hi
I have some questions,sorry for my bad English
I try to find them,so I use search and also try to see last 10 page posts in all artemis section!!!!! some of my questions are remain and I cant find my answers :
1- can I use my GPS module in PC ? like an external usb GPS module ?
(i read we can use GPRS by USB_MODEM and cant use WI-FI card ... what about GPS ?)
2- is there any differnce between charge in ACTIVESYNC or when artemis is off and not in activesync (just 10day witch i bought p3300 and not test it yet,but i think it is faster when is not in activesync...)
3-how can I disable charging when i am in activesync ? (i think it is better for battry to FULL charge it and let too rich 5-10% of charge and then plug charger! (please let me know is it true ? ) but when i try to instal any program,it start charging ) is it any way to disable charging ... ?
4-how can i add hand writing recognization too windows mobile 6 in NOTE ?
5-USB 1.1 is very slow in activesync!!! but when we use mobile to be a MASS STORAGE it is going to be slower ... memory crad is under sim card and sim card is under battry!!
so is there any better way to connect memory to PC !!?
6-in manual,it say our GPS can get data from 20 satelite,but never i can find more than 12sat. is there any problem ?
7-in WM5,in contacts,I can see both mobile and simcard numbers,but in SM6 i cant
khepelesibilo said:
1- can I use my GPS module in PC ? like an external usb GPS module ?
(i read we can use GPRS by USB_MODEM and cant use WI-FI card ... what about GPS ?)
Click to expand...
Click to collapse
Yes, You can. Use GPS Gate, homepage, wizard
3 == it's a myth! that one should not charge a full or almost full batt
it was true wayyyyy back with ni'cad batts but li'ion batts benefit from being charged often but letting the batt wear down on li-ion batts on the other hand harm them
5 == putting the sd card in a sd reader on the pc which support usb2 is the fastest way to get files from the pc to the pda
6 == if your location only have access to that nr of satelites thats what you will get they are Geostationary
http://en.wikipedia.org/wiki/Geostationary
khepelesibilo said:
1- can I use my GPS module in PC ? like an external usb GPS module ? (i read we can use GPRS by USB_MODEM and cant use WI-FI card ... what about GPS ?)
Click to expand...
Click to collapse
Here's a description how to do that. Never tried on my own so i don't know if it is working well...
khepelesibilo said:
4-how can i add hand writing recognization too windows mobile 6 in NOTE ?
Click to expand...
Click to collapse
Which ROM u are using ? In a default ROM you can choose SIP between Block Recognizer, Letter Recognizer and Transcriber.
Isn't it that you're searching ? In some ROMs they are disabled/removed
khepelesibilo said:
5-USB 1.1 is very slow in activesync!!! but when we use mobile to be a MASS STORAGE it is going to be slower ...
memory crad is under sim card and sim card is under battry!! so is there any better way to connect memory to PC !!?
Click to expand...
Click to collapse
IMO it's enough for syncing PIM data and little cabs etc. If you want to copy big files (TomTom maps for example), i would use a card reader....
khepelesibilo said:
6-in manual,it say our GPS can get data from 20 satelite,but never i can find more than 12sat. is there any problem ?
Click to expand...
Click to collapse
I don't think so. you can find, but i think it is depending on weather, location and other influences...so don't worry about that.
khepelesibilo said:
7-in WM5,in contacts,I can see both mobile and simcard numbers,but in SM6 i cant
Click to expand...
Click to collapse
Not quiet sure, but i think with this regkey you can enable your SIM contacts:
[HKEY_CURRENT_USER\ControlPanel\Phone]
"ShowSim"=dword:1
khepelesibilo said:
6-in manual,it say our GPS can get data from 20 satelite,but never i can find more than 12sat. is there any problem ?
Click to expand...
