i have asus Rog 6 ( Tncent )
i used this tool https://forum.xda-developers.com/t/...e-6-can-be-used-for-cn-ww-converting.4474383/
that been posted in the site
now android 13 is out for asus rog 6
1- i tryed to update it from my phone but update failed
2- i tryed using my PC and adb commands when entering the recovery mode update from ADB ( not found )
3- when my device is ON i can do adb devices and i can see my device is listed but when entering recovery mode i cant see my device
4- i tryed using adb devices in fast boot mode but again i cant see my device
except when my device is on
5- why it said my country is ch and when entering the settings I suppose to be WW ?
i cant update my phone and i cant find any way ...
any one can help me i will be very greatfull
D game said:
i have asus Rog 6 ( Tncent )
i used this tool https://forum.xda-developers.com/t/...e-6-can-be-used-for-cn-ww-converting.4474383/
that been posted in the site
now android 13 is out for asus rog 6
1- i tryed to update it from my phone but update failed
2- i tryed using my PC and adb commands when entering the recovery mode update from ADB ( not found )
3- when my device is ON i can do adb devices and i can see my device is listed but when entering recovery mode i cant see my device
4- i tryed using adb devices in fast boot mode but again i cant see my device except when my device is on
i cant update my phone and i cant find any way ...
any one can help me i will be very greatfull
Click to expand...
Click to collapse
Are you using the side port? like the instructions on your link says?
How to flash:
Plug the USB Type-C cable into the port on the side
Reboot into bootloader
Extract RAW firmware zip and run flashall_AFT.cmd
You'll see "FLASH COMPLETE. RESTART!" when flashing is completed
Rebooting will open recovery, so do a Factory data reset.
Done!
D game said:
i have asus Rog 6 ( Tncent )
i used this tool https://forum.xda-developers.com/t/...e-6-can-be-used-for-cn-ww-converting.4474383/
that been posted in the site
now android 13 is out for asus rog 6
1- i tryed to update it from my phone but update failed
2- i tryed using my PC and adb commands when entering the recovery mode update from ADB ( not found )
3- when my device is ON i can do adb devices and i can see my device is listed but when entering recovery mode i cant see my device
4- i tryed using adb devices in fast boot mode but again i cant see my device except when my device is on
i cant update my phone and i cant find any way ...
any one can help me i will be very greatfull
Click to expand...
Click to collapse
Are you installed driver for fastboot mode? It' named Qualcomm fastboot driver or something similar to that.
Use side port for up fw/row.
tuannghia1985 said:
Are you installed driver for fastboot mode? It' named Qualcomm fastboot driver or something similar to that.
Use side port for up fw/row.
Click to expand...
Click to collapse
JEANRIVERA said:
Are you using the side port? like the instructions on your link says?
How to flash:
Plug the USB Type-C cable into the port on the side
Reboot into bootloader
Extract RAW firmware zip and run flashall_AFT.cmd
You'll see "FLASH COMPLETE. RESTART!" when flashing is completed
Rebooting will open recovery, so do a Factory data reset.
Done!
Click to expand...
Click to collapse
any links
beside this is the file i downloaded
Link on stack:
ADB Android Device Unauthorized
Since I reinstalled Eclipse (simply deleted and downloaded it again) I can't debug my applications on Samsung Galaxy i9001 (with CyanogenMod - Android 4.4.2). It worked fine before reinstallation.
stackoverflow.com
tuannghia1985 said:
Link on stack:
ADB Android Device Unauthorized
Since I reinstalled Eclipse (simply deleted and downloaded it again) I can't debug my applications on Samsung Galaxy i9001 (with CyanogenMod - Android 4.4.2). It worked fine before reinstallation.
stackoverflow.com
View attachment 5879327
View attachment 5879331
Click to expand...
Click to collapse
Same problem when entring the recovery mode
A little help by Bing.
tuannghia1985 said:
A little help by Bing.
View attachment 5879345
Click to expand...
Click to collapse
Same result idk why this is happening
any help ??
