Related
You've poss heard this un afore. But so far .. this `un aint been resolved, readers. Just got me a XDA Exec and daftily `upgraded' the ROM to exactly the same one as already installed (d'oh!). Aye .. but what happened was that the process failed just as the installation ended .. wih a communication error. Twixt PC and XDA. When I came to reboot .. the unit .. he dead!. The only spark of life is to hard reset. Do this . and you get the bootlaodaer screen showing the Serial 1.oo logo and Press X to quit and 0 to restore. You press 0 .. it just flickers the wee Red power light fleetingly .. but .. he dead, man!. And heres where the quandary comes in .. if you connect up .. even whenin the Bootloader screen. the unit is not seen as owt .. and Windows says its not being recognised when you plug it in .. so ActiveSync wont work and the ROM Updater cant see it .. failing before even trying to install. So there we have it. The unit has no ROM in it. Like a PC without a BIOS. Kinda Catch 22. ITs a dead unit ... only shwoing any life when yu do the hard reset. Shows a Bootloader screen. So do a soft reset? You get a dead unit again. If ou take out the battery and put on mains power ... then the red charge light comes on PUt in the battry.. unit goes blank again. Someone said you can link two XDAs together and do it that way. Really? Then how?. And how DO you get the PC to see it as a XDA?. Most infuriatingn. So really hardware wise its pristine .. its a software thingy!. If you know or even know a man who knows .. then point him/her this way and lets get this baby (XDA EXEC) back to post - resuscitated state Please. Cheers y'all in anticipation and sorry if this subject has already bin solved. Ive seen like-letters but no actual `fix' .. personally I think its return to Taiwan and get their EPROMmer guys to look into it. Can you help?Ta Bruce E Bonuspoints
Think you can edit your post and at least separate it into paragraphs?
Just some curiosity. I'd be willing to help, but I'm too lazy to read it like that.
If you bootup the XDA without the usb cable connected, when it goes into bootloader mode, it should say serial, if you then plug the usb sync cable, it should change to usb on the screen.
at this point, you want to run the rom upgrader software, it might take more than one try to get it to do the biz, I know, cause it took me three times via the sync cable when I tried to upgrade the rom via bluetooth (a mistake I won't be doing in a hurry ), thinking the cable connected was the usb sync cable and not the mains cable.
this might be of some help too http://forum.xda-developers.com/viewtopic.php?t=36115
p.s. take a deep breath and don't panic.
*edit* also found this, which might also help http://forum.xda-developers.com/viewtopic.php?t=37135
Exact thing happened to a friends JASJAR, this is what happened:
1. Same as above and it seems it corrupted the USB drivers so:
1.a. removed the USB drivers in device manager
1.b. rescanned for hardware changes to reload new USB drivers
2. Have to uncheck USB in ActiveSync Connection Settings
3. Hard reset your Universal till SERIAL shows
4. Plug the Universal and wait for SERIAL to change to USB
5. Unpack the ROM update to a directory
6. Delete all .nbf files except Radio_.nbf
7. Run the update (this will update radio only)
8. after Update, Hard reset ( __ + __ + Reset hole)
9. this should revive your Universal.
Then you can update normally again.
Don't forget to re-check USB in ActiveSync connection settings to enable active sync to work
Goodluck.... Just update us
Cheers for the responses .. EXEC lovers!. And sorry about the non-presence of paragraphs to the reader who doesn't like long sentences.. but thats nonstop streams of conscienceness f'yuz!
There .. happy now?. :twisted: Right .. will now nip off and read the links and take up the advice of the chaps who jolly well had the good decency to reply .. I'll let you know .. soon! Here goes, Ronnie! ...... :shock:
Cheers for the responses .. EXEC lovers!. And sorry about the non-presence of paragraphs to the reader who doesn't like long sentences.. but thats nonstop streams of conscienceness f'yuz!
