Develop Bugs

[Q] Unbrick QHSUSB_DLOAD

Is there any progress on unbricking the htc one v, I've tried using the unlimited.io method with no luck, any help would be appreciated

in the word's of myself, your buggered....you need to send it to Repair centre..
1st hand experience here

Haha thought as much, ah well thanks anyway

or find someone with a riffbox, if its really DLOAD mode and not diagnostic then its ready for revival and wont even need cracking open (and youll get s-off/supercid too)

What's that ??

donhashem.dh said:
What's that ??
Click to expand...
Click to collapse
its a jtag box that supports several htc phones by usb you just have to short the emmc while connecting the usb to get into qcom dload mode, if youve already got dload mode you just need to connect to the riffbox and hit ressurect (and set your cid to 11111111 if you want) it will get you back to the bootloader with s-off and you can flash an ruu from there to revive it fully

Can we purchase that from stores ??
And if its hard bricked ......will it work ??

Emba4 said:
or find someone with a riffbox, if its really DLOAD mode and not diagnostic then its ready for revival and wont even need cracking open (and youll get s-off/supercid too)
Click to expand...
Click to collapse
not always, this problem shows for 2 things
1) ALL or some of the nand is broken due to radio and needs to go to HTC
2) as you said, IF it's just in DLOAD, and we have a program in the android development forum for it..

Btw if they take it to HTC what do they fix in it ??

motherboard ^
Sent from my One V

But how is hardware related with software ,if the bootloader got corrupted then why motherboard ??

Who said BL is corrupted the partitions get corrupt if I an not wrong
Sent from my One V using xda app-developers app

Bricked at&t LG

I've searched the whole thread and tried every method to unbrick my phone but my phone wont even go in to download mode the screen is black and blank Please help all this happened after trying to unlock.

Try to charge your phone from the wall. Any luck?
Sent from my LG-LS970 using xda premium

Ninja25 said:
Try to charge your phone from the wall. Any luck?
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
I tried no luck when I connected the phone to my computer it attempted to install this driver qhsusb_dload and failed.

Try going over to the AT&T thread.
See if this post has any helpful info...
http://forum.xda-developers.com/showthread.php?t=2006946
I think that post has info on accessing the irc channel...you can get the LGNPST files from there.
Good luck.
Sent from my Optimus G using xda premium

ur phone become a hard brick,install qualcomm's driver,will appear a...qualcomm xxx 9008,pls use QPST emmcswdownload repair it,ok
Sent from my SHV-E120L using xda premium

my phones hard bricked can u plz tell me how to unbrick it ?
starteam said:
ur phone become a hard brick,install qualcomm's driver,will appear a...qualcomm xxx 9008,pls use QPST emmcswdownload repair it,ok
Sent from my SHV-E120L using xda premium
Click to expand...
Click to collapse
Plz help me unbrick my hard bricked phone

I wouldn't recommend it. Please go to a gsm service.they will fix it.If you are not a tech wizzard,then don't try to recover a hard brick phone home.there are alot of command lines to be written and the most slightest mistake will result in a permanent brick,beyond repair.You have 2 choices : send the phone to warranty,tell them it died.Go to a service and pay about 20 bucks to repair it.

[email protected]! said:
Plz help me unbrick my hard bricked phone
Click to expand...
Click to collapse
http://bbs.gfan.com/forum.php?mod=viewthread&tid=6269182&extra=page=1

starteam said:
http://bbs.gfan.com/forum.php?mod=viewthread&tid=6269182&extra=page=1
Click to expand...
Click to collapse
i read it but i cant understand it fully
plus its asking for money for downloading the files...............
can u eloborate it plz ?
write and explain in simple steps....
i am geting the error "image download failed cookie (if present) not received"

[email protected]! said:
i read it but i cant understand it fully
plus its asking for money for downloading the files...............
can u eloborate it plz ?
write and explain in simple steps....
i am geting the error "image download failed cookie (if present) not received"
Click to expand...
Click to collapse
if so,you can only use JTAG to repair it

starteam said:
if so,you can only use JTAG to repair it
Click to expand...
Click to collapse
No other way really ?:crying:

