Hey there. I've just recently screwed up my phone. (E4GT) Earlier today I was out and about and haven't been home to charge my phone. My battery died. I got home, plugged it up and got a blue flashing light, that flashed every 4 seconds. I figured it could be a battery problem. I left it there to attempt to charge for about an hour and was eventually able to turn it on.
I was planning on taking it to best buy tomorrow to get another battery. So, I powered off my device, loaded download mode and plugged my phone into the USB port of my laptop. My laptop wouldn't recognize my device. I began trying every USB port on my laptop and got nothing. I also tried my desktop and got nothing. I even re-installed drivers and no avail.
I figured I'd go into recovery and do a full wipe and reflash my ROM. (CM9) Incase you are wondering, I am using chris41g Safe CWM6. I have successfully flashed 3 ROMs using his kernel/recovery. I after I reflashed, I got bootlooped. I pulled battery after about 15 min. and tried powering on again. This time I got stuck at splash screen and it didn't go any further. I pulled battery again after about 15 min. and tried going into recovery, and I couldn't get into recovery. I can into download mode but my laptop and my desktop can't recognize my device. So now I'm stuck at splash screen. I've tried everything I possibly could have tried. I tried ODIN, Recovery, ADB, and I can't get anywhere.
Think I bricked?
I don't think you are bricked, at least not hard bricked "phone turns on but only blue light flashes once" is a hard brick. It sounds like things got weird when the phone discharged. Possible a kernal bug? Have tried any of the one clicks to ff18 or el29 or something? Because if your phone can get into download mode , you're technically not bricked.
Sent from my SPH-D710 using xda app-developers app
SkippyDogg said:
I don't think you are bricked, at least not hard bricked "phone turns on but only blue light flashes once" is a hard brick. It sounds like things got weird when the phone discharged. Possible a kernal bug? Have tried any of the one clicks to ff18 or el29 or something? Because if your phone can get into download mode , you're technically not bricked.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Phone won't recognize Laptop or Desktop at all. Even after I reinstalled drivers. Even tried my roommates laptop. Got nothing.
I had the SAME problem on CM9 I was running it for weeks flawlessly then all of the sudden my comp stopped recognizing it. I thought my usb port went bad but I ended up just flashing a different rom, Super nova rom actually and it was back to working flawlessly. If you cant connect the phone to pc to transfer a file to the sd card try using another device like a digital camera or something to transfer the rom. Then flash. That fixed me right up.Damn I didnt realize you said you can no longer get into recovery. Have you tried maually getting into recovery? Power + volume up when phone is off? Try every way you can.
What RB said. You should put everything you need on external SD. If you do not have an SD card reader (so you can read/write to it on a PC), you should get one!
tdunham said:
What RB said. You should put everything you need on external SD. If you do not have an SD card reader (so you can read/write to it on a PC), you should get one!
Click to expand...
Click to collapse
I fixed my problem. I went out and bought another cord for USB port. Guessing all 5 my cords are faulty! Phone is working again now. I restored back to EL29. Just did the OTA to ICS again too. Now I just need to get a new battery.
RB, I've been running CM9 Alpha 6 for about 6-7 days and my phone JUST started to act up. I had the same thing as you but the only thing was I couldn't get into the recovery. Only download mode. Atleast I fixed her.
Mod can close this.
Related
Hi everyone, this is my first post, and I'm completely baffled and think I may have bricked my phone. Here is exactly what happened.
I've been running syndicate rom with vision kernel on my samsung epic 4g on sprint for a very long time. I've been getting the upgrade notification for months, so I finally decided it was time to upgrade. Unfortunately, the way I decided to upgrade was to go back to stock, and then let it naturally upgrade. I followed the instructions at:
http://forum.xda-developers.com/showthread.php?t=1052813
and, the first time I tried to odin, it was stuck at "setup connection", so after waiting a very long time, I unplugged, then re-started odin. because I used the instructions at the above link, I had re-partition, auto-reboot, and reset time checked. This time, odin was able to get past "setup connection", and was stuck on "datafs.rfs" in odin, and on the phone, it no longer showed a downloading logo and looked like it was just off. I unplugged again, and this time, I could not easily get the phone into download mode. I tried a few things with the battery in, with it out, and finally, somehow, got it into download mode again. Trying odin 1.61, I tried again, it got stuck on datafs.rfs again, and after waiting a very long time, I unplugged again.
