Related
Hey Please help ,
I have a Samsung galaxy Note 2 n7100
There is problem logo hang on startup.!
Like this problem i took from customer.
Customer says when he downloading application from Playstore
Then suddenly phone get off.
After that when he switch on Phone just logo hang on startup!!
After i try it update via Odin.
When i make update its says fail.
& Odin say There is no pit partition.
I try 4rth file all r Same massage.
Br
SHAMIM
Try removing battery wait few seconds. Try process again.
riz157 said:
Try removing battery wait few seconds. Try process again.
Click to expand...
Click to collapse
Today full day i try it many way but Nothing Happaned.!!
Well this so called customer of yours didn't install an app(I think)he would have bricked it by rooting it (if he hasn't followed which cf to flash).. well this might help you say while flashing via odin 1st its says fail then 2nd attempt it says no pit... I had this similar issue on the s3 turned out it was a bad download try downloading the file again and make sure your downloading a file with n7100 not n700 (I bet you know this just a lil heads up) hope this works for you.. if all else fails... Samsung customer is the only way
Sent from my GT-N7100 using XDA Premium HD app
---------- Post added at 01:03 AM ---------- Previous post was at 12:55 AM ----------
Or better yet search for an xda user named Dr.ketan he's the best doc in note series... he might help you bring your device back too the way it was if he helps donate the lad he deserves it.. he's the only doc I know who doesn't charge a dime
Sent from my GT-N7100 using XDA Premium HD app
eyan2011 said:
Well this so called customer of yours didn't install an app(I think)he would have bricked it by rooting it (if he hasn't followed which cf to flash).. well this might help you say while flashing via odin 1st its says fail then 2nd attempt it says no pit... I had this similar issue on the s3 turned out it was a bad download try downloading the file again and make sure your downloading a file with n7100 not n700 (I bet you know this just a lil heads up) hope this works for you.. if all else fails... Samsung customer is the only way
Sent from my GT-N7100 using XDA Premium HD app
Click to expand...
Click to collapse
I think so someone put in phone bad firmware!
But now what can i do?
I try still 4 firmware & different provider
Europian,uae,Usa firmware also try or try different version of odin.Same it appear "There is no pit partition".
I try put in the phone cwm6-recovery-note2.tar.md5
It also not written by odin.!
At this moment Phone Condition Logo hang on startup.
No Recovery mode.
But Download mode ok.
Please help me urjent.
Wait a second aren't you suppose to put the file in pda.. the md5 goes in pda rite not in phone.. and usa firmware wont work be careful different hardware you'll brick it for life ... well the phone hasn't been launched their yet so no worries.. please confirm the name of the tar or md5 you downloaded
Sent from my GT-N7100 using XDA Premium HD app
---------- Post added at 01:23 AM ---------- Previous post was at 01:20 AM ----------
Omg im so sorry im working and texting you at the same time.. I just glanced at your text... dude search for an xda user named dr ketan he'll help you getting the pit file... its required too boot up your device
Sent from my GT-N7100 using XDA Premium HD app
How i confirm about TAR file?
You have to know?
dr.ketan still not responding by me.
last 2 days me & my phone still hanging on the my chember.
Please anyone help me about PIT file for N7100/
I think it can be help me.!!!
eyan2011 said:
Well this so called customer of yours didn't install an app(I think)he would have bricked it by rooting it (if he hasn't followed which cf to flash).. well this might help you say while flashing via odin 1st its says fail then 2nd attempt it says no pit... I had this similar issue on the s3 turned out it was a bad download try downloading the file again and make sure your downloading a file with n7100 not n700 (I bet you know this just a lil heads up) hope this works for you.. if all else fails... Samsung customer is the only way
Sent from my GT-N7100 using XDA Premium HD app
---------- Post added at 01:03 AM ---------- Previous post was at 12:55 AM ----------
Or better yet search for an xda user named Dr.ketan he's the best doc in note series... he might help you bring your device back too the way it was if he helps donate the lad he deserves it.. he's the only doc I know who doesn't charge a dime
Sent from my GT-N7100 using XDA Premium HD app
Click to expand...
Click to collapse
facebook.com said:
Today full day i try it many way but Nothing Happaned.!!
Click to expand...
Click to collapse
the customer is telling the truth. same thing happened to me. i've had 3 galaxy phones, & this is the first time it happened. i downloaded an app from Playstore. used it for a couple of hours. then exit the program. then after a few hours while playing a different game, my screen went black (which at first I though was due to low battery) then it turned on but only until the NoteII logo. Tried to charge my phone but the battery icon only had this white circle at the center, there wasn't a green bar that's supposed to be showing up when you're charging. I couldn't access the recovery mode. i could access the download mode though. I tried to install CMW & stock rom, but both failed. Odin said my phone has got no PIT file.... please help!
