Hi all,
I recently migrated from old Handspring Treo 180g (PalmOS smartphone)
to new MDA III and now, only one thing miss me, a little utility (called TreoTools), which was able control switch on/off of GSM module by a sheduling.
So i was able to shedule to turn off module everyday at midnight and turn on back 8:40am at workdays and 11:00am at weekends.
This greatly improvement battery life on that device.
PLEASE, does anybody know, if exists similar utility for MDA III ?
Thanks alot !
Hi,
I think this software will help you
Thank very much !
This utility works perfectly, but do only a radio off (as its names). Unfortunately this can't do a "tooggle", and when is radio already off, popups an error message.
OK, there is other utility, shipped with MDAIII, RestartRadio.exe to turn radio ON. Unfortunately, it needs to launch twice, when radio is off :evil: .
Code:
EDIT: Hey, i discovered, that RestartRadio.exe DO a radio togle !
Any idea, how with this two (now one) utilities do a daily shedule? Turn off at midnights, and mornigs turn ON? Some scheduler, that can launching .exe at specified time ?
Thx
How about PocketZenPhone
how about this .. its for himalaya i dont know if will work on blue angel
http://www.phonesnooze.com/PS/
http://www.pocketgear.com/software_detail.asp?id=6614
..
toenailed said:
how about this .. its for himalaya i dont know if will work on blue angel
http://www.phonesnooze.com/PS/
http://www.pocketgear.com/software_detail.asp?id=6614
..
Click to expand...
Click to collapse
It look exactly i need !!! but it cannot be download, i get
Code:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.
/PS/GetDownload.asp, line 42
Could someone post this "PocketZenPhone_4_5_1.arm.CAB" here ?
http://zendrui.free.fr/index.htm
Ace-steal said:
toenailed said:
how about this .. its for himalaya i dont know if will work on blue angel
http://www.phonesnooze.com/PS/
http://www.pocketgear.com/software_detail.asp?id=6614
..
Click to expand...
Click to collapse
It look exactly i need !!! but it cannot be download, i get
Code:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.
/PS/GetDownload.asp, line 42
Could someone post this "PocketZenPhone_4_5_1.arm.CAB" here ?
Click to expand...
Click to collapse
use the pocketgear link you can download it there ..... anyway i uploaded the files, here sthe evaluation version of PhoneSnooze 2.0 and the PocketZenPhone 4.51
for newer version of pocketzenphone you need to buy it here
http://www.handango.com/PlatformPro...ctionId=0&catalog=30&txtSearch=pocketzenphone
or here
http://zendrui.free.fr/download.htm
..
I was were busy for last few days.
Want to thanx all, who tried to help me !!
I tryed these software utilities, and it seems, that PhoneSnooze work perfectly with MDAIII !!!! Thanx again.
P.S. i find yet another program for this task:
http://www.slipstreamsolutions.co.uk/products/mPhoneSchedule.htm
The difference between PhoneSnooze and PhoneShedule is, that PhoneShedule plays a sounds while phone is switched on/off (it is good to know, that phone going off or on) and can also switching power to BlueTooth !! But seem to be little unstabled. (maybe due WM2003SE)
could you post a link to restart radio.exe?
I tried an eval. version of mPhoneSchedule and although the interface is great and it looks quite a good program, I found the following serious problems.
-Does not schedule properly when phone power is off. Specifically I mean when the radio is on and the phone is sleeping, i.e nothing is on the screen it will not turn radio off. Seems a bit ridiculous. I am trying to save power, why would I want to require that the device be fully on to turn the radio off.
-Only will turn BT on/off with radio if you have Microsoft BT, not Broadcom.
I am still also searching for a tool that accomplishes this. Can anyone chime in on the review above. Does PocketZenPhone have the limitations above?
Related
Hello people
I just got a new XDA IIs from O2.
This thread will hopefully serve purpose to all other new users of the XDA IIs as well.
I just got it and wondering how I can get the best of it like all you lot. You all seem to know quite a lot about it.
Here are the details I managed to pull out from it.
