Sorry beginners, this is for advanced users If you want, i can record video
!!!WARNING!!! In this phone is VIRUS! Please uninstall app eyuSales_blabla.apk!!!
A) Download my archive (186,4MB)
mega.co.nz/#!vdd1XRQb!Udy-BRprb8uw_c5HHVzusiEtoKkmOVLv36n_uxISeks
- Original ROM
- Custom ROM
- Drivers
- Flashing Tools
- Tools to edit ROM
B) Install any ROM
1. Power OFF you Phone
2. Start ChannelServer.exe from folder Server
3. Start ResearchDownload.exe from folder Flasher
4. Click to Load packet and then Start Downloading
5. Press volume down button and connect to PC. Instal Drivers, many drivers... (Win8 64bit sign problem - Settings, Computer Setting, General, Restart Now, disable sign check)
6. Finally flashing
7. Disconnect from PC, unplug Battery, plug Battery and Power ON!
C) Install part of ROM
1. Load original packet
2. Click to Settings butt
3. Select parts of ROM, ok and Start Downloading
4. Volume down, connect PC, flashing....
D) Edit ROM
1. Open ResearchDownload.exe, Load packet, Setting - find location system.img
2. Open Yaffey and open system.img
3. You can delete or add (import):
- bootanimation
- fonts
- sounds
- delete apps (for advaced users)
- add apps (import app to system/apps, then open app in WinRar, go to /lib/armeabi and copy this files to system/lib)
- manual ROOT - open root.zip and copy superuser.apk to system/app and copy "su" to system/bin. Right Click on "su", properties - check all checkboxes
4. Save as... and flash
E) Only ROOT
1. Flash recovery.img
2. Power, wait sec, volume down, wait sec, release power, wait sec, release volume down, wait...
3. You are in CWM Recovery - install root.zip from SD card
thank for post!
Not entirely working on device with 6820_2.35_C909_hteng_S2_RU_dt6206-V01
Hello,
I have this same phone, with 6820_2.35_C909_hteng_S2_RU_dt6206-V01.
Thanks to your post and also http://forum.xda-developers.com/showthread.php?t=2165554 I was able to get drivers working & flashing going.
However, this recovery.img and also all the ones from http://forum.xda-developers.com/showthread.php?t=2165554 result in a blank screen.
Does anyone have a working recovery for this version?
Problem
I have a problem!!!flashing is sucessful but when i on the phone,the screen inverted and i dont know what to do!!plss help!!
Hello there,
I have a simple question, I'm sure most of you developers know how to help us all.
I have a NST not rooted (I don't really need for mods and stuff) but I would like to get rid of the manual and the quick start guide that really annoys me.
Is it possibile to create a zip (maybe an img would be even better) that starts ClockworkmodRecovery and then that includes a flashable zip that deletes the 2 epubs?
So that everyone can delete them once and for all. :laugh:
Let me know if I can help you.
Perhaps it would be better to download and install a root explorer (such as ES File Explorer) and use it to browse and delete these epub files.
Sent from my Nexus 7 using Tapatalk 4 Beta
mikey242 said:
Perhaps it would be better to download and install a root explorer (such as ES File Explorer) and use it to browse and delete these epub files.
Sent from my Nexus 7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
well, that includes rooting, installing a launcher, installing a program...
i thought that a zip that does it without rooting and without anything permanent on the device would be better.
borzowsky said:
well, that includes rooting, installing a launcher, installing a program...
i thought that a zip that does it without rooting and without anything permanent on the device would be better.
Click to expand...
Click to collapse
I make what you asked for, find it enclosed. It is a zip update for CWM. I guess you know how to proceed but I've left instructions below for those who face this issue for first time:
1. Make a backup of your NST with noogie following this instructions.
2. Download the file enclosed within this post.
3. Burn 2gb_clockwork-rc2.img file to be written on a SD-Card using Win32DiskImager or dd on linux.
4. Open the SD-Card (where you burn 2gb_clockwork-rc2.img) and copy the DeletingEpubGuides.zip on the SD-Card.
5. Power down and insert the SD-Card on the NST.
6. Press the power button for 3 seconds, so that the device boots (you don't have to hold the power button after the 3 seconds)
7. As soon as the display changes to the "CWM logo" screen, push and hold the lower left and the lower right button until the screen changes again. Wait until you see the recovery. Hence, you'll be already booted into Clockworkmod recovery (Button layout: Both Buttons on the left: BACK / Upper button on the right: UP / Lower button on the right: DOWN / n button: SELECT / Power button: TOGGLE DISPLAY).
