Develop Bugs

I think ive bricked my phone?

Sup everyone
ive completly done a **** up whist trying to flash my phone with android hd rom.
ive actually put the wrong zip on to the phone and now has wiped my phone and wont boot up.
i can access recovery mode but the phone will not boot up. it gets stuck on google.
if i try to mount usb storage i get a error :
Unable to open ums lunfile (no such file or directory)
Is there a way around this PLS?

jeezy85 said:
Sup everyone
ive completly done a **** up whist trying to flash my phone with android hd rom.
ive actually put the wrong zip on to the phone and now has wiped my phone and wont boot up.
i can access recovery mode but the phone will not boot up. it gets stuck on google.
if i try to mount usb storage i get a error :
Unable to open ums lunfile (no such file or directory)
Is there a way around this PLS?
Click to expand...
Click to collapse
How this post belongs in dev area???
Go to android hd rom and ask your question or post it in Q&A!!!!
Come on

how do i delete this thread?

jeezy85 said:
how do i delete this thread?
Click to expand...
Click to collapse
Mods going to move it or if you ask they are going to delete it.Please read forum rules before posting

Flash stock images in fast boot. You can't mount USB storage on this phone anyways.
Sent from my Galaxy Nexus using xda premium

happen to me too....
I flashed an Pauls update instead of core and messed my phone up.
flash stock image then use ADB and push the rom to the sd/update.zip - then flash.
That should fix it.

You're phone is not bricked. Reflash the factory images using fastboot. http://groups.google.com/group/andr...hread/2dde45a058a737b9/43c3a418144fc6c5?pli=1

thanks for the replies really appreciate it
just to clarify
is fastboot mode recovery mode?

jeezy85 said:
thanks for the replies really appreciate it
just to clarify
is fastboot mode recovery mode?
Click to expand...
Click to collapse
Hold the Volume Up Key + Volume Down Key and then press the Power button.

jeezy85 said:
thanks for the replies really appreciate it
just to clarify
is fastboot mode recovery mode?
Click to expand...
Click to collapse
fastboot is fastboot recovery is recovery
Yeah, what Stea1thmode said
fastboot is a bit more lower level [i think] than recovery

pulling my hair out lol
im completly lost
ive downloaded the stock image... just dont know how to flash it

First of all naughty naughty please do not post questions in the development forum. I moved it over to Q&A
Ok now thats over with follow *THIS* guide to get fastboot drivers set up on your pc. Some users spend hours trying to figure it out (myself included the first time) and that guide is detailed. Install the pdanet program on your comp to get the needed drivers then boot your phone into fastboot mode and connect to your pc via usb cable. If it doesnt install the automatically then you can do it manually via the Device Manager.
Once the drivers are installed open up a command prompt and goto the folder you put the fastboot.exe file in. Type fastboot devices and it should return a number which means your phone is recognised.
Next goto *THIS* thread and follow the instructions to fastboot the Stock images back to your device and restore your phone.
Once everything is back and working READ every instruction thoroughly before doing anything in future Luckily this phone is next to impossible to brick
Mark.

thank you so much for pointing me in the right direction...
things seem to be getting worse..
im having trouble installing drivers.. (windows 7)
it keeps failing :S

jeezy85 said:
thank you so much for pointing me in the right direction...
things seem to be getting worse..
im having trouble installing drivers.. (windows 7)
it keeps failing :S
Click to expand...
Click to collapse
I have windows 7 too so it will work its just a pain to get them on.
Did you install the pdanet drivers to your pc? Did you update the drivers in the Device Manager? Please list your exact procedure you followed and where you are getting stuck.
Mark.

ok my phone gets stuck on the google sign...
if plug in my phone the comp detects it.. it starts installing the drivers Samsung mobile MTP Drivers.. then all of a sudden it says failed....i also installed Samsung_USB_Driver_for_Moblie_Phones_v1_4_6_0.exe
still no luck
i tried installing the pdanet program but it doesnt detect the phone as it doesnt boot up?

