Develop Bugs

Telus S2 X Screen lock

Hi,
I have a telus galaxy SII X and my kids play on it and changed the screen password. I am not able to get in, I have tried to use ODIN and re-flash the default telus ROM SGH-T989D_TLS_T989DTLKJ3, but it always comes up with the screen password.
Is there a way to completely wipe it as I am not able to get into the phone. Any suggestions how I could bypass the password and if not I am willing to competely wipe/reset it to factory default.

You may want to get into recovery mode and wipe the device.

Mrx2011 said:
Hi,
I have a telus galaxy SII X and my kids play on it and changed the screen password. I am not able to get in, I have tried to use ODIN and re-flash the default telus ROM SGH-T989D_TLS_T989DTLKJ3, but it always comes up with the screen password.
Is there a way to completely wipe it as I am not able to get into the phone. Any suggestions how I could bypass the password and if not I am willing to competely wipe/reset it to factory default.
Click to expand...
Click to collapse
I'm a bit baffled because ODIN completely re-writes all of the firmware and software. There should be no way that it persists through ODIN. Now, the only suggestion I can offer would be to wipe your SD-card, do a factory data reset in CWM and then ODIN again. If that doesn't work then there is something seriously screwed up because that will mean that you have wiped literally all the memory on the phone.

Thanks, I will give your suggestion a try and will post back the result.

Flash original odin, then update odin...
ツ

any results?

This board would be so much better if people would post results after attempting to fix their devices.
Sent from my Hercules using XDA App

Pretty sure this dude stole this phone.
His kids changed the passcode, really?

First of all I appologise for the delay in responding.
I find it insulting that someone would say i stole the phone without any cause. I had grave shift work and did not get round to trying out the suggested fixes.
No it does not work for me. I am new to this, I have been using ODIN3 v1.85 and it sees the phone no problem, i use the PDA option to push the reovery.tar, which successfully does it stuff and reboots the phone and takes me back to the login screen. After this I do not know what to do, I press the power and volume down button and it takes me to the download ODIN screen again, but i do not see any options to install rom.
I read somewhere that after flashing the recovery.tar, I need to flash the clockworkmod.tar to get the option to install rom. This is the part that does not work for me, if I use ODIN3 v1.85 to flash the phone gives me firmware mismatch error, connect to Kies to recover firmware. I have to flash the recovery.tar to get rid of the firmware error message.
I also tried to use another ODIN multi downloader v4.28, but this one does not even see the phone.
madteam.co/2011/10/06/how-to-use-clockworkmodecwm-recovery-manager-a-complete-guide/
So I am still stuck. Forgive me if I am missing the obvious as i am new to all this.

Mrx2011 said:
First of all I appologise for the delay in responding.
I find it insulting that someone would say i stole the phone without any cause. I had grave shift work and did not get round to trying out the suggested fixes.
No it does not work for me. I am new to this, I have been using ODIN3 v1.85 and it sees the phone no problem, i use the PDA option to push the reovery.tar, which successfully does it stuff and reboots the phone and takes me back to the login screen. After this I do not know what to do, I press the power and volume down button and it takes me to the download ODIN screen again, but i do not see any options to install rom.
I read somewhere that after flashing the recovery.tar, I need to flash the clockworkmod.tar to get the option to install rom. This is the part that does not work for me, if I use ODIN3 v1.85 to flash the phone gives me firmware mismatch error, connect to Kies to recover firmware. I have to flash the recovery.tar to get rid of the firmware error message.
I also tried to use another ODIN multi downloader v4.28, but this one does not even see the phone.
madteam.co/2011/10/06/how-to-use-clockworkmodecwm-recovery-manager-a-complete-guide/
So I am still stuck. Forgive me if I am missing the obvious as i am new to all this.
Click to expand...
Click to collapse
Hi. Use my guide to flash the stock telus rom which is listed in my thread. Don't worry about the rooting part. Just follow the part where it shows you how to flash back the stock Telus rom with odin (Telus Goodies). PM me if you need help.
http://androidforums.com/galaxy-s2-...d-ultimate-root-optimization-guide-steps.html

