Unable To root on latest Update - ZenFone 2 Q&A, Help & Troubleshooting

on latest update 59 if i tried to root getting this error
"Error: more than one device and emulator
sleep is not recognized as an internal or external command " {installed all adb drivers and intel drivers and enabled debugging mode enabled } Any help or suggestion needed: mad:

Reboot your pc

mr_gourav2000 said:
Reboot your pc
Click to expand...
Click to collapse
did but no solution

MateenMirza said:
did but no solution
Click to expand...
Click to collapse
Once boot into safe mod and then reboot.

Format your phone and install fresh drivers , also download the batch files again ......??

android lover 2000 said:
Format your phone and install fresh drivers , also download the batch files again ......??
Click to expand...
Click to collapse
Still unable to do it. Getting error of can't load supersu sleep error

Related

[Q] Help! No ROM and SD Card not Mounting?

Hi,
My friend was running an ICS version of ARHD and he decided he wanted to upgrade to Cyanogenmod 11. He first tried to install Cyanogenmod 11 but that didn't work, so he then tried Cyanogenmod 10.2 with a boot loop as the result.
I reckoned that he would need to upgrade his HBOOT to 1.36 or higher, which I have helped him do using the correct firmware for his CID. (H3G_001)
After that, we wiped everything in CWM and flashed CM's boot.img, but now the SDCard won't mount to transfer over the ROM and Gapps. Specifically, it comes up with the error: /storage/sdcard0: Shared-Unmounted
He has also tried adb but the device isn't found when using adb devices or adb shell.
When he tries to mount it, it appears in device manager as 'One' with a yellow triangle, but otherwise it just appears as unknown device.
We'd really appreciate any help as I'm no expert and there's nothing left I can do.
Thanks
ORStoner said:
Hi,
My friend was running an ICS version of ARHD and he decided he wanted to upgrade to Cyanogenmod 11. He first tried to install Cyanogenmod 11 but that didn't work, so he then tried Cyanogenmod 10.2 with a boot loop as the result.
I reckoned that he would need to upgrade his HBOOT to 1.36 or higher, which I have helped him do using the correct firmware for his CID. (H3G_001)
After that, we wiped everything in CWM and flashed CM's boot.img, but now the SDCard won't mount to transfer over the ROM and Gapps. Specifically, it comes up with the error: /storage/sdcard0: Shared-Unmounted
He has also tried adb but the device isn't found when using adb devices or adb shell.
When he tries to mount it, it appears in device manager as 'One' with a yellow triangle, but otherwise it just appears as unknown device.
We'd really appreciate any help as I'm no expert and there's nothing left I can do.
Thanks
Click to expand...
Click to collapse
Install Philz recovery and mount SD Card you can find it in original android section. And SD mount work try with latest if not work try 5.15.9
ORStoner said:
Hi,
My friend was running an ICS version of ARHD and he decided he wanted to upgrade to Cyanogenmod 11. He first tried to install Cyanogenmod 11 but that didn't work, so he then tried Cyanogenmod 10.2 with a boot loop as the result.
I reckoned that he would need to upgrade his HBOOT to 1.36 or higher, which I have helped him do using the correct firmware for his CID. (H3G_001)
After that, we wiped everything in CWM and flashed CM's boot.img, but now the SDCard won't mount to transfer over the ROM and Gapps. Specifically, it comes up with the error: /storage/sdcard0: Shared-Unmounted
He has also tried adb but the device isn't found when using adb devices or adb shell.
When he tries to mount it, it appears in device manager as 'One' with a yellow triangle, but otherwise it just appears as unknown device.
We'd really appreciate any help as I'm no expert and there's nothing left I can do.
