Few questions about Android on the TP2 - Touch Pro2, Tilt 2 Android Development

I finallt got my wifi connections working by changing my security to wpa/psk so I got that sorted out.
Was wandering if a couple things worked.
1)Sound?? Any sort what so ever.
2)The light on the keyboard..Is there a way to turn it on( ) or is it just not working yet??
3) The number keys on my keyboard are just soooo out of wack..No numbers and the symols it put's out don't corrispond with the symbols on the keys themselves..Does that have something to do with the provisioning or is that not working as well??
I'm using [MJG]Rhod.2.2.BLAZN.072110 if that makes any difference.
Hoping for some answers and I appreciate it.
~SMurf

You should definitely read thru the posts for everything you install first most devs tell you what works and what doesn't, but...
No sound in android for touch pro 2( meaning no matter what build of android you install, no matter who developed it atm there is no external speaker sound) other than in speaker-phone I think
Atm you cannot control your keyboard lights thru android, nor the hard keys you have on your phone, so make sure that both turn off before you run android off your SD card to avoid battery drainage.
As for the number key situation I have no idea, Im running 2.2 froyo by project android and I have no problems whatsoever with my keys...

and actually i just saw your forum siggy, if you have a tmobile touch pro 2 you need to get the fix for your keyboard. Search is your friend.

smurfgod said:
I finallt got my wifi connections working by changing my security to wpa/psk so I got that sorted out.
Was wandering if a couple things worked.
1)Sound?? Any sort what so ever.
2)The light on the keyboard..Is there a way to turn it on( ) or is it just not working yet??
3) The number keys on my keyboard are just soooo out of wack..No numbers and the symols it put's out don't corrispond with the symbols on the keys themselves..Does that have something to do with the provisioning or is that not working as well??
I'm using [MJG]Rhod.2.2.BLAZN.072110 if that makes any difference.
Hoping for some answers and I appreciate it.
~SMurf
Click to expand...
Click to collapse
You need to read a bit more bud.
1. No
2. No (Turn it on before booting android and it will stay on 100% of the time while android is on but this is the only workaround currently)
3. Read up on FAQ about your startup.txt file. There is a cmdline that controls what keyboard you are using.

I appreciate the help folks. It's a shame about the sound tho..
Anyway..Found out my problem with the buttons..I was thinking that the provisioning dealt with the network, so I installed the cab for AT&T..That one didn't work(keyboard issues) so I installed the T-Mo cab and it's all fixed. Works like a charm.lol
As for the keyboard light..Mine just works. I didn't think I turned anything on in WinMo prior to booting, and it works like it should(slide on/off)..or at least I think it does..lol

USB connection
Hello all,
Can it be possible to connect the phone via USB connection (for instance to a Mac computer)? I want to install my own Android app and I tried to connect the phone via USB and it doesn't work. Is there other way to install apps?
Best regards,
Arturo

asalinas said:
Hello all,
Can it be possible to connect the phone via USB connection (for instance to a Mac computer)? I want to install my own Android app and I tried to connect the phone via USB and it doesn't work. Is there other way to install apps?
Best regards,
Arturo
Click to expand...
Click to collapse
just put the .apk in your andboot/androidapps folder, and when you use the update tool, before you choose run android, go to meu>apps and make sure you app is checked in the lil box next to it. to transfer it to your phone you could get a bluetooth dongle for your computer, transfer it that way, or upload it to a filehosting site.from your computer n then download it from your phone

