Develop Bugs

[Q] How to extract firmware package via Kies Firmware Update

can u point out the folder???

It resides in the User Temp folder of your windows user profile.
And is deleted as soon as the firmware upgrade is completed on your phone.

can you post the exact compressed file name..what zip utility are you using.
I know winzip is suck..cant unzip alot of stuff.
What size is the package file ?
if the package is stored on non-english characters..that post problem too.

Its just any random file name ending with a TMP extension. Its about 257MB.
e.g. tmp2EFA.tmp
Still no leads to opening this file.

Post the first line of the file: some formats are identifiable based on their opening signature.
Sent from my GT-I9000 using XDA App

i2umi said:
Its just any random file name ending with a TMP extension. Its about 257MB.
e.g. tmp2EFA.tmp
Still no leads to opening this file.
Click to expand...
Click to collapse
What unzip program are you using ?
Can you try change the extension to .7z and use WinRar to unzip it..Winzip no go

Before Kies starts to flash the firmware, it decrypts the .tmp file to .zip file in the same directory. When Kies update window says "Extracting binary file" or something like that, you can copy the zip file from temp directory. It contains one tar and one dll file. Tar file can be flashed with Odin

Norpa76 said:
Before Kies starts to flash the firmware, it decrypts the .tmp file to .zip file in the same directory. When Kies update window says "Extracting binary file" or something like that, you can copy the zip file from temp directory. It contains one tar and one dll file. Tar file can be flashed with Odin
Click to expand...
Click to collapse
If that's the case, are there any other ways to decrypt this file back to zip directly than doing the whole upgrade thing again just for the zip?

hmanxx said:
What unzip program are you using ?
Can you try change the extension to .7z and use WinRar to unzip it..Winzip no go
Click to expand...
Click to collapse
Tired all. no go.

i2umi said:
Tired all. no go.
Click to expand...
Click to collapse
Use the method given on post #8

sammobile files

i downloaded the stock rom for sgh-t989 2.3.6 from sammobile.com do i use odin or cwm recovery?

firechicken25 said:
i downloaded the stock rom for sgh-t989 2.3.6 from sammobile.com do i use odin or cwm recovery?
Click to expand...
Click to collapse
Is it a zip (that doesn't have a tar inside) or is it a tar file? Zip will most likely be in CWM, tar is always ODIN.
Sent from my SGH-T989 using xda premium

zip. it would even allow me to open it either. gave me a bunch of errors

i just tried to go thru cwm and it aborted installation. the error says its md5 file inside

firechicken25 said:
i just tried to go thru cwm and it aborted installation. the error says its md5 file inside
Click to expand...
Click to collapse
What does the file structure look like inside of the zip?

i have downloaded 2 different files that are supposedly 2.3.6 and none of them are working. i have a zip version i got from sammobile.com that i think that is password locked but only gives me an error when i try to extract it. i can open it and theres a md5 file in there
the other one is a rar file and i dont know what to do with it.
i have darkside digital warfare rom but i cannot get it to install correctly thru cwm. i gets to darth vader loading screen blue line fills up then flashes samsung and turns off and thats it.
i just want to get back to stock and take the back and start over with a new one

skadude66 said:
What does the file structure look like inside of the zip?
Click to expand...
Click to collapse
sorry i didnt see ur post before my last post
when i open the zip folder there is 2 files, one is an md5 file that is 350mb. the other is SS_DL.dll (application extension) 128kb. on the password column it says yes for both files

firechicken25 said:
sorry i didnt see ur post before my last post
when i open the zip folder there is 2 files, one is an md5 file that is 350mb. the other is SS_DL.dll (application extension) 128kb. on the password column it says yes for both files
Click to expand...
Click to collapse
It's a .tar.md5 file extension?

in the type column just says md5. it doesnt say tar anywhere

Yes they are files to use through odin inside a zip file...
And they are password protected ... You must extract the zip first , then use the file in odin ...
usually samfirmware.com, sammobile.com or something like that ...