I want to thank everyone who provided very useful help especially blue1k, the guide was awesome, really great for a new guy like me. I guess the whole problem was that I didn't know the difference between download and recovery mode. Most of the information on the net shows you how to get to download mode, but not how to get to recovery mode, especially the key combo needed to get there.
I finally got into recovery mode using the guide and reset/clean cache and then used ODIN to flash the telus ROM and it worked.
Once again, I would like to thank members of this forum, you guys are truly very talented; I had been very frustrated for over 3 weeks googling and just could not find clear cut instructions.
Again, sorry for posting so late, I know it can be frustrating giving advice but not getting any timely feedback or no feedback at all.
Blue1k, I just made a donation on your site as a token of thanks

Mrx2011 said:
I want to thank everyone who provided very useful help especially blue1k, the guide was awesome, really great for a new guy like me. I guess the whole problem was that I didn't know the difference between download and recovery mode. Most of the information on the net shows you how to get to download mode, but not how to get to recovery mode, especially the key combo needed to get there.
I finally got into recovery mode using the guide and reset/clean cache and then used ODIN to flash the telus ROM and it worked.
Once again, I would like to thank members of this forum, you guys are truly very talented; I had been very frustrated for over 3 weeks googling and just could not find clear cut instructions.
Again, sorry for posting so late, I know it can be frustrating giving advice but not getting any timely feedback or no feedback at all.
Blue1k, I just made a donation on your site as a token of thanks
Click to expand...
Click to collapse
Thanks man!

Blue1k said:
Hi. Use my guide to flash the stock telus rom which is listed in my thread. Don't worry about the rooting part. Just follow the part where it shows you how to flash back the stock Telus rom with odin (Telus Goodies). PM me if you need help.
http://androidforums.com/galaxy-s2-...d-ultimate-root-optimization-guide-steps.html
Click to expand...
Click to collapse
good to see members helping each other out +1 thanks for u

Doesn't it let you reset your password after to many attempts via inputting your email password?
Sent from my SGH-T989 using xda premium

br00x said:
Doesn't it let you reset your password after to many attempts via inputting your email password?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
That's what I thought too and I reset my password before that way.
Sent from my Nexus One using XDA App

I really appreciate the help from this forum members, I didn't know that you could reset the password via email, after multiple failed attempts, it would lock me out for serveral mins. Anyway, I had a very positive experience on this forum, and this method (ODIN) has given me the confidence to try out customised ROMs etc

Help with Odin/Download Mode

Okay so I got this phone today and I went straight to the mskip toolkit for the Note 2. I have the S3 toolkit as well.
The thing is when I try to root the phone Odin will come up but the first box under ID:COM does not turn blue or do anything at all.
When I first did this I had to download a preloader driver. It was MT65xx.
Okay so I got that but still no actual connection to Odin. So my other problem is that when I hold vol- home power it doesn't go to download mode, instead the android logo pops up but then falls over with a red exclamation mark warning sign with an open panel. Looks like a generic error message pop up. So I can't get past this. What do I do? I read that it may be an imitation phone if this doesn't work so is this the case?
This may not affect anything but when I first got it and rebooted the phone the Samsung logo booted as the animation, after I reset it it changed to the android word. I don't know if that means anything but this is the problem I am having.
Samsung Note II: GT-N7100
Ver. 4.1.1
Baseband Ver: MAUI.11AMD.W12.22.SP.V7.P3
Kernel: 3.0.13
1217 V41
Build: ALPS.ICS.MP.V1.3
Custom build version: 1366963977
Odin3 v3.07
That's as best info as I can give thanks in advance.

