[Q] How to replace build.prop - Upgrading, Modifying and Unlocking

Hi everybody,
Recently I have bought an I-mobile IQ 9.2A in Thailand. Based on the MTK6589, I rooted it. But yesterday, I modified some values in the build.prop file:
ro.product.model=Galaxy S4
ro.product.brand=Samsung
ro.product.manufacturer=Samsung
I rebooted my phone and now it can't start anymore. Could you please help me? I can access recovery mode (NOT CWM) and 'factory mode' that allows me to do some test. Also, I have the original build.prop file i saved before.
I can't access so I can't access USB-debugging OPTION.
I can't install ADB...
Any option?

Myself- said:
Hi everybody,
Recently I have bought an I-mobile IQ 9.2A in Thailand. Based on the MTK6589, I rooted it. But yesterday, I modified some values in the build.prop file:
ro.product.model=Galaxy S4
ro.product.brand=Samsung
ro.product.manufacturer=Samsung
I rebooted my phone and now it can't start anymore. Could you please help me? I can access recovery mode and 'factory mode' that allows me to do some test. Also, I have the original build.prop file i saved before.
Click to expand...
Click to collapse
First Connect your phone to pc.....
Put it in recovery mode....
You need all adb and android device drivers installed....
Download Android Commander....
Select your phone model and now you can access root folders on your pc...
Do the rest of task....
Press thnx if it works....

N'ayam Amarsh'e said:
First Connect your phone to pc.....
Put it in recovery mode....
You need all adb and android device drivers installed....
Download Android Commander....
Select your phone model and now you can access root folders on your pc...
Do the rest of task....
Press thnx if it works....
Click to expand...
Click to collapse
I try to install adb but i can't..

use aroma filemanager.

yashade2001 said:
use aroma filemanager.
Click to expand...
Click to collapse
How can i install aroma if i don't have cwm installed?

I only have in recovery:
reboot system now
apply udpate from ADB
apply udpate from sdcard
apply udpate from cache
wipe data/factory reset
wipe cache partition
backup user data
restore user data

No help?

Myself- said:
I only have in recovery:
reboot system now
apply udpate from ADB
apply udpate from sdcard
apply udpate from cache
wipe data/factory reset
wipe cache partition
backup user data
restore user data
Click to expand...
Click to collapse
use mtk droid tools to install cwm on phone .....

N'ayam Amarsh'e said:
use mtk droid tools to install cwm on phone .....
Click to expand...
Click to collapse
I try this method but the problem is about adb... I can't install them and so I can't use this software... I tried 20 times to install theses drivers but it's not working and i followed step by step all the guides.
Can I install the drivers without being able to boot my phone to android menu?

Myself- said:
I try this method but the problem is about adb... I can't install them and so I can't use this software... I tried 20 times to install theses drivers but it's not working and i followed step by step all the guides.
Can I install the drivers without being able to boot my phone to android menu?
Click to expand...
Click to collapse
You don't need to install it in phone you need to install it in your pc....
Go to this link
Code:
http://adbdriver.com/downloads/
Install it in your pc as you do other apps....
now you can connect your phone with pc but make sure your phone is connected to pc with genuine usb cable and the phone is in recovery mode....

N'ayam Amarsh'e said:
You don't need to install it in phone you need to install it in your pc....
Go to this link
Code:
http://adbdriver.com/downloads/
Install it in your pc as you do other apps....
now you can connect your phone with pc but make sure your phone is connected to pc with genuine usb cable and the phone is in recovery mode....
Click to expand...
Click to collapse
Please...
I can't install ADB
In all tutorials they ask me to enable USB-debugging before installing ADB.. But I CAN T access to the phone to enable USB-debugging... SO how to install ADB

Myself- said:
Please...
I can't install ADB
In all tutorials they ask me to enable USB-debugging before installing ADB.. But I CAN T access to the phone to enable USB-debugging... SO how to install ADB
Click to expand...
Click to collapse
don't listen to anyone just download the software from the link i gave you and install it on your pc .... if you can't do this just download mtk usb driver and install it in your pc then connect your phone to pc in recovery mode as in this mode usb debugging is already on as default... then you would be able to see your device in mtkdt.... if you can't do this aol just give your phone for repairing....
this is the last solution i have and dont ask me about another tutorials....
i just give solutions or i just close the thread..

