I have my phone setup so I can use a gesture in cm 6.1 to unlock the screen. As a result, I have android screen lock security disabled and I have cm disable the sliders.
Now here is the issue:
The phone can still be unlocked by simply flipping the keyboard open. The only way to disable this as far as I know is to enable android screen lock - which in turn means after providing the unlock gesture I again have to provide a passcode or pattern.
Can someone please advise on how to prevent the keyboard open from unlocking the screen without enabling the stock android screen lock security. It would be much appreciated.
Sent from my HTC Vision using XDA App
sundar2012 said:
I have my phone setup so I can use a gesture in cm 6.1 to unlock the screen. As a result, I have android screen lock security disabled and I have cm disable the sliders.
Now here is the issue:
The phone can still be unlocked by simply flipping the keyboard open. The only way to disable this as far as I know is to enable android screen lock - which in turn means after providing the unlock gesture I again have to provide a passcode or pattern.
Can someone please advise on how to prevent the keyboard open from unlocking the screen without enabling the stock android screen lock security. It would be much appreciated.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
I don't believe this is possible. No app, setting or otherwise I've encountered is able to keep the keyboard opening from unlocking the device. Your best bet would be to google search something like "disable unlock when keyboard flipped out G2".
I found the solution. Used the screen off app posted in the g2 dev section. Made a tasker profile to launch it on keyboard open and display unlocked. Relocks the phone if anyone tries to unlock with kkeyboard.
Sent from my HTC Vision using XDA App
Related
OK...
The locks on my phone are very redundant to say the least.
In order to get to my home screen I have to do the following:
1. Press the button on top of the phone.
2. Slide the first lock down.
3. Draw in my security code to get past the lock out.
Step 3 can be shut on and off but I like this security so people can't mess with my phone. However considering I have to do step 1 before and step two also, it seems a tad over kill.
Can I disable step 2, the slide down lock screen?
Basically when I press the button on the top of the phone I want to be RIGHT at the screen where I draw in my lock pattern and or hit emergency call. I was unable to find anything in the settings. Did I miss it or is it really not there? If it's not there is there any other way to do it?
I'll fully rooted if that helps.
Try "No Lock" in the Market. It gets rid of the lock screen (and has a toggle widget). Not sure the effect on the security though.
No Lock gets rid of both the slide to unlock and the security passcode entry. Very handy if you don't care about security, but you get your mail from an Exchange server and they force you to have a security password.
Don't know how to just get rid of the slide to unlock.
i have a droid incredible with the same setup..sorta...i am running virtuous2.7
have u found a way to do this without No Lock?
You can do exactly what you're asking for with Switch Pro widget
nebenezer said:
You can do exactly what you're asking for with Switch Pro widget
Click to expand...
Click to collapse
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?
snovvman said:
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?
Click to expand...
Click to collapse
Would like to know, as my buddy was asking me about this.
Sent From My HTC Evo 4G Using Tapa Talk Pro!
If you use cyanogen rom, add power control widget and add the lockscreen option. Any time that widget is off when you hit the power button to unlock the phone you will go straight to pattern lock or home screen if you don't have one.
Sent from my PC36100 using XDA App
I would pay for an app/widget that handled this...
delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).
deathsled said:
delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).
Click to expand...
Click to collapse
I'm aware of this mod. People should be aware that you will need root access to delete the file. At the same time, I read that even with the AOSP/standard/vanilla lock screen, it (the standard lock screen) does NOT go away when the pattern lock is ENABLED.
For the Nexus 1, the standard lock DOES go away when pattern is ON, but it does not seem so with the Evo.
Can someone verify/dispute?
Thanks.
I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.
CzarMatt said:
I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.
Click to expand...
Click to collapse
Thanks. 1st post for CzarMat!!! Exactly my point--we need to find a way to make the Vanilla lock go away when pattern lock is enabled. But how??
This is all a bit redundant if the OP has Exchange security enabled on his device, which he has yet to clarify (unless I missed something).
I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1
is there any way to edit or app that enables a longer time period before the lock pattern screen comes up? LIke i think the max is like 15min
I want to be able to at least set the lock pattern screen to a 1hr interval, maybe 2hr
is this possible somehow?
Well, you can hit the "menu" capacitive button instead of sliding for a quicker unlock to the pattern security screen. That's what I normally do since it's a bit of finger acrobactics from the power button->aosp slide unlock->pattern screen.
jaypeezee said:
I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1
Click to expand...
Click to collapse
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.
CzarMatt said:
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.
Click to expand...
Click to collapse
Excellent news! Still looking for a solution. I think simulating a "menu" press will unlock the screen. Looking foward to it. Thanks!!
anyone come up with a solution for this?
