OK...
The locks on my phone are very redundant to say the least.
In order to get to my home screen I have to do the following:
1. Press the button on top of the phone.
2. Slide the first lock down.
3. Draw in my security code to get past the lock out.
Step 3 can be shut on and off but I like this security so people can't mess with my phone. However considering I have to do step 1 before and step two also, it seems a tad over kill.
Can I disable step 2, the slide down lock screen?
Basically when I press the button on the top of the phone I want to be RIGHT at the screen where I draw in my lock pattern and or hit emergency call. I was unable to find anything in the settings. Did I miss it or is it really not there? If it's not there is there any other way to do it?
I'll fully rooted if that helps.
Try "No Lock" in the Market. It gets rid of the lock screen (and has a toggle widget). Not sure the effect on the security though.
No Lock gets rid of both the slide to unlock and the security passcode entry. Very handy if you don't care about security, but you get your mail from an Exchange server and they force you to have a security password.
Don't know how to just get rid of the slide to unlock.
i have a droid incredible with the same setup..sorta...i am running virtuous2.7
have u found a way to do this without No Lock?
You can do exactly what you're asking for with Switch Pro widget
nebenezer said:
You can do exactly what you're asking for with Switch Pro widget
Click to expand...
Click to collapse
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?
snovvman said:
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?
Click to expand...
Click to collapse
Would like to know, as my buddy was asking me about this.
Sent From My HTC Evo 4G Using Tapa Talk Pro!
If you use cyanogen rom, add power control widget and add the lockscreen option. Any time that widget is off when you hit the power button to unlock the phone you will go straight to pattern lock or home screen if you don't have one.
Sent from my PC36100 using XDA App
I would pay for an app/widget that handled this...
delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).
deathsled said:
delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).
Click to expand...
Click to collapse
I'm aware of this mod. People should be aware that you will need root access to delete the file. At the same time, I read that even with the AOSP/standard/vanilla lock screen, it (the standard lock screen) does NOT go away when the pattern lock is ENABLED.
For the Nexus 1, the standard lock DOES go away when pattern is ON, but it does not seem so with the Evo.
Can someone verify/dispute?
Thanks.
I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.
CzarMatt said:
I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.
Click to expand...
Click to collapse
Thanks. 1st post for CzarMat!!! Exactly my point--we need to find a way to make the Vanilla lock go away when pattern lock is enabled. But how??
This is all a bit redundant if the OP has Exchange security enabled on his device, which he has yet to clarify (unless I missed something).
I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1
is there any way to edit or app that enables a longer time period before the lock pattern screen comes up? LIke i think the max is like 15min
I want to be able to at least set the lock pattern screen to a 1hr interval, maybe 2hr
is this possible somehow?
Well, you can hit the "menu" capacitive button instead of sliding for a quicker unlock to the pattern security screen. That's what I normally do since it's a bit of finger acrobactics from the power button->aosp slide unlock->pattern screen.
jaypeezee said:
I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1
Click to expand...
Click to collapse
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.
CzarMatt said:
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.
Click to expand...
Click to collapse
Excellent news! Still looking for a solution. I think simulating a "menu" press will unlock the screen. Looking foward to it. Thanks!!
anyone come up with a solution for this?
Related
"Locking" the keypad on my old candy bar phone made sense - if you didn't, buttons were always pressed and people were sometimes dialed from your pocket. I can also see the case for a lockscreen on the iPhone, for example, since maybe its home button can be pressed accidentally as well. However, for the EVO and for the Pre I had before it, the only way to turn on the device is via the power button up top, which is surely not going to be pressed on accident (especially with the EVO where it's only slightly raised and must be pressed deliberately). Because of this, the lockscreen serves practically no purpose, except to add an extra redundant step before using your phone. It might be more useful if it showed all recent notifications on it webOS-style, but since it only shows the most recent one, it's not very good for that either, and it isn't a big deal to pull down the shade once you're in the phone.
So, unless you actually secure your phone with a password/gesture/PIN, is there really any point to the lockscreen?