BTW. Let me just tell you more about the apps involved. I downloaded Zynga Poker from Playstore at around 1PM. Played it until maybe around 3PM. Exit the program though it's still sending me annoying notifications. Then at around 9PM, I played RuneMasterPuzzle, which I've been playing since I've got my phone. Actually I've had that in my S2 before & never had a problem. So I'm blaming Zynga Poker.
I really, really need your help. Please...
TIA
facebook.com said:
Hey Please help ,
I have a Samsung galaxy Note 2 n7100
There is problem logo hang on startup.!
Like this problem i took from customer.
Customer says when he downloading application from Playstore
Then suddenly phone get off.
After that when he switch on Phone just logo hang on startup!!
After i try it update via Odin.
When i make update its says fail.
& Odin say There is no pit partition.
I try 4rth file all r Same massage.
Br
SHAMIM
Click to expand...
Click to collapse
I have the same problem.
I tried many solutions like, flashing its ROM, fix partition, followed Dr. Ketan's advices. Still no good. I can access Odin Mode but I can't access my recovery.
Here's my situation:
http://forum.xda-developers.com/showthread.php?p=35133784#post35133784
What the hell. So I'm not the only one with this problem. Same goes for me. I checked mails on my note 2 when it suddenly went black and rebooted. Then it was stuck at the first bootscreen. I can also go into Download mode but not into recovery. I tried flashing Stock Roms, Rescue Rom, Custom Roms, Root and CWM but nothing ever changed the situation.....perhaps this is a bigger problem?!
This is my Thread: http://forum.xda-developers.com/showthread.php?t=2040464
Isn't there anybody able to help us?!
Try to closely read this http://forum.xda-developers.com/showthread.php?t=1923956.
Then try to use Note 2 Toolkit.
Does it work?
Among other features, this one (as stated on their thread):
Flash Stock Boot Image back to your phone
Click to expand...
Click to collapse
Problem with toolkit is that i does not see my phone. I can only get to download mode. Nothing else. Can't boot it up and when i try to use the toolkit it says that USB debugging needs to be enabled... well seems like that isnt the case, did not need it before so i think it's disabled :/
What did you do to the phone exactly?
Did you ever root it? Which root method did you use? From where did you follow instructions to do so?
Did you ever flash some firmware? Which one? What's the full name of the file you flashed?
EDIT: Please, these questions are mandatory to understand the issue.
Alright so it happened on sunday, my phone was complete Stock and i never installed root or custom rom before on this device. I was checking my mails when the phone suddenly rebooted. When it was up again i suddenly got the S-Voice instructions which i had to click through. After that the phone rebooted again. When i had to enter the PIN i just touched the screen for a second and the screen went black again. Now it rebooted to bootscreen and got stuck there. After that i tried anything to get it back to life. I am not able to enter recovery, only download mode.
In the meatime i flashed anything that looked promising. For example the newest Stock rom for my Note 2, CWM+ Root, Stock Recovery+ Root, Rescue Rom with PIT-File (got it here in the Forum for getting bricked phones back to live, it has all the files - phone, csc, modem, PIT and bootloader), Recovery Fix..... i tried anything but it still gets stuck at bootscreen and i was never able to get to recovery......
When i check in download mode my Counter is now at 10 and Current Binary and System Binary is Custom. Even when i flashed Stock Rom, System binary never changed back to Official. it's always custom....... Odin flashing is always succesful even tried it on different PCs....yet still getting stuck at bootscreen......
Dunno if there's even a way to get it back to live
Edit: I flashed my old Galaxy S up and down without problems and even when it was softbricked it was no problem for me to get it back to live. This time i just don't see any possible solution -.-
limital said:
Problem with toolkit is that i does not see my phone. I can only get to download mode. Nothing else. Can't boot it up and when i try to use the toolkit it says that USB debugging needs to be enabled... well seems like that isnt the case, did not need it before so i think it's disabled :/
Click to expand...
Click to collapse
Did this also. When I plug the USB Cable, PC will beep (detected by PC, meaning driver is working) But in Toolkit's Interface, Phone's serial number is not showing. What I can do in Toolkit is to Launch Odin, well, Odin can detect the phone. BUT after flashing. It will reboot to the first boot screen.
Is this a sort of a SOFT BRICK?
Is it already a hardware problem? like fried chip or something?
I'm already running out of options here. :crying:
Well at the moment i haven't found anyone who is able to help us and i tried many different things to get it working again. Without success....
Perhaps somewhere here on xda we will find a savior but at the moment i don't see any hope for our devices but to send them to samsung :/
After reading some threads and searching for the cause of the problem, well, that thing, i must say that "Reboot of Death" LOL! happened under normal use, stock, unrooted Note2s.
Some threads with the same problem.
http://forum.xda-developers.com/showthread.php?t=1927150&page=2
http://forum.xda-developers.com/show....php?t=2040464
http://forum.xda-developers.com/showthread.php?t=2034323
I tried these stuff (didn't work for me):
Note 2 Toolkit
http://forum.xda-developers.com/show....php?t=1923956
Dr. Ketan's Thread
http://forum.xda-developers.com/showthread.php?t=1930418
[FIX] Broken cache partition / recovery ( Mobile ODIN, Triangle Away )
http://forum.xda-developers.com/showthread.php?t=1932327
I guess I need to read more and research more.