I am also facing cookie not received error on QPST. But my phone is Cherry Flare, qualcomm msm8225 based.
I had updated my phone to Jelly Bean (used it for 3 days) which died while it was charging. I tried to flash bootloader through QPST, but got the cookie error. I assume the QPST can solve the flash problem if something went wrong while updating firmware. In my case I was not updating the firmware, it suddenly died. After reading so many forums, I could not find any solution and am thinking that the phone is beyond repair by myself.
Now my question:
1. Can service center repair the phone through JTAG? I believe JTAG can directly access eMMC flash which QPST could not.
2. If not, can eMMC be replaced? Or the entire main board needs to be changed?

If the emmc is intact,jtag can fix it.
If the emmc buffer is corrupted or full with bad attempts to recover,the only way is to change the mainboard.
Happend to a friend with a galaxy note.he tried so many times to fix it with odin home until it was too late for jtag.it could't acces the emmc.
Anyway,if the phone is hard bricked,it can't be traced.so send it to warranty.
Sent from LG E975 pwd by CM 10.1

i need some files from a working phone to try to unbrick mine

hey
long story short, i bricked my nitro hd by mistake while going back to stock (typo error in dd command) and i need some files from a working phone to attempt a last attempt to save it before i send it to Jtagging service.
there is a small program in this thread that will collect all the bootloaders i need (it needs root access)
if you're in windows you should run backup.bat from Brixfix-2-1.zip.
if you're in linux then you should run get-part.sh and getpartbin.py
thanks in advance

bobo122 said:
hey
long story short, i bricked my nitro hd by mistake while going back to stock (typo error in dd command) and i need some files from a working phone to attempt a last attempt to save it before i send it to Jtagging service.
there is a small program in this thread that will collect all the bootloaders i need (it needs root access)
if you're in windows you should run backup.bat from Brixfix-2-1.zip.
if you're in linux then you should run get-part.sh and getpartbin.py
thanks in advance
Click to expand...
Click to collapse
there are unbricking files posted in the unbricking threads...

KronicSkillz said:
there are unbricking files posted in the unbricking threads...
Click to expand...
Click to collapse
it doesnt have all the files i need (i mistakenly overwritten mmcblk0p2 when i was supposed to overwrite mmcblk0p27, i guess thats SBL1..
the little program in the thread i mentioned can bring me all the files i need (including SBLs and other files)
thanks for the reply though

If your phone is in unbooteable state, black screen, then you most probably need jtag. Describe the state of the phone.
Sent from my HTC One VX using xda premium

el_venga said:
If your phone is in unbooteable state, black screen, then you most probably need jtag. Describe the state of the phone.
Sent from my HTC One VX using xda premium
Click to expand...
Click to collapse
its black screen , and i was getting hsusb_qdload when connecting it to the computer (code 9008) , then i tried a chines program that flashes files to the emmc .. all i had was the su640 files (they were included in the same chines thread , p930 was mentioned there) ..
after the flash , its still black screen but now windows installs new drivers (code 9025) - check the attached photo.
as far as my understanding goes this is sd mode.. the flashing software is still able to see the cellphone, so i want to try to flash the original files this time and see what happens before i spend 80$ on jtagging

bobo122 said:
its black screen , and i was getting hsusb_qdload when connecting it to the computer (code 9008) , then i tried a chines program that flashes files to the emmc .. all i had was the su640 files (they were included in the same chines thread , p930 was mentioned there) ..
after the flash , its still black screen but now windows installs new drivers (code 9025) - check the attached photo.
as far as my understanding goes this is sd mode.. the flashing software is still able to see the cellphone, so i want to try to flash the original files this time and see what happens before i spend 80$ on jtagging
Click to expand...
Click to collapse
This is Qualcomm mode. Dunno why you got two different ids but I might give you the files in a day or two. I have a p930.
Sent from my HTC One VX using xda premium

el_venga said:
This is Qualcomm mode. Dunno why you got two different ids but I might give you the files in a day or two. I have a p930.
Sent from my HTC One VX using xda premium
Click to expand...
Click to collapse
great, thanks a lot