There .. happy now?. :twisted: Right .. will now nip off and read the links and take up the advice of the chaps who jolly well had the good decency to reply .. I'll let you know .. soon! Here goes, Ronnie! ...... :shock:
:lol: Thanks to Messrs. WYTEY and in particular Mr. Jorgee ... MY XDA EXEC has risen from the dead! Thats right .. its back!. I WAS going to write and say it no go from Serial to USB ... mister!. But then tried it on missus's laptop .. it gets recognised.. but not on daughter's PC. Why Winston?. Then d'oh!. And Double D'oh!. The USB cable I am using is off an old memory card reader .. which cable is probably a bit crap. So I used the dedicated one... and .. voila! Back to life .. using the Radio ROM only. Tried the full install .. it no want to know .. back to lifelessness. Tried again .. this time its full and happy as it were. So once again great thanks directed to the Johnny JORG bloke and the WYTEY William whoc came to my assistance. You have just got me £500 of kit back!. I am writing to the Queen to see if you can both be knighted. I am also Royalty .. at least I think I am .. only today I cut this bloke up at a junction in my car and he called me a `Count'!. CHEERS YOU XDA HEROES!!!!!!!!!!
:lol: no probs
Glad to have helped in the resurrection of your phone. This wasn't the first time so I was kinda familiar with the process. Good thing that it was recognized in the laptop. How about now? Does your computer recognize it? My friends USB port of the PC suddenly wento into UNRECOGNIZED USB DEVICE mode mid-upgrading. Don't know what caused the problem though.
The unit has the `hump' now and then but now for general file transfers the cheap cable works fine . .when you do serious stuff like ROM upgrades.. tis the official cable. So its being recognised now and ActiveSync is fine. I do have probs finding a decent PDF viewer.. ClearVue and Adobe still cant display/flow the pages right .. never worked on the Nokia 9500 either really... and also want to know if its poss to use the videocam in MSN Messenger Mobile? But now.. its fine. it works .. and the upgrade fully happy! CHeers again!. Now . .whens the next upgrade coming? :roll: Aye!
hi
I have some questions,sorry for my bad English
I try to find them,so I use search and also try to see last 10 page posts in all artemis section!!!!! some of my questions are remain and I cant find my answers :
1- can I use my GPS module in PC ? like an external usb GPS module ?
(i read we can use GPRS by USB_MODEM and cant use WI-FI card ... what about GPS ?)
2- is there any differnce between charge in ACTIVESYNC or when artemis is off and not in activesync (just 10day witch i bought p3300 and not test it yet,but i think it is faster when is not in activesync...)
3-how can I disable charging when i am in activesync ? (i think it is better for battry to FULL charge it and let too rich 5-10% of charge and then plug charger! (please let me know is it true ? ) but when i try to instal any program,it start charging ) is it any way to disable charging ... ?
4-how can i add hand writing recognization too windows mobile 6 in NOTE ?
5-USB 1.1 is very slow in activesync!!! but when we use mobile to be a MASS STORAGE it is going to be slower ... memory crad is under sim card and sim card is under battry!!
so is there any better way to connect memory to PC !!?
6-in manual,it say our GPS can get data from 20 satelite,but never i can find more than 12sat. is there any problem ?
7-in WM5,in contacts,I can see both mobile and simcard numbers,but in SM6 i cant
khepelesibilo said:
1- can I use my GPS module in PC ? like an external usb GPS module ?
(i read we can use GPRS by USB_MODEM and cant use WI-FI card ... what about GPS ?)
Click to expand...
Click to collapse
Yes, You can. Use GPS Gate, homepage, wizard
3 == it's a myth! that one should not charge a full or almost full batt
it was true wayyyyy back with ni'cad batts but li'ion batts benefit from being charged often but letting the batt wear down on li-ion batts on the other hand harm them
5 == putting the sd card in a sd reader on the pc which support usb2 is the fastest way to get files from the pc to the pda
6 == if your location only have access to that nr of satelites thats what you will get they are Geostationary
http://en.wikipedia.org/wiki/Geostationary
khepelesibilo said:
1- can I use my GPS module in PC ? like an external usb GPS module ? (i read we can use GPRS by USB_MODEM and cant use WI-FI card ... what about GPS ?)