Now, I believe my phone is bricked. The following is true of my phone right now:
it does not turn on
it does not have any lights when plugged in
if plugged in, it will not go into download mode
if on battery, i can take out the battery, then put it back in, then i can go into download mode, but when in this mode, windows reports an unrecognized usb device. if the battery is in from when it was plugged in, it will not go into download mode. the battery must be popped out and then put back in to go into download mode.
terrible timing too, as my wife is expecting, and she'll most likely need to get in touch with me in the next week or two. If anyone can help me get my phone working again, that would be amazing. Thanks in advance for your help.
dmachine2 said:
Hi everyone, this is my first post, and I'm completely baffled and think I may have bricked my phone. Here is exactly what happened.
I've been running syndicate rom with vision kernel on my samsung epic 4g on sprint for a very long time. I've been getting the upgrade notification for months, so I finally decided it was time to upgrade. Unfortunately, the way I decided to upgrade was to go back to stock, and then let it naturally upgrade. I followed the instructions at:
http://forum.xda-developers.com/showthread.php?t=1052813
and, the first time I tried to odin, it was stuck at "setup connection", so after waiting a very long time, I unplugged, then re-started odin. because I used the instructions at the above link, I had re-partition, auto-reboot, and reset time checked. This time, odin was able to get past "setup connection", and was stuck on "datafs.rfs" in odin, and on the phone, it no longer showed a downloading logo and looked like it was just off. I unplugged again, and this time, I could not easily get the phone into download mode. I tried a few things with the battery in, with it out, and finally, somehow, got it into download mode again. Trying odin 1.61, I tried again, it got stuck on datafs.rfs again, and after waiting a very long time, I unplugged again.
Now, I believe my phone is bricked. The following is true of my phone right now:
it does not turn on
it does not have any lights when plugged in
if plugged in, it will not go into download mode
if on battery, i can take out the battery, then put it back in, then i can go into download mode, but when in this mode, windows reports an unrecognized usb device. if the battery is in from when it was plugged in, it will not go into download mode. the battery must be popped out and then put back in to go into download mode.
terrible timing too, as my wife is expecting, and she'll most likely need to get in touch with me in the next week or two. If anyone can help me get my phone working again, that would be amazing. Thanks in advance for your help.
Click to expand...
Click to collapse
Windows not recognizing a device means you don't have the proper drivers installed. I'd link them to you but I'm at work on my phone. Search google for samsung epic drivers. Or i believe you can even get them from samsung's website.
And Congratulations on the new baby.
Sent from a CM9 powered Epic.
the link you posted has all the best instructions. Do not skip a step or circumvent any. Use the file links he has provided. And use Odin 1.85.
Take the battery out of your phone let it sit for at least 20 minutes, leave the battery out plug it into computer and attempt to get it into download mode.
Very important your not using the Samsung stock charging cable to do this. You need a good USB cable, one like the Blackberry phones come with, which is designed for heavy data transfer
Good luck.
Sent from my MTD Epic 4G SGS using Tapatalk
The problem and the cause of your woes is a faulty cable. Get a heavy duty blackberry cable and try again. This time leave the battery out, using the cord as power put it into download mode with Odin already up on the computer and make sure to use the same port that it has been working in.
kennyglass123 said:
The problem and the cause of your woes is a faulty cable. Get a heavy duty blackberry cable and try again. This time leave the battery out, using the cord as power put it into download mode with Odin already up on the computer and make sure to use the same port that it has been working in.
Click to expand...
Click to collapse
Hey I said the same exact thing....:thumbup:
Sent from my MTD Epic 4G SGS using Tapatalk
edfunkycold said:
Hey I said the same exact thing....:thumbup:
Sent from my MTD Epic 4G SGS using Tapatalk
Click to expand...