8. Install through CWM recovery the DeletingEpubGuides.zip update placed on the SD-Card. When you'll read "Done" press power button during 10 second and eject the SD-card.
9. Press power button to turn on the nook to let the devices open commonly.
I've just tested it over my NST v1.1.2 and works without problem.
Best.
kuskro said:
I make what you asked for, find it enclosed. It is a zip update for CWM. I guess you know how to proceed but I've left instructions below for those who face this issue for first time:
1. Make a backup of your NST with noogie following this instructions.
2. Download the file enclosed within this post.
3. Burn 2gb_clockwork-rc2.img file to be written on a SD-Card using Win32DiskImager or dd on linux.
4. Open the SD-Card (where you burn 2gb_clockwork-rc2.img) and copy the DeletingEpubGuides.zip on the SD-Card.
5. Power down and insert the SD-Card on the NST.
6. Press the power button for 3 seconds, so that the device boots (you don't have to hold the power button after the 3 seconds)
7. As soon as the display changes to the "CWM logo" screen, push and hold the lower left and the lower right button until the screen changes again. Wait until you see the recovery. Hence, you'll be already booted into Clockworkmod recovery (Button layout: Both Buttons on the left: BACK / Upper button on the right: UP / Lower button on the right: DOWN / n button: SELECT / Power button: TOGGLE DISPLAY).
8. Install through CWM recovery the DeletingEpubGuides.zip update placed on the SD-Card. When you'll read "Done" press power button during 10 second and eject the SD-card.
9. Press power button to turn on the nook to let the devices open commonly.
I've just tested it over my NST v1.1.2 and works without problem.
Best.
Click to expand...
Click to collapse
thank you very much, is it working on 1.2.1?
what is the path of the files that are deleted?
borzowsky said:
thank you very much, is it working on 1.2.1?
what is the path of the files that are deleted?
Click to expand...
Click to collapse
/system/media/books/
Success! (1.2.1)
borzowsky said:
thank you very much, is it working on 1.2.1?
what is the path of the files that are deleted?
Click to expand...
Click to collapse
I'm running 1.2.1, and I found them at /system/assets/userguides/standard/ . (There's also a /glowlight/ folder in the /userguides/ directory, FWIW.)
EDIT: However, deleting them there doesn't seem to remove them from the library. And I can't find the /system/media/books folder. Hmmm...
EDIT AGAIN: Also found them in /data/cloud_assets/books/userguides . Deleting, rebooting, and will report back here if that did it.
LAST EDIT I SWEAR: SUCCESS! Deleting them from all the locations listed above made them vanish from the library.
This tutorial will show you how to flash CM10.2 on the Sprint GS3 in just 10 easy steps! Follow the steps and make sure to check the video out as well!! ENJOY!!!!!!!!!!!!!!!!
*****CREDIT GOES TO MR. STRUCK FOR THE INFORMATION GIVEN*******
Link to video tutorial
- http://www.youtube.com/watch?v=z09Vk9Wq9vU
STEP 1
You must first root your phone to get Philz Touch Recovery 6.
Link to Root
- forum.xda-developers.com/showthread.php?t=2596697
STEP 2
Once you have rooted your device and have successfully gotten Philz recovery on your device you must make a nandroid backup. After the back up has been completed, you must download both the rom and gapps.*******I RECOMMEND DOWNLOADING BOTH FILES TO DESKTOP FOR EASY ACCESS******
Link to ROM
- http://download.cyanogenmod.org/get/jenkins/49849/cm-10.2.0-d2spr.zip
Link to GAPPS
- http://goo.im/gapps/gapps-jb-20130813-signed.zip
STEP 3
Once you have downloaded both the rom and gapps you must download WINRAR to view the files inside the zipped folder. Any zip manager will work but heres a link to the Full Free winrar download.
Link to WINRAR
- http://www.mediafire.com/download/v...4.20.2.0_64-bit_full_setup++ComputerWizHD.exe
STEP 4
After you have installed WINRAR you must next download NOTEPAD++ to edit the rom files.