Click to expand...
Click to collapse
Here's a description how to do that. Never tried on my own so i don't know if it is working well...
khepelesibilo said:
4-how can i add hand writing recognization too windows mobile 6 in NOTE ?
Click to expand...
Click to collapse
Which ROM u are using ? In a default ROM you can choose SIP between Block Recognizer, Letter Recognizer and Transcriber.
Isn't it that you're searching ? In some ROMs they are disabled/removed
khepelesibilo said:
5-USB 1.1 is very slow in activesync!!! but when we use mobile to be a MASS STORAGE it is going to be slower ...
memory crad is under sim card and sim card is under battry!! so is there any better way to connect memory to PC !!?
Click to expand...
Click to collapse
IMO it's enough for syncing PIM data and little cabs etc. If you want to copy big files (TomTom maps for example), i would use a card reader....
khepelesibilo said:
6-in manual,it say our GPS can get data from 20 satelite,but never i can find more than 12sat. is there any problem ?
Click to expand...
Click to collapse
I don't think so. you can find, but i think it is depending on weather, location and other influences...so don't worry about that.
khepelesibilo said:
7-in WM5,in contacts,I can see both mobile and simcard numbers,but in SM6 i cant
Click to expand...
Click to collapse
Not quiet sure, but i think with this regkey you can enable your SIM contacts:
[HKEY_CURRENT_USER\ControlPanel\Phone]
"ShowSim"=dword:1
khepelesibilo said:
6-in manual,it say our GPS can get data from 20 satelite,but never i can find more than 12sat. is there any problem ?
Click to expand...
Click to collapse
It has 20 channels but can use only 12 at the same time... so 12 is the maximum amount... never get more with artemis...
thank you for your answers
I am trying Artemis Touch 2.1 ROM ,but too problems and I think i mut change it to Black & Blue v4.3 (also it looks newer version...) please let me know any other opinion ....
now I can use my phnoe like GPS module , I know there is not any overclock for USB port ,I can't disable charging in activesync mode ,handwriting recognization and simcart numbers may solve by changin ROM! also my GPS works fine and no GPS unit can see more than 12 sat. !!because they are 24sat on world and we cant see sat.s on other side of world!!
so please let me to ask some other Q. :
1-please let me know best way of charging my mobile to have a long batry life!
2-can i have a better VIDEO CAPTURing ? i think nokia 6600 can capure video better than my p3300 !!!
khepelesibilo said:
1-please let me know best way of charging my mobile to have a long batry life!
Click to expand...
Click to collapse
Withe Li'Ion batteries, it doesnt make a difference how often you charge, as long as you end up with 100%. if you want a better battery life, have a look at this thread: http://forum.xda-developers.com/showthread.php?t=328749
khepelesibilo said:
2-can i have a better VIDEO CAPTURing ? i think nokia 6600 can capure video better than my p3300 !!!
Click to expand...
Click to collapse
The Camera on the Artemis is crap. dont expect any more!
Hi there.
This is my first post here.
I have a P3300 and I'm searching for the same: disable charging while USB to PC cable is connected (at least when I want).
My experience with cell phone batteries tell me that I can agree with Rudegar in one way but not in the other. I believe that start charging before the battery is almost empty is not the problem, the really problem is stop the charge before the battery is full.
So, I want to disable charging not exactly to avoid charging the PDA but to eliminate the problem of interrupting a charge before it is completed. Ex: I have 50% of battery and want to load some files I'll need to use in a meting; I plug the USB cable; it starts to charge; I copy the files; after a few minutes of charging and copying the files are copied and the battery is at 55%; I disconnect the cable and of course the charging is interrupted and that I believe is not good for the battery by experience in other occasions.