Im going to go on a guess here but the purpose of the lock screen is , in the event that the phone is in your pocket "Granted highly unlikely" the button does get pushed another process of slidding your finger down the screen to unlock would also be needed . I believe the phone sitting in a pocket or a purse or case it would be even more difficult for the sliding motion on the screen to happen . Just an extra safe guard more or less .
You can use SwitchPro Widget to disable the lockscreen if you want.
Because its part of Android and the Evo isn't the only Android phone.
...yep.
nebenezer said:
You can use SwitchPro Widget to disable the lockscreen if you want.
Click to expand...
Click to collapse
Is there an app or a way to just use the pattern lock as opposed to the slide down lock? I'd rather just have the pattern lock when unlocking rather than the swipe screen lock and then a pattern lock.
Also no lock works like a charm.
Sent from my EVO using XDA App
engagedtosmile said:
Because its part of Android and the Evo isn't the only Android phone.
...yep.
Click to expand...
Click to collapse
This is one reason. The other is simply because iPhone has it and it is Android competition, there is no denying that the development tries to outdo each other.
I do understand the OP's reasoning, with the build of HTC EVO 4G, lockscreen is not necessary. On the other hand, it is advised to lock your screen with either PIN or pattern just in case you lose your device. It is part of personal security responsibility.
ritzbrie said:
Is there an app or a way to just use the pattern lock as opposed to the slide down lock? I'd rather just have the pattern lock when unlocking rather than the swipe screen lock and then a pattern lock.
Click to expand...
Click to collapse
I'm using the latest CM6 nightly ( so i have the Vanilla lockscreen ) & if i have a pattern set, that is what i see when i press the power button, & after entering the pattern, my phone is unlocked. No need to swipe before or after.
Not sure what ROM you're using, but if it possible to use the Vanilla Lockscreen, you can probably get the same result.
Veritas06 said:
I'm using the latest CM6 nightly ( so i have the Vanilla lockscreen ) & if i have a pattern set, that is what i see when i press the power button, & after entering the pattern, my phone is unlocked. No need to swipe before or after.
Not sure what ROM you're using, but if it possible to use the Vanilla Lockscreen, you can probably get the same result.
Click to expand...
Click to collapse
Stock Sense, unrooted. If you put the pattern on you first have to unlock the screen before you can do the pattern. It is pretty retarded.
My phone's screen turns on occasionally for certain notifications and alerts, and if it isn't for the lockscreen, in the 30 seconds it takes for the screen to turn off again, i can easily butt-dial someone or do something else stupid.
ritzbrie said:
Stock Sense, unrooted. If you put the pattern on you first have to unlock the screen before you can do the pattern. It is pretty retarded.
Click to expand...
Click to collapse
It doesn't do this anymore with froyo, you can change the settings so it doesn't do the swipe only the unlock pattern or vice versa.
bluehaze said:
It doesn't do this anymore with froyo, you can change the settings so it doesn't do the swipe only the unlock pattern or vice versa.
Click to expand...
Click to collapse
Are their any special instructions for doing this? Im on Evo with 2.2 and I still get the swipe screen with the pattern or PIN enabled.
bluehaze said:
It doesn't do this anymore with froyo, you can change the settings so it doesn't do the swipe only the unlock pattern or vice versa.
Click to expand...
Click to collapse
Are you sure...I don't see such a setting.
lacrossev said:
My phone's screen turns on occasionally for certain notifications and alerts, and if it isn't for the lockscreen, in the 30 seconds it takes for the screen to turn off again, i can easily butt-dial someone or do something else stupid.
Click to expand...
Click to collapse
I'm sorry, normally I wouldn't clutter up xda with an off topic post, but I actaully lol'ed at butt-dial - never heard that term before
bluehaze said:
It doesn't do this anymore with froyo, you can change the settings so it doesn't do the swipe only the unlock pattern or vice versa.
Click to expand...
Click to collapse
I too was unable to get this to work. I saw no setting to disable the slick to unlock.
you would really think it would be near impossible to butt-dial someone on the EVO, but leave it to me to prove to be the exception to the rule, I had the lock screen enabled even!!! and somehow in my pocket I called the same guy like 3 times over on the drive home one day... lucky it was a good friend of mine.
Come on, we all know why: Because the iPhone had one. If every other phone didn't have a lock screen, imagine the kind of elitist harassment we'd get from the Apple camp.
