Hi all,
Thanks for a least looking at this thread and providing feedback. So here is my situation.
1. Bought EVO 4g from a friend who bought new phone and transferred his phone number from Sprint to Verizon so the phone does not have access to Sprint's network.
2. My wife has a crappy MetroPCS phone I would like to replace with the EVO 4g.
3. I have all the software that has been talked about in many threads here: diagnosis drivers, cdma workshop, prl, and a few other things which I can't remember.
4. I have rooted the phone with S-OFF and currently running MetrogenMod 4.5
Q1: Does the phone need to be on the Sprint network in order for me to get the phone working on MetroPCS?
Q2: After reading all of the forums it sounds like the phone will magically work on MetroPCS' network, but something tells me I'm missing something?
Q3: How do I get my wife's phone number transferred over to this phone? It seems I can only transfer the current phone number that the phone has even though it is not mine.
Thanks again in advance and I apologize if these questions have been asked before, but I did not see any.
Jamdev12
PS: Ok after reading and getting familiar with this stuff it seems there are two ways of doing this, but I rather get some expertise from someone first :
1. Easiest method. Call MetroPCS and request an ESN swap. Since I own both phones I don't foresee this as illegal and I've heard of people successfully getting this done.
2. Hardest method and possibly bricking the phone. Call Sprint and request MLS number. Then use the software that is available to get ESN from old phone and write it to the new phone. If done right, the new phone will act and connect as if it were the old phone.
To all, am I correct in the above assumptions?
You shouldn't need to call sprint for your msl..search the play store for "msl reader". It'll save you that hassle anyways. ....Did a quick search and found this guide over on af.. http://androidforums.com/evo-4g-all-things-root/538899-guide-metro-pcs-donor-flash.html .. I flashed to boost so thats the extent of my experience. Hope it helps.
Hi nrvlljr,
Thanks for this link. I will be trying this tonight and if I get it working, I'll post my findings. Wish me luck. :good:
jamdev12
jamdev12 said:
Hi nrvlljr,
Thanks for this link. I will be trying this tonight and if I get it working, I'll post my findings. Wish me luck. :good:
jamdev12
Click to expand...
Click to collapse
Break a leg buddy..Just make sure to follow the instructions to a tee and you'll be fine.
nrvlljr said:
Break a leg buddy..Just make sure to follow the instructions to a tee and you'll be fine.
Click to expand...
Click to collapse
Hi nrvlljr,
Thanks for the encouragement. Unfortunately it did not work for me. For some reason the phone is unable to log into the MetroPCS network as my old phone. One thing that confused me about the instructions was to save the nam1 and Nam2 data for my old phone because not once after that did I use this data to reprogram the new phone. All it says is to replace the ESN and meid numbers in the nvm folder and reboot.
Next I tried the MetroPCS tutorial in the developer forum to get MetroPCS working, ROM and everything without success. I'm able to connect via roaming, but not on my current phone number.
Anyways, if you or anyone here has any ideas, I would gladly appreciate it. At least the phone is not bricked, yet.
Thanks in advance.
jamdev12 said:
Hi nrvlljr,
Thanks for the encouragement. Unfortunately it did not work for me. For some reason the phone is unable to log into the MetroPCS network as my old phone. One thing that confused me about the instructions was to save the nam1 and Nam2 data for my old phone because not once after that did I use this data to reprogram the new phone. All it says is to replace the ESN and meid numbers in the nvm folder and reboot.
Next I tried the MetroPCS tutorial in the developer forum to get MetroPCS working, ROM and everything without success. I'm able to connect via roaming, but not on my current phone number.
Anyways, if you or anyone here has any ideas, I would gladly appreciate it. At least the phone is not bricked, yet.
Thanks in advance.
Click to expand...
Click to collapse
Ok, so after more fiddling, I was able to get Data working, but no talk and text. To get data working, I had to run DFS to import the latest PRL from MetroPCS into the phone. Once I did that and rebooted the phone, 3G started to work, but still could not get Talk and Text to work.
Then I did the worst thing that I could have done, I think. I order for me to get Talk and Text working, I took the phone to a MetroPCS. Well, I let them run the phone through Houdini and now Talk and Text work, but I can't get 3G to work even though I have a plan that has Talk, Text and Data and I have reloaded the MetroPCS PRL in the phone.
Has anyone ran into this problem? Would I have to get my phone off the MetroPCS database in order for me to get 3G running again? Any help would be gladly appreciated.
Hello, I, new here..
