My Galaxy S3 wont charge , turn on , Connect to Pc - T-Mobile, Samsung Galaxy SIII

Yesterday i rooted and tried to install a Rom and used Rom manager to go into recovery mode. I thought you had to do the down+home+power and now when I try to do anything it wont work power button 20 sec , power+home , up/down+power+home,nothing.When i tried plug it into the computer it makes that sound when something failed to connect to the pc. When i tried holding the power button i hear the sound of the device successfully connect to the pc but when i look theres no phone on the computer and when i let go of the power button it stops. Any help would be very much appreciated and i will never do anything to risk my device being broken again...

What did you install? Link the ROM or at least the name of the ROM.
Sent from my SGH-T999 using xda premium

mt3g said:
What did you install? Link the ROM or at least the name of the ROM.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I didnt install anything all i did was use rom manager to go into recovery mode i was trying to install a jelly bean rom but recovery mode never showed up

Did you modify your build.prop?

Can you still access the download mode? If yes try to flash back a stock rom with odin.
Or remove the battery and try again to boot up in download mode.

Max) said:
Can you still access the download mode? If yes try to flash back a stock rom with odin.
Or remove the battery and try again to boot up in download mode.
Click to expand...
Click to collapse
No i cant acess anything download mode or clockwork recovery , cant connecty to pc cant turn on just a black screen...

Its volume up&home button&power you will see little blue text in the top left let go of buttons.
Sent from my SGH-T999 using xda premium

Try a different usb slot sometimes a usb slot may malfunction I had that problem.
Also don't use a usb extender hub if you are it may screw with the voltage.
a new usb I'm sure you've heard that one but this has the least chance of working because you the s3 makes the noise which means the usb works
Try a new computer and check that you have Kies installed
Try to restart the laptop that also helps
Hope I helped you out
Sent from my SGH-T999V using xda premium

Which Rom were u trying to flash be specific.
Sent from my SGH-T999 using xda premium

Unfortunately, I have this exact same problem. I'm really scared that I may have bricked my device...
The last time my phone was working, I simply updated my phone to CM10's latest update for the phone. Everything was working perfectly fine. All I did was download the latest rom from get.cm for my sgs3.
Then I read online that this new 4.1.2 rom came out. As a new member XDA won't allow me to post the link of the rom...but you can find it in the Original Development Thread of the T-Mobile SGS3. Slim-i9300-2.7.0-OFFICIAL is the name of the rom [I copied it directly].
After making a backup of my current rom, installing this rom and installing the new gapps, I rebooted the device and nothing has worked since... [this happened about 12 hours ago].
Now, when I take out the battery and plug the charger in, the notification light becomes solid red. But nothing works...I can't go into download mode, I can't go into recovery. I knew this immediately when the phone did not vibrate after me holding down the power button for a few minutes.
The red notification light only turns on when I plug in the phone when the battery is out. If I put the battery in, after a few moments it goes away. I honestly thought maybe the battery was just dead...but I left it plugged in all night and I still can't do anything with the phone.
Please, any help for me and whtnld would be much appreciated...

@OP
Did you mod the build.prop for any reason? (Google wallet maybe?)
If you did and then tried to update/install recovery through Rom Manager, it may have tried to install the wrong recovery on the wrong partition, resulting in a hard brick.
Sent from my SGH-T999 using xda app-developers app

jeikei4life said:
Unfortunately, I have this exact same problem. I'm really scared that I may have bricked my device...
The last time my phone was working, I simply updated my phone to CM10's latest update for the phone. Everything was working perfectly fine. All I did was download the latest rom from get.cm for my sgs3.
Then I read online that this new 4.1.2 rom came out. As a new member XDA won't allow me to post the link of the rom...but you can find it in the Original Development Thread of the T-Mobile SGS3. Slim-i9300-2.7.0-OFFICIAL is the name of the rom [I copied it directly].
After making a backup of my current rom, installing this rom and installing the new gapps, I rebooted the device and nothing has worked since... [this happened about 12 hours ago].
Now, when I take out the battery and plug the charger in, the notification light becomes solid red. But nothing works...I can't go into download mode, I can't go into recovery. I knew this immediately when the phone did not vibrate after me holding down the power button for a few minutes.
The red notification light only turns on when I plug in the phone when the battery is out. If I put the battery in, after a few moments it goes away. I honestly thought maybe the battery was just dead...but I left it plugged in all night and I still can't do anything with the phone.
Please, any help for me and whtnld would be much appreciated...
Click to expand...
Click to collapse
You flashed an intl rom. Hard bricked. Need JTAG repair or replace unit.