N'ayam Amarsh'e said:
don't listen to anyone just download the software from the link i gave you and install it on your pc .... if you can't do this just download mtk usb driver and install it in your pc then connect your phone to pc in recovery mode as in this mode usb debugging is already on as default... then you would be able to see your device in mtkdt.... if you can't do this aol just give your phone for repairing....
this is the last solution i have and dont ask me about another tutorials....
i just give solutions or i just close the thread..
Click to expand...
Click to collapse
The program say 'device not found'

I managed to flash my phone with the original firmware from the recovery option.
You can delete this post

Related

Formatted Data.. i am struck

Hi Guys,
I wanted to do a clean install. So,i formatted Cache, System.
But by mistake i formatted Data also.
Now the ROM zip file is also lost.
Can anybody help me as how to install a new OS now.
Cheers!!!!
Can't you mount data and enable USB storage?
Sent from my Nexus 7 using xda app-developers app
use GSM TOOLKIT
Device Driver installation is getting failed.. I am able to mount though...
Connect to a computer and paste TWRP ou CWM and a ROM.
In last case, reboot to fastboot and flash google image through Galaxy Nexus toolkit.
I am not able to connect to Computer and copy any files to Phone.. But using Toolkit i should be able to push ROM to Phone.. please correct me if i am wrong...
mac4rfree said:
I am not able to connect to Computer and copy any files to Phone.. But using Toolkit i should be able to push ROM to Phone.. please correct me if i am wrong...
Click to expand...
Click to collapse
You must flash a google image through nexus toolkit and your problem will be solved.
Nope don`t make it so complicated. Flash a rom + gapps though adb sideload.
http://teamw.in/ADBSideload
mac4rfree said:
I am not able to connect to Computer and copy any files to Phone.. But using Toolkit i should be able to push ROM to Phone.. please correct me if i am wrong...
Click to expand...
Click to collapse
Connect to the toolkit and flash a stock image. I had the same problem with you. Flashing stock image is the best option.
So do the following:
1. Download toolkit (mskip) and install drives (if not installed already)
2. Coonect your phone to a pc
3. Enter fastboot mode
4. From the toolkit choose the rom you want to flash
5. then choose the option to flash stock image (option 9 i think)
6. Sit back and relax
7. start rooting your phone again.
GOOD LUCK!:fingers-crossed:
Like most people here I also advice the same solution because this solution saved my friend who was in the same situation as you.
1. Download and install Galaxy Nexus Toolkit to PC
2. Download Galaxy Nexus Stock Factory Image from Google
3. Do the 3 finger boot (power+volume up+volume down) to get into Fastboot mode
4. Plug in phone to Pc
5. Launch Galaxy Nexus toolkit and Select the option that says extract and install stock factory image
New Problem.. My phone restarted and it went to bootloader screen.. now the GSM Tool Kit is saying "Waiting for device"... Now what to be done???
What has this got to do with Development again?
Sorry My Bad... I posted it in wrong section..
I downloaded and installled GSM Tool kit. I downloaded the Google image but when i tried to flash it is booting to bootloader screen but after that Tool kit is saying <waiting for phone>
I pushed the older zip file to sdcard using adb push command and installed it..