I have literally tried everything i have read from forum to forum, post to post, from installing DIAG drivers to QPST, apn, anycut, everything i have found and cannot make my EVO to connect to the web. My sister had this phone fully working (except 4G) and now that i transferred it to my account i make calls and text but not MMS or WEB. less 3G. I am very frustrated but willing to keep on reading instructions if anyone would be able to help!!. Thank you very much and you guys are doing a very great job. miraculously i am obtaining knowledge i never even though it existed! unfortunately havent being able to solve my problem.
jamdev12 said:
Ok, so after more fiddling, I was able to get Data working, but no talk and text. To get data working, I had to run DFS to import the latest PRL from MetroPCS into the phone. Once I did that and rebooted the phone, 3G started to work, but still could not get Talk and Text to work.
Then I did the worst thing that I could have done, I think. I order for me to get Talk and Text working, I took the phone to a MetroPCS. Well, I let them run the phone through Houdini and now Talk and Text work, but I can't get 3G to work even though I have a plan that has Talk, Text and Data and I have reloaded the MetroPCS PRL in the phone.
Has anyone ran into this problem? Would I have to get my phone off the MetroPCS database in order for me to get 3G running again? Any help would be gladly appreciated.
Click to expand...
Click to collapse
What kind of phone did you use for the donor flash? I had this problem with my old evo 4g. I had it donor flashed from a freeform 1. Even though I was paying for 3g the evo didnt get it. I assumed it was because my freeform didnt have 3g so the ESN being read by the network on my evo didnt require it to send 3g data. Just a guess
Related
What started out as an effort to get my migrated XV6800 to operate on Verizon's data network has taken a nasty turn for the worse... Here is the long, sordid story, and I would really appreciate help in getting this device back onto the Verizon network.
This was originally a Qwest phone. I unlocked it and flashed it with a Verizon ROM, the file name is _Verizon XV6800_RUU_TITAN_VZW_WWE_3.57.605.1_RS_TITAN_3.37. 75_OM_VZW_ShipFULL. After I did that the customization routines did not run. Frankly, I don't know if they were supposed to or not, but they didn't.
I couldn't get the phone to connect to the Verizon network, even on *228. Eventually I applied a PRL and then I was able to connect to *228, and option #3 got the phone onto the voice network. I used it as my cell phone for two weeks with no issues on the voice network. Still, I wasn't able to get data working.
These are the things I tried while troubleshooting the data issue:
* Loaded the carrier cab from DCD
* Forced a CDMA only connection to download new keys
* Loaded the newest Verizon ROMs I found while at their website (this is the first time I saw customization routines)
* Told Verizon to switch me from pay as you go data to unlimited data (though it looks like they never turned this on)
* Tried activating my PDA with a different Verizon number, and then re-activating it with my original Verizon number
* Did a hard reset
It's those last two steps that screwed me. After I swapped the number off the phone I wasn't able to get it back. I could get to option #3, but it wouldn't let me activate the phone. Their tech support is no help and they are shocked when they look back at my account history and see that I was able to use *228 to get this phone on their network two weeks ago.
I then did a hard reset and got myself all the way back to the point where I was before I manually put the PRL in place. When I dial *228 I get the following: "Your account is not authorized to make calls to this phone number. I you would like to have additional capabilities added to your account please call customer service. Message 4, swich 691". I'm guessing that installing a PRL on the phone will now let me use option #3, because that's what made it work last time. However, I'm looking for instructions since I messed up somewhere in the process last time.
I just tried the following, but I get a recording saying they are unable to activate my phone at this time and then it tried to connect me to a person.
1. Install PRL
2. Install carrier cab
3. Install MMS cab
4. Run *228, #3
I know the person is just going to tell me that they can't help because their system doesn't recognize the ESN.
So what's the verdict, can I expect to get this phone back onto the voice network, will it ever work on the data network? Any help that anyone can offer in resolving this would be greatly appreciated.
Wrong forum? Should this have gone into upgrades?
moved thread by request of OP as Q&A forum did not provide answers nor does the OP expect it to.
Best regards,
Flar
Since being able to dial *228, have you called customer service to pull a new key for your device? When I upgraded a xv6800 rom I was not able to dial *228 until I did that. It was a bit of work getting it to pull the new key, but they did it. They first walked me through a manual registration process, then I think they tried to push it through and that worked.
Is your phone a Verizon phone? The pickle I'm in is that mine is not. When they ask me for the ESN they say it's unrecognized and that's pretty much it. They say they can't help me get it on the network because it's not a Verizon phone.
mfreema said:
Since being able to dial *228, have you called customer service to pull a new key for your device? When I upgraded a xv6800 rom I was not able to dial *228 until I did that. It was a bit of work getting it to pull the new key, but they did it. They first walked me through a manual registration process, then I think they tried to push it through and that worked.
Click to expand...