Okay well after digging I figured yeah it's a knock off. I'm pissed but whatever now it's time to roll with it.
My next issue is that I can't get to anything but the default recovery. I have tried flashing different imgs or attempting to but nothing.
I tried buying Mobile ODIN and it gave me the "Unexpected partition layout" message.
I also tried using fastboot but and tried the terminal emulator for the phone to flash the recovery that way and when I go into recovery it does as I explained before. Spins a little then falls over and goes into default recovery.
I rooted using Root with Restore by Bin4ry v18.
I'm still new to this and trying to figure out what else I can do. I downloaded rom mannager apk and it say the GTn7100 isn't supported. I'm not sure what else to do. If anyone can shed some insight.
I'm gonna keep the phone for now and I want to flash the alliance rom onto it if possible. Thanks again

Well you can close this thread mods. No one is going to help and that's fine. Found a solution to my problem. Getting a different phone.

kuruptnightmare said:
Well you can close this thread mods. No one is going to help and that's fine. Found a solution to my problem. Getting a different phone.
Click to expand...
Click to collapse
You need to have installed drivers from kies or samsung drivers to your pc in order for odin to recognise and communicate with your device. You also need to be a little patient I notice you only posted this thread yesterday and already your complaining.
GT N7105 with XDA Premium......that is all......

bearusa said:
You need to have installed drivers from kies or samsung drivers to your pc in order for odin to recognise and communicate with your device. You also need to be a little patient I notice you only posted this thread yesterday and already your complaining.
GT N7105 with XDA Premium......that is all......
Click to expand...
Click to collapse
Sorry if I seem impatient or as a complainer. I'm usually calmer. Anyway I had already performed said steps to no avail. I had already been up all night trying different methods to no help. I already got a new phone from T-Mobile today. Maybe I made the right choice or maybe not. It's alright. I'm satisfied in the end.
Thanks for your attempt though. Appreciated.

[Q] Galaxy Note 2 i317 Won’t Boot After Update

Issue
1. Phone won’t boot beyond the Samsung Logo.
2. It won’t boot into recovery (download mode works).
3. Can flash rom using Odin but phone still won't boot.
Type of Phone
Type: AT&T Samsung Galaxy Note 2
Model: i317
Ownership: Bought in Nov 2012 brand new. Warranty is up but it is insured through AT&T.
History: Rooted and then un-rooted and returned to stock in January 2014.
Actions leading up to Issue
Updated to Samsung’s newest firmware Android 4.3 but didn’t like it. I rooted my phone and tried a custom rom but wasn’t happy. Un-rooted by flashing original stock rom via Odin 3.07. Worked great and I was back in business. But then the phone went through an update and never booted back up.
Detail
I’ve rooted all my other phones but never felt the need to root this one until I updated to Samsung’s new Android 4.3. I wasn’t happy with the decreased battery life and poor performance. So I used the method at http://forum.xda-developers.com/showthread.php?t=2004650 to root my phone using “root66_ATT_I317UCALJ2.tar.md5” with Odin 3.07 and it worked. I then tried a custom Cyanogen Mod rom but it still left something to be desired.
After more research I flashed the original stock rom “KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user_low_ship.tar.md5” via Odin 3.07 and my phone worked beautifully, at least for a day. Then I started getting the AT&T update window for Android 4.3 and the only way to get rid of it was to pull my battery. It was happening so much that I couldn’t even make a phone call. Out of pure frustration I decided to accept the update.
After the update installed it rebooted and never made it past the Samsung logo. So I figured I would just go into recovery and perform a factory reset as well as wipe the cache. The problem here is that it won’t boot into recovery. Only download mode works. I’m also seeing a red LED which I’ve read is a sign of SDS.
I’ve tried re-flashing the original stock rom again. Every time I do I get the green “Pass” display but my phone still won’t boot. The binary count is now at 21 since I’ve tried flashing so many times. I’ve been working on this and researching for 3 weeks. I’ve never had an issue that I couldn’t resolve when it comes to any of my past phones but this is beyond my skill or understanding. I also tried Samsung keys but it says my device is not supported.
Short of digging a hole in my back yard and burying it, is there anything I can do to fix this?
(Note) My wife has the same phone and also didn’t like the update so I flashed the same original stock rom to her phone via Odin and it has been working just fine. Only difference is I never rooted hers. I should have gone that route with mine.

