I am running jellybam 7.5.0, an aosp 4.2.2 rom and i want to overclock my s3 but whenever i go to peformence control it only lets me go to 1512MHz. Can someone find me a kernel that works with this rom cuz i really like the rom and want to keep it and i also really want to overclock. PLZ help me!!!!
Kernels that support overclocking on aosp 4.2.2 roms can be found in the Original Android Development section. You probably won't find much help on xda with jellybam.
xBeerdroiDx said:
Kernels that support overclocking on aosp 4.2.2 roms can be found in the Original Android Development section. You probably won't find much help on xda with jellybam.
Click to expand...
Click to collapse
Can you see if you can find one. Ive looked just cant. on jellybams website they said any aosp compatible will do.
tylerray0040 said:
Can you see if you can find one. Ive looked just cant. on jellybams website they said any aosp compatible will do.
Click to expand...
Click to collapse
You will need one of these two. Depending. In their change log it is not clear if the ROM is based on Linux 3.0 or Linux 3.4 kernel.
KT747:
Aosp 4.2.2 Linux 3.0:
http://www.mediafire.com/?tsoe7rxqhlabpcd
Aosp 4.2.2 Linux 3.4:
http://www.mediafire.com/?851bd2h5r571xi3
Try the 3.4 first if it doesn't boot, reboot in recovery and flash the 3.0.
OK so i downloaded it went into recovery flashed 1 then cleared chache then dalvik then i fixed permissions then when i rebooted it just went to a blank screen. it did this for both kernels l. plz tell me what I'm doing wrong.
Sent from my SAMSUNG-SGH-I747 using xda premium
tylerray0040 said:
OK so i downloaded it went into recovery flashed 1 then cleared chache then dalvik then i fixed permissions then when i rebooted it just went to a blank screen. it did this for both kernels l. plz tell me what I'm doing wrong.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
is jellybam a 3.0 kernel based rom or 3.4?
for 3.4, try flashing the 4/11 release
Whats the 4/11 release
Sent from my SAMSUNG-SGH-I747 using xda premium
tylerray0040 said:
Whats the 4/11 release
nt. nt from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
You really need to find out what kernel this rom supports.
You could also flash the rom again and wipe bothe caches
If I were you I would switch to root box because jellybam is dead now. Try to find the root box nightly in the original development forum. Find the date 4/5 meaning 5th of april . with that I would flash the KT kernel with is also found in original development but download the Linux 3.4 version and flash that with the 4/05 nightly
jellybam is not supported in XDA, nor are duplicate postings of the same issues amongst multiple threads.
This thread is now closed.
Related
Hey guys so I am pretty new to rooting and am trying to put the KT747 kernel with FrostyJB_4.1.1-v4. there is a link in the FrostyJB_4.1.1-v4 thread for the kernel but I am not sure which one to use. FrostyJB_4.1.1-v4 works for me but when trying to flash kt747 when rebooting I just get the Samsung galaxy sIII screen and it won't go past it. I can fix it but any help here?
Any ideas?
How did you fix it? You might want to redownload and check md5. You could have had a bad download.
Sent from my SGH-T999 using xda app-developers app
Try downloading the latest kernel from the Ktoonz thread. Just make sure its the Touchwiz Jellybean kernel. Shoud have "JB" and "TW" in the file name
nicky9door said:
Try downloading the latest kernel from the Ktoonz thread. Just make sure its the Touchwiz Jellybean kernel. Shoud have "JB" and "TW" in the file name
Click to expand...
Click to collapse
well using this thread http://forum.xda-developers.com/showthread.php?t=1871946 it says it does not work with l17 or greater? I tried flashing it but kttweaker just crashes and its restarted my phone a couple of times.
Should I just put frosty jelly bean m3 on and then do it or ?
Use frosty v4. Make sure tou have the ktoonz tw jb kernel. Flash rom go through the setup. Reboot to recovery flash ktoonz wipe cache/dalvik then fix permissions. Reboot download setcpu or any cpu tuner open it first change min/max then open ktweaker otherwise tou will get force close on ktweaker. After opening ktweaker uninstall the other. Should work for ya.
sent via galaxy s3 in boss mode @ 2.1ghz
on this same matter, i am running Frosty JB v7 on my phone, and everytime i try flashing ktoons, my phone refuses to boot after install. It shows the initial "Samsung Galaxy s III" then screen goes dark, and instead of doing the animation and showing the samsung logo, it stays on a dark screen and i hear the sound, but no image ever comes up on the screen. After a few seconds the back and menu buttons light up and stay like that. nothing else happens.
I would really appreciate if anyone can help.