Click to collapse
Yep mine is a verizon phone. I am wondering if this is a new implementation, because I have flashed several roms before and never had to call them to get my phone activated until about a month ago. When you dial *228 does it allow you to do a phone programing, I think it is option 1?
No. 1, 2, & 3 all fail. I just called tech support again, hoping getting a new A key would resolve this. He told me he couldn't give me an A key unless the phone's ESN was in the system and the only way to get it in there is through *228, #3... Kind of a Catch 22.
His last suggestion was that I activate a different PDA on my number and see if maybe the computer is choking because my current phone isn't a PDA, and this one is. Kind of sounds like clutching at straws, but he said at this point I've done all that can be done, short of that.
I find really odd, and extremely frustrating, that I can't find anyone else who has been through this with a non-Verizon phone.
mfreema said:
Yep mine is a verizon phone. I am wondering if this is a new implementation, because I have flashed several roms before and never had to call them to get my phone activated until about a month ago. When you dial *228 does it allow you to do a phone programing, I think it is option 1?
Click to expand...
Click to collapse
I bought an unlocked HTC touch pro 2 that was with T-mobile.
I have AT&T. My phone works good for calls and text messaging but the data plan does not work.
I called AT&T and they cant help me.
I called HTC..can't help me.
They both said to call T-Mobile and ask them to reset the data options because my phone is trying to read off of the T-mobile options but what that amounts to is that they just don't know what they are talking about.
My friend said this site will have the answer!
Can anyone..please..point me in the right direction on how to set up my phone so I can use the data plan for AT&T or am I screwed??
I am new at this so I don't understand the lingo but..do I need to flash a rom on my phone to kind of wipe it clean of T-Mobile and start fresh or what??
Please help me!!
Ok...I have done some digging on this site and I just wanna be clear. It looks like my phone wont work with the 3g network...and I'm ok with that...but my phone has NO internet at all and thats what I'm trying to fix.It also looks like I can fix my problem...just need a push in the right direction..please??
http://www.howardforums.com/showthread.php?t=1277773
If you flash a new ROM, they all come with a little program that runs in the begining to provision the phone with this info... Might be easier....
ok..thanks alot..i have the internet now.
one problem..those instructions don't help me with sending or recieving picture messages. I can't follow them to get me to where it fixes that for an htc touch pro 2...any ideas?
Are you looking in the registry at your arcsoft settings?
beeobee1 said:
I bought an unlocked HTC touch pro 2 that was with T-mobile.
I have AT&T. My phone works good for calls and text messaging but the data plan does not work.
I called AT&T and they cant help me.
I called HTC..can't help me.
They both said to call T-Mobile and ask them to reset the data options because my phone is trying to read off of the T-mobile options but what that amounts to is that they just don't know what they are talking about.
My friend said this site will have the answer!
Can anyone..please..point me in the right direction on how to set up my phone so I can use the data plan for AT&T or am I screwed??
I am new at this so I don't understand the lingo but..do I need to flash a rom on my phone to kind of wipe it clean of T-Mobile and start fresh or what??
Please help me!!
Click to expand...
Click to collapse
My understanding is that the T-Mobile phone has different hardware modem. It will not work with the AT & T 3G network. Sorry, there is no way I know of to fix this. The two carriers use different technology for 3G.
However, it should work with the EDGE network on AT&T. You will need tech support from AT&T - ask them what settings need to be entered in the connection manager to get the device to work with EDGE. Your phone has settings for "T-Mobile Data" in the Comm Manager. You need to delete that and enter the AT&T settings.
Also, VERY IMPORTANT, you need to go to the phone screen (where you dial calls), bring up the options, and set it to operate ONLY on 2G networks. Otherwise I think the T-Mobile 3G modem may interfere with your EDGE data.
BTW, have you asked T-Mobile about getting a Tilt 2? This is the same phone. You could resell your unlocked T-Mobile TP2 on ebay and recoup a lot of the costs. This would be the best option, since you could then get 3G coverage.
sphinx88 said:
If you flash a new ROM, they all come with a little program that runs in the begining to provision the phone with this info... Might be easier....
Click to expand...
Click to collapse
I would like to do this then...any suggestions on which rom i should use and how to do it..i appreciate all the help
all custom roms should have a provision cab or program. You will need to unlock your phone first. Look in the rom dev section
Bought an Epic 4G Touch and found a local guy on craigslist who's going to do a full flash to MetroPCS. I'm wondering if anybody has any suggestions as to what questions I should ask the guy. I'm new to this whole thing, this is my first smart phone, but I'm a quick learner.
From what I understand from my research, he's going to have to flash a custom rom on it in order for the phone's features to be fully operational. Is it important I find out which rom so I can perform my own updates, or is it going to be obvious what he did simply by looking in the settings?