D game said:
any help ??
Click to expand...
Click to collapse
Contact me in telegram @soranerr0r i will fix it for free.
Related
Finally I have compiled a CWM RECOVERY 5.0.2.8 for Micromax A56
FIRST AND FOREMOST THING : I WILL NOT BE HELD RESPONSIBLE FOR ANY BRICKS
The recovery is easy to flash too as there is a FLASHER by me also .
Make sure you have installed all drivers for your phone and USB DEBUGGING is enabled
Steps to flash the CWM Recovery :-
1. Download the zip from here
2. Extract the zip in a folder.
3. Run CWM Recovery.bat and follow the simple steps :good:
4. Use the key combination to enter recovery
Known Bugs :
No UI. Means black screen still everything working.
What's working?
Everything as reported by the beta tester.
Thanks to : 1. I, me and Myself for taking the initiative and trying
2. jyothisthaliath for the files and being a tester of all recoveries i provided and for testing when i asked him to
3. Cyanogen-mod for the sources
File Deleted Bro Plz fix the links
Links will be up in an hour
!
Edit : links updated
Eklovya said:
Links will be up in an hour
!
Click to expand...
Click to collapse
Yeah !! Grt man !! W8ng
Query
HI
I am mobile is not getting detected, please help, it shows storage & debugging mode, please tell me how to get detected in "adb" mode
It only shows <waiting for device>
please help
pradeepnayak said:
HI
I am mobile is not getting detected, please help, it shows storage & debugging mode, please tell me how to get detected in "adb" mode
Click to expand...
Click to collapse
Install your mobile drivers
Go to settings ----> applications---->development---->usb debugging
Connect phone to pc and follow steps
Sent from my LG-P725 using xda premium
done all the steps, it shows that my phone is on debugging mode
pradeepnayak said:
done all the steps, it shows that my phone is on debugging mode
Click to expand...
Click to collapse
Yes!
It shows debugging mode.
When phone is connected to pc.
Adb drivers will be installed in pc.
Then follow the simple steps
Sent from my LG-P725 using xda premium
yes done all the stuf, can u please tell me , wht to do from beginning, i am removing all the drivers, now i want all the steps to do from the start
thnx in advance
How To make Micromax A56 gets Detected in adb
pradeepnayak said:
yes done all the stuf, can u please tell me , wht to do from beginning, i am removing all the drivers, now i want all the steps to do from the start
thnx in advance
Click to expand...
Click to collapse
So Here are the setps bro
1. Download This - http://www.mediafire.com/?anpvyy1ie9h7g29
Please i have downloaded it from somewhere I have forgot that please b Kind to tell me i will post him the credit
2. Open it and Extract it somewhere So that you can easily find it .. Itz for noob
3. You will see USBDeview application click on it Please make sure To run it as Administrative .
4. You will see various driver packages (Dont Mess with any other drivers ) Delete or Right-click on All android and micromax A56 stuffs and uninstall it
5.Restart Your PC.
6.Now if you have Android SDK installed u will have a folder named (.android) in C/Users/Username/.android
7. In that folder copy this file http://www.mediafire.com/?69jcj9d1mr3z67k
8.Connect your phone to PC using Data-Cable and click on USB Debugging mode ..
9. U will get an extra CD-ROM drive in your External Device in MY-Computer click it and autorun it all the required drivers will gets installed Wait till process finishes.
10. Disconnect your phone and after that connect it ,
11. U will get your phone detected in adb devices. :good::good::good:
Please B happie to ask questions
Guyss ?? Any news on CWM?
Can someone help to fix this UI trouble Everything else is working perfect! It could be the tiniest of problems
Someone suggested using a custom graphics.h Anyone thought about that?
Or maybe the display drivers of A56 are not being supported by the CWM. Or even because backlight won't turn on maybe thats why we see a blank screen??
I'm out of ideas people
I think this cwm works..
TRY cwm 5.0.7.2 :fingers-crossed:
Galaxy Prevail have the same processor and i think its cwm can work..