Help I cannot install CWM anymore

Hi there,
First I have installed CWM with the method I had to use the codes "adb reboot bootloader"... and so on and It worked perfectly.
I wanted to install the Envi ROM and on the tutorial there was said I first should install the Base ROM and then after restarting I should install the Envi ROM. After installing the Base ROM my CWM was gone. Now I can't install it anymore. I tried the following install methods:
-The one I've mentioned already <- Doesnt work because my PC says it does not know the command abd
-The install.bat method <- Does not work because my phone does not get recognized, despite I have all the drivers installed.
-The RecoverX method <- Does not work because my phone does not get recognized, despite I have all the drivers installed.
-The RecoverX app <- The says that installing CWM worked normally, but still I have no CWM
-The install.bat method directly on my phone <- SManager does not run the .bat even I ran it with the proper rights and adjustments
domiankrey said:
Hi there,
First I have installed CWM with the method I had to use the codes "adb reboot bootloader"... and so on and It worked perfectly.
.....
-The one I've mentioned already <- Doesnt work because my PC says it does not know the command abd
...
Click to expand...
Click to collapse
Did You try flashing a kernel with pre installed recovery? You can flash it using fastboot directly or flashtool.
Also, the command is adb, not "abd". Plus if windows doesn't recognize adb command, then the adb.exe is not in the folder from where You are running the command prompt from.
Mirhawk said:
Did You try flashing a kernel with pre installed recovery? You can flash it using fastboot directly or flashtool.
Also, the command is adb, not "abd". Plus if windows doesn't recognize adb command, then the adb.exe is not in the folder from where You are running the command prompt from.
Click to expand...
Click to collapse
How can I flash a Kernel with a pre Installed Recovery
Where do I get the adb.exe?
domiankrey said:
How can I flash a Kernel with a pre Installed Recovery
Where do I get the adb.exe?
Click to expand...
Click to collapse
You can install the DoomKernel, it has pre installed recovery. You can flash it via flashtool fastboot. But do note, You have to be on stock ROM.
adb.exe is usually in the flashing files.
Mirhawk said:
You can install the DoomKernel, it has pre installed recovery. You can flash it via flashtool fastboot. But do note, You have to be on stock ROM.
adb.exe is usually in the flashing files.
Click to expand...
Click to collapse
I have my phone connected in fastboot mode and the fastboot.exe and the kernel are in the same directory.
When I type: fastboot flash boot kernel.elf it only says "waiting for device"...
domiankrey said:
I have my phone connected in fastboot mode and the fastboot.exe and the kernel are in the same directory.
When I type: fastboot flash boot kernel.elf it only says "waiting for device"...
Click to expand...
Click to collapse
To connect Your phone in fastboot, You have to switch off Your phone. Then press & hold volume up and then connect the phone to Your PC.
Mirhawk said:
To connect Your phone in fastboot, You have to switch off Your phone. Then press & hold volume up and then connect the phone to Your PC.
Click to expand...
Click to collapse
I know that and I did that, but still my device cannot be detected.
I started Ubuntu (Live CD) installed adb und fastboot and tried it there... same result?
Is something wrong is my phone?
I don't think the drivers have been installed properly. Install fastboot and flash mode drivers from flashtool, it has drivers in it's folder. Else if even that doesn't work, install "Sony Update Service", and it will install required drivers.
Edit: I'm giving You instructions for Windows, are You using Ubuntu or was that just a trial?
Mirhawk said:
I don't think the drivers have been installed properly. Install fastboot and flash mode drivers from flashtool, it has drivers in it's folder. Else if even that doesn't work, install "Sony Update Service", and it will install required drivers.
Edit: I'm giving You instructions for Windows, are You using Ubuntu or was that just a trial?
Click to expand...
Click to collapse
I am using Windows. I installed from flashtool and I did not work, I am gonna try Sony Update Service now.
I tried Ubuntu because somebody said me that Ubuntu will detect all the drivers automaticly and there would be no detection problem...
Edit: After INSTALLING Update Service, I still get the same Message "Device not found" Should I run my phone through update Service too?
Why did it not work on my phone with smanager?
domiankrey said:
I am using Windows. I installed from flash tool and I did not work, I am gonna try Sony Update Service now.
I tried Ubuntu because somebody said me that Ubuntu will detect all the drivers automatically and there would be no detection problem...
Edit: After INSTALLING Update Service, I still get the same Message "Device not found" Should I run my phone through update Service too?
Why did it not work on my phone with s manager?
Click to expand...
Click to collapse
I suppose your phone is Xperia S.
If you have unlocked the boot loader , then Sony Official Softwares wont work. If your boot loader is still locked and this error is occurring then its mistake from your side.
I guess by Base ROM you meant official ROM. So if you were on official ROM, did you check for Root Privileges, Busy Box is installed etc ??
Im using Xperia Ion so the steps might be different but results all are same.
Try different methods, it will work.
Captain Droid said:
I suppose your phone is Xperia S.
If you have unlocked the boot loader , then Sony Official Softwares wont work. If your boot loader is still locked and this error is occurring then its mistake from your side.
I guess by Base ROM you meant official ROM. So if you were on official ROM, did you check for Root Privileges, Busy Box is installed etc ??
Im using Xperia Ion so the steps might be different but results all are same.
Try different methods, it will work.
Click to expand...
Click to collapse