thanks for your help guys. i will try tomorrow when i get home from work. i have juggernaut running pretty good on it now

sounds like you have an incomplete dl too

where would i put in the password on the sammobile stock rom? i will redownload it to see if changes

Odin do PDA file found

I've downloaded everything and can't figure out what I am missing.
I put my T Mobile Samsung s4 m919 device in download mode ...
I plug it in and start Odin in admin mode.
I uncheck auto reboot and see Com 4 in green
I click PDA and find no files for it.

lthaga said:
I've downloaded everything and can't figure out what I am missing.
I put my T Mobile Samsung s4 m919 device in download mode ...
I plug it in and start Odin in admin mode.
I uncheck auto reboot and see Com 4 in green
I click PDA and find no files for it.
Click to expand...
Click to collapse
If your download file still in .zip format?
If so you need to unzip it into it's usable *.TAR format.

Skipjacks said:
If your download file still in .zip format?
If so you need to unzip it into it's usable *.TAR format.
Click to expand...
Click to collapse
I tried twice, it did not successfully root. Can you give me the link to verify that I am using right link?

Is Anyone on OB3 on SGH-I747M(no I747)and are willing to create a debrick.img for me?

I need to debrick my s3 previously running on 4.4.2 OB3. is anyone running OB3 on s3 I747M (not the I747)?
I have the instructions ready. so first, root your phone. If you don't want to root your phone, good bye because I don't need you. Ill get to the next step once someone is willing to help.

I have the OB1 how you make a debrick? do you have a tutorial? i can help u

dragoonmx said:
I have the OB1 how you make a debrick? do you have a tutorial? i can help u
Click to expand...
Click to collapse
ok. so, first, install busybox from the playstore. then, download terminal emulater, as well.

MhikeiMPC12 said:
ok. so, first, install busybox from the playstore. then, download terminal emulater, as well.
Click to expand...
Click to collapse
Done, what's next...

go into terminal app, type the following:
"su"
It will ask you for root access. type Grant.
"busybox dd if=/dev/block/mmcblk0 of=/sdcard/backup.bin bs=1M count=70"
It will create a backup.bin in the root of /sdcard. ipload that file here. if the file type isnt supported, put it in a .zip then upload it using your pc. if you dont have a pc, just rename the end part of the file (.bin) to (.zip) and upload it here.

@dragoonmx

did he died?

Lets forget him. Do you have OB1?

MhikeiMPC12 said:
Lets forget him. Do you have OB1?
Click to expand...
Click to collapse
Hey, im in cm12.1, i need rom stock?

Thank goodness you are back! here is the link for stock:
http://dl.sammobile.com/PV9dRCQlOD0...1tcQExaUQ../I747MVLUFOB3_I747MOYAFOB3_RWC.zip

MhikeiMPC12 said:
Thank goodness you are back! here is the link for stock:
http://dl.sammobile.com/PV9dRCQlOD0...1tcQExaUQ../I747MVLUFOB3_I747MOYAFOB3_RWC.zip
Click to expand...
Click to collapse
could you link me a full tutorial for the debrick?

OK download Odin v3.07 search it in Google. then, open Odin, and extract all the files to the desktop.
Before continuing, make sure to backup all of your files because it will be deleted. The file you downloaded before, open it with winrar, then extract the files inside, to the desktop. Open Odin. Get your phone and turn it off. Once its off, hold vol down + home button + power button until you get the prompt to go to download mode. click vol up and it should say "Downloading...". Connect the phone to the computer, and Odin should recognise it. go to the AP slot, click it, and navigate to the file you extracted. Wait for Odin to recognise the file. After, click start, and don't disconnect it until it says "PASS" on the screen, or the phone boots up completely in the set-up. Its recommended that you eject the SD card in your phone (if you have one). Also, make sure only F reset time, and auto reboot are checked.