jeezy85 said:
ok my phone gets stuck on the google sign...
if plug in my phone the comp detects it.. it starts installing the drivers Samsung mobile MTP Drivers.. then all of a sudden it says failed....i also installed Samsung_USB_Driver_for_Moblie_Phones_v1_4_6_0.exe
still no luck
i tried installing the pdanet program but it doesnt detect the phone as it doesnt boot up?
Click to expand...
Click to collapse
Why are you trying to boot up the phone if you know it doesnt boot?
You need to do everything through the fastboot screen. Hold Volume Up and Volume Down buttons while pressing the power button until the big green Android icon appears and it will say fastboot on the screen.
Have your Device Manager open (from settings on your pc) so that you can dee the item pop up in the list that you need to update the driver for.
PdaNet drivers are the best ones that work for fastboot.
Mark.

when i go into fastboot mode.. then go to device manager the only thing i can see with a explanation mark is android 1.0.....
theres no samsung device or nothing

jeezy85 said:
when i go into fastboot mode.. then go to device manager the only thing i can see with a explanation mark is android 1.0.....
theres no samsung device or nothing
Click to expand...
Click to collapse
Yes thats the item you need to update the driver for.
Make sure you have installed the samsung drivers (and maybe pdanet drivers if you want to be safe) on your pc first. Then double click on the Android 1.0 item and then select Driver, Update Driver. Click Browse My Computer and then Let me pick from a list.
It should give you a few options. If you see it then select Android Adb Device but if not try one odf the samsung adb interface drivers.
Mark.

mskip i LOVE YOU!!!
starting to get somewhere got the drivers installed...
ok i typed this command in cmd where the stock img is
fastboot-windows flash all flash-all.sh
i get this
sending 'all'<0 KB>....OKAY
writing 'all'.....FAILED <remote : Unkown Partition>
Any ideas?

try just flashing the image zip.
Code:
fastboot -w update image-yakju-itl41f.zip

[NOOB FRIENDLY] [ROOT] How to Unlock bootloader, Install CWM and Root Yureka

Note - This will wipe all your data and Format Internal memory ! So keep a backup !
Steps :
Step 1. Download the file ADB and extract it to a folder on your desktop. Switch off your Micromax Yureka Android smartphone.
Step 2. Now connect your to the PC with USB cable and the LED near the speaker at the top goes red.
Step 3. As soon as the LED glows keep the vol up button pressed. You will see the fastboot screen.
Step 4. ON computer, open the downloaded folder 'ADB' and hold Shift button and right click on the empty
space of the folder and select “Open Command prompt window here”.
Step 5. Now in the command prompt window type the following command.
fastboot -i 0x1ebf oem unlock
This may delete all your data including the internal memory. Your bootloader is now unlocked.
Step 6. Now the next step is to install the CWM recovery. Download the CWM recovery and save/copy it on your ADB folder. Again hold Shift button and right click on the empty space of the folder and select “Open Command prompt window here”.
Step 7. Now type this on your command window:-
fastboot -i 0x1ebf flash recovery recovery-yu.img
You have successfully Install cwm recovery now ! Just press Volume up + Volume down + Power button to access CWM mode !
Step 8. Download the Superuser.zip file from here and move the file on your phone SD card.
Step 9. Once the SuperSu zip file is moved on your phone. Switch off you phone and boot in CWM recovery mode. TO do this press volume up + volume down + power button .
Step 10. Now your phone will boot on Recovery mode, for the main screen of the recover main menu Select Install zip from Sd card and Select Superuser.zip file that you copied on your phone Sd card.
Step 11. Once the files is installed, Reboot your Device.
Now your have to rooted Micromax YU Yureka.
Enjoy !
Download Link:
ADB : https://drive.google.com/folderview?id=0B05Crz57q4zgaTA4U0xtUFpmYlk&usp=sharing
CWM Recovery : https://drive.google.com/file/d/0B05Crz57q4zgd1FCdlk5NnMzV1U/view?usp=sharing
SuperSu : https://drive.google.com/file/d/0B05Crz57q4zgOHllSndBUTdYeHc/view?usp=sharing
Hit thanks, if helped