Thanks
Click to expand...
Click to collapse
in CWM did you try the sideload ?? try if you didnt , or try changing the recovery.
playguy1 said:
in CWM did you try the sideload ?? try if you didnt , or try changing the recovery.
Click to expand...
Click to collapse
I have a exactly the same issue! Now I can't access to the mass storage I have no ROM installed, adb cant find my device, PC just show "ONE" with the yellow warning triangle at the device control manager. I have tried many things (sideload CWM TWRP AND Phil recovery)
How can I get back my phone? What should I do? I can't copy anything to my phone becaus of the adb "device not found" thing, and I cant update driver, because PC can't recognize my phone!
Please help me get trough this!
Thanks in advance!
Meron5 said:
I have a exactly the same issue! Now I can't access to the mass storage I have no ROM installed, adb cant find my device, PC just show "ONE" with the yellow warning triangle at the device control manager. I have tried many things (sideload CWM TWRP AND Phil recovery)
How can I get back my phone? What should I do? I can't copy anything to my phone becaus of the adb "device not found" thing, and I cant update driver, because PC can't recognize my phone!
Please help me get trough this!
Thanks in advance!
Click to expand...
Click to collapse
Download ADB drivers, worked for me with the same situation after trying half an hour
Angelo37 said:
Download ADB drivers, worked for me with the same situation after trying half an hour
Click to expand...
Click to collapse
Please tell me exactly step by step what should I do!
And thank you for your help!
Meron5 said:
Please tell me exactly step by step what should I do!
And thank you for your help!
Click to expand...
Click to collapse
Download adb drivers. Run adb devices command. If device is detected rename your rom to rom.zip. run command adb push rom.zip /sdcard/
Angelo37 said:
Download adb drivers. Run adb devices command. If device is detected rename your rom to rom.zip. run command adb push rom.zip /sdcard/
Click to expand...
Click to collapse
I can not update!
I've tried to install drivers but unfortunatelly another error came! :crying:
i have the exact same problem.
phone is only recognised with fastboot command but not adb command.
i've installed the latest android sdk and htc sync manager.
i've tried both twrp and philz/cwm recoveries and still get the same result - no access to the sd card.
windows comes up with a code 28 error (missing driver) - tried every driver i could find - htc, mtp, adb but still no results.
any help would be appreciated.
attached are screenshots.
PHP:
diagonals said:
i have the exact same problem.
phone is only recognised with fastboot command but not adb command.
i've installed the latest android sdk and htc sync manager.
i've tried both twrp and philz/cwm recoveries and still get the same result - no access to the sd card.
windows comes up with a code 28 error (missing driver) - tried every driver i could find - htc, mtp, adb but still no results.
any help would be appreciated.
attached are screenshots.
PHP:
Click to expand...
Click to collapse
try different usb port try on differnt pc try with original usb cable
Thant said:
try different usb port try on differnt pc try with original usb cable
Click to expand...
Click to collapse
tried 4 different usb ports on 2 computers with 3 different cables with the same result.
even tried reformatting the sd card into different formats.
thanks for replying.
diagonals said:
tried 4 different usb ports on 2 computers with 3 different cables with the same result.
even tried reformatting the sd card into different formats.
thanks for replying.
Click to expand...
Click to collapse
With what you reformat them with TWRP or something else? Reformat the sd card with TWRP and try again