ROM version: 1.31.00 WWE
ROM date: 12/03/04
Radio version: 1.06.00
Protocol version: 1337.38
ExROM versiom: 1.31.139 WWE
Windows Mobile 2003 SE
Version: 4.21.1088 (Build 14132)
Processor Intel(R) PXA263
Bluetooth for Windows CE
BT-PPC/PE Version 1.0.0 Build 3500
I beleive I need to update this to the latest of whatever is out there. I dont know what good they would do to the PDA either.
From reading some of the posts here on the forum, I managed to find out about Battery Pack Pro v2 and ewallet. These are the only 2 software I installed. Oh yes, I got hold of serial keys for both of these so anyone who needs the serials, your problem is solved. Just sent me a msg.
Futhermore, I have installed the GPRS monitor which I cant find much use of.
Other software:
Skype
Macromedia flash player
FonixVoiceDial
I have beebn browsing on the GPRS alot as well, I would apreciate confirmation that GPRS on o2 is free.
I was wondering how to upgrade the windows media player 9.
As you all can see, I just got it and trying to get the most of it. Any help would be apreciated. All the newbies check the thread as much as possible, someone is bound to help.
I just purchased a backup copy of tomtom 5 from ebay for a few quid (not original apparently). He is shipping it soon. The guy claims its unlocked etc. I hope I can make it work. Any advice?
I will purchase an SD card and bluetooth receiver soon for tomtom. Anything I need to know before I do ?
I was wondering what games I can put on it as well. I can come up with so many questions. I have been looking at other posts as well. For instance, fixing the camera drivers for better picture quality and playing an MP3 as a ringtone. These threds are started where the problem arises rather than how to do it from scratch, so a bit lost there.
I am just looking for some free advice. God bless.
First off ditch the O2 rubbish that came with the phone ( the active interface) it will reduce the number of times it crashes - hard reset then when prompted select Corporate user and enter 0506 as the key. As for TT5 it works fine with my O2XDAII2 but NOT with bluetooth GPS - I use bluetooth for my headset and found it terminated the GPS when I hang up from a call - now using a wired GPS and BT headset its all fine. As for MP3 as a ringtone put it on the PDA nav to it in file explorer tap and hold then from the pop up box select "set as ringtone" - works fine for me. You do have the latest firmware / OS as far as O2 is concerned, others can comment if this is any good or not. One other tip if when you make a call or answer an inbound there is no one there - i.e. you can't hear anyone, select bluetooth on then off and re-make the call - don't know why it does this as its real anoying - Finally had two bills from O2 since I got my XDA and neither had any charge pertainin to the use of GPRS, and I was using it but not too much as I use WIFI its quicker and free in my local pub!! mike
Hey and thanks for responding.
So you reckon a hard reset wout fix the crashes eh, I'll have to try that, just that I installed a lot of stuff on this and would need to purchase an SD card to do all the backup. All in good time though.
I tried out what you said about navigating to the MP3 file and then holding down choosing SET AS RINGTONE thing, there is no such option on my set. Maybe some sort of driver needs to be installed?
Thanks for the tip for the GPS wired set. I will definitely go for that. I am using the Nokia bluetooth headset, do you think I should switch to Jabra BT250?
Can anyone comment on the ROM updates?
What is Radio? What does that mean?
Alitech,
Have a read through this first:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
Thanks for the link. I have checked it out. I will take it slow with the updates, dont want to muck up you know.
You seem to have all the latest Roms installed. Well done.
alitech said:
Can anyone comment on the ROM updates?
What is Radio? What does that mean?
Click to expand...
Click to collapse
radio is the software that turns the pda into a mobile fone, also functions the bluetooth, tho i am led to beleive that, so someone correct me if i am wrong,
you are on o2's rom of 1.31.00 WWE, you seriously need to upgrade, but not on an o2 rom, i would suggest an upgrade to 1.40, but only if you dont mind playing with it, cos first timers tend to need help after they cannot get it to startup again, lol, many a time i have helped people after this, lol, but imate 1.40 is a good rom, which i use and it is as stable as it is ever going to get, there is no o2 rubbish, altho i did like it, it is pointless when it creates more harm than good. bluetooth will work better, but only for sending files and so on..... as it will upgrade to BT 3900. oh and wm10 which is an added bonus,
i have heard on the other hand that people have had problems with this rom, but so far, ive had it about 2-3 months now, and its never given me a problem!!!..so best to read wiki and browse the forums for 1.40 rom questions.
if you decide to upgrade to a better rom, and need help, just ask us on here and we will be happy to help.... or pm me and i sort you out.....
joey. 8)
Thanks for your offer joey. I will definitely send you a pm once i have read all that needs to be read. I will check out everything in detail.