can you share the link of TWRP Recovery also...!!!
Triggered from my Nexus 10

Tried not working
Sent from my YUREKA using XDA Free mobile app

amitroutray said:
can you share the link of TWRP Recovery also...!!!
Triggered from my Nexus 10
Click to expand...
Click to collapse
TWRP recovery is now official for yu yureka. You can get flash it easily using 'TWRP Manager' app, which is available in play store.
Download Link of App : https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager
Install the app and choose your device and flash !
Hit thanks, if Helped

pbvayadande said:
Tried not working
Sent from my YUREKA using XDA Free mobile app
Click to expand...
Click to collapse
You must be doing something wrong. Double check it !
Hit thanks, if helped !

I did today morning worked. Installed cwm recovery and also rooted.
Thanks.
Sent from my YUREKA using XDA Free mobile app

pbvayadande said:
Tried not working
Sent from my YUREKA using XDA Free mobile app
Click to expand...
Click to collapse
Always check the MD5 before doing anything.
Triggered from YU

waiting for device error coming
waiting for device error coming

mfu007 said:
waiting for device error coming
Click to expand...
Click to collapse
Enable USB Debugging before connecting to your pc and give permissions (if asked, it will be displayed on your mobile screen) !
Hit thanks, if helped

prince.d.emperor said:
Enable USB Debugging before connecting to your pc and give permissions (if asked, it will be displayed on your mobile screen) !
Hit thanks, if helped
Click to expand...
Click to collapse
usb debugging enabled then also waiting for device is coming.i am using win 8 64bit.please help me

mfu007 said:
usb debugging enabled then also waiting for device is coming.i am using win 8 64bit.please help me
Click to expand...
Click to collapse
Device is not being recognised by your pc. Open command prompt in that folder and type 'adb devices' and press enter. You will get the name of your device (if recognised). If you don't get any name, then your Yureka is not being recognised and you need to install adb drivers for yureka.
You can try this one. Link : http://www.koushikdutta.com/post/universal-adb-driver
Hit thanks, if helped

I did by running bat file....
While in fastboot method I had error waiting for device
Sent from my YUREKA using XDA Free mobile app

pbvayadande said:
I did by running bat file....
While in fastboot method I had error waiting for device
Sent from my YUREKA using XDA Free mobile app
Click to expand...
Click to collapse
how.. can you explain

The instructions are incomplete so there will be no rooting unless you install proper micromax drivers for adb . Looks like the instructions were emailed and posted by someone else. Disabling driver signature enforcement is also not helpful .Tried it on 4 different systems and a fresh vm with x86,x64 win7 & win8 . drivers from koushik also does not work

abs0lut3z33r0 said:
The instructions are incomplete so there will be no rooting unless you install proper micromax drivers for adb . Looks like the instructions were emailed and posted by someone else. Disabling driver signature enforcement is also not helpful .Tried it on 4 different systems and a fresh vm with x86,x64 win7 & win8 . drivers from koushik also does not work
Click to expand...
Click to collapse
Can you please provide me the link of drivers which will help?

How I did by running bat
Links given below
http://www.informationlord.com/unlock-bootloader-micromax-yu/
http://www.informationlord.com/install-cwm-micromax-yu/
Try this simple way
Sent from my YUREKA using XDA Free mobile app

Universal naked driver along with minimal adb and fastboot worked .