Click to collapse
It has 20 channels but can use only 12 at the same time... so 12 is the maximum amount... never get more with artemis...
thank you for your answers
I am trying Artemis Touch 2.1 ROM ,but too problems and I think i mut change it to Black & Blue v4.3 (also it looks newer version...) please let me know any other opinion ....
now I can use my phnoe like GPS module , I know there is not any overclock for USB port ,I can't disable charging in activesync mode ,handwriting recognization and simcart numbers may solve by changin ROM! also my GPS works fine and no GPS unit can see more than 12 sat. !!because they are 24sat on world and we cant see sat.s on other side of world!!
so please let me to ask some other Q. :
1-please let me know best way of charging my mobile to have a long batry life!
2-can i have a better VIDEO CAPTURing ? i think nokia 6600 can capure video better than my p3300 !!!
khepelesibilo said:
1-please let me know best way of charging my mobile to have a long batry life!
Click to expand...
Click to collapse
Withe Li'Ion batteries, it doesnt make a difference how often you charge, as long as you end up with 100%. if you want a better battery life, have a look at this thread: http://forum.xda-developers.com/showthread.php?t=328749
khepelesibilo said:
2-can i have a better VIDEO CAPTURing ? i think nokia 6600 can capure video better than my p3300 !!!
Click to expand...
Click to collapse
The Camera on the Artemis is crap. dont expect any more!
Hi there.
This is my first post here.
I have a P3300 and I'm searching for the same: disable charging while USB to PC cable is connected (at least when I want).
My experience with cell phone batteries tell me that I can agree with Rudegar in one way but not in the other. I believe that start charging before the battery is almost empty is not the problem, the really problem is stop the charge before the battery is full.
So, I want to disable charging not exactly to avoid charging the PDA but to eliminate the problem of interrupting a charge before it is completed. Ex: I have 50% of battery and want to load some files I'll need to use in a meting; I plug the USB cable; it starts to charge; I copy the files; after a few minutes of charging and copying the files are copied and the battery is at 55%; I disconnect the cable and of course the charging is interrupted and that I believe is not good for the battery by experience in other occasions.
If any one knows a pluggin to solve this problem, please tell me.
Best Regards,
Cidi Rome.
Update.
I've made a test suggested by other users (don't know if it was here too, but I googled arround) that I inform that, at least, with P3300 don't work. That is to cut/disconnect the +5V pin from the usb port/cable. When that is done the PC/PDA don't recognize each other and nothing happens.
I think this feature is a must, I can't believe that so little people is searching for it....
Best Regards.
Related
Hi all,
I recently migrated from old Handspring Treo 180g (PalmOS smartphone)
to new MDA III and now, only one thing miss me, a little utility (called TreoTools), which was able control switch on/off of GSM module by a sheduling.
So i was able to shedule to turn off module everyday at midnight and turn on back 8:40am at workdays and 11:00am at weekends.
This greatly improvement battery life on that device.
PLEASE, does anybody know, if exists similar utility for MDA III ?
Thanks alot !
Hi,
I think this software will help you
Thank very much !
This utility works perfectly, but do only a radio off (as its names). Unfortunately this can't do a "tooggle", and when is radio already off, popups an error message.
OK, there is other utility, shipped with MDAIII, RestartRadio.exe to turn radio ON. Unfortunately, it needs to launch twice, when radio is off :evil: .
Code:
EDIT: Hey, i discovered, that RestartRadio.exe DO a radio togle !
Any idea, how with this two (now one) utilities do a daily shedule? Turn off at midnights, and mornigs turn ON? Some scheduler, that can launching .exe at specified time ?
Thx
How about PocketZenPhone
how about this .. its for himalaya i dont know if will work on blue angel
http://www.phonesnooze.com/PS/
http://www.pocketgear.com/software_detail.asp?id=6614
..
toenailed said:
how about this .. its for himalaya i dont know if will work on blue angel
http://www.phonesnooze.com/PS/
http://www.pocketgear.com/software_detail.asp?id=6614
..
Click to expand...
Click to collapse
It look exactly i need !!! but it cannot be download, i get
Code:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.
/PS/GetDownload.asp, line 42
Could someone post this "PocketZenPhone_4_5_1.arm.CAB" here ?
http://zendrui.free.fr/index.htm
Ace-steal said:
toenailed said:
how about this .. its for himalaya i dont know if will work on blue angel
http://www.phonesnooze.com/PS/
http://www.pocketgear.com/software_detail.asp?id=6614
..
