What started out as an effort to get my migrated XV6800 to operate on Verizon's data network has taken a nasty turn for the worse... Here is the long, sordid story, and I would really appreciate help in getting this device back onto the Verizon network.
This was originally a Qwest phone. I unlocked it and flashed it with a Verizon ROM, the file name is _Verizon XV6800_RUU_TITAN_VZW_WWE_3.57.605.1_RS_TITAN_3.37. 75_OM_VZW_ShipFULL. After I did that the customization routines did not run. Frankly, I don't know if they were supposed to or not, but they didn't.
I couldn't get the phone to connect to the Verizon network, even on *228. Eventually I applied a PRL and then I was able to connect to *228, and option #3 got the phone onto the voice network. I used it as my cell phone for two weeks with no issues on the voice network. Still, I wasn't able to get data working.
These are the things I tried while troubleshooting the data issue:
* Loaded the carrier cab from DCD
* Forced a CDMA only connection to download new keys
* Loaded the newest Verizon ROMs I found while at their website (this is the first time I saw customization routines)
* Told Verizon to switch me from pay as you go data to unlimited data (though it looks like they never turned this on)
* Tried activating my PDA with a different Verizon number, and then re-activating it with my original Verizon number
* Did a hard reset
It's those last two steps that screwed me. After I swapped the number off the phone I wasn't able to get it back. I could get to option #3, but it wouldn't let me activate the phone. Their tech support is no help and they are shocked when they look back at my account history and see that I was able to use *228 to get this phone on their network two weeks ago.
I then did a hard reset and got myself all the way back to the point where I was before I manually put the PRL in place. When I dial *228 I get the following: "Your account is not authorized to make calls to this phone number. I you would like to have additional capabilities added to your account please call customer service. Message 4, swich 691". I'm guessing that installing a PRL on the phone will now let me use option #3, because that's what made it work last time. However, I'm looking for instructions since I messed up somewhere in the process last time.
I just tried the following, but I get a recording saying they are unable to activate my phone at this time and then it tried to connect me to a person.
1. Install PRL
2. Install carrier cab
3. Install MMS cab
4. Run *228, #3
I know the person is just going to tell me that they can't help because their system doesn't recognize the ESN.
So what's the verdict, can I expect to get this phone back onto the voice network, will it ever work on the data network? Any help that anyone can offer in resolving this would be greatly appreciated.
Wrong forum? Should this have gone into upgrades?
moved thread by request of OP as Q&A forum did not provide answers nor does the OP expect it to.
Best regards,
Flar
Since being able to dial *228, have you called customer service to pull a new key for your device? When I upgraded a xv6800 rom I was not able to dial *228 until I did that. It was a bit of work getting it to pull the new key, but they did it. They first walked me through a manual registration process, then I think they tried to push it through and that worked.
Is your phone a Verizon phone? The pickle I'm in is that mine is not. When they ask me for the ESN they say it's unrecognized and that's pretty much it. They say they can't help me get it on the network because it's not a Verizon phone.
mfreema said:
Since being able to dial *228, have you called customer service to pull a new key for your device? When I upgraded a xv6800 rom I was not able to dial *228 until I did that. It was a bit of work getting it to pull the new key, but they did it. They first walked me through a manual registration process, then I think they tried to push it through and that worked.
Click to expand...
Click to collapse
Yep mine is a verizon phone. I am wondering if this is a new implementation, because I have flashed several roms before and never had to call them to get my phone activated until about a month ago. When you dial *228 does it allow you to do a phone programing, I think it is option 1?
No. 1, 2, & 3 all fail. I just called tech support again, hoping getting a new A key would resolve this. He told me he couldn't give me an A key unless the phone's ESN was in the system and the only way to get it in there is through *228, #3... Kind of a Catch 22.
His last suggestion was that I activate a different PDA on my number and see if maybe the computer is choking because my current phone isn't a PDA, and this one is. Kind of sounds like clutching at straws, but he said at this point I've done all that can be done, short of that.