Can anyone explained how I remain in Stock recovery when rooting...??
thanks in advance
Triggered from my Nexus 10

amitroutray said:
Can anyone explained how I remain in Stock recovery when rooting...??
thanks in advance
Triggered from my Nexus 10
Click to expand...
Click to collapse
This will help you out!!! http://forum.xda-developers.com/yureka/general/20-2-2015-root-flashing-custom-recovery-t3035281

amitroutray said:
Can anyone explained how I remain in Stock recovery when rooting...??
thanks in advance
Triggered from my Nexus 10
Click to expand...
Click to collapse
Get the stock recovery backed up from /dev/block/platform/xyz.. Then flash cwm, root, then flash stock recovery
-------------------------------------------
HIT Thanks if you like my post
-------------------------------------------
My work:
[TOOL]Kernel/Boot.img (un)packer
[ZIP]Flashable zip to bypass lockscreen for LG E975
[TOOL]ANDROID's COMPLETE TOOLBOX
Baseband Fix fir LG F180X converted to International E975

[stock q&a][miui7] ask anything niob friendly[2016]

Hello,
Hey all if u have newly rooted your xiaomi redmi 1s or want to root it and u have any questions about the roms or stock miui queries post here
Thanks.

HELP!! Cannot root my Redmi 1S
I have tried multiple times to root my Redmi 1S and have failed. I keep getting, "Install update.zip failed". The screens shows 99% and then the error message pops up. I ame on Miui Covery 2.0.1 and Miui 7.2.1.0. I am trying to install TWRP on the phone and switch over to CM11 or CM12. Any ideas on how I can resolve this error and root my phone?

I installed cm13 and SD card as adapted storage .How to flash a new ROM using twrp because it's not showing SD card.

dxsyrz said:
I installed cm13 and SD card as adapted storage .How to flash a new ROM using twrp because it's not showing SD card.
Click to expand...
Click to collapse
There won't be any sdcard bro!! You have formatted the sd card as adaptive storage i.e., your sdcard is now a part of android system. So twrp will not show your sdcard anymore.

Suggestions needed guys!!
Want to root latest stock global rom
Sent from my HM 1S using Tapatalk

sonjamin said:
I have tried multiple times to root my Redmi 1S and have failed. I keep getting, "Install update.zip failed". The screens shows 99% and then the error message pops up. I ame on Miui Covery 2.0.1 and Miui 7.2.1.0. I am trying to install TWRP on the phone and switch over to CM11 or CM12. Any ideas on how I can resolve this error and root my phone?
Click to expand...
Click to collapse
Bro leave that stock method its just not happening try to flash recovery through fastboot mode u will need a pc but its safe and works 100% follow the steps carefully
1)Download latest TWRP Recovery from official site and keep it on ur desktop
2)Download Minimal ADB and Fastboot if u havent and install it in ur pc in the C: drive
3)Place the downloaded twrp 3....img to the folder u just installed ADB Fastboot
4)Rename the twrp 3.0....img to recovery.img
5)Boot phone to fastboot mode by swithing off the mob and the pressing vol down + powet button simultaneously the phone wld boot to fastboot and u wld see a dead boy Fastboot writtn below him
4)Connect Phone to PC and make sure u have installed the drivers of 1S
6)Opem Adb fastboot by going to the dir u installed it and opening MAF.exe
Type the following commands one by one
1) fastboot devices
If ur device is listed u may proceed or else check for correct drivers
2) fastboot flash recovery recovery.img
It wld start flashing and it wld be done in just 2 secs
3) after this all is done open phone back and remove battery remove usb cable and the again insert battery and press vol up+ power button simultaneously and the phone wld boot to twrp the it wld ask allow modifications then swipe it to completely wipe stock rec out.
You're Done
Hit Thanks if Helped
Sent from my CP8298_I00 using XDA-Developers mobile app

manudduke said:
Suggestions needed guys!!
Want to root latest stock global rom
Sent from my HM 1S using Tapatalk
Click to expand...
Click to collapse
See my post dude
Sent from my CP8298_I00 using XDA-Developers mobile app

