I deleted my OS and cleared my SD card. Now I have no OS to reboot from and im stuck at the HTC logo. I tried opening through TRWP and finding a zip to install but i cleared everything. Any way around this?
Connect to your computer, mount USB storage in TWRP and copy a rom to flash
Did you search at all ?
Well then here we go :
Can you mount USB in recovery ( I know the latest cmw can )
If yes just move the rom to the phone sd and flash it again. With or without a full wipe ...that's your choice ....
If it's exactly the same rom with the stock kernel of that rom a full wipe is NOT necessary.
If you want to try another rom you have to flash the boot.img and then flash the rom WITH full wipe !
If you can't mount your phone as a USB drive in recovery i suggest you flash the latest cmw recovery. ( I don't know your recovery as I never used it)
Verstuurd van mijn HTC One X
I'm using TWRP and I have a ROM now in my /sdcard. Problem is when I try to wipe the cache, Davik Cache wipe keeps failing.
Related
So back on my Evo 4G whenever I wanted to flash a new rom, I would load it on my SD card. Then boot into custom recovery and wipe cache/Dalvik... Then would wipe ALL data/factory reset. Then I would install my new rom off of my SD card.
With my S3, I cannot access anything on my SD via CWM recovery. I have a SDXC card formatted to FAT32 and am on Blazer 1.8
I want to do a full data wipe before flashing new ROMS, but I am worried that if I do, I won't have a way of getting a zip file back on my phone after doing so.
It ALMOST seems like. Remember being able to access my SD in CWM when I was on a stock rooted rom. But I'm not positive.
How does one do a wipe data option in CWM and then get a flash able zip back on the phone afterwards if the SD card is not available to see and move data to/from?
I don'tanna end up wiping all data and then finding out that I hav no way of installing/restoring a rom.
Thanks!
iomega311 said:
So back on my Evo 4G whenever I wanted to flash a new rom, I would load it on my SD card. Then boot into custom recovery and wipe cache/Dalvik... Then would wipe ALL data/factory reset. Then I would install my new rom off of my SD card.
With my S3, I cannot access anything on my SD via CWM recovery. I have a SDXC card formatted to FAT32 and am on Blazer 1.8
I want to do a full data wipe before flashing new ROMS, but I am worried that if I do, I won't have a way of getting a zip file back on my phone after doing so.
It ALMOST seems like. Remember being able to access my SD in CWM when I was on a stock rooted rom. But I'm not positive.
How does one do a wipe data option in CWM and then get a flash able zip back on the phone afterwards if the SD card is not available to see and move data to/from?
I don'tanna end up wiping all data and then finding out that I hav no way of installing/restoring a rom.
Thanks!
Click to expand...
Click to collapse
Move on to TWRP for your recovery, much more features but if you don't want to do that go to CWM's website and update to 6.0 it will allow you to "see" your sd card
evoer said:
Move on to TWRP for your recovery, much more features but if you don't want to do that go to CWM's website and update to 6.0 it will allow you to "see" your sd card
Click to expand...
Click to collapse
+1 on TWRP, much nicer and more features and themable To install, download GooManager open it and grant SU access then tap menu and select "Install OpenRecoveryScript" and it'll do the rest.
BTW you're following the process ok, except you're doing one additional step that is not required that is to wipe cache and dalvik. When you factory reset you're deleting the data partition which also has both cache. It should be wipe system then do factory reset, flash the ROM after that and you should be all set.
Install stock JB LS8 after wipe
I got info on how to wipe the phone using CW mode. It does explain to format boot and system partition and ask to reboot. (http://forum.xda-developers.com/showthread.php?t=1410881)I was left in confusion. If boot is formatted, would CW mode work after reboot ? After full wipe, can I get GT-I9100 in download mode and do stock rom installation using ODIN ? Thanks in advance.
keyur1401 said:
I got info on how to wipe the phone using CW mode. It does explain to format boot and system partition and ask to reboot. (http://forum.xda-developers.com/showthread.php?t=1410881)I was left in confusion. If boot is formatted, would CW mode work after reboot ? After full wipe, can I get GT-I9100 in download mode and do stock rom installation using ODIN ? Thanks in advance.
Click to expand...
Click to collapse
Formatting Boot will not affect CWM. CWM is your receovery not your boot. Also after a full wipe you should be able to get into download mode to flash via ODIN.
Install TWRP or update CWM, one version of CWM had a bug and don't let you access the sdcard.
If you choose TWRP, in the Format Menu, DO NOT use "Format Data" Second Row/Right Option. It will delete your data on the internal storage.
Sent from my morphed O=O
Make sure you have the most recent version of CWM. I can access both internal and external storage. It's downloadable from the ClockworkMod app.
