Develop Bugs

Disable lock/slide screen? Is there a way?

OK...
The locks on my phone are very redundant to say the least.
In order to get to my home screen I have to do the following:
1. Press the button on top of the phone.
2. Slide the first lock down.
3. Draw in my security code to get past the lock out.
Step 3 can be shut on and off but I like this security so people can't mess with my phone. However considering I have to do step 1 before and step two also, it seems a tad over kill.
Can I disable step 2, the slide down lock screen?
Basically when I press the button on the top of the phone I want to be RIGHT at the screen where I draw in my lock pattern and or hit emergency call. I was unable to find anything in the settings. Did I miss it or is it really not there? If it's not there is there any other way to do it?
I'll fully rooted if that helps.

Try "No Lock" in the Market. It gets rid of the lock screen (and has a toggle widget). Not sure the effect on the security though.

No Lock gets rid of both the slide to unlock and the security passcode entry. Very handy if you don't care about security, but you get your mail from an Exchange server and they force you to have a security password.
Don't know how to just get rid of the slide to unlock.

i have a droid incredible with the same setup..sorta...i am running virtuous2.7
have u found a way to do this without No Lock?

You can do exactly what you're asking for with Switch Pro widget

nebenezer said:
You can do exactly what you're asking for with Switch Pro widget
Click to expand...
Click to collapse
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?

snovvman said:
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?
Click to expand...
Click to collapse
Would like to know, as my buddy was asking me about this.
Sent From My HTC Evo 4G Using Tapa Talk Pro!

If you use cyanogen rom, add power control widget and add the lockscreen option. Any time that widget is off when you hit the power button to unlock the phone you will go straight to pattern lock or home screen if you don't have one.
Sent from my PC36100 using XDA App

I would pay for an app/widget that handled this...

delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).

deathsled said:
delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).
Click to expand...
Click to collapse
I'm aware of this mod. People should be aware that you will need root access to delete the file. At the same time, I read that even with the AOSP/standard/vanilla lock screen, it (the standard lock screen) does NOT go away when the pattern lock is ENABLED.
For the Nexus 1, the standard lock DOES go away when pattern is ON, but it does not seem so with the Evo.
Can someone verify/dispute?
Thanks.

I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.

CzarMatt said:
I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.
Click to expand...
Click to collapse
Thanks. 1st post for CzarMat!!! Exactly my point--we need to find a way to make the Vanilla lock go away when pattern lock is enabled. But how??

This is all a bit redundant if the OP has Exchange security enabled on his device, which he has yet to clarify (unless I missed something).

I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1

is there any way to edit or app that enables a longer time period before the lock pattern screen comes up? LIke i think the max is like 15min
I want to be able to at least set the lock pattern screen to a 1hr interval, maybe 2hr
is this possible somehow?

Well, you can hit the "menu" capacitive button instead of sliding for a quicker unlock to the pattern security screen. That's what I normally do since it's a bit of finger acrobactics from the power button->aosp slide unlock->pattern screen.

jaypeezee said:
I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1
Click to expand...
Click to collapse
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.

CzarMatt said:
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.
Click to expand...
Click to collapse
Excellent news! Still looking for a solution. I think simulating a "menu" press will unlock the screen. Looking foward to it. Thanks!!

anyone come up with a solution for this?

[Q] Notif Bar/Lock Screen Bug?

When my phone is unlocked and I access any entry in the notification pulldown screen (e.g., weather, email, USB connected......anything), I am taken to the lock screen and required to re-input my unlock pattern (or facial recognition). Since the phone is obviously unlocked when I tap on notification area, this seems like it may be a bug. Why return to the lock screen when the phone is already unlocked?
Is anybody else experiencing this behavior?
Merk

Merk07 said:
When my phone is unlocked and I access any entry in the notification pulldown screen (e.g., weather, email, USB connected......anything), I am taken to the lock screen and required to re-input my unlock pattern (or facial recognition). Since the phone is obviously unlocked when I tap on notification area, this seems like it may be a bug. Why return to the lock screen when the phone is already unlocked?
Is anybody else experiencing this behavior?
Merk
Click to expand...
Click to collapse
Mine did something like that for a little while....i'd just installed golocker but didn't have it set as the correct default I think.

Thanks for your response, Rocket_Science, but since I do not use the GO Launcher EX, I don't think the GO Locker will work on my phone. And I have no desire to install the GO Launcher. Still looking for a fix . . . .