I flashed it using CWM recovery and cleared Cache and Dalvik after flashing, and then fixed permissions.
and i Used the TouchWiz kernel for JB found here:
http://forum.xda-developers.com/showthread.php?t=1871946
Frosty is based on l6-l7. The older ktoonz kernels work. The new ones are based on the source for li8. There is a link in the frosty thread for one of the older kernels if you search for it
Edit: link to the post: http://forum.xda-developers.com/showthread.php?p=33581379
Sent from my SGH-I747 using xda app-developers app
nicky9door said:
Frosty is based on l6-l7. The older ktoonz kernels work. The new ones are based on the source for li8. There is a link in the frosty thread for one of the older kernels if you search for it
Edit: link to the post: http://forum.xda-developers.com/showthread.php?p=33581379
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thank you, with that older version now everything is going well so far. I had a few force closes on xda when trying to reply you, but clearing app data and cache and reinstalling did the trick. Onto long term experience now to see how everything goes o/
Sent from my SGH-T999 using xda premium
hey guys
im new to the rooting business
but i just rooted and flash paranoid android on my s3 i747...glad with the rom
my question is whats the difference between paranoid android and paranoid kangdroid ??
i looked over both and cant seem to see any difference beside the rom control.
sorry if this is already discussed
thanks all
android2.0 said:
hey guys
im new to the rooting business
but i just rooted and flash paranoid android on my s3 i747...glad with the rom
my question is whats the difference between paranoid android and paranoid kangdroid ??
i looked over both and cant seem to see any difference beside the rom control.
sorry if this is already discussed
thanks all
Click to expand...
Click to collapse
That's about the only difference. PA alone is pretty stable. As of now so is PK. PK is a merge of CM10, Tasks AOKP, and ParanoidAndroid. Tasks AOKP I think comes with Ktoonsez Kernel. You have to flash it on PA and PK. Fix permissions after. Always wipe cache and delvik cache before and after. If you are flashing a new rom always do a factory reset first.
Sent from my SAMSUNG-SGH-I747 using xda premium
Apocalypse487 said:
That's about the only difference. PA alone is pretty stable. As of now so is PK. PK is a merge of CM10, Tasks AOKP, and ParanoidAndroid. Tasks AOKP I think comes with Ktoonsez Kernel. You have to flash it on PA and PK. Fix permissions after. Always wipe cache and delvik cache before and after. If you are flashing a new rom always do a factory reset first.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
It (AOKP) does not in fact come with the KT747 kernel.
dntesinfrno said:
It (AOKP) does not in fact come with the KT747 kernel.
Click to expand...
Click to collapse
Ah, thanks for clarifying. I couldn't remember since it's been awhile since I've last used it.
Sent from my SAMSUNG-SGH-I747 using xda premium
I updated my HTC One V to an Unoffical version of CM10 ( Cyanogenmod ). An Official version isn't available yet. I had to:
Unlock the bootloader
Install twrp recovery
Root the phone
Boot into recovery and make a backup then wipe the phone.
Install cm10.zip
My first attempt failed because I didn;t realise you had to flash a custom kernel that supports CM10.I flahed the latest HELLBOY kernel:
boot-HELLBOY-CM10-201302142348.img
Success. I then installed the Google Jelly Bean apps & it was all good.
I've since realised thee is a later version ( 10.1 ) for my phone:
cm-10.1-20130217-UNOFFICIAL-primou.zip
Definately right for may phone as the CM10 that works was also for primou.
Now I boot into recovery & wipe the phone as before
Then install cm-10.1-20130217-UNOFFICIAL-primou.zip
Reboot phone
"HTC it's brilliant" splash screen appears and then nothing. With the working CM10 I get a Cyanogenmod boot animation.
I've restored the phone back to the working CM10 so not bricked.
Can anyone tell me where I'm going wrong ? I looked for a later HELLBOY kernel that supports 10.1 but couldn't find one.
Any rom based on Android 4.2.1 for primo u is not at all stable at this time.... Infact, it doesn't even boot.... So, stick with 4.1 for now...
rohov said:
Any rom based on Android 4.2.2 for primo u is not at all stable at this time....
Click to expand...
Click to collapse
FTFY
Sent from my One V
This Rom does boot. You can either try Maxwen's 4.2 kernel or you can extract boot from the zip. But primou version does not have gsm components working so you can't receive our make calls.
Sent from my One V using xda app-developers app
收件人： cm10.1 boot problem
Where did you download cm - 10.1-20130217 - UNOFFICIAL - primou.zip？could you tell me？
Sent from my HTC T320e using xda premium
Ruling said:
Where did you download cm - 10.1-20130217 - UNOFFICIAL - primou.zip？could you tell me？
Sent from my HTC T320e using xda premium
Click to expand...
Click to collapse
its available via goo manager....dont try it....doesnt even boot
收件人： cm10.1 boot problem
thanks. maybe you can try pac's boot.img
Sent from my HTC T320e using xda premium
Ruling said:
thanks. maybe you can try pac's boot.img
Sent from my HTC T320e using xda premium
Click to expand...
Click to collapse
No kernel is working at dis time... Dats y no rom is booting....
rohov said:
No kernel is working at dis time... Dats y no rom is booting....
Click to expand...
Click to collapse
CM 10.1 does boot with Max's 4.2 kernel. Though as I said, it does not have GSM components active. Still everything else works.
