any one know what program has the # codes i flashed PARANOIDANDROID but he doesn't have them in the rom so have my back up just need to know what the name is of program or programs thanks
* #1234# to check software version of phone.
*#12580*369# to check software and hardware information.
*#0228# Battery status (ADC, RSSI reading)
*#32489# Service mode
*#7780# factory data reset galaxy y
*2767*3855# Full factory reset (Don't dial it does not ask you to confirm unless you have problem)
Do those work on non tw roms? I thought the dial codes were tw only.
Sent from Pluto.
Dialer codes do not work with AOSP roms.
Sent from my SPH-L710 using xda app-developers app
pastert33 said:
Dialer codes do not work with AOSP roms.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
This gent here is correct; the # code only work on sprint TW roms.
Doh ok will have to flash back and fourth
Sent from my PG86100 using xda premium
since dial codes are tw only
so what rom is a tw one?
flashed back to the stock it has here and no luck...
did not do a nano before i flashed so need to know what rom has the codes enables or a nano that is stock
nm got it
Related
How do you edit the MSL on AOSP rom, If you can't put digit codes on AOSP roms to enter your MSL Code ???
AOKP Milestone 5 ROM (based on Android 4.0.4 ICS)
*#*#3282#*#*
BUMP
Bump
Sent from my SPH-D710 using xda premium
I'm pretty sure you have to go back to el29 to do that.
rwright64 said:
I'm pretty sure you have to go back to el29 to do that.
Click to expand...
Click to collapse
I agree any touch wiz Rom will work. But you have to really know what you are doing with ICS.
On touchwiz its ##_____## on aosp its *#*#_____#*#* if your talking about the dialer codes.
shiftr182 said:
On touchwiz its ##_____## on aosp its *#*#_____#*#* if your talking about the dialer codes.
Click to expand...
Click to collapse
But on aosp you can't do anything. When it asks for msl you get that modem error.
Sent from my SPH-D710 using XDA
Why are you needing to edit MSL? Just curious because if you go back to 29 you are better off to stay where you are unless you need to...
It asks for a lock code, NOT MSL. No one knows what this is so far.
Sent from my SPH-D710 using Tapatalk
bean said:
It asks for a lock code, NOT MSL. No one knows what this is so far.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Lock code for ICS I believe is 777468. Sfhub posted it on the 3rd post of his FE07 Odin one click. Not sure if its the same for AOSP though since his thread is about a TWiz rom.
Sent from my SPH-D710 using Tapatalk
If you are wanting to edit msl use cdmaws or qpst.. If you are trying to access dealer codes.. Try a few working hiddenmenu.apk's..
And that is the correct lock code for ics.. I think all prerelease versions
Sent from my SPH-D710 using XDA
I was trying to access some of the secret codes through the dialer and none of them are working. After typing them in it says "Connection problem or invalid MMI code"
I'm running codename with ktoonsez kernel. Any suggestions?
EDIT: I don't know if it matters, but I should also let you know that I'm with Rogers
What secret code?
Sent from my SGH-I747 using xda app-developers app
for example *#0*# in the dialer should take me to a test mode shouldn't it?
Sorry I don't know if there's an actual technical term for these codes I just always see them referred to as secret codes lol
those codes will not work on aosp based roms. which codenameandroid is. if you need to use those codes you will need to flash back to a touchwiz based rom.
ahhh i see. makes sense lol thanks!
Hi guysI've Just gotten my galaxy note and I can't seem to find the dialer codes that are used to check phone information.
Back then it was*#*#4636#*#*Or something like that, has anyone figured out what are the dialer codes for our galaxy note 2?
Sent from my GT-N7105 using xda app-developers app
Frostyeo said:
Hi guysI've Just gotten my galaxy note and I can't seem to find the dialer codes that are used to check phone information.
Back then it was*#*#4636#*#*Or something like that, has anyone figured out what are the dialer codes for our galaxy note 2?
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Samsung secret codes: http://tricks-world110.blogspot.nl/2012/07/all-samsung-mobile-secret-codes.html.
Tried it out but doesn't really work, anyone else tried? Must I be rooted?
Sent from my GT-N7105 using xda app-developers app
Frostyeo said:
Tried it out but doesn't really work, anyone else tried? Must I be rooted?
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Hello sir,
You doesn't need to root your device for some code to run successfully,
Try this few code as I used it before this to check my faulty device :
#*0*# - To run some test on your device.