I was about to say, isn't the i9300 the intl version? the tgh-t999 is the TMOUS version.

You have to let go of the power button to get into recovery.

jeikei4life said:
Unfortunately, I have this exact same problem. I'm really scared that I may have bricked my device...
The last time my phone was working, I simply updated my phone to CM10's latest update for the phone. Everything was working perfectly fine. All I did was download the latest rom from get.cm for my sgs3.
Then I read online that this new 4.1.2 rom came out. As a new member XDA won't allow me to post the link of the rom...but you can find it in the Original Development Thread of the T-Mobile SGS3. Slim-i9300-2.7.0-OFFICIAL is the name of the rom [I copied it directly].
After making a backup of my current rom, installing this rom and installing the new gapps, I rebooted the device and nothing has worked since... [this happened about 12 hours ago].
Now, when I take out the battery and plug the charger in, the notification light becomes solid red. But nothing works...I can't go into download mode, I can't go into recovery. I knew this immediately when the phone did not vibrate after me holding down the power button for a few minutes.
The red notification light only turns on when I plug in the phone when the battery is out. If I put the battery in, after a few moments it goes away. I honestly thought maybe the battery was just dead...but I left it plugged in all night and I still can't do anything with the phone.
Please, any help for me and whtnld would be much appreciated...
Click to expand...
Click to collapse
Easy Way to find out if it's hard bricked is to connect your phone to pc... If pc displays qhsusb - I forget what else then you are hard bricked and need to jtag fix it which should run you around 60 buxs. Sorry bud if that's the case but next time don't flash anything i9300 if you have a t999
Sent from my SGH-T999 using xda app-developers app

chrisram88 said:
Easy Way to find out if it's hard bricked is to connect your phone to pc... If pc displays qhsusb - I forget what else then you are hard bricked and need to jtag fix it which should run you around 60 buxs. Sorry bud if that's the case but next time don't flash anything i9300 if you have a t999
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I rooted my t999 yesterday got rooted but when i tried to flash cwm touch using mobile odin app i think i bricked it because it wont turn on either. Someone is it fixable since it wasnt a rom i tried to flash.

dna420 said:
I rooted my t999 yesterday got rooted but when i tried to flash cwm touch using mobile odin app i think i bricked it because it wont turn on either. Someone is it fixable since it wasnt a rom i tried to flash.
Click to expand...
Click to collapse
Can you boot into download mode? Volume Down + home + power button?
Sent from my SGH-T999

Rom manager is too buggy imo. Goo manager and TWRP recovery is the way to go next time.

