Develop Bugs

Slight issue with Franco Kernel !

So i am running LiquidSmooth JB v2.0 ROM and i've been wanting to run a proper Franco Kernel. Here is why i say "proper."
After i do a wipe data/cache and dalvik, i'd flash the LiquidSmooth Rom. After flashing ROM i would flash the Franco.kernel r241-384GPU which would install successfully. Great! After booting up successfully, i would check in the "About phone" section to see if Franco.kernel was the version running but it says "unavailable" though it supposedly flashed without a problem and installed app updates. I then tried Franco.kernel r241-512GPU and same issue.
So i don't know if i am running the Kernel correctly and it's just telling me im not... or am i really not running a kernel?
Heres a screenshot.

jeremyt727 said:
So i am running LiquidSmooth JB v2.0 ROM and i've been wanting to run a proper Franco Kernel. Here is why i say "proper."
After i do a wipe data/cache and dalvik, i'd flash the LiquidSmooth Rom. After flashing ROM i would flash the Franco.kernel r241-384GPU which would install successfully. Great! After booting up successfully, i would check in the "About phone" section to see if Franco.kernel was the version running but it says "unavailable" though it supposedly flashed without a problem and installed app updates. I then tried Franco.kernel r241-512GPU and same issue.
So i don't know if i am running the Kernel correctly and it's just telling me im not... or am i really not running a kernel?
Heres a screenshot.
Click to expand...
Click to collapse
That is a known issue with some ROMS, not a big deal you are running the correct kernel. You can verify by downloading cpuspy it lists your kernel also. I have the same situation and have been using Franco Kernel for a long time
Sent from my Nexus 7 using Tapatalk 2

dascjb said:
That is a known issue with some ROMS, not a big deal you are running the correct kernel. You can verify by downloading cpuspy it lists your kernel also. I have the same situation and have been using Franco Kernel for a long time
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Woah! Awesome. Thanks for your help man! :good:

Must be an issue with that ROM. Because mine shows.
Sent From My Toro+ via Tapatalk

I believe it is an issue in ROMS that are using any cm10 tweaks in settings
Sent from my Nexus 7 using Tapatalk 2

[Q] What is the best Touchwiz rom for T989?

What is the best Touchwiz 5 rom. I have tried Jedi Jelly 6 but it doesn't provide me with a stock Touchwiz rom. Any suggestions?

funbulton said:
What is the best Touchwiz 5 rom. I have tried Jedi Jelly 6 but it doesn't provide me with a stock Touchwiz rom. Any suggestions?
Click to expand...
Click to collapse
as of now. i would say Jedi Mind Trick v6 or rooted stock rom

funbulton said:
What is the best Touchwiz 5 rom. I have tried Jedi Jelly 6 but it doesn't provide me with a stock Touchwiz rom. Any suggestions?
Click to expand...
Click to collapse
EMBRYO 6.11, best twiz ROM available!! Hands down jmt has nothing on it...
Sent from my SGH-T989 using xda premium

Infamous and northern infamous.
Sent from my cell phone telephone

Oh the agony... my birthday was the 29th haha.:sly:

Infamous with arc kernel or cl3kener stock speedy touchwiz ROM with his Tiberius nightly kernel

embryo 7 off the skyrocket forums..imo its worth flashing the 7 over 6.11. flash tiberious latest nightly nd u get s2w bln nd all that gud stuf

JesusWazBlack said:
embryo 7 off the skyrocket forums..imo its worth flashing the 7 over 6.11. flash tiberious latest nightly nd u get s2w bln nd all that gud stuf
Click to expand...
Click to collapse
Have to flash the rotation fix too right?
Sent from my SGH-T989 using xda app-developers app

SukDeezNutz said:
Have to flash the rotation fix too right?
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Nope since u flashed Tiberius . its all good

JesusWazBlack said:
Nope since u flashed Tiberius . its all good
Click to expand...
Click to collapse
Do you have a link to Embryo 7 that works for T989? All i found on our forum is 6.11. I found and downloaded 7 from the skyrocket forum but it wouldnt boot, even after flashing tiberious.

