Related
I have the Tmobile dash and want to run AT&T on it without having all the junky tmobile software (ESPECIALLY THE STARTUP ANIMATION). Is there a Rom that could be used to have software with AT&T stuff on it?
Just wanted to ask. Friend wants this phone but with AT&T stuff on it.
Flandrel
Flandrel said:
I have the Tmobile dash and want to run AT&T on it without having all the junky tmobile software (ESPECIALLY THE STARTUP ANIMATION). Is there a Rom that could be used to have software with AT&T stuff on it?
Just wanted to ask. Friend wants this phone but with AT&T stuff on it.
Flandrel
Click to expand...
Click to collapse
None that I know of. All of the ROMs besides T-Mo officials are gonna display either Rogers or HTC screens. Nothing with AT&T since AT&T doesn't carry the Excalibur.
HTC screen would work. just so long as not tmobile. will have to see what is a good rom to use that does not have the myfaves junk or the other stuff. any good recommendations on roms that work good for it?
Thanks for the help.
Flandrel
Try out Ricky's v23 ROM. It has a lot of programs on it, but they're *useful*. Also, it's Windows Mobile 6.1, which is hot hot hot.
Flandrel said:
HTC screen would work. just so long as not tmobile. will have to see what is a good rom to use that does not have the myfaves junk or the other stuff. any good recommendations on roms that work good for it?
Thanks for the help.
Flandrel
Click to expand...
Click to collapse
There's also some steps you can also perform to add custom startup splash screens, Now granted it will still show either the tmobile or htc first screen (depending on the rom you have) and then the windows mobile screen after that , but the 3rd screen, where applicable can be changed to whatever 320 X240 .gif image and the startup and shutdown sounds can also be changed too. So in other words, although you will have the HTC screen if you chooses kavana's or rick's ROM you can still create a custom At&t ( or find one) .gif image to be displayed at startup. Here's the link for instructions for that.
http://forum.xda-developers.com/showpost.php?p=1966277&postcount=322
both replies were extremely helpful. thank you. the phone is sim unlocked but not CID unlocked. need to get what I need to do that and get started. also want to do the same thing for my tmobile wing also and get a good rom for it and get it setup also.
Flandrel
Dont need to CID unlock
Flandrel said:
both replies were extremely helpful. thank you. the phone is sim unlocked but not CID unlocked. need to get what I need to do that and get started. also want to do the same thing for my tmobile wing also and get a good rom for it and get it setup also.
Flandrel
Click to expand...
Click to collapse
Read the stickys on upgrading. Jocky made a bypass for offical ROMs and 6.1 doesnt even need it
Got this all setup for my Tmobile Wing. Whohoo. Now looking at the Dash on trying to setup the AT&T settings for Internet and MMS, etc.
Any clues? Easy to do on Wing with touchscreen and more options to choose from.
I have it updated with the HTC 1.33.422.1 (Worldwide English, WM6) ROM. (Didn't want the Tmobile one)
Thanks,
Flandrel
Flandrel said:
Got this all setup for my Tmobile Wing. Whohoo. Now looking at the Dash on trying to setup the AT&T settings for Internet and MMS, etc.
Any clues? Easy to do on Wing with touchscreen and more options to choose from.
I have it updated with the HTC 1.33.422.1 (Worldwide English, WM6) ROM. (Didn't want the Tmobile one)
Thanks,
Flandrel
Click to expand...
Click to collapse
Have you tried the AT&T website? T-Mobile's site has the settings for MMS and Internet, so AT&T's may have the same.
They're also posted in the wiki. I've been looking for someone to test them out to see if they actually work with AT&T.
beartard said:
They're also posted in the wiki. I've been looking for someone to test them out to see if they actually work with AT&T.
Click to expand...
Click to collapse
Found the settings in the wiki. Gonna try them out and will let you know.
UPDATE: This is with Factory Tmobile WM6 ROM.
Going by these settings:
# MMSC settings for MMS:
#
Start > Messaging > Scroll to MMS > Menu > Settings > MMSC Settings
* Name is AT&T MMS
* MMSC is http://mmsc.cingular.com
* Data connection is The Internet
* Gateway is WAP 2.0 Gateway
* IP Address is 66.209.11.32
* Port is 80
* Encoding is Binary (DO NOT SEE THIS OPTION ANYWHERE)
* Click "done"
#
Then in Send Options
* Priority is normal
* Validity period is maximum (DO NOT SEE THIS AREA AT ALL)
* Deffered Delivery is immediate (DO NOT SEE THIS AREA AT ALL)
* Click "done"
#
Then in Receive Options (DO NOT SEE THIS AREA AT ALL)
* Home and roaming reception is automatic
* Allowed message types: informational, advertisement, auto
These settings from the Wiki are for the "From AT&T's settings support page for the Motorola Q Global"
Unless the MotoQ has alternate settings you can choose.
I even did not see alot of those settings using the HTC ROM for the Excalibur either.