Have you tried flashing, via Odin, just a custom recovery?
If that works, you may be able to follow this guide, starting at post #2.
http://forum.xda-developers.com/showthread.php?t=2618447
If that doesn't work, it is possible you have an emmc issue.... Your symptoms are similar to what others have reported here recently. You might be able to get a repair covered if you can get them to look past the custom counter ... You are running stock firmware... Maybe kies tripped the counter... Stranger things have happened...
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

Zen Arcade said:
Have you tried flashing, via Odin, just a custom recovery?
If that works, you may be able to follow this guide, starting at post #2.
http://forum.xda-developers.com/showthread.php?t=2618447
If that doesn't work, it is possible you have an emmc issue.... Your symptoms are similar to what others have reported here recently. You might be able to get a repair covered if you can get them to look past the custom counter ... You are running stock firmware... Maybe kies tripped the counter... Stranger things have happened...
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks I'll give it a try. I had thought about it but was afraid to mess things up even more. Is there one that you would recommend?

josh3josh3 said:
Thanks I'll give it a try. I had thought about it but was afraid to mess things up even more. Is there one that you would recommend?
Click to expand...
Click to collapse
Here's the link to TWRP (you want the Odin link toward the bottom):
http://teamw.in/project/twrp2/124
Here's the direct link to the latest philz cwm (you want the md5 file):
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/t0lteatt
I prefer philz, but you will likely need TWRP to follow the dicksteele guide. You should also track down a CWM flashable recovery package for MH3 recovery to flash back should you need to return the phone for repairs. You can get this by following the i317 link in my sig.
If flashing this in Odin doesn't work that would tend to support the emmc fail scenario. (i.e. you flash it, Odin behaves as if it flashed ok, you power off, attempt to boot recovery with home-VolUp-power and it still doesn't boot). If it does boot recovery, you can try the guide as I mentioned before. Good luck!

Zen Arcade said:
Have you tried flashing, via Odin, just a custom recovery?
If that works, you may be able to follow this guide, starting at post #2.
http://forum.xda-developers.com/showthread.php?t=2618447
If that doesn't work, it is possible you have an emmc issue.... Your symptoms are similar to what others have reported here recently. You might be able to get a repair covered if you can get them to look past the custom counter ... You are running stock firmware... Maybe kies tripped the counter... Stranger things have happened...
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I tried each of those just now and they both flashed fine however there is no change. I guess before I break out the shovel I'll try to see if AT&T will fix it since I do pay for the insurance. Thanks for the help that was good stuff. I wish it could have worked.

josh3josh3 said:
I tried each of those just now and they both flashed fine however there is no change. I guess before I break out the shovel I'll try to see if AT&T will fix it since I do pay for the insurance. Thanks for the help that was good stuff. I wish it could have worked.
Click to expand...
Click to collapse
if you have nothing else to lose, can you try flashing the boot loader on this link
http://d-h.st/Krs from this thread
http://forum.xda-developers.com/showthread.php?t=2589891
then try one of the official odin package or this:http://d-h.st/DGZ

So, there appear to be many people who see this update as a bad joke. Like me.
I had a thread a couple days ago about how to kill the notification from att
Without root. Nothing can be done as far as ive heard/seen. Im a bit confused
About needing a battery pull to remove pp note, I have been just reboot and it
Goes away until next data use/net access. When my 8 hrs is up I turn data on
(Data off as 8hrs expires) and immediately get note and then I hit home- get
another 8 hrs. Im sorry to hear they wore you down with the note- im going to
fight and resist for the duration. And keep stock. Its a game now!
R, john

qkster said:
if you have nothing else to lose, can you try flashing the boot loader on this link
http://d-h.st/Krs from this thread
http://forum.xda-developers.com/showthread.php?t=2589891
then try one of the official odin package or this:http://d-h.st/DGZ
Click to expand...
Click to collapse
Tried it and it failed to flash. Now I have the yellow triangle. At least its something different. Still no good though. Reflashed stock rom and I'm back to the Samsung logo. Was worth a shot. Thanks.