I find really odd, and extremely frustrating, that I can't find anyone else who has been through this with a non-Verizon phone.
mfreema said:
Yep mine is a verizon phone. I am wondering if this is a new implementation, because I have flashed several roms before and never had to call them to get my phone activated until about a month ago. When you dial *228 does it allow you to do a phone programing, I think it is option 1?
Click to expand...
Click to collapse
Related
Just finished playing with my new 6900 and want to activate it (GPS seems to be working even with the cdma antenna off). I don't know if it's because I'm not in my home area or because they are onto the custom rom but activation fails by *228,2 *228,1 *228,3 (followed by *228,1) and even by typing the esn into the website. This is a brand new unactivated phone. The fail message says to call customer service. Are they going to realize it's a custom rom?
akatcl said:
Just finished playing with my new 6900 and want to activate it (GPS seems to be working even with the cdma antenna off). I don't know if it's because I'm not in my home area or because they are onto the custom rom but activation fails by *228,2 *228,1 *228,3 (followed by *228,1) and even by typing the esn into the website. This is a brand new unactivated phone. The fail message says to call customer service. Are they going to realize it's a custom rom?
Click to expand...
Click to collapse
Nah, just tell em you recently flashed the 6.1 ROM update, or you Master Reset the phone and even after *228 you can't get the phone to authenticate calls. They will re-establish it in the system and you'll be good to go.
fwaits said:
Nah, just tell em you recently flashed the 6.1 ROM update, or you Master Reset the phone and even after *228 you can't get the phone to authenticate calls. They will re-establish it in the system and you'll be good to go.
Click to expand...
Click to collapse
Gave them a call. The woman I spoke to had me dial ##778 which didn't work (because of nfsfans's dialer app that came with his 6.5 package, I guess).
Any thoughts?
akatcl said:
Gave them a call. The woman I spoke to had me dial ##778 which didn't work (because of nfsfans's dialer app that came with his 6.5 package, I guess).
Any thoughts?
Click to expand...
Click to collapse
Try ##778# that should do it. Or you can go in to your file explorer and under the windows folder run the EPST.ink
kilroy1stcav said:
Try ##778# that should do it. Or you can go in to your file explorer and under the windows folder run the EPST.ink
Click to expand...
Click to collapse
I should have updated the thread... I figured out the ##778# thing this morning but then the password was not 000000 so I had to run getspc.exe to retrieve it. Now, they've gone through the manual set up and, with them doing a couple things on their end, I'm HALFWAY (maybe 1/3) there:
(1) the phone dials but thinks it's roaming (and this mght have something to do with *228 not working...)
(2) Data connection does not work. I recall seeing how to fix this (it is missing some password info or something) and am looking for the thread now... (if someone knows where it is I'd be much obliged) .
I've made 3-4 calls to verizon now, each but the last ending suddenly when they suggested I do a hard reset.
Truthfully, I swear there's some issue with my account that requires voodoo everytime I need to activate a phone. This was my first custom rom but on two different numbers with a handful of pda phones, I can't remember the last time an activation was smoothly. A phone on my other line was roaming mysteriously for a while too and only remedied when I activated a new one.
Thanks all!
Some of the devs and I from the Android porting scene came across recently that *228 option 1 on Verizon does not work. After we intiate option 1, it goes 5 secs and then the error message lady pops up and says that it cant be completed at this time and to call customer care. From working with Verizon, I know tech support is useless for this issue so I am wondering if anybody here has came across this issue and if there is a fix for it. Currently we have tried this on Verizon stock rom and both NSFAN's 6.1 and 6.5 roms and its still a no go.
thanks for the new thread, hated to clutter the other one... I'll be calling to try and get a new AKEY shortly.
Ok, done this so far:
flashed imcoke .40
flashed vzw mr1 stock rom
no joy
Customer Support: 18009220204
Option 3. tech support
Option 3. ??