Hello all,
I unlocked my phone and rooted it. I tried to instal miui ROM, succesful but my phone got stuck at the HTC intro screen. Eventually, nothing worked like whiping cache etc. So i completely recovered my phone from backup (clockwork) from before unlocking and rooting. NOTHING, it just kept hanging at the HTC intro screen. After that i could not find any solutions online and i completely formatted the SD out of despare
Now everything is gone, backup and folders on the SD, EVERYTHING.
I can still go to the HBOOT menu and Recovery menu. My computer does find HTC device.
Can anybody help??
hi
use this, will work 100 %
http ://miuiandroid.com/community/threads/installing-the-htc-one-x-required-s-on-steps.16592/
Enter the recovery and mount the sdcard as an usb mass storage device, copy the rom.zip to the phone and copy the boot.img file from inside the rom.zip to the fastboot folder on the pc. Then you put the phone in the bootloader and flash the boot.img file with fastboot commands, enter recovery and perform a full wipe (except sdcard ofcourse) ....wipe data,system,cache,dalvik cache !
Then install the rom.zip and reboot
If u can go to recovery, use mount usb storage to connect to pc and put your custom rom in sd. Unmount and put in bootloader and flash the boot.img first and then go to recovery again and flash your rom.
Talking about help !
HTC One X SD completely wiped clean
hardcore4ever said:
If u can go to recovery, use mount usb storage to connect to pc and put your custom rom in sd. Unmount and put in bootloader and flash the boot.img first and then go to recovery again and flash your rom.
Click to expand...
Click to collapse
Thanks for all the (quick) responses!
In recovery:
When i choose mount SD card, nothing happens, when i choose mount USB storage, i get an error E:unable to open ums lunfile (no such file or directory).
My computer only finds my HTC in devicemanagement when i get to the HBoot menu.
Help?
BRBullet said:
Thanks for all the (quick) responses!
In recovery:
When i choose mount SD card, nothing happens, when i choose mount USB storage, i get an error E:unable to open ums lunfile (no such file or directory).
My computer only finds my HTC in devicemanagement when i get to the HBoot menu.
Help?
Click to expand...
Click to collapse
What recovery are you using. Try flashing the latest twrp and try to mount as usb storage.
Yeah its an old one
http://db.tt/Krlm4dPs
Flash this one first and try again
HTC One X SD completely wiped clean
BIG THANKS!!
My PC has found SD card now after flashing recovery v5.8.4.0! i will try to install a rom.
Don't forget the boot.img you have to flash !
HTC One X SD completely wiped clean
Mr Hofs said:
Don't forget the boot.img you have to flash !
Click to expand...
Click to collapse
Thanks! i installed ordroid ROM and flashed the ordroid boot img afterwards. Its all working fine now.
Thank you all for the great support! :good:
Nice !
CASE CLOSED !
Hello Everyone,
As the title says I have successfully wiped my phone and all of my backups =) ..
In ClockworkMod recovery v6.0.4.3 I originally installed
http://forum.xda-developers.com/showthread.php?t=2687429
and..
http://forum.xda-developers.com/showthread.php?t=2692470
There was a weird rectangular red box that kept popping up and I was trying to re install the RR mod with the fix.
Welp I..
Wipe data/Factory reset
Wipe cache partition
Wipe Delvic cache
Format /data
annnd.. Format /data and /data/media pretty much wiping my backups and roms on my phone.
My phone now hangs at the att Logo.
Things I have tried:
Flashing roms and kernels using odin.
sideloading using clockwork: (My PC does not recognize the device to sideload) I am assuming because there is no rom? ..because i wiped it. =(
Is there any way to access the filesystem on my phone from my pc with clockwork recovery to add roms/ kernels to install? While installing the majedtic kernel or the Res rom mod did i put my phone in an irreversible state? Can I get into a stock rom or custom rom? ( any will do at this point) Any other suggestions?
Current state:
I can get to the download mode. I can get to the Clockwork recovery screen. I cannot connect via sideload. I hang at the attt screen.
Thanks for the halp!
In download mode, you can install Philz Touch custom recovery via Odin.
Copy a ROM to an SD card. After flashing Philz, boot into recovery and install the ROM from the SD card.
HI everyone.
i have just installed the new DN3 v5 rom. my previous was an omega v27 so an 4.3 android based rom and before the flash i have do all the wipe for a clean install: system,data,cache,dalvik. now my phone won't start with the rom, it start directly in TWRP(2.7.0.2) without load the rom. any solution?
sorry for bad english.
thx
Thepunisherg4 said:
HI everyone.
i have just installed the new DN3 v5 rom. my previous was an omega v27 so an 4.3 android based rom and before the flash i have do all the wipe for a clean install: system,data,cache,dalvik. now my phone won't start with the rom, it start directly in TWRP(2.7.0.2) without load the rom. any solution?
sorry for bad english.
thx
Click to expand...