#*0011# - To run Service Mode. There's an option to Turn Off the Wifi Power Saver Mode
*#1234# - To check your device Version of Android.
Hope this can help sir as this is a few notable code that I used to check on device before this.
zulljoe88 said:
Hello sir,
You doesn't need to root your device for some code to run successfully,
Try this few code as I used it before this to check my faulty device :
#*0*# - To run some test on your device.
#*0011# - To run Service Mode. There's an option to Turn Off the Wifi Power Saver Mode
*#1234# - To check your device Version of Android.
Hope this can help sir as this is a few notable code that I used to check on device before this.
Click to expand...
Click to collapse
Actually, for me I have to use:
*#0*#
and
*#0011#
Typos?
No eeffing Codes work for me!!!
gicarey said:
Actually, for me I have to use:
*#0*#
and
*#0011#
Typos?
Click to expand...
Click to collapse
I've tried so many codes from "Samsung secret codes" and also this site but nothing i get message saying " connection problem or invalid MMI code" i have the GT-N7105, running cm 10.1, with twrp recovery, Please help!! I've so many different service mode codes but nothing works am i doing something wrong ?
#Gizm0# said:
I've tried so many codes from "Samsung secret codes" and also this site but nothing i get message saying " connection problem or invalid MMI code" i have the GT-N7105, running cm 10.1, with twrp recovery, Please help!! I've so many different service mode codes but nothing works am i doing something wrong ?
Click to expand...
Click to collapse
Codes for Sammy and AOSP based roms are different.
On CM10.1 *#*#4636#*#* (or something similar) will work. On Sammy based it won't.
note 2
DubelBoom said:
Codes for Sammy and AOSP based roms are different.
On CM10.1 *#*#4636#*#* (or something similar) will work. On Sammy based it won't.
Click to expand...
Click to collapse
Thank you very much for the response but that one I already know, the code that doesn't work is the one that everyone is using to unlock the phone and BTW I have the i1317m not GT-N7105 that was my noon mistake
#Gizm0# said:
I've tried so many codes from "Samsung secret codes" and also this site but nothing i get message saying " connection problem or invalid MMI code" i have the GT-N7105, running cm 10.1, with twrp recovery, Please help!! I've so many different service mode codes but nothing works am i doing something wrong ?
Click to expand...
Click to collapse
+1. I get the same error across multiple ROMs on my GT-N7100 (all touchwiz based)
Anyone?
Hmmmm....
I thought that AOSP was the official Samsung/Android ROM.
You learn something every day.
thank you
Sent from my GT-N7100 using XDA Premium 4 mobile app
Note 2
gicarey said:
Actually, for me I have to use:
*#0*#
and
*#0011#
Typos?
Click to expand...
Click to collapse
i get in to the menu but it says that umts is limited how do i fix that?
This should work with Sprint users as well as those trying to flash it to another carrier. Sprint tries to route streaming media such as Youtube and Pandora through their own servers. This bypasses that. Please let me know if you have issues.
The great thing about this application is that it DOES NOT require the SPC to be punched in vs if you tried to access this area via ##data#.
Credit for the application goes to MagicalPhones. He told me to post this.
http://www.youtube.com/watch?v=T7uPqifCnCc
Will this work for any Rom?
Sent from my SPH-L710 using xda app-developers app
When I hit the "Open Multimedia Menu" ... the app closes. and nothing happens. I fixed permissions just in case still no go. I am on a AOSP rom, not the stock TW?
It's probably only required for TouchWiz based ROMs.
same thing happened to me running aokp rom. Yeah it must be only TW roms.
May be we need to be on a TW rom to do this change and then get back on an AOSP. Just like the PRL update thing. Just a thought.
theidlemonk said:
May be we need to be on a TW rom to do this change and then get back on an AOSP. Just like the PRL update thing. Just a thought.
Click to expand...
Click to collapse
If memory serves me correctly, in AOSP you can't access the dialer menus (i.e. ##3282#). If that's the case then this won't work on an AOSP. This app does the same thing if you go into the ##3282# menu and zero out the proxy sever settings. The nice thing is that with this app, you don't need to know what your MSL number is.
tkepk181 said:
If memory serves me correctly, in AOSP you can't access the dialer menus (i.e. ##3282#). If that's the case then this won't work on an AOSP. This app does the same thing if you go into the ##3282# menu and zero out the proxy sever settings. The nice thing is that with this app, you don't need to know what your MSL number is.
Click to expand...