Click to collapse
I know...saw it after I posted...lol. Plus you included the best link..nice!
Sent from my SPH-D700 using xda premium
I actually tried a differnt cable because of the original link the first time, and that didn't work at all (used my wife's evo shift cable). But, I did find yet another micro usb cable in the house, and that one does seem to be working. Although, the odin flash does not seem to be, seems to be hanging (and the phone shows just blue across the entire screen), but that is progress =) Thanks for the tips everyone. I'll post my findings if I am successful in un-bricking. (or post where i get stuck next =P) Thanks again everyone.
When you get stuck again, Odin with the battery and sd card out.
Already took the SD card out. I can't go into download mode with just the cable though (already tried). Any recommendations? To get into download mode currently, I have to:
unplug everything
take out the battery
pop the battery back in
then, 1+power to download mode.
dmachine2 said:
Already took the SD card out. I can't go into download mode with just the cable though (already tried). Any recommendations? To get into download mode currently, I have to:
unplug everything
take out the battery
pop the battery back in
then, 1+power to download mode.
Click to expand...
Click to collapse
Sounds like either the cable still has issues or the USB port is not properly powered. If a desktop, use the USB ports in the rear right on the motherboard. I see you have had different results from different cables already, if you can just get ahold of a heavy duty Blackberry or Palm Pre cable.
How long should I wait before re-trying a new flash? It's been stuck on cache.rfs for the past 2 or 3 hours. I'll try the back usb port instead of front usb ports. I'll also try a palm cable, I think I have one lying around somewhere. Thanks for the tips.
dmachine2 said:
How long should I wait before re-trying a new flash? It's been stuck on cache.rfs for the past 2 or 3 hours. I'll try the back usb port instead of front usb ports. I'll also try a palm cable, I think I have one lying around somewhere. Thanks for the tips.
Click to expand...
Click to collapse
Yeah, it is time to try again with those tips. 15 minutes is max.
SUCCESS!!
Following the original link, what I had to do was:
I plugged into rear usb
still wouldn't go into download mode, so unplugged, popped in battery, went into download mode, plugged in
started odin 1.61 (as in the trouble shooting part of the original link)
Used EC05 rom (as in the trouble shooting part of the original link)
my phone is back from the dead! Thanks for the help everyone.
Congrats man!
nice!
+10 char
Just got back here and I also am glad you got it going. Congrats! These Epics are almost unbrickable...
Sent from my MTD Epic 4G SGS using Tapatalk
Im new to the forum, and i need help on how to fix my Samsung Epic 4g..
I updated OTA to fimware 2.3.6 baseband S700.0.5S.FC09 kernel 2.6.35.7(nothing else besides the numbers on kernel) build GINGERBREAD.FC09..
Problems with (usb connected, not showing on computer via usb, no sd when trying to install incrypted certificates, and the one that bothers me the most is when i click on camera app, the phone just shuts off even if i press the camera button on the side. And when i turn it on, first thing that shows up is a blurry/ fuzzy SAMSUNG for like 3 seconds then looks normal until i get to the menu.) Most of these problems are only when the sd card is inserted..
I cant get it to connect with my computer, i installed drivers, changed usbs, i download odin and still will not show up, i did factory resets and rebooted the phone many times.
All this started happening after i got to turn on in the first place. Because it wouldnt even turn on at all, or show that it was charging. So i left it on charge over night and took out the battery. Then it turned on and back off until finally now it only turns off in camera mode
it sounds like a bad flash try odining back to el30 and get a fresh start i noticed odining to back to stock every now and then makes the phone a lot quicker even for a stock firmware
Reefsta said:
Im new to the forum, and i need help on how to fix my Samsung Epic 4g..
I updated OTA to fimware 2.3.6 baseband S700.0.5S.FC09 kernel 2.6.35.7(nothing else besides the numbers on kernel) build GINGERBREAD.FC09..