收件人： cm10.1 boot problem
Abhishek.chaurasia said:
CM 10.1 does boot with Max's 4.2 kernel. Though as I said, it does not have GSM components active. Still everything else works.
Click to expand...
Click to collapse
yesterday i booted.use hellboy 20130215
cm10
Sent from my HTC T320e using xda premium
Just wanted to kno.... The dev of cm10.1 is fixing it...??? And why he didnt posted it on xda and only on goomanager....????
rohov said:
Just wanted to kno.... The dev of cm10.1 is fixing it...??? And why he didnt posted it on xda and only on goomanager....????
Click to expand...
Click to collapse
the rom is not booting so no need to post it on the foums
Sabbit said:
the rom is not booting so no need to post it on the foums
Click to expand...
Click to collapse
Someone here said it is booting, just data isn't enabling... I doubt that though
Sent from my One V
Sabbit said:
the rom is not booting so no need to post it on the foums
Click to expand...
Click to collapse
But people said its booting..... Just gsm components are not there....also, codefireX, pacman ar also not booting....but they are here....
CM 10.1
rohov said:
But people said its booting..... Just gsm components are not there....also, codefireX, pacman ar also not booting....but they are here....
Click to expand...
Click to collapse
It's for Rukin to answer . Here's a screenshot.
Abhishek.chaurasia said:
It's for Rukin to answer . Here's a screenshot.
Click to expand...
Click to collapse
Even i have flashed it.. was booting fine with Max's kernel. But there was no network.
This ROM was not even out for using. Lloir did not even mentioned it was ready to use, it just exists in goo.im
Latest working is CM10 10/1/13
I have the AT&T S3 running an 4.2.2 aosp custom rom "jellybam" and i really want to overclock but in the Performance Control it only lets me go to 1512MHz. Can some1 plz help me overclock it but still keep my rom.
Flash this kernel
http://forum.xda-developers.com/showthread.php?p=28399829
It's kernel related. You have to find kernel that support higher overclock.
Sent from my GT-I9300 using xda app-developers app
There is various kernels in the Original development thread that support overclock.
Make sure yo read the OP and figure out which is best for you and your phone.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
So i downloaded the file on my s3 booted into recovery and flashed it then i got stuck in a boot loop. I restored my phone but now what did i flash it wrong?
Sent from my SAMSUNG-SGH-I747 using xda premium
tylerray0040 said:
So i downloaded the file on my s3 booted into recovery and flashed it then i got stuck in a boot loop. I restored my phone but now what did i flash it wrong?
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Could be a few issues.
You could be on an old version of JellyBam that does not use the 3.4 kernel. You also could have downloaded the wrong kernel from the page linked. If you could give us your ROM version that would help.
Its 7.5.0
But do u have to flash a kernel with odin
Sent from my SAMSUNG-SGH-I747 using xda premium
tylerray0040 said:
Its 7.5.0
But do u have to flash a kernel with odin
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Kernels are flashed in recovery, not Odin. The problem may be the recent display changes in KT's kernel. You may want to check his thread for an earlier build (pre 4/19) before the display commits were added.
CamFlawless said:
Kernels are flashed in recovery, not Odin. The problem may be the recent display changes in KT's kernel. You may want to check his thread for an earlier build (pre 4/19) before the display commits were added.
Click to expand...
Click to collapse
correct. flash his 4/11 release.
and if you ever find yourself in a bootloop from flashing the wrong kernel, just flash the correct kernel in recovery. wipe cache/dalvik, fix permissions and reboot. good to go without having to restore or reset anything.
also, i'd stick with ROMs in this forum that are supported by the dev.
Closing this one...as OP has posted duplicate thread here...http://forum.xda-developers.com/showthread.php?t=2246321
All devs please help, I have a question. This question is about the kernel. Can you change the kernel of a ROM without changing ROMs.
Thank you for your help.
Not a dev, but yes. Download your kernel of choice and flash in recovery after wiping dalvik and cache.
Sent from my PC36100 using Tapatalk 2
Yes. Just make sure you flash a Sense kernel on a Sense ROM, and a AOSP kernel on a AOSP ROM.
Sent from my EVO using xda premium
Brennan1999 said:
All devs please help, I have a question. This question is about the kernel. Can you change the kernel of a ROM without changing ROMs.
Thank you for your help.
Click to expand...
Click to collapse
FinZ28 said:
Yes. Just make sure you flash a Sense kernel on a Sense ROM, and a AOSP kernel on a AOSP ROM.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Yes you can and like Fin said,make sure to read the whole op before flashing the kernel,theres alot more to it than just flashing a kernel and even though it says its for AOKP or JB,make sure its made for your rom and alot of devs add different governors and voltage regulators to their kernels,make sure to look at that also,so you can get the best battery life,but at the same time you might want speed,theres alot of things to look for and concider before using a OC kernel,the main thing,follow close directions and if your not sure about something,ask first before bricking your phone.