SORRY but not responsible to any damage to your phone
Clone Caught!!
Look A Like of MMX A56 but with higher specs
called Prestigio MultiPhone 3500 Duo
http://www.prestigio.com/products/Smartphones/MultiPhone/MultiPhone_3500_DUO
Fast boot mode not workin
Iam new to this, I tried the above methods it detected my mobile in ADB.Ichecked with cmd. But my mobile is not detected in fast boot mode... please help me out wen i opened cmd and i typed "fastboot devices" it didnt show my device... so kindly help me out....
MrJhakass said:
Look A Like of MMX A56 but with higher specs
called Prestigio MultiPhone 3500 Duo
http://www.prestigio.com/products/Smartphones/MultiPhone/MultiPhone_3500_DUO
Click to expand...
Click to collapse
Haha... dude.. this is the exact same phone. Specs are not higher u see. Check detailed specs u can see "Installed RAM size: 256 MB". 1Ghz processor is not an issue bcoz processor model is the same MSM7225A. It may be just overclocked in this one. Good find bro
Also check this one I found : http://solo.vn/dien-thoai/mobell-s20-p225957.html
---------- Post added at 11:52 AM ---------- Previous post was at 11:43 AM ----------
jayakumar007 said:
Iam new to this, I tried the above methods it detected my mobile in ADB.Ichecked with cmd. But my mobile is not detected in fast boot mode... please help me out wen i opened cmd and i typed "fastboot devices" it didnt show my device... so kindly help me out....
Click to expand...
Click to collapse
Make sure u use these steps to enable fastboot mode on your phone. It is critical that u follow it word by word.
1. Turn OFF your phone. Do not connect USB now
2. Press the power button once, you will get the vibration feedback.
3. Once you feel the vibration, immediately let go of the power button and press the volume down button.
4. Keep pressing for 10 seconds, you will see that the screen gets stuck at the Superfone logo.
Congrats, now your phone will be in fastboot mode!!
5. Connect USB cable, wait for a few seconds.
6. type "fastboot devices". It will show the name of the phone, usually something like "COOLPADA7019 fastboot"
Eklovya said:
Finally I have compiled a CWM RECOVERY 5.0.2.8 for Micromax A56
FIRST AND FOREMOST THING : I WILL NOT BE HELD RESPONSIBLE FOR ANY BRICKS
The recovery is easy to flash too as there is a FLASHER by me also .
Make sure you have installed all drivers for your phone and USB DEBUGGING is enabled
Steps to flash the CWM Recovery :-
1. Download the zip from here
2. Extract the zip in a folder.
3. Run CWM Recovery.bat and follow the simple steps :good:
4. Use the key combination to enter recovery
Known Bugs :
No UI. Means black screen still everything working.
What's working?
Everything as reported by the beta tester.
Thanks to : 1. I, me and Myself for taking the initiative and trying
2. jyothisthaliath for the files and being a tester of all recoveries i provided and for testing when i asked him to
3. Cyanogen-mod for the sources
Click to expand...
Click to collapse
check this
Hi everybody,
Recently I have bought an I-mobile IQ 9.2A in Thailand. Based on the MTK6589, I rooted it. But yesterday, I modified some values in the build.prop file:
ro.product.model=Galaxy S4
ro.product.brand=Samsung
ro.product.manufacturer=Samsung
I rebooted my phone and now it can't start anymore. Could you please help me? I can access recovery mode (NOT CWM) and 'factory mode' that allows me to do some test. Also, I have the original build.prop file i saved before.
I can't access so I can't access USB-debugging OPTION.
I can't install ADB...
Any option?
Myself- said:
Hi everybody,
Recently I have bought an I-mobile IQ 9.2A in Thailand. Based on the MTK6589, I rooted it. But yesterday, I modified some values in the build.prop file:
ro.product.model=Galaxy S4
ro.product.brand=Samsung
ro.product.manufacturer=Samsung
I rebooted my phone and now it can't start anymore. Could you please help me? I can access recovery mode and 'factory mode' that allows me to do some test. Also, I have the original build.prop file i saved before.