Problems with (usb connected, not showing on computer via usb, no sd when trying to install incrypted certificates, and the one that bothers me the most is when i click on camera app, the phone just shuts off even if i press the camera button on the side. And when i turn it on, first thing that shows up is a blurry/ fuzzy SAMSUNG for like 3 seconds then looks normal until i get to the menu.) Most of these problems are only when the sd card is inserted..
I cant get it to connect with my computer, i installed drivers, changed usbs, i download odin and still will not show up, i did factory resets and rebooted the phone many times.
All this started happening after i got to turn on in the first place. Because it wouldnt even turn on at all, or show that it was charging. So i left it on charge over night and took out the battery. Then it turned on and back off until finally now it only turns off in camera mode
Click to expand...
Click to collapse
Get a big blackberry cord. The stock samsung micro usb cord sucks for data transfer.
Also try different ports on your computer. Then if you can get it in download mode and odin see's it flash fc09.tar file. Look in the development section you should be able to find a thread that has it.
Or youtube qbking77 and find the video you need.
Sent from My Epic Ice Cream Sandwich With Sprinkles!!!
The other thing that would help is an actual subject.
Add a title and more people will see it and help.
Thanks
FNM
Sent from my PantechP4100 using xda premium
Hi guys what my phone is currently doing is when ever i plug it into the computer it says disk needs to be formated but it kicks off every 2-3 seconds it does that and it just generates a bunch of format windows on my comp. the phone does not turn on, does not go to into recovery nor does it try to boot tried these steps http://forum.xda-developers.com/showthread.php?t=1513359 and more but does nothing except for when i plug the phone into the computer it starts doing what i have described above.
thanks for looking and any information is greatly appreciated.
That sounds like a hard brick for sure. How did it happen? Looks like jtag or warrenty or insurance claim is your only solution.
Sent from my SGH-T989 using xda premium
What happened to cause this issue did you try to root or flash a rom, phone will not go into recovery or download mode?
Sent from my SGH-T989 using xda app-developers app
i had recently updated the recovery because the old one kept acting up and this one did as well like it would take for ever and when i would try to clear the cache it would just be there and do nothing only way was to remove the battery and put it back on but this time i tried to do a format instead of just cache cleaning to get a fresh install but it just never turned back on it had been trying to format for a half hour so i thought that was enough time hmm im wondering how that warranty would go cause the phone is in mint condition.
What did you update it to? And how?
Sent from my SGH-T999 using xda app-developers app
Same issue. Tried to Flash jb aokp unofficial rom and rebooted.
Black screen. going to download mode doesn't work. And I get the same result when i plug into computer
Does the phone respond at all to a charger cable?
Same problem HELPPPPP PLEASE
dtddemon said:
Hi guys what my phone is currently doing is when ever i plug it into the computer it says disk needs to be formated but it kicks off every 2-3 seconds it does that and it just generates a bunch of format windows on my comp. the phone does not turn on, does not go to into recovery nor does it try to boot tried these steps http://forum.xda-developers.com/showthread.php?t=1513359 and more but does nothing except for when i plug the phone into the computer it starts doing what i have described above.
thanks for looking and any information is greatly appreciated.
Click to expand...
Click to collapse
I am having an exactly same issue. I can't turn on the phone, cannot connect to ODIN because when I connect it PC, the DISK FORMAT messages keep popping up. seeking for an solution very bad. If anyone, know how please helppp, I will be very appreciated.
If the phone responds to a charging cable in the wall socket I don't believe it is bricked. And you said it does respond to your computer in some way. Have you tried getting it into download mode and flashing a stock rom? When I had a captivate I thought it was hard bricked but I got it into download mode with a usb jig (my particular captivate did not have 3 button combo to download mode) and used Odin to flash a stock rom and went from there.
Sent from my SGH-T989
Yesterday i rooted and tried to install a Rom and used Rom manager to go into recovery mode. I thought you had to do the down+home+power and now when I try to do anything it wont work power button 20 sec , power+home , up/down+power+home,nothing.When i tried plug it into the computer it makes that sound when something failed to connect to the pc. When i tried holding the power button i hear the sound of the device successfully connect to the pc but when i look theres no phone on the computer and when i let go of the power button it stops. Any help would be very much appreciated and i will never do anything to risk my device being broken again...