I am going to bump this back up in the hope that some kind soul (who uses a password or gesture protected lock screen) will test their OG and let me know if they experience similar behavior: with your phone unlocked, access the notification pull down and tap on any item (weather, email, etc.). Are you taken to the item or do you return to the lock screen? I always get take to the lock screen and need to re-input my password to get access to the device.
Many thanks.
Merk

Merk07 said:
I am going to bump this back up in the hope that some kind soul (who uses a password or gesture protected lock screen) will test their OG and let me know if they experience similar behavior: with your phone unlocked, access the notification pull down and tap on any item (weather, email, etc.). Are you taken to the item or do you return to the lock screen? I always get take to the lock screen and need to re-input my password to get access to the device.
Many thanks.
Merk
Click to expand...
Click to collapse
This seems to be a known issue with Android 4.x when using an application that disables the lock screen for you. I use Llama, and I have it disable the lock screen automatically after it successfully connects to my home wifi. If I click on anything in the Notification area, the lock screen will appear and come up every time thereafter. As long as I don't click on any Notifications, it will not re-lock itself.
This happened to me on my HTC Evo 3D as well, so I thought it was a bug with Llama, but I saw the same issue mentioned with another application that performs a similar action.
This is probably something that would have to be reported to Google.

[Q] Widget Locker Help

I have been trying to get Widget Locker working on my One but have hit an issue. I am thinking I may not be able to fix this without Root but I wanted to run it by the community to verify.
I have my phone linked to an Exchange server that forces a 4 digit pass-code onto the device. So from the default lock screen I swipe up and then get the keypad to unlock the device.
Widget Locker replaces the main screen and 60% of the time when I unlock the device it takes me to the keypad directly.
The other 40% of the time is the issue. When I unlock from Widget Locker it takes me to the default screen where I would swipe up. From this point I can ether swipe up and unlock or shut off the screen. When I try again it usually works perfectly.
Is there any way to get consistent behavior from Widget Locker without root? What I would expect would be to unlock and be taken to the keypad 100% of the time.

I would love to use widget locker, but I always get a 3-7 second delay with turning on my phone. Sorry I can't help you.

calash said:
I have been trying to get Widget Locker working on my One but have hit an issue. I am thinking I may not be able to fix this without Root but I wanted to run it by the community to verify.
I have my phone linked to an Exchange server that forces a 4 digit pass-code onto the device. So from the default lock screen I swipe up and then get the keypad to unlock the device.
Widget Locker replaces the main screen and 60% of the time when I unlock the device it takes me to the keypad directly.
The other 40% of the time is the issue. When I unlock from Widget Locker it takes me to the default screen where I would swipe up. From this point I can ether swipe up and unlock or shut off the screen. When I try again it usually works perfectly.
Is there any way to get consistent behavior from Widget Locker without root? What I would expect would be to unlock and be taken to the keypad 100% of the time.
Click to expand...
Click to collapse
Go into Settings and set the HTC lockscreen to none. It forces the phone to only use WL, and you never see the stock lockscreen. Works for me,

gomorrah said:
Go into Settings and set the HTC lockscreen to none. It forces the phone to only use WL, and you never see the stock lockscreen. Works for me,
Click to expand...
Click to collapse
That kills the security on the phone. We need to have ether a pin or password unlock to secure the device. Even without it I would want a pattern unlock at the least to keep it somewhat safe.
I expanded my search a bit and this seems to be a common problem on phones that have any sort of lockscreen security. What I cant understand is why it does work some times, but not others. It does not appear to be a timing issue but I cannot narrow down what else would randomly (apparently random) trigger the stock lock screen yet work other times.

calash said:
That kills the security on the phone. We need to have ether a pin or password unlock to secure the device. Even without it I would want a pattern unlock at the least to keep it somewhat safe.
I expanded my search a bit and this seems to be a common problem on phones that have any sort of lockscreen security. What I cant understand is why it does work some times, but not others. It does not appear to be a timing issue but I cannot narrow down what else would randomly (apparently random) trigger the stock lock screen yet work other times.
Click to expand...
Click to collapse
No, it doesn't. The HTC lockscreen and the Security lockscreen are two different things. You can have the HTC lockscreen set to none, and still have the option to unlock with any of the various lock methods(i.e. PIN, Pattern, Face Unlock, etc...) I know this is true because I use it everyday. I use WL, have my HTC lockscreen set to none, and still have to enter a PIN to unlock my phone. And have no delay when using WL once the phone is booted.