Related

[Q] T-Mobile Samsung Galaxy S II soft brick

OK I was trying to flash an unlocked kernal via ODIN last night, something went wrong and now phone is stuck on the phone--!--computer screen. I cannot get past this screen. vol+home+power doesn't do anything but loop to the same screen.
It shows ODIN MODE in red at the top of the screen, but ODIn won't recognize the phone, nor will Kies (not running at the same time). Computer makes USB connected/disconnected sound when I plug and unplug the phone.
I have tried One-Click Unbrick, did not recognize that phone was connected.
Help!!
which model of Galaxy S2 do you have?
T-Mobile SGH-T989
hose902 said:
T-Mobile SGH-T989
Click to expand...
Click to collapse
there''s currently nothing to flash this phone
it came out only 2 days ago
DEV are still working on finding root
so, the best suggestion is to take it back to the store and get it exchanged
or wait a few more days/weeks until a flashable release becomes available to fix the mistake
I know, I was hasty and now this. Even when there something available to flash, the device isn't being recognized by ODIN. Any troubleshooting help for this?
When I managed to get my Vibrant into that mode I could pull the battery, hold volume up, put the battery in, press and release power (still holding volume up) and it'd kick back into download mode everytime. Once in download mode I could plug the USB in and a running ODIN would see it pop up. If ODIN wasn't running and USB was already plugged in things wouldn't work right.
I haven't tried ODIN on the GS2 yet (I'll wait for a root ). I did find the vibrant nearly impossible to brick though... trust me I unexpectedly tried quite hard.
You might need the newest ODIN for GS2 support, and possibly newer drivers.
Hey, Hey, Hey...
My Story...
1. I got a TMO Samsung Galaxy S2
2. Tried to root
3. Used Odin to root and install ROM and referenced the following thread: http://forum.xda-developers.com/showthread.php?t=1095274
4. Realized phone models are not the same
5. Phone does not boot and nothing comes up on the screen
6. No lights or LED indicators (i.e. charging) HOWEVER....
7. ODIN recognizes the phone when I plug in the phone via USB
8. Tried to load stock rom:http://forum.xda-developers.com/showthread.php?t=1321811
9. ODIN gets stuck on <ID:0/005> SetupConnection...
10. I am unable to access SD Card for CWR
11. Next step? Return or exchanges are currently not an option.
Thanks in advance for the assistance!
fix4tv said:
Hey, Hey, Hey...
My Story...
1. I got a TMO Samsung Galaxy S2
2. Tried to root
3. Used Odin to root and install ROM and referenced the following thread: http://forum.xda-developers.com/showthread.php?t=1095274
4. Realized phone models are not the same
5. Phone does not boot and nothing comes up on the screen
6. No lights or LED indicators (i.e. charging) HOWEVER....
7. ODIN recognizes the phone when I plug in the phone via USB
8. Tried to load stock rom:http://forum.xda-developers.com/showthread.php?t=1321811
9. ODIN gets stuck on <ID:0/005> SetupConnection...
10. I am unable to access SD Card for CWR
11. Next step? Return or exchanges are currently not an option.
Thanks in advance for the assistance!
Click to expand...
Click to collapse
I'm a bit new to this, but a custom ROM shouldn't affect your recovery mode. Are you sure you are using the correct buttons and methods to boot recovery?
Might want to make a new thread instead of necroing something from when the phone was 2 days old.
I have GT I9100 and done the same thing and got the same result . stuck at setup connection with odin
Please Help
Go into device manager when is plugged in and if it says qhd-usb or something like that its a hard brick. What tipped me off was you said it makes two noises when you plug in. that's a tell tell sign your hard bricked
Sent from my SGH-T989 using xda premium
soft bricked my phone (i hope)
i have sgh-t989 (t-mobile) i am running a miui rom. it wont boot it just goes to miui boot up screen. i can go to the download mode but not recovery (how do u do that) but when im in downoad mode Odin dosnt recognize my phone. and my computer says it is an unknown device.
tried new wire, uninstalling re-installing kies, stopped all processes, diff computer tried to boot for a day, let battery out for a day, and a few other things.
please help and thank you.
iamnoone626 said:
i have sgh-t989 (t-mobile) i am running a miui rom. it wont boot it just goes to miui boot up screen. i can go to the download mode but not recovery (how do u do that) but when im in downoad mode Odin dosnt recognize my phone. and my computer says it is an unknown device.
tried new wire, uninstalling re-installing kies, stopped all processes, diff computer tried to boot for a day, let battery out for a day, and a few other things.
please help and thank you.
Click to expand...
Click to collapse
You should try to uninstall then reinstall driver, and try another usb port. In my experience, Odin seems to be picky, it only recognizes your phone if you plug it in the usb port that you used in the first time.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Recovery is accessed by holding both vol + and - while starting the phone. Hold them both while pressing the power button, then release the power button when it vibrates, keep holding the vol buttons till you see the recovery screen.
Alarmmy said:
You should try to uninstall then reinstall driver, and try another usb port. In my experience, Odin seems to be picky, it only recognizes your phone if you plug it in the usb port that you used in the first time.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
ok i have done this through kies is there another way that you can do this?
---------- Post added at 09:34 AM ---------- Previous post was at 09:26 AM ----------
nagoshi said:
Recovery is accessed by holding both vol + and - while starting the phone. Hold them both while pressing the power button, then release the power button when it vibrates, keep holding the vol buttons till you see the recovery screen.
Click to expand...
Click to collapse
when i do this it only takes me to download mode.
Have a look at http://forum.xda-developers.com/showthread.php?t=1513359
for a DL link for the USB Drivers
Cheers,
Chris
Sk3tchy said:
Have a look at http://forum.xda-developers.com/showthread.php?t=1513359
for a DL link for the USB Drivers
Cheers,
Chris
Click to expand...
Click to collapse
i tryed this but still odin does not recognize my phone. (no yellow box shows up)

[Q] Possible brick?

