Is there any progress on unbricking the htc one v, I've tried using the unlimited.io method with no luck, any help would be appreciated
in the word's of myself, your buggered....you need to send it to Repair centre..
1st hand experience here
Haha thought as much, ah well thanks anyway
or find someone with a riffbox, if its really DLOAD mode and not diagnostic then its ready for revival and wont even need cracking open (and youll get s-off/supercid too)
What's that ??
donhashem.dh said:
What's that ??
Click to expand...
Click to collapse
its a jtag box that supports several htc phones by usb you just have to short the emmc while connecting the usb to get into qcom dload mode, if youve already got dload mode you just need to connect to the riffbox and hit ressurect (and set your cid to 11111111 if you want) it will get you back to the bootloader with s-off and you can flash an ruu from there to revive it fully
Can we purchase that from stores ??
And if its hard bricked ......will it work ??
Emba4 said:
or find someone with a riffbox, if its really DLOAD mode and not diagnostic then its ready for revival and wont even need cracking open (and youll get s-off/supercid too)
Click to expand...
Click to collapse
not always, this problem shows for 2 things
1) ALL or some of the nand is broken due to radio and needs to go to HTC
2) as you said, IF it's just in DLOAD, and we have a program in the android development forum for it..
Btw if they take it to HTC what do they fix in it ??
motherboard ^
Sent from my One V
But how is hardware related with software ,if the bootloader got corrupted then why motherboard ??
Who said BL is corrupted the partitions get corrupt if I an not wrong
Sent from my One V using xda app-developers app
Related
I've searched the whole thread and tried every method to unbrick my phone but my phone wont even go in to download mode the screen is black and blank Please help all this happened after trying to unlock.
Try to charge your phone from the wall. Any luck?
Sent from my LG-LS970 using xda premium
Ninja25 said:
Try to charge your phone from the wall. Any luck?
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
I tried no luck when I connected the phone to my computer it attempted to install this driver qhsusb_dload and failed.
Try going over to the AT&T thread.
See if this post has any helpful info...
http://forum.xda-developers.com/showthread.php?t=2006946
I think that post has info on accessing the irc channel...you can get the LGNPST files from there.
Good luck.
Sent from my Optimus G using xda premium
ur phone become a hard brick,install qualcomm's driver,will appear a...qualcomm xxx 9008,pls use QPST emmcswdownload repair it,ok
Sent from my SHV-E120L using xda premium
my phones hard bricked can u plz tell me how to unbrick it ?
starteam said:
ur phone become a hard brick,install qualcomm's driver,will appear a...qualcomm xxx 9008,pls use QPST emmcswdownload repair it,ok
Sent from my SHV-E120L using xda premium
Click to expand...
Click to collapse
Plz help me unbrick my hard bricked phone
I wouldn't recommend it. Please go to a gsm service.they will fix it.If you are not a tech wizzard,then don't try to recover a hard brick phone home.there are alot of command lines to be written and the most slightest mistake will result in a permanent brick,beyond repair.You have 2 choices : send the phone to warranty,tell them it died.Go to a service and pay about 20 bucks to repair it.
[email protected]! said:
Plz help me unbrick my hard bricked phone
Click to expand...
Click to collapse
http://bbs.gfan.com/forum.php?mod=viewthread&tid=6269182&extra=page=1
starteam said:
http://bbs.gfan.com/forum.php?mod=viewthread&tid=6269182&extra=page=1
Click to expand...
Click to collapse
i read it but i cant understand it fully
plus its asking for money for downloading the files...............
can u eloborate it plz ?
write and explain in simple steps....
i am geting the error "image download failed cookie (if present) not received"
[email protected]! said:
i read it but i cant understand it fully
plus its asking for money for downloading the files...............
can u eloborate it plz ?
write and explain in simple steps....
i am geting the error "image download failed cookie (if present) not received"
Click to expand...
Click to collapse
if so,you can only use JTAG to repair it
starteam said:
if so,you can only use JTAG to repair it
Click to expand...
Click to collapse
No other way really ?:crying:
I am also facing cookie not received error on QPST. But my phone is Cherry Flare, qualcomm msm8225 based.
I had updated my phone to Jelly Bean (used it for 3 days) which died while it was charging. I tried to flash bootloader through QPST, but got the cookie error. I assume the QPST can solve the flash problem if something went wrong while updating firmware. In my case I was not updating the firmware, it suddenly died. After reading so many forums, I could not find any solution and am thinking that the phone is beyond repair by myself.
Now my question:
1. Can service center repair the phone through JTAG? I believe JTAG can directly access eMMC flash which QPST could not.
2. If not, can eMMC be replaced? Or the entire main board needs to be changed?
If the emmc is intact,jtag can fix it.
If the emmc buffer is corrupted or full with bad attempts to recover,the only way is to change the mainboard.
Happend to a friend with a galaxy note.he tried so many times to fix it with odin home until it was too late for jtag.it could't acces the emmc.
Anyway,if the phone is hard bricked,it can't be traced.so send it to warranty.