What did you install? Link the ROM or at least the name of the ROM.
Sent from my SGH-T999 using xda premium
mt3g said:
What did you install? Link the ROM or at least the name of the ROM.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I didnt install anything all i did was use rom manager to go into recovery mode i was trying to install a jelly bean rom but recovery mode never showed up
Did you modify your build.prop?
Can you still access the download mode? If yes try to flash back a stock rom with odin.
Or remove the battery and try again to boot up in download mode.
Max) said:
Can you still access the download mode? If yes try to flash back a stock rom with odin.
Or remove the battery and try again to boot up in download mode.
Click to expand...
Click to collapse
No i cant acess anything download mode or clockwork recovery , cant connecty to pc cant turn on just a black screen...
Its volume up&home button&power you will see little blue text in the top left let go of buttons.
Sent from my SGH-T999 using xda premium
Try a different usb slot sometimes a usb slot may malfunction I had that problem.
Also don't use a usb extender hub if you are it may screw with the voltage.
a new usb I'm sure you've heard that one but this has the least chance of working because you the s3 makes the noise which means the usb works
Try a new computer and check that you have Kies installed
Try to restart the laptop that also helps
Hope I helped you out
Sent from my SGH-T999V using xda premium
Which Rom were u trying to flash be specific.
Sent from my SGH-T999 using xda premium
Unfortunately, I have this exact same problem. I'm really scared that I may have bricked my device...
The last time my phone was working, I simply updated my phone to CM10's latest update for the phone. Everything was working perfectly fine. All I did was download the latest rom from get.cm for my sgs3.
Then I read online that this new 4.1.2 rom came out. As a new member XDA won't allow me to post the link of the rom...but you can find it in the Original Development Thread of the T-Mobile SGS3. Slim-i9300-2.7.0-OFFICIAL is the name of the rom [I copied it directly].
After making a backup of my current rom, installing this rom and installing the new gapps, I rebooted the device and nothing has worked since... [this happened about 12 hours ago].
Now, when I take out the battery and plug the charger in, the notification light becomes solid red. But nothing works...I can't go into download mode, I can't go into recovery. I knew this immediately when the phone did not vibrate after me holding down the power button for a few minutes.
The red notification light only turns on when I plug in the phone when the battery is out. If I put the battery in, after a few moments it goes away. I honestly thought maybe the battery was just dead...but I left it plugged in all night and I still can't do anything with the phone.
Please, any help for me and whtnld would be much appreciated...
@OP
Did you mod the build.prop for any reason? (Google wallet maybe?)
If you did and then tried to update/install recovery through Rom Manager, it may have tried to install the wrong recovery on the wrong partition, resulting in a hard brick.
Sent from my SGH-T999 using xda app-developers app
jeikei4life said:
Unfortunately, I have this exact same problem. I'm really scared that I may have bricked my device...
The last time my phone was working, I simply updated my phone to CM10's latest update for the phone. Everything was working perfectly fine. All I did was download the latest rom from get.cm for my sgs3.
Then I read online that this new 4.1.2 rom came out. As a new member XDA won't allow me to post the link of the rom...but you can find it in the Original Development Thread of the T-Mobile SGS3. Slim-i9300-2.7.0-OFFICIAL is the name of the rom [I copied it directly].
After making a backup of my current rom, installing this rom and installing the new gapps, I rebooted the device and nothing has worked since... [this happened about 12 hours ago].
Now, when I take out the battery and plug the charger in, the notification light becomes solid red. But nothing works...I can't go into download mode, I can't go into recovery. I knew this immediately when the phone did not vibrate after me holding down the power button for a few minutes.
The red notification light only turns on when I plug in the phone when the battery is out. If I put the battery in, after a few moments it goes away. I honestly thought maybe the battery was just dead...but I left it plugged in all night and I still can't do anything with the phone.
Please, any help for me and whtnld would be much appreciated...
Click to expand...