Flandrel
Tmobile Owns At&t
WHY in the world would you want to switch from Tmobile to AT&T????!?!?!!!!: Well i guess some people.....
UMM I Am not sure why anybody would ever make something like that!!!!!
Tmobiledashluva said:
WHY in the world would you want to switch from Tmobile to AT&T????!?!?!!!!: Well i guess some people.....
UMM I Am not sure why anybody would ever make something like that!!!!!
Click to expand...
Click to collapse
Well if you live in LA Tmobile cell service is not the greatest great service for texting though. that's why I use AT&T. They were alot better when they were Cingular. AT&T are very arrogant, JMO.
Tmobiledashluva said:
WHY in the world would you want to switch from Tmobile to AT&T????!?!?!!!!: Well i guess some people.....
UMM I Am not sure why anybody would ever make something like that!!!!!
Click to expand...
Click to collapse
1. Tmobile in my area SUCKS!! Always has, always will. Customer service was rotten to the core. Even the local representatives were arrogant and not very helpful.
2. Tmobile told me before when I kept losing signal or had no signal that it was my phone. I unlocked it and kept Tmobile SIM card in and still had issues. Tried AT&T SIM card in it and got full complete signal. Tmobile didn't know what they were talking about.
3. AT&T has always been good to me. Not to mention I get a corporate discount of 25% off my bill and accessories. None of this with Tmobile.
4. Tmobile never, never would give any type of deal on phones. Had to beg and plead and they still wouldn't. With AT&T I got 4 phones (2 samsung, LG, and my Tilt) totaling $1500 for $50 after rebates, etc. Could not pass this deal up.
5. Tmobile been promising for last year and half for 3G. Still don't have it up and if they do it is just in the beginning stages. That was a condition I had when I signed up. Talked to local rep and even called customer service when I signed up in May 2007. They told me by end of 2007 that 3G would be available. It is just now getting there if even that.
6. But I would still like to be able to use my Wing as a backup in case. So still trying settings out to get it to work, even though it will never have 3G on it.
Flandrel
Bought an Epic 4G Touch and found a local guy on craigslist who's going to do a full flash to MetroPCS. I'm wondering if anybody has any suggestions as to what questions I should ask the guy. I'm new to this whole thing, this is my first smart phone, but I'm a quick learner.
From what I understand from my research, he's going to have to flash a custom rom on it in order for the phone's features to be fully operational. Is it important I find out which rom so I can perform my own updates, or is it going to be obvious what he did simply by looking in the settings?
Am I going to have to avoid OTA updates? Or do I just install Rootkeeper to get the updates?
I also assume that by doing this I will be stuck using the custom rom, right? Or as long as my ESN is added to the Metro system I can change it to any rom I can find that is fully operational with Metro?
Is there any other vital information I should make sure to ask for in case I need to configure anything in the future?
Would it be smarter for me to just ask him to add my ESN to metro and then flash it myself? (If I can find a guide online-- links, anybody?)
Feel free to add any information that you think might help!
Thanks in advance.
its pretty much about manually programming in your data settings 100% correctly. anyone can add an meid/esn into their database and program in your phone number(##SPC#). if you research online you can find the exact settings. i dont believe metro uses wap anymore so that certainly makes things easier.
you should be able to use ANY rom and be able to call/text/use data. the only issue you will run into(maybe.. i dont use metro) would be mms. mms sometimes is custom built for a specific phone/carrier. when you see metro/cricket custom roms.. thats generally the big modification.. the mms. you may get some little edits here and there.. changing the word sprint to metro etc... but otherwise thats pretty much it. as is.. the epic 4g touch can be manually programmed with any cdma carriers data profiles for 3g.
if you dont care about mms.. its a 100% no brainer.. take the time and do it yourself. if mms is a must.. do a little research to see if others on metro got mms working.. there will be people talking about it somewhere on the internet.
and just to add.. if u do use a custom rom for metro.. you will be stuck with that rom(unless its a freely available custom rom.. but those are rare these days.. most are sold on cdma forums for lots of $$$).
I will preface this with I've never done this before so I don't know the outcome. That said, at least in my area, the 4g is not compatible with lte, metro doesn't have 3g but 2g rttx1 should work. I don't know about you but if it were me, I wouldn't do it. That's like putting a restricting device on a Porsche so that its top speed is 30mph. 2g is practically dial up speeds. Do what you will though...
autoprime said:
its pretty much about manually programming in your data settings 100% correctly. anyone can add an meid/esn into their database and program in your phone number(##SPC#). if you research online you can find the exact settings. i dont believe metro uses wap anymore so that certainly makes things easier.
Click to expand...
Click to collapse
Thanks so much, great information. Question- Do you mean I can add my own ESN into the Metro Database myself? I thought only Metro reps could do that (independent ones for under the table).