Option 4. winmo/blck/palm/etc
Option 2. all others
(acct pw) -> transferred
CSR:
"phone 'didn't update,' (something in the 'system')"
*228, opt 2
restart
test call, 'exernal operator' message
epst -> edit -> unlock code: 000000
nam -> edit mdn -> (my number)
home sid/nid #1 -> 02/65535 (probably by area?)
upd -> yes -> ok -> restart
test call, 'exernal operator' message
hold -> trouble ticket.
Has anyone tried #8899 (tech support)? See this thread. Apparently requesting a new AKEY shouldn't be a big deal...
Got voice working
Called the #8899 number. He walked me through changing my MSID back to my 10-digit number in EPST. He also did a 'security update' OTA by having me call #2539, which I think is a new AKEY. People may be able to avoid the pain by going into EPST and fixing their MDN, Home SID/NID #1, and MSID.
So voice is working now, but no data yet - and *228 opt 1 _still_ doesn't work. Anyone (really) know the difference between option 1 and option 2?
Edit:
Got data working now, too... ##778, edit, MIP Default Profile, change NAI to reflect your mobile number.
Also see this ppcgeeks thread.
Oh, but *228 opt 1 still doesn't work.
Edit #2:
Sorry for any confusion - for #2539 you need to have a tech support rep already on the phone. They'll call you on a landline and have you call #2539 from your cell. They'll ask you to tell them when you get put on hold. Then they do something behind the scenes. But you can't just call the number, no one will pick you up on the other side.
i had this problem last night they said the phone "malfunctioned" so i brought it in and they sent me a new one i just got it 5 minutes ago and now *228 1 works fine even after i unlocked it and put nfans 6.5 on it
pasqualeparillo said:
i had this problem last night they said the phone "malfunctioned" so i brought it in and they sent me a new one i just got it 5 minutes ago and now *228 1 works fine even after i unlocked it and put nfans 6.5 on it
Click to expand...
Click to collapse
Have you ran the Android port since you got your new phone and what custom rom and radio did you install?
pasqualeparillo said:
i had this problem last night they said the phone "malfunctioned" so i brought it in and they sent me a new one i just got it 5 minutes ago and now *228 1 works fine even after i unlocked it and put nfans 6.5 on it
Click to expand...
Click to collapse
Hopefully that's not the real fix... If it is, those of us without a warranty are screwed!
I should have a new phone tomorrow. I got the same story from Verizon last night. Im thinking it has something to do if you flash the rom while having a data connection allready setup? Maybe if the thing was in airplane mode first it might work better. I dont know, but im kind of thinking it screws their system up if its active. Ill try and flash the new one before activating the phone. Hopefully that will work.
For the record a tech from VZW finally called me today. Told him that it had been resolved but said I still couldn't *228 opt 1. He said 1 and 2 are almost the same so... maybe this isn't a big concern?
tallnerd1985 said:
Have you ran the Android port since you got your new phone and what custom rom and radio did you install?
Click to expand...
Click to collapse
yeah i have quite a few times with all the different versions of android and hero etc.... and now im still using nfans
ok thanks again mrkite but now calls are not working(data is though!) it acts as if my phone is unactivated. i guess im gonna try the #2539
that's weird...
sorry to hear that... I can't see why changing the MIP settings would affect your calls... Sorry about any confusion about #2539, I edited my post above. What message are you getting when you make calls?
I really recommend calling the #8899 number instead of customer service. They told me to look at settings in EPST that customer service didn't, and they weren't shy about sending a new AKEY through #2539.
it turns out that changing msid to my mobile number is what killed mt calls i called tech support and they gave me a different number to put in my msid and it works now i have calls and data(Finally)
thanks again mrkite38
So I had my Evo 4g rooted with Unrevoked3, had some nice ROMs and all that fun bling stuff for a few months without a hitch. Yesterday I had my number changed, didn't bother returning to stock or anything. I couldn't dial out or send texts (but could send texts) but had access to the mobile network. So I unrooted, returned to stock (no OTA cuz I intend to root it again), ran through Sprint's activation again and still exact same issue.
I get this message when I attempt dialing out and also when I dial my new number from a diff line: "We could not complete your call. Please try again." Google voice works fine though - but again, so does the mobile network.