Msf107252 said:
Bro leave that stock method its just not happening try to flash recovery through fastboot mode u will need a pc but its safe and works 100% follow the steps carefully
1)Download latest TWRP Recovery from official site and keep it on ur desktop
2)Download Minimal ADB and Fastboot if u havent and install it in ur pc in the C: drive
3)Place the downloaded twrp 3....img to the folder u just installed ADB Fastboot
4)Rename the twrp 3.0....img to recovery.img
5)Boot phone to fastboot mode by swithing off the mob and the pressing vol down + powet button simultaneously the phone wld boot to fastboot and u wld see a dead boy Fastboot writtn below him
4)Connect Phone to PC and make sure u have installed the drivers of 1S
6)Opem Adb fastboot by going to the dir u installed it and opening MAF.exe
Type the following commands one by one
1) fastboot devices
If ur device is listed u may proceed or else check for correct drivers
2) fastboot flash recovery recovery.img
It wld start flashing and it wld be done in just 2 secs
3) after this all is done open phone back and remove battery remove usb cable and the again insert battery and press vol up+ power button simultaneously and the phone wld boot to twrp the it wld ask allow modifications then swipe it to completely wipe stock rec out.
You're Done
Hit Thanks if Helped
Sent from my CP8298_I00 using XDA-Developers mobile app
Click to expand...
Click to collapse
manudduke said:
Suggestions needed guys!!
Want to root latest stock global rom
Sent from my HM 1S using Tapatalk
Click to expand...
Click to collapse
See my quote bro
Sent from my CP8298_I00 using XDA-Developers mobile app

Phone bricked, only acces in fastboot mode

Hi,
My phone is bricked, cause i used twrp temporaly, to install a new rom, but after an unexpected wipe my phone lost OS files so i'm just able to use adb & fastboot with the fastboot mode, so lock & unlock oem principaly. Please help me it's very very important cause i need to use this phone ...
Thanks.

Is your bootloader (still) unlocked and do you have access to fastboot?

Veran125 said:
Is your bootloader (still) unlocked and do you have access to fastboot?
Click to expand...
Click to collapse
Yes, bootloader's still unlocked and i have acces to fastboot.

Find "Mi A2 Lite toolkit V 1.0.4.2" and use it to flash stock 8.1, it will do all the magic with a few clicks, just don't interrupt it until your phone restarts and you get the "Welcome" screen. After you can do the upgrade to Pie via OTA.

mr_techno said:
Find "Mi A2 Lite toolkit V 1.0.4.2" and use it to flash stock 8.1, it will do all the magic with a few clicks, just don't interrupt it until your phone restarts and you get the "Welcome" screen. After you can do the upgrade to Pie via OTA.
Click to expand...
Click to collapse
Thanks for your magic answer, but i can't find your toolkit, BUT i found this https://forum.xda-developers.com/mi...ol-tool-one-driversunlocktwrpfactory-t3866191. Is it good also ?

You can just get newest fastboot rom, and then flash with Miflash

Veran125 said:
You can just get newest fastboot rom, and then flash with Miflash
Click to expand...
Click to collapse
If it was too simply ... I think i did that already, But fastboot room, what do you mean with that ?
I just want, now, to be sure, can i save my phone ? It's not dead ?
Cause it's a very good phone and i don't want to loose it, really.

Nope, it's not dead, even with locked bootloader it wouldn't be. But now that you've got an unlocked bootloader, it's very easy to restore

I'm more happy so, 5 hours ( no fake really ) i search a solution .... SO
I found a global rom without .bat files in this folder so i got an error with Mi Flash Tool .. Tell me more about your idea

What's the error if I may ask?