As for the rest of the data settings, when searching for this information online, do I need to look specifically for Epic 4g Touch, or the data settings will be the same no matter what phone?
autoprime said:
if you dont care about mms.. its a 100% no brainer.. take the time and do it yourself. if mms is a must.. do a little research to see if others on metro got mms working.. there will be people talking about it somewhere on the internet.
Click to expand...
Click to collapse
Actually I don't care about mms, as long as I can do regular text messages (sms). Does this mean that if I don't care for MMS I can actually get the Epic Touch fully operational on the stock rom?
autoprime said:
and just to add.. if u do use a custom rom for metro.. you will be stuck with that rom(unless its a freely available custom rom.. but those are rare these days.. most are sold on cdma forums for lots of $$$).
Click to expand...
Click to collapse
So I couldn't re-flash it to a different rom? It's not "reversible"? (If it is possible- would I lose all the Metro data if I changed the rom?)
Thanks for the help, I've been Googling around like crazy trying to find more info, but not finding a lot. I probably should of gotten a more commonly metro flashed phone, lol. I'll keep looking around and see if I can find any guides, if I find one and can do everything myself I'd rather go that route (not to save money, just to be able to troubleshoot any issues that may arise in the future).
Edit: I've found this thread http://forum.xda-developers.com/showpost.php?p=8395950 that looks like it might be exactly what I need to do (up to step 28), and someone on this Epic Touch Forum recommended another member to this thread http://forum.xda-developers.com/showthread.php?t=1303507 but it's for Evo 3D, so not sure if it would work for the Epic. The guide starts off for phones already "flashed to metro with text and talk", though. I think I still need to pay the "Pro" to get my ESN added to the Metro Network? Are they able to add the ESN to the Metro Database and get text/talk working without flashing a custom rom?
Sorry... so many questions. I'll give lots of thanks =(
EDIT #2:
Think I got it now. Looks like I will need to get the phone Metro Flashed through my guy for talk and text (I can ask if his MMS/Web method involves a custom rom, if so I'll pass) then I can activate web (and MMS I guess) myself through these steps: http://forum.xda-developers.com/showthread.php?t=1303507
At this point (correct me if I'm wrong) I won't be locked into any custom roms and I can freely upgrade to any freely available rom (ie CM7) without affecting my Metro settings?
really not sure what the best procedure is for getting your esn added to the DB.. i would think any 3rd party metro store would be able to add it into system... as well as some people on craigslist. just look for the cheapest option.
once your esn ins in the system.. you pick a plan.. program in your phone number and msid (##SPC#) as well as write a metro PRL to the phone... and thats it for working talk/text. thats the "basic flash" most people do. only thing you cant do yourself is add meid.
and then you will eventually program data. the steps for evo 3d should be very similar to epic. other than how to get the phones into DIAG mode.. what to manually add is the same across the board... tho your username/password will be unique to you. (ppp password is based off esn.. username will be based on phonenumber).
i believe metro has recently added 3G in SOME areas.. so theres a small chance youll have that. and as for 4G... see my epic 4g touch thread on how to edit wimax settings...
ive said enough.. you should be able to take it from here.
edit: as for being "stuck" with a custom metro rom.. youd have the option to reflash anything youd like.. but the custom metro settings would probably no longer work. it would suck to pay for a custom rom that you end up wanted to switch out anyway(since it wouldnt be updated like he rest of the roms). i say pay the $10.. 15..20.. whatever it is to have esn added to the system.. then do the rest yourself.
If you search on ebay. There is a guy that can add your esn to metro for $25. Then you can flash your own custom rom, but you would have to setup your own data. If you search around, there are threads about how to setup data for metropcs around the web.
Ran outta thanks, I'll get you tomorrow
I looked it up on ebay and there's only a couple up atm and they end up being a lot, ie the cheapest is $20 but then they charge $25 shipping lol <.<
Luckily, the local guy I found on Craigslist (there are actually a lot independent metro stores in the area advertising actually) will add ESN and get talk & text working for $35. So it's not a bad deal. From there I'll get the rest working myself.
Although I'm gonna ask him about his MMS method, if it involves a custom rom I have been contemplating getting it. I been researching and it looks like all I have to do is backup the custom rom with nandroid, and I can flash to whatever rom I want, then I can always revert to the custom rom if I really want MMS working again-- if I'm unable to get it working myself.
My used Epic 4G Touch arrives in a few hours!
First thing I plan on doing is a full restore and then installing EL13+CWM. After this I'll get take it to the independent Metro store to get it flashed over to Metro. Then I'll make my first nandroid backup.
Question- By making the nandroid backup I can always revert back to the Metro data settings my guy configured, right? (In the case they get deleted through rom flashing).
Can I see all the settings he configured by reading the values set through CDMA Workshop? Would this include everything needed to make the phone fully functional on Metro again (outside of the possible custom rom to make MMS work)?
Thanks in advance.
Godswrath said:
My used Epic 4G Touch arrives in a few hours!
First thing I plan on doing is a full restore and then installing EL13+CWM. After this I'll get take it to the independent Metro store to get it flashed over to Metro. Then I'll make my first nandroid backup.