I dont think any other phone compares to these customizable mofos. We rule.
I have found the O2 interface makes the IIs very unstable. There are threads that give details of how to remove it, but I have attached a text file giving the sequence. This does not need a hard reset at any stage, so you can keep all the software you have already loaded.
If you do at any time need to hard reset the O2 interface is automatically reloaded and so you will need to go through this process again.
missing attachment from last post
Give up here is the text instead!
O2 Active GUI removal
O2 seems to have been trying to make it more difficult to remove it this time, but once you get it cleared out the unit operates a lot faster.
1) Remove "connection.exe" in the "Windows/startup/ folder
2) Remove "xpdr_02" in the Windows/fonts/ folder
3) soft reset
4) Unistall "O2 Active UI"- note this will fail, but it gets rid of some items
5) Soft reset
6) Either from your PC, using ActiveSync or on the XDA IIs using file explorer, remove the entire "Mobile Solutions" folder from the windows/ folder.
7) Unistall "O2 Active UI" again - which again will fail, should this time advise program removed but again will indicate some items not removed
8) Remove the entire "ms" folder from the windows/ folder which should now be empty.
9) Soft reset
10) Check "remove programme" in settings to make sure that o2 active UI no longer appears in the list
11) Clear at last, well not quite. There is still a registry entry lurking that can be removed using "remover" or similar.
Okay so i ordered and received a Daxian T32 phone. This phone is great in all, no problems except for the wifi not working. It has it built in phone it has been disabled and only a wifi firmware update will enable it and whenever that will be out and i dont want to wait. Is there anyway to enable it? Tronicvasion were i got it from said that there might be a hack for it i guess. I was wondering do anyone have any info on this. Thanks.
thepindoctor said:
Okay so i ordered and received a Daxian T32 phone. This phone is great in all, no problems except for the wifi not working. It has it built in phone it has been disabled and only a wifi firmware update will enable it and whenever that will be out and i dont want to wait. Is there anyway to enable it? Tronicvasion were i got it from said that there might be a hack for it i guess. I was wondering do anyone have any info on this. Thanks.
Click to expand...
Click to collapse
I have heard that there is a hack for it, but haven't been able to find it anywhere. It's probably all over the Chinese forums...in Chinese....
daxian
hi folks!
i got an daxian x999 (which is the same as your t32) and i´m desperatly trying to dump the rom, because i want to modify or even replace it!
if u got to know somethings about hacks or tweaks, please tell me about it!
if someone can tweak it, maybe he even can dump the rom
thanx in advance
chuckbert
p.s.
to have wifi in my phone would be quite cool, too
Hello,
i have the x999+ with working wifi.
If it would be possible to read out my rom. could this be helpfull for you?
michael
rom!
sure it would be helpful... if it would be possible!
i´m trying to do this for a couple of days and i desperately need help from some kind of "rom-god"
so all u "rom-gods" reading this: gimme a hand, please!!!
I do have the 8 Gig mini sd card update for it, but nothing for the wifi yet. I dont even know how to get into the rom to enable it. As for the GPS chip it is over in europe from what i heard.
update
@thepindoctor
what kind of update is it?
just a .cab or something to flash the device?
It is just a cab file for the 8 gig memory card to work and i sure the wifi update will be the same way. I am having so much trouble with this phone rebooting at times and even hard resetting at times, im so glad i kept my wing, gave that to my wife but now im taking it back.
wifi
where did you get the information about the possible wifi-upgrade from?
i´m still very interested in it...
p.s.
i never experienced these kind of problems, though i keep playing around with my daxian to get the bootloader out! kinda strange...