If any one knows a pluggin to solve this problem, please tell me.
Best Regards,
Cidi Rome.
Update.
I've made a test suggested by other users (don't know if it was here too, but I googled arround) that I inform that, at least, with P3300 don't work. That is to cut/disconnect the +5V pin from the usb port/cable. When that is done the PC/PDA don't recognize each other and nothing happens.
I think this feature is a must, I can't believe that so little people is searching for it....
Best Regards.
Hi all,
my TMO-MDAIIIc stopped syncing over usb cable!
I do not have any clue why!
Last thing i remember i installed the OpenVPN-Client!
I did this before on Windows Mobile 5 without problem.. So i presume it's not caused by OpenVPN!
Nevertheless i wonder if anyone has experienced this as well? I tried to connect the device to several computers without even ActiveSync recognizing it. But loading the battery over USB still works!
I also do not get a "Network Interface" if i connect the cable.
I searched several forums and find out there were similar problems, but unfortunately no solution for me...
It seems not to have something to do with the "Notification deleted" problem..
As i can see several replog.exe notifications. Also the one about RS232 Connections... Is there any other Notification missing maybe?
I also tried to play with the USB-to PC option in the settings menu. No effect.
Im totaly clueless i can sync via bluetooth, and irda, and of course wireless (gprs).
Any help would be much appreciated!
Cheers!
Syn
My phone stopped working the same as yours about 6 months ago. I recently found out that it was because i charge my phone in my car, which can damage the USB Interface Board in the phone. (usually when you have the phone on charge, and then start the car, causes a spike in the current).
As far as i know, the only way to fix it is to send the phone back to the supplier, who will replace the board under warrenty.
Assuming you have the same problem
Hi, thanks for reply!
could be true! I also charge it in the car frequently... I didn't payd a lot attention to if i plug it beofre starting the car or after...
So my last try now seems to be a "hard-reset".
I'll let you know if it fixes the problem.... If not....
I may need to "downgrade" the phone b4 sending it right?
Cheers!
Syn
Synablade said:
Hi, thanks for reply!
could be true! I also charge it in the car frequently... I didn't payd a lot attention to if i plug it beofre starting the car or after...
So my last try now seems to be a "hard-reset".
I'll let you know if it fixes the problem.... If not....
I may need to "downgrade" the phone b4 sending it right?
Cheers!
Syn
Click to expand...
Click to collapse
yeh, its probably a good idea to put the original ROM back on
What's really bugging me is:
Why is it still "loading" the battery after damage to the USB-Circuit??
Anyway.. i did the hardreset, and guess what...
no effect... my problem now is.. if usb stopped working.. how do i flash back to original rom? :->
bluetooth? *shudder*
Cheers!
Syn
hi,
I always clear the option usb to pc.I think this wil solve you problem
settings>connections>usb to pc
Cheers,
zaza
Synablade said:
What's really bugging me is:
Why is it still "loading" the battery after damage to the USB-Circuit??
Anyway.. i did the hardreset, and guess what...
no effect... my problem now is.. if usb stopped working.. how do i flash back to original rom? :->
bluetooth? *shudder*
Cheers!
Syn
Click to expand...
Click to collapse
yeh, same as me i havent been able to flash a cooked ROM to mine at all. You can change the ROM by using the MicroSD, as long as you are USPL unlocked. There is a section in the Wiki about how to do it.
You cant change the ROM using bluetooth, caus half way thru flashing, whats gonna control the bluetooth??!