"Oh, your screen just comes on? Strange. My iPhone has a lock screen. I just swipe my finger and it unlocks, it's way cool. I can even put a lock code on it. But, no, your phone is cute. I like the little robot guy."
And so forth.
mrass26 said:
you would really think it would be near impossible to butt-dial someone on the EVO, but leave it to me to prove to be the exception to the rule, I had the lock screen enabled even!!! and somehow in my pocket I called the same guy like 3 times over on the drive home one day... lucky it was a good friend of mine.
Click to expand...
Click to collapse
wait, what the hell...? You keep your phone in your back pocket? sitting on it?
May the Evo gods have pity on your soul... don't you know it gets its own front pocket, no keys, no coins, no lint, no nothing!
ScrapMaker said:
wait, what the hell...? You keep your phone in your back pocket? sitting on it?
May the Evo gods have pity on your soul... don't you know it gets its own front pocket, no keys, no coins, no lint, no nothing!
Click to expand...
Click to collapse
Lol...I dedicated a pocket too. Nothing is allowed in my right front pocket but my phone. I have to force myself because with my g1 I had gotten to the point where I didn't care.
ccicchitelli said:
I too was unable to get this to work. I saw no setting to disable the slick to unlock.
Click to expand...
Click to collapse
It may be different depending on which ROM you're running, but I was able to get the pattern unlock without the slide unlock with CM6 RC1 using this method:
- Settings
- Location and Security
- Set up screen lock
- Pattern (add pattern here)
Hey fellas, to lock my phone I use the pattern lock, but since yesterday every time I lock the phone with power button or sleeps itself after 2 minutes, it doesn't show me the 'draw pattern screen', just the regular 'slide to unlock'.
So, I go and set the pattern up again, and lock it, it shows the 'draw pattern screen' and only shows once, after I lock the phone again, it won't appear anymore.
I'm using CM6.1.1, obviously rooted phone.
Any help or suggestions? Moderators feel free to move this post to cyanogen's thread if needed. Don't know if this might be a problem of CM itself.
Did you enable any of the quick unlock settings in Cyanogenmod settings? I bet my breakfast (which I already ate, sorry) that its because you need to review those CM settings. In User Input or something or other.
Uncheck all of those settings (that enable quick unlock)
(besides those pattern locks are easily hacked -- with the right light and the right amount of grease from your finger anyone can see your "path to unlock" - Im just sayin!)
Sorry man, that quick unlock feature is definetly not checked, it's under "settings/cyanogenmod settings/input settings", quick unlock not checked.
U owe me a pancake lol.
I dont remember getting creative with locking and unlocking settings, the weirdest thing I did was to install a few themes to the phone. Imma try putting everything to default, and start from there.
I've experienced some unlock and lock issues with cm6 aswell. It seemed as if there are settings that conflict with eachother. What happened to me was I changed it to rotory unlock with lock set to immediately engage on screen off. After changing that it wouldn't lock but the screen would turn off. I had to set it to 1 second and then reboot then it would lock just fine.
Sent from my HTC Vision using XDA App
What surprises me is that it stopped working for some reason, because I've been using cm6.1.1 for a couple of weeks and worked perfectly..
Sent from my HTC Vision using XDA App
don't remember where the setting is but it sounds like the time-out setting is not proper, the phone does not lock right away if it is sitting on the table and goes to sleep on it's own but you can set it to do that, i had mine set to 30 seconds so that if the screen turned off while i was waiting for something to download or happen i didn't have to unlock with my pin each time. look through the settings (probably security or cm settings) for the proper tweak, i would give better instructions but i'm currently on miui ROM
g_grey said:
don't remember where the setting is but it sounds like the time-out setting is not proper, the phone does not lock right away if it is sitting on the table and goes to sleep on it's own but you can set it to do that, i had mine set to 30 seconds so that if the screen turned off while i was waiting for something to download or happen i didn't have to unlock with my pin each time. look through the settings (probably security or cm settings) for the proper tweak, i would give better instructions but i'm currently on miui ROM
Click to expand...