Am I going to have to avoid OTA updates? Or do I just install Rootkeeper to get the updates?
I also assume that by doing this I will be stuck using the custom rom, right? Or as long as my ESN is added to the Metro system I can change it to any rom I can find that is fully operational with Metro?
Is there any other vital information I should make sure to ask for in case I need to configure anything in the future?
Would it be smarter for me to just ask him to add my ESN to metro and then flash it myself? (If I can find a guide online-- links, anybody?)
Feel free to add any information that you think might help!
Thanks in advance.
its pretty much about manually programming in your data settings 100% correctly. anyone can add an meid/esn into their database and program in your phone number(##SPC#). if you research online you can find the exact settings. i dont believe metro uses wap anymore so that certainly makes things easier.
you should be able to use ANY rom and be able to call/text/use data. the only issue you will run into(maybe.. i dont use metro) would be mms. mms sometimes is custom built for a specific phone/carrier. when you see metro/cricket custom roms.. thats generally the big modification.. the mms. you may get some little edits here and there.. changing the word sprint to metro etc... but otherwise thats pretty much it. as is.. the epic 4g touch can be manually programmed with any cdma carriers data profiles for 3g.
if you dont care about mms.. its a 100% no brainer.. take the time and do it yourself. if mms is a must.. do a little research to see if others on metro got mms working.. there will be people talking about it somewhere on the internet.
and just to add.. if u do use a custom rom for metro.. you will be stuck with that rom(unless its a freely available custom rom.. but those are rare these days.. most are sold on cdma forums for lots of $$$).
I will preface this with I've never done this before so I don't know the outcome. That said, at least in my area, the 4g is not compatible with lte, metro doesn't have 3g but 2g rttx1 should work. I don't know about you but if it were me, I wouldn't do it. That's like putting a restricting device on a Porsche so that its top speed is 30mph. 2g is practically dial up speeds. Do what you will though...
autoprime said:
its pretty much about manually programming in your data settings 100% correctly. anyone can add an meid/esn into their database and program in your phone number(##SPC#). if you research online you can find the exact settings. i dont believe metro uses wap anymore so that certainly makes things easier.
Click to expand...
Click to collapse
Thanks so much, great information. Question- Do you mean I can add my own ESN into the Metro Database myself? I thought only Metro reps could do that (independent ones for under the table).
As for the rest of the data settings, when searching for this information online, do I need to look specifically for Epic 4g Touch, or the data settings will be the same no matter what phone?
autoprime said:
if you dont care about mms.. its a 100% no brainer.. take the time and do it yourself. if mms is a must.. do a little research to see if others on metro got mms working.. there will be people talking about it somewhere on the internet.
Click to expand...
Click to collapse
Actually I don't care about mms, as long as I can do regular text messages (sms). Does this mean that if I don't care for MMS I can actually get the Epic Touch fully operational on the stock rom?
autoprime said:
and just to add.. if u do use a custom rom for metro.. you will be stuck with that rom(unless its a freely available custom rom.. but those are rare these days.. most are sold on cdma forums for lots of $$$).
Click to expand...
Click to collapse
So I couldn't re-flash it to a different rom? It's not "reversible"? (If it is possible- would I lose all the Metro data if I changed the rom?)
Thanks for the help, I've been Googling around like crazy trying to find more info, but not finding a lot. I probably should of gotten a more commonly metro flashed phone, lol. I'll keep looking around and see if I can find any guides, if I find one and can do everything myself I'd rather go that route (not to save money, just to be able to troubleshoot any issues that may arise in the future).
Edit: I've found this thread http://forum.xda-developers.com/showpost.php?p=8395950 that looks like it might be exactly what I need to do (up to step 28), and someone on this Epic Touch Forum recommended another member to this thread http://forum.xda-developers.com/showthread.php?t=1303507 but it's for Evo 3D, so not sure if it would work for the Epic. The guide starts off for phones already "flashed to metro with text and talk", though. I think I still need to pay the "Pro" to get my ESN added to the Metro Network? Are they able to add the ESN to the Metro Database and get text/talk working without flashing a custom rom?
