Anyone attempted to remove a good digitizer from the frame without damaging it? It is possible?
Related
Hi,
I thought I might risk it without a screen protector and kinda regret that decision.
I ordered a digiziter from ebay http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=350227180757
I am wondering how easy is it to replace? Can I just remove the plastic/chrome sides and replace this bit from the top down? Or do I have to remove the LCD and everything else to get to it?
i need to attach a digitizer to an lcd screen. where do you get the double-sided tape for this? thanks!
Unfortunately, I recently cracked my phone's screen. So, I bought a screen off of eBay.
Does anyone have any experience with this kit:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=261352263447
I know how to remove the phone's case to access the glass, and generally everything else needed to replace the glass.
But, I have no idea how to use the adhesives supplied. Can anyone share having used this?
Luigiman765 said:
Unfortunately, I recently cracked my phone's screen. So, I bought a screen off of eBay.
Does anyone have any experience with this kit:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=261352263447
I know how to remove the phone's case to access the glass, and generally everything else needed to replace the glass.
But, I have no idea how to use the adhesives supplied. Can anyone share having used this?
Click to expand...
Click to collapse
Ive been fixing glass on note 2's for a long time now. First off all those tools are for taking off back cover and board out. Do not use on the glass. you need a heat gun and some patience, lots of it. I use a card trick, anyways after you remove the glass put the adheasive on the outside edges make sure its cleaned up then either stick glass on. or use uv glue to bond. IF you need any help let me know.
There are a few youtube videos. Look for galaxy note 2 front glass replacement.
Dropped my phone and the digitizer has cracked but LCD is good underneath. Anyone have a guide on replacing this?
Same issue!!!!
I have faced same problem. Is there any solution for replacement of digitizer???
nurrishd said:
Dropped my phone and the digitizer has cracked but LCD is good underneath. Anyone have a guide on replacing this?
Click to expand...
Click to collapse
http://www.ihowfix.com/xiaomi-mi-max-teardown/
Facing the same problem. Watch this:
ht tps ://m.youtube.com/watch?v=qr_iAJ7EYWQ[/url]
Replacement of top glass
ptr21 said:
Facing the same problem. Watch this:
ht tps ://m.youtube.com/watch?v=qr_iAJ7EYWQ[/url]
Click to expand...
Click to collapse
This video shows how to replace the full assembly LCD touch screen + digitizer (aka top glass).
The question is: Is there a way to replace ONLY the top glass (digitizer) without buying the whole assembly (LCD + digitizer)?
If someone finds a video showing how to replace ONLY digitizer, please post here.
Just buy the whole screen assembly, it's dirt cheap:
https://www.aliexpress.com/item/3-in-1-With-Frame-For-Xiaomi-Mi-Max-LCD-Display-Touch-Screen-Digitizer-Assembly-Replacement/32797036983.html?spm=2114.01010208.3.19.ul2ww2&ws_ab_test=searchweb0_0,searchweb201602_2_10065_10068_10130_703_10136_10137_701_10060_10138_10062_10141_203_10056_10055_10054_10059_10099_129_10103_10102_10096_10052_10144_10053_10142_10107_10050_10143_10051_10525_10529_10084_10083_10080_10082_10081_10110_10111_10112_10113_10114_10516_10515_10078_10079_10073_10070_10122_10123_10124-10516_10102,searchweb201603_1,afswitch_1,ppcSwitch_5,single_sort_0_default&btsid=2f8b8668-9617-48ef-b92b-406b4a9addd9&algo_expid=a79419f4-f357-4608-b6fb-a9928e9582a2-2&algo_pvid=a79419f4-f357-4608-b6fb-a9928e9582a2
Anyone managed to replace digitizer alone ( particularly in india) ? Problem is i dont want to lose original lcd panel since easily available complete display sets have compatible panels with poor colors.
Need info about competent, skilled reliable person doing this job in Mumbai, Pune. Tks.
I have an issue with my Lg G3 LS990 touch screen digitizer glass. The glass popped up from left bottom and can see the light clearly. So, thought of replacing the glass. I saw in aliexpress that Touch screen digitizers are available. So is only glass replacement is possible in G3 ? Display is very fine. I happened to see in youtube videos that only LCD replacement is done but not Glass digitizer replacement. Could anyone clear my doubt? had anyone replaced their only glass and using it without any issues?
You can do it but it's quite difficult and there's a risk of damaging the LCD so if I were you I wouldn't even try as it requires a certain experience repairing cellphones. Your best option so far will be replacing LCD + digitizer which most likely comes as one piece
whole lcd digitizer with frame ain't that expensive at ebay, i had cracked digitizer and fastest and easiest way to fix it was just to replace whole assembly.
stepi1 said:
whole lcd digitizer with frame ain't that expensive at ebay, i had cracked digitizer and fastest and easiest way to fix it was just to replace whole assembly.
Click to expand...
Click to collapse
Actually i have already ordered the digitizer from aliexpress.com. As they are selling only digitizers, i thought it is possible to eplace only glass. So u mean to say that replacing only glass isnt possible? What are the chances of working if i only replace glass but not whole assembly?
Sent from my LGLS990 using XDA-Developers mobile app
replacing just glass is possible but it requires special tools and it's quite complicated task to do, replacing whole assembly can be done just under 10 minutes with screwdriver.
As far as i know lcd and digitizer are glued together, you need to warm that adhesive to separate those and lcd needs to be glued to new digitizer and in this phase i think you need OCA or LOCA glue and UV lamps or something like that... So at that point of the replacing glass process i tought it would be easier to just by that whole assembly
stepi1 said:
replacing just glass is possible but it requires special tools and it's quite complicated task to do, replacing whole assembly can be done just under 10 minutes with screwdriver.
As far as i know lcd and digitizer are glued together, you need to warm that adhesive to separate those and lcd needs to be glued to new digitizer and in this phase i think you need OCA or LOCA glue and UV lamps or something like that... So at that point of the replacing glass process i tought it would be easier to just by that whole assembly
Click to expand...
Click to collapse
Is it not possible to replace without LOCA and UV u mentioned? Just normal procedure doesnt works? The seller is sending me all tools and sticker. Didnt they suffecient enough to replace?
Sent from my LGLS990 using XDA-Developers mobile app
I quess LOCA is liquid and OCA is sticker, same stuff different format. It is possible to do, but without good tools and enough experience i doubt it works or looks good. I have been repairing electronic equipment for years on work but i still wont try to change that digitizer at home because i don't have that kind of tools here...
if you need information about that process look samsung digitizer replace videos from youtube, phone is different but process it self ain't that much different.