By Base Rom I mean the following; I wanted to use the Envi Rom and for this Rom a Base Rom should be installed first.
I have unlocked Bootloader. Busybox is installed and Root Priviliges are given. Before installing the Base ROM I used the APP "Smanager" and I ran the install.sh with the app and then the CWM was there. But now that doesnt work anymore and DeliverX does also not work.
And all methods which require connection to PC won't work because those methods say my device is not detected or connected. I installed CWM on my phone and on other phones several times and never I had thode problems...
domiankrey said:
... After INSTALLING Update Service, I still get the same Message "Device not found" Should I run my phone through update Service too?...
Click to expand...
Click to collapse
Do one thing, check Your Device Manager. Disconnect Your phone, Open Device Manager, then connect Your phone again. See if the Device Manager gets refreshed. If it does, Your device is being connected to the PC. Then check for Xperia S or anything related to Sony under "Other Devices" or other similar areas. Then right click on it to install drivers.
Mirhawk said:
Do one thing, check Your Device Manager. Disconnect Your phone, Open Device Manager, then connect Your phone again. See if the Device Manager gets refreshed. If it does, Your device is being connected to the PC. Then check for Xperia S or anything related to Sony under "Other Devices" or other similar areas. Then right click on it to install drivers.
Click to expand...
Click to collapse
I just did that.
My phone is getting showed under "Tragbare Geräte" which means portable devices. When I right click on it says:
-Update drivers
-Deactivate
-Uninstall
-Looking for changed hardware
-Properties
If I click on Update drivers the message shows, that the best driver is already installed.
domiankrey said:
I just did that.
My phone is getting showed under "Tragbare Geräte" which means portable devices. When I right click on it says:
-Update drivers
-Deactivate
-Uninstall
-Looking for changed hardware
-Properties
If I click on Update drivers the message shows, that the best driver is already installed.
Click to expand...
Click to collapse
There should be a device like the highlighted one in attachment.
Mirhawk said:
There should be a device like the highlighted one in attachment.
Click to expand...
Click to collapse
This is how it looks on my PC.
Since (I was told in an other Android Forum it is like this) that on Ubuntu, Ubuntu recognizes my phone automaticly and still I installed the drivers there and it didnt not work and since neither RecoverX on my phone nor smanager on my phone dit install CWM I think the problem is my phone not the PC...
domiankrey said:
This is how it looks on my PC.
Since (I was told in an other Android Forum it is like this) that on Ubuntu, Ubuntu recognizes my phone automaticly and still I installed the drivers there and it didnt not work and since neither RecoverX on my phone nor smanager on my phone dit install CWM I think the problem is my phone not the PC...
Click to expand...
Click to collapse
Could You translate what the yellow mark text is? I think the device is recognized wrongly or wrong drivers were installed for it. Unfortunately, I don't know much about Ubuntu.
Mirhawk said:
Could You translate what the yellow mark text is? I think the device is recognized wrongly or wrong drivers were installed for it. Unfortunately, I don't know much about Ubuntu.
Click to expand...
Click to collapse
What do you mean with yellowk mark text? I see no yellow text...
If you mean the 3 devices which have a yellow sign:
- Ethernet Controller should be clear.
- Teredo Tunneling Pseudo-inferface - I do not know what that is.
- Basissystemgerät - means somehting like basic system device
With other ROMS I was able to install a CWM from my phone (with the deliverx app or a script manager app), but for this rom this doesnt work anymore.
So is there a way to install an other ROM without CWM (and when I have this ROM I would try if installing CWM directly with an app works again)?
domiankrey said:
With other ROMS I was able to install a CWM from my phone (with the deliverx app or a script manager app), but for this rom this doesnt work anymore.
So is there a way to install an other ROM without CWM (and when I have this ROM I would try if installing CWM directly with an app works again)?
Click to expand...
Click to collapse
Unfortunately Your device is not being detected as an adb device. The problem would be solved if somehow it is detected in adb or if You are able to install recovery from cell. I will try to check out more. Say, did You try the goo manager app, twrp manager or rom maanager to install recovery?
Mirhawk said:
Unfortunately Your device is not being detected as an adb device. The problem would be solved if somehow it is detected in adb or if You are able to install recovery from cell. I will try to check out more. Say, did You try the goo manager app, twrp manager or rom maanager to install recovery?
Click to expand...
Click to collapse
I will Try Goo and TWRPG Manager. Rom Manager does not work with Xperia S I already tried it.
EDIT:
1. Goo Manager does not work. I installed the Open Recovery.img and then I tried to install the ROM (eXistenZ V2 Black) but it only restarts my phone <- Does not work
2. TWRPG Manager does not even the TWRPG Recovery.
3. Previously I used this App to install CWM and it worked. Now I used the App and the App said installed CWM worked but There is no CWM on my phone (or it can't get started neither manually by pressing up nor automatically with an App which reboots me into CWM). <-Does no work.
4. On other time I used this App to run the cwm-install.ch on my phone. It worked and CWM was on my phone. Now the script does not run and therefore CWM also cannot be installed with this method. <- Does not work.
5. After all that, today I tried to install an official Rom with Sony PC Companion (and then starting from 0 with an other ROM, to try all the other stuff again) but It says I cannot install the official ROM Update. because, I do not have the official ROM installed, <- Does not work
I dont know what to do anymore.