Related

List of things that WORKS and do NOT WORK with NEW ROM

Please list the things that WORK and do NOT WORK with the new ROM uni_cdl_13068_130153_10900_wwe.
Opera 8.5 beta 2 with Tabs Works
You have to change the System font to somethin else though and then back to Tahoma else you see Wingdings
Use Tweaks 2k2.net to achieve this
Regards
The COnnection manager key on the hardware keyboard (Fn+Right Arrow) doesn't do anything anymore
Everything seems to work better and faster on my jasjar, except the fn key combination to turn on the comm mgr. Other than that everything seems to work for me
It can't show date & time on top bar on today screen as it is occupied by the battery icon.
I tried using tweak2k2 to add date & time, it was ok on other screens except "today". On today screen, it shows a broken icon.
May be it is just a simple reg tweak, but waiting to be found... Ideally, I want to see both info.
Bluetooth Turning off by itself
From what I have seen so far the new ROM has a similar problem than the current official Imate release English ROM 1.13.53 with Bluetooth turning itself off. In connection manager it appears to be on but when entering the settings the tickbox is blank. Has anybody else seen this behaviour or have a workaround? Thank you.
Bluetooth Turning off by itself
From what I have seen so far the new ROM has a similar problem than the current official Imate release English ROM 1.13.53 with Bluetooth turning itself off. In connection manager it appears to be on but when entering the settings the tickbox is blank. Has anybody else seen this behaviour or have a workaround? Thank you.
i am having a problem with mms and pop accounts, dont work. others said its just my device, but dont want to hard reset again....
Netfront 3.1 and Netfront 3.2 dont work for me in this version. It just wont open.
simon_darley said:
i am having a problem with mms and pop accounts, dont work. others said its just my device, but dont want to hard reset again....
Click to expand...
Click to collapse
I cant get MMS working with O2, was going to try to have a look at it later tonight.
Can't get SPB Pocket Plus software to run in that it installs OK and appears to function without problems but as soon as you do a reset on the universal it hangs when restarting on the windows startup screen.
This appears to be nothing to do with the extended ROM as I also have the same problem when this is not installed.
Does anyone know how to make the extended ROM visible in such a way that the system doesn't create a second "Storage Card" entry. This behaviour occurs when I set the
HKLM\System\StoreageManager\autoload\TRUEFFS_DOC1 bootphase attribute to 2
and because I have installed all my utilities on the SD Card they don't work any more as the SD card gets renamed to "Storage Card1"
ppitkin said:
Can't get SPB Pocket Plus software to run in that it installs OK and appears to function without problems but as soon as you do a reset on the universal it hangs when restarting on the windows startup screen.
This appears to be nothing to do with the extended ROM as I also have the same problem when this is not installed.
Does anyone know how to make the extended ROM visible in such a way that the system doesn't create a second "Storage Card" entry. This behaviour occurs when I set the
HKLM\System\StoreageManager\autoload\TRUEFFS_DOC1 bootphase attribute to 2
and because I have installed all my utilities on the SD Card they don't work any more as the SD card gets renamed to "Storage Card1"
Click to expand...
Click to collapse
Just curious, are you using v.3.1 of SPB Pocket Plus? I never got the problem you say. I have installed SPB on O2, Imate, and QTEK variants of the universal ROM
pocket outlook now polls for email whether you leave it on the said account or not. Oh push email works great!
jorgee: The purchase invoice says 3.0 - naturally I can't look as I don't currently have it installed because of the reset issue.
Never had a problem with the old ROM (German T-Mobile from january)
Really annoying as I love the features this tool has.
ppitkin said:
jorgee: The purchase invoice says 3.0 - naturally I can't look as I don't currently have it installed because of the reset issue.
Never had a problem with the old ROM (German T-Mobile from january)
Really annoying as I love the features this tool has.
Click to expand...
Click to collapse
U should upgrade to 3.1, you'll notice huge improvement in speed and if i'm not mistaken you'll get free update since you purchased 3.0, just use the old serial number.
I even installed it on extended rom memory without any problem at all, it runs as good as installed in main memory
Jorgee: thanks for the tip.
3.1 works great (even after a reset!). I'm a happy man again.
On my old Qtek 9000 ROM, the data connection automaticly disconnected after checking email, but with this new ROM, the connection stays on.
Anyone knows a way to change this back ??
findus said:
simon_darley said:
i am having a problem with mms and pop accounts, dont work. others said its just my device, but dont want to hard reset again....
Click to expand...
Click to collapse
I cant get MMS working with O2, was going to try to have a look at it later tonight.
Click to expand...
Click to collapse
snap mms isnt working on o2 paygt also in the connection settings the domain is suposed to be payandgo.02.co.uk but you cant fit it all in, if you leave it blank tho it still connects to the net
Log me in
Log me in, an remote acces application, doesnt seem to work under new ROM, did work under Qtek 1.13.64. (www.logmein.com)
keyboard backlight
I can't find the reg key to change the length of time the keyboard backlight stays on. I am not sure if the location changed or not, but it isn't where it used to be, at least on mine.