Sorry... so many questions. I'll give lots of thanks =(
EDIT #2:
Think I got it now. Looks like I will need to get the phone Metro Flashed through my guy for talk and text (I can ask if his MMS/Web method involves a custom rom, if so I'll pass) then I can activate web (and MMS I guess) myself through these steps: http://forum.xda-developers.com/showthread.php?t=1303507
At this point (correct me if I'm wrong) I won't be locked into any custom roms and I can freely upgrade to any freely available rom (ie CM7) without affecting my Metro settings?
really not sure what the best procedure is for getting your esn added to the DB.. i would think any 3rd party metro store would be able to add it into system... as well as some people on craigslist. just look for the cheapest option.
once your esn ins in the system.. you pick a plan.. program in your phone number and msid (##SPC#) as well as write a metro PRL to the phone... and thats it for working talk/text. thats the "basic flash" most people do. only thing you cant do yourself is add meid.
and then you will eventually program data. the steps for evo 3d should be very similar to epic. other than how to get the phones into DIAG mode.. what to manually add is the same across the board... tho your username/password will be unique to you. (ppp password is based off esn.. username will be based on phonenumber).
i believe metro has recently added 3G in SOME areas.. so theres a small chance youll have that. and as for 4G... see my epic 4g touch thread on how to edit wimax settings...
ive said enough.. you should be able to take it from here.
edit: as for being "stuck" with a custom metro rom.. youd have the option to reflash anything youd like.. but the custom metro settings would probably no longer work. it would suck to pay for a custom rom that you end up wanted to switch out anyway(since it wouldnt be updated like he rest of the roms). i say pay the $10.. 15..20.. whatever it is to have esn added to the system.. then do the rest yourself.
If you search on ebay. There is a guy that can add your esn to metro for $25. Then you can flash your own custom rom, but you would have to setup your own data. If you search around, there are threads about how to setup data for metropcs around the web.
Ran outta thanks, I'll get you tomorrow
I looked it up on ebay and there's only a couple up atm and they end up being a lot, ie the cheapest is $20 but then they charge $25 shipping lol <.<
Luckily, the local guy I found on Craigslist (there are actually a lot independent metro stores in the area advertising actually) will add ESN and get talk & text working for $35. So it's not a bad deal. From there I'll get the rest working myself.
Although I'm gonna ask him about his MMS method, if it involves a custom rom I have been contemplating getting it. I been researching and it looks like all I have to do is backup the custom rom with nandroid, and I can flash to whatever rom I want, then I can always revert to the custom rom if I really want MMS working again-- if I'm unable to get it working myself.
My used Epic 4G Touch arrives in a few hours!
First thing I plan on doing is a full restore and then installing EL13+CWM. After this I'll get take it to the independent Metro store to get it flashed over to Metro. Then I'll make my first nandroid backup.
Question- By making the nandroid backup I can always revert back to the Metro data settings my guy configured, right? (In the case they get deleted through rom flashing).
Can I see all the settings he configured by reading the values set through CDMA Workshop? Would this include everything needed to make the phone fully functional on Metro again (outside of the possible custom rom to make MMS work)?
Thanks in advance.
Godswrath said:
My used Epic 4G Touch arrives in a few hours!
First thing I plan on doing is a full restore and then installing EL13+CWM. After this I'll get take it to the independent Metro store to get it flashed over to Metro. Then I'll make my first nandroid backup.
Question- By making the nandroid backup I can always revert back to the Metro data settings my guy configured, right? (In the case they get deleted through rom flashing).
Can I see all the settings he configured by reading the values set through CDMA Workshop? Would this include everything needed to make the phone fully functional on Metro again (outside of the possible custom rom to make MMS work)?
Thanks in advance.
Click to expand...
Click to collapse
nandroid wont restore data settings... but you wont need to as 3g data profiles(as well as talk/text) stick after new roms. only a ##786# full reset will wipe those settings.
you should be able to see most if not all settings with cdma ws/qpst service programming.
1. Phone number/msid has to be programmed.
2. Metro PRL Flashed
3. after step two you now have talk/text.
4. Program in 3G Profile 0/1.
5. Program PPP data profile.
6. Done. Only thing I skipped is MMS.. which will most likely be covered by a custom metro rom.. tho maybe you could take the mms ap out of the custom rom to use... but im just guessing at this point.
autoprime said:
really not sure what the best procedure is for getting your esn added to the DB.. i would think any 3rd party metro store would be able to add it into system... as well as some people on craigslist. just look for the cheapest option.
once your esn ins in the system.. you pick a plan.. program in your phone number and msid (##SPC#) as well as write a metro PRL to the phone... and thats it for working talk/text. thats the "basic flash" most people do. only thing you cant do yourself is add meid.
and then you will eventually program data. the steps for evo 3d should be very similar to epic. other than how to get the phones into DIAG mode.. what to manually add is the same across the board... tho your username/password will be unique to you. (ppp password is based off esn.. username will be based on phonenumber).
i believe metro has recently added 3G in SOME areas.. so theres a small chance youll have that. and as for 4G... see my epic 4g touch thread on how to edit wimax settings...
ive said enough.. you should be able to take it from here.
edit: as for being "stuck" with a custom metro rom.. youd have the option to reflash anything youd like.. but the custom metro settings would probably no longer work. it would suck to pay for a custom rom that you end up wanted to switch out anyway(since it wouldnt be updated like he rest of the roms). i say pay the $10.. 15..20.. whatever it is to have esn added to the system.. then do the rest yourself.