Veran125 said:
What's the error if I may ask?
Click to expand...
Click to collapse
Can not found ( don't remember the file name).bat

FamosoFT said:
Hi,
My phone is bricked, cause i used twrp temporaly, to install a new rom, but after an unexpected wipe my phone lost OS files so i'm just able to use adb & fastboot with the fastboot mode, so lock & unlock oem principaly. Please help me it's very very important cause i need to use this phone ...
Thanks.
Click to expand...
Click to collapse
-Tente isso:
Download this official rom: https://en.miui.com/download-354.html
Download this Mi Flash Tool: http://api.en.miui.com/url/MiFlashTool
*I'm assuming you already have the ADB drivers installed on your PC
*Remember to check the CLEAN ALL option
-If the above method does not work, do the following:
* It will only work if you do not have TWRP installed, if it is with twrp installed, I recommend reinstalling the original recovery *
1-Turn off the device and press (POWER BUTTON + VOLUME UP). At that point, the android doll will appear and spelled 'NO COMMAND'
2-Press only (POWER BUTTON) and click quickly (VOLUME UP BUTTON). In this screen you will see the recovery options, use the volume buttons to go to the WIPE DATA/FACTORY RESET option, confirm with YES and restart the device.
3- Wait patiently for 3/5 minutes.
-If none of this works and you can still access twrp, I recommend you try installing a GSI rom using this method: https://forum.xda-developers.com/mi-a2-lite/how-to/guide-functional-twrp-magisk-pie-gsi-t3900119
I recommend this GSI rom (I'm using this now): https://get.resurrectionremix.com/?dir=gsi (choose 'arm64-ab')
This will give you a working system and make it easier to return to stock.
Hope one of these methods helped!

Hi all,
The problem was my PC i had not the .bat files so it couldn't work ...
Thanks @Bruno_Designer for your message, but i hate RROS but you're solution was good

FamosoFT said:
Hi,
My phone is bricked, cause i used twrp temporaly, to install a new rom, but after an unexpected wipe my phone lost OS files so i'm just able to use adb & fastboot with the fastboot mode, so lock & unlock oem principaly. Please help me it's very very important cause i need to use this phone ...
Thanks.
Click to expand...
Click to collapse
If u alredy used twrp den u have adb.
U need mi flash tool.
Download any one of the full fastboot roms for Mi A2 Lie below:
9.6.4.0: https://xiaomifirmware.com/download/10399/
9.6.10.0: https://xiaomifirmware.com/download/10867/
10.0.3: https://xiaomifirmware.com/download/11586/
So to revive ur fone, u do dis. Dis was how i did mine.
1. After downloading a rom of choice, u extract on ur pc using winrar, 7zip or izarc. U basically open the archive using any of these software n copy out the folder contained. The name usually starts with "daisy global ...."
2. U open the extracted rom folder. U will see a bunch of files including "flash_all.bat" etc and a folder called "images".
3. Click on the address bar of d rom folder and copy the address. Den open "mi flash tool" and paste d copied address in the mi flash tool address bar n click on refresh.
4. Boot ur phone to fastboot mode, using "power" & "volume down" buttons together.
connect d phone to ur pc via usb cable.
5. Open ur adb folder and open the adb command window.
Type in the following, one after the other n click enter:
" fastboot devices " dis to confirm the adb connection
" fastboot oem edl " dis to enter edl mode. Ur fone led starts blinking at 1sec intervals.
6. Back to mi flash tool, u click on "refresh". After a second ur fone should be seen as a COM port "COM 10"
7. At d bottom right, u shd find 3 options. Selct "clean all". This shd leave ur bootloader unlocked after the process.
8. U click on "flash" button at the top right. All things going well, within 10 mins the process shd be done and u will see "green" indicator with "success".
9. Hold ur fone n press d power botton for 10 secs. Then ur fone shd power up. Give ur fone exactly about 5 mins to come up "look at the clock & dnt assume"
Dis is an edit of others tutorials. But this is exactly how it worked for me. As long as u use any of the 3 roms i linked u.
Unless i use edl mode, it jus doesnt work for me.
Good luck. Leta know how it goes. And pls click thanks if i helped u.