If you know where we can find the fix for this kindly help us.
Thanks!
Tried the same things you did and a bit more for example:
- Rescue Firmware:
http://forum.xda-developers.com/showthread.php?p=32273406#post32273406
- CWM+Root
http://forum.xda-developers.com/showthread.php?t=1901196
- TWRP
http://forum.xda-developers.com/showthread.php?t=1938733
Nothing changed. No recovery after flashing any of these only download modus. Still stuck at bootscreen
Tried some other Stock firmwares but i'm still stuck at bootscreen :/
Same thing happened with me aswell. I went again to download mode and flashed CWM first. After flashing CWM i wiped dalvik, cache partition & then data reset. Ofcourse i lost my apps but i had phone & sms backup with me.
Later i flashed a new firmware thru pc odin & everything was fine. The phone started perfectly. Give a try. Hope it works for u aswell.
Sent from my GT-N7100 using xda premium
If you did something stupid or flashed incompatable kernel with a rom and then tried to return to stock by following Adam's guide and it completed but get's stuck at the [email protected] screen and you think you are screwed well you aren't you just have to use kies but try this first: "Usually when you are stuck on the AT&T screen after Odin, you do not even have to use kies.
A lot of the time if you just boot into factory recovery and factory reset from there it will boot up fine after that. Actually this works just about every time" Thanks to "jthrasher47" for that. If that doesn't work for you than continue by using kies. And if all else fails we have one last option thanks to "ou812bkewl" It seems to be a last resort and probably the most not noob friendly but a very well written guide, here is the link: http://forum.xda-developers.com/showthread.php?p=43512474
Here is a guide:
First this will most likely work for all Gs4's Canadian and all But not tested. I used on my [email protected] and It restores it back to factory stock no issues whatsoever. Also I have noticed that you might not even have to put your GS4 into "Download Mode" Just plug in and turn it on if you have really f'd up your phone and then just follow these simple directions.
1.Write down your Model and Serial which is found behind the battery on the sticker.
2.Plug Phone into a Good USB with a Good Cable and start up phone in download mode ( Power button Plus Volume down, then hit Volume up to continue.
3.Download and install Kies http://storagecow.tk/index.php?dir=Xda%2FJohnMonsour%2FKies+SoftBrick+Recovery%2F
4.Start Kies and Click Tools-> Firmware upgrade and initilazation up in the top tabs.
5.Type in model of your phone for example if on US AT&T: SGH-I337 ( all in capital letters) click OK, that you wrote down from the first step and click OK
5.There will be info about firmware click OK
6.Info about software version. Put your phone in download mode by pressing volume down key, home button and power button then connect to PC using orginal USB cable, click OK
7. Follow info on screen.
8. Phone will reboot by itself when all is done correctly.
Good luck Hope this help's some people that have soft or hard bricked.
JohnMonsour said:
If you did something stupid or flashed incompatable kernel with a rom and then tried to return to stock by following Adam's guide and it completed but get's stuck at the [email protected] screen and you think you are screwed well you aren't you just have to use kies.
Click to expand...
Click to collapse
Usually when you are stuck on the AT&T screen after Odin, you do not even have to use kies.
A lot of the time if you just boot into factory recovery and factory reset from there it will boot up fine after that. Actually this works just about every time
Sent from my SAMSUNG-SGH-I337 using xda premium
jthrasher47 said:
Usually when you are stuck on the AT&T screen after Odin, you do not even have to use kies.
A lot of the time if you just boot into factory recovery and factory reset from there it will boot up fine after that. Actually this works just about every time
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Hmmmmmm Thanks, wish I would have tried that. But I couldn't even get into the factory recovery at one point in time and this has almost worked in every situation. But next time I odin back after trying some crazy stuff and I get stuck at that screen I'll give it a try. Thanks.
JohnMonsour said:
Hmmmmmm Thanks, wish I would have tried that. But I couldn't even get into the factory recovery at one point in time and this has almost worked in every situation. But next time I odin back after trying some crazy stuff and I get stuck at that screen I'll give it a try. Thanks.
Click to expand...
Click to collapse
Added to the op and thanked you.
If this doesn't work, I have a boot loader Odin package here: http://forum.xda-developers.com/showthread.php?p=43512474 I couldn't get Kies to fix me at all. It would fail every time.
ou812bkewl said:
If this doesn't work, I have a boot loader Odin package here: http://forum.xda-developers.com/showthread.php?p=43512474 I couldn't get Kies to fix me at all. It would fail every time.
Click to expand...
Click to collapse
Adding
JohnMonsour said:
Added to the op and thanked you.
Click to expand...
Click to collapse
No problem.