[Q] How to replace build.prop

Hi everybody,
Recently I have bought an I-mobile IQ 9.2A in Thailand. Based on the MTK6589, I rooted it. But yesterday, I modified some values in the build.prop file:
ro.product.model=Galaxy S4
ro.product.brand=Samsung
ro.product.manufacturer=Samsung
I rebooted my phone and now it can't start anymore. Could you please help me? I can access recovery mode (NOT CWM) and 'factory mode' that allows me to do some test. Also, I have the original build.prop file i saved before.
I can't access so I can't access USB-debugging OPTION.
I can't install ADB...
Any option?
Myself- said:
Hi everybody,
Recently I have bought an I-mobile IQ 9.2A in Thailand. Based on the MTK6589, I rooted it. But yesterday, I modified some values in the build.prop file:
ro.product.model=Galaxy S4
ro.product.brand=Samsung
ro.product.manufacturer=Samsung
I rebooted my phone and now it can't start anymore. Could you please help me? I can access recovery mode and 'factory mode' that allows me to do some test. Also, I have the original build.prop file i saved before.
Click to expand...
Click to collapse
First Connect your phone to pc.....
Put it in recovery mode....
You need all adb and android device drivers installed....
Download Android Commander....
Select your phone model and now you can access root folders on your pc...
Do the rest of task....
Press thnx if it works....
N'ayam Amarsh'e said:
First Connect your phone to pc.....
Put it in recovery mode....
You need all adb and android device drivers installed....
Download Android Commander....
Select your phone model and now you can access root folders on your pc...
Do the rest of task....
Press thnx if it works....
Click to expand...
Click to collapse
I try to install adb but i can't..
use aroma filemanager.
yashade2001 said:
use aroma filemanager.
Click to expand...
Click to collapse
How can i install aroma if i don't have cwm installed?
I only have in recovery:
reboot system now
apply udpate from ADB
apply udpate from sdcard
apply udpate from cache
wipe data/factory reset
wipe cache partition
backup user data
restore user data
No help?
Myself- said:
I only have in recovery:
reboot system now
apply udpate from ADB
apply udpate from sdcard
apply udpate from cache
wipe data/factory reset
wipe cache partition
backup user data
restore user data
Click to expand...
Click to collapse
use mtk droid tools to install cwm on phone .....
N'ayam Amarsh'e said:
use mtk droid tools to install cwm on phone .....
Click to expand...
Click to collapse
I try this method but the problem is about adb... I can't install them and so I can't use this software... I tried 20 times to install theses drivers but it's not working and i followed step by step all the guides.
Can I install the drivers without being able to boot my phone to android menu?
Myself- said:
I try this method but the problem is about adb... I can't install them and so I can't use this software... I tried 20 times to install theses drivers but it's not working and i followed step by step all the guides.
Can I install the drivers without being able to boot my phone to android menu?
Click to expand...
Click to collapse
You don't need to install it in phone you need to install it in your pc....
Go to this link
Code:
http://adbdriver.com/downloads/
Install it in your pc as you do other apps....
now you can connect your phone with pc but make sure your phone is connected to pc with genuine usb cable and the phone is in recovery mode....
N'ayam Amarsh'e said:
You don't need to install it in phone you need to install it in your pc....
Go to this link
Code:
http://adbdriver.com/downloads/
Install it in your pc as you do other apps....
now you can connect your phone with pc but make sure your phone is connected to pc with genuine usb cable and the phone is in recovery mode....
Click to expand...
Click to collapse
Please...
I can't install ADB
In all tutorials they ask me to enable USB-debugging before installing ADB.. But I CAN T access to the phone to enable USB-debugging... SO how to install ADB
Myself- said:
Please...
I can't install ADB
In all tutorials they ask me to enable USB-debugging before installing ADB.. But I CAN T access to the phone to enable USB-debugging... SO how to install ADB
Click to expand...
Click to collapse
don't listen to anyone just download the software from the link i gave you and install it on your pc .... if you can't do this just download mtk usb driver and install it in your pc then connect your phone to pc in recovery mode as in this mode usb debugging is already on as default... then you would be able to see your device in mtkdt.... if you can't do this aol just give your phone for repairing....
this is the last solution i have and dont ask me about another tutorials....
i just give solutions or i just close the thread..
N'ayam Amarsh'e said:
don't listen to anyone just download the software from the link i gave you and install it on your pc .... if you can't do this just download mtk usb driver and install it in your pc then connect your phone to pc in recovery mode as in this mode usb debugging is already on as default... then you would be able to see your device in mtkdt.... if you can't do this aol just give your phone for repairing....
this is the last solution i have and dont ask me about another tutorials....
i just give solutions or i just close the thread..
Click to expand...
Click to collapse
The program say 'device not found'
I managed to flash my phone with the original firmware from the recovery option.
You can delete this post