Try param and tz package mentioned in post #3 here.... Might be something
http://forum.xda-developers.com/showthread.php?t=2596256
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

josh3josh3 said:
Tried it and it failed to flash. Now I have the yellow triangle. At least its something different. Still no good though. Reflashed stock rom and I'm back to the Samsung logo. Was worth a shot. Thanks.
Click to expand...
Click to collapse
You flashed LJ2 Stock ROM from ODIN?
And you are back to the Samsung Logo that flashing/pulsing blue???
If so .....
Pull the battery and let the phone sit for a few seconds, pop the battery in and boot into stock recovery (HOLD VOL UP+HOME+POWER) and do a FACTORY RESET then reboot.
I had to do the same thing an hour ago....

dicksteele said:
You flashed LJ2 Stock ROM from ODIN?
And you are back to the Samsung Logo that flashing/pulsing blue???
If so .....
Pull the battery and let the phone sit for a few seconds, pop the battery in and boot into stock recovery (HOLD VOL UP+HOME+POWER) and do a FACTORY RESET then reboot.
I had to do the same thing an hour ago....
Click to expand...
Click to collapse
Have tried that many times with no luck. Wish it were that simple.

josh3josh3 said:
Have tried that many times with no luck. Wish it were that simple.
Click to expand...
Click to collapse
Have you tried this yet ?
http://forum.xda-developers.com/showpost.php?p=49826416&postcount=9

Zen Arcade said:
Try param and tz package mentioned in post #3 here.... Might be something
http://forum.xda-developers.com/showthread.php?t=2596256
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I can't believed it worked. Flashed this and suddenly I have recovery. Then I re-flashed the original stock rom, did a reset and wiped the cache and I'm back up and running. Brilliant I say. Genius! Thank you for the great post and thanks everyone for your help. Seems like there should be a like button or something so that you get credit but I don't see one. This was my first time ever posting on any forum so I'm a little ignorant.

josh3josh3 said:
I can't believed it worked. Flashed this and suddenly I have recovery. Then I re-flashed the original stock rom, did a reset and wiped the cache and I'm back up and running. Brilliant I say. Genius! Thank you for the great post and thanks everyone for your help. Seems like there should be a like button or something so that you get credit but I don't see one. This was my first time ever posting on any forum so I'm a little ignorant.
Click to expand...
Click to collapse
That would be the Thanks button by the Quote...
OUTSTANDING !!!
Glad you're back among the living.
This will get you back to 4.1.2
http://forum.xda-developers.com/showpost.php?p=49616718&postcount=2
EDIT:
I just did this and it worked perfectly .....
I'm actually doing that step right now also. I flashed back to stock testing the ATT update server.
EDIT #2:
At this step when the phone reboots the script will run. When it completes you want to boot to system. The next prompt will be do you want to install ROOT. If you do the swipe it will install ROOT, there is a DO NOT INSTALL button on the middle of the screen. Just a heads up, don't know if you are turning your phone back in or not now.
- Second step is:
You will need to download TWRP 2.6.3.1 and flash it in ODIN.
http://goo.im/devs/OpenRecovery/t0lt...lteatt.img.tar
This is necessary for an openrecovery script to run that is stored in the /cache directory from the update.
- Put your Note 2 in Download Mode.
- Open ODIN, put openrecovery-twrp-2.6.3.1-t0lteatt.img.tar in PDA slot. Click Start and let the phone reset.
- Your phone will reboot in TWRP. If not, pull battery and enter recovery mode boot into TWRP recovery (HOLD VOL UP+HOME+POWER). The script will run by itself.

sgh-i317 EFS seems like its gone
could anybody help me out with my note 2. ive tried just about everything i can think of. im getting pretty desperate. i can get everything to work fine (recovery,download mode,) but something is keeping it from booting up to the main screen, it will just hand at the boot animation, or the att logo. in twrp it tells me failed to mount efs. ive looked around in the file folders and its like it got wiped out? im not sure how though. could that be why its not booting up?
any ideas??