Does anyone know how to disable the vanilla slide to unlock screen but keep something like the pattern lock on??? I've tried no lock from the market, but my pattern lock wouldn't come on. It's kind of retarted to have to slide to unlock the screen and enter a pattern lock. Thanks for any help.
btw, I'm running Calkulin's v.1.1 ROM.
Thought I'd try one more time to get it to the top? Anyone? Thanks.
-Slevin
Sent from my Sprint EVO using XDA App
NVETHIS said:
Thought I'd try one more time to get it to the top? Anyone? Thanks.
-Slevin
Sent from my Sprint EVO using XDA App
Click to expand...
Click to collapse
Doesn't he have the zip file on the 1st page of his thread?
What thread are you talking about? I,m a search dummy, I can't find anything about this stupid lock. Are you referring to Calkulins thread?
Sent from my EVO using XDA App
I got the zip, flashed it and how I have the older slide left/right lock, still I have to do that before I get my pattern. Ugh this is a pita lol. I just want the single pattern lock when I turn my screen off.
Sent from my EVO using XDA App
on CM6
the PIN and PWD option presents the user with the SlideLock...then the SecurityLock then the desktop.
the ZigZag option presents the user with the PatternLock then desktop.
I'm not running CM6....are those settings found in that rom? Is there no other way to just get the patter lock and no vanilla lock???
-Slevin
I know you can use switchpro to disable the lock screen but I've never tried it in conjunction with the pattern lock so I don't know of it would do what you're looking for but it's worth a shot.
I use switchpro, I'll give it a go and post back.
*edit- Yep! It does exactly what you're looking for So use switchpro to disable the lock screen and when you hit the power button to wake the phone up it goes directly to the pattern lock
nebenezer said:
I know you can use switchpro to disable the lock screen but I've never tried it in conjunction with the pattern lock so I don't know of it would do what you're looking for but it's worth a shot.
I use switchpro, I'll give it a go and post back.
*edit- Yep! It does exactly what you're looking for So use switchpro to disable the lock screen and when you hit the power button to wake the phone up it goes directly to the pattern lock
Click to expand...
Click to collapse
Is your lock screen the Sprint slide-down lock or the standard/vanilla lock? I ask because, with Switch Pro, it either unlocks both, or enables both (with the Sprint HTC slide-down lock).
Thanks.
didn't worked on Xperia x10 =(
Just wanted to add that disabling the lock screen with switch pro is awesome. I can't believe I never found that before.
Also, if you want to have ur volume buttons wake ur phone, try widget locker. Enable widget locker, then enable any hardware button wake, then use switch pro to disable screen lock then disable widget locker. Bam, volume key wake w/o lock screen, pure awesomeness.
Hey... I think this thing makes phone calls too!
To access camera on lock screen, I need to disable secure lock such as pattern lock or pin code lock so I can access camera from lock screen. Otherwise, it will unlock and ask for code to unlock before start camera. This annoy me.
If it possible to access camera from lock screen in case to enable pin code locked?
I remember that HTC incredible S ui can access camera from lock screen directly even the phone was enabled pin code lock.
Sent from my GT-N7100 using xda app-developers app
Bump this post.
I have corporate security on my Note 2, and I am unable to access Camera while locked. However you can do this on the Iphone. My policy administrator says it is a bug in the Android system. I have root, so I should be able to adjust anything. Anyone know where to make the change so that I can use my camera without unlocking my phone?
I have been trying to get Widget Locker working on my One but have hit an issue. I am thinking I may not be able to fix this without Root but I wanted to run it by the community to verify.
I have my phone linked to an Exchange server that forces a 4 digit pass-code onto the device. So from the default lock screen I swipe up and then get the keypad to unlock the device.
Widget Locker replaces the main screen and 60% of the time when I unlock the device it takes me to the keypad directly.
The other 40% of the time is the issue. When I unlock from Widget Locker it takes me to the default screen where I would swipe up. From this point I can ether swipe up and unlock or shut off the screen. When I try again it usually works perfectly.
Is there any way to get consistent behavior from Widget Locker without root? What I would expect would be to unlock and be taken to the keypad 100% of the time.
I would love to use widget locker, but I always get a 3-7 second delay with turning on my phone. Sorry I can't help you.
calash said:
I have been trying to get Widget Locker working on my One but have hit an issue. I am thinking I may not be able to fix this without Root but I wanted to run it by the community to verify.
I have my phone linked to an Exchange server that forces a 4 digit pass-code onto the device. So from the default lock screen I swipe up and then get the keypad to unlock the device.