Embryo 7 is only the att skyrocket forums, so if you flash that ROM you would need a tmobile radio and a t989 kernel for our phone if you want you can grab it here http://forum.xda-developers.com/showthread.php?t=2275630 and im sure @soupysoup would be happy to help if you have anymore questions about the ROM as if im correct he loves that ROM

SukDeezNutz said:
Do you have a link to Embryo 7 that works for T989? All i found on our forum is 6.11. I found and downloaded 7 from the skyrocket forum but it wouldnt boot, even after flashing tiberious.
Click to expand...
Click to collapse
Did you wipe system and data? Do you have newest radio installed? You flashed rom, then t989 4.1.2 kernel before rebooting. Make sire you flashed proper kernel. Nora 4.2.2 kernel. And wipe cache and davlik after flashing those 2 then reboot? And no gapps required.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

kj2112 said:
Did you wipe system and data? Do you have newest radio installed? You flashed rom, then t989 4.1.2 kernel before rebooting. Make sire you flashed proper kernel. Nora 4.2.2 kernel. And wipe cache and davlik after flashing those 2 then reboot? And no gapps required.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
I wiped everything, flashed ROM then Tiberius kernel. Stuck at boot screen. I'll try flashing the kernel you reference and the newest radio with it and see if that works.
Sent from my SGH-T989 using xda app-developers app
---------- Post added at 08:56 AM ---------- Previous post was at 08:35 AM ----------
kj2112 said:
Did you wipe system and data? Do you have newest radio installed? You flashed rom, then t989 4.1.2 kernel before rebooting. Make sire you flashed proper kernel. Nora 4.2.2 kernel. And wipe cache and davlik after flashing those 2 then reboot? And no gapps required.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
It needs to be a 4.1.2 kernel right? I'm flashing the Tibirious TW kernel.

SukDeezNutz said:
I wiped everything, flashed ROM then Tiberius kernel. Stuck at boot screen. I'll try flashing the kernel you reference and the newest radio with it and see if that works.
Sent from my SGH-T989 using xda app-developers app
---------- Post added at 08:56 AM ---------- Previous post was at 08:35 AM ----------
It needs to be a 4.1.2 kernel right? I'm flashing the Tibirious TW kernel.
Click to expand...
Click to collapse
Pretty sure embryo is 4.1.2....so yes. Try infamous 4.1.2 kernel too of you still have issues. In our dev section. And the new T-Mobile or Telus radios are all that will work.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

kj2112 said:
Pretty sure embryo is 4.1.2....so yes. Try infamous 4.1.2 kernel too of you still have issues. In our dev section. And the new T-Mobile or Telus radios are all that will work.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
I got it to boot and have good service, but i cant sign into my google account. I put in my email and password click next, it seems like its thinking, then kicks me back to the sign in page again???

SukDeezNutz said:
I got it to boot and have good service, but i cant sign into my google account. I put in my email and password click next, it seems like its thinking, then kicks me back to the sign in page again???
Click to expand...
Click to collapse
Can you skip it and check your apn settings? They probably need to be entered manually. Did for me on Telus anyway.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Is there a tw 4.2.2 rom for the t989? I doubt it but worth a question haha

gabriel1946 said:
Is there a tw 4.2.2 rom for the t989? I doubt it but worth a question haha
Click to expand...
Click to collapse
No the only phone running 4.2.2 tw is the s4 and they haven't released any source yet, so until we see that there's no hope
Sent from my SAMSUNG-SGH-T989 using xda premium

soupysoup said:
No the only phone running 4.2.2 tw is the s4 and they haven't released any source yet, so until we see that there's no hope
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Imma revert back to tw for a bit dam flashing habit lol have u found a good s4 or ink effect lockscreen mod?

gabriel1946 said:
Imma revert back to tw for a bit dam flashing habit lol have u found a good s4 or ink effect lockscreen mod?
Click to expand...
Click to collapse
No haven't found any s4 lockscreen that actually works lol, but I do know with embryo and the icon themer u won't know ur on an s2, its got the s4 svoice app (and it works) wallpapers everything, and its very fast I benchmark high 11s every time, stable too, embryo 7 is nice too but I can't get over the skyrocket fingerprint lol
Sent from my SAMSUNG-SGH-T989 using xda premium

[Q] Overclocking

I have the AT&T S3 running an 4.2.2 aosp custom rom "jellybam" and i really want to overclock but in the Performance Control it only lets me go to 1512MHz. Can some1 plz help me overclock it but still keep my rom.

Flash this kernel
http://forum.xda-developers.com/showthread.php?p=28399829

It's kernel related. You have to find kernel that support higher overclock.
Sent from my GT-I9300 using xda app-developers app

There is various kernels in the Original development thread that support overclock.
Make sure yo read the OP and figure out which is best for you and your phone.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

So i downloaded the file on my s3 booted into recovery and flashed it then i got stuck in a boot loop. I restored my phone but now what did i flash it wrong?
Sent from my SAMSUNG-SGH-I747 using xda premium

tylerray0040 said:
So i downloaded the file on my s3 booted into recovery and flashed it then i got stuck in a boot loop. I restored my phone but now what did i flash it wrong?
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Could be a few issues.
You could be on an old version of JellyBam that does not use the 3.4 kernel. You also could have downloaded the wrong kernel from the page linked. If you could give us your ROM version that would help.