Click to expand...
Click to collapse
You can change your meid. ##YOURMSL#
Sent from my SPH-D710 using xda premium
locoboi187 said:
You can change your meid. ##YOURMSL#
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
yes it is possible to change an meid... but i'm not sure why ##MSL# is mentioned... the two are not related.
Hmmm... I'm stuck on this step :
USB Storage Mode is OFF - [Drag down the notification bar and tap on "USB Connected" - should be off by default]
When I click on USB Connected it just sends me back to Home. Any ideas?
(Step 1 from http://forum.xda-developers.com/showthread.php?t=1342728)
EDIT: figured it out, had to re-install drivers and change the default location to 32-bit
Nope, still no go... Hmm Maybe I'll uninstall drivers and reinstall them. Problem is my PC isn't recognizing phone as a drive, just a device.
Yeah I dunno, gonna give up installing EL13+CWM for now and go get it flashed.
I think the problem is, when I connect the device I get "Samsung Mobile MTP Device Failed"
I downloaded the Samsung USB/Android drivers [USB/Android] and have Kies installed (Kies can't even recognize it though).
autoprime said:
yes it is possible to change an meid... but i'm not sure why ##MSL# is mentioned... the two are not related.
Click to expand...
Click to collapse
Your MSL code entered at the dialer with the "#" brings up a menu in which you can edit. I used this with a sprint tech when trying to fix my gps
Sent from my SPH-D710 using xda premium
Godswrath said:
Hmmm... I'm stuck on this step :
USB Storage Mode is OFF - [Drag down the notification bar and tap on "USB Connected" - should be off by default]
When I click on USB Connected it just sends me back to Home. Any ideas?
(Step 1 from http://forum.xda-developers.com/showthread.php?t=1342728)
EDIT: figured it out, had to re-install drivers and change the default location to 32-bit
Nope, still no go... Hmm Maybe I'll uninstall drivers and reinstall them. Problem is my PC isn't recognizing phone as a drive, just a device.
Yeah I dunno, gonna give up installing EL13+CWM for now and go get it flashed.
I think the problem is, when I connect the device I get "Samsung Mobile MTP Device Failed"
I downloaded the Samsung USB/Android drivers [USB/Android] and have Kies installed (Kies can't even recognize it though).
Click to expand...
Click to collapse
Maybe you need USB debugging enabled by going to Settings > Applications > Development
Sent from my SPH-D710 using xda premium
Thanks, but no go. Have debugging checked. (I followed the tutorials to the letter)
youre trying to root?
I successfully rooted with the full restore, what I tried to do next was install EL13+CWM and I noticed 2 things:
1st) I can't get past this step: USB Storage Mode is OFF - [Drag down the notification bar and tap on "USB Connected" - should be off by default - pic] (ie when I tap on "USB Connected" it just takes me back to the home screen.
2nd) I continued with the tutorial since it says it should be set correctly as default, but then when the E4GT automated rooting package (not to root, but to install EL13+CWM) it hangs saying "Waiting for device to be connected"
When looking for an answer I discovered this:Why is the install stuck waiting for device to be connected? which gave me some ideas to try, although I've tried all of them to no avail.
I should note that when I go to start->run->devmgmt.msc this:
Code:
Android Phone
SAMSUNG Android ADB Interface
Modem
SAMSUNG Mobile USB Modem
isn't listed there, like it says it should here.
I think I'm going to try to reinstall all the drivers again... Should I do this before or after connected the phone? (The first time I installed the USB/Android drivers from the tutorial before connecting my phone, but I notice after connecting the phone windows goes through the automated process of installing drivers)
<face palm>
http://androidadvices.com/enable-usb-storage-android-devices/
It was so simple, lol... To my own defense this wasn't anywhere in the tutorials
Thanks again for the help guys
EDIT: Well, looks like my problem is still here, the E4GT automated rooting package still hangs searching for device to be connected.
EDIT #2: Omg... Finally figured it out. I thought debugging was enabled (it shows a freakin' check mark) but it has to be a green check mark apparently...
Weee installed CWM, now to create a nandroid and start flashing! Think I'm going for Calkulin's rom with the ICS Theme
Another question!
Hey guys, question:
I got 2 E4GT's flashed over to MetroPCS, both are working fine, but one of them gives me this error on bootup:
Code:
Error 67: Registration failure. Your Sprint data service username
and/or password may be incorrect. Please try again.
Any ideas? Aside from the nuisance, it hasn't seemed to cause any hindrance to the features. The other phone has never given this error, though. Both are running on Calk's rom. Thx guys.