Link to NOTEPAD++
- http://notepad-plus-plus.org/
STEP 5
Once NOTEPAD++ has been downloaded you must navigate to where the rom file was downloaded. Once you have found the zipped rom file, open it with WINRAR and navigate to: /META-INF/com/google/android and open the updater-script file with NOTEPAD++
STEP 6
Once the updater-script file is open you must highlight all the lines above: mount("ext4", "EMMC", "/dev/block/platform/msm_sdcc.1/by-name/system", "/system"); This line should be number 10. Delete everything above it making this line number 1.
STEP 7
After you have deleted all of the unnecessary lines close out of NOTEPAD++ and click yes on the prompt. WINRAR will to bring up a prompt, just simply select yes and drag both the ROM and GAPPS to your internal/external storage.
STEP 8
After both files have been placed into either the internal or external storage, power off your phone and enter recovery mode. To access recovery mode you must press and hold volume up first, home button second, then power button until blue text appears on the upper left hand corner of the screen.
STEP 9
****You should have already performed a nandroid back up before proceeding. If not please do so now!!****
After recovery has booted navigate to wipe data/factory reset to prepare the device for a new rom. After the factory wipe has been completed you MUST navigate to the advanced option and select wipe dalvik cache. Once that has been completed, navigate to install zip to locate the rom file and gapps file. You must flash the rom file first before the gapps file to prevent damage to the phone. After the rom file has been flashed continue with flashing the gapps.
STEP 10
After the rom and gapps files have been flashed you may reboot the system and continue with the setup of the device.
IF THIS TUTORIAL HELPED PLEASE LEAVE A LIKE AND IF YOU HAVE ENCOUNTERED ANY ISSUES PLEASE POST A COMMENT OR PM ME FOR FURTHER ASSISTANCE THANKS!!
Um, my first first?
Stupid Tapatalk isn't letting me thank the first post. Okay, now it finally did.
Sent from my SPH-L710 using Tapatalk
roirraW "edor" ehT said:
Um, my first first?
Stupid Tapatalk isn't letting me thank the first post. Okay, now it finally did.
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
Lol what do you mean "..my first first?"
WoodenDiamond71 said:
Lol what do you mean "..my first first?"
Click to expand...
Click to collapse
I don't recall ever being the first to respond to a kindof ROM posting before. Either that or it was so long ago I don't remember. Sorry for the OT.
Sent from my SPH-L710 using Tapatalk
Oh. Its cool I appreciate the response though so thank you.
Sent from my SPH-L710 using Tapatalk
Hi, yesterday I bricked my Galaxy A10s by flashing a custom recovery by Odin (The phone doesn't enter in Download or recovery modes, it just does nothing):
Immediately I started looking for how to fix it, and after a lot of research, here is how to:
REQUIREMENTS
Windows 10 x64 bit PC with Internet Connection (may work on Win7/8).
A USB Cable
Scatter firmware:
For SM-A107M Binary5: https://www.androidfilehost.com/?fid=7161016148664790627
For SM-A107F Binary8: https://www.androidfilehost.com/?fid=7161016148664790683
PROCESS1- Download this file and decompress it using 7Zip or WinRAR. then open the folder: https://www.androidfilehost.com/?fid=7161016148664790681
2- Python3 installation: open the python installer. Mark the "ADD Pyhton 3.9 TO PATH" option: https://i.imgur.com/9hxjD5p.jpg
Then click "Install Now". When finished click close. Open a cmd (write cmd in Windows Start Menu and open it) and paste this comand:
pip install pyusb pyserial json5If all its okay, you must see something like this:
https://imgur.com/YdHQgk2
If not, uninstall all versions of python you have installed and reinstall the provided one, remember to check the "Add to PATH".
3- MTK Driver: open the "MediaTek SP Drivers v2.0 signed" folder, then open Android, do a right click over "android_winusb.inf" and click install. Go back and open "CDC" folder. Right click "cdc-acm.inf" and press install. In both cases, it will say "Installation successfully".
4- Decompress the scatter firmware provided at the first of the post. If you wanna make one, because you have another model or binary, see the next post.
5- Prepair SP Flash Tool: open the "SP_Flash_Tool" folder and execute "flash_tool.exe" as Administrator.
Click "Choose" button in the Scatter-Loading file line and search the folder where you decompressed the Scatter Firmware. Open the file "MT6765_Android_scatter.txt". https://i.imgur.com/BLYlaSX.jpg
Make sure the option below "Authentication File" is "Download Only". If not, select it from the list.