Click to expand...
Click to collapse
It look exactly i need !!! but it cannot be download, i get
Code:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.
/PS/GetDownload.asp, line 42
Could someone post this "PocketZenPhone_4_5_1.arm.CAB" here ?
Click to expand...
Click to collapse
use the pocketgear link you can download it there ..... anyway i uploaded the files, here sthe evaluation version of PhoneSnooze 2.0 and the PocketZenPhone 4.51
for newer version of pocketzenphone you need to buy it here
http://www.handango.com/PlatformPro...ctionId=0&catalog=30&txtSearch=pocketzenphone
or here
http://zendrui.free.fr/download.htm
..
I was were busy for last few days.
Want to thanx all, who tried to help me !!
I tryed these software utilities, and it seems, that PhoneSnooze work perfectly with MDAIII !!!! Thanx again.
P.S. i find yet another program for this task:
http://www.slipstreamsolutions.co.uk/products/mPhoneSchedule.htm
The difference between PhoneSnooze and PhoneShedule is, that PhoneShedule plays a sounds while phone is switched on/off (it is good to know, that phone going off or on) and can also switching power to BlueTooth !! But seem to be little unstabled. (maybe due WM2003SE)
could you post a link to restart radio.exe?
I tried an eval. version of mPhoneSchedule and although the interface is great and it looks quite a good program, I found the following serious problems.
-Does not schedule properly when phone power is off. Specifically I mean when the radio is on and the phone is sleeping, i.e nothing is on the screen it will not turn radio off. Seems a bit ridiculous. I am trying to save power, why would I want to require that the device be fully on to turn the radio off.
-Only will turn BT on/off with radio if you have Microsoft BT, not Broadcom.
I am still also searching for a tool that accomplishes this. Can anyone chime in on the review above. Does PocketZenPhone have the limitations above?
I don't know much about setting up GPS. With the wm6 rom it has enternal gps in the setting menu, so I have google map program but it won't track my location. Is it anything I need change or buy to make it work?
so upgrading to WM6 giving you GPS capacity on your Hermes? Did you also notice that your camera got upgraded 5 Megapixel?
I have WM6 but I don't know how to get it to work. Oh I never notice the camera I haven't use it since the upgrade, I'll try it out.
nice... 5MP hehe
the_passenger said:
so upgrading to WM6 giving you GPS capacity on your Hermes? Did you also notice that your camera got upgraded 5 Megapixel?
Click to expand...
Click to collapse
lol...thats mean!
An other secret feature I found!!
the_passenger said:
so upgrading to WM6 giving you GPS capacity on your Hermes? Did you also notice that your camera got upgraded 5 Megapixel?
Click to expand...
Click to collapse
You forgot to mention you should wait until you're batterypower is down to 50%, try to shake your phone as hard as you can...and if you're lucky (and you have the right type of phone offcourse) it's also possible to increase the storage room on your device
But what about the GPS working on google maps. Is it possible, or I need more software. There are difference com ports which one do you use?
don't worry about them... You need to buy a external gps reciever as the hermes doesn't come with one. thats why it says external gps. telenav has a pretty good one. buy that setup your com ports and then run google maps it should work.
the_passenger said:
so upgrading to WM6 giving you GPS capacity on your Hermes? Did you also notice that your camera got upgraded 5 Megapixel?
Click to expand...
Click to collapse
freeborock said:
I have WM6 but I don't know how to get it to work. Oh I never notice the camera I haven't use it since the upgrade, I'll try it out.
Click to expand...
Click to collapse
Now that is some funny ****
The best upgrade I noticed after updating to WM6 is I now pay half price for data usage and the second best reason to upgrade to WM6 is the instant 3 megapixle increase on my camera taking it to 5 mp... cant wait till WM7
freeborock said:
I don't know much about setting up GPS. With the wm6 rom it has enternal gps in the setting menu, so I have google map program but it won't track my location. Is it anything I need change or buy to make it work?
Click to expand...
Click to collapse
You'll need to have an external GPS module for that; the Hermes does not have a GPS. The icon is just for connecting from the OS to your external device. It's worthless without that external GPS module.