Sent from my SAMSUNG-SGH-I337 using xda premium
Thanks for the thread OP. This is very useful info for those that soft-brick their phones.
I soft-bricked my SG4 using a hacked I9505 image (that had the apps-SD update) + I337M kernel & tried to move back to a factory image via odin roms (used the official roms & kernel from sammobile). Was nasty - tried everything to get unbricked from AOSP/ to stock roms to saved nandroids. All left the phone dead except for recovery & download modes.
I had actually found this procedure on my own before seeing this thread, but it was pretty much step-by-step the same thing I did. After doing this, my phone booted to the same state it was in when I brought the phone home from the Virgin store -- including all the 'official' tags showing on the download mode.
penguinjoe said:
Thanks for the thread OP. This is very useful info for those that soft-brick their phones.
I soft-bricked my SG4 using a hacked I9505 image (that had the apps-SD update) + I337M kernel & tried to move back to a factory image via odin roms (used the official roms & kernel from sammobile). Was nasty - tried everything to get unbricked from AOSP/ to stock roms to saved nandroids. All left the phone dead except for recovery & download modes.
I had actually found this procedure on my own before seeing this thread, but it was pretty much step-by-step the same thing I did. After doing this, my phone booted to the same state it was in when I brought the phone home from the Virgin store -- including all the 'official' tags showing on the download mode.
Click to expand...
Click to collapse
Thanks for the confirmation and yeah hopefully this will help some people. If not we have a few options to try and they are all in this one place.
well, i now find myself needing to recover from a botched AROMA install using an I9505 ROM; device froze and rebooted before loki patch was installed. tried this method and the ODIN method using files from SamMobile but neither worked. any suggestions would be appreciated. thanks!
UPDATE: ODIN worked after i uninstalled KIES software, friggin driver issue .
Glad you got it working!
Sent from a fully Unlocked including bootloader SGS4 64gb Google edition. ROM: Changes almost everyday. Currently running stock 4.3 with CWM and super user.
thanks
THANKS for this you same me a lot work super
thanks JohnMonsour:good::good::good:
rantoca said:
THANKS for this you same me a lot work super
thanks JohnMonsour:good::good::good:
Click to expand...
Click to collapse
Always a Pleasure.
Alright I'm about to write a in depth tutorial to you restore to stock on MF3 and an extensive how to guide. Can't believe this thread got dug back up..... I'm guessing 4.3 is out on [email protected] again over kies and OTA... If you have MF3 or MDB or MDL then you need to freeze the proper files asap before your device downloads and installs the new update. Idk though.... Sorry Rantoca? What base-band are you running and what did kies restore your phone to? MDL??? Or the New MJ9? Correct me if I am wrong But I think 4.3 official is MJ6 Or MJ9????? Right Anyways? Is it out once again. And instead of pulling up old threads. Just hit the Thanks under peoples Usernames instead of posting a comment. For future reference. And you are welcome. MF3 User's Do not install the new 4.3 as we are currently working on a g-fuse reset downgrade method. Or slowly but surly we are getting to the bottom of the encryption scheme. Now I am at 9457 Commits..... LOL. My friend has his jtag unit and we have two locked versions. Guess which variants? Anyone???? Big Red and Orange and Blue... HAHA. Then a Pink Variant and Also your favorite mullti-flavored Popsicle variant with a hint of vanilla.
Nevermind Read in your threads that you got stuck on the splash screen after flashing kit-kat. So Kies still has 4.2.2. AMDL.... But not for long. You are extremly lucky that they pulled the 4.3 Update off of Kies and OTA or you would have been up the creek..... I"ll Update that thread is obsolete and post a Multi-Recovery guide that uses Heimdall and Odin 3.04 My favorite version. On we go!!!
thanks
i was running on MDL and i was like crazy reading how i can get it back
maybe this one is the 3rd thanks for your info but help me a lot :good::good:
rantoca said:
i was running on MDL and i was like crazy reading how i can get it back
maybe this one is the 3rd thanks for your info but help me a lot :good::good:
Click to expand...
Click to collapse
HAHAH. I am glad!
SOooO I'm just some tinkering nut that likes to check out all of the roms out there for my devices. Flashing is worse than crack for me. I have bricked de-bricked and re-bricked this poor little galaxy and updated to 4.3 and downgraded back to 4.0 all to make it look like it just came out of the box again. nice clean bootloader. A factory rom. 0 flash count which is simply nutz since this thing should be a stripper I have flashed it with so many Roms and Mods. I have pretty much every file you can think of for this device on my computer and I am more than happy to share my information and tips with the community here at xda.
If you think you need some assistance and don't want to spend 3days hopped up on pizza and mt.dew searching every inch of the forums looking for answers feel free to ask me and I can try my best to help out.
I have almost every custom Rom out for this device.
I have Custom Kernels from chapters 4.0.3 - 4.1.1 - 4.3 - 4.4
I have Debrick Images from the first three chapters will make one for 4.4 when I see a stable Rom
I have Stock Rom Files
I have updated Stock Rom Files.