The Battery still charges caus the battery charging circuit is seperate to the USB control circuit
Are you guys running XP on your comp/laptop? have you turned off your firewalls? i had problems syncing on my laptop with xp, now i use my comp, but i found if i removed firewalls all was ok. if you have tried reflashing, or if you havent flashed any new software if you have tried re-sinstalling active sync, try the above, im sure its somethign simple
patterns said:
Are you guys running XP on your comp/laptop? have you turned off your firewalls? i had problems syncing on my laptop with xp, now i use my comp, but i found if i removed firewalls all was ok. if you have tried reflashing, or if you havent flashed any new software if you have tried re-sinstalling active sync, try the above, im sure its somethign simple
Click to expand...
Click to collapse
I've tried everything... WinXP, WinXPx64, Win2000, Win Vista, active sync V.3-4.5... the only answer is to send the phone back to T-Mobile, they will fix it under warrenty tho, so it aint so bad.
hi thank you all for your replies!
unfortunately i think mugglesquop is right,
the device died from power overflow from car adapter...
funny thing here is: i use a motorola car adapter all the time! no problems.. then i changed to a tmobile provided adapter! And now it seems that tis one is vulnerable to power highs! Great!
You know what ? I love t-mobile for providing "cheap" "crappy" hardware!
actually im downloading the original rom i found and i will try to flash it back via sdcard. Then i will send it in!
Cheers!
Syn
What rom are you using ?
I had the same problem & i was using B&B4.3. It took me a couple of days of trying before i could get an activesync connection. I then flashed O2's mobile 6 Rom & hey presto everythings working again (now trying different rom). Not sure it was the Rom as only a few people seem to have experienced the problem. So it could have just been a coincidence. Also i would assume that the problem should be instant rather than after a few days of having the rom flashed. Have you tryed jiggling the usb cable about in the phone to try & get a connection ?
Synablade said:
hi thank you all for your replies!
unfortunately i think mugglesquop is right,
the device died from power overflow from car adapter...
funny thing here is: i use a motorola car adapter all the time! no problems.. then i changed to a tmobile provided adapter! And now it seems that tis one is vulnerable to power highs! Great!
You know what ? I love t-mobile for providing "cheap" "crappy" hardware!
actually im downloading the original rom i found and i will try to flash it back via sdcard. Then i will send it in!
Cheers!
Syn
Click to expand...
Click to collapse
lol, gotta love T-Mobile... No WM6 update as well
Good luck getting ur MDA sorted!
I just purchased this phone and after extensive searching was unable to find any information regarding modifying the ROM.
This Quad Band Phone has the following features;
2.8" touchscreen
TI OMAP 1030 (ARM926T)
128 Rom 64 RAM
WM6.0
GPS
WiFi
Bluetooth 2.0
GPRS Edge
2Mp Camera
Microsim slot that supports up to 4GB T flash Card
I was wondering if there were some generic modding tools / instructions to extract and modify the ROM.
I primarily want to do this because the WM6.0 OS does not seem to be complete. e.g. the HKLM/Software/OEM/PhoneSetting key is not there and when added with the key ShowTimeZonePage there is no change. (this was done manually and with the HTC Registry wizard
I would also like to trim down unneeded programs to maximize the storage space and perhaps add the TF2D to the ROM.
TF2D installed perfectly on this device however takes the majority of my RAM limiting what I can install in there.
I read somewhere that this was an HTC Diamond Clone. While I do see the simular design I doubt the hardware is the same. Even still I have to ask. would the HTC software and ROM's work with this Phone?
One last question. Would it be possible to upgrade the OS to WM 6.1 using an existing ROM Image? I doubt it but had to ask. I am sure that I will have to dump the ROM from the phone and use that image to edit.
Please let me know your thoughts. Good or bad.
I hope to be able to modify this phone and if not that is ok because it is still a good phone as is. I was just hoping to get more out of it.
i have the same phone
hey, i have the same phone ... did you found anything about modding it ?
I was able to dump the ROM however since part of it is SRPK encoded I was unable to do anything with it.
I Have a more detailed thread on what I was able to accomplish going here
http://forum.xda-developers.com/showthread.php?t=455233
If you get any farther please share.