Hey there. I've just recently screwed up my phone. (E4GT) Earlier today I was out and about and haven't been home to charge my phone. My battery died. I got home, plugged it up and got a blue flashing light, that flashed every 4 seconds. I figured it could be a battery problem. I left it there to attempt to charge for about an hour and was eventually able to turn it on.
I was planning on taking it to best buy tomorrow to get another battery. So, I powered off my device, loaded download mode and plugged my phone into the USB port of my laptop. My laptop wouldn't recognize my device. I began trying every USB port on my laptop and got nothing. I also tried my desktop and got nothing. I even re-installed drivers and no avail.
I figured I'd go into recovery and do a full wipe and reflash my ROM. (CM9) Incase you are wondering, I am using chris41g Safe CWM6. I have successfully flashed 3 ROMs using his kernel/recovery. I after I reflashed, I got bootlooped. I pulled battery after about 15 min. and tried powering on again. This time I got stuck at splash screen and it didn't go any further. I pulled battery again after about 15 min. and tried going into recovery, and I couldn't get into recovery. I can into download mode but my laptop and my desktop can't recognize my device. So now I'm stuck at splash screen. I've tried everything I possibly could have tried. I tried ODIN, Recovery, ADB, and I can't get anywhere.
Think I bricked?
I don't think you are bricked, at least not hard bricked "phone turns on but only blue light flashes once" is a hard brick. It sounds like things got weird when the phone discharged. Possible a kernal bug? Have tried any of the one clicks to ff18 or el29 or something? Because if your phone can get into download mode , you're technically not bricked.
Sent from my SPH-D710 using xda app-developers app
SkippyDogg said:
I don't think you are bricked, at least not hard bricked "phone turns on but only blue light flashes once" is a hard brick. It sounds like things got weird when the phone discharged. Possible a kernal bug? Have tried any of the one clicks to ff18 or el29 or something? Because if your phone can get into download mode , you're technically not bricked.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Phone won't recognize Laptop or Desktop at all. Even after I reinstalled drivers. Even tried my roommates laptop. Got nothing.
I had the SAME problem on CM9 I was running it for weeks flawlessly then all of the sudden my comp stopped recognizing it. I thought my usb port went bad but I ended up just flashing a different rom, Super nova rom actually and it was back to working flawlessly. If you cant connect the phone to pc to transfer a file to the sd card try using another device like a digital camera or something to transfer the rom. Then flash. That fixed me right up.Damn I didnt realize you said you can no longer get into recovery. Have you tried maually getting into recovery? Power + volume up when phone is off? Try every way you can.
What RB said. You should put everything you need on external SD. If you do not have an SD card reader (so you can read/write to it on a PC), you should get one!
tdunham said:
What RB said. You should put everything you need on external SD. If you do not have an SD card reader (so you can read/write to it on a PC), you should get one!
Click to expand...
Click to collapse
I fixed my problem. I went out and bought another cord for USB port. Guessing all 5 my cords are faulty! Phone is working again now. I restored back to EL29. Just did the OTA to ICS again too. Now I just need to get a new battery.
RB, I've been running CM9 Alpha 6 for about 6-7 days and my phone JUST started to act up. I had the same thing as you but the only thing was I couldn't get into the recovery. Only download mode. Atleast I fixed her.
Mod can close this.