Help Please Comm manager problems

I did the htc update to my dash now my Comm manager has 2 greyout buttons that I cant get to work the push and the data connection . Also I cant bluetooth files anymore. what gives I dont want to go back to t-mobile but I may have to unless I can get fixed
Nothing Is Wrong With The ROM
c-tang said:
I did the htc update to my dash now my Comm manager has 2 greyout buttons that I cant get to work the push and the data connection . Also I cant bluetooth files anymore. what gives I dont want to go back to t-mobile but I may have to unless I can get fixed
Click to expand...
Click to collapse
Why is the ROM working perfect on all my devices and but not yours? Push e-mail , bluetooth and I have a Data connection on my devices, its all working perfect. Now the reason these things are not working on your device is because you have not taken the time to configure the SETTINGS for these components to work on your devices. How do you expect them to work without the correct SETTINGS in place on your devices, think about it dude...............................!
Ok.... a lil help what settings do i need to configure. serious I have been looking. I just need some help. thats why im here
First You Need The Data Settings
Get The T-Mobile Data settings here at post number 2 http://forum.xda-developers.com/showthread.php?t=338536, young grasshopper you should be able to make it from here, but if not holla back.........!

hTY Q5 (AKA Hantel Q5) moding

I just purchased this phone and after extensive searching was unable to find any information regarding modifying the ROM.
This Quad Band Phone has the following features;
2.8" touchscreen
TI OMAP 1030 (ARM926T)
128 Rom 64 RAM
WM6.0
GPS
WiFi
Bluetooth 2.0
GPRS Edge
2Mp Camera
Microsim slot that supports up to 4GB T flash Card
I was wondering if there were some generic modding tools / instructions to extract and modify the ROM.
I primarily want to do this because the WM6.0 OS does not seem to be complete. e.g. the HKLM/Software/OEM/PhoneSetting key is not there and when added with the key ShowTimeZonePage there is no change. (this was done manually and with the HTC Registry wizard
I would also like to trim down unneeded programs to maximize the storage space and perhaps add the TF2D to the ROM.
TF2D installed perfectly on this device however takes the majority of my RAM limiting what I can install in there.
I read somewhere that this was an HTC Diamond Clone. While I do see the simular design I doubt the hardware is the same. Even still I have to ask. would the HTC software and ROM's work with this Phone?
One last question. Would it be possible to upgrade the OS to WM 6.1 using an existing ROM Image? I doubt it but had to ask. I am sure that I will have to dump the ROM from the phone and use that image to edit.
Please let me know your thoughts. Good or bad.
I hope to be able to modify this phone and if not that is ok because it is still a good phone as is. I was just hoping to get more out of it.
i have the same phone
hey, i have the same phone ... did you found anything about modding it ?
I was able to dump the ROM however since part of it is SRPK encoded I was unable to do anything with it.
I Have a more detailed thread on what I was able to accomplish going here
http://forum.xda-developers.com/showthread.php?t=455233
If you get any farther please share.
I Found the Rom for WM6.1
Hey, i found the rom for WM6.1 its an img file, but, i dont know how to procede, tell me how to send you, to test.
upload the file to this site
http://uploaded.to/
and post the link here
Are you sure this is for the hTY Q5? Where did you find it?
Rom
http://uploaded.to/?id=6u3czv
is from the Development team of the phone, is a "test" rom
matagatoz said:
http://uploaded.to/?id=6u3czv
is from the Development team of the phone, is a "test" rom
Click to expand...
Click to collapse
Hi!
Just reading through the forum here. ggeisler, any luck with that WM6.1 ROM?
HTY/Hantel Q5 - TouchFlo 3d (manilla)
Does anyone know if the new TouchFlo 3D Manilla (as seeon on the HTC Touch Diamond) works on tihs phone? and if so, any particular place I can I can find it to install it on the Hantel Q5 WM6?