Click to expand...
Click to collapse
First Connect your phone to pc.....
Put it in recovery mode....
You need all adb and android device drivers installed....
Download Android Commander....
Select your phone model and now you can access root folders on your pc...
Do the rest of task....
Press thnx if it works....
N'ayam Amarsh'e said:
First Connect your phone to pc.....
Put it in recovery mode....
You need all adb and android device drivers installed....
Download Android Commander....
Select your phone model and now you can access root folders on your pc...
Do the rest of task....
Press thnx if it works....
Click to expand...
Click to collapse
I try to install adb but i can't..
use aroma filemanager.
yashade2001 said:
use aroma filemanager.
Click to expand...
Click to collapse
How can i install aroma if i don't have cwm installed?
I only have in recovery:
reboot system now
apply udpate from ADB
apply udpate from sdcard
apply udpate from cache
wipe data/factory reset
wipe cache partition
backup user data
restore user data
No help?
Myself- said:
I only have in recovery:
reboot system now
apply udpate from ADB
apply udpate from sdcard
apply udpate from cache
wipe data/factory reset
wipe cache partition
backup user data
restore user data
Click to expand...
Click to collapse
use mtk droid tools to install cwm on phone .....
N'ayam Amarsh'e said:
use mtk droid tools to install cwm on phone .....
Click to expand...
Click to collapse
I try this method but the problem is about adb... I can't install them and so I can't use this software... I tried 20 times to install theses drivers but it's not working and i followed step by step all the guides.
Can I install the drivers without being able to boot my phone to android menu?
Myself- said:
I try this method but the problem is about adb... I can't install them and so I can't use this software... I tried 20 times to install theses drivers but it's not working and i followed step by step all the guides.
Can I install the drivers without being able to boot my phone to android menu?
Click to expand...
Click to collapse
You don't need to install it in phone you need to install it in your pc....
Go to this link
Code:
http://adbdriver.com/downloads/
Install it in your pc as you do other apps....
now you can connect your phone with pc but make sure your phone is connected to pc with genuine usb cable and the phone is in recovery mode....
N'ayam Amarsh'e said:
You don't need to install it in phone you need to install it in your pc....
Go to this link
Code:
http://adbdriver.com/downloads/
Install it in your pc as you do other apps....
now you can connect your phone with pc but make sure your phone is connected to pc with genuine usb cable and the phone is in recovery mode....
Click to expand...
Click to collapse
Please...
I can't install ADB
In all tutorials they ask me to enable USB-debugging before installing ADB.. But I CAN T access to the phone to enable USB-debugging... SO how to install ADB
Myself- said:
Please...
I can't install ADB
In all tutorials they ask me to enable USB-debugging before installing ADB.. But I CAN T access to the phone to enable USB-debugging... SO how to install ADB
Click to expand...
Click to collapse
don't listen to anyone just download the software from the link i gave you and install it on your pc .... if you can't do this just download mtk usb driver and install it in your pc then connect your phone to pc in recovery mode as in this mode usb debugging is already on as default... then you would be able to see your device in mtkdt.... if you can't do this aol just give your phone for repairing....
this is the last solution i have and dont ask me about another tutorials....
i just give solutions or i just close the thread..
N'ayam Amarsh'e said:
don't listen to anyone just download the software from the link i gave you and install it on your pc .... if you can't do this just download mtk usb driver and install it in your pc then connect your phone to pc in recovery mode as in this mode usb debugging is already on as default... then you would be able to see your device in mtkdt.... if you can't do this aol just give your phone for repairing....
this is the last solution i have and dont ask me about another tutorials....
i just give solutions or i just close the thread..
Click to expand...
Click to collapse
The program say 'device not found'
I managed to flash my phone with the original firmware from the recovery option.