Sent from LG E975 pwd by CM 10.1
hey
long story short, i bricked my nitro hd by mistake while going back to stock (typo error in dd command) and i need some files from a working phone to attempt a last attempt to save it before i send it to Jtagging service.
there is a small program in this thread that will collect all the bootloaders i need (it needs root access)
if you're in windows you should run backup.bat from Brixfix-2-1.zip.
if you're in linux then you should run get-part.sh and getpartbin.py
thanks in advance
bobo122 said:
hey
long story short, i bricked my nitro hd by mistake while going back to stock (typo error in dd command) and i need some files from a working phone to attempt a last attempt to save it before i send it to Jtagging service.
there is a small program in this thread that will collect all the bootloaders i need (it needs root access)
if you're in windows you should run backup.bat from Brixfix-2-1.zip.
if you're in linux then you should run get-part.sh and getpartbin.py
thanks in advance
Click to expand...
Click to collapse
there are unbricking files posted in the unbricking threads...
KronicSkillz said:
there are unbricking files posted in the unbricking threads...
Click to expand...
Click to collapse
it doesnt have all the files i need (i mistakenly overwritten mmcblk0p2 when i was supposed to overwrite mmcblk0p27, i guess thats SBL1..
the little program in the thread i mentioned can bring me all the files i need (including SBLs and other files)
thanks for the reply though
If your phone is in unbooteable state, black screen, then you most probably need jtag. Describe the state of the phone.
Sent from my HTC One VX using xda premium
el_venga said:
If your phone is in unbooteable state, black screen, then you most probably need jtag. Describe the state of the phone.
Sent from my HTC One VX using xda premium
Click to expand...
Click to collapse
its black screen , and i was getting hsusb_qdload when connecting it to the computer (code 9008) , then i tried a chines program that flashes files to the emmc .. all i had was the su640 files (they were included in the same chines thread , p930 was mentioned there) ..
after the flash , its still black screen but now windows installs new drivers (code 9025) - check the attached photo.
as far as my understanding goes this is sd mode.. the flashing software is still able to see the cellphone, so i want to try to flash the original files this time and see what happens before i spend 80$ on jtagging
bobo122 said:
its black screen , and i was getting hsusb_qdload when connecting it to the computer (code 9008) , then i tried a chines program that flashes files to the emmc .. all i had was the su640 files (they were included in the same chines thread , p930 was mentioned there) ..
after the flash , its still black screen but now windows installs new drivers (code 9025) - check the attached photo.
as far as my understanding goes this is sd mode.. the flashing software is still able to see the cellphone, so i want to try to flash the original files this time and see what happens before i spend 80$ on jtagging
Click to expand...
Click to collapse
This is Qualcomm mode. Dunno why you got two different ids but I might give you the files in a day or two. I have a p930.
Sent from my HTC One VX using xda premium
el_venga said:
This is Qualcomm mode. Dunno why you got two different ids but I might give you the files in a day or two. I have a p930.
Sent from my HTC One VX using xda premium
Click to expand...
Click to collapse
great, thanks a lot
Mine bricked just now. Was testing a micro sdcard and afterwards just black screen and hsusb now. Did you repaired yours?
Sent from my LG-E970 using XDA Premium 4 mobile app
nope .. no luck ..
try this method
may this method works for you http://bbs.gfan.com/forum.php?mod=viewthread&tid=4520374&ordertype=1
all you need is correct files otherwise your phone will be totally dead even not jtagable
Hi guys...
my DHD is hard bricked and is not detected by any software except QPST (Qualcomm Product service Tool).... in eMMc software download it shows my phone in download mode....
i have seen some posts on the internet for repairing dead boot with qpst, i just need the firmware that is supported by this programme.... plz someone help me.....
QPST need .hex files.... i could`nt find them any where....
junaid.rajput said:
Hi guys...
my DHD is hard bricked and is not detected by any software except QPST (Qualcomm Product service Tool).... in eMMc software download it shows my phone in download mode....
i have seen some posts on the internet for repairing dead boot with qpst, i just need the firmware that is supported by this programme.... plz someone help me.....
QPST need .hex files.... i could`nt find them any where....
Click to expand...
Click to collapse
Forget it my brother. I had the same problem and I never found them. Those files are strictly released to Qualcomm developers only.
I would suggest u get another motherboard from a dhd and replace it with urs.
You can search eBay for DHDs with cracked screens for lower prices.
mickeyasamoah said:
Forget it my brother. I had the same problem and I never found them. Those files are strictly released to Qualcomm developers only.
I would suggest u get another motherboard from a dhd and replace it with urs.
You can search eBay for DHDs with cracked screens for lower prices.
Click to expand...
Click to collapse
Thanks for the response bro.... you have been very helpfull..
Is there any way to create that file.
ro1407 said:
Is there any way to create that file.
Click to expand...
Click to collapse
There were some tutorials, but even those methods needed certain files we couldn't find.