Godswrath said:
Hey guys, question:
I got 2 E4GT's flashed over to MetroPCS, both are working fine, but one of them gives me this error on bootup:
Code:
Error 67: Registration failure. Your Sprint data service username
and/or password may be incorrect. Please try again.
Any ideas? Aside from the nuisance, it hasn't seemed to cause any hindrance to the features. The other phone has never given this error, though. Both are running on Calk's rom. Thx guys.
Click to expand...
Click to collapse
if its only at bootup i wouldnt worry too much. its just the firmware trying to get a sprint connection and it failing.. since youre connected to metro. i would check ##data# > view > data profile/username.. compare whats listed for the one thats working to the one thats giving the error. are they both the same? if not, make them the same and perhaps you can avoid the error. if they are the same... its probably some little data setting somewhere that the phone doesnt like and likely not worth the hassle of poking at it more. like i first said.. the error at boot really isnt a huge deal. if it was a constant error that kept popping up then its something to look at.
I have been at this for several days now. i have a sprint evo 4g that i am "flashing" to virgin mobile.
i havnt got talk and txt going yet, i get the error 16, buit i dont get the error 16 on the doner phone.
how do i fix this,
i have double, triple, checked the settings (this is the frist time i have done this so i am no professional).
i have looked and read everything i can find. i have read that you need to call sprint customer service. i wasnt sure if that is true (because the doner phone dosnt get the error)
i have not done the data part yet (AAA) just because i havent got talk and txt working yet.
any help would be trully appreciated!
thanks
Have you flashed the virgin mobile firmware for it? Do you have the appropriate radios and prl flashed onto the phone? You will need to activate your virgin mobile esn number by calling them if you have everthing else flashed to work with your phone. However I and others are not allowed to give you step by step instructions because doing the esn thing is illegal and xda is a law abiding organization. I hope some of this information has shed some light to your predicement. You will have to search google for the rest.
Jsparta26 said:
Have you flashed the virgin mobile firmware for it? Do you have the appropriate radios and prl flashed onto the phone? You will need to activate your virgin mobile esn number by calling them if you have everthing else flashed to work with your phone. However I and others are not allowed to give you step by step instructions because doing the esn thing is illegal and xda is a law abiding organization. I hope some of this information has shed some light to your predicement. You will have to search google for the rest.
Click to expand...
Click to collapse
i followed this http://forum.xda-developers.com/showthread.php?t=1620377
not sure about what firmware to use, i found the vm prl and put that on. i cannot find vm radios. i have the vm activated.
i dont want to ask anything im not supposed to, i have searched for days. if someone would even pm me with some help i will make it worth your time.
thanks
noonevac said:
I have been at this for several days now. i have a sprint evo 4g that i am "flashing" to virgin mobile.
i havnt got talk and txt going yet, i get the error 16, buit i dont get the error 16 on the doner phone.
how do i fix this,
i have double, triple, checked the settings (this is the frist time i have done this so i am no professional).
i have looked and read everything i can find. i have read that you need to call sprint customer service. i wasnt sure if that is true (because the doner phone dosnt get the error)
i have not done the data part yet (AAA) just because i havent got talk and txt working yet.
any help would be trully appreciated!
thanks
Click to expand...
Click to collapse
Number one, you have to finish the flashing completely. Follow all the steps until your done.
After all of you info has taken into the evo, (esn, meid, etc) then you can move forward.
The error code 16 is a security feature from Sprint. Its telling them you tried activation of a phone that "may" not be correct.
When your completely done, make your first call and it should route to the error message. Stay on the line, it will be answered by a Sprint rep.
They will ask questions about your phone model, etc. OBVIOUSLY they need to know about your donor
It will take about 3 minutes, then your all set.
Sent from my PC36100 using Tapatalk 2
Someone that can Help with Ha & AAA Keys. I have Read & Read & Tried Several Different Ways about & failed Time & Time Again. I Have NV Files, & software. Please PM Me if You Would Like to help.
Giterdun said:
Someone that can Help with Ha & AAA Keys. I have Read & Read & Tried Several Different Ways about & failed Time & Time Again. I Have NV Files, & software. Please PM Me if You Would Like to help.
Click to expand...
Click to collapse
I found somethings on it,not sure if it will help you or not....
http://forum.xda-developers.com/showthread.php?t=1601869
http://forum.ppcgeeks.com/2019456-post17.html
ha aaa
Diablo67 said:
I found somethings on it,not sure if it will help you or not....
http://forum.xda-developers.com/showthread.php?t=1601869
http://forum.ppcgeeks.com/2019456-post17.html
Click to expand...