Mine bricked just now. Was testing a micro sdcard and afterwards just black screen and hsusb now. Did you repaired yours?
Sent from my LG-E970 using XDA Premium 4 mobile app

nope .. no luck ..

try this method
may this method works for you http://bbs.gfan.com/forum.php?mod=viewthread&tid=4520374&ordertype=1
all you need is correct files otherwise your phone will be totally dead even not jtagable

Desire 820n Dead Boot (Help)

i've HTC Desire 820n Dead Boot
Pc Detect It As QHS-USB Bulk Only
any idea to repair it
any way to use QPST to repair it
if someone had solution
plz lead me
thanks

any one can help ????

A_1st said:
any one can help ????
Click to expand...
Click to collapse
Sorry to hear that bro..
Its possibly its a hard brick, you have to go to service center.
Searched it and found that it happened in past with some nexus/htc/lg device owners. They tried to repair it through flashing .img's to the respective partitions but ites not the case here since HTC did not provide any this kind of img files. So your best chance is to go to service center.

Did you got any solution for this ??

zakiyy said:
Did you got any solution for this ??
Click to expand...
Click to collapse
not yet brooo

Only box (u need visit service).

How did u enter QHS-USB mode with your phone?
http://bbs.gfan.com/android-8367961-1-1.html
http://www.androidbrick.com/ultimate-guide-qualcomm-snapdragon-xiaomi-mi5-imei-and-baseband-repair-fix/
this link might help you

Hard Bricked RedMagic 5G

So i have recently bought a red magic 5g from Aliexpress. Thanks to xda i have rooted it successfully but by mistake, I have updated the phone and now the phone is bricked. I have used Jerry's tool to unbrick it but that didn't work, I have disassembled the phone for edl but still no hopes.
I think my phone is Chinese so I need Chinese unbrick tool. Can anyone help me with this?

arjun_m4 said:
So i have recently bought a red magic 5g from Aliexpress. Thanks to xda i have rooted it successfully but by mistake, I have updated the phone and now the phone is bricked. I have used Jerry's tool to unbrick it but that didn't work, I have disassembled the phone for edl but still no hopes.
I think my phone is Chinese so I need Chinese unbrick tool. Can anyone help me with this?
Click to expand...
Click to collapse
Chinese and global have same tool and same chip and people have succeeded to unbrick chinese ones with this tool. But generally the issue is the usb port/computer/usb cable. You dont have to open your phone.. Just continue to try other computers..but before everything i would suggest you to check if your phone is actually hard bricked or have you put it to edl mode etc.. But you can be sure ...there is johnny tool and jerry tool and they both work.there is nothing else
Sent from my LM-G850 using Tapatalk

Thanks but i have tried both the tools and that didn't help at all. The device doest boot and just connects to the pc using HS-USB QDLoader 9008 protocol.

arjun_m4 said:
Thanks but i have tried both the tools and that didn't help at all. The device doest boot and just connects to the pc using HS-USB QDLoader 9008 protocol.
Click to expand...
Click to collapse
Ok... Then try to continue to change pc , cable, usb port until it works.there is no other option. These tool are too much picky about these 3 things.
Sent from my LM-G850 using Tapatalk

i have tested it on 3 pc's. Jerry's tool seems stuck at Downloading Software image... and jhonny's tools gives me ack count error.

arjun_m4 said:
i have tested it on 3 pc's. Jerry's tool seems stuck at Downloading Software image... and jhonny's tools gives me ack count error.
Click to expand...
Click to collapse
Ok then contact the telegram people. Cant share link.sorry
Sent from my LM-G850 using Tapatalk

Thanks. Is it possible i can have your telegram id so I can contact you regarding this issue ?

arjun_m4 said:
Thanks. Is it possible i can have your telegram id so I can contact you regarding this issue ?
Click to expand...
Click to collapse
Sorry i changed device so i am not even active in that group or anything related to the phone..i saw you searching for chinese tool..so i answered. That group is available in a lot of place and they are very helpful..check with them..sorry couldn't help
Sent from my LM-G850 using Tapatalk