Click to collapse
Yeah, these settings are found under CM Settings->User Interface (down at the bottom). I don't think these will be the cause though, since the OP said he didn't really mess with any of the settings. Also, I don't think the settings would cause the "Slide to Unlock" screen to appear (the phone would simply turn the screen back on to whatever was last on, no pattern unlock, no lock screen).
Have you installed any new widgets or lockscreen apps recently? Out of curiosity, have you tried any of the other lock types just to see if they do the same thing (like PIN or password).
Hi All!
I found a few threads on the Internet in different forums with no answer so I thought I'll ask the pros:
When I'm using Pin or Password to unlock the phone, I get the standard lockscreen display before I can unlock the phone, so it goes:
On/Off Button -> Lock Screen -> Pin / Password
The problem is when I'm using an unlock pattern, the lock screen gets skipped, so it goes:
On/Off Button -> Unlock Pattern
This is very annoying since I like to use the lockscreens mute function without having to unlock the phone. Apparently there is no way of changing this with settings so I was wondering if anyone know of a patch or another way to have the lockscreen AND the unlock pattern?
I'm using the Oxygen 2.0 RC6 Gingerbread Rom on my Desire but this seems to be a generel "issue" with stock Android Roms (Hero Roms and Froyo Roms is the same) - Sense based Roms behave different.
Thx for any hint!
*bump*
I am having a similar issue and my searching only found this thread.
While at work (2/3rds of my waking life) I use my phone at work to see where my next appointment is. It's very convenient to just glance down and see what meeting I have next by only hitting the power button. From what I have seen there are a lot of apps which will add this functionality to the lock screen.
The problem is when I add a passcode (required by work) it replaces the unlock screen with the passcode screen. I have seen that other Android phones do not do this, but the Captivate does. I've tried four different roms and all have this same behavior.
Is it possible to have the unlock screen come up, and when the phone is unlocked to prompt the passcode? I can't find a setting anywhere and the third party apps like Flylock have a jarring user experience in this configuration.
Thanks
...
Mabus the Mad said:
Is it possible to have the unlock screen come up, and when the phone is unlocked to prompt the passcode? I can't find a setting anywhere and the third party apps like Flylock have a jarring user experience in this configuration.
Thanks
Click to expand...
Click to collapse
The purpose of the pattern lock is to prevent unauthorized use of the phone. So it doesn't make sense if you put the lock screen over the pattern lock(or combined them) as you, or any stranger, will be able to issue commands(mute, read messages, weather, music etc. there are lots of widgets running on the lock screen) to the phone BEFORE unlocking it.
The security of the pattern lock will be totally compromised.
So the only choice is pattern lock over lock screen. I don't see how this makes anything easier. And I won't go into how it will create huge security loopholes/bypass the pattern lock completely if widgets or anything is allow to run on/over the lockscreen.
Perhaps I am using the wrong terminology, I should be referring to it as the "Unlock Screen" (Settings -> Display -> Unlock Screen). From this screen it appears that you can:
1) View the time
2) Unlock the phone
3) Mute the phone
4) See the notification bar (Vibrate, Battery, Signal, Pending notifications, etc)
I would actually like to add:
5) Next calendar appointment with location
6) Weather
This is all actions / information I want available at a glance and without unlocking the phone. Once I attempt to unlock I would like to be presented with the pattern / pin security. In this way all my private information remains hidden, but the information I use the most often while walking / driving is readily available.
I am also good with anyone else being able to pick up my phone and perform the actions I listed on the unlock screen. I believe this information is available from the unlock screen on the Windows Phone and iPhone (assuming it's your only notification, their notification system sucks).
Mabus the Mad said:
This is all actions / information I want available at a glance and without unlocking the phone. Once I attempt to unlock I would like to be presented with the pattern / pin security. In this way all my private information remains hidden, but the information I use the most often while walking / driving is readily available.
Click to expand...
Click to collapse
That PERMISSION to allow you do issue commands to your phone will compromise the security of the pattern/pin lock screen. You need to understand the core concept of the pattern lock screen is to be secure - no unauthorized use of the phone, whether it's as small as viewing notifications to fullon running widgets/apps.