Click to collapse
Yes I have Read Those several Times. But its a No Go. (Samsung Replenish & Htc Evo ) Are The Phones Im Working With.
I Have All The NV Files But When I enter them Into The Phone It Does Not Work.
I Had The Phone On With A HTC Touch Pro 1 but just activated it before I knew about getting the ha aaa first. So I only Had 1X. But When I Turn the Pro Back On I Couldnt get the Evo To Work Again. So I Switched To the Samsung But it never has Activated the Evo Since.
Im Wordering if I should Go back to stock RUU Then Put in all The Ha aaa's The Try The OTA Again.
Giterdun said:
Yes I have Read Those several Times. But its a No Go. (Samsung Replenish & Htc Evo ) Are The Phones Im Working With.
I Have All The NV Files But When I enter them Into The Phone It Does Not Work.
I Had The Phone On With A HTC Touch Pro 1 but just activated it before I knew about getting the ha aaa first. So I only Had 1X. But When I Turn the Pro Back On I Couldnt get the Evo To Work Again. So I Switched To the Samsung But it never has Activated the Evo Since.
Im Wordering if I should Go back to stock RUU Then Put in all The Ha aaa's The Try The OTA Again.
Click to expand...
Click to collapse
I know this thread is months old, but did you figure this out or do you still need help with this?
some service from Ha AAA 466 1192
budgreen24 said:
I know this thread is months old, but did you figure this out or do you still need help with this?
Click to expand...
Click to collapse
Well I Did manage to get my evo working, it still has some bugs... For some reason the phone goes to a sleep mode or something and when someone calls me it goes straight to voice mail, also I don't receive my text messages sometimes for 20 to 30 mins or hours after someone sends them. i can make a call & Then it seems to work right. I have had a few times where when I tried calling out it didn't seem to work either, I think it would go to there voice mail or say this call could not be completed or something. ( It doesn't do that very often)..
It Seems Like It has this problem of losing the network after I switch towers from one town to another or when I plug it in to a computer or charger but not for sure.
My internet seems to work always weather 3G or wifi though 3G sometimes is really slow untill I reboot my phone & seems to pick up for a while.
Thanks
Giterdun
Giterdun said:
Well I Did manage to get my evo working, it still has some bugs... For some reason the phone goes to a sleep mode or something and when someone calls me it goes straight to voice mail, also I don't receive my text messages sometimes for 20 to 30 mins or hours after someone sends them. i can make a call & Then it seems to work right. I have had a few times where when I tried calling out it didn't seem to work either, I think it would go to there voice mail or say this call could not be completed or something. ( It doesn't do that very often)..
It Seems Like It has this problem of losing the network after I switch towers from one town to another or when I plug it in to a computer or charger but not for sure.
My internet seems to work always weather 3G or wifi though 3G sometimes is really slow untill I reboot my phone & seems to pick up for a while.
Thanks
Giterdun
Click to expand...
Click to collapse
Sounds like you might need to update your PRL. (either automatically or manually). Have you done that yet? You should update your data profile also while you're at it.
pm me if you need more
budgreen24 said:
Sounds like you might need to update your PRL. (either automatically or manually). Have you done that yet? You should update your data profile also while you're at it.
pm me if you need more
Click to expand...
Click to collapse
I having a similar problem with my phone, my phone does show 3g icon however I m only getting 130kbps. I been reading all over the internet until I found this post that shows that AAA key is phone specific and if not configure phone get stuck on 1x. I think that I might have changed this value by mistake, not sure, question is where can I find out the correct value for my Evo? Phone is flashed to carrrier in Dominican Republic, voice works fine. Carrier will not provide much help. Also if any one can advice of correct data configuration for this phone, what type of credentials I need, just to double check data configuration, as I stated carrier customer service will not provide much help. I am using DFS tool to update PRL, etc. Really appreciate any help on this!!!!
ChinoRD said:
I having a similar problem with my phone, my phone does show 3g icon however I m only getting 130kbps. I been reading all over the internet until I found this post that shows that AAA key is phone specific and if not configure phone get stuck on 1x. I think that I might have changed this value by mistake, not sure, question is where can I find out the correct value for my Evo? Phone is flashed to carrrier in Dominican Republic, voice works fine. Carrier will not provide much help. Also if any one can advice of correct data configuration for this phone, what type of credentials I need, just to double check data configuration, as I stated carrier customer service will not provide much help. I am using DFS tool to update PRL, etc. Really appreciate any help on this!!!!
Click to expand...
Click to collapse
Well one solution would be to swap handsets on your account with your carrier to a phone that you'll be able to read all the required info from. Then read and save. Then write the correct info onto your Evo and switch handsets back. The downside to this is it requires you to have another phone... But it will work.