I Found the Rom for WM6.1
Hey, i found the rom for WM6.1 its an img file, but, i dont know how to procede, tell me how to send you, to test.
upload the file to this site
http://uploaded.to/
and post the link here
Are you sure this is for the hTY Q5? Where did you find it?
Rom
http://uploaded.to/?id=6u3czv
is from the Development team of the phone, is a "test" rom
matagatoz said:
http://uploaded.to/?id=6u3czv
is from the Development team of the phone, is a "test" rom
Click to expand...
Click to collapse
Hi!
Just reading through the forum here. ggeisler, any luck with that WM6.1 ROM?
HTY/Hantel Q5 - TouchFlo 3d (manilla)
Does anyone know if the new TouchFlo 3D Manilla (as seeon on the HTC Touch Diamond) works on tihs phone? and if so, any particular place I can I can find it to install it on the Hantel Q5 WM6?
Can someone tell me more about this device and it's InfraRed port
I want to know is this the CIR infrared port, so that u can use the device also as a remote controller for your television at about 2 meters distance?
Can someone please try this, I want to know this fact before buying one...
Can you recommend this phone for buying?
Thnx
Jaromirtje said:
Can someone tell me more about this device and it's InfraRed port
I want to know is this the CIR infrared port, so that u can use the device also as a remote controller for your television at about 2 meters distance?
Can someone please try this, I want to know this fact before buying one...
Can you recommend this phone for buying?
Thnx
Click to expand...
Click to collapse
Your best bet is to pose the question to the vendor on this one. Atleast you'll know for sure, otherwise be refunded if any information on the device that is inaccurate after purchase. Hail to eBay and PayPal protection! Seriously though, if the decision to buy this phone is based on a condition of using it for a remote control for your TV, you're best off not buying this device. Anyhow, I`m still waiting for my order of this device to arrive. I`ll test and let you know, but from the specs I read, it didn`t note a CIR infrared port. Anyone?
There is no infrared on this phone that I am aware of. Perhaps other model variants have one.
I have not had a chance to play with the ROM yet but as soon as I have a chance I will try to load it and post back here with the results.
Hantel007 said:
Does anyone know if the new TouchFlo 3D Manilla (as seeon on the HTC Touch Diamond) works on tihs phone? and if so, any particular place I can I can find it to install it on the Hantel Q5 WM6?
Click to expand...
Click to collapse
yes it works but I have only been able to get UPDATE 19 to work and it was verry slow. (ultimately had to remove it) you can install everything into memory fine but you will have very little space left on the device. If you install anything on the SD Card it will be to slow to use.
get it from here
http://forum.xda-developers.com/showthread.php?t=398173
Can someone already confirm if the hty q5 has cir or not....
the respones i got from ebay sellers:
*bestplace4you says it has no infrared at all, de factory is still developing it...
*www.tomtop.com says it is the short range infrared that has to be aimed directly
*light_wholesale says it is with the strong infrared signal (cir)
so still no view on this....
can someone bring the light to this topic...
Jaromirtje said:
Can someone already confirm if the hty q5 has cir or not....
the respones i got from ebay sellers:
*bestplace4you says it has no infrared at all, de factory is still developing it...
*www.tomtop.com says it is the short range infrared that has to be aimed directly
*light_wholesale says it is with the strong infrared signal (cir)
so still no view on this....
can someone bring the light to this topic...
Click to expand...
Click to collapse
NO IR at all
I have the device in my hand, nothing on it looks like it has an ir emitter.
I am sure tomtop is confusing this Q5 with another phone
this one has;
GPS
Bluetooth
Quadband (some models have triband so be careful you may need 850Mhz in some locations)
Edge
2MP Camera
WiFi
WM6 (hopefully upgradable to 6.1 still trying)
TF Card slot capable of up to 4GB (tried 8GB and only read 4)
But still no ir port.