Hard Bricked MY GS2 Needing help

Hi guys what my phone is currently doing is when ever i plug it into the computer it says disk needs to be formated but it kicks off every 2-3 seconds it does that and it just generates a bunch of format windows on my comp. the phone does not turn on, does not go to into recovery nor does it try to boot tried these steps http://forum.xda-developers.com/showthread.php?t=1513359 and more but does nothing except for when i plug the phone into the computer it starts doing what i have described above.
thanks for looking and any information is greatly appreciated.
That sounds like a hard brick for sure. How did it happen? Looks like jtag or warrenty or insurance claim is your only solution.
Sent from my SGH-T989 using xda premium
What happened to cause this issue did you try to root or flash a rom, phone will not go into recovery or download mode?
Sent from my SGH-T989 using xda app-developers app
i had recently updated the recovery because the old one kept acting up and this one did as well like it would take for ever and when i would try to clear the cache it would just be there and do nothing only way was to remove the battery and put it back on but this time i tried to do a format instead of just cache cleaning to get a fresh install but it just never turned back on it had been trying to format for a half hour so i thought that was enough time hmm im wondering how that warranty would go cause the phone is in mint condition.
What did you update it to? And how?
Sent from my SGH-T999 using xda app-developers app
Same issue. Tried to Flash jb aokp unofficial rom and rebooted.
Black screen. going to download mode doesn't work. And I get the same result when i plug into computer
Does the phone respond at all to a charger cable?
Same problem HELPPPPP PLEASE
dtddemon said:
Hi guys what my phone is currently doing is when ever i plug it into the computer it says disk needs to be formated but it kicks off every 2-3 seconds it does that and it just generates a bunch of format windows on my comp. the phone does not turn on, does not go to into recovery nor does it try to boot tried these steps http://forum.xda-developers.com/showthread.php?t=1513359 and more but does nothing except for when i plug the phone into the computer it starts doing what i have described above.
thanks for looking and any information is greatly appreciated.
Click to expand...
Click to collapse
I am having an exactly same issue. I can't turn on the phone, cannot connect to ODIN because when I connect it PC, the DISK FORMAT messages keep popping up. seeking for an solution very bad. If anyone, know how please helppp, I will be very appreciated.
If the phone responds to a charging cable in the wall socket I don't believe it is bricked. And you said it does respond to your computer in some way. Have you tried getting it into download mode and flashing a stock rom? When I had a captivate I thought it was hard bricked but I got it into download mode with a usb jig (my particular captivate did not have 3 button combo to download mode) and used Odin to flash a stock rom and went from there.
Sent from my SGH-T989

[Q] Did i brick my phone?

Ok, so i rooted my phone on my mac from galaxys3root.com
I then decided i wanted to root my phone from windows instead as i thought it was a more stable way (new to rooting)
so i went through the unrooting steps on that same website. downloaded triangle away and reset the binary.
step 2 was to put into download mode, so i help vol down, home and power button. screen went black and thats it.
now phone wont turn on, and wont go into download mode.
am i screwed?
So you were already rooted, then unrooted and tried to root again? Why? As long as the phone is rooted you can flash ROMs regardless of computer, as long as u can get all the files onto ur phone to flash in recovery
Sent from my SGH-I747 using xda app-developers app
DarthDerron said:
So you were already rooted, then unrooted and tried to root again? Why? As long as the phone is rooted you can flash ROMs regardless of computer, as long as u can get all the files onto ur phone to flash in recovery
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
im not sure, im new to rooting.
i thought it wasnt stable or something because rooting through mac you dont go into download mode or recovery mode
(i cant get into download or recovery. My phone is completely off, the only sign of life ive seen from it now is a red led light come on when i plug into usb without the batter in)
can anyone help?
MarkBonz said:
im not sure, im new to rooting.
i thought it wasnt stable or something because rooting through mac you dont go into download mode or recovery mode
(i cant get into download or recovery. My phone is completely off, the only sign of life ive seen from it now is a red led light come on when i plug into usb without the batter in)
Click to expand...
Click to collapse
Then sorry, nothing I can help you with
I suggest taking it to AT&T. That was the only sign of life I had after I dropped my rooted phone, they replaced it under warranty. To be clear, my phone was under two out-of-warranty conditions, and it was replaced because the cause of failure isn't so readily apparent in this case. Just say you don't know why it won't turn on. Too easy.
mag7ear appears
When plugged into my computer, it says
found new hardware QHSUSB_DLOAD
does that mean anything
I think that means it's dead, though I could be mistaken. I'm surprised no one recommended finding a USB jig. They're supposed to force the phone into download mode when nothing else will. It's not clear if that would work in this case, but they're extremely cheap.
MarkBonz said:
When plugged into my computer, it says
found new hardware QHSUSB_DLOAD
does that mean anything
Click to expand...
Click to collapse
Send it to samsung They can fix it for freee.
But for 60 bucks or so JTAG can get it done allittle bit quicker
Before you try sending it away, I would try downloading MSKIP's Galaxy S3 toolkit. Make sure you have all the relevant drivers and see if the toolkit is able to see it and kick it into download mode. You can find the download link here http://forum.xda-developers.com/forumdisplay.php?f=1633
There are very clear, explicit instructions provided with the toolkit - I would also take the time to view wwjoshdew's video, very helpful. If you are able to get the phone into download mode, re-flash a stock, rooted rom from here: http://forum.xda-developers.com/showthread.php?t=1739426
Not sure what else to tell you, but that's what I would try. Hope it helps.
-GB
GladdBag said:
Before you try sending it away, I would try downloading MSKIP's Galaxy S3 toolkit. Make sure you have all the relevant drivers and see if the toolkit is able to see it and kick it into download mode. You can find the download link here http://forum.xda-developers.com/forumdisplay.php?f=1633
There are very clear, explicit instructions provided with the toolkit - I would also take the time to view wwjoshdew's video, very helpful. If you are able to get the phone into download mode, re-flash a stock, rooted rom from here: http://forum.xda-developers.com/showthread.php?t=1739426
Not sure what else to tell you, but that's what I would try. Hope it helps.
-GB
Click to expand...
Click to collapse
thanks anyways, but toolkit cant read phone