Hi, has anyone managed to get a SDHC card to work with WM5? i have tried a couple of different CAB files, but non have worked. I cant change my ROM, so CAB files are the only option
just curious, but why can't you change the ROM ???
Is it a technical problem, or a company owned phone that you don't want to fiddle with ??
mbxiom said:
just curious, but why can't you change the ROM ???
Is it a technical problem, or a company owned phone that you don't want to fiddle with ??
Click to expand...
Click to collapse
Technical, doesnt sync with USB anymore, caused by charging the phone in the car while starting the engine, causes a spike in the current = blown USB board... still charges tho!
caused by charging the phone in the car while starting the engine, causes a spike in the current = blown USB board
Click to expand...
Click to collapse
Ouch......I'll have to remember to keep plugging in AFTER starting car.
mbxiom said:
Ouch......I'll have to remember to keep plugging in AFTER starting car.
Click to expand...
Click to collapse
yeh good plan
so, anyone got any info on SDHC drivers?
Do an upgrade by microSD card if your usb port doesnt work anymore
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
gghh said:
Do an upgrade by microSD card if your usb port doesnt work anymore
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Click to expand...
Click to collapse
what about doing the CID unlock? does anyone know of a way of doing this with out USB? is it possible to do using a Bluetooth sync?
Cheers
mugglesquop said:
Hi, has anyone managed to get a SDHC card to work with WM5? i have tried a couple of different CAB files, but non have worked. I cant change my ROM, so CAB files are the only option
Click to expand...
Click to collapse
Unless anyone knows better, the problem isn't with WM5, it's with the hardware. SDHC still doesn't work after upgrade to WM6.
Edited an hour later: yes, I'm glad to say someone does know better I tried this about 4 months ago and it didn't work, but I just had a look and there is now a later (and much larger) .CAB than the one I installed last time, and this one works! Excellent news, never been so pleased to have been wrong. But I am running WM6.
Rgds, Andy
sooooo... can anyone answer my question?
Yes, i am interesting in patch for sdhc wm5 because there is no problem of memory with wm5.
If a developper can help us, we would be very happy !!
Sorry for my poor English !!
Bump. Can anyone help us WM5 users?
*Bump* *again*
There must be a answer to this...
Anyone can answer ?
*more bumps*
Surely there is an answer to this! Have SpbMobile Shell 2.0 installed, which is very flashy and nice. The icing on the cake would be more storage memory!
I just purchased this phone and after extensive searching was unable to find any information regarding modifying the ROM.
This Quad Band Phone has the following features;
2.8" touchscreen
TI OMAP 1030 (ARM926T)
128 Rom 64 RAM
WM6.0
GPS
WiFi
Bluetooth 2.0
GPRS Edge
2Mp Camera
Microsim slot that supports up to 4GB T flash Card
I was wondering if there were some generic modding tools / instructions to extract and modify the ROM.
I primarily want to do this because the WM6.0 OS does not seem to be complete. e.g. the HKLM/Software/OEM/PhoneSetting key is not there and when added with the key ShowTimeZonePage there is no change. (this was done manually and with the HTC Registry wizard
I would also like to trim down unneeded programs to maximize the storage space and perhaps add the TF2D to the ROM.
TF2D installed perfectly on this device however takes the majority of my RAM limiting what I can install in there.
I read somewhere that this was an HTC Diamond Clone. While I do see the simular design I doubt the hardware is the same. Even still I have to ask. would the HTC software and ROM's work with this Phone?
One last question. Would it be possible to upgrade the OS to WM 6.1 using an existing ROM Image? I doubt it but had to ask. I am sure that I will have to dump the ROM from the phone and use that image to edit.
Please let me know your thoughts. Good or bad.
I hope to be able to modify this phone and if not that is ok because it is still a good phone as is. I was just hoping to get more out of it.
i have the same phone
hey, i have the same phone ... did you found anything about modding it ?
I was able to dump the ROM however since part of it is SRPK encoded I was unable to do anything with it.
I Have a more detailed thread on what I was able to accomplish going here
http://forum.xda-developers.com/showthread.php?t=455233
If you get any farther please share.