Its 7.5.0
But do u have to flash a kernel with odin
Sent from my SAMSUNG-SGH-I747 using xda premium

tylerray0040 said:
Its 7.5.0
But do u have to flash a kernel with odin
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Kernels are flashed in recovery, not Odin. The problem may be the recent display changes in KT's kernel. You may want to check his thread for an earlier build (pre 4/19) before the display commits were added.

CamFlawless said:
Kernels are flashed in recovery, not Odin. The problem may be the recent display changes in KT's kernel. You may want to check his thread for an earlier build (pre 4/19) before the display commits were added.
Click to expand...
Click to collapse
correct. flash his 4/11 release.
and if you ever find yourself in a bootloop from flashing the wrong kernel, just flash the correct kernel in recovery. wipe cache/dalvik, fix permissions and reboot. good to go without having to restore or reset anything.
also, i'd stick with ROMs in this forum that are supported by the dev.

Closing this one...as OP has posted duplicate thread here...http://forum.xda-developers.com/showthread.php?t=2246321

[Q] OverClock

I am running jellybam 7.5.0, an aosp 4.2.2 rom and i want to overclock my s3 but whenever i go to peformence control it only lets me go to 1512MHz. Can someone find me a kernel that works with this rom cuz i really like the rom and want to keep it and i also really want to overclock. PLZ help me!!!!

Kernels that support overclocking on aosp 4.2.2 roms can be found in the Original Android Development section. You probably won't find much help on xda with jellybam.

xBeerdroiDx said:
Kernels that support overclocking on aosp 4.2.2 roms can be found in the Original Android Development section. You probably won't find much help on xda with jellybam.
Click to expand...
Click to collapse
Can you see if you can find one. Ive looked just cant. on jellybams website they said any aosp compatible will do.

tylerray0040 said:
Can you see if you can find one. Ive looked just cant. on jellybams website they said any aosp compatible will do.
Click to expand...
Click to collapse
You will need one of these two. Depending. In their change log it is not clear if the ROM is based on Linux 3.0 or Linux 3.4 kernel.
KT747:
Aosp 4.2.2 Linux 3.0:
http://www.mediafire.com/?tsoe7rxqhlabpcd
Aosp 4.2.2 Linux 3.4:
http://www.mediafire.com/?851bd2h5r571xi3
Try the 3.4 first if it doesn't boot, reboot in recovery and flash the 3.0.

OK so i downloaded it went into recovery flashed 1 then cleared chache then dalvik then i fixed permissions then when i rebooted it just went to a blank screen. it did this for both kernels l. plz tell me what I'm doing wrong.
Sent from my SAMSUNG-SGH-I747 using xda premium

tylerray0040 said:
OK so i downloaded it went into recovery flashed 1 then cleared chache then dalvik then i fixed permissions then when i rebooted it just went to a blank screen. it did this for both kernels l. plz tell me what I'm doing wrong.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
is jellybam a 3.0 kernel based rom or 3.4?
for 3.4, try flashing the 4/11 release

Whats the 4/11 release
Sent from my SAMSUNG-SGH-I747 using xda premium

tylerray0040 said:
Whats the 4/11 release
nt. nt from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
You really need to find out what kernel this rom supports.
You could also flash the rom again and wipe bothe caches

If I were you I would switch to root box because jellybam is dead now. Try to find the root box nightly in the original development forum. Find the date 4/5 meaning 5th of april . with that I would flash the KT kernel with is also found in original development but download the Linux 3.4 version and flash that with the 4/05 nightly

jellybam is not supported in XDA, nor are duplicate postings of the same issues amongst multiple threads.
This thread is now closed.

[ROM] RootBox [Unofficial Nightlies]

Code:
Built from source using [URL="https://github.com/Root-Box"]RootBox Repos[/URL] and [URL="https://github.com/victorator"]My Repos[/URL].
Feel free to use my repo to build your own roms.
Hi Guys!
Since the jflte family of devices is almost exactly the same I thought I would post my I9505 (jflte) Rom here for you as well!
It has been tested by jfltetmo and jfltecan users and is confirmed working!
To install it, just download the I9505 rom and then flash the appropriate device specific package I created.
Download the rom from this thread
Download the appropriate device specific package
Install CWM or TWRP recovery.
Boot into recovery, install ROM, then install the device specific package then install gapps.
Wipe Data/Factory Reset if coming from another Rom.
Reboot and enjoy!
Your device name might show up as I9505. If you are bothered by it you can edit the file /system/build.prop in the rom .zip package before you flash it.
This does not affect the way the rom functions in any way.
Please let me know if you have successfully installed and running this rom on any of the US variants of the S4. I don't own the device!
Donate to Bajee, the creator of this rom
Donate to CyanogenMod
Donate to AOKP
Click to expand...
Click to collapse

Devhost mirror for device specific packages

Thank you. This works flawless flashed on my att i337 s4 with ktoonsez kernel. Cheers.
Sent from my I9505 using XDA Premium HD app

Thank you for sharing. Definitely gonna give this a go.