Can someone tell me more about this device and it's InfraRed port
I want to know is this the CIR infrared port, so that u can use the device also as a remote controller for your television at about 2 meters distance?
Can someone please try this, I want to know this fact before buying one...
Can you recommend this phone for buying?
Thnx
Jaromirtje said:
Can someone tell me more about this device and it's InfraRed port
I want to know is this the CIR infrared port, so that u can use the device also as a remote controller for your television at about 2 meters distance?
Can someone please try this, I want to know this fact before buying one...
Can you recommend this phone for buying?
Thnx
Click to expand...
Click to collapse
Your best bet is to pose the question to the vendor on this one. Atleast you'll know for sure, otherwise be refunded if any information on the device that is inaccurate after purchase. Hail to eBay and PayPal protection! Seriously though, if the decision to buy this phone is based on a condition of using it for a remote control for your TV, you're best off not buying this device. Anyhow, I`m still waiting for my order of this device to arrive. I`ll test and let you know, but from the specs I read, it didn`t note a CIR infrared port. Anyone?
There is no infrared on this phone that I am aware of. Perhaps other model variants have one.
I have not had a chance to play with the ROM yet but as soon as I have a chance I will try to load it and post back here with the results.
Hantel007 said:
Does anyone know if the new TouchFlo 3D Manilla (as seeon on the HTC Touch Diamond) works on tihs phone? and if so, any particular place I can I can find it to install it on the Hantel Q5 WM6?
Click to expand...
Click to collapse
yes it works but I have only been able to get UPDATE 19 to work and it was verry slow. (ultimately had to remove it) you can install everything into memory fine but you will have very little space left on the device. If you install anything on the SD Card it will be to slow to use.
get it from here
http://forum.xda-developers.com/showthread.php?t=398173
Can someone already confirm if the hty q5 has cir or not....
the respones i got from ebay sellers:
*bestplace4you says it has no infrared at all, de factory is still developing it...
*www.tomtop.com says it is the short range infrared that has to be aimed directly
*light_wholesale says it is with the strong infrared signal (cir)
so still no view on this....
can someone bring the light to this topic...
Jaromirtje said:
Can someone already confirm if the hty q5 has cir or not....
the respones i got from ebay sellers:
*bestplace4you says it has no infrared at all, de factory is still developing it...
*www.tomtop.com says it is the short range infrared that has to be aimed directly
*light_wholesale says it is with the strong infrared signal (cir)
so still no view on this....
can someone bring the light to this topic...
Click to expand...
Click to collapse
NO IR at all
I have the device in my hand, nothing on it looks like it has an ir emitter.
I am sure tomtop is confusing this Q5 with another phone
this one has;
GPS
Bluetooth
Quadband (some models have triband so be careful you may need 850Mhz in some locations)
Edge
2MP Camera
WiFi
WM6 (hopefully upgradable to 6.1 still trying)
TF Card slot capable of up to 4GB (tried 8GB and only read 4)
But still no ir port.
Windows mobile has settings for ir but the hardware just is not there.
so one more time, I can confirm that there is no ir on this phone!
Tha last phone I had with ir sucked using as a remote. I ended up replacing the ir emmiter because the one that was in it was just to weak. the new emmiter worked better however the wavelengths transmitted via ir are not used by all remote controls.
If you want a remote go buy a remote. Using you phone is not the best option.
hey, mine has a 8gb microsd ... and it reads it all
ggeisler said:
yes it works but I have only been able to get UPDATE 19 to work and it was verry slow. (ultimately had to remove it) you can install everything into memory fine but you will have very little space left on the device. If you install anything on the SD Card it will be to slow to use.