I have updated rooted no knox Files
I have a crap load of continuous hours of searching breaking and Fixing this poor little thing.
I would have made a Tutorial page but it looks like there are plenty on the forums. I KNOW I've read them all:silly:
so I would rather put my knowledge to use in letting you simply ask me a question and I will reply as quickly as possible.
I know its going to sound nubcake. Buuut.... this is my daily device and I know how frustrating it can be when you have made one of them fatal mistakes and your device goes black or won't flash your new custom rom you want to test out.
Shoot some questions my way and see if I can't help you out quicker than you searching the 4 corners of the net.
datbager said:
SOooO I'm just some tinkering nut that likes to check out all of the roms out there for my devices. Flashing is worse than crack for me. I have bricked de-bricked and re-bricked this poor little galaxy and updated to 4.3 and downgraded back to 4.0 all to make it look like it just came out of the box again. nice clean bootloader. A factory rom. 0 flash count which is simply nutz since this thing should be a stripper I have flashed it with so many Roms and Mods. I have pretty much every file you can think of for this device on my computer and I am more than happy to share my information and tips with the community here at xda.
If you think you need some assistance and don't want to spend 3days hopped up on pizza and mt.dew searching every inch of the forums looking for answers feel free to ask me and I can try my best to help out.
I have almost every custom Rom out for this device.
I have Custom Kernels from chapters 4.0.3 - 4.1.1 - 4.3 - 4.4
I have Debrick Images from the first three chapters will make one for 4.4 when I see a stable Rom
I have Stock Rom Files
I have updated Stock Rom Files.
I have updated rooted no knox Files
I have a crap load of continuous hours of searching breaking and Fixing this poor little thing.
I would have made a Tutorial page but it looks like there are plenty on the forums. I KNOW I've read them all:silly:
so I would rather put my knowledge to use in letting you simply ask me a question and I will reply as quickly as possible.
I know its going to sound nubcake. Buuut.... this is my daily device and I know how frustrating it can be when you have made one of them fatal mistakes and your device goes black or won't flash your new custom rom you want to test out.
Shoot some questions my way and see if I can't help you out quicker than you searching the 4 corners of the net.
Click to expand...
Click to collapse
What spetps I need to do to re flash previous bootloader?... im in 4.3
torreon901 said:
What spetps I need to do to re flash previous bootloader?... im in 4.3
Click to expand...
Click to collapse
I did not do any boot loader flashing. sorry wow first question and I already fail.
If I had to take a wild guess and you still have access to cwm or twrp flash the stock rom and you should be good.
torreon901 said:
What spetps I need to do to re flash previous bootloader?... im in 4.3
Click to expand...
Click to collapse
I take no responsibility if you mess up your phone but take a look here. http://forum.xda-developers.com/showthread.php?t=2083860 may be what your looking for.
torreon901 said:
What spetps I need to do to re flash previous bootloader?... im in 4.3
Click to expand...
Click to collapse
If you go from the 4.3 bootloader to a previous one, you will brick your device via an e-fuse. You shouldn't need to revert to an older bootloader anyway unless for a specific rom. If that is the case, you are better off waiting until the developer catches up.
datbager said:
I take no responsibility if you mess up your phone but take a look here. http://forum.xda-developers.com/showthread.php?t=2083860 may be what your looking for.
Click to expand...
Click to collapse
Also, please don't use anything off this page unless you have an international version of the S3. I am guessing you have the I747, DO NOT FLASH SOMETHING NOT MADE FOR YOUR PHONE! :highfive:
Here is where you need to start...http://forum.xda-developers.com/showthread.php?t=2321310
There is even a PSA in red letters about reverting from a 4.3 bootloader.
datbager said:
Shoot some questions my way and see if I can't help you out quicker than you searching the 4 corners of the net.
Click to expand...
Click to collapse
how do you create a debrick.img? My phone is in working condition but I just want to be prepared for down the road
Pretty sure I bricked it
I have an ATT Galaxy S3. I had OTA 4.3, and i just rooted it, installed TWRP, and made a backup. Then I wiped, and tried to install a custom rom, and failed. Could not restore back up, and after multiple times of trying to flash this odin : http://forum.xda-developers.com/showpost.php?p=46954804&postcount=119[/URL]. and failed attempts to even get Heimdall to even work, my Phone is now in this state when turned on:
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: Yes (3 counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 1
BOOTLOAD RP SWREV: 2
SWREV CHECK FAIL : Fused 2 > Binary 0
Any help would be grateful.