[Q] no service after root, trying to get my regular phone bacl

I'm pretty sure I made a rookie mistake and I'm facing the conscience. Last night I was need of rooting my phone (at&t galaxy note II i317) using Kongo Android to get superUS and everything was going fine, I still had all my stuff, service and everything, so I decided to add a custom ROM (cm-10.1.3-tOlteatt), wiped everything and I ended up in a bad situation, I forgot to back up my phone so I lost all of my contacts, lost my service provider so I have no signal, and can't download any apps because I don't have play store. . . If anyone knows to way to help solve this PLEASE HELP ME. . . all I want to do now is find a way to uninstall all this rooted stuff and go back to my regular functioning galaxy s note II
THANK YOU FOR THE HELP IN ADVANCE

Check here for help:thumbup::
http://forum.xda-developers.com/showthread.php?p=49616709
You can also look here:
http://forum.xda-developers.com/showthread.php?p=41340941
And you should have used this for your rooting needs...
http://forum.xda-developers.com/showthread.php?p=33854391
And from the sounds of it, you downloaded the wrong Rom for your phone! And it's always bad skiing stuff late when we're tired. That's when we run into problems. It's called late night flashing
Sent from my SAMSUNG-SGH-I317 using Tapatalk

ViiRuZ said:
I'm pretty sure I made a rookie mistake and I'm facing the conscience. Last night I was need of rooting my phone (at&t galaxy note II i317) using Kongo Android to get superUS and everything was going fine, I still had all my stuff, service and everything, so I decided to add a custom ROM (cm-10.1.3-tOlteatt), wiped everything and I ended up in a bad situation, I forgot to back up my phone so I lost all of my contacts, lost my service provider so I have no signal, and can't download any apps because I don't have play store. . . If anyone knows to way to help solve this PLEASE HELP ME. . . all I want to do now is find a way to uninstall all this rooted stuff and go back to my regular functioning galaxy s note II
THANK YOU FOR THE HELP IN ADVANCE
Click to expand...
Click to collapse
Let's turn the frown upside down..... How's it going ??

Bajanman said:
Check here for help:thumbup::
http://forum.xda-developers.com/showthread.php?p=49616709
You can also look here:
http://forum.xda-developers.com/showthread.php?p=41340941
And you should have used this for your rooting needs...
http://forum.xda-developers.com/showthread.php?p=33854391
And from the sounds of it, you downloaded the wrong Rom for your phone! And it's always bad skiing stuff late when we're tired. That's when we run into problems. It's called late night flashing
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Thanks for the recommendation but I've previously tried the method, but my phone always failed to download (even when it wasnt rooted) would u have any other way of solving it without having to use odin. . . my phone is currently stuck in recovery mode so any help trying to get out of it would be helpful. .thank you for your time helping me solve my issue

Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.

ViiRuZ said:
Thanks for the recommendation but I've previously tried the method, but my phone always failed to download (even when it wasnt rooted) would u have any other way of solving it without having to use odin. . . my phone is currently stuck in recovery mode so any help trying to get out of it would be helpful. .thank you for your time helping me solve my issue
Click to expand...
Click to collapse
Ranger is correct, try doing what he suggested.
But not really understanding what you have tried from your post.....
Which method, and what does fail to download?
Do you mean fail to get into download mode, and you only can get into recovery?
Are you doing this to get to download mode?
Put your Note 2 in Download Mode
-First you will need to turn off your device.
-Once it’s off, you need to press this button combination: volume down, power button and home button.
-Keep them pressed until the download mode shows up.
-Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Obviously you want to press the volume up. Now you are ready to ODIN flash.