Question- By making the nandroid backup I can always revert back to the Metro data settings my guy configured, right? (In the case they get deleted through rom flashing).
Can I see all the settings he configured by reading the values set through CDMA Workshop? Would this include everything needed to make the phone fully functional on Metro again (outside of the possible custom rom to make MMS work)?
Thanks in advance.
Click to expand...
Click to collapse
nandroid wont restore data settings... but you wont need to as 3g data profiles(as well as talk/text) stick after new roms. only a ##786# full reset will wipe those settings.
you should be able to see most if not all settings with cdma ws/qpst service programming.
1. Phone number/msid has to be programmed.
2. Metro PRL Flashed
3. after step two you now have talk/text.
4. Program in 3G Profile 0/1.
5. Program PPP data profile.
6. Done. Only thing I skipped is MMS.. which will most likely be covered by a custom metro rom.. tho maybe you could take the mms ap out of the custom rom to use... but im just guessing at this point.
autoprime said:
really not sure what the best procedure is for getting your esn added to the DB.. i would think any 3rd party metro store would be able to add it into system... as well as some people on craigslist. just look for the cheapest option.
once your esn ins in the system.. you pick a plan.. program in your phone number and msid (##SPC#) as well as write a metro PRL to the phone... and thats it for working talk/text. thats the "basic flash" most people do. only thing you cant do yourself is add meid.
and then you will eventually program data. the steps for evo 3d should be very similar to epic. other than how to get the phones into DIAG mode.. what to manually add is the same across the board... tho your username/password will be unique to you. (ppp password is based off esn.. username will be based on phonenumber).
i believe metro has recently added 3G in SOME areas.. so theres a small chance youll have that. and as for 4G... see my epic 4g touch thread on how to edit wimax settings...
ive said enough.. you should be able to take it from here.
edit: as for being "stuck" with a custom metro rom.. youd have the option to reflash anything youd like.. but the custom metro settings would probably no longer work. it would suck to pay for a custom rom that you end up wanted to switch out anyway(since it wouldnt be updated like he rest of the roms). i say pay the $10.. 15..20.. whatever it is to have esn added to the system.. then do the rest yourself.
Click to expand...
Click to collapse
You can change your meid. ##YOURMSL#
Sent from my SPH-D710 using xda premium
locoboi187 said:
You can change your meid. ##YOURMSL#
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
yes it is possible to change an meid... but i'm not sure why ##MSL# is mentioned... the two are not related.
Hmmm... I'm stuck on this step :
USB Storage Mode is OFF - [Drag down the notification bar and tap on "USB Connected" - should be off by default]
When I click on USB Connected it just sends me back to Home. Any ideas?
(Step 1 from http://forum.xda-developers.com/showthread.php?t=1342728)
EDIT: figured it out, had to re-install drivers and change the default location to 32-bit
Nope, still no go... Hmm Maybe I'll uninstall drivers and reinstall them. Problem is my PC isn't recognizing phone as a drive, just a device.
Yeah I dunno, gonna give up installing EL13+CWM for now and go get it flashed.
I think the problem is, when I connect the device I get "Samsung Mobile MTP Device Failed"
I downloaded the Samsung USB/Android drivers [USB/Android] and have Kies installed (Kies can't even recognize it though).
autoprime said:
yes it is possible to change an meid... but i'm not sure why ##MSL# is mentioned... the two are not related.
Click to expand...
Click to collapse
Your MSL code entered at the dialer with the "#" brings up a menu in which you can edit. I used this with a sprint tech when trying to fix my gps
Sent from my SPH-D710 using xda premium
Godswrath said:
Hmmm... I'm stuck on this step :
USB Storage Mode is OFF - [Drag down the notification bar and tap on "USB Connected" - should be off by default]
When I click on USB Connected it just sends me back to Home. Any ideas?
(Step 1 from http://forum.xda-developers.com/showthread.php?t=1342728)
EDIT: figured it out, had to re-install drivers and change the default location to 32-bit
Nope, still no go... Hmm Maybe I'll uninstall drivers and reinstall them. Problem is my PC isn't recognizing phone as a drive, just a device.
Yeah I dunno, gonna give up installing EL13+CWM for now and go get it flashed.
I think the problem is, when I connect the device I get "Samsung Mobile MTP Device Failed"
I downloaded the Samsung USB/Android drivers [USB/Android] and have Kies installed (Kies can't even recognize it though).
Click to expand...
Click to collapse
Maybe you need USB debugging enabled by going to Settings > Applications > Development
Sent from my SPH-D710 using xda premium
Thanks, but no go. Have debugging checked. (I followed the tutorials to the letter)
youre trying to root?
I successfully rooted with the full restore, what I tried to do next was install EL13+CWM and I noticed 2 things:
1st) I can't get past this step: USB Storage Mode is OFF - [Drag down the notification bar and tap on "USB Connected" - should be off by default - pic] (ie when I tap on "USB Connected" it just takes me back to the home screen.