Edit. More info
I have found I can flash TWRP but I am unable to mount SDCard. it just doesn't do anything. same thing with CWR.
and KIES tries to run a firmware recovery and fails. looks like it trieds to installs 4.1
Still looking for help. Thanks.
thenowherekid said:
I have an ATT Galaxy S3. I had OTA 4.3, and i just rooted it, installed TWRP, and made a backup. Then I wiped, and tried to install a custom rom, and failed. Could not restore back up, and after multiple times of trying to flash this odin : http://forum.xda-developers.com/showpost.php?p=46954804&postcount=119[/URL]. and failed attempts to even get Heimdall to even work, my Phone is now in this state when turned on:
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: Yes (3 counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 1
BOOTLOAD RP SWREV: 2
SWREV CHECK FAIL : Fused 2 > Binary 0
Any help would be grateful.
Edit. More info
I have found I can flash TWRP but I am unable to mount SDCard. it just doesn't do anything. same thing with CWR.
and KIES tries to run a firmware recovery and fails. looks like it trieds to installs 4.1
Still looking for help. Thanks.
Click to expand...
Click to collapse
So i was able to get a micro SD card and download the files from here http://forum.xda-developers.com/showthread.php?t=2498233
Used TWRP to install the bootloader/modem, then the rom, then the kernel. After it installed successfully I rebooted the phone. Nothing comes up. It doesn't respond to power button, or download or recovery button sequence. When i plug it into my computer, device manager recognizes it as a port. Qualcomm HS-USB QDLoader 9008 (COM13)
thenowherekid said:
So i was able to get a micro SD card and download the files from here http://forum.xda-developers.com/showthread.php?t=2498233
Used TWRP to install the bootloader/modem, then the rom, then the kernel. After it installed successfully I rebooted the phone. Nothing comes up. It doesn't respond to power button, or download or recovery button sequence. When i plug it into my computer, device manager recognizes it as a port. Qualcomm HS-USB QDLoader 9008 (COM13)
Click to expand...
Click to collapse
sorry I didn't ever encounter that in my adventures with the device. I have quickly discovered that there are too many issues with them and the flashing. I have had more problems and bricked states than I care to look at. I got the phone operating and gummy installed on it and left it at that.
datbager said:
sorry I didn't ever encounter that in my adventures with the device. I have quickly discovered that there are too many issues with them and the flashing. I have had more problems and bricked states than I care to look at. I got the phone operating and gummy installed on it and left it at that.
Click to expand...
Click to collapse
Thanks.
Sudden Death AT&T GS3
Hi,
I have an AT&T Samsung Galaxy S3. I was running CM11 nightlies. It was working perfectly fine for all these days. Couple of days back it suddenly died. The phone hasn’t been switching on back since then. I tried putting it on full charge. Whenever I pull out the battery and reinsert it, it vibrates, The LED comes on and the Samsung screen comes on for a second and turn turns off again. I cannot access the recovery or download modes through the key combinations. I also tried going into download mode using a Jig. I have to remove the battery and reinsert it. The Jig did work and the phone did go into download mode but, only for a second and then turns off. I’m not sure what exactly the issue is.
I would be very grateful if you could help me find a solution.
Thanks.
thenowherekid said:
Thanks.
Click to expand...
Click to collapse
ok this is not for your device but it is a guide and you can look up a kid that has a video on youtube. scroll down to device firmwares and select your model. but this is the link to help you. http://forum.xda-developers.com/showthread.php?t=2369125
your help
IcemanReturns said:
Hi,
I have an AT&T Samsung Galaxy S3. I was running CM11 nightlies. It was working perfectly fine for all these days. Couple of days back it suddenly died. The phone hasn’t been switching on back since then. I tried putting it on full charge. Whenever I pull out the battery and reinsert it, it vibrates, The LED comes on and the Samsung screen comes on for a second and turn turns off again. I cannot access the recovery or download modes through the key combinations. I also tried going into download mode using a Jig. I have to remove the battery and reinsert it. The Jig did work and the phone did go into download mode but, only for a second and then turns off. I’m not sure what exactly the issue is.
I would be very grateful if you could help me find a solution.
Thanks.
Click to expand...
Click to collapse
once again not for your device but scroll down to stock firmwares and READ the whole guide. There is a kid that makes a video some where arround here as well. http://forum.xda-developers.com/showthread.php?t=2369125 you need a 16gb class 10 sdcard or larger as well for this
Disk Space Back
I had trouble getting my max disk space after I did the debrick trick. So i'm going to shoot a quick tip to get all your space back.
go to your windows start menu and in the search type diskpart and hit enter.
in the command line type "list disk" no quotations and enter.
You should see your hard drive and any other storage devices connected in you computer. Determine which one is the sd card.
Next in the command line hit select disk x. x represents your sdcard.
last is clean disk in command line and your sd card has all its space but you must reformat it how ever you choose.