T32 8 gig cab
thepindoctor said:
It is just a cab file for the 8 gig memory card to work and i sure the wifi update will be the same way. I am having so much trouble with this phone rebooting at times and even hard resetting at times, im so glad i kept my wing, gave that to my wife but now im taking it back.
Click to expand...
Click to collapse
Hi,
Were I can find this 8 gig card cab? In my device with wifi has just up to 2 gig.
Thank you in advance!
BR
SDHC update and WIFI
To enable SDHC, you can just look for it on the forum, it is on here several times...
Am not sure, but don't think that there will be an "update" for wifi...
The daxian x999/t32 doesn't have it, the daxian x999+/t32+ (which I have) does however...
So don't think you should get your hopes on for a "wifi update", if you would have a wifi antenna built-in, don't you think they would try to make it work from the beginning?
The + version has also been released a couple of months ago and if there would be such an update, I think they would've released it then.
is the sdhc hack a standard wm6 update for all phones? can't find a specific T32 one on here
I have the Wifi Hack App
Its a little dificult to do this:
1) get the pocket hack master (trial version)
http://store.handmark.com/p/910/Pocket_Hack_Master_for_Windows_Mobile_Pocket_PC
2) Shut off BLUETOOTH on 13%
3) Download http://www.freewarepocketpc.net/get-wmwifirouter-v0-89.html
WIFI router
4) on T32 (only T32) go to Settings - Connections - GPRS Stup, name it WIFI (on gprs internet)
5) save and restart t32. Run the wifi router and it will find your connection
And your using T32 wifi . thanks Rex909 the ghost hack master
i think i explained it right if i left something out let me know
That doesn't really make any sense. I've never been able to get Pocket Hackmaster to work with my T32. And how would one "shut off BLUETOOTH on 13%"??? And what would Hackmaster and the WiFi router have to do with each other?
any answer to the sdhc update whereabouts?
shambolic said:
any answer to the sdhc update whereabouts?
Click to expand...
Click to collapse
the cab that i use is SDHC.777 and is working, do a search with this name
problem with my daxian x999
Hello my friends
I really need your help. My phone starts to fail during booting and also if boot has problem reading some applications.
I made a hard reset as were explained before, blue screen...
So far so good, but still the some problem, I looks like some files are missing, shortcut invalid and my documents some times stay some no.
I am newbie with this but I think there is a problem with the rom.
thanks.
Have you used WMStorage 1.8, SPB MobileShell2.x or the TomTom Navigator with the phone before?
Until now i have found 4 cases of that behavior with the T32+ (including mine and yours)
I want to know what caused the malfunction. My phone is on the way back to me from china where it was repaired and i dont want it to break down again - so if you have any suspision please share it with me.
Other Software i used:
S2U2, S2P, S2V, and many more...
Draque:the_Plaque said:
Have you used WMStorage 1.8, SPB MobileShell2.x or the TomTom Navigator with the phone before?
Until now i have found 4 cases of that behavior with the T32+ (including mine and yours)
I want to know what caused the malfunction. My phone is on the way back to me from china where it was repaired and i dont want it to break down again - so if you have any suspision please share it with me.
Other Software i used:
S2U2, S2P, S2V, and many more...
Click to expand...
Click to collapse
****, YES !!! S2U2 and S2V,
Tomorrow, I'll send to china. Now the phone doesn't boot. Only shows windows mobile screen (blue). Nothing more
It's good to know which soft we have to avoid.
I didn't use WMStorage 1.8, SPB MobileShell2.x or the TomTom Navigator.
Only used S2UD and S2V.
Thanks for your info and share it!
personally i dont really think that s2u2 is responsible but maybe...
On the other Hand i had the following sw installed:
OmapClock - which failed at 204 MHZ
ActiveGCSync - a Google Calender Sync Application
GooSync - also a Google Calender Sync App
opera_wm5_ppc_865 - Browser
osmtracker
PCMKeyboard
Pointui 1.51a
SetVolume
SkypeForPocketPc
many GPS and Geocaching Apps
i also deleted the launcher startup link and the TouchFlo3D App.
btw: did s2u3 always behave right when you rotated the screen?