Help I cannot install CWM anymore

Hi there,
First I have installed CWM with the method I had to use the codes "adb reboot bootloader"... and so on and It worked perfectly.
I wanted to install the Envi ROM and on the tutorial there was said I first should install the Base ROM and then after restarting I should install the Envi ROM. After installing the Base ROM my CWM was gone. Now I can't install it anymore. I tried the following install methods:
-The one I've mentioned already <- Doesnt work because my PC says it does not know the command abd
-The install.bat method <- Does not work because my phone does not get recognized, despite I have all the drivers installed.
-The RecoverX method <- Does not work because my phone does not get recognized, despite I have all the drivers installed.
-The RecoverX app <- The says that installing CWM worked normally, but still I have no CWM
-The install.bat method directly on my phone <- SManager does not run the .bat even I ran it with the proper rights and adjustments
domiankrey said:
Hi there,
First I have installed CWM with the method I had to use the codes "adb reboot bootloader"... and so on and It worked perfectly.
.....
-The one I've mentioned already <- Doesnt work because my PC says it does not know the command abd
...
Click to expand...
Click to collapse
Did You try flashing a kernel with pre installed recovery? You can flash it using fastboot directly or flashtool.
Also, the command is adb, not "abd". Plus if windows doesn't recognize adb command, then the adb.exe is not in the folder from where You are running the command prompt from.
Mirhawk said:
Did You try flashing a kernel with pre installed recovery? You can flash it using fastboot directly or flashtool.
Also, the command is adb, not "abd". Plus if windows doesn't recognize adb command, then the adb.exe is not in the folder from where You are running the command prompt from.
Click to expand...
Click to collapse
How can I flash a Kernel with a pre Installed Recovery
Where do I get the adb.exe?
domiankrey said:
How can I flash a Kernel with a pre Installed Recovery
Where do I get the adb.exe?
Click to expand...
Click to collapse
You can install the DoomKernel, it has pre installed recovery. You can flash it via flashtool fastboot. But do note, You have to be on stock ROM.
adb.exe is usually in the flashing files.
Mirhawk said:
You can install the DoomKernel, it has pre installed recovery. You can flash it via flashtool fastboot. But do note, You have to be on stock ROM.
adb.exe is usually in the flashing files.
Click to expand...
Click to collapse
I have my phone connected in fastboot mode and the fastboot.exe and the kernel are in the same directory.
When I type: fastboot flash boot kernel.elf it only says "waiting for device"...
domiankrey said:
I have my phone connected in fastboot mode and the fastboot.exe and the kernel are in the same directory.
When I type: fastboot flash boot kernel.elf it only says "waiting for device"...
Click to expand...
Click to collapse
To connect Your phone in fastboot, You have to switch off Your phone. Then press & hold volume up and then connect the phone to Your PC.
Mirhawk said:
To connect Your phone in fastboot, You have to switch off Your phone. Then press & hold volume up and then connect the phone to Your PC.
Click to expand...
Click to collapse
I know that and I did that, but still my device cannot be detected.
I started Ubuntu (Live CD) installed adb und fastboot and tried it there... same result?
Is something wrong is my phone?
I don't think the drivers have been installed properly. Install fastboot and flash mode drivers from flashtool, it has drivers in it's folder. Else if even that doesn't work, install "Sony Update Service", and it will install required drivers.
Edit: I'm giving You instructions for Windows, are You using Ubuntu or was that just a trial?
Mirhawk said:
I don't think the drivers have been installed properly. Install fastboot and flash mode drivers from flashtool, it has drivers in it's folder. Else if even that doesn't work, install "Sony Update Service", and it will install required drivers.
Edit: I'm giving You instructions for Windows, are You using Ubuntu or was that just a trial?
Click to expand...
Click to collapse
I am using Windows. I installed from flashtool and I did not work, I am gonna try Sony Update Service now.
I tried Ubuntu because somebody said me that Ubuntu will detect all the drivers automaticly and there would be no detection problem...
Edit: After INSTALLING Update Service, I still get the same Message "Device not found" Should I run my phone through update Service too?
Why did it not work on my phone with smanager?
domiankrey said:
I am using Windows. I installed from flash tool and I did not work, I am gonna try Sony Update Service now.
I tried Ubuntu because somebody said me that Ubuntu will detect all the drivers automatically and there would be no detection problem...
Edit: After INSTALLING Update Service, I still get the same Message "Device not found" Should I run my phone through update Service too?
Why did it not work on my phone with s manager?
Click to expand...
Click to collapse
I suppose your phone is Xperia S.
If you have unlocked the boot loader , then Sony Official Softwares wont work. If your boot loader is still locked and this error is occurring then its mistake from your side.
I guess by Base ROM you meant official ROM. So if you were on official ROM, did you check for Root Privileges, Busy Box is installed etc ??
Im using Xperia Ion so the steps might be different but results all are same.
Try different methods, it will work.
Captain Droid said:
I suppose your phone is Xperia S.
If you have unlocked the boot loader , then Sony Official Softwares wont work. If your boot loader is still locked and this error is occurring then its mistake from your side.
I guess by Base ROM you meant official ROM. So if you were on official ROM, did you check for Root Privileges, Busy Box is installed etc ??
Im using Xperia Ion so the steps might be different but results all are same.
Try different methods, it will work.
Click to expand...
Click to collapse