Windows mobile has settings for ir but the hardware just is not there.
so one more time, I can confirm that there is no ir on this phone!
Tha last phone I had with ir sucked using as a remote. I ended up replacing the ir emmiter because the one that was in it was just to weak. the new emmiter worked better however the wavelengths transmitted via ir are not used by all remote controls.
If you want a remote go buy a remote. Using you phone is not the best option.
hey, mine has a 8gb microsd ... and it reads it all
ggeisler said:
yes it works but I have only been able to get UPDATE 19 to work and it was verry slow. (ultimately had to remove it) you can install everything into memory fine but you will have very little space left on the device. If you install anything on the SD Card it will be to slow to use.
get it from here
http://forum.xda-developers.com/showthread.php?t=398173
Click to expand...
Click to collapse
Ahh, Sorry to hear about the perfomance, was really looking forward to getting the interface on this device with smooth operation. One thing to note though, and this is something that I inquired about with the Windows ROM versions, is that my device came installed with Windows Mobile 6.1. I wonder if that would make a difference at all. Anyway, No big deal really. Right now my challenge is to get the GPS working. Keep getting the "No Valid GPS signal" etc.. and I've tried it everywhere.. suggestions? (sigh) Anyway, Thanks for providing me the link for U19, I'll give it a go and see what happens.
This message simply means that is has not locked onto a GPS Satellite signal yet. My phone has taken as long as 10 min to lock on (when indoors). It is significantly faster when outdoors.
FYI
COM: 5
Baud: 4800
(If using TomTom choose "Other NMEA GPS reciever")
If your phone came with WM6.1 would it be possible for you to dump an image of it for all of us with 6.0?
I have been trying to get the Image provided by matagatoz with no success.
I believe that na external program was used to first update the bootloader before updating the ROM. since I nether have this program or the updated bootloader all my attempts to upload this image have failed.
I have even attempted a SD card install but have not found an appropriate combination of file name of image, or key press combo for updating
I found that holding down Power and the End Call button resets device to factory defaults. Holding the end call and pressing the reset does the same thing. I have not found any other key press combination's that do anything else.
Update
Did you try to reboot it using Power + circle button, or turning it on with that combination... is supposed to load teh image file into rom from SD card with that
matagatoz said:
Did you try to reboot it using Power + circle button, or turning it on with that combination... is supposed to load teh image file into rom from SD card with that
Click to expand...
Click to collapse
Any clue as to what to name the image?
I have tried your key combo (reset while pressing circle) and the device shuts off and is unresponsive (nothing on screen) until it is reset again (will not power back on)
I think we may be on to something I think we just need the correct file name.
Currently I have tried;
HTC.nbh
HTY.nbh
ELFIMG.nbh
ELF0IMG.nbh
UPLOADER.IMG
Flash Procedure ( images on DOC inside ROM download RAR )
Xuzhou 999ppc smart phone network
3.13 before the escalation of the original guidelines
Web site: www.999ppc.com
Entities shop Address: Xuzhou Huaihai Road Hongqiao 137 million electronic market on the second floor A2-53
Tel :0516-82580216 Mobile: 13914898099 (晁生), 13092311039 (single Health) QQ: 49360705,65872551 QQ exchange group HTY group: 57,841,094
Taobao shop: http://shop36275237.taobao.com/
First, before the 3.13 version 6.1 upgrade steps:
Note: upgrading the necessary equipment (computers, USB line, leave the battery fixture), veneer, upgraded machine can be used tweezers to connect TP3, TP17 trigger. As a result of individual trigger abnormal escalation after using fake battery upgrade.
1. Intercalation USB line to install drivers. (Installed after the pull-out USB line)
2.2. Open decompression after the upgrade software,
3. Click on the upgrade software, upgrade function keys.
4. Connect USB cable, shorted PCBA contact.
5. Upgrade to connect the success of the upgrade started.
6. The upgrade is complete
Second, after the 3.13 version of Brush Tutorial:
1, to prepare a capacity of less than 1G cards tf.