MhikeiMPC12 said:
OK download Odin v3.07 search it in Google. then, open Odin, and extract all the files to the desktop.
Before continuing, make sure to backup all of your files because it will be deleted. The file you downloaded before, open it with winrar, then extract the files inside, to the desktop. Open Odin. Get your phone and turn it off. Once its off, hold vol down + home button + power button until you get the prompt to go to download mode. click vol up and it should say "Downloading...". Connect the phone to the computer, and Odin should recognise it. go to the AP slot, click it, and navigate to the file you extracted. Wait for Odin to recognise the file. After, click start, and don't disconnect it until it says "PASS" on the screen, or the phone boots up completely in the set-up. Its recommended that you eject the SD card in your phone (if you have one). Also, make sure only F reset time, and auto reboot are checked.
Click to expand...
Click to collapse
Lol, for the debrick

Sorry bro I'm on 4.1.1 Stock and Rooted. Can't do OTAs.

dragoonmx said:
Lol, for the debrick
Click to expand...
Click to collapse
Just do what i told you to do earlier. read the other comments. the commands are over there

Hey man! Sorry I haven't been able to respond recently. Sent you a pm, but basically I've been in and out of town a lot the last few days!
Got a couple items that makes the process of creating a debrick.img very easy! Started out with a simple script and it evolved from there!
This one will create a 128mb debrick.img on your internal sdcard. (/sdcard/debrick.img)
Download this and flash in TWRP: https://www.androidfilehost.com/?fid=23196940996969297
That's It! Now just zip and upload!
(ignore the T999 in the filename
It will work on the I747 too)
This next one is slightly more difficult to use, but still easy if you just follow the instructions included in the zip file.
It includes options to create 128mb, 256mb and 512mb images. You should only need the 128mb one but we were using this for testing and troubleshooting when new firmwares were released.
Do NOT flash in recovery. Unzip and follow the included instructions. It will create the debrick.img and then will zip it for you using 7zip.
https://www.androidfilehost.com/?fid=23196940996969297
The first is the easiest and probably all you need. Just included the second in case anyone wants to try it or the first method doesn't produce a working image. (Doesn't fix a brick)
Hope it helps!
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
Hey man! Sorry I haven't been able to respond recently. Sent you a pm, but basically I've been in and out of town a lot the last few days!
Got a couple items that makes the process of creating a debrick.img very easy! Started out with a simple script and it evolved from there!
This one will create a 128mb debrick.img on your internal sdcard. (/sdcard/debrick.img)
Download this and flash in TWRP: https://www.androidfilehost.com/?fid=23196940996969297
That's It! Now just zip and upload!
(ignore the T999 in the filename
It will work on the I747 too)
This next one is slightly more difficult to use, but still easy if you just follow the instructions included in the zip file.
It includes options to create 128mb, 256mb and 512mb images. You should only need the 128mb one but we were using this for testing and troubleshooting when new firmwares were released.
Do NOT flash in recovery. Unzip and follow the included instructions. It will create the debrick.img and then will zip it for you using 7zip.
https://www.androidfilehost.com/?fid=23196940996969297
The first is the easiest and probably all you need. Just included the second in case anyone wants to try it or the first method doesn't produce a working image. (Doesn't fix a brick)
Hope it helps!
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
@DocHoliday77 , any chance in hades this would work for atthtcm8 ? i know are completely different beasts , but figured couldnt hurt (too much.lol) to ask.
p.s. not bricked. just to have as 911-just-n-freakin-case.
"all i can really do is stay out of my own way and let the will of heaven be done"