By Base Rom I mean the following; I wanted to use the Envi Rom and for this Rom a Base Rom should be installed first.
I have unlocked Bootloader. Busybox is installed and Root Priviliges are given. Before installing the Base ROM I used the APP "Smanager" and I ran the install.sh with the app and then the CWM was there. But now that doesnt work anymore and DeliverX does also not work.
And all methods which require connection to PC won't work because those methods say my device is not detected or connected. I installed CWM on my phone and on other phones several times and never I had thode problems...
domiankrey said:
... After INSTALLING Update Service, I still get the same Message "Device not found" Should I run my phone through update Service too?...
Click to expand...
Click to collapse
Do one thing, check Your Device Manager. Disconnect Your phone, Open Device Manager, then connect Your phone again. See if the Device Manager gets refreshed. If it does, Your device is being connected to the PC. Then check for Xperia S or anything related to Sony under "Other Devices" or other similar areas. Then right click on it to install drivers.
Mirhawk said:
Do one thing, check Your Device Manager. Disconnect Your phone, Open Device Manager, then connect Your phone again. See if the Device Manager gets refreshed. If it does, Your device is being connected to the PC. Then check for Xperia S or anything related to Sony under "Other Devices" or other similar areas. Then right click on it to install drivers.
Click to expand...
Click to collapse
I just did that.
My phone is getting showed under "Tragbare Geräte" which means portable devices. When I right click on it says:
-Update drivers
-Deactivate
-Uninstall
-Looking for changed hardware
-Properties
If I click on Update drivers the message shows, that the best driver is already installed.
domiankrey said:
I just did that.
My phone is getting showed under "Tragbare Geräte" which means portable devices. When I right click on it says:
-Update drivers
-Deactivate
-Uninstall
-Looking for changed hardware
-Properties
If I click on Update drivers the message shows, that the best driver is already installed.
Click to expand...
Click to collapse
There should be a device like the highlighted one in attachment.
Mirhawk said:
There should be a device like the highlighted one in attachment.
Click to expand...
Click to collapse
This is how it looks on my PC.
Since (I was told in an other Android Forum it is like this) that on Ubuntu, Ubuntu recognizes my phone automaticly and still I installed the drivers there and it didnt not work and since neither RecoverX on my phone nor smanager on my phone dit install CWM I think the problem is my phone not the PC...
domiankrey said:
This is how it looks on my PC.
Since (I was told in an other Android Forum it is like this) that on Ubuntu, Ubuntu recognizes my phone automaticly and still I installed the drivers there and it didnt not work and since neither RecoverX on my phone nor smanager on my phone dit install CWM I think the problem is my phone not the PC...
Click to expand...
Click to collapse
Could You translate what the yellow mark text is? I think the device is recognized wrongly or wrong drivers were installed for it. Unfortunately, I don't know much about Ubuntu.
Mirhawk said:
Could You translate what the yellow mark text is? I think the device is recognized wrongly or wrong drivers were installed for it. Unfortunately, I don't know much about Ubuntu.
Click to expand...
Click to collapse
What do you mean with yellowk mark text? I see no yellow text...
If you mean the 3 devices which have a yellow sign:
- Ethernet Controller should be clear.
- Teredo Tunneling Pseudo-inferface - I do not know what that is.
- Basissystemgerät - means somehting like basic system device
With other ROMS I was able to install a CWM from my phone (with the deliverx app or a script manager app), but for this rom this doesnt work anymore.
So is there a way to install an other ROM without CWM (and when I have this ROM I would try if installing CWM directly with an app works again)?
domiankrey said:
With other ROMS I was able to install a CWM from my phone (with the deliverx app or a script manager app), but for this rom this doesnt work anymore.
So is there a way to install an other ROM without CWM (and when I have this ROM I would try if installing CWM directly with an app works again)?
Click to expand...
Click to collapse
Unfortunately Your device is not being detected as an adb device. The problem would be solved if somehow it is detected in adb or if You are able to install recovery from cell. I will try to check out more. Say, did You try the goo manager app, twrp manager or rom maanager to install recovery?
Mirhawk said:
Unfortunately Your device is not being detected as an adb device. The problem would be solved if somehow it is detected in adb or if You are able to install recovery from cell. I will try to check out more. Say, did You try the goo manager app, twrp manager or rom maanager to install recovery?
Click to expand...
Click to collapse
I will Try Goo and TWRPG Manager. Rom Manager does not work with Xperia S I already tried it.
EDIT:
1. Goo Manager does not work. I installed the Open Recovery.img and then I tried to install the ROM (eXistenZ V2 Black) but it only restarts my phone <- Does not work
2. TWRPG Manager does not even the TWRPG Recovery.
3. Previously I used this App to install CWM and it worked. Now I used the App and the App said installed CWM worked but There is no CWM on my phone (or it can't get started neither manually by pressing up nor automatically with an App which reboots me into CWM). <-Does no work.
4. On other time I used this App to run the cwm-install.ch on my phone. It worked and CWM was on my phone. Now the script does not run and therefore CWM also cannot be installed with this method. <- Does not work.
5. After all that, today I tried to install an official Rom with Sony PC Companion (and then starting from 0 with an other ROM, to try all the other stuff again) but It says I cannot install the official ROM Update. because, I do not have the official ROM installed, <- Does not work
I dont know what to do anymore.