You can delete this post
Hello Users,
I have a Asus Zenfone 2 [Z00a]. Yesterday I want downgrade my phone to Stock Rom (Android 5). After I installed some files with Adb on my Pc, I restarted my Phone and I want to go the Recovery Mode. Now my Recovery Mode doesn't functionate. When my Phone start I come into Bootloader Mode instantly without push any buttons on my Phone. When I selected the Recovery Mode with the Power Button. My Phone restart automatic and the Bootloader start again.
I hope you can help me.
Scoocyjuice
Scoocyjuice said:
Hello Users,
I have a Asus Zenfone 2 [Z00a]. Yesterday I want downgrade my phone to Stock Rom (Android 5). After I installed some files with Adb on my Pc, I restarted my Phone and I want to go the Recovery Mode. Now my Recovery Mode doesn't functionate. When my Phone start I come into Bootloader Mode instantly without push any buttons on my Phone. When I selected the Recovery Mode with the Power Button. My Phone restart automatic and the Bootloader start again.
I hope you can help me.
Scoocyjuice
Click to expand...
Click to collapse
flash boot.img, recovery.img from fastboot
sukhwant717 said:
flash boot.img, recovery.img from fastboot
Click to expand...
Click to collapse
My Computer doesn't find my phone when I connected with a cable.
Tried different USB cables and USB ports?
Scoocyjuice said:
My Computer doesn't find my phone when I connected with a cable.
Click to expand...
Click to collapse
when you connect ur phone to pc does pc make any detection sound or not. open device manager and remove and connect phone to pc. see if any change happens there
Can you send me the flash.img and the TWRP Recovery for my Asus Zenfone 2?
sukhwant717 said:
when you connect ur phone to pc does pc make any detection sound or not. open device manager and remove and connect phone to pc. see if any change happens there
Click to expand...
Click to collapse
. After two mouth my PC can see my Asus and Minmal ADB can see my Asus too. What's the next step?
Scoocyjuice said:
. After two mouth my PC can see my Asus and Minmal ADB can see my Asus too. What's the next step?
Click to expand...
Click to collapse
flash raw firmware..
sukhwant717 said:
flash raw firmware..
Click to expand...
Click to collapse
Without any Recovery? I've tried to install TWRP on my Asus. The Pc said: The Installation ist successfully and when I go to the Recovery Mode on my Phone it is the same as before. Yesterday I put out the SD-card of my Phone and I want to copy the data on my Pc. My Pc said the SD-card hat a wrong Patition. I think that's is the Problem!
Scoocyjuice said:
Without any Recovery? I've tried to install TWRP on my Asus. The Pc said: The Installation ist successfully and when I go to the Recovery Mode on my Phone it is the same as before. Yesterday I put out the SD-card of my Phone and I want to copy the data on my Pc. My Pc said the SD-card hat a wrong Patition. I think that's is the Problem!
Click to expand...
Click to collapse
as you stated you are stuck in fastboot mode. you can flash firmware in fastboot mode
sukhwant717 said:
as you stated you are stuck in fastboot mode. you can flash firmware in fastboot mode
Click to expand...
Click to collapse
Which commad must I need for install that. Can you send me the command for me?
Scoocyjuice said:
Which commad must I need for install that. Can you send me the command for me?
Click to expand...
Click to collapse
see section install firmware without AFT
https://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Hi guys!
After years playing around with android roms and devices it looks that i probably brick a device for first time.
I'll try to be brief, but if you need more info it will be a pleasure give it to you.
Now my MI6 have recovery cofface 3.1.1.-0 installed but no os. I can reboot on bootload with keys. The problem is that im unable to push a zip into the device. Commands "adb devices" and "fastboot devices" return no devices founded.
a) OTG: Recovery doesnt allow me to mount USB-OTG. I enter in Mount and when i click over USB-OTG it highlighted but the checkbox still empty.
b)Plug into pc: The phone appears and disappears each second. Tried multiples wires.
Udev not found warning shows up when I click in the device before it disappears.
c) ADB sideload: not working, cause i cant reach MI6 from PC.