get it from here
http://forum.xda-developers.com/showthread.php?t=398173
Click to expand...
Click to collapse
Ahh, Sorry to hear about the perfomance, was really looking forward to getting the interface on this device with smooth operation. One thing to note though, and this is something that I inquired about with the Windows ROM versions, is that my device came installed with Windows Mobile 6.1. I wonder if that would make a difference at all. Anyway, No big deal really. Right now my challenge is to get the GPS working. Keep getting the "No Valid GPS signal" etc.. and I've tried it everywhere.. suggestions? (sigh) Anyway, Thanks for providing me the link for U19, I'll give it a go and see what happens.
This message simply means that is has not locked onto a GPS Satellite signal yet. My phone has taken as long as 10 min to lock on (when indoors). It is significantly faster when outdoors.
FYI
COM: 5
Baud: 4800
(If using TomTom choose "Other NMEA GPS reciever")
If your phone came with WM6.1 would it be possible for you to dump an image of it for all of us with 6.0?
I have been trying to get the Image provided by matagatoz with no success.
I believe that na external program was used to first update the bootloader before updating the ROM. since I nether have this program or the updated bootloader all my attempts to upload this image have failed.
I have even attempted a SD card install but have not found an appropriate combination of file name of image, or key press combo for updating
I found that holding down Power and the End Call button resets device to factory defaults. Holding the end call and pressing the reset does the same thing. I have not found any other key press combination's that do anything else.
Update
Did you try to reboot it using Power + circle button, or turning it on with that combination... is supposed to load teh image file into rom from SD card with that
matagatoz said:
Did you try to reboot it using Power + circle button, or turning it on with that combination... is supposed to load teh image file into rom from SD card with that
Click to expand...
Click to collapse
Any clue as to what to name the image?
I have tried your key combo (reset while pressing circle) and the device shuts off and is unresponsive (nothing on screen) until it is reset again (will not power back on)
I think we may be on to something I think we just need the correct file name.
Currently I have tried;
HTC.nbh
HTY.nbh
ELFIMG.nbh
ELF0IMG.nbh
UPLOADER.IMG
Flash Procedure ( images on DOC inside ROM download RAR )
Xuzhou 999ppc smart phone network
3.13 before the escalation of the original guidelines
Web site: www.999ppc.com
Entities shop Address: Xuzhou Huaihai Road Hongqiao 137 million electronic market on the second floor A2-53
Tel :0516-82580216 Mobile: 13914898099 (晁生), 13092311039 (single Health) QQ: 49360705,65872551 QQ exchange group HTY group: 57,841,094
Taobao shop: http://shop36275237.taobao.com/
First, before the 3.13 version 6.1 upgrade steps:
Note: upgrading the necessary equipment (computers, USB line, leave the battery fixture), veneer, upgraded machine can be used tweezers to connect TP3, TP17 trigger. As a result of individual trigger abnormal escalation after using fake battery upgrade.
1. Intercalation USB line to install drivers. (Installed after the pull-out USB line)
2.2. Open decompression after the upgrade software,
3. Click on the upgrade software, upgrade function keys.
4. Connect USB cable, shorted PCBA contact.
5. Upgrade to connect the success of the upgrade started.
6. The upgrade is complete
Second, after the 3.13 version of Brush Tutorial:
1, to prepare a capacity of less than 1G cards tf.
2, will be available compression package (uploader.img) copied to the card's root directory
3, to ensure that your battery not too little, at least above 50%
4, will be shut down mobile phone and the battery is removed, place will be mounted on a mobile phone
5, copy files to the TF card into the phone TF bed
6, at the same time hold down the "power button + the middle of a round navigation button" after a few seconds the screen "update"
7,几十秒, the phone will automatically re-starting, so Q5 your success on the Brush