Now, go to "Options" > "Option..." and unmark these 3.
Go to connection and put all like the photo:
Done, now we have SP Flash Tool ready.
5- Connect your Galaxy A10s to your computer. Your phone its cycling rebooting itself, entering into preloader mode for 2 seconds, every 10-15 seconds.
Now install "libusb-win32-devel-filter-1.2.6.0.exe" and click finish to open it. Select "Install a device filter" and click next. A list will appears, so wait for your Phone to enter into Preloader. It will appear in the list (as Preloader USB VCOM Port), so rapidly select it and then click "Install". https://i.imgur.com/Kzv3lkD.jpg
If it appears, all is okay, if not, repeat this step. Don't close the program after do this.
6- With this done, open the "bypass_utility-v.1.4.2" folder. In the keyboard, press "Shift" (the key with a up pointed arrow, below enter) and without releasing it, right click inside the folder. In the menú, click "Open Power Shell here".
Now, write this and press enter:
python main.pyIf this command does nothing, try with this variant: py -3 main.py
Now, wait for the phone reboot again in preloader. This time, the script will make the phone keep in the Preloader, and the PowerShell will tell you that an error was ocurred. https://i.imgur.com/ZCsRmtN.jpg
So, open libusb-win32 program from the taskbar and search for "Mediatek USB Port". Select it and press next, to install the device filter for it.
https://imgur.com/ouu6u2c
7- Maximize Power Shell and write this command again:
Code:
python main.py
(or py -3 main.py)
NOTE: If PowerShell it's stuck on "waiting for the device" for more than 2 minutes, press Power, vol+, and vol- buttons at the same time for 7 to 15 seconds to force a reboot.
This time, the log will tell you "[2021-08-21 13:28:01.303625] Protection disabled". https://i.imgur.com/2avTTNi.jpg
Plz, don't disconnect the phone.
8- Go back to SP Flash Tool program and click in the "Download" button and it will start to flash your phone. https://i.imgur.com/iknxeUE.jpg
https://imgur.com/huHh7tz
9- When finished, you will see a green tick and your phone will disconnect from the computer. Now, press the power and volume down (-) buttons at the same time, and keep it until you see the Download Mode.
https://imgur.com/Bi4AITN
10- Now, flash the last Firmware for your phone using Odin. Exists a lot of tutorials on Google and YouTube for it, so i will leave you to search one.
11- Done! Your phone its alive again.
Thanks to fromgodd & Dego09 for helping me, without them, this tutorial wasn't possibleMy english isn't perfect. You can tell me any corrections. Thanks in advance.
How to make a Scatter Firmware for your Galaxy A10sREQUIREMENTS- Last version of 7Zip ZStandard. Download it from the releases and install: https://github.com/mcmilk/7-Zip-zstd/releases
- A firmware that match with your phone binary. If you dont know, use the last one. You can download it from various sites, but i recommend to use SamFW.com. You need to decompress the firmware to get the 5 files needed.
PROCESS1- Create a new folder and place this file in: https://www.androidfilehost.com/?fid=7161016148664790665
2- Now, go where you downloaded the firmware. Right click on the AP File and click "7Zip ZS" option and select "Open Archive" (first option).
3- We will open file by file, and then we will drag the content of each one inside to the folder with the scatter.txt file. Repeat it with AP, BL, CP and CSC Firmware files (HOME_CSC isn't used).
The result will be like this:
https://imgur.com/wcHVfop
3- Now go to "View" tab in the Windows Explorer, and then tick "File Name Extensions".
https://imgur.com/V4FI1Tl
4- Rename the following files:
md1img.img to md1rom.imgscp.img to tinysys-scp1.binlk.img to lk.bintee.img to trustzone1.binYou must change name AND extension.
5- Extract the preloader binary: for this, open the "WMR MTK" folder and execute "WwR_MTK_2_51.exe", then wait for 120 seconds (because it's a free version).
Go to preloader tab, then click "Select File" and open the "Preloader.img" file.
https://imgur.com/w6oNJv6
Then click on "To extract preloader and save as..." and save the file in the folder with the other using the name "preloader_s96116aa1.bin".
https://imgur.com/m2lIeRv
6- Your Scatter Firmware it's done for be flashed on your device. The result will be like this:
https://imgur.com/WGge7xa
Post in the thread any inconveniences if you face, I will try to help you.