Help I think im bricked

So I was using Mobile Odin because I was selling my device and the person didn't want AOKP on it so I went and did what i did on my wife's S3 and used mobile odine to flash stock JB TW (Latest update), for some reason when I did mine, after checking the MD5 the phone said it was all good then it was going to start and after it started the phone when to boot up (im guessing) and nothing happened after this, now my device wont go to DL mode or recovery when I try to use any of the finger combos to go into either of this modes.
As a matter of fact when I press the PWR the device does absolutely nothing..
Any helo is appreciated.
Thanks.
IcOpRo said:
So I was using Mobile Odin because I was selling my device and the person didn't want AOKP on it so I went and did what i did on my wife's S3 and used mobile odine to flash stock JB TW (Latest update), for some reason when I did mine, after checking the MD5 the phone said it was all good then it was going to start and after it started the phone when to boot up (im guessing) and nothing happened after this, now my device wont go to DL mode or recovery when I try to use any of the finger combos to go into either of this modes.
As a matter of fact when I press the PWR the device does absolutely nothing..
Any helo is appreciated.
Thanks.
Click to expand...
Click to collapse
Pull battery put in hold down watever the volume combo is and connect power and see if that does something. If not try adb after holding power for a bit and see if ur device is recognized or anything...
Sent from my SAMSUNG-SGH-I747 using xda premium
howtomen said:
Pull battery put in hold down watever the volume combo is and connect power and see if that does something. If not try adb after holding power for a bit and see if ur device is recognized or anything...
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
I pulled the battery a couple of times and left it out for a minute or even more, and nothing happens when I apply the volume combo. My windows box died last week, so i only have my Mac , Ill look for info on ADB on Mac if theres any.
Thanks.
IcOpRo said:
I pulled the battery a couple of times and left it out for a minute or even more, and nothing happens when I apply the volume combo. My windows box died last week, so i only have my Mac , Ill look for info on ADB on Mac if theres any.
Thanks.
Click to expand...
Click to collapse
If it goes to Odin find your model and carrier image and flash that. You're back to square zero then
zetsui said:
If it goes to Odin find your model and carrier image and flash that. You're back to square zero then
Click to expand...
Click to collapse
Cant get the phone to turn on in any way whatsoever
that doesnt sound good search on some terms like mobile odin black screen and kies at once
Sent from my SGH-I747 using Tapatalk 2
Doesn't sound good at all, might need a jtag. I used Mobile Odin just yesterday to go back to stock from AoCP. No problems whatsoever. I did flash stock 3e recovery before flashing the firmware, not sure if that helped.
When you plug it in does the charging indicator show up? (asking this to see if there are any signs of life, and also in the unlikely event that the problem is a dead battery...)
skrambled said:
Doesn't sound good at all, might need a jtag. I used Mobile Odin just yesterday to go back to stock from AoCP. No problems whatsoever. I did flash stock 3e recovery before flashing the firmware, not sure if that helped.
When you plug it in does the charging indicator show up? (asking this to see if there are any signs of life, and also in the unlikely event that the problem is a dead battery...)
Click to expand...
Click to collapse
Yeah when I plug it in to charge nothing happens, not even the LED lights up, I even put my battery on my wifes GS3 and it has like 40% left on battery and it powered on my wifes phone.

Categories

Resources