Backup from PC & dead Rhodium screen

OK first will start with a complain. Maybe I was unlucky but although I love my Touch Pro 2, I really feel like the Hardware is not that good... Today my screen completeled jamed up (White background with blue/pink/green dots). The phone is still working (I can receive calls, etc...) but cant see a thing
I doubt it's linked to my Windows ROM (Original one) since when I boot up I cannot even see the screen with the ROM/Radio and Booloader version. It's only when I switch the screen on and off that I get the jammed screen (Otherwise it's black). So I can try to Hard reset... but I believe it's rather the video controler that is dead
Anyway... since the phone is still working (Activesync works !) and I stupidly didnt backup my MMS and SMS... I was wondering if someone knew how to back them up from my PC (For contacts and emails they are already backuped through Outlook)
Thanks a lot in adavnce and good luck with your device... (I cnat be 100% negative, I know many freinds who had to return their ipHone... Just pissed off that it happens to me without any particular reason)
Btw anybody got the same problem with their phone and found a way to fix it ? I am just so pissed off to ahve to ship it and wait for weeks without any phone...
Try MyMobiler. I'm in a similar position, my touch screen has stopped working, I can "drive" the phone on my PC using mymobiler.
Good luck!
Gordon
Thanks gonna give it a try to PIM backup before a Hardreset
There are many free to try remote control apps for windows mobile, they work in the same manner as pc remote cotrol apps and allow you to fully control the device from your pc. Google will find them easy.
You can also backup the databases via activesync.
Have you tried a tv out cable, perhaps it's just the device's ribbon cable that is damaged............
Cheers,
Beasty
Looks great
But why the hell my PC is not laucnhing Acivesync when I connect my Touch Pro 2.............. Happened to me in the past with my Hermes and I have no idea why. I am offered to acces to the files or sync my media files but not to sync... Aaahh the worst time for this !!! Gonna google that...
I hope I dont have to enable it on the device... (It reminds me of soemthing on some custom ROMs where you ahve to allow sync through USB... (Though in tis case it's the original ROM and it still proposes to see the device files...)
**** Reinstalled the crappy Activesync (Or Mobile center for the new version) and it worked. Cant believe... the laptop is brand new. Anyway thanks a lot the Software is great and will allow me to save everything