RESERVED POST
GonicTEAM said:
How to make a Scatter Firmware for your Galaxy A10sREQUIREMENTS- Last version of 7Zip ZStandard. Download it from the releases and install: https://github.com/mcmilk/7-Zip-zstd/releases
- A firmware that match with your phone binary. If you dont know, use the last one. You can download it from various sites, but i recommend to use SamFW.com. You need to decompress the firmware to get the 5 files needed.
PROCESS1- Create a new folder and place this file in: https://www.androidfilehost.com/?fid=7161016148664790665
2- Now, go where you downloaded the firmware. Right click on the AP File and click "7Zip ZS" option and select "Open Archive" (first option).
3- We will open file by file, and then we will drag the content of each one inside to the folder with the scatter.txt file. Repeat it with AP, BL, CP and CSC Firmware files (HOME_CSC isn't used).
The result will be like this:
https://imgur.com/wcHVfop
3- Now go to "View" tab in the Windows Explorer, and then tick "File Name Extensions".
https://imgur.com/V4FI1Tl
4- Rename the following files:
md1img.img to md1rom.imgscp.img to tinysys-scp1.binlk.img to lk.bintee.img to trustzone1.binYou must change name AND extension.
5- Extract the preloader binary: for this, open the "WMR MTK" folder and execute "WwR_MTK_2_51.exe", then wait for 120 seconds (because it's a free version).
Go to preloader tab, then click "Select File" and open the "Preloader.img" file.
https://imgur.com/w6oNJv6
Then click on "To extract preloader and save as..." and save the file in the folder with the other using the name "preloader_s96116aa1.bin".
https://imgur.com/m2lIeRv
6- Your Scatter Firmware it's done for be flashed on your device. The result will be like this:
https://imgur.com/WGge7xa
Post in the thread any inconveniences if you face, I will try to help you.
Click to expand...
Click to collapse
OMG! It Works!!! Thank you a hundred of times!
Everything is fine. in step 8 when i click download it says its not verified. what are the conneciton options you mentioned in step 5. thank you in advance ♥
wheni click download gives me this error status_sec_img type_mismatch
Radiant404 said:
Everything is fine. in step 8 when i click download it says its not verified. what are the conneciton options you mentioned in step 5. thank you in advance ♥
Click to expand...
Click to collapse
It's because u aren't follow the script step to bypass the protection.
GonicTEAM said:
It's because u aren't follow the script step to bypass the protection.
Click to expand...
Click to collapse
Radiant404 said:
Everything is fine. in step 8 when i click download it says its not verified. what are the conneciton options you mentioned in step 5. thank you in advance ♥
Click to expand...
Click to collapse
I've got the same issue, i followed carefully the indications too.
I'm loosing my mind with this
Greetings.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
prudenthps said:
I've got the same issue, i followed carefully the indications too.
I'm loosing my mind with this
Greetings.
View attachment 5400405
Click to expand...
Click to collapse
Try to make a new scatter firmware, or search more info about it on Google. I didn't face that problem in my A107M
GonicTEAM said:
Try to make a new scatter firmware, or search more info about it on Google. I didn't face that problem in my A107M
Click to expand...
Click to collapse
I found something new for me, the phone is actually working, used odin, and another firmware after the bypass utility, and worked. But the phone screen keeps black. Like no even the samsung logo shows up, everything else works, it boots, recovery and download mode (i know because vibration, and the Google talkback sounds and can be turned on and off). I'm pretty sure is a firmware issue because when i started 7 hour ago, it was working well. Thanks a lot for this thread. Now i need to figure how to fix the BSoD :/
I've done this over +50 times already on other phones at work*
btw sorry, my english ain't that good.*
VID_20210902_204110.mp4
drive.google.com
URL, Video of mobile.
Thanks a lot for the guide! It worked on my SM-A107M, which went dead after flashing it with Magisk and updating the app. Can't apply any Android updates due to the phone detecting that it was modified but I assume this can be fixed by flashing the stock ROM. Thanks again!.
prudenthps said:
I found something new for me, the phone is actually working, used odin, and another firmware after the bypass utility, and worked. But the phone screen keeps black. Like no even the samsung logo shows up, everything else works, it boots, recovery and download mode (i know because vibration, and the Google talkback sounds and can be turned on and off). I'm pretty sure is a firmware issue because when i started 7 hour ago, it was working well. Thanks a lot for this thread. Now i need to figure how to fix the BSoD :/
I've done this over +50 times already on other phones at work*
btw sorry, my english ain't that good.*
VID_20210902_204110.mp4
drive.google.com
URL, Video of mobile.