Sent from my XT912 using XDA Free mobile app
i flashed lg kernel on my m8 by wrong now the phone dosent turn on
or reboot via volume + power
and the pc recognize it as "QHSUSB_BULK"
ANY HELP
U have probably turned ur m8 into a paperweight ? only thing to do now is keep pressing power button and volume. Try through pc cmd - adb reboot-bootloader just to see . Sucks mate hopefully it works out for you
LG kernel.....seriously !!!
Mr Hofs said:
LG kernel.....seriously !!!
Click to expand...
Click to collapse
was mistake
any help ?
Mr Hofs said:
LG kernel.....seriously !!!
Click to expand...
Click to collapse
error |: device not found
As soulja already said. Boot the phone to the bootloader and recovery. Reflash a rom. If that is impossible to achieve there is absolutely nothing we can do.
Mr Hofs said:
As soulja already said. Boot the phone to the bootloader and recovery. Reflash a rom. If that is impossible to achieve there is absolutely nothing we can do.
Click to expand...
Click to collapse
it wont boot or respond even for charger
Then it's proper dead.....
Good try the Adb command Adb reboot bootloader see if you can get into that but might be tricky
Edit.... Just seen your last post hope you have insurance
Won't something like this work on that device, of course downloading the correct HTC One M8 equivalent files?
qhsusb_bulk detection lg g2 fix
what dongle i need for it ?
But if the device is not even switching on its a no go right ?
Mr Hofs said:
But if the device is not even switching on its a no go right ?
Click to expand...
Click to collapse
Yeah.
I can recall also reading something some time ago about making your SD Card(External) the bootable one and then fixing the "internal" from there but I'm not sure if that will even work either, was for another device as well.
I don't think a lot of developers/"hackers" on here sat down trying to figure out solutions to a problem that isn't so frequent on this device. I mean, who would flash a LG "anything" on an HTC...
Just wondered if it might work out seeing as it at least "detects" that much from the phone. It's a type of Qualcomm recovery mode isn't it, QHUSB-etc etc
Figured that maybe it is in a "semi" on condition already, it's just that you can't do anything with it. But if it's completely broke then might as well take it into service center for repair. Don't know what you're gonna tell them though @escoda
Yep. From what i know on the htc one x, once you turn off the phone completely (no hibernation mode) and you plug it in the pc it goes automatically to a adb hibernation mode. That's why its in the device manager. So it reads the device but can't respond correctly. But to get a step ahead it's very necessary to turn the device on.
@escoda its not completely bricked yet. Just go to ubuntu and follow the guide mentioned from Brendm14. Like he also said you only need to download then those files for the htc one m8. Most qualcomm devices have everything on the same partition but you could probably examine or the bootloader and the other required stuff are the same partition number as in the guide. If so then you still just need to download the htc files and do it the same.
I dont know where you can get the htc files since I am/was an LG user.
wulsic said:
@escoda its not completely bricked yet. Just go to ubuntu and follow the guide mentioned from Brendm14. Like he also said you only need to download then those files for the htc one m8. Most qualcomm devices have everything on the same partition but you could probably examine or the bootloader and the other required stuff are the same partition number as in the guide. If so then you still just need to download the htc files and do it the same.
I dont know where you can get the htc files since I am/was an LG user.
Click to expand...
Click to collapse
Those files are present on any firmware.zip for the appropriate phone model.
Flashing just a wrong kernel would not do that. Something must have happened that messed with the bootloader.
r3pwn said:
Flashing just a wrong kernel would not do that. Something must have happened that messed with the bootloader.
Click to expand...
Click to collapse
what can i do ??
its out of warranty
escoda said:
what can i do ??
its out of warranty
Click to expand...
Click to collapse
If you have an extra SDcard laying around, I would be happy to help you try to get your phone working (see posts above).
r3pwn said:
If you have an extra SDcard laying around, I would be happy to help you try to get your phone working (see posts above).
Click to expand...
Click to collapse
yes i have SDcard ...
i tried Ubuntu and when i write (ls /dev/sd*) it return with /dev/sda /dev/sda1 /dev/sda2 /dev/sda5
i've HTC Desire 820n Dead Boot
Pc Detect It As QHS-USB Bulk Only
any idea to repair it
any way to use QPST to repair it
if someone had solution
plz lead me
thanks
any one can help ????
A_1st said:
any one can help ????
Click to expand...
Click to collapse
Sorry to hear that bro..
Its possibly its a hard brick, you have to go to service center.
Searched it and found that it happened in past with some nexus/htc/lg device owners. They tried to repair it through flashing .img's to the respective partitions but ites not the case here since HTC did not provide any this kind of img files. So your best chance is to go to service center.
Did you got any solution for this ??
zakiyy said:
Did you got any solution for this ??
Click to expand...
Click to collapse
not yet brooo
Only box (u need visit service).
How did u enter QHS-USB mode with your phone?
http://bbs.gfan.com/android-8367961-1-1.html
http://www.androidbrick.com/ultimate-guide-qualcomm-snapdragon-xiaomi-mi5-imei-and-baseband-repair-fix/
this link might help you