2, will be available compression package (uploader.img) copied to the card's root directory
3, to ensure that your battery not too little, at least above 50%
4, will be shut down mobile phone and the battery is removed, place will be mounted on a mobile phone
5, copy files to the TF card into the phone TF bed
6, at the same time hold down the "power button + the middle of a round navigation button" after a few seconds the screen "update"
7,几十秒, the phone will automatically re-starting, so Q5 your success on the Brush
I finallt got my wifi connections working by changing my security to wpa/psk so I got that sorted out.
Was wandering if a couple things worked.
1)Sound?? Any sort what so ever.
2)The light on the keyboard..Is there a way to turn it on( ) or is it just not working yet??
3) The number keys on my keyboard are just soooo out of wack..No numbers and the symols it put's out don't corrispond with the symbols on the keys themselves..Does that have something to do with the provisioning or is that not working as well??
I'm using [MJG]Rhod.2.2.BLAZN.072110 if that makes any difference.
Hoping for some answers and I appreciate it.
~SMurf
You should definitely read thru the posts for everything you install first most devs tell you what works and what doesn't, but...
No sound in android for touch pro 2( meaning no matter what build of android you install, no matter who developed it atm there is no external speaker sound) other than in speaker-phone I think
Atm you cannot control your keyboard lights thru android, nor the hard keys you have on your phone, so make sure that both turn off before you run android off your SD card to avoid battery drainage.
As for the number key situation I have no idea, Im running 2.2 froyo by project android and I have no problems whatsoever with my keys...
and actually i just saw your forum siggy, if you have a tmobile touch pro 2 you need to get the fix for your keyboard. Search is your friend.
smurfgod said:
I finallt got my wifi connections working by changing my security to wpa/psk so I got that sorted out.
Was wandering if a couple things worked.
1)Sound?? Any sort what so ever.
2)The light on the keyboard..Is there a way to turn it on( ) or is it just not working yet??
3) The number keys on my keyboard are just soooo out of wack..No numbers and the symols it put's out don't corrispond with the symbols on the keys themselves..Does that have something to do with the provisioning or is that not working as well??
I'm using [MJG]Rhod.2.2.BLAZN.072110 if that makes any difference.
Hoping for some answers and I appreciate it.
~SMurf
Click to expand...
Click to collapse
You need to read a bit more bud.
1. No
2. No (Turn it on before booting android and it will stay on 100% of the time while android is on but this is the only workaround currently)
3. Read up on FAQ about your startup.txt file. There is a cmdline that controls what keyboard you are using.
I appreciate the help folks. It's a shame about the sound tho..
Anyway..Found out my problem with the buttons..I was thinking that the provisioning dealt with the network, so I installed the cab for AT&T..That one didn't work(keyboard issues) so I installed the T-Mo cab and it's all fixed. Works like a charm.lol
As for the keyboard light..Mine just works. I didn't think I turned anything on in WinMo prior to booting, and it works like it should(slide on/off)..or at least I think it does..lol
USB connection
Hello all,
Can it be possible to connect the phone via USB connection (for instance to a Mac computer)? I want to install my own Android app and I tried to connect the phone via USB and it doesn't work. Is there other way to install apps?
Best regards,
Arturo
asalinas said:
Hello all,
Can it be possible to connect the phone via USB connection (for instance to a Mac computer)? I want to install my own Android app and I tried to connect the phone via USB and it doesn't work. Is there other way to install apps?
Best regards,
Arturo
Click to expand...
Click to collapse
just put the .apk in your andboot/androidapps folder, and when you use the update tool, before you choose run android, go to meu>apps and make sure you app is checked in the lil box next to it. to transfer it to your phone you could get a bluetooth dongle for your computer, transfer it that way, or upload it to a filehosting site.from your computer n then download it from your phone