Nice! Was wondering when rootbox was going to work on the s4.
Sent from my Samsung Galaxy S4

CZ Eddie said:
I would love to see this ROM for the AT&T Galaxy S4 (I337) if you have time.
Our bootloader has been bypassed via Loki:
http://forum.xda-developers.com/showthread.php?t=2292157
Click to expand...
Click to collapse
victorator said:
I'll post it on your forums.
Click to expand...
Click to collapse
Woot, that was fast. I just asked last night! Thank you! :good:
.

is bajee affiliated with this in any way?i used his rootbox rom on my s3 just curious?

djmouse said:
is bajee affiliated with this in any way?i used his rootbox rom on my s3 just curious?
Click to expand...
Click to collapse
It says Bajee in the OP.

I didn't notice any way of adjusting the kernel.
Have I missed something?
Sent from my I9505 using xda premium

Flash ktoonsez kernel. It comes with ktweaker. I got a 2.5 days with his ktoonservativeq governor and deadline on AOKP.
Sent from my I337 using XDA Premium HD app

I tried installing the ktoonz kernel, but my phone wouldn't boot up.
Sent from my SGH-I337M using xda premium

Gordietm said:
I tried installing the ktoonz kernel, but my phone wouldn't boot up.
Sent from my SGH-I337M using xda premium
Click to expand...
Click to collapse
Did you flash the AOSP version of KT's kernel? Wipe cache, fix permissions, etc.?
Sent from my SGH-I337 using Tapatalk 2

JediSooner said:
Did you flash the AOSP version of KT's kernel? Wipe cache, fix permissions, etc.?
Sent from my SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
Yes I did.
Sent from my SGH-I337M using xda premium

Gordietm said:
Yes I did.
Sent from my SGH-I337M using xda premium
Click to expand...
Click to collapse
I flashed Koontz T-mobile AOSP kernel and works perfectly.
Sent from my I9505 using xda premium

Is the DPI supposed to be a 480 for all screens or just some of the screens/apps? Some screens still look tiny to me and I can't select more than 320dpi.

Using this ROM with kt's kernel on the at&t variant and phone calls reboot the phone, anyone else experiencing this?

Found the problem. Do not enable in call volume boost under device options - > sound.

Got the ROM flashed with Kt's aosp kernel. Few questions if anyone can help
How do I get rid of the on screen Nav bar and the circle menu on the lock screen?
And how do I get my signal and WiFi bars to be blue instead of gray?
Thanks for the help
Edit: also having bad connectivity problems. One bar to none where I would normally have 3-4 bars? What would cause this?
Sent from my I9505 using xda premium

Hm. After wiping, flashing RootBox-JB-i9505-victorator-20130528.zip, followed by jflteatt.zip, followed by gapps, my initial Samsung splash now has a "custom" lock icon underneath it, followed by a yellow triangle with exclamation point:
System software not authorized by AT&T has been found on your phone.
In tiny red text in the top right: "SECURE FAIL: KERNEL"
Looks like the kernel wasn't loki-patched for some reason? I thought this would be done for us as part of an i337 ROM distribution. Are we expected to loki-patch RootBox as part of installing it on the phone?
I think I followed the instructions... What am I missing?

djthread said:
Hm. After wiping, flashing RootBox-JB-i9505-victorator-20130528.zip, followed by jflteatt.zip, followed by gapps, my initial Samsung splash now has a "custom" lock icon underneath it, followed by a yellow triangle with exclamation point:
System software not authorized by AT&T has been found on your phone.
In tiny red text in the top right: "SECURE FAIL: KERNEL"
Looks like the kernel wasn't loki-patched for some reason? I thought this would be done for us as part of an i337 ROM distribution. Are we expected to loki-patch RootBox as part of installing it on the phone?
I think I followed the instructions... What am I missing?
Click to expand...
Click to collapse
The rom isn't loki-patched because it was made for the I9505 variant. You need to flash Kt's kernel (AOSP version) after flashing RootBox.
Sent from my SAMSUNG-SGH-I337 using xda premium