2nd) I continued with the tutorial since it says it should be set correctly as default, but then when the E4GT automated rooting package (not to root, but to install EL13+CWM) it hangs saying "Waiting for device to be connected"
When looking for an answer I discovered this:Why is the install stuck waiting for device to be connected? which gave me some ideas to try, although I've tried all of them to no avail.
I should note that when I go to start->run->devmgmt.msc this:
Code:
Android Phone
SAMSUNG Android ADB Interface
Modem
SAMSUNG Mobile USB Modem
isn't listed there, like it says it should here.
I think I'm going to try to reinstall all the drivers again... Should I do this before or after connected the phone? (The first time I installed the USB/Android drivers from the tutorial before connecting my phone, but I notice after connecting the phone windows goes through the automated process of installing drivers)
<face palm>
http://androidadvices.com/enable-usb-storage-android-devices/
It was so simple, lol... To my own defense this wasn't anywhere in the tutorials
Thanks again for the help guys
EDIT: Well, looks like my problem is still here, the E4GT automated rooting package still hangs searching for device to be connected.
EDIT #2: Omg... Finally figured it out. I thought debugging was enabled (it shows a freakin' check mark) but it has to be a green check mark apparently...
Weee installed CWM, now to create a nandroid and start flashing! Think I'm going for Calkulin's rom with the ICS Theme
Another question!
Hey guys, question:
I got 2 E4GT's flashed over to MetroPCS, both are working fine, but one of them gives me this error on bootup:
Code:
Error 67: Registration failure. Your Sprint data service username
and/or password may be incorrect. Please try again.
Any ideas? Aside from the nuisance, it hasn't seemed to cause any hindrance to the features. The other phone has never given this error, though. Both are running on Calk's rom. Thx guys.
Godswrath said:
Hey guys, question:
I got 2 E4GT's flashed over to MetroPCS, both are working fine, but one of them gives me this error on bootup:
Code:
Error 67: Registration failure. Your Sprint data service username
and/or password may be incorrect. Please try again.
Any ideas? Aside from the nuisance, it hasn't seemed to cause any hindrance to the features. The other phone has never given this error, though. Both are running on Calk's rom. Thx guys.
Click to expand...
Click to collapse
if its only at bootup i wouldnt worry too much. its just the firmware trying to get a sprint connection and it failing.. since youre connected to metro. i would check ##data# > view > data profile/username.. compare whats listed for the one thats working to the one thats giving the error. are they both the same? if not, make them the same and perhaps you can avoid the error. if they are the same... its probably some little data setting somewhere that the phone doesnt like and likely not worth the hassle of poking at it more. like i first said.. the error at boot really isnt a huge deal. if it was a constant error that kept popping up then its something to look at.
Hi all,
Thanks for a least looking at this thread and providing feedback. So here is my situation.
1. Bought EVO 4g from a friend who bought new phone and transferred his phone number from Sprint to Verizon so the phone does not have access to Sprint's network.
2. My wife has a crappy MetroPCS phone I would like to replace with the EVO 4g.
3. I have all the software that has been talked about in many threads here: diagnosis drivers, cdma workshop, prl, and a few other things which I can't remember.
4. I have rooted the phone with S-OFF and currently running MetrogenMod 4.5
Q1: Does the phone need to be on the Sprint network in order for me to get the phone working on MetroPCS?
Q2: After reading all of the forums it sounds like the phone will magically work on MetroPCS' network, but something tells me I'm missing something?
Q3: How do I get my wife's phone number transferred over to this phone? It seems I can only transfer the current phone number that the phone has even though it is not mine.
Thanks again in advance and I apologize if these questions have been asked before, but I did not see any.
Jamdev12
PS: Ok after reading and getting familiar with this stuff it seems there are two ways of doing this, but I rather get some expertise from someone first :
1. Easiest method. Call MetroPCS and request an ESN swap. Since I own both phones I don't foresee this as illegal and I've heard of people successfully getting this done.
2. Hardest method and possibly bricking the phone. Call Sprint and request MLS number. Then use the software that is available to get ESN from old phone and write it to the new phone. If done right, the new phone will act and connect as if it were the old phone.
To all, am I correct in the above assumptions?
You shouldn't need to call sprint for your msl..search the play store for "msl reader". It'll save you that hassle anyways. ....Did a quick search and found this guide over on af.. http://androidforums.com/evo-4g-all-things-root/538899-guide-metro-pcs-donor-flash.html .. I flashed to boost so thats the extent of my experience. Hope it helps.
Hi nrvlljr,
Thanks for this link. I will be trying this tonight and if I get it working, I'll post my findings. Wish me luck. :good:
jamdev12
jamdev12 said:
Hi nrvlljr,
Thanks for this link. I will be trying this tonight and if I get it working, I'll post my findings. Wish me luck. :good:
jamdev12
Click to expand...