Good luck for your phone
I just purchased this phone and after extensive searching was unable to find any information regarding modifying the ROM.
This Quad Band Phone has the following features;
2.8" touchscreen
TI OMAP 1030 (ARM926T)
128 Rom 64 RAM
WM6.0
GPS
WiFi
Bluetooth 2.0
GPRS Edge
2Mp Camera
Microsim slot that supports up to 4GB T flash Card
I was wondering if there were some generic modding tools / instructions to extract and modify the ROM.
I primarily want to do this because the WM6.0 OS does not seem to be complete. e.g. the HKLM/Software/OEM/PhoneSetting key is not there and when added with the key ShowTimeZonePage there is no change. (this was done manually and with the HTC Registry wizard
I would also like to trim down unneeded programs to maximize the storage space and perhaps add the TF2D to the ROM.
TF2D installed perfectly on this device however takes the majority of my RAM limiting what I can install in there.
I read somewhere that this was an HTC Diamond Clone. While I do see the simular design I doubt the hardware is the same. Even still I have to ask. would the HTC software and ROM's work with this Phone?
One last question. Would it be possible to upgrade the OS to WM 6.1 using an existing ROM Image? I doubt it but had to ask. I am sure that I will have to dump the ROM from the phone and use that image to edit.
Please let me know your thoughts. Good or bad.
I hope to be able to modify this phone and if not that is ok because it is still a good phone as is. I was just hoping to get more out of it.
i have the same phone
hey, i have the same phone ... did you found anything about modding it ?
I was able to dump the ROM however since part of it is SRPK encoded I was unable to do anything with it.
I Have a more detailed thread on what I was able to accomplish going here
http://forum.xda-developers.com/showthread.php?t=455233
If you get any farther please share.
I Found the Rom for WM6.1
Hey, i found the rom for WM6.1 its an img file, but, i dont know how to procede, tell me how to send you, to test.
upload the file to this site
http://uploaded.to/
and post the link here
Are you sure this is for the hTY Q5? Where did you find it?
Rom
http://uploaded.to/?id=6u3czv
is from the Development team of the phone, is a "test" rom
matagatoz said:
http://uploaded.to/?id=6u3czv
is from the Development team of the phone, is a "test" rom
Click to expand...
Click to collapse
Hi!
Just reading through the forum here. ggeisler, any luck with that WM6.1 ROM?
HTY/Hantel Q5 - TouchFlo 3d (manilla)
Does anyone know if the new TouchFlo 3D Manilla (as seeon on the HTC Touch Diamond) works on tihs phone? and if so, any particular place I can I can find it to install it on the Hantel Q5 WM6?
Can someone tell me more about this device and it's InfraRed port
I want to know is this the CIR infrared port, so that u can use the device also as a remote controller for your television at about 2 meters distance?
Can someone please try this, I want to know this fact before buying one...
Can you recommend this phone for buying?
Thnx
Jaromirtje said:
Can someone tell me more about this device and it's InfraRed port
I want to know is this the CIR infrared port, so that u can use the device also as a remote controller for your television at about 2 meters distance?
Can someone please try this, I want to know this fact before buying one...
Can you recommend this phone for buying?
Thnx
Click to expand...
Click to collapse
Your best bet is to pose the question to the vendor on this one. Atleast you'll know for sure, otherwise be refunded if any information on the device that is inaccurate after purchase. Hail to eBay and PayPal protection! Seriously though, if the decision to buy this phone is based on a condition of using it for a remote control for your TV, you're best off not buying this device. Anyhow, I`m still waiting for my order of this device to arrive. I`ll test and let you know, but from the specs I read, it didn`t note a CIR infrared port. Anyone?
There is no infrared on this phone that I am aware of. Perhaps other model variants have one.
I have not had a chance to play with the ROM yet but as soon as I have a chance I will try to load it and post back here with the results.
Hantel007 said:
Does anyone know if the new TouchFlo 3D Manilla (as seeon on the HTC Touch Diamond) works on tihs phone? and if so, any particular place I can I can find it to install it on the Hantel Q5 WM6?