Click to collapse
You flashed an intl rom. Hard bricked. Need JTAG repair or replace unit.
I was about to say, isn't the i9300 the intl version? the tgh-t999 is the TMOUS version.
You have to let go of the power button to get into recovery.
jeikei4life said:
Unfortunately, I have this exact same problem. I'm really scared that I may have bricked my device...
The last time my phone was working, I simply updated my phone to CM10's latest update for the phone. Everything was working perfectly fine. All I did was download the latest rom from get.cm for my sgs3.
Then I read online that this new 4.1.2 rom came out. As a new member XDA won't allow me to post the link of the rom...but you can find it in the Original Development Thread of the T-Mobile SGS3. Slim-i9300-2.7.0-OFFICIAL is the name of the rom [I copied it directly].
After making a backup of my current rom, installing this rom and installing the new gapps, I rebooted the device and nothing has worked since... [this happened about 12 hours ago].
Now, when I take out the battery and plug the charger in, the notification light becomes solid red. But nothing works...I can't go into download mode, I can't go into recovery. I knew this immediately when the phone did not vibrate after me holding down the power button for a few minutes.
The red notification light only turns on when I plug in the phone when the battery is out. If I put the battery in, after a few moments it goes away. I honestly thought maybe the battery was just dead...but I left it plugged in all night and I still can't do anything with the phone.
Please, any help for me and whtnld would be much appreciated...
Click to expand...
Click to collapse
Easy Way to find out if it's hard bricked is to connect your phone to pc... If pc displays qhsusb - I forget what else then you are hard bricked and need to jtag fix it which should run you around 60 buxs. Sorry bud if that's the case but next time don't flash anything i9300 if you have a t999
Sent from my SGH-T999 using xda app-developers app
chrisram88 said:
Easy Way to find out if it's hard bricked is to connect your phone to pc... If pc displays qhsusb - I forget what else then you are hard bricked and need to jtag fix it which should run you around 60 buxs. Sorry bud if that's the case but next time don't flash anything i9300 if you have a t999
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I rooted my t999 yesterday got rooted but when i tried to flash cwm touch using mobile odin app i think i bricked it because it wont turn on either. Someone is it fixable since it wasnt a rom i tried to flash.
dna420 said:
I rooted my t999 yesterday got rooted but when i tried to flash cwm touch using mobile odin app i think i bricked it because it wont turn on either. Someone is it fixable since it wasnt a rom i tried to flash.
Click to expand...
Click to collapse
Can you boot into download mode? Volume Down + home + power button?
Sent from my SGH-T999
Rom manager is too buggy imo. Goo manager and TWRP recovery is the way to go next time.
I've owned my SGII since release, went through a few roms, never had any issues. I have been running liquidsmooth for a month or two, without much issue. Although, lately stablity has dropped off a little. Nothing bad, just a freeze every few days and other minor hiccups.
Then something bad happened.... Last night I was using the phone and it turned off. Then it wouldn't boot. Battery pull, and rebooted but no joy. Then I booted to recovery (TWRP, but I'm not sure which version) and found that it said something along the lines of "E: could not mount /system", along with lots of other similar failure to mount messages. Oh well, I guess I'll just wipe it and flash something new. Any attempt to wipe would hang and then the phone would turn off after a few minutes.
Then I went to flash the stock setup from odin (using the howto from the dev section) , but it too would fail every time. I even tried different builds from samsung's official roms, but they all would fail to install on the phone. I read every thread I could find, and the next thing to try seemed to be an emergency recovery through Kies. That also failed, except it left my phone hard bricked. I can't get into download or anything, nothing shows in the device manager, just completely dead... I made a USB jig, but no luck there either.
I'm completely frustrated... I don't know what to do now... Buy a MB from ebay? The phone was flawless before all this. Any suggestions? I'm using a blackberry pearl for now, I can't let that happen.
Have you tried the Jig on another Samsung phone so you know the one you made physically works?
Some people have managed to get into DL Mode by pulling the battery, SIM, SD, etc. For 5 - 10 minutes then connecting it to the pc with Odin running b4 inserting the battery to enter DL Mode.
