the security though.
No Lock gets rid of both the slide to unlock and the security passcode entry. Very handy if you don't care about security, but you get your mail from an Exchange server and they force you to have a security password.
Don't know how to just get rid of the slide to unlock.
i have a droid incredible with the same setup..sorta...i am running virtuous2.7
have u found a way to do this without No Lock?
You can do exactly what you're asking for with Switch Pro widget
nebenezer said:
You can do exactly what you're asking for with Switch Pro widget
Click to expand...
Click to collapse
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?
snovvman said:
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?
Click to expand...
Click to collapse
Would like to know, as my buddy was asking me about this.
Sent From My HTC Evo 4G Using Tapa Talk Pro!
If you use cyanogen rom, add power control widget and add the lockscreen option. Any time that widget is off when you hit the power button to unlock the phone you will go straight to pattern lock or home screen if you don't have one.
Sent from my PC36100 using XDA App
I would pay for an app/widget that handled this...
delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).
deathsled said:
delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).
Click to expand...
Click to collapse
I'm aware of this mod. People should be aware that you will need root access to delete the file. At the same time, I read that even with the AOSP/standard/vanilla lock screen, it (the standard lock screen) does NOT go away when the pattern lock is ENABLED.
For the Nexus 1, the standard lock DOES go away when pattern is ON, but it does not seem so with the Evo.
Can someone verify/dispute?
Thanks.
I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.
CzarMatt said:
I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.
Click to expand...
Click to collapse
Thanks. 1st post for CzarMat!!! Exactly my point--we need to find a way to make the Vanilla lock go away when pattern lock is enabled. But how??
This is all a bit redundant if the OP has Exchange security enabled on his device, which he has yet to clarify (unless I missed something).
I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1
is there any way to edit or app that enables a longer time period before the lock pattern screen comes up? LIke i think the max is like 15min
I want to be able to at least set the lock pattern screen to a 1hr interval, maybe 2hr
is this possible somehow?
Well, you can hit the "menu" capacitive button instead of sliding for a quicker unlock to the pattern security screen. That's what I normally do since it's a bit of finger acrobactics from the power button->aosp slide unlock->pattern screen.
jaypeezee said:
I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1
Click to expand...
Click to collapse
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.
CzarMatt said:
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.
Click to expand...
Click to collapse
Excellent news! Still looking for a solution. I think simulating a "menu" press will unlock the screen. Looking foward to it. Thanks!!
anyone come up with a solution for this?
I have my phone setup so I can use a gesture in cm 6.1 to unlock the screen. As a result, I have android screen lock security disabled and I have cm disable the sliders.
Now here is the issue:
The phone can still be unlocked by simply flipping the keyboard open. The only way to disable this as far as I know is to enable android screen lock - which in turn means after providing the unlock gesture I again have to provide a passcode or pattern.
Can someone please advise on how to prevent the keyboard open from unlocking the screen without enabling the stock android screen lock security. It would be much appreciated.
Sent from my HTC Vision using XDA App
sundar2012 said:
I have my phone setup so I can use a gesture in cm 6.1 to unlock the screen. As a result, I have android screen lock security disabled and I have cm disable the sliders.
Now here is the issue:
The phone can still be unlocked by simply flipping the keyboard open. The only way to disable this as far as I know is to enable android screen lock - which in turn means after providing the unlock gesture I again have to provide a passcode or pattern.
Can someone please advise on how to prevent the keyboard open from unlocking the screen without enabling the stock android screen lock security. It would be much appreciated.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
I don't believe this is possible. No app, setting or otherwise I've encountered is able to keep the keyboard opening from unlocking the device. Your best bet would be to google search something like "disable unlock when keyboard flipped out G2".
I found the solution. Used the screen off app posted in the g2 dev section. Made a tasker profile to launch it on keyboard open and display unlocked. Relocks the phone if anyone tries to unlock with kkeyboard.
Sent from my HTC Vision using XDA App
This question has definitely been asked before but I haven't found any real solutions to the problem. How can I disable the swipe/drag to unlock feature without disabling the lock screen?
I've already tried NoLock and other 3rd party apps and while they have worked, they all usually disable the lock screen along with the swipe to unlock button.