Help with unbrick LG G3

Hi,
I felt on a topic who explained how to improve my camera quality with a document from xda : http://forum.xda-developers.com/attachment.php?attachmentid=2793884&stc=1&d=1402564989
I tried it but since then my phone is stuck on bootloop. I can only access the download Mode. I tried to access my phone to back it up with adb shell but adb don't find my phone. LG PC Suite neither, but my computer detect it...
I'm on Lollipop and rooted.
Is there a way to unbrick my phone or accessing my computer to modify my system/etc ? Because I made a backup from the file that I modified.
Thank you for your help.
Ravens28 said:
Hi,
I felt on a topic who explained how to improve my camera quality with a document from xda : http://forum.xda-developers.com/attachment.php?attachmentid=2793884&stc=1&d=1402564989
I tried it but since then my phone is stuck on bootloop. I can only access the download Mode. I tried to access my phone to back it up with adb shell but adb don't find my phone. LG PC Suite neither, but my computer detect it...
I'm on Lollipop and rooted.
Is there a way to unbrick my phone or accessing my computer to modify my system/etc ? Because I made a backup from the file that I modified.
Thank you for your help.
Click to expand...
Click to collapse
Your are only root ? No custom recovery ?
If you have TWRP recovery you can use dd commands
jac10000 said:
Your are only root ? No custom recovery ?
If you have TWRP recovery you can use dd commands
Click to expand...
Click to collapse
TWRP is installed but I tried to access Recovery Mode without success.
Ravens28 said:
TWRP is installed but I tried to access Recovery Mode without success.
Click to expand...
Click to collapse
You can also restore a kdz firmware and use Normal Flash option. It restore only system and you don't lose applications and datas
http://forum.xda-developers.com/showthread.php?t=2785089
jac10000 said:
You can also restore a kdz firmware and use Normal Flash option. It restore only system and you don't lose applications and datas
http://forum.xda-developers.com/showthread.php?t=2785089
Click to expand...
Click to collapse
That seems really nice but It seems that there isn't a kdz file for v20i-EUR...
I've tried but after 15% "verifying Windows OS". It tells me that it doesn't work. I think that he doesn't connect with my phone even if my computer detects it.
Ravens28 said:
I've tried but after 15% "verifying Windows OS". It tells me that it doesn't work. I think that he doesn't connect with my phone even if my computer detects it.
Click to expand...
Click to collapse
Yes me too i have error message, but on the G3 screen we can see the flash to continu, then it restart
jac10000 said:
Yes me too i have error message, but on the G3 screen we can see the flash to continu, then it restart
Click to expand...
Click to collapse
I don't think that we speek about the same error message. Because nothing is happening on my phone. It stays on 0%.
The error message is :
Code:
Please disconnect the cable from your cell phone in order and remove and connect the battery.
Power on your cell phone and press the Restart Button to resume update.
If LG Support Tool is stopped abnormally,try with [Optons]-[Upgrade Recovery] in tool menu.
Ah yes it's not the same
USB2 or USB3 ?
jac10000 said:
Ah yes it's not the same
USB2 or USB3 ?
Click to expand...
Click to collapse
Tried both.
Haaa... If only I could connect to my phone with adb I could replace the corrupted file in system/etc/ or extract my backups from the internal sd card and then trying a complete reset with this solution : http://unbrick.itcse.com/unbrick-soft-bricked-lg-g3/
It worked but with windows 7 ! I was trying with Windows 8.1
Why I don' t know