Click to collapse
Break a leg buddy..Just make sure to follow the instructions to a tee and you'll be fine.
nrvlljr said:
Break a leg buddy..Just make sure to follow the instructions to a tee and you'll be fine.
Click to expand...
Click to collapse
Hi nrvlljr,
Thanks for the encouragement. Unfortunately it did not work for me. For some reason the phone is unable to log into the MetroPCS network as my old phone. One thing that confused me about the instructions was to save the nam1 and Nam2 data for my old phone because not once after that did I use this data to reprogram the new phone. All it says is to replace the ESN and meid numbers in the nvm folder and reboot.
Next I tried the MetroPCS tutorial in the developer forum to get MetroPCS working, ROM and everything without success. I'm able to connect via roaming, but not on my current phone number.
Anyways, if you or anyone here has any ideas, I would gladly appreciate it. At least the phone is not bricked, yet.
Thanks in advance.
jamdev12 said:
Hi nrvlljr,
Thanks for the encouragement. Unfortunately it did not work for me. For some reason the phone is unable to log into the MetroPCS network as my old phone. One thing that confused me about the instructions was to save the nam1 and Nam2 data for my old phone because not once after that did I use this data to reprogram the new phone. All it says is to replace the ESN and meid numbers in the nvm folder and reboot.
Next I tried the MetroPCS tutorial in the developer forum to get MetroPCS working, ROM and everything without success. I'm able to connect via roaming, but not on my current phone number.
Anyways, if you or anyone here has any ideas, I would gladly appreciate it. At least the phone is not bricked, yet.
Thanks in advance.
Click to expand...
Click to collapse
Ok, so after more fiddling, I was able to get Data working, but no talk and text. To get data working, I had to run DFS to import the latest PRL from MetroPCS into the phone. Once I did that and rebooted the phone, 3G started to work, but still could not get Talk and Text to work.
Then I did the worst thing that I could have done, I think. I order for me to get Talk and Text working, I took the phone to a MetroPCS. Well, I let them run the phone through Houdini and now Talk and Text work, but I can't get 3G to work even though I have a plan that has Talk, Text and Data and I have reloaded the MetroPCS PRL in the phone.
Has anyone ran into this problem? Would I have to get my phone off the MetroPCS database in order for me to get 3G running again? Any help would be gladly appreciated.
Hello, I, new here..
I have literally tried everything i have read from forum to forum, post to post, from installing DIAG drivers to QPST, apn, anycut, everything i have found and cannot make my EVO to connect to the web. My sister had this phone fully working (except 4G) and now that i transferred it to my account i make calls and text but not MMS or WEB. less 3G. I am very frustrated but willing to keep on reading instructions if anyone would be able to help!!. Thank you very much and you guys are doing a very great job. miraculously i am obtaining knowledge i never even though it existed! unfortunately havent being able to solve my problem.
jamdev12 said:
Ok, so after more fiddling, I was able to get Data working, but no talk and text. To get data working, I had to run DFS to import the latest PRL from MetroPCS into the phone. Once I did that and rebooted the phone, 3G started to work, but still could not get Talk and Text to work.
Then I did the worst thing that I could have done, I think. I order for me to get Talk and Text working, I took the phone to a MetroPCS. Well, I let them run the phone through Houdini and now Talk and Text work, but I can't get 3G to work even though I have a plan that has Talk, Text and Data and I have reloaded the MetroPCS PRL in the phone.
Has anyone ran into this problem? Would I have to get my phone off the MetroPCS database in order for me to get 3G running again? Any help would be gladly appreciated.
Click to expand...
Click to collapse
What kind of phone did you use for the donor flash? I had this problem with my old evo 4g. I had it donor flashed from a freeform 1. Even though I was paying for 3g the evo didnt get it. I assumed it was because my freeform didnt have 3g so the ESN being read by the network on my evo didnt require it to send 3g data. Just a guess
Hello All, I am one of those who recently bought an HTC One V from Virgin Mobile hoping to use it on Page Plus. For last several days I have been searching on how to unlock this phone but haven't found a way to do so. I recently found some answers and have been trying to unlock the boot loader but can't seem to find a way to do it. The instructions online said to first hold down the down arrow key and press the power button next but that is not working. Does anyone know if the option to unlock the boot loader is disabled by VM? Also, has anyone figured out a way to go around it? If someone knows how to use this phone on Pageplus or is aware of any how to's, please post and I would really appreciate it.
TIA!
Register on htcdev.com, sign in, select unlock boot loader, there will be a list of phones, choose the one that says other supported phones.
From there HTC will guide you through the unlock method. There are also some guides in the general section.
As far as page plus, I know some stores will flash it for you. Check craigslist in your area and I'm sure there will be a local shop that will do it for cheap. Just choose someone reputable, nothing worse than getting conned or scammed.
Good luck!
Sent from my One V using xda app-developers app
whoshotjr2006 said:
Register on htcdev.com, sign in, select unlock boot loader, there will be a list of phones, choose the one that says other supported phones.