I've found that when it comes to the Android OS, there is more than one way to do something. Since I have root, is there any file that can be edited to disable the swipe to unlock screen without disabling the pin code/pattern lock?
This has been bothering me for quite a while. I'm really hoping there is some file on the OS that I can edit and disable the swipe to unlock feature.
So, anyone know how?
How the hell are you supposed unlock the screen?? That's my question if your getting rid of the slider/tab what's going to unlock it? I'm lost your question makes no sense...
http://i1202.photobucket.com/albums/bb374/TexasEpic/Biggoron3.png
Sent From My Cyan Samurai
Enabling pin or pattern lock is suppose to disable the stock lockscreen.
Sent from my SPH-D700 using Tapatalk
Big Goron said:
How the hell are you supposed unlock the screen?? That's my question if your getting rid of the slider/tab what's going to unlock it? I'm lost your question makes no sense...
http://i1202.photobucket.com/albums/bb374/TexasEpic/Biggoron3.png
Sent From My Cyan Samurai
Click to expand...
Click to collapse
What this person is asking is if there is a way to disable the screen with the time/date that says "Swipe screen to unlock". If you have a security lock screen with pin, pattern, etc or an application like "Go Locker," you still have the annoying "Swipe screen to unlock" that displays first. You have to swipe it on that screen, and then you are on the next Lock Screen to enter your pin, pattern, etc. It is two layers of protection. Many people are finding the "Swipe screen to unlock" annoying when they have a security screen that is also configured.
Hello,
I was wondering if there was a way to allow widgets in conjunction with a pattern lock screen. My widget locker setup works fine but part of it has a camera hot-spot using uccw. The problem is that every time I click on it, I must input my pattern to access the camera. This is the same with every other widget on my lock screen. I am confused because with the sense lock, you are able to access the camera without entering the pattern. It is only until you try to exit out of the camera that it'll ask you for the pin- this feature is something htc calls "tourist mode" I believe.
Is this possible with WidgetLocker? Why must the pin be entered in order to access any of the widgets. Is there a way to only require the pattern for the phone unlocking process instead?
Thanks
I have lollipop and latest google services installed.
In Security I see an option to add smart lock as trusted agents
Then in lock screen options I select 'pattern lock' as my default and set smart lock to disable lock screen when I'm at home.
It works almost as I would expect it would work. At home I still see lock screen but the 'swipe' one with some apps at the bottom. When I try to unlock, it still asks me for the pattern code.
So it looks like at home it adds 'swipe' lock screen on my pattern one.
Edit:
Funny thing but I can click on the bottom icons and it unlocks without pattern and launches the app.
Still, if I want to unlock to home screen, I need to enter code/pattern/password
Is this an expected behaviour?
same issue here
Hello every one,
I tried to sync my G3 Smart Lock with my car using bluetooth. My autoradio has been added in trusted devices but when i try to use my g3 on my car i have a padlocker on my screen and when i click on it i have to do my schema anyway...
Any chance that someone has the solution or is it a LG issue ?
thx for your help
I'm using Lollipop / 5.0 V20A Final KDZ NO BETA Rom
bodziec said:
I have lollipop and latest google services installed.
In Security I see an option to add smart lock as trusted agents
Then in lock screen options I select 'pattern lock' as my default and set smart lock to disable lock screen when I'm at home.
It works almost as I would expect it would work. At home I still see lock screen but the 'swipe' one with some apps at the bottom. When I try to unlock, it still asks me for the pattern code.
So it looks like at home it adds 'swipe' lock screen on my pattern one.
Edit:
Funny thing but I can click on the bottom icons and it unlocks without pattern and launches the app.
Still, if I want to unlock to home screen, I need to enter code/pattern/password
Is this an expected behaviour?
Click to expand...
Click to collapse
I am having troubles with Trusted places aswell. But, from what I can see in my case, the issue is that it requires the correct location for you to just unlock your phone without entering a code, but fails to aquire your current location. A temporary fix would be an app the fetches your location every time you wake your phone. As far as the bluetooth goes. It sounds like the app is having a conflict with always verifying your connected to the device while using it. Just an idea.