I add some stuff i see in logs and could be interesting:
When i use sideload:
Code:
I: cannot find file /sys/class/android_usb/android0/idProduct
I: cannot find file /sys/class/android_usb/android0/idVendor
When is in appear/disappear loop:
Code:
I:[MTP]Mtpserver::run fd: 20
E:[MTP] request read returned -1, errno: 5 , exiting MtpServer::run loop
I tried to recover it from Windows and Linux even from FWUL liveiso but all same results.
Any idea is appreciated, thanks a lot!
PD: Excuse my English Besides not having a good level, I'm tired of being all day trying things
Shugui said:
Hi guys!
After years playing around with android roms and devices it looks that i probably brick a device for first time.
I'll try to be brief, but if you need more info it will be a pleasure give it to you.
Now my MI6 have recovery cofface 3.1.1.-0 installed but no os. I can reboot on bootload with keys. The problem is that im unable to push a zip into the device. Commands "adb devices" and "fastboot devices" return no devices founded.
a) OTG: Recovery doesnt allow me to mount USB-OTG. I enter in Mount and when i click over USB-OTG it highlighted but the checkbox still empty.
b)Plug into pc: The phone appears and disappears each second. Tried multiples wires.
Udev not found warning shows up when I click in the device before it disappears.
c) ADB sideload: not working, cause i cant reach MI6 from PC.
I add some stuff i see in logs and could be interesting:
When i use sideload:
When is in appear/disappear loop:
I tried to recover it from Windows and Linux even from FWUL liveiso but all same results.
Any idea is appreciated, thanks a lot!
PD: Excuse my English Besides not having a good level, I'm tired of being all day trying things
Click to expand...
Click to collapse
That recovery is ancient. Just use fastboot to flash a stock rom with miflash. Then flash latest twrp.
NickTheSickDick said:
That recovery is ancient. Just use fastboot to flash a stock rom with miflash. Then flash latest twrp.
Click to expand...
Click to collapse
Commands "adb devices" and "fastboot devices" return no devices founded.
Click to expand...
Click to collapse
This is the first roadblock for him.
if fastboot devices can't detect his device, then any fastboot command to flash a partition is also invalid.
Have you tried different machine to do adb devices/ fastboot devices?
ArcOnFire said:
This is the first roadblock for him.
if fastboot devices can't detect his device, then any fastboot command to flash a partition is also invalid.
Click to expand...
Click to collapse
You right
ArcOnFire said:
Have you tried different machine to do adb devices/ fastboot devices?
Click to expand...
Click to collapse
Yes, linux and windows. And drivers are OK cause it worked before.
I think when i wiped system the device got corrupted someway. Now if i plug it into debian machine the computer detect the phone one sec., then dissapear other second, appear again... and so on.
My idea was to flash new recovery from otg but recovery didnt mount the device. Im researching for some way to mount it manually but at the moment not success.
Shugui said:
You right
Yes, linux and windows. And drivers are OK cause it worked before.
I think when i wiped system the device got corrupted someway. Now if i plug it into debian machine the computer detect the phone one sec., then dissapear other second, appear again... and so on.
My idea was to flash new recovery from otg but recovery didnt mount the device. Im researching for some way to mount it manually but at the moment not success.
Click to expand...
Click to collapse
I'm assuming it's a driver error. Few years ago i had a mtk smartphone and somehow i managed to hard brick it, PC recognize it just for 2 or 3 seconds and that was because fastboot drivers didn't installed so i had to install it manually from device manager, for mtk drivers name was preload 89xx (driver must be for specific motherboard model number), i opened device manager, boot phone in fastboot mode, connect it to pc and on the short time wen the PC recognize the phone i hited right click and choose update driver manually, i believe it could be possible to do the same thing with mi 6, i don't know if there are separate drivers for fastboot mode to be able to install them.
mArIuS% said:
I'm assuming it's a driver error. Few years ago i had a mtk smartphone and somehow i managed to hard brick it, PC recognize it just for 2 or 3 seconds and that was because fastboot drivers didn't installed so i had to install it manually from device manager, for mtk drivers name was preload 89xx (driver must be for specific motherboard model number), i opened device manager, boot phone in fastboot mode, connect it to pc and on the short time wen the PC recognize the phone i hited right click and choose update driver manually, i believe it could be possible to do the same thing with mi 6, i don't know if there are separate drivers for fastboot mode to be able to install them.