Click to collapse
Did you try rebooting from within the recovery menu "reboot system"? If that doesn't help just reflash v5 again since you can access recovery.Good luck
singhpratik87 said:
Did you try rebooting from within the recovery menu "reboot system"? If that doesn't help just reflash v5 again since you can access recovery.Good luck
Click to expand...
Click to collapse
Yes i've already tried, i've also try to reflash the Rom several time but nothing. The only thing i can do is to go in recovery. The Rom wuoldn't boot up. Help me please.
Thepunisherg4 said:
Yes i've already tried, i've also try to reflash the Rom several time but nothing. The only thing i can do is to go in recovery. The Rom wuoldn't boot up. Help me please.
Click to expand...
Click to collapse
Sometimes the recovery refuses to flash the ROM correctly so one needs to switch recovery so i'll link you up with philz 6.25.0 just flash that recovery using your existing twrp recovery and then "reboot recovery" from within the twrp menu now it will bring up your new philz recovery up. (place the zip file of philz touch in your sd card via card reader)
Go to this http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100 scroll down and download 6.25.0 or 6.26.0 .zip file and follow the above steps.If you need help on how to wipe your phone using philz follow this guide below
Go to mounts and storage and click on format/system, format/cache, format/preload , format/data and format/data and data/media (/sdcard)<--- this will format your internal storage,so back up if you have anything saved on it..NOTE: Do NOT format storage/sdcard1 cause this is your external sd card if you accidentally do format it you will lose all the contents on your sd card.If you still want to format your external sd card by this way make sure you have a card reader handy to be able to transfer the downloaded ROM and other contents on your sd card.
Now go back to main menu and click on advanced menu and wipe dalvik cache ,once again go back to main menu and click on wipe cache partition and go ahead and wipe it.At the very end go back to main menu and click on wipe data/factory reset and choose Clean to install a New ROM.Done.You have successfully performed all the wipes.Now you can go ahead and flash the ROM.
Now once you have succesfully flashed your rom and it boots up and you set up your phone,you can always switch back to twrp ,Good luck
singhpratik87 said:
Sometimes the recovery refuses to flash the ROM correctly so one needs to switch recovery so i'll link you up with philz 6.25.0 just flash that recovery using your existing twrp recovery and then "reboot recovery" from within the twrp menu now it will bring up your new philz recovery up. (place the zip file of philz touch in your sd card via card reader)
Go to this http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100 scroll down and download 6.25.0 or 6.26.0 .zip file and follow the above steps.If you need help on how to wipe your phone using philz follow this guide below
Go to mounts and storage and click on format/system, format/cache, format/preload , format/data and format/data and data/media (/sdcard)<--- this will format your internal storage,so back up if you have anything saved on it..NOTE: Do NOT format storage/sdcard1 cause this is your external sd card if you accidentally do format it you will lose all the contents on your sd card.If you still want to format your external sd card by this way make sure you have a card reader handy to be able to transfer the downloaded ROM and other contents on your sd card.
Now go back to main menu and click on advanced menu and wipe dalvik cache ,once again go back to main menu and click on wipe cache partition and go ahead and wipe it.At the very end go back to main menu and click on wipe data/factory reset and choose Clean to install a New ROM.Done.You have successfully performed all the wipes.Now you can go ahead and flash the ROM.
Now once you have succesfully flashed your rom and it boots up and you set up your phone,you can always switch back to twrp ,Good luck
Click to expand...
Click to collapse
nothing...stil boot into recovery.. :crying:
Thepunisherg4 said:
nothing...stil boot into recovery.. :crying:
Click to expand...
Click to collapse
Can you flash your omega v27 rom again?Or even that doesn't boot up?
Do you have stock 4.3 ROM? Flash that via ODIN and re root your phone and do the steps again
singhpratik87 said:
Can you flash your omega v27 rom again?Or even that doesn't boot up?
Do you have stock 4.3 ROM? Flash that via ODIN and re root your phone and do the steps again
Click to expand...
Click to collapse
just tried:
-install official 4.4.2 XXUFND3, reroot, get TWRP and flash....nothing
-install official 4.3 .........MK9, reroot, get twrp(switched also to philz) and flash...nothing
it always brings me back in recovery...
EDIT: just for security i've just flashed the last omni rom and it boots up, so i think its a rom's problem, any suggestion?
If u facing problem stuck at mi logo after installing xposed framework or after rebooting.
Don't worry I have a solution. Download philz touch recovery and paste in root of your SD card. Go to your cwm recovery nothing others and wipe data, cache, dalvic cache. And go to install zip from SD card > apply SD card update.zip and reboot recovery. You are in philz touch recovery go to wipe section and click on clean to install a new ROM. Install u r ROM. After reboot your system. Back in recovery and go to wipe section find there " format data and data/media" reboot u r system now. Install xposed and anything do you want. Happy flashing. Thank you.