Widget Locker replaces the main screen and 60% of the time when I unlock the device it takes me to the keypad directly.
The other 40% of the time is the issue. When I unlock from Widget Locker it takes me to the default screen where I would swipe up. From this point I can ether swipe up and unlock or shut off the screen. When I try again it usually works perfectly.
Is there any way to get consistent behavior from Widget Locker without root? What I would expect would be to unlock and be taken to the keypad 100% of the time.
Click to expand...
Click to collapse
Go into Settings and set the HTC lockscreen to none. It forces the phone to only use WL, and you never see the stock lockscreen. Works for me,
gomorrah said:
Go into Settings and set the HTC lockscreen to none. It forces the phone to only use WL, and you never see the stock lockscreen. Works for me,
Click to expand...
Click to collapse
That kills the security on the phone. We need to have ether a pin or password unlock to secure the device. Even without it I would want a pattern unlock at the least to keep it somewhat safe.
I expanded my search a bit and this seems to be a common problem on phones that have any sort of lockscreen security. What I cant understand is why it does work some times, but not others. It does not appear to be a timing issue but I cannot narrow down what else would randomly (apparently random) trigger the stock lock screen yet work other times.
calash said:
That kills the security on the phone. We need to have ether a pin or password unlock to secure the device. Even without it I would want a pattern unlock at the least to keep it somewhat safe.
I expanded my search a bit and this seems to be a common problem on phones that have any sort of lockscreen security. What I cant understand is why it does work some times, but not others. It does not appear to be a timing issue but I cannot narrow down what else would randomly (apparently random) trigger the stock lock screen yet work other times.
Click to expand...
Click to collapse
No, it doesn't. The HTC lockscreen and the Security lockscreen are two different things. You can have the HTC lockscreen set to none, and still have the option to unlock with any of the various lock methods(i.e. PIN, Pattern, Face Unlock, etc...) I know this is true because I use it everyday. I use WL, have my HTC lockscreen set to none, and still have to enter a PIN to unlock my phone. And have no delay when using WL once the phone is booted.
gomorrah said:
No, it doesn't. The HTC lockscreen and the Security lockscreen are two different things. You can have the HTC lockscreen set to none, and still have the option to unlock with any of the various lock methods(i.e. PIN, Pattern, Face Unlock, etc...) I know this is true because I use it everyday. I use WL, have my HTC lockscreen set to none, and still have to enter a PIN to unlock my phone. And have no delay when using WL once the phone is booted.
Click to expand...
Click to collapse
And I am an idiot. You are completely correct. I am trying it now, thank you.
Edit: Working like a charm. If anybody else is having this issue the setting is under Personalize, lock screen style.
Thanks again!
I have lollipop and latest google services installed.
In Security I see an option to add smart lock as trusted agents
Then in lock screen options I select 'pattern lock' as my default and set smart lock to disable lock screen when I'm at home.
It works almost as I would expect it would work. At home I still see lock screen but the 'swipe' one with some apps at the bottom. When I try to unlock, it still asks me for the pattern code.
So it looks like at home it adds 'swipe' lock screen on my pattern one.
Edit:
Funny thing but I can click on the bottom icons and it unlocks without pattern and launches the app.
Still, if I want to unlock to home screen, I need to enter code/pattern/password
Is this an expected behaviour?
same issue here
Hello every one,
I tried to sync my G3 Smart Lock with my car using bluetooth. My autoradio has been added in trusted devices but when i try to use my g3 on my car i have a padlocker on my screen and when i click on it i have to do my schema anyway...
Any chance that someone has the solution or is it a LG issue ?
thx for your help
I'm using Lollipop / 5.0 V20A Final KDZ NO BETA Rom
bodziec said:
I have lollipop and latest google services installed.
In Security I see an option to add smart lock as trusted agents
Then in lock screen options I select 'pattern lock' as my default and set smart lock to disable lock screen when I'm at home.
It works almost as I would expect it would work. At home I still see lock screen but the 'swipe' one with some apps at the bottom. When I try to unlock, it still asks me for the pattern code.
So it looks like at home it adds 'swipe' lock screen on my pattern one.
Edit:
Funny thing but I can click on the bottom icons and it unlocks without pattern and launches the app.
Still, if I want to unlock to home screen, I need to enter code/pattern/password
Is this an expected behaviour?
Click to expand...
Click to collapse
I am having troubles with Trusted places aswell. But, from what I can see in my case, the issue is that it requires the correct location for you to just unlock your phone without entering a code, but fails to aquire your current location. A temporary fix would be an app the fetches your location every time you wake your phone. As far as the bluetooth goes. It sounds like the app is having a conflict with always verifying your connected to the device while using it. Just an idea.