Click to expand...
Click to collapse
I'll try this when i have a bit more time. Right now i dont have all the time i desire. Too much work and university stuff
Thank you all.
I'll be back
Shugui said:
I'll try this when i have a bit more time. Right now i dont have all the time i desire. Too much work and university stuff
Thank you all.
I'll be back
Click to expand...
Click to collapse
Guys i need ur help please, i cant boot into twrp from fastboot
My step is
My step is go to fastboot > instal mi driver in device manager then adb interface coming > open adb folder > put twrp into adb folder > change name twrp file into recovery then use this command > fastboot flash recovery recovery.img then succes and fastboot boot recovery.img but just stuck on mi logo for 30minutes i guess
Fahrilubis said:
Guys i need ur help please, i cant boot into twrp from fastboot
My step is
My step is go to fastboot > instal mi driver in device manager then adb interface coming > open adb folder > put twrp into adb folder > change name twrp file into recovery then use this command > fastboot flash recovery recovery.img then succes and fastboot boot recovery.img but just stuck on mi logo for 30minutes i guess
Click to expand...
Click to collapse
fastboot devices
fastboot flash recovery twrp.img
fastboot flash boot twrp.img
fastboot reboot
i think u forgot the third command. Anyway check the info, im not 100% sure
Shugui said:
fastboot devices
fastboot flash recovery twrp.img
fastboot flash boot twrp.img
fastboot reboot
i think u forgot the third command. Anyway check the info, im not 100% sure
Click to expand...
Click to collapse
Thx brother solv
Hi,
My phone is bricked, cause i used twrp temporaly, to install a new rom, but after an unexpected wipe my phone lost OS files so i'm just able to use adb & fastboot with the fastboot mode, so lock & unlock oem principaly. Please help me it's very very important cause i need to use this phone ...
Thanks.
Is your bootloader (still) unlocked and do you have access to fastboot?
Veran125 said:
Is your bootloader (still) unlocked and do you have access to fastboot?
Click to expand...
Click to collapse
Yes, bootloader's still unlocked and i have acces to fastboot.
Find "Mi A2 Lite toolkit V 1.0.4.2" and use it to flash stock 8.1, it will do all the magic with a few clicks, just don't interrupt it until your phone restarts and you get the "Welcome" screen. After you can do the upgrade to Pie via OTA.
mr_techno said:
Find "Mi A2 Lite toolkit V 1.0.4.2" and use it to flash stock 8.1, it will do all the magic with a few clicks, just don't interrupt it until your phone restarts and you get the "Welcome" screen. After you can do the upgrade to Pie via OTA.
Click to expand...
Click to collapse
Thanks for your magic answer, but i can't find your toolkit, BUT i found this https://forum.xda-developers.com/mi...ol-tool-one-driversunlocktwrpfactory-t3866191. Is it good also ?
You can just get newest fastboot rom, and then flash with Miflash
Veran125 said:
You can just get newest fastboot rom, and then flash with Miflash
Click to expand...
Click to collapse
If it was too simply ... I think i did that already, But fastboot room, what do you mean with that ?
I just want, now, to be sure, can i save my phone ? It's not dead ?
Cause it's a very good phone and i don't want to loose it, really.
Nope, it's not dead, even with locked bootloader it wouldn't be. But now that you've got an unlocked bootloader, it's very easy to restore
I'm more happy so, 5 hours ( no fake really ) i search a solution .... SO
I found a global rom without .bat files in this folder so i got an error with Mi Flash Tool .. Tell me more about your idea
What's the error if I may ask?
Veran125 said:
What's the error if I may ask?
Click to expand...