Click to expand...
Click to collapse
Hi can you fixed?
Radiant404 said:
wheni click download gives me this error status_sec_img type_mismatch
Click to expand...
Click to collapse
Hello, were you able to install it??
phoenixmet said:
Hello, were you able to install it??
Click to expand...
Click to collapse
hey did you get any solution for this?
if yes can you help me to sort is out!
Thanks in advance
GonicTEAM said:
How to make a Scatter Firmware for your Galaxy A10sREQUIREMENTS- Last version of 7Zip ZStandard. Download it from the releases and install: https://github.com/mcmilk/7-Zip-zstd/releases
- A firmware that match with your phone binary. If you dont know, use the last one. You can download it from various sites, but i recommend to use SamFW.com. You need to decompress the firmware to get the 5 files needed.
PROCESS1- Create a new folder and place this file in: https://www.androidfilehost.com/?fid=7161016148664790665
2- Now, go where you downloaded the firmware. Right click on the AP File and click "7Zip ZS" option and select "Open Archive" (first option).
3- We will open file by file, and then we will drag the content of each one inside to the folder with the scatter.txt file. Repeat it with AP, BL, CP and CSC Firmware files (HOME_CSC isn't used).
The result will be like this:
https://imgur.com/wcHVfop
3- Now go to "View" tab in the Windows Explorer, and then tick "File Name Extensions".
https://imgur.com/V4FI1Tl
4- Rename the following files:
md1img.img to md1rom.imgscp.img to tinysys-scp1.binlk.img to lk.bintee.img to trustzone1.binYou must change name AND extension.
5- Extract the preloader binary: for this, open the "WMR MTK" folder and execute "WwR_MTK_2_51.exe", then wait for 120 seconds (because it's a free version).
Go to preloader tab, then click "Select File" and open the "Preloader.img" file.
https://imgur.com/w6oNJv6
Then click on "To extract preloader and save as..." and save the file in the folder with the other using the name "preloader_s96116aa1.bin".
https://imgur.com/m2lIeRv
6- Your Scatter Firmware it's done for be flashed on your device. The result will be like this:
https://imgur.com/WGge7xa
Post in the thread any inconveniences if you face, I will try to help you.
Click to expand...
Click to collapse
i didn't fidn this option
Then click on "To extract preloader and save as..."
plz help me to fix this
GonicTEAM said:
Hi, yesterday I bricked my Galaxy A10s by flashing a custom recovery by Odin (The phone doesn't enter in Download or recovery modes, it just does nothing):
Immediately I started looking for how to fix it, and after a lot of research, here is how to:
REQUIREMENTS
Windows 10 x64 bit PC with Internet Connection (may work on Win7/8).
A USB Cable
Scatter firmware:
For SM-A107M Binary5: https://www.androidfilehost.com/?fid=7161016148664790627
For SM-A107F Binary8: https://www.androidfilehost.com/?fid=7161016148664790683
PROCESS1- Download this file and decompress it using 7Zip or WinRAR. then open the folder: https://www.androidfilehost.com/?fid=7161016148664790681
2- Python3 installation: open the python installer. Mark the "ADD Pyhton 3.9 TO PATH" option: https://i.imgur.com/9hxjD5p.jpg
Then click "Install Now". When finished click close. Open a cmd (write cmd in Windows Start Menu and open it) and paste this comand:
pip install pyusb pyserial json5If all its okay, you must see something like this:
https://imgur.com/YdHQgk2
If not, uninstall all versions of python you have installed and reinstall the provided one, remember to check the "Add to PATH".
3- MTK Driver: open the "MediaTek SP Drivers v2.0 signed" folder, then open Android, do a right click over "android_winusb.inf" and click install. Go back and open "CDC" folder. Right click "cdc-acm.inf" and press install. In both cases, it will say "Installation successfully".
4- Decompress the scatter firmware provided at the first of the post. If you wanna make one, because you have another model or binary, see the next post.
5- Prepair SP Flash Tool: open the "SP_Flash_Tool" folder and execute "flash_tool.exe" as Administrator.