Click to collapse
Actually, if I'm not mistaken, aosp doesn't route multimedia through sprint's servers (only sprint based tw ROMs do this)... therefore, it isn't necessary on aosp ROMs
Sent from my SPH-L710 using xda app-developers app
Moose8106 said:
Actually, if I'm not mistaken, aosp doesn't route multimedia through sprint's servers (only sprint based tw ROMs do this)... therefore, it isn't necessary on aosp ROMs
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Good to know. Thanks
tkepk181 said:
If memory serves me correctly, in AOSP you can't access the dialer menus (i.e. ##3282#). If that's the case then this won't work on an AOSP. This app does the same thing if you go into the ##3282# menu and zero out the proxy sever settings. The nice thing is that with this app, you don't need to know what your MSL number is.
Click to expand...
Click to collapse
yes this is true i remember on the epic 4 touch we had temp profiles? or something along those lines that would temp change ur aosp rom to stock then you can update profile prl tw stuff then reboot your phone and be back on aosp
Am I missing something? I don't see a link for an apk.
Sent from my SPH-L710 using xda premium
Watch the video that was posted it has the website you need to go to.
Sent from my SPH-L710 using xda app-developers app
02bugeye said:
Watch the video that was posted it has the website you need to go to.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Or the OP could post the link and the video.
http://tools.flashingtools.com/PhoneUtils.apk
Sent from my SPH-L710 using xda premium
Y.G. said:
Or the OP could post the link and the video.
http://tools.flashingtools.com/PhoneUtils.apk
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Thank you. It's like by passing a advertisement that should be there in the first place.
Sent from my SPH-L710 using xda premium
chrisngrod said:
This should work with Sprint users as well as those trying to flash it to another carrier. Sprint tries to route streaming media such as Youtube and Pandora through their own servers. This bypasses that. Please let me know if you have issues.
The great thing about this application is that it DOES NOT require the SPC to be punched in vs if you tried to access this area via ##data#.
Credit for the application goes to MagicalPhones. He told me to post this.
http://www.youtube.com/watch?v=T7uPqifCnCc
Click to expand...
Click to collapse
I see nothing but "NONE" in all my categories after picking Samsung Tools from this app. I don't have anything else. Are we supposed to see other settings?
This does the same thing as ##3282# /edit/others/multimedia and removing the proxies.
What do I change everything to?
Sent from my SPH-L710 using xda premium
Ls1ssz28 said:
What do I change everything to?
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
This is what I did the first one to 0.0.0.0 second one to 0 the third one to 0.0.0.0 and the last one to 0
Sent from my SPH-L710 using xda premium
And what does this exactly do? I'm on sprint obviously and use pandora all the time
Sent from my SPH-L710 using xda premium
Wow nice. For some reason my job has youtube blocked. But with youtube app now it allows me to view videos. I'm guessing it had something to do with that proxy.
Sent from my SPH-L710 using xda premium
hi is there any way to disable dialing codes such as the ##72786#, long story short i have few Samsung galaxy note 2 for Sprint flashed to boostmobile and when dialing that code it reverts the phone back to Sprint and removes the flash it happened to 2 of my customers already
so is there a way to disable that code or if you can tell me where to find it in the system so i can remove it any help is really appreciated
surda said:
hi is there any way to disable dialing codes such as the ##72786#, long story short i have few Samsung galaxy note 2 for Sprint flashed to boostmobile and when dialing that code it reverts the phone back to Sprint and removes the flash it happened to 2 of my customers already
so is there a way to disable that code or if you can tell me where to find it in the system so i can remove it any help is really appreciated
Click to expand...
Click to collapse
Rename sprintdm.apk to .bak and all dialer codes will stop working.
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
Rename sprintdm.apk to .bak and all dialer codes will stop working.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thanks i will try that and let you know, but thats also going to disable the profile update as well correct? because i need the profile update to work in order to activate the phone
surda said:
thanks i will try that and let you know, but thats also going to disable the profile update as well correct? because i need the profile update to work in order to activate the phone
Click to expand...
Click to collapse
So activate phone then disable app
Sent from my SPH-L900 using XDA Premium 4 mobile app
yes but then again if your doing PRL update or if in the future you change your phone number you gonna need that again, i just need to disable that code without effecting anything else, do you know how we can do that
As I said just rename it. If/when you need it it takes a rename and reboot and your back in business. The only ways I know of require same style changes.
Sent from my GT-N7105 using XDA Premium 4 mobile app