DocHoliday77 said:
Hey man! Sorry I haven't been able to respond recently. Sent you a pm, but basically I've been in and out of town a lot the last few days!
Got a couple items that makes the process of creating a debrick.img very easy! Started out with a simple script and it evolved from there!
This one will create a 128mb debrick.img on your internal sdcard. (/sdcard/debrick.img)
Download this and flash in TWRP: https://www.androidfilehost.com/?fid=23196940996969297
That's It! Now just zip and upload!
(ignore the T999 in the filename
It will work on the I747 too)
This next one is slightly more difficult to use, but still easy if you just follow the instructions included in the zip file.
It includes options to create 128mb, 256mb and 512mb images. You should only need the 128mb one but we were using this for testing and troubleshooting when new firmwares were released.
Do NOT flash in recovery. Unzip and follow the included instructions. It will create the debrick.img and then will zip it for you using 7zip.
https://www.androidfilehost.com/?fid=23196940996969297
The first is the easiest and probably all you need. Just included the second in case anyone wants to try it or the first method doesn't produce a working image. (Doesn't fix a brick)
Hope it helps!
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
So, with this i can create de img, instead of using terminal, codes, etc ?

MhikeiMPC12 said:
I need to debrick my s3 running on 4.4.2 OB1. is anyone running OB1 on s3 I747M?
I have the instructions ready. so first, root your phone. If you don't want to root your phone, good bye because I don't need you. Ill get to the next step once someone is willing to help.
Click to expand...
Click to collapse
Hi, this is the debrick link for the OB1, i747M
https://mega.nz/#!M9ly3DZB!I58rC4SG33Y7k8SWfoKHYwQssasHmwxBPELYQ5bGvv4

dragoonmx said:
Hi, this is the debrick link for the OB1, i747M
https://mega.nz/#!M9ly3DZB!I58rC4SG33Y7k8SWfoKHYwQssasHmwxBPELYQ5bGvv4
Click to expand...
Click to collapse
Ok thanks so much!
Here goes nothing...

Need help finding .tar or .md5 file to flash back to stock.

Hello all, I need some help finding the .tar or the .md5 file from the stock ROM zip file (Tab Pro 8.4).
I am trying to flash / revert back to stock ROM and recovery, since I am giving this tablet to my nephew. I've downloaded the official firmware directly from Samsung, I've downloaded Odin V3.07 and the samsung drivers are installed on my laptop. I've used Odin before, to flash files (months ago), but where I'm getting stuck is on Odin when I go to select the .tar or the .md5 file form the zip, I can't locate the files. I've extracted them several times using different methods, but not a single time have I been able to extract a .tar or .md5 file, all I get is: META-INF folder, system folder and boot disk image, no .tar or .md5 file anywhere in the folders either.
Am I an idiot here or what am I doing wrong that I don't get the .tar or .md5 file?
Any help is appreciated, thanks!

i am not sure where you downloaded it from. i took it from sammobile and the name of the zip is: T320XXU1BNI1_T320DBT1BNJ1_DBT.zip inside it being a file named: T320XXU1BNI1_T320DBT1BNJ1_HOME.tar.md5
PS: i have a german device thats why the DBT code...please download yours...

mospantagruel said:
i am not sure where you downloaded it from. i took it from sammobile and the name of the zip is: T320XXU1BNI1_T320DBT1BNJ1_DBT.zip inside it being a file named: T320XXU1BNI1_T320DBT1BNJ1_HOME.tar.md5
PS: i have a german device thats why the DBT code...please download yours...
Click to expand...
Click to collapse
I am downloading it one more time from sam mobile just to make sure. How did you extract the zip (what program)? 7zip, winrar, etc?

i think i know whats going on. i use winrar for windows you probably use something else. inside .zip there is a .md5 file but inside .md5 file there are meta folders etc. some software consider it being an archive inside an archive and it doesn't even bother to tell you that probably it's extracting folders directly...

mospantagruel said:
i think i know whats going on. i use winrar for windows you probably use something else. inside .zip there is a .md5 file but inside .md5 file there are meta folders etc. some software consider it being an archive inside an archive and it doesn't even bother to tell you that probably it's extracting folders directly...
Click to expand...
Click to collapse
use 7 zip, there should be a .tar.md5 in the .zip only extract the .tar.md5. dont extract anything from the tar.md5. just select the tar.md5 in odin after you put your device in download mode