From there HTC will guide you through the unlock method. There are also some guides in the general section.
As far as page plus, I know some stores will flash it for you. Check craigslist in your area and I'm sure there will be a local shop that will do it for cheap. Just choose someone reputable, nothing worse than getting conned or scammed.
Good luck!
Sent from my One V using xda app-developers app
Click to expand...
Click to collapse
There's no need to give it to someone to flash.
I registered my virgin htc one v on page plus last week. Procedure is as follows:
Unlock bootloader - basically htcdev as mentioned above, once the bootloader is unlocked you can use fastboot and install a root/custom recovery (cwm or teamwin)
Root phone.
Install MSL finder app that requires root. I think this is specific per phone, not 100% sure.
Use the diag code on the phone. I think it's something like ##3424#, use the msl code, enable the modem thing.
Install the HTC diag modem driver.
now you can access the phone using QPST or CDMA workshop.
Now all you need to do after that is find a online dealer, there are a few that will do this step for free. Basically port your number or establish a new activation, give them your esn and let them register the phone to page plus. Also download a pageplus prl.
Back in QPST (I think that's what it's called) or CDMA workshop, reset your msl code to 6 0s (000000) and load the prl file on the phone. You may also have to manually set your MIN/phone number. I think activation might take care of this for you? Not 100% sure.
Make sure with the new prl the phone is rebooted and perform an activation, dial *228. With your msl set to 000000 the verizon activation should be able to be completed fine.
Now you should have a working pageplus htc one v phone. Phone and text will work. 3g is another matter, all the settings will still be set up for sprint/virgin mobile. I'm working on the 3g portion but there are tutorials that cover how to convert any phone to verizon 3g and you should/can follow those.
Quick question, what's "page plus?"
Sent from my Full Android on PrimoC using xda premium
served24 said:
Quick question, what's "page plus?"
Sent from my Full Android on PrimoC using xda premium
Click to expand...
Click to collapse
One google search can clear that up. Since we're talking about cell phones and activating it, i would think it's safe to assume it's another prepaid carrier. P+ is a reseller of verizon. The only real benefit for me is that they have a real prepaid plan, you can buy 2000 minutes for a whole year which virgin doesn't seem to have available, which is perfect for my parents. They have monthly plans which are similar but i think a bit better than virgin.
hypergreatthing said:
There's no need to give it to someone to flash.
I registered my virgin htc one v on page plus last week. Procedure is as follows:
Unlock bootloader - basically htcdev as mentioned above, once the bootloader is unlocked you can use fastboot and install a root/custom recovery (cwm or teamwin)
Root phone.
Install MSL finder app that requires root. I think this is specific per phone, not 100% sure.
Use the diag code on the phone. I think it's something like ##3424#, use the msl code, enable the modem thing.
Install the HTC diag modem driver.
now you can access the phone using QPST or CDMA workshop.
Now all you need to do after that is find a online dealer, there are a few that will do this step for free. Basically port your number or establish a new activation, give them your esn and let them register the phone to page plus. Also download a pageplus prl.
Back in QPST (I think that's what it's called) or CDMA workshop, reset your msl code to 6 0s (000000) and load the prl file on the phone. You may also have to manually set your MIN/phone number. I think activation might take care of this for you? Not 100% sure.
Make sure with the new prl the phone is rebooted and perform an activation, dial *228. With your msl set to 000000 the verizon activation should be able to be completed fine.
Now you should have a working pageplus htc one v phone. Phone and text will work. 3g is another matter, all the settings will still be set up for sprint/virgin mobile. I'm working on the 3g portion but there are tutorials that cover how to convert any phone to verizon 3g and you should/can follow those.
Click to expand...
Click to collapse
===================================
I am with you all the way and thanks for the response. My only other question is do you know if this will work for any HTV One V. I bought this from Virgin Mobile and I have a feeling that the have locked out certain things..do you know?
mairajali75 said:
===================================
I am with you all the way and thanks for the response. My only other question is do you know if this will work for any HTV One V. I bought this from Virgin Mobile and I have a feeling that the have locked out certain things..do you know?
Click to expand...
Click to collapse
Erm, i bought this on the 50$ virgin mobile sale last week. it's on page plus now.
Does that answer your question?
I mean, any CDMA HTC One V should be portable to page plus. It's all the same radio technology. GSM however will not be able to be ported to P+.
hypergreatthing said:
Erm, i bought this on the 50$ virgin mobile sale last week. it's on page plus now.
Does that answer your question?
I mean, any CDMA HTC One V should be portable to page plus. It's all the same radio technology. GSM however will not be able to be ported to P+.
Click to expand...
Click to collapse
Hi, i bought the $50 One V too and was wondering if I could follow your steps to activate on Verizon? Don't need text/3G, just wondering if my mom could use it in lieu of her dumbphone w/o paying for data on verizon postpaid. Thanks in advance!
imonfiiRe said:
Hi, i bought the $50 One V too and was wondering if I could follow your steps to activate on Verizon? Don't need text/3G, just wondering if my mom could use it in lieu of her dumbphone w/o paying for data on verizon postpaid. Thanks in advance!