Problem solved
Thread closed at OP request

Question Updating problem please help cuz no one can :(

i have asus Rog 6 ( Tncent )
i used this tool https://forum.xda-developers.com/t/...e-6-can-be-used-for-cn-ww-converting.4474383/
that been posted in the site
now android 13 is out for asus rog 6
1- i tryed to update it from my phone but update failed
2- i tryed using my PC and adb commands when entering the recovery mode update from ADB ( not found )
3- when my device is ON i can do adb devices and i can see my device is listed but when entering recovery mode i cant see my device
4- i tryed using adb devices in fast boot mode but again i cant see my device
except when my device is on
5- why it said my country is ch and when entering the settings I suppose to be WW ?
i cant update my phone and i cant find any way ...
any one can help me i will be very greatfull

D game said:
i have asus Rog 6 ( Tncent )
i used this tool https://forum.xda-developers.com/t/...e-6-can-be-used-for-cn-ww-converting.4474383/
that been posted in the site
now android 13 is out for asus rog 6
1- i tryed to update it from my phone but update failed
2- i tryed using my PC and adb commands when entering the recovery mode update from ADB ( not found )
3- when my device is ON i can do adb devices and i can see my device is listed but when entering recovery mode i cant see my device
4- i tryed using adb devices in fast boot mode but again i cant see my device except when my device is on
i cant update my phone and i cant find any way ...
any one can help me i will be very greatfull
Click to expand...
Click to collapse
Are you using the side port? like the instructions on your link says?
How to flash:
Plug the USB Type-C cable into the port on the side
Reboot into bootloader
Extract RAW firmware zip and run flashall_AFT.cmd
You'll see "FLASH COMPLETE. RESTART!" when flashing is completed
Rebooting will open recovery, so do a Factory data reset.
Done!

D game said:
i have asus Rog 6 ( Tncent )
i used this tool https://forum.xda-developers.com/t/...e-6-can-be-used-for-cn-ww-converting.4474383/
that been posted in the site
now android 13 is out for asus rog 6
1- i tryed to update it from my phone but update failed
2- i tryed using my PC and adb commands when entering the recovery mode update from ADB ( not found )
3- when my device is ON i can do adb devices and i can see my device is listed but when entering recovery mode i cant see my device
4- i tryed using adb devices in fast boot mode but again i cant see my device except when my device is on
i cant update my phone and i cant find any way ...
any one can help me i will be very greatfull
Click to expand...
Click to collapse
Are you installed driver for fastboot mode? It' named Qualcomm fastboot driver or something similar to that.
Use side port for up fw/row.

tuannghia1985 said:
Are you installed driver for fastboot mode? It' named Qualcomm fastboot driver or something similar to that.
Use side port for up fw/row.
Click to expand...
Click to collapse

JEANRIVERA said:
Are you using the side port? like the instructions on your link says?
How to flash:
Plug the USB Type-C cable into the port on the side
Reboot into bootloader
Extract RAW firmware zip and run flashall_AFT.cmd
You'll see "FLASH COMPLETE. RESTART!" when flashing is completed
Rebooting will open recovery, so do a Factory data reset.
Done!
Click to expand...
Click to collapse
any links
beside this is the file i downloaded

Link on stack:
ADB Android Device Unauthorized
Since I reinstalled Eclipse (simply deleted and downloaded it again) I can't debug my applications on Samsung Galaxy i9001 (with CyanogenMod - Android 4.4.2). It worked fine before reinstallation.
stackoverflow.com

tuannghia1985 said:
Link on stack:
ADB Android Device Unauthorized
Since I reinstalled Eclipse (simply deleted and downloaded it again) I can't debug my applications on Samsung Galaxy i9001 (with CyanogenMod - Android 4.4.2). It worked fine before reinstallation.
stackoverflow.com
View attachment 5879327
View attachment 5879331
Click to expand...
Click to collapse
Same problem when entring the recovery mode

A little help by Bing.

tuannghia1985 said:
A little help by Bing.
View attachment 5879345
Click to expand...
Click to collapse
Same result idk why this is happening

any help ??

D game said:
any help ??
Click to expand...
Click to collapse
Contact me in telegram @soranerr0r i will fix it for free.