Sprint customer service is no help - and right now the Sprint store is closed, so here I be. Any help would be appreciated.
it sounds like the number is not configured correctly on sprint's end. taking it into the store may be the only way to get it fixed. or go onto the sprint website n try
{ParanoiA} said:
it sounds like the number is not configured correctly on sprint's end. taking it into the store may be the only way to get it fixed. or go onto the sprint website n try
Click to expand...
Click to collapse
This, or call *2.
Problem solved! Turns out it was my Google Voice number integrated with my old Sprint number that was creating conflicts with my phone being able to use the new Sprint number. Talk about a whack attack. I spoke with five diff techs trying to figure this one out.
Man, I did all that unrooting and resetting for nothin! Except, of course, for other Google Voice subscribers to learn from my experience...
Hello,
First, let me express my deepest thanks in advance for those of you who may be of assistance. I have visited this site many times over the years when I needed to find the answers to smartphone related issues (mostly rooting..etc). I have usually found the information that I needed via reading posts and trial and error; however, I am having a problem that I cannot find the answer to and it is frustrating the crap out of me.
So, here goes:
I bought a LG LS980 off of Ebay. It was locked to Sprint and I had a friend of mine root it (since I couldn't figure it out and it ended up being that the firmware had to be downgraded since a patch was bumped to it) and unlocked (or so i was told, but I do not know how to find out). It is currently running Cyanogenmod 12.1. I wanted to use my old phone's SIM and pop it into my new phone so that I could enjoy it (the old phone was a Nexus and ran hella slow). So, anyway.... I contacted NET10 customer support since that is my carrier and explained what I wanted to do. They let me know that as long as it is unlocked that I would be able to just swap the SIM into the new phone and should be good to go. They checked my IMEI and said that the phone was, indeed, compatible and as long as it is unlocked it should just be a matter of a simple ROM swap. Not the case. I put the SIM in and booted it up. It went from No Service to saying "Sprint" on the upper left hand corner. I try to make a call and it states that, "The code or number that I am dialing is incorrect, please try the code or number again". I looked this up on the internet and didn't find a focused answer. I talked to my friend and he stated that I may have to set up a new APN profile.
I have checked the APN settings on it and all of the APN profiles have the prefix "Verizon". I used this mini tutorial at http://forums.androidcentral.com/goo...-settings.html along with the NET10 settings to try and make a profile. Both of their workarounds don't seem to work. I can enter about half of the information and then either click BACK or SAVE and then the profile is gone. I am not sure this is the reason that my phone is not working, but I thought I would give it a try. I have also tried to use this tutorial: http://forum.xda-developers.com/showthread.php?t=2798566 as a loose guide, TWRP installed. Keep in mind that I believe that my firmware was rolled back to ZVE. and not ZVD. When I have tried to edit the build.prop values at the tutorial states it does not save. Also, there are two lines that are not even in my build.prop (ro.build.target_operator and persist.service.crash.enable). When I have tried to edit or add it adds them but does not save and definitely does not persist through reboot. I feel as if I am close to getting the phone to work, but I am unsure where to go from here. I really do NOT want to have to go back to a stock ROM and all of that because....well.... my friend did the rooting and installing of cyanogenmod and I don't want to risk undoing all of his work and having to pay $ to have it done all over again (I have rooted phones..etc, but this G2 was a MOFO because of the firmware patch for me). NET10 CS and TS was of no help and they gave me a ticket number (and to tell you the truth the are outsourced and I can't understand what their reps are saying). So, does anyone have any advice or threads that I can look at? Like I said, I feel as if it is close, but no matter what number I call it says that recording. I get no incoming calls (although it rings when listening to the incoming calling phone's speaker). I am also unable to send or receive SMS or MMS messages. Any help would be greatly appreciated. I am not the most technically savvy person, but I can answer your questions to the best of my ability and I am good at following directions. (I have about 5-6 phone root/ROMS under my belt and even 2-3 SPRINT to NET10 activations, but this one is just perplexing the crap out of me) . Could it be that the phone is not unlocked???? How do I check this??? Is there a way??? When I put in the NET10 SIM it never asked me for an unlock code so I am assuming that my friend unlocked it? I have also tried "Turn the phone ON and type 2945#801# If nothing happens, type 2945#802# or 2945#*803#" and no hidden menu appears asking for an unlock code.