I just used sd formater.
hope that helps some peeps if so hook a noob up with some thanks clicks. :good:
Hi I have 4.1.1 rooted and twrp and I want to flash the collective rom which is 4.4. I have notbflashed this phone yet but I have done ot before on my captivate. What should I look out for and are there any stepsb I need to take before I flash, I.e. update bootloader etc and if so which one do i use
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
hmm
trug2002 said:
Hi I have 4.1.1 rooted and twrp and I want to flash the collective rom which is 4.4. I have notbflashed this phone yet but I have done ot before on my captivate. What should I look out for and are there any stepsb I need to take before I flash, I.e. update bootloader etc and if so which one do i use
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I ended up doing the upgraded bootloader stuff and flashed
Android 4.3 I747UCUEMJ2 for AT&T Galaxy S3 I747
wich you can find here of course I take no credit just showing you where to look.http://wccftech.com/update-att-galaxy-s3-i747-leaked-ucuemj2-android-43-jelly-bean-firmware/
if I help hook a noob up with a thanks click its just a click. :laugh:
datbager said:
I ended up doing the upgraded bootloader stuff and flashed
Android 4.3 I747UCUEMJ2 for AT&T Galaxy S3 I747
wich you can find here of course I take no credit just showing you where to look.http://wccftech.com/update-att-galaxy-s3-i747-leaked-ucuemj2-android-43-jelly-bean-firmware/
if I help hook a noob up with a thanks click its just a click. :laugh:
Click to expand...
Click to collapse
Can you help me with this? I copied my thread :3
LiLTrippz said:
*I bought this off a friend of mine.*
All he told me was that he tried installing a rom and he thinks that he installed a rom for a different model S3.
What Happens/What I Did?
1. I tried to plug it into the computer and the computer doesn't show that anything plugged in, the S3 doesn't turn on. NOTHING.
2. I connected the phone to the PC without the battery inside and the phone responds with one RED light at the top left of the phone. Nothing shows up on my computer still, not even that the phone was connected NOTHING.
3. I bought a JIG device and tried plugging it into my phone and it doesn't work. (I previously tested this JIG on another samsung device and it worked)
4. I tried doing the method to use a 16gb SD card and downloading an i747m debrick IMG and using Win32FlashTool to copy it to my SD Card. I tried with 2 different cards the first one was a 16gb SD card and the other was a 32gb SD card.
5. Through a lot of research I found a leaked way to unbrick the Samsung Galaxy S3 i9300 by shorting out the R313 chip, I'm sure you guys are all aware of this method. I opened my device and couldn't find the R313 chip. After further research I found that a user was able to locate the R313 chip on the i747m and he'd unbricked his phone with that method. If anyone can help me locate the i747m R313 chip it'd be GREATLY appreciated!
If anyone can help me out it would be great! I'm very experienced at soldering so if there's a method that requires me to solder I'm more than confident I can do it.
Thank you!! :good:
Click to expand...
Click to collapse
i have the dlk3 boot loader do I need to go to mjb?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
trug2002 said:
i have the dlk3 boot loader do I need to go to mjb?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I am not an expert but I'm pretty sure you need the mjb2 but there are guides all over that point misleading information. I can post a link that I believe is helpful. And as always I take no credit just pointing a finger here.
http://www.usofttech.com/t51443.html
:good:
Hello all. I am new to this, so please bare with me and understand I am just looking for help and not a hard time. I have an ATT Note 2, which I had rooted with Cyanogenmod (I believe 10.2). It was very easy with the helpful installer that is supplied, so easy even I could do it. However, shorty after running that mod, I realized why I had the Note 2 to begin with, the S Pen! Long story short, I did what I could to get the original Touchwiz/stock rom back.
I did NOT create a back up, which was where my problem starts. Now to remedy my problem, I had to find a stock rom through this site and other means. I don't remember what rom I actually used because it was on a previous PC I was using. But, I was able to go from Cyanogenmod back to Touchwiz. Thank god! Problem gets worse. I was on vacation, and all of a sudden I recieved an OTA update. Like I said, I was on vacation, not paying attention, the update started and was in progress when I started thinking, oh ****, I wonder if there is going to be a problem. Yep, there was a problem...
After the update installed, on reboot, the phone was stuck on the "Samsung Galaxy Note II" screen. I tried recover mode, no go. I tried recovery mode multiple times, no go. DAMN! No phone on a road trip is horrific! So when it wasn't my turn to drive, I attempted to flash stock roms back onto my phone as I originally did, via Odin, and same deal. I CAN find roms that will "succeed" in Odin, and on reboot, gets stuck on the same screen.
Out of frustration, I have tired other roms, some succeed, some fail. When they succeed, all have the same result, back to the same screen I previously described. However, when they fail, they bring me the the "firmware update" screen(sorry if I can't describe that screen better, but its the screen that suggests using Kies to fix the problem and update firmware. I have searched about as much as I can handle online and in forums about how to fix this. I have tried every approach. Different roms, I have tried the Kies method (which has attempted to work), however when its completed updating on Kies the phone says "unsupported version", which leads me to believe I am stuck half way in Root and half way stock.... or something, remember, I am no pro at this.
My phone isn't damaged, although I am not sure if the happenings have stressed the internals enough to fry anything. All I know is that its frustrating and would greatly appreciate any help that could be offered. I halfway thought about that $40 service that remotes your PC and will root your phone for you, but had a moment of clarity and decided a bunk phone and virus infected laptop wouldn't make anything better.