Help with unbrick LG G3

Hi,
I felt on a topic who explained how to improve my camera quality with a document from xda : http://forum.xda-developers.com/attachment.php?attachmentid=2793884&stc=1&d=1402564989
I tried it but since then my phone is stuck on bootloop. I can only access the download Mode. I tried to access my phone to back it up with adb shell but adb don't find my phone. LG PC Suite neither, but my computer detect it...
I'm on Lollipop and rooted.
Is there a way to unbrick my phone or accessing my computer to modify my system/etc ? Because I made a backup from the file that I modified.
Thank you for your help.
Ravens28 said:
Hi,
I felt on a topic who explained how to improve my camera quality with a document from xda : http://forum.xda-developers.com/attachment.php?attachmentid=2793884&stc=1&d=1402564989
I tried it but since then my phone is stuck on bootloop. I can only access the download Mode. I tried to access my phone to back it up with adb shell but adb don't find my phone. LG PC Suite neither, but my computer detect it...
I'm on Lollipop and rooted.
Is there a way to unbrick my phone or accessing my computer to modify my system/etc ? Because I made a backup from the file that I modified.
Thank you for your help.
Click to expand...
Click to collapse
Your are only root ? No custom recovery ?
If you have TWRP recovery you can use dd commands
jac10000 said:
Your are only root ? No custom recovery ?
If you have TWRP recovery you can use dd commands
Click to expand...
Click to collapse
TWRP is installed but I tried to access Recovery Mode without success.
Ravens28 said:
TWRP is installed but I tried to access Recovery Mode without success.
Click to expand...
Click to collapse
You can also restore a kdz firmware and use Normal Flash option. It restore only system and you don't lose applications and datas
http://forum.xda-developers.com/showthread.php?t=2785089
jac10000 said:
You can also restore a kdz firmware and use Normal Flash option. It restore only system and you don't lose applications and datas
http://forum.xda-developers.com/showthread.php?t=2785089
Click to expand...
Click to collapse
That seems really nice but It seems that there isn't a kdz file for v20i-EUR...
I've tried but after 15% "verifying Windows OS". It tells me that it doesn't work. I think that he doesn't connect with my phone even if my computer detects it.
Ravens28 said:
I've tried but after 15% "verifying Windows OS". It tells me that it doesn't work. I think that he doesn't connect with my phone even if my computer detects it.
Click to expand...
Click to collapse
Yes me too i have error message, but on the G3 screen we can see the flash to continu, then it restart
jac10000 said:
Yes me too i have error message, but on the G3 screen we can see the flash to continu, then it restart
Click to expand...
Click to collapse
I don't think that we speek about the same error message. Because nothing is happening on my phone. It stays on 0%.
The error message is :
Code:
Please disconnect the cable from your cell phone in order and remove and connect the battery.
Power on your cell phone and press the Restart Button to resume update.
If LG Support Tool is stopped abnormally,try with [Optons]-[Upgrade Recovery] in tool menu.
Ah yes it's not the same
USB2 or USB3 ?
jac10000 said:
Ah yes it's not the same
USB2 or USB3 ?
Click to expand...
Click to collapse
Tried both.
Haaa... If only I could connect to my phone with adb I could replace the corrupted file in system/etc/ or extract my backups from the internal sd card and then trying a complete reset with this solution : http://unbrick.itcse.com/unbrick-soft-bricked-lg-g3/
It worked but with windows 7 ! I was trying with Windows 8.1
Why I don' t know