Plus your definition of being secure doesn't equate to everyone's definition of security. It fine for you to display messages on the securely locked phone but it's definitely not for some of my friends who have really sensitive data on their phone.
I was not trying to advocate this behavior to everyone, just wondering if it was possible to set this up myself. One of the things I like about this phone is that everyone can customize it to fit their own tastes.
Actually, I think I found my solution. Flashed to CM7 last night. The pattern screen still had the behavior as the 2.2 roms but the passcode had the behavior I was looking for.
Well the thing is: When using PIN or Password to unlock, you can actually use the lockscreen to mute etc. before unlocking. And using the original HTC Rom, this is possible using unlock pattern, too. Everyone will have to decide for themself if he cosiders this function a thread to security, its just really annoying that I have to decide between unlock pattern and unlock screen even tho it should not be a problem technicaly. Cyanogen guys apparently have this on their list, but with minor priority. I'm really close to moving back to a HTC rom actually...
this bugs me too.. I like the PATTERN cause it's kind of unique and cool plus when you enter your pattern there is no "OK" key you have to press like you do when using PIN/PASSWORD which for some reason annoys me.. I suppose it's another line of defense against prying eyes that make it that much more work to try different pin options.. I don't know maybe it's to annoy them into giving up?.. Anyways, I've opted to use the PIN option because I too like seeing the Lock Screen and any info it has and I really don't see it as that big a security hole seeing the small amount of info on the lock screen.. unless you're running a ROM or app that has popups for messages and such.. and if it really is then Google should make the behavior that you do pattern then to the lock screen. of course I'm sure their reasoning for this is the pattern is a more difficult form of security to breach so there is benefit and no harm from taking you straight into the unlocked phone once the correct pattern has been entered. that doesn't mean we have to agree with the mighty G on this and I'm sure either Devs cooking in the ROM kitchen could change the behavior if they saw the want in the community, maybe a patch could be made or an app that changes the behavior. anyways, that's my $.02
If any of you guys find a solution around this issue please let us know!
Haven't seen any solution yet, how about you guys?
I have been trying to get Widget Locker working on my One but have hit an issue. I am thinking I may not be able to fix this without Root but I wanted to run it by the community to verify.
I have my phone linked to an Exchange server that forces a 4 digit pass-code onto the device. So from the default lock screen I swipe up and then get the keypad to unlock the device.
Widget Locker replaces the main screen and 60% of the time when I unlock the device it takes me to the keypad directly.
The other 40% of the time is the issue. When I unlock from Widget Locker it takes me to the default screen where I would swipe up. From this point I can ether swipe up and unlock or shut off the screen. When I try again it usually works perfectly.
Is there any way to get consistent behavior from Widget Locker without root? What I would expect would be to unlock and be taken to the keypad 100% of the time.
I would love to use widget locker, but I always get a 3-7 second delay with turning on my phone. Sorry I can't help you.
calash said:
I have been trying to get Widget Locker working on my One but have hit an issue. I am thinking I may not be able to fix this without Root but I wanted to run it by the community to verify.
I have my phone linked to an Exchange server that forces a 4 digit pass-code onto the device. So from the default lock screen I swipe up and then get the keypad to unlock the device.
Widget Locker replaces the main screen and 60% of the time when I unlock the device it takes me to the keypad directly.
The other 40% of the time is the issue. When I unlock from Widget Locker it takes me to the default screen where I would swipe up. From this point I can ether swipe up and unlock or shut off the screen. When I try again it usually works perfectly.
Is there any way to get consistent behavior from Widget Locker without root? What I would expect would be to unlock and be taken to the keypad 100% of the time.
Click to expand...
Click to collapse
Go into Settings and set the HTC lockscreen to none. It forces the phone to only use WL, and you never see the stock lockscreen. Works for me,
gomorrah said:
Go into Settings and set the HTC lockscreen to none. It forces the phone to only use WL, and you never see the stock lockscreen. Works for me,
Click to expand...
Click to collapse
That kills the security on the phone. We need to have ether a pin or password unlock to secure the device. Even without it I would want a pattern unlock at the least to keep it somewhat safe.