So in ending, be gentle, but please, give me any way I can fix my phone, whether it be back to stock or rooted, either way. Thanks
Boot into recovery and factory reset.
your device is modified so no update available
Hi
I am new in this forum. I have note 2 i317m locked to rogers. I rooted it using odin and now current version is 4.1.1 and then I unlocked it.
I am trying to update software to 4.3 but it is showing a msg.... your device is modified so update is not available. Can anyone tell me how can I update it and will that updating keeps my phone unlocked or not.....
thanks
again
rangercaptain said:
Boot into recovery and factory reset.
Click to expand...
Click to collapse
again.... I can't put the phone into recovery mode... I am able to get into download mode, or the "Samsung Galaxy Note II" screen, that is it. That is why I am requesting help from the pros out there.
update locked?
meharkhera said:
Hi
I am new in this forum. I have note 2 i317m locked to rogers. I rooted it using odin and now current version is 4.1.1 and then I unlocked it.
I am trying to update software to 4.3 but it is showing a msg.... your device is modified so update is not available. Can anyone tell me how can I update it and will that updating keeps my phone unlocked or not.....
thanks
Click to expand...
Click to collapse
Thanks for replying to this post. But I can not help you with your question. I am trying to tackle the issue with my phone... Is there a way I can root ANYTHING on my phone? or back to 4.1.1 or anything?
titostats said:
Thanks for replying to this post. But I can not help you with your question. I am trying to tackle the issue with my phone... Is there a way I can root ANYTHING on my phone? or back to 4.1.1 or anything?
Click to expand...
Click to collapse
Go to galaxynote2root.com and find the 4.1.1 firmware and instructions. ....that works for me......
gud luck
---------- Post added at 08:17 PM ---------- Previous post was at 08:09 PM ----------
You can try this link to see the solution to ur problem or the site to find suitable answer
true-android.blogspot.ca/2013/11/install-vlucmk5-android-43-jb-firmware.html?m=1
Gud luck
First off stay away from 4.3 lol. Anyways to get back to take ota you need to get chainfire autoroot and run in Odin, run triangle away, full unroot in super user. Reboot.
Check status if still says modified go into recovery pwr+vol up+home button and do reset.
You should be good to go. Good luck.
Hello to everyone. This is my first adventure. I've read until my eyes have bleed but still haven't figured out a solution to my problem so I will ask scaringly...
I have a AT&T Samsung Note II SGH-I317 rooted.
My phone is currently stuck on "Samsung GALAXY Note II" screen after I did a factory reset.
Initially this worked but as I was setting everything back up, I received a ota system update. And it gave me a failure to upgrade error, try again in kies. Kies will not recognize my phone because it's stuck. I've done the hold up volume + home then power a hundred times but it won't let me go into recovery. I've read of everyones success but I'm still stuck! I used stock roms from at least 5 different sources but none have fully recovered my phone. It does however PASS in odin 3.07 and 3.09.
What other options have I missed? Please help....
poochieturner said:
Hello to everyone. This is my first adventure. I've read until my eyes have bleed but still haven't figured out a solution to my problem so I will ask scaringly...
I have a AT&T Samsung Note II SGH-I317 rooted.
My phone is currently stuck on "Samsung GALAXY Note II" screen after I did a factory reset.
Initially this worked but as I was setting everything back up, I received a ota system update. And it gave me a failure to upgrade error, try again in kies. Kies will not recognize my phone because it's stuck. I've done the hold up volume + home then power a hundred times but it won't let me go into recovery. I've read of everyones success but I'm still stuck! I used stock roms from at least 5 different sources but none have fully recovered my phone. It does however PASS in odin 3.07 and 3.09.
What other options have I missed? Please help....
Click to expand...
Click to collapse
Weird, ODIN should usually work without issue. Are you using the custom recovery or a stock recovery? You should be able to flash a new recovery with ODIN I believe.
Are you using the factory USB charging cable? Knock-off cables cause odin and kies errors.
Reply
They were all stock recovery. As I mentioned before, the first time I done it, it worked fine but once I received the update from at&t I've not been able to duplicate that process without get stuck. I can access download and that's it.
Yes, I'm using the usb that came with my phone. ODIN recognizes my phone immediately.
poochieturner said:
They were all stock recovery. As I mentioned before, the first time I done it, it worked fine but once I received the update from at&t I've not been able to duplicate that process without get stuck. I can access download and that's it.
Yes, I'm using the usb that came with my phone. ODIN recognizes my phone immediately.
Click to expand...
Click to collapse
I'm having this same exact problem under very similar circumstances. Has anyone found a solution?
Thanks Man
hylander2126 said:
I'm having this same exact problem under very similar circumstances. Has anyone found a solution?
Click to expand...
Click to collapse
Followed your post and got mine working also.. Bootloader did it! Thanks...