Hello,
First, let me express my deepest thanks in advance for those of you who may be of assistance. I have visited this site many times over the years when I needed to find the answers to smartphone related issues (mostly rooting..etc). I have usually found the information that I needed via reading posts and trial and error; however, I am having a problem that I cannot find the answer to and it is frustrating the crap out of me.
So, here goes:
I bought a LG LS980 off of Ebay. It was locked to Sprint and I had a friend of mine root it (since I couldn't figure it out and it ended up being that the firmware had to be downgraded since a patch was bumped to it) and unlocked (or so i was told, but I do not know how to find out). It is currently running Cyanogenmod 12.1. I wanted to use my old phone's SIM and pop it into my new phone so that I could enjoy it (the old phone was a Nexus and ran hella slow). So, anyway.... I contacted NET10 customer support since that is my carrier and explained what I wanted to do. They let me know that as long as it is unlocked that I would be able to just swap the SIM into the new phone and should be good to go. They checked my IMEI and said that the phone was, indeed, compatible and as long as it is unlocked it should just be a matter of a simple ROM swap. Not the case. I put the SIM in and booted it up. It went from No Service to saying "Sprint" on the upper left hand corner. I try to make a call and it states that, "The code or number that I am dialing is incorrect, please try the code or number again". I looked this up on the internet and didn't find a focused answer. I talked to my friend and he stated that I may have to set up a new APN profile.
I have checked the APN settings on it and all of the APN profiles have the prefix "Verizon". I used this mini tutorial at http://forums.androidcentral.com/goo...-settings.html along with the NET10 settings to try and make a profile. Both of their workarounds don't seem to work. I can enter about half of the information and then either click BACK or SAVE and then the profile is gone. I am not sure this is the reason that my phone is not working, but I thought I would give it a try. I have also tried to use this tutorial: http://forum.xda-developers.com/show....php?t=2798566 as a loose guide, TWRP installed. Keep in mind that I believe that my firmware was rolled back to ZVE. and not ZVD. When I have tried to edit the build.prop values at the tutorial states it does not save. Also, there are two lines that are not even in my build.prop (ro.build.target_operator and persist.service.crash.enable). When I have tried to edit or add it adds them but does not save and definitely does not persist through reboot. I feel as if I am close to getting the phone to work, but I am unsure where to go from here. I really do NOT want to have to go back to a stock ROM and all of that because....well.... my friend did the rooting and installing of cyanogenmod and I don't want to risk undoing all of his work and having to pay $ to have it done all over again (I have rooted phones..etc, but this G2 was a MOFO because of the firmware patch for me). NET10 CS and TS was of no help and they gave me a ticket number (and to tell you the truth the are outsourced and I can't understand what their reps are saying). So, does anyone have any advice or threads that I can look at? Like I said, I feel as if it is close, but no matter what number I call it says that recording. I get no incoming calls (although it rings when listening to the incoming calling phone's speaker). I am also unable to send or receive SMS or MMS messages. Any help would be greatly appreciated. I am not the most technically savvy person, but I can answer your questions to the best of my ability and I am good at following directions. (I have about 5-6 phone root/ROMS under my belt and even 2-3 SPRINT to NET10 activations, but this one is just perplexing the crap out of me) . Could it be that the phone is not unlocked???? How do I check this??? Is there a way??? When I put in the NET10 SIM it never asked me for an unlock code so I am assuming that my friend unlocked it? I have also tried "Turn the phone ON and type 2945#801# If nothing happens, type 2945#802# or 2945#*803#" and no hidden menu appears asking for an unlock code.
You can unlock your Sprint phone for GSM but you can't activate it to Verizon or its MVNOs.