rangercaptain said:
Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.
Click to expand...
Click to collapse
i will be sure to try this method whenever i get my hands on an SD card adaptor. What ROM would be best to download for the correct at&t APN settings? i would look but my past luck has been failure.
Thank you for your help

dicksteele said:
Ranger is correct, try doing what he suggested.
But not really understanding what you have tried from your post.....
Which method, and what does fail to download?
Do you mean fail to get into download mode, and you only can get into recovery?
Are you doing this to get to download mode?
Put your Note 2 in Download Mode
-First you will need to turn off your device.
-Once it’s off, you need to press this button combination: volume down, power button and home button.
-Keep them pressed until the download mode shows up.
-Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Obviously you want to press the volume up. Now you are ready to ODIN flash.
Click to expand...
Click to collapse
i would have tried ODIN for this situation but everytime i do. It says "FAILED" how would you suggest i fix this so that my phone can use ODIN. I was going from cyanogenMod to a custom ROM, but i assume i didnt flash the old ROM and now i kinda stuck in a bootloop like it'll show the samsung intro then show the customROM emblem stays there. I've left it in that state for a whole night and it didnt change (still showing the custom ROM emblem) the only thing i can do is enter TWRP v2.6.3.1 and access my external SD.

ViiRuZ said:
i would have tried ODIN for this situation but everytime i do. It says "FAILED" how would you suggest i fix this so that my phone can use ODIN. I was going from cyanogenMod to a custom ROM, but i assume i didnt flash the old ROM and now i kinda stuck in a bootloop like it'll show the samsung intro then show the customROM emblem stays there. I've left it in that state for a whole night and it didnt change (still showing the custom ROM emblem) the only thing i can do is enter TWRP v2.6.3.1 and access my external SD.
Click to expand...
Click to collapse
I don't understand this ....... It says "FAILED" What is failing ?
What are you flashing?

dicksteele said:
I don't understand this ....... It says "FAILED" What is failing ?
What are you flashing?
Click to expand...
Click to collapse
Sorry bout that. . just tried to connect my phone to ODIN in ODIN MODE. I'll update with what happened.
Just got done trying to flash with ODIN, and it got the part where it starts to install but 4 mins. in my device was removed. I was using the PDA from sammobile.com, and now my phone is saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." i know it might be as simple as actually doing what it says but Kies will not recognize my At&t samsung galaxy note II. What would u suggest to let my laptop recognize my device??

rangercaptain said:
Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.
Click to expand...
Click to collapse
Thank you for your time helping me with my phone issue. I took the steps you suggested, now im running custom ROM jellybean 4.1.1. and got my service provider back. If you could suggest away to get my stock program and upgrade to jellybean 4.3. I had fun with the rooted life but i make the worst mistakes.
PS. i found it to be alot easier using the other tar. in the firmware u suggested me to use. At least for At&t Samsung Galaxy Note II

rangercaptain said:
Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.
Click to expand...
Click to collapse
So i just flashed my at&t Samsung galaxy note II with jellybean 4.1.1 using Odin ( ATT_I317UCAMA4_I317ATTAMA4) and it was going on with everything working. Then i tried to update to jellybean 4.3 after it got done installing it rebooted, and what do u know, i'm stuck in boot loop the Samsung galaxy note 2 logo, and cant access recovery mode. Also I tried the original firmware that used repeatedly,would that hurt the system. Would there be any firmwares suggested to use.

ViiRuZ said:
So i just flashed my at&t Samsung galaxy note II with jellybean 4.1.1 using Odin ( ATT_I317UCAMA4_I317ATTAMA4) and it was going on with everything working. Then i tried to update to jellybean 4.3 after it got done installing it rebooted, and what do u know, i'm stuck in boot loop the Samsung galaxy note 2 logo, and cant access recovery mode. Also I tried the original firmware that used repeatedly,would that hurt the system. Would there be any firmwares suggested to use.
Click to expand...
Click to collapse
So you did the OTA update to 4.3?
I've been where you are lots of times....
Try post #2 from here
http://forum.xda-developers.com/showthread.php?t=2618447

dicksteele said:
So you did the OTA update to 4.3?
I've been where you are lots of times....
Try post #2 from here
http://forum.xda-developers.com/showthread.php?t=2618447
Click to expand...
Click to collapse
yes it updated and installed but after it installed and rebooted its in
a constant boot loop. Is this going to be a simple permanent fix?