Click to expand...
Click to collapse
yes it works but I have only been able to get UPDATE 19 to work and it was verry slow. (ultimately had to remove it) you can install everything into memory fine but you will have very little space left on the device. If you install anything on the SD Card it will be to slow to use.
get it from here
http://forum.xda-developers.com/showthread.php?t=398173
Can someone already confirm if the hty q5 has cir or not....
the respones i got from ebay sellers:
*bestplace4you says it has no infrared at all, de factory is still developing it...
*www.tomtop.com says it is the short range infrared that has to be aimed directly
*light_wholesale says it is with the strong infrared signal (cir)
so still no view on this....
can someone bring the light to this topic...
Jaromirtje said:
Can someone already confirm if the hty q5 has cir or not....
the respones i got from ebay sellers:
*bestplace4you says it has no infrared at all, de factory is still developing it...
*www.tomtop.com says it is the short range infrared that has to be aimed directly
*light_wholesale says it is with the strong infrared signal (cir)
so still no view on this....
can someone bring the light to this topic...
Click to expand...
Click to collapse
NO IR at all
I have the device in my hand, nothing on it looks like it has an ir emitter.
I am sure tomtop is confusing this Q5 with another phone
this one has;
GPS
Bluetooth
Quadband (some models have triband so be careful you may need 850Mhz in some locations)
Edge
2MP Camera
WiFi
WM6 (hopefully upgradable to 6.1 still trying)
TF Card slot capable of up to 4GB (tried 8GB and only read 4)
But still no ir port.
Windows mobile has settings for ir but the hardware just is not there.
so one more time, I can confirm that there is no ir on this phone!
Tha last phone I had with ir sucked using as a remote. I ended up replacing the ir emmiter because the one that was in it was just to weak. the new emmiter worked better however the wavelengths transmitted via ir are not used by all remote controls.
If you want a remote go buy a remote. Using you phone is not the best option.
hey, mine has a 8gb microsd ... and it reads it all
ggeisler said:
yes it works but I have only been able to get UPDATE 19 to work and it was verry slow. (ultimately had to remove it) you can install everything into memory fine but you will have very little space left on the device. If you install anything on the SD Card it will be to slow to use.
get it from here
http://forum.xda-developers.com/showthread.php?t=398173
Click to expand...
Click to collapse
Ahh, Sorry to hear about the perfomance, was really looking forward to getting the interface on this device with smooth operation. One thing to note though, and this is something that I inquired about with the Windows ROM versions, is that my device came installed with Windows Mobile 6.1. I wonder if that would make a difference at all. Anyway, No big deal really. Right now my challenge is to get the GPS working. Keep getting the "No Valid GPS signal" etc.. and I've tried it everywhere.. suggestions? (sigh) Anyway, Thanks for providing me the link for U19, I'll give it a go and see what happens.
This message simply means that is has not locked onto a GPS Satellite signal yet. My phone has taken as long as 10 min to lock on (when indoors). It is significantly faster when outdoors.
FYI
COM: 5
Baud: 4800
(If using TomTom choose "Other NMEA GPS reciever")
If your phone came with WM6.1 would it be possible for you to dump an image of it for all of us with 6.0?
I have been trying to get the Image provided by matagatoz with no success.
I believe that na external program was used to first update the bootloader before updating the ROM. since I nether have this program or the updated bootloader all my attempts to upload this image have failed.
I have even attempted a SD card install but have not found an appropriate combination of file name of image, or key press combo for updating
I found that holding down Power and the End Call button resets device to factory defaults. Holding the end call and pressing the reset does the same thing. I have not found any other key press combination's that do anything else.
Update
Did you try to reboot it using Power + circle button, or turning it on with that combination... is supposed to load teh image file into rom from SD card with that
matagatoz said:
Did you try to reboot it using Power + circle button, or turning it on with that combination... is supposed to load teh image file into rom from SD card with that
Click to expand...
Click to collapse
Any clue as to what to name the image?