gomorrah said:
No, it doesn't. The HTC lockscreen and the Security lockscreen are two different things. You can have the HTC lockscreen set to none, and still have the option to unlock with any of the various lock methods(i.e. PIN, Pattern, Face Unlock, etc...) I know this is true because I use it everyday. I use WL, have my HTC lockscreen set to none, and still have to enter a PIN to unlock my phone. And have no delay when using WL once the phone is booted.
Click to expand...
Click to collapse
And I am an idiot. You are completely correct. I am trying it now, thank you.
Edit: Working like a charm. If anybody else is having this issue the setting is under Personalize, lock screen style.
Thanks again!

[Q] How to remove lock widget

Before installing the new Kit Kat upgrade, I had no password and was able to press the top power button to awaken or sleep the home screen without also having to swipe the little "lock" icon upward. With the new updated software, I now have to swipe the little lock every single time. So now I have two steps to complete before accessing my phone. Does anyone know how to remove it?

The first two options in the settings / security menu.

No Lock app
No Lock has been working for me: https://play.google.com/store/apps/details?id=org.jraf.android.nolock&hl=en
I'm rooted but running stock rom.
Blair

cmlusco said:
The first two options in the settings / security menu.
Click to expand...
Click to collapse
I have no screen lock at all on those settings and I still have to swipe to get to my home screen. This was removable in the previous update.

Huh? Set the first option to what kind of lockscreen you want pin pattern etc. Then put a check on the second option. This should bring up the security screen when the phone first wakes, then once you enter your pin pattern etc it should go straight to your home screen.

cmlusco said:
Huh? Set the first option to what kind of lockscreen you want pin pattern etc. Then put a check on the second option. This should bring up the security screen when the phone first wakes, then once you enter your pin pattern etc it should go straight to your home screen.
Click to expand...
Click to collapse
I do not want to have to swipe the "lock" icon. I never needed to before and now with KitKat I do. I'm wondering whether there is a way to remove that little feature.
These are my current settings.
I have no pin or lock, yet I still have to swipe the little lock up before accessing my home screen. Is there a way to go straight to my home screen without having to swipe the lock icon up?

That is very strange. I have the same settings for mine, screen lock none and the bypass lockscreen on wake box checked. When my phone is off and i hit the power button it goes straight to my home screen, no lock swipe involved.
Are you rooted?

cmlusco said:
That is very strange. I have the same settings for mine, screen lock none and the bypass lockscreen on wake box checked. When my phone is off and i hit the power button it goes straight to my home screen, no lock swipe involved.
Are you rooted?
Click to expand...
Click to collapse
Ditto. There must be something messed up with his rom or some app interfering with the settings.
There is also a setting for skipping the lock screen in the Sense 5 Toolbox so you could try that too if you're rooted and have Xposed.

No i think the reason it does this for me is because i have sense 5 toolbox and never realized it was an always on option. If your rooted, and dont want xposed or sense 5 toolbox, i made a flashable zip that will remove the lock screen.
http://forum.xda-developers.com/showthread.php?t=2642574

I'm not rooted.
Sent from my HTC6500LVW using xda app-developers app

Well then either root, or as stated in an earlier post try no lock from the market. Its free and does not require root.

Send to Phone option

Is there a way to bypass the lockscreen when I choose the option "send to phone." My lockscreen is a simple swipe (the bubble one), no pattern or nonnumerical combo.
Also, when I tell the watch to "take me home," I have to take out my phone each time to set the location because it gets stuck on "calculating route" on my watch and says "check phone to continue."
Any ideas?

The watch is added to trusted devices in lollipop. .. .where you don't need to unlock even if you are on pattern or pin lock as long as you are in blue tooth range
Check out the location for your home is correct in gmaps
Sent from my SM-N910C using Tapatalk 2

I am aware of the trusted device, that's why I mentioned I just had a swipe unlock. No pattern or anything.
It's correct in Google Maps--it even pops up my address on the watch.

Does anybody have a solution to this? It's very annoying (both the navigation and not bypassing the swipe screen when pressing send to phone on watch).

Which phone/ROM you have as it works fine on CyanogenMod?

I'm on the AT&T Note 4. No root or ROMs available yet :\ I could understand there being an issue if I had a alphanumeric or pattern lock-screen, but seeing how I only have to swipe, I'm not sure why it just doesn't bypass it.