Unable To root on latest Update

on latest update 59 if i tried to root getting this error
"Error: more than one device and emulator
sleep is not recognized as an internal or external command " {installed all adb drivers and intel drivers and enabled debugging mode enabled } Any help or suggestion needed: mad:
Reboot your pc
mr_gourav2000 said:
Reboot your pc
Click to expand...
Click to collapse
did but no solution
MateenMirza said:
did but no solution
Click to expand...
Click to collapse
Once boot into safe mod and then reboot.
Format your phone and install fresh drivers , also download the batch files again ......??
android lover 2000 said:
Format your phone and install fresh drivers , also download the batch files again ......??
Click to expand...
Click to collapse
Still unable to do it. Getting error of can't load supersu sleep error

SM-G928A ADB driver

Hi,i have read the tutorial for upgrade MM.
I have installed the driver and adb work correctly on Windows.
After reboot in recovery adb doesn't recognize s6e+.
When i push apply update from adb ,update from adb is disabled.
Thank You
A.S.LaVey said:
Hi,i have read the tutorial for upgrade MM.
I have installed the driver and adb work correctly on Windows.
After reboot in recovery adb doesn't recognize s6e+.
When i push apply update from adb ,update from adb is disabled.
Thank You
Click to expand...
Click to collapse
? When you put phone in recovery mode, did you select adb sideload option before sending file to phone? Also when you paste zip folder with firmware, did you remove .zip from the end of it?
Yes,the recovery write in the phone screen "update from ADB is disabled".
S6e+ is listed in the device AS Samsung usb composite,if i force manually "windows_ usb driver",Windows 10 don't accept.The ADB sistem work only the phone is tourned on,for me
A.S.LaVey said:
Yes,the recovery write in the phone screen "update from ADB is disabled".
S6e+ is listed in the device AS Samsung usb composite,if i force manually "windows_ usb driver",Windows 10 don't accept
Click to expand...
Click to collapse
Are you using the "15 second adb driver"?
Yes
A.S.LaVey said:
Yes
Click to expand...
Click to collapse
Not sure of what you could be doing wrong because it's compatible with Windows 10 and worked for me and others. What's you current build number?
Someone reported a similar issue on a Note 4 that related to the recovery being messed up. The only way they were able to fix it was by using ODIN to flash back to stock, booting into recovery and resetting to factory defaults, and then flashing the stock image with ODIN again. Have you tried this already? I would recommend using SmartSwitch to back up your phone and then try the ODIN, factory reset, ODIN method to see if it will restore your ADB sideload functionality.
Below is a link to the Stock image and ODIN files.
(5.1.1) 2AOJ1 ODIN files for clean flash or restoring to STOCK. Credit to: Yamaha169
https://drive.google.com/file/d/0B1dPgClURCHJTjA3dF82WnNiMzg/view
meek2100 said:
Someone reported a similar issue on a Note 4 that related to the recovery being messed up. The only way they were able to fix it was by using ODIN to flash back to stock, booting into recovery and resetting to factory defaults, and then flashing the stock image with ODIN again. Have you tried this already? I would recommend using SmartSwitch to back up your phone and then try the ODIN, factory reset, ODIN method to see if it will restore your ADB sideload functionality.
Below is a link to the Stock image and ODIN files.
(5.1.1) 2AOJ1 ODIN files for clean flash or restoring to STOCK. Credit to: Yamaha169
https://drive.google.com/file/d/0B1dPgClURCHJTjA3dF82WnNiMzg/view
Click to expand...
Click to collapse
1- Phone flashed to stock
2-Full W/Factory res.
3-Flash again
4- Reboot in recovery press" apply update from ADB " and recovery answers "update from ADB is dsabled"
the phone in recovery mode and adb mode doesn't recognised from Windows 10 V1511 (don't appear in device manager)
A.S.LaVey said:
1- Phone flashed to stock
2-Full W/Factory res.
3-Flash again
4- Reboot in recovery press" apply update from ADB " and recovery answers "update from ADB is dsabled"
the phone in recovery mode and adb mode doesn't recognised from Windows 10 V1511 (don't appear in device manager)
Click to expand...
Click to collapse
Do you have Samsung Smart Switch installed on the computer so you have Samsung's latest drivers?
I'm on Windows 10, Version 1511, Build 10586 and no matter what I try I'm unable to reproduce the situation your in. So I'm not sure what is happening.

Categories

Resources