Internet sharing not working right on tilt 2, it did b4 though with no problems

i would greatly appreciate any advice on this matter. well normally, all i had to do was plug my device to the computer, i press Internet sharing on device when the prompt shows, and i connect to internet. Now for some reason it wont and i been trouble shooting all morning and cant figure it out. the only difference is i used my device as a disk drive this morning to put Hdwall program on computer. now when i diconnect and connect again, it lets me select internet sharing but when i press connect, it very quickly says check usb device, it disconnects, then the connect button lights back up again as if i never pressed it. i believe the activesync is blocking me somehow. no settings were changed from b4. i even uninstalled activesync and reinstalled it again in computer(windows xp serv. pack 3). still no luck. i got tired of it n shut computer down..lol can anyone lead me in the right path? how do u disable activesync on device and on computer? so that when i connect device to comp., activesync wont start up and cause issues with internet sharing. i have all the quick fixes to mke device faster, like the memory leak, data fix, no push internet, and dynamic proxy thing. are any of those conflicting with me using internet sharing? cuz i now have hspda/hsup enabled..excuse mispelling. is that the prob? i never had this issue b4. i remember reading that if u connect thru active sync and connect again, the device or computer might not recognize the connection since activesync wasnt really disconnected from first session. how do i reset that to make sure new connection(internetsharing) is recognized versus previous sessions? thnkx in advance
You could just uninstall activesync from the host PC, that would keep it from launching anyway...but I don't know for sure if that's going to get around your issue. Can't hurt to try though.
thnx for the advice. strange how it wrked b4 and not now..lol ima try everything possible b4 hard reseting. for some reason, i believe one of those cabs i downloaded screwed wit somethn. i have data fix, no push internet, dynamic proxy, sd tune up and xda wifi router cabs installed. do u think one of those might be the issue? also, i thght activesync is needed in order for PC to recognize phone. so if i uninstall activesync on computer, will it still recognixe the device and the action im trying to perform(Internet Sharing)? its crazy because it worked fine b4 with activesync in the pc.
demandarin said:
thnx for the advice. strange how it wrked b4 and not now..lol ima try everything possible b4 hard reseting. for some reason, i believe one of those cabs i downloaded screwed wit somethn. i have data fix, no push internet, dynamic proxy, sd tune up and xda wifi router cabs installed. do u think one of those might be the issue? also, i thght activesync is needed in order for PC to recognize phone. so if i uninstall activesync on computer, will it still recognixe the device and the action im trying to perform(Internet Sharing)? its crazy because it worked fine b4 with activesync in the pc.
Click to expand...
Click to collapse
I honestly don't know if internet sharing requires an activesync connection, I'd always believed it worked independently of that (and mutually exclusive), like connecting it as a hard drive does.
Make sure that BTTrayCE.EXE is running at startup (look for BTTrayCE.lnk in the Windows\Startup folder). USB Internet Sharing won't work without that service running, and will act exactly like you describe.
Edit: BTW, I mean look for this on your phone, not your computer...
ill make sure to llook for that...i got a slew of cabs to try out in the morning. i have the TP2 tethering cab(the one that doesnt need mortscript) and the ATT tethering cab. im going to try each 1 and uininstalling right after if it doesnt wrk. i also have total commander and seen where all those registry files are at. i just need something clarified for me. When they say, change this(meaning the last line of that reg. file) to this(meaning the edit needed to be ), Is it Simply just Renaming that particular file or part of file? or is it deleting that file and somehow adding one that says the new edit? im confident ill have it tethering soon. at least my xda wifi router wrks perfectly..lol
demandarin said:
ill make sure to llook for that...i got a slew of cabs to try out in the morning. i have the TP2 tethering cab(the one that doesnt need mortscript) and the ATT tethering cab. im going to try each 1 and uininstalling right after if it doesnt wrk. i also have total commander and seen where all those registry files are at. i just need something clarified for me. When they say, change this(meaning the last line of that reg. file) to this(meaning the edit needed to be ), Is it Simply just Renaming that particular file or part of file? or is it deleting that file and somehow adding one that says the new edit? im confident ill have it tethering soon. at least my xda wifi router wrks perfectly..lol
Click to expand...
Click to collapse
Changing values in your registry is a matter of navigating to that registry key in your reg editor, clicking on the entry to bring up the dialog to change the value, and then changing it to whatever is specified (a number, a string, whatever), then just clicking 'ok' to save. It looks a lot like a regular file structure, but it operates a bit differently.
I would STRONGLY recommend using whatever regedit tool you prefer to make a backup copy of your registry before making any changes in it...just in case
Got my Tilt 2 tethering again ;-)
IM BACKKKKKKK...lol I am typing now through the tethered connection. lmao this forum is da bomb. i tried again this mornin with nothing added to phone, like fixes, and it wouldnt let me connect. same as b4. I downloaded the ATT Tethering Cab fix, and like magic it worked. It added the option to let me select media net for connection and it connected with no problem. so if you are having issues connecting like i did b4, try the free ATT Tethering Cab fix on this forum. It worked for me directly right after install. Many thanks and credit goes to whoever created this file. i am really liking this forum. so much info in here. learning new stuff everyday. I thought i was already a tech head, but once i came to this forum, i saw the wild modding and rom flashes, and etc.. people are doing. Give me some time, with this forum, i will be flashing roms also..lol I hope. also thanks to people who gave me some advice and encouraged me to solve the problem. With some research and reading, nothing is impossible.

Categories

Resources