I Found the Rom for WM6.1
Hey, i found the rom for WM6.1 its an img file, but, i dont know how to procede, tell me how to send you, to test.
upload the file to this site
http://uploaded.to/
and post the link here
Are you sure this is for the hTY Q5? Where did you find it?
Rom
http://uploaded.to/?id=6u3czv
is from the Development team of the phone, is a "test" rom
matagatoz said:
http://uploaded.to/?id=6u3czv
is from the Development team of the phone, is a "test" rom
Click to expand...
Click to collapse
Hi!
Just reading through the forum here. ggeisler, any luck with that WM6.1 ROM?
HTY/Hantel Q5 - TouchFlo 3d (manilla)
Does anyone know if the new TouchFlo 3D Manilla (as seeon on the HTC Touch Diamond) works on tihs phone? and if so, any particular place I can I can find it to install it on the Hantel Q5 WM6?
Can someone tell me more about this device and it's InfraRed port
I want to know is this the CIR infrared port, so that u can use the device also as a remote controller for your television at about 2 meters distance?
Can someone please try this, I want to know this fact before buying one...
Can you recommend this phone for buying?
Thnx
Jaromirtje said:
Can someone tell me more about this device and it's InfraRed port
I want to know is this the CIR infrared port, so that u can use the device also as a remote controller for your television at about 2 meters distance?
Can someone please try this, I want to know this fact before buying one...
Can you recommend this phone for buying?
Thnx
Click to expand...
Click to collapse
Your best bet is to pose the question to the vendor on this one. Atleast you'll know for sure, otherwise be refunded if any information on the device that is inaccurate after purchase. Hail to eBay and PayPal protection! Seriously though, if the decision to buy this phone is based on a condition of using it for a remote control for your TV, you're best off not buying this device. Anyhow, I`m still waiting for my order of this device to arrive. I`ll test and let you know, but from the specs I read, it didn`t note a CIR infrared port. Anyone?
There is no infrared on this phone that I am aware of. Perhaps other model variants have one.
I have not had a chance to play with the ROM yet but as soon as I have a chance I will try to load it and post back here with the results.
Hantel007 said:
Does anyone know if the new TouchFlo 3D Manilla (as seeon on the HTC Touch Diamond) works on tihs phone? and if so, any particular place I can I can find it to install it on the Hantel Q5 WM6?
Click to expand...
Click to collapse
yes it works but I have only been able to get UPDATE 19 to work and it was verry slow. (ultimately had to remove it) you can install everything into memory fine but you will have very little space left on the device. If you install anything on the SD Card it will be to slow to use.
get it from here
http://forum.xda-developers.com/showthread.php?t=398173
Can someone already confirm if the hty q5 has cir or not....
the respones i got from ebay sellers:
*bestplace4you says it has no infrared at all, de factory is still developing it...
*www.tomtop.com says it is the short range infrared that has to be aimed directly
*light_wholesale says it is with the strong infrared signal (cir)
so still no view on this....
can someone bring the light to this topic...
Jaromirtje said:
Can someone already confirm if the hty q5 has cir or not....
the respones i got from ebay sellers:
*bestplace4you says it has no infrared at all, de factory is still developing it...
*www.tomtop.com says it is the short range infrared that has to be aimed directly
*light_wholesale says it is with the strong infrared signal (cir)
so still no view on this....
can someone bring the light to this topic...
Click to expand...
Click to collapse
NO IR at all
I have the device in my hand, nothing on it looks like it has an ir emitter.
I am sure tomtop is confusing this Q5 with another phone
this one has;
GPS
Bluetooth
Quadband (some models have triband so be careful you may need 850Mhz in some locations)
Edge
2MP Camera
WiFi
WM6 (hopefully upgradable to 6.1 still trying)
TF Card slot capable of up to 4GB (tried 8GB and only read 4)
But still no ir port.
Windows mobile has settings for ir but the hardware just is not there.
so one more time, I can confirm that there is no ir on this phone!