Question Updating problem please help cuz no one can :(

i have asus Rog 6 ( Tncent )
i used this tool https://forum.xda-developers.com/t/...e-6-can-be-used-for-cn-ww-converting.4474383/
that been posted in the site
now android 13 is out for asus rog 6
1- i tryed to update it from my phone but update failed
2- i tryed using my PC and adb commands when entering the recovery mode update from ADB ( not found )
3- when my device is ON i can do adb devices and i can see my device is listed but when entering recovery mode i cant see my device
4- i tryed using adb devices in fast boot mode but again i cant see my device
except when my device is on
5- why it said my country is ch and when entering the settings I suppose to be WW ?
i cant update my phone and i cant find any way ...
any one can help me i will be very greatfull
D game said:
i have asus Rog 6 ( Tncent )
i used this tool https://forum.xda-developers.com/t/...e-6-can-be-used-for-cn-ww-converting.4474383/
that been posted in the site
now android 13 is out for asus rog 6
1- i tryed to update it from my phone but update failed
2- i tryed using my PC and adb commands when entering the recovery mode update from ADB ( not found )
3- when my device is ON i can do adb devices and i can see my device is listed but when entering recovery mode i cant see my device
4- i tryed using adb devices in fast boot mode but again i cant see my device except when my device is on
i cant update my phone and i cant find any way ...
any one can help me i will be very greatfull
Click to expand...
Click to collapse
Are you using the side port? like the instructions on your link says?
How to flash:
Plug the USB Type-C cable into the port on the side
Reboot into bootloader
Extract RAW firmware zip and run flashall_AFT.cmd
You'll see "FLASH COMPLETE. RESTART!" when flashing is completed
Rebooting will open recovery, so do a Factory data reset.
Done!
D game said:
i have asus Rog 6 ( Tncent )
i used this tool https://forum.xda-developers.com/t/...e-6-can-be-used-for-cn-ww-converting.4474383/
that been posted in the site
now android 13 is out for asus rog 6
1- i tryed to update it from my phone but update failed
2- i tryed using my PC and adb commands when entering the recovery mode update from ADB ( not found )
3- when my device is ON i can do adb devices and i can see my device is listed but when entering recovery mode i cant see my device
4- i tryed using adb devices in fast boot mode but again i cant see my device except when my device is on
i cant update my phone and i cant find any way ...
any one can help me i will be very greatfull
Click to expand...
Click to collapse
Are you installed driver for fastboot mode? It' named Qualcomm fastboot driver or something similar to that.
Use side port for up fw/row.
tuannghia1985 said:
Are you installed driver for fastboot mode? It' named Qualcomm fastboot driver or something similar to that.
Use side port for up fw/row.
Click to expand...
Click to collapse
JEANRIVERA said:
Are you using the side port? like the instructions on your link says?
How to flash:
Plug the USB Type-C cable into the port on the side
Reboot into bootloader
Extract RAW firmware zip and run flashall_AFT.cmd
You'll see "FLASH COMPLETE. RESTART!" when flashing is completed
Rebooting will open recovery, so do a Factory data reset.
Done!
Click to expand...
Click to collapse
any links
beside this is the file i downloaded
Link on stack:
ADB Android Device Unauthorized
Since I reinstalled Eclipse (simply deleted and downloaded it again) I can't debug my applications on Samsung Galaxy i9001 (with CyanogenMod - Android 4.4.2). It worked fine before reinstallation.
stackoverflow.com
tuannghia1985 said:
Link on stack:
ADB Android Device Unauthorized
Since I reinstalled Eclipse (simply deleted and downloaded it again) I can't debug my applications on Samsung Galaxy i9001 (with CyanogenMod - Android 4.4.2). It worked fine before reinstallation.
stackoverflow.com
View attachment 5879327
View attachment 5879331
Click to expand...
Click to collapse
Same problem when entring the recovery mode
A little help by Bing.
tuannghia1985 said:
A little help by Bing.
View attachment 5879345
Click to expand...
Click to collapse
Same result idk why this is happening
any help ??
D game said:
any help ??
Click to expand...
Click to collapse
Contact me in telegram @soranerr0r i will fix it for free.

Categories

Resources