I expanded my search a bit and this seems to be a common problem on phones that have any sort of lockscreen security. What I cant understand is why it does work some times, but not others. It does not appear to be a timing issue but I cannot narrow down what else would randomly (apparently random) trigger the stock lock screen yet work other times.
calash said:
That kills the security on the phone. We need to have ether a pin or password unlock to secure the device. Even without it I would want a pattern unlock at the least to keep it somewhat safe.
I expanded my search a bit and this seems to be a common problem on phones that have any sort of lockscreen security. What I cant understand is why it does work some times, but not others. It does not appear to be a timing issue but I cannot narrow down what else would randomly (apparently random) trigger the stock lock screen yet work other times.
Click to expand...
Click to collapse
No, it doesn't. The HTC lockscreen and the Security lockscreen are two different things. You can have the HTC lockscreen set to none, and still have the option to unlock with any of the various lock methods(i.e. PIN, Pattern, Face Unlock, etc...) I know this is true because I use it everyday. I use WL, have my HTC lockscreen set to none, and still have to enter a PIN to unlock my phone. And have no delay when using WL once the phone is booted.
gomorrah said:
No, it doesn't. The HTC lockscreen and the Security lockscreen are two different things. You can have the HTC lockscreen set to none, and still have the option to unlock with any of the various lock methods(i.e. PIN, Pattern, Face Unlock, etc...) I know this is true because I use it everyday. I use WL, have my HTC lockscreen set to none, and still have to enter a PIN to unlock my phone. And have no delay when using WL once the phone is booted.
Click to expand...
Click to collapse
And I am an idiot. You are completely correct. I am trying it now, thank you.
Edit: Working like a charm. If anybody else is having this issue the setting is under Personalize, lock screen style.
Thanks again!
Before installing the new Kit Kat upgrade, I had no password and was able to press the top power button to awaken or sleep the home screen without also having to swipe the little "lock" icon upward. With the new updated software, I now have to swipe the little lock every single time. So now I have two steps to complete before accessing my phone. Does anyone know how to remove it?
The first two options in the settings / security menu.
No Lock app
No Lock has been working for me: https://play.google.com/store/apps/details?id=org.jraf.android.nolock&hl=en
I'm rooted but running stock rom.
Blair
cmlusco said:
The first two options in the settings / security menu.
Click to expand...
Click to collapse
I have no screen lock at all on those settings and I still have to swipe to get to my home screen. This was removable in the previous update.
Huh? Set the first option to what kind of lockscreen you want pin pattern etc. Then put a check on the second option. This should bring up the security screen when the phone first wakes, then once you enter your pin pattern etc it should go straight to your home screen.
cmlusco said:
Huh? Set the first option to what kind of lockscreen you want pin pattern etc. Then put a check on the second option. This should bring up the security screen when the phone first wakes, then once you enter your pin pattern etc it should go straight to your home screen.
Click to expand...
Click to collapse
I do not want to have to swipe the "lock" icon. I never needed to before and now with KitKat I do. I'm wondering whether there is a way to remove that little feature.
These are my current settings.
I have no pin or lock, yet I still have to swipe the little lock up before accessing my home screen. Is there a way to go straight to my home screen without having to swipe the lock icon up?
That is very strange. I have the same settings for mine, screen lock none and the bypass lockscreen on wake box checked. When my phone is off and i hit the power button it goes straight to my home screen, no lock swipe involved.
Are you rooted?
cmlusco said:
That is very strange. I have the same settings for mine, screen lock none and the bypass lockscreen on wake box checked. When my phone is off and i hit the power button it goes straight to my home screen, no lock swipe involved.
Are you rooted?
Click to expand...
Click to collapse
Ditto. There must be something messed up with his rom or some app interfering with the settings.
There is also a setting for skipping the lock screen in the Sense 5 Toolbox so you could try that too if you're rooted and have Xposed.
No i think the reason it does this for me is because i have sense 5 toolbox and never realized it was an always on option. If your rooted, and dont want xposed or sense 5 toolbox, i made a flashable zip that will remove the lock screen.
http://forum.xda-developers.com/showthread.php?t=2642574
I'm not rooted.
Sent from my HTC6500LVW using xda app-developers app
Well then either root, or as stated in an earlier post try no lock from the market. Its free and does not require root.