Tha last phone I had with ir sucked using as a remote. I ended up replacing the ir emmiter because the one that was in it was just to weak. the new emmiter worked better however the wavelengths transmitted via ir are not used by all remote controls.
If you want a remote go buy a remote. Using you phone is not the best option.
hey, mine has a 8gb microsd ... and it reads it all
ggeisler said:
yes it works but I have only been able to get UPDATE 19 to work and it was verry slow. (ultimately had to remove it) you can install everything into memory fine but you will have very little space left on the device. If you install anything on the SD Card it will be to slow to use.
get it from here
http://forum.xda-developers.com/showthread.php?t=398173
Click to expand...
Click to collapse
Ahh, Sorry to hear about the perfomance, was really looking forward to getting the interface on this device with smooth operation. One thing to note though, and this is something that I inquired about with the Windows ROM versions, is that my device came installed with Windows Mobile 6.1. I wonder if that would make a difference at all. Anyway, No big deal really. Right now my challenge is to get the GPS working. Keep getting the "No Valid GPS signal" etc.. and I've tried it everywhere.. suggestions? (sigh) Anyway, Thanks for providing me the link for U19, I'll give it a go and see what happens.
This message simply means that is has not locked onto a GPS Satellite signal yet. My phone has taken as long as 10 min to lock on (when indoors). It is significantly faster when outdoors.
FYI
COM: 5
Baud: 4800
(If using TomTom choose "Other NMEA GPS reciever")
If your phone came with WM6.1 would it be possible for you to dump an image of it for all of us with 6.0?
I have been trying to get the Image provided by matagatoz with no success.
I believe that na external program was used to first update the bootloader before updating the ROM. since I nether have this program or the updated bootloader all my attempts to upload this image have failed.
I have even attempted a SD card install but have not found an appropriate combination of file name of image, or key press combo for updating
I found that holding down Power and the End Call button resets device to factory defaults. Holding the end call and pressing the reset does the same thing. I have not found any other key press combination's that do anything else.
Update
Did you try to reboot it using Power + circle button, or turning it on with that combination... is supposed to load teh image file into rom from SD card with that
matagatoz said:
Did you try to reboot it using Power + circle button, or turning it on with that combination... is supposed to load teh image file into rom from SD card with that
Click to expand...
Click to collapse
Any clue as to what to name the image?
I have tried your key combo (reset while pressing circle) and the device shuts off and is unresponsive (nothing on screen) until it is reset again (will not power back on)
I think we may be on to something I think we just need the correct file name.
Currently I have tried;
HTC.nbh
HTY.nbh
ELFIMG.nbh
ELF0IMG.nbh
UPLOADER.IMG
Flash Procedure ( images on DOC inside ROM download RAR )
Xuzhou 999ppc smart phone network
3.13 before the escalation of the original guidelines
Web site: www.999ppc.com
Entities shop Address: Xuzhou Huaihai Road Hongqiao 137 million electronic market on the second floor A2-53
Tel :0516-82580216 Mobile: 13914898099 (晁生), 13092311039 (single Health) QQ: 49360705,65872551 QQ exchange group HTY group: 57,841,094
Taobao shop: http://shop36275237.taobao.com/
First, before the 3.13 version 6.1 upgrade steps:
Note: upgrading the necessary equipment (computers, USB line, leave the battery fixture), veneer, upgraded machine can be used tweezers to connect TP3, TP17 trigger. As a result of individual trigger abnormal escalation after using fake battery upgrade.
1. Intercalation USB line to install drivers. (Installed after the pull-out USB line)
2.2. Open decompression after the upgrade software,
3. Click on the upgrade software, upgrade function keys.
4. Connect USB cable, shorted PCBA contact.
5. Upgrade to connect the success of the upgrade started.
6. The upgrade is complete
Second, after the 3.13 version of Brush Tutorial:
1, to prepare a capacity of less than 1G cards tf.
2, will be available compression package (uploader.img) copied to the card's root directory
3, to ensure that your battery not too little, at least above 50%
4, will be shut down mobile phone and the battery is removed, place will be mounted on a mobile phone
5, copy files to the TF card into the phone TF bed
6, at the same time hold down the "power button + the middle of a round navigation button" after a few seconds the screen "update"
7,几十秒, the phone will automatically re-starting, so Q5 your success on the Brush
Hey guys i got i brand new LG KS20 and I'm new to these type of phones. I need some advices.