ViiRuZ said:
yes it updated and installed but after it installed and rebooted its in
a constant boot loop. Is this going to be a simple permanent fix?
Click to expand...
Click to collapse
Yes
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

dicksteele said:
So you did the OTA update to 4.3?
I've been where you are lots of times....
Try post #2 from here
http://forum.xda-developers.com/showthread.php?t=2618447
Click to expand...
Click to collapse
Thank you for your help, i honestly do thank you. Its good that people like you are out there and are helpful enough to guides us (the ones who mess up)

ViiRuZ said:
Thank you for your help, i honestly do thank you. Its good that people like you are out there and are helpful enough to guides us (the ones who mess up)
Click to expand...
Click to collapse
Not a problem. Just giving back from all the help I've received over the years,

[Q] Is it bricked? If not what is it? What do I need to do? My life can depend on it.

Hi friends!!
After my S4 decided to run away without insurance I had to revert back to my s2. It still had Hellybean on it so I upgraded it to PA 4.45 just to check it out on my phone. Then I went into the instructions on how to unlock the phone. I went to revert it back to stock ICS that it came with to do so and when I rebooted it gets stuck at the samsung logo that pulses. I can't get into recovery but I still can get into download mode but nothing works when flashed. I tried using ODIN for every stock ROM available and still nothing. I never bricked a phone before and this doesn't seem like one to me since the bricks I fixed before have never been able to go into DL mode without being jigged, Can somebody help me. I need this running asap for medical reasons. I'm a sitting duck without this phone if something should happen to me. I live alone and have no land line if I need to call 911.

ScottPomroy said:
Hi friends!!
After my S4 decided to run away without insurance I had to revert back to my s2. It still had Hellybean on it so I upgraded it to PA 4.45 just to check it out on my phone. Then I went into the instructions on how to unlock the phone. I went to revert it back to stock ICS that it came with to do so and when I rebooted it gets stuck at the samsung logo that pulses. I can't get into recovery but I still can get into download mode but nothing works when flashed. I tried using ODIN for every stock ROM available and still nothing. I never bricked a phone before and this doesn't seem like one to me since the bricks I fixed before have never been able to go into DL mode without being jigged, Can somebody help me. I need this running asap for medical reasons. I'm a sitting duck without this phone if something should happen to me. I live alone and have no land line if I need to call 911.
Click to expand...
Click to collapse
Are you trying to boot into recovery while you are plugged into a computer?
Sent from my SGH-T989

jrc2 said:
Are you trying to boot into recovery while you are plugged into a computer?
Sent from my SGH-T989
Click to expand...
Click to collapse
Of course not. But I think the problem may be that I didn't know that Kies was still installed in this computer.
And removing Kies didn't work either. I was talking to a guy that does jtag repair near me he said try that first. Gave me a pit file and it didn't help.

ScottPomroy said:
Of course not. But I think the problem may be that I didn't know that Kies was still installed in this computer.
And removing Kies didn't work either. I was talking to a guy that does jtag repair near me he said try that first. Gave me a pit file and it didn't help.
Click to expand...
Click to collapse
Here is something something that has worked for me twice. Use JOdin3 ( https://builds.casual-dev.com/jodin3/) Plug your phone in before going to the websute and put the TWRP tar file in PDA. Click start. It will say it needs to obtain a pit file. Click OK. Ignore the part about using in the download mode combo. It should bootloop your phone and you then might be able to unplug your phone and boot into recovery. I use this as a last resort but it has worked twice for me.
Sent from my SGH-T989