Click to collapse
Can not found ( don't remember the file name).bat
FamosoFT said:
Hi,
My phone is bricked, cause i used twrp temporaly, to install a new rom, but after an unexpected wipe my phone lost OS files so i'm just able to use adb & fastboot with the fastboot mode, so lock & unlock oem principaly. Please help me it's very very important cause i need to use this phone ...
Thanks.
Click to expand...
Click to collapse
-Tente isso:
Download this official rom: https://en.miui.com/download-354.html
Download this Mi Flash Tool: http://api.en.miui.com/url/MiFlashTool
*I'm assuming you already have the ADB drivers installed on your PC
*Remember to check the CLEAN ALL option
-If the above method does not work, do the following:
* It will only work if you do not have TWRP installed, if it is with twrp installed, I recommend reinstalling the original recovery *
1-Turn off the device and press (POWER BUTTON + VOLUME UP). At that point, the android doll will appear and spelled 'NO COMMAND'
2-Press only (POWER BUTTON) and click quickly (VOLUME UP BUTTON). In this screen you will see the recovery options, use the volume buttons to go to the WIPE DATA/FACTORY RESET option, confirm with YES and restart the device.
3- Wait patiently for 3/5 minutes.
-If none of this works and you can still access twrp, I recommend you try installing a GSI rom using this method: https://forum.xda-developers.com/mi-a2-lite/how-to/guide-functional-twrp-magisk-pie-gsi-t3900119
I recommend this GSI rom (I'm using this now): https://get.resurrectionremix.com/?dir=gsi (choose 'arm64-ab')
This will give you a working system and make it easier to return to stock.
Hope one of these methods helped!
Hi all,
The problem was my PC i had not the .bat files so it couldn't work ...
Thanks @Bruno_Designer for your message, but i hate RROS but you're solution was good
FamosoFT said:
Hi,
My phone is bricked, cause i used twrp temporaly, to install a new rom, but after an unexpected wipe my phone lost OS files so i'm just able to use adb & fastboot with the fastboot mode, so lock & unlock oem principaly. Please help me it's very very important cause i need to use this phone ...
Thanks.
Click to expand...
Click to collapse
If u alredy used twrp den u have adb.
U need mi flash tool.
Download any one of the full fastboot roms for Mi A2 Lie below:
9.6.4.0: https://xiaomifirmware.com/download/10399/
9.6.10.0: https://xiaomifirmware.com/download/10867/
10.0.3: https://xiaomifirmware.com/download/11586/
So to revive ur fone, u do dis. Dis was how i did mine.
1. After downloading a rom of choice, u extract on ur pc using winrar, 7zip or izarc. U basically open the archive using any of these software n copy out the folder contained. The name usually starts with "daisy global ...."
2. U open the extracted rom folder. U will see a bunch of files including "flash_all.bat" etc and a folder called "images".
3. Click on the address bar of d rom folder and copy the address. Den open "mi flash tool" and paste d copied address in the mi flash tool address bar n click on refresh.
4. Boot ur phone to fastboot mode, using "power" & "volume down" buttons together.
connect d phone to ur pc via usb cable.
5. Open ur adb folder and open the adb command window.
Type in the following, one after the other n click enter:
" fastboot devices " dis to confirm the adb connection
" fastboot oem edl " dis to enter edl mode. Ur fone led starts blinking at 1sec intervals.
6. Back to mi flash tool, u click on "refresh". After a second ur fone should be seen as a COM port "COM 10"
7. At d bottom right, u shd find 3 options. Selct "clean all". This shd leave ur bootloader unlocked after the process.
8. U click on "flash" button at the top right. All things going well, within 10 mins the process shd be done and u will see "green" indicator with "success".
9. Hold ur fone n press d power botton for 10 secs. Then ur fone shd power up. Give ur fone exactly about 5 mins to come up "look at the clock & dnt assume"
Dis is an edit of others tutorials. But this is exactly how it worked for me. As long as u use any of the 3 roms i linked u.
Unless i use edl mode, it jus doesnt work for me.
Good luck. Leta know how it goes. And pls click thanks if i helped u.
Problem solved
Thread closed at OP request