First of all I don't want to use anything illegal. If it's needed I can buy winmo 6.5 or whatever if it's possible.
Should I upgrade winmo ?
Is it legal ?
Are there any update buttons in the phone for it ?
Can I update firmware or some kind of that stuff legally ?
Is this ie supports flash ?(I haven't tested it yet)
If I ever do a mistake while upgrading are there any ways to turn all the way back ?
I have a cd but I don't think it has winmo 6.0 installer. What if anything happens to winmo how could I format and install winmo again ?
Hello and welcome to the forum.
Did a quick search on the forum you will find all the answers to the questions you ask yourself, and more!
Can you tell us your OS version of your ROM, date and other information available in Settings / System Information.
Thank you and goodbye.
Arthemus.
Hi,
thanks for the reply. I'm waiting for the phone i bought it today online. In pdadb it says Microsoft Windows Mobile 6 Professional AKU 0.4.5. I'm a bit excited about this phone so I couldn't wait to open a thread .
Should I look for winmo 6.0 topics or ks20 topics for my problems ?
Ks20 topic
Give us the characteristics of your KS20 as soon as possible you may be willing driver updated.
By.
hi i got my phone
os: windows mobile 6 os 5.2.1630(build 18139.0.4.10)
rom: v10d
bootloader: v10d
modem firmware: v10d
rom date: 2008-05-08
i have some problems. this phone is always trying to connect gprs . in the wireless connections phone is always on with the internet(isp i think) setting. how can I disable that and why is it always turning on automatically. i installed opera mobile but i think i cant view flash websites. windows update is not working it says check connection and time settings but they're all good im surfing via opera.
s2u2 is not working the way i like. it's locking too soon even i set up the backlight and the s2u2 settings.
in the today view can i replace the ie icon with opera icon ?
the phone is fully charged in 1 or 2 hours is that normal
any thoughts
ExpDisease said:
hi i got my phone
os: windows mobile 6 os 5.2.1630(build 18139.0.4.10)
rom: v10d
bootloader: v10d
modem firmware: v10d
rom date: 2008-05-08
i have some problems. this phone is always trying to connect gprs . in the wireless connections phone is always on with the internet(isp i think) setting. how can I disable that and why is it always turning on automatically. i installed opera mobile but i think i cant view flash websites. windows update is not working it says check connection and time settings but they're all good im surfing via opera.
s2u2 is not working the way i like. it's locking too soon even i set up the backlight and the s2u2 settings.
in the today view can i replace the ie icon with opera icon ?
the phone is fully charged in 1 or 2 hours is that normal
Click to expand...
Click to collapse
1. on Today menu, tap the row showing the carrier company name would open a manager, which you can enable/disable Phone/Bluetooth/Wi-Fi there
2. Extra plug-in is needed to view flash content, but the processor of KS20 is TOO slow and I strongly discourage you to do so (or probably you phone will hang when there are flash advertisement)
3. Windows Update does not work is normal and it never works, and is it not necessary to do why (Why not directly flash another ROM to update?)
4. If S2U2 locks too soon, disable its auto lock function and let it locks only when the phone sleeps
5. The phone is fully charged in just more than 1 hours when the charger or 2-3 hours when using USB, it's normal
and another thing is the start menu's background. How can I change it without changing the today background
also i searched for stopping the sent message notification sound but i couldn't find
Should I charge the phone when the battery is empty.
Does stopping the charging in the middle harm batterys life or something
ExpDisease said:
Should I charge the phone when the battery is empty.
Does stopping the charging in the middle harm batterys life or something
Click to expand...
Click to collapse
for lithium-ion batteries
it is harmful when you either ofter fully charge or fully discharge the battery
the battery usually have a longer lifespan if you don't use it up and don't charge it to full
I really need to install flash for opera mobile and internet explorer mobile. Watching videos with buffering in media player is really painful. I really need flash. So can you help me with it