Click "Choose" button in the Scatter-Loading file line and search the folder where you decompressed the Scatter Firmware. Open the file "MT6765_Android_scatter.txt". https://i.imgur.com/BLYlaSX.jpg
Make sure the option below "Authentication File" is "Download Only". If not, select it from the list.
Now, go to "Options" > "Option..." and unmark these 3.
Go to connection and put all like the photo:
Done, now we have SP Flash Tool ready.
5- Connect your Galaxy A10s to your computer. Your phone its cycling rebooting itself, entering into preloader mode for 2 seconds, every 10-15 seconds.
Now install "libusb-win32-devel-filter-1.2.6.0.exe" and click finish to open it. Select "Install a device filter" and click next. A list will appears, so wait for your Phone to enter into Preloader. It will appear in the list (as Preloader USB VCOM Port), so rapidly select it and then click "Install". https://i.imgur.com/Kzv3lkD.jpg
If it appears, all is okay, if not, repeat this step. Don't close the program after do this.
6- With this done, open the "bypass_utility-v.1.4.2" folder. In the keyboard, press "Shift" (the key with a up pointed arrow, below enter) and without releasing it, right click inside the folder. In the menú, click "Open Power Shell here".
Now, write this and press enter:
python main.pyIf this command does nothing, try with this variant: py -3 main.py
Now, wait for the phone reboot again in preloader. This time, the script will make the phone keep in the Preloader, and the PowerShell will tell you that an error was ocurred. https://i.imgur.com/ZCsRmtN.jpg
So, open libusb-win32 program from the taskbar and search for "Mediatek USB Port". Select it and press next, to install the device filter for it.
https://imgur.com/ouu6u2c
7- Maximize Power Shell and write this command again:
Code:
python main.py
(or py -3 main.py)
NOTE: If PowerShell it's stuck on "waiting for the device" for more than 2 minutes, press Power, vol+, and vol- buttons at the same time for 7 to 15 seconds to force a reboot.
This time, the log will tell you "[2021-08-21 13:28:01.303625] Protection disabled". https://i.imgur.com/2avTTNi.jpg
Plz, don't disconnect the phone.
8- Go back to SP Flash Tool program and click in the "Download" button and it will start to flash your phone. https://i.imgur.com/iknxeUE.jpg
https://imgur.com/huHh7tz
9- When finished, you will see a green tick and your phone will disconnect from the computer. Now, press the power and volume down (-) buttons at the same time, and keep it until you see the Download Mode.
https://imgur.com/Bi4AITN
10- Now, flash the last Firmware for your phone using Odin. Exists a lot of tutorials on Google and YouTube for it, so i will leave you to search one.
11- Done! Your phone its alive again.
Thanks to fromgodd & Dego09 for helping me, without them, this tutorial wasn't possibleMy english isn't perfect. You can tell me any corrections. Thanks in advance.
Click to expand...
Click to collapse
Thank's a lot!!! This has saved my wife phone!!!
prudenthps said:
I've got the same issue, i followed carefully the indications too.
I'm loosing my mind with this
Greetings.
View attachment 5400405
Click to expand...
Click to collapse
its easy, here is what I did. Uncheck the one that is giving you the mismatch, next do again the steps from pyton code python main.py to disable security and flash the rest. after its complete force restart the phone and it will enter dw mode. flash your a10s stock firmware and your are good to go.
PD. if you get read pit error, extract A10S_LTN_OPEN_PRODUCT600M file from csc file using winrar and choose the pit file flash and you are done.
Hi! I'm having a similar problem. I tried to implement TWRP recovery on my a10s and since that it isn't working. It is recognizing as a modem im my computer, for some reason. I triend changing the driver for the Mediatek Preloader VCOM COM7 and try your tutorial but didn't make anything different. When i run the powershell on bypass utility it just waits for the device over and over.
My a10s doesn't react to any combination of vol. button and power button and i don't know what to do.
If anyone wants to know the procedure i did to make my a10s dead, i can explain in details what happened.
Thanks for reading!
Hi, thank you very much for the guide but in my case:
now working even in false.
thank you
Hi, what are the options that I need to uncheck in options and in connection, there is no photo as explained in the tutorial...Please
Now, go to "Options" > "Option..." and unmark these 3.
Go to connection and put all like the photo:
Done, now we have SP Flash Tool ready.
Click to expand...
Click to collapse