I have tried your key combo (reset while pressing circle) and the device shuts off and is unresponsive (nothing on screen) until it is reset again (will not power back on)
I think we may be on to something I think we just need the correct file name.
Currently I have tried;
HTC.nbh
HTY.nbh
ELFIMG.nbh
ELF0IMG.nbh
UPLOADER.IMG
Flash Procedure ( images on DOC inside ROM download RAR )
Xuzhou 999ppc smart phone network
3.13 before the escalation of the original guidelines
Web site: www.999ppc.com
Entities shop Address: Xuzhou Huaihai Road Hongqiao 137 million electronic market on the second floor A2-53
Tel :0516-82580216 Mobile: 13914898099 (晁生), 13092311039 (single Health) QQ: 49360705,65872551 QQ exchange group HTY group: 57,841,094
Taobao shop: http://shop36275237.taobao.com/
First, before the 3.13 version 6.1 upgrade steps:
Note: upgrading the necessary equipment (computers, USB line, leave the battery fixture), veneer, upgraded machine can be used tweezers to connect TP3, TP17 trigger. As a result of individual trigger abnormal escalation after using fake battery upgrade.
1. Intercalation USB line to install drivers. (Installed after the pull-out USB line)
2.2. Open decompression after the upgrade software,
3. Click on the upgrade software, upgrade function keys.
4. Connect USB cable, shorted PCBA contact.
5. Upgrade to connect the success of the upgrade started.
6. The upgrade is complete
Second, after the 3.13 version of Brush Tutorial:
1, to prepare a capacity of less than 1G cards tf.
2, will be available compression package (uploader.img) copied to the card's root directory
3, to ensure that your battery not too little, at least above 50%
4, will be shut down mobile phone and the battery is removed, place will be mounted on a mobile phone
5, copy files to the TF card into the phone TF bed
6, at the same time hold down the "power button + the middle of a round navigation button" after a few seconds the screen "update"
7,几十秒, the phone will automatically re-starting, so Q5 your success on the Brush
Hello there,
What I Have: Att 8525 Herm100
Rom: Att's Mobile 6
Everything is stock but the extended life battery
The problem I am having is when ever I try to activate my WiFi the phone doesn't do anything. I am not sure if there is a wifi card or not but that's want I want to know. I have tried everything from activating it in com manager to going into the settings and activating it manually and nothing happens it acts like I didn't even hit the button to activate it. Is there a wifi card in the phone or is it integrated on the motherboard in the phone. Note: I bought this phone off e-bay and the wifi never worked when I received the phone.
I am new here and if there is a post about this already I am sorry.
I hate it when that happens.
To begin, there were two ATT OEM WM6 roms relevant to the 8525 that I noticed deep in the bowels of XGA.
I chose the later file (higher revision numbers) I found it here:
http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
From comm manager when I click the tower button on within a second the spinning windoze icon shows something is happening. It then starts "sniffing" for my preset wifi connection (ATT supplied 2wire portal 802.11g).
Now, if yours does not show the spinning windoze working icon when you turn on wifi? There obviously is a problem. This could be software, or hardware related (duh). If there is no error message related to "wifi is not an option, unavailable, or screwed" then my first guess is there is something missing or damaged in the ROM update that was applied to your device. As far as I know all 8525 (herm100) were shipped with wm5. It had been mentioned in the volumes of xda that the first AT&T WM6 rom was a little buggy. Try the later released AT&T WM6 update.
It was a run file so no muss no fuss. Sync the phone run the update from the pc, three minutes later the phone is flashed to ATT WM6 professional.
You could take it to a ATT shop? But, I think that without a doubt they would hand it back and say you need a new phone with a 20 year contract and 3g data plan even Obama would blush at.
Try the hard reset. take a picture of the startup screens so you have the numbers and see if the wifi startup is working after the reset. If not then compare the numbers to the above mentioned roms. If the indications are you have the first issue of WM6 from ATT try flashing the second release. If that still fails then your device could indeed have a hardware problem.
The wifi is indeed built into the system and if that chip on the board is not working it could be a overly expensive problem. Possibly a shop has a working board they would swap out cheap? Otherwise, it is a fun phone you can keep notes on, run gps software if you have a bluetooth gps receiver and software like tomtom.