Otherwise mobiletechvideos has a really good reputation and turn around time for JTag service.
There is a chance its a hardware problem, and hopefully another member on here can shed some light on the possibility of it being a HW issue or not..
Cheers,
Chris
Thanks for the suggestions. I don't have another samsung phone to try the jig with, but I'll see if I can get a friend to let me hook up this crazy looking thing. I got the resistors set up to 299K, hoped that would be close enough, but perhaps not.
I tried that plug-first-battery-second trick to get into DL mode, but that's not working either.
I looked at the jtag service too, but my fear is that I have corrupted memory. In that case, I wouldn't get a refund if I still couldn't get to a fully healthy boot. It seems odd though... not like it's a common trend for this particular model (that I've seen).
Just seems so strange that it happened for no apparent reason... before it was hard bricked I was able to USB mount the internal storage and access and transfer almost all the contents, except for one folder. I wonder if that one part of the memory caused all the problems?
Again, thanks for the suggestions. I'll keep plugging away at anything that might help, and in the mean time I guess I'll keep my eyes out for broken phones or some way to salvage a board.
If im not mistaken, a hard brick should show up in you device manager as the board itself when connected.
Does anything show in you device manager when its connected? And have you tried using a different PC which has never had Kies installed on it, where you just install the drivers for the T989?
Odin tends to fail at the modem or due to the presence of a .PIT
I got myself out of a brick which started over the a very similar issue, but due to a bad flash.
After 5 hrs of getting nowhere (I was using a Jig) I would get Odin to recognize the phone (My Screen was NOT displaying the DL Mode screen, It was going into DL Mode but other than Odin recognizing it, there were no signs of life!) after enought tries but flashing to stock would fail. I ended up taking a shot at flashing the stock kernel using 512.Pit from a T959, Reflashing the same Kernel, then flashing recovery. I don't advise anyone do this as that PIT file is NOT for a T989, and it may have been BS luck not the use of that PIT file that did the trick.
But I did get it back running %100
Good tips, thanks! Were you using the jig to get the phone into the black screen download mode?
I hadn't tried another PC, although I did make sure any Kies processes were disabled. I just tried another computer, but still nothing gets recognized. Oddly enough, not even the basic "hard brick" USB driver shows up in the device manager.
Thanks for the additional ideas.
This happen to me before, I just cleared cache and Davik then rebooted recovery then flashed another Rom.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Unfortunately for me, since data, cache, and system couldn't be mounted, I couldn't successfully clear them.
KLR Rico said:
Good tips, thanks! Were you using the jig to get the phone into the black screen download mode?
I hadn't tried another PC, although I did make sure any Kies processes were disabled. I just tried another computer, but still nothing gets recognized. Oddly enough, not even the basic "hard brick" USB driver shows up in the device manager.
Thanks for the additional ideas.
Click to expand...
Click to collapse
I would put the jig in with the battery and everything still removed, and alot of trial and error trying things like battery first then connecting the cable with Odin always being already running. Then doing the reverse, etc.
When I did get Odin to recognize the phone, one thing I learnt is when it would detect, it only ever happened after having killed and reopened Odin. I have no explanation on why using "End Task" after each attempt to connect and opening Odin again made a difference but it did.
Have you had a look at the QPST thread? I would ask one of the members contributing to it about why you would or would not see the board. And you could always try installing the boards drivers manually, or enable "Show hidden devices" in your device manager.....
Did you contact the guys at mobiletechvideos and explain the details?
You were able to boot to recovery, so it sounds partition related. But I would try just to flash the stock UVLH1 kernel and recovery with Odin vs full stock rom if you do get it to detect. And if it does detect with Odin eventually do not let it reboot or loose power. Just Kill Odin, unplug the cable if you need to, Start Odin again and reconnect the cable. Once in DL Mode it will stay in DL Mode as long as you have the reboot option in Odin unchecked, etc.
Also if you can get the battery charged fully somehow, your best shot is with a fully charged battery.
Chris