Click to expand...
Click to collapse
You get text, just got to fiddle with the settings for mms.
Basically from all my tinkering it comes down to this. Yes, it works. You have to follow the steps above,
unlock the boot loader
get root installed
install the msl finder
turn on diag mode (##3424# or something)
connect to qpst
change the msl to 000000
put in a prl that's made for sprint phones on verizon (not too hard to find)
reboot
make sure your esn is associated to pageplus (online resellers of minutes can do this for free if you look around), dial *228 for activation
make a call out to set up your voicemail
to get quasi 3g (it's not 3g due to ha/aaa shared secret passwords that as far as i know you can't get with a sprint phone for whatever reason) you have to play with qpst and setup the m.i.p. profiles, an/un for verizon. It says 3g but it's like 1x speed slow.
To get full 3g speed you have to get the right shared passwords which as far as i've been able to determine are associated with your esn. I've read somewhere that you need a real verizon phone, swap esns, reactivate data, copy the passwords, swap esns back and program the sprint phone with the shared secret passwords. As far as i can tell this is the donor phone method. I haven't been able to verify that method but i might be able to in a month or so when i get my hands on a verizon phone.
You'll want to do this setting up before installing any custom roms. I installed pacman on mine after setting it up for page plus.
hypergreatthing said:
You get text, just got to fiddle with the settings for mms.
Basically from all my tinkering it comes down to this. Yes, it works. You have to follow the steps above,
unlock the boot loader
get root installed
install the msl finder
turn on diag mode (##3424# or something)
connect to qpst
change the msl to 000000
put in a prl that's made for sprint phones on verizon (not too hard to find)
reboot
make sure your esn is associated to pageplus (online resellers of minutes can do this for free if you look around), dial *228 for activation
make a call out to set up your voicemail
to get quasi 3g (it's not 3g due to ha/aaa shared secret passwords that as far as i know you can't get with a sprint phone for whatever reason) you have to play with qpst and setup the m.i.p. profiles, an/un for verizon. It says 3g but it's like 1x speed slow.
To get full 3g speed you have to get the right shared passwords which as far as i've been able to determine are associated with your esn. I've read somewhere that you need a real verizon phone, swap esns, reactivate data, copy the passwords, swap esns back and program the sprint phone with the shared secret passwords. As far as i can tell this is the donor phone method. I haven't been able to verify that method but i might be able to in a month or so when i get my hands on a verizon phone.
You'll want to do this setting up before installing any custom roms. I installed pacman on mine after setting it up for page plus.
Click to expand...
Click to collapse
Is it necessary to change the msl to 000000 in order for the phone to work? I didn't change it and my phone works fine on Page plus. I understand it won't be able to receive OTA updates, but is that 100% necessary? What happens if I don't change it to 000000?
pm me if you would like a link that i believe has the data issue fixed i cant post in thread
I read on another forum people were having problems doing this method after updating to the newest firmware with the phone. Mine is updated can anyone give me some insight on what I can do?
hypergreatthing said:
...
Basically ...Yes, it works..
You'll want to do this setting up before installing any custom roms. I installed pacman on mine after setting it up for page plus.
Click to expand...
Click to collapse
Hi, I recently installed the RhythmicRom v1.2e after failing to get PacMan to boot (latest radio update created issues...) I was using GrooveIP previously, but now I'm thinking PagePlus would be more mobile. Will I have to Factory reset/wipe Rom before flashing PP? any work arounds? thanks.
Hi first off let me start out by saying I am a big newb to this kind of thing the most I have ever done is root a couple of phones and installed a couple of roms a long time ago. I didn't intend on buying my opt g but I was on Craigslist and saw it at a steal of a price so I picked it up. The phone was already previously flashed to cricket (that's what I have) it was on the sprint network before. I activated it when I got home but my data does not work I read up on line and by the looks of it I think there is a fix for this I haven't tested Mms but I will put my money on saying it doesn't work either. Can someone help me get pointed in the right direction to where I can find a tutorial or guide on how to get my data working. I found some stuff but it's for other phones and I didn't really understand the directions and the stuff I found was from 2010 so I'm thinking that's old info. In advance thank you everyone also I don't know if it matters or not but on my cricket plan I have 3g so that's what I am trying to get to work on phone
jacobp1223 said:
I activated it when I got home but my data does not work I read up on line and by the looks of it I think there is a fix for this I haven't tested Mms but I will put my money on saying it doesn't work either.
Click to expand...
Click to collapse
I think you just need to change the APN's.
Go to Settings->More...->Mobile Networks->Access Point Names and select the relevant APN if it is there.
If not, you'll need to find the details for your provider (Google "Cricket APN") and add them to the device (don't forget to save).