To be honest the wifi on my 8525 has been convenient when around the house to check the local weather radar when I hear a thunder outside, or browse headlines from the porcelain room or even leave messenger turned on incase a gamer friend is looking for someone to get shot up in a game.
I have used the live search voice thing to amaze the neighbors once. But, the limited range of wifi is a real drawback to how truly wonderful that addition could be.
HELP Please! Wi-Fi not working!!!
Hi to XDA all users !!!
MY Hermes - HTC TyTN [Herm200]
I bought HTC Hermes myself year ago.
there was flashed a WM5.0, I've just downloaded from here HARD SPL & WM6,1 (Custom) Flashed.
Wi-Fi will works on WM5.0.
Well here I am at 6.1 flashed and now is not working Wi-Fi. When i pressed Power ON - loading long and nothing happens.
Other methods are also tried on Commanager and Settings - but did not help.
What do I need to do my dear.
HELP!
Thank you for your attention!
Hi Nurk.
Since the wifi worked on wm5 but failed after the 6.1 flash. I would guess the problem is in the 6.1 components. You might start with contacting the kitchen rom you employed for WM6.1 thread and see if this has happened to others. Next step would be to check the radio rom version. I did see on xda an assortment of Radio roms.
If your not totally in love with the current rom you have flashed? Try another 6.1 or even a 6.5 and see whats poppin.
and what you have in HKLM\Software\HTC\CommManager\WLAN\DeviceName?
utak3r said:
and what you have in HKLM\Software\HTC\CommManager\WLAN\DeviceName?
Click to expand...
Click to collapse
I have get this from registry:
HKLM\Software\HTC\CommManager\WLAN\DeviceName - {98C5250D-C29A-4985-AE5F-AFE5367E5006}\TIACXWLN1
Hi guys,
I saw a several post for the problem with the WiFi which dont want to connect after phone waked from standby
in my case - WM6.5 WWE Official Rom
how I solved this
[HKEY_LOCAL_MACHINE\Comm\BCMSDDHD1\Parms]
string Value - "EnableAutoConnect" must be set to 1
this work for me.
At first when you powerd from StandBy you will see that the WiFi icon still missing, but when you open the browser or Im .. or whatever using internet
WiFI Start to connecting
Thats from me
I Hope that this will work and for you guys
Regards,
patzkata
Thanks! Hope this works.
Is there any way to have it connected w/out editting the reg? Also, what program is best for doing so?
Ky772 said:
Thanks! Hope this works.
Is there any way to have it connected w/out editting the reg? Also, what program is best for doing so?
Click to expand...
Click to collapse
I don't know
did you tried it already?
it seem that this is some king of bug in WM6.5, and after the phone sleep (stanby mode) after that the WiFi is ON, but it dont want to connect
so if you chance the registri like i said, you will have no problems any more
Regards,
patzkata
The Registry Settings dont exist on my device. im running 6.5.3
Trying this - hope it works.
On do this.
[HKEY_LOCAL_MACHINE\Comm\BCMSDDHD1\Parms]
string Value - "HTCKeepWifiOnWhenUnattended" must be set to 1
drewcam888 said:
On do this.
[HKEY_LOCAL_MACHINE\Comm\BCMSDDHD1\Parms]
string Value - "HTCKeepWifiOnWhenUnattended" must be set to 1
Click to expand...
Click to collapse
that worked for me. Thanks
the EnableAutoConnect edit worked for me, but the HTCKeepWifiOnWhenUnattended did not hold after a restart. It would be nice if i could get my wifi to stay on. Any ideas?
BTW I got an HTC Tilt 2 with original rom WM6.5 rom ver 1.59.502.3 WWE
LiquidXed what i use and has worked with no problems so far to Keep Wifi enabled and on always ( even through standby) is Wifinostandby
http://forum.xda-developers.com/showthread.php?p=5353195
just install it and it will basically do what the Tweaks do (BBtweaks etc) but it does it auto on startup every time since the registry keys don't hold after restarts.