Hi guysI've Just gotten my galaxy note and I can't seem to find the dialer codes that are used to check phone information.
Back then it was*#*#4636#*#*Or something like that, has anyone figured out what are the dialer codes for our galaxy note 2?
Sent from my GT-N7105 using xda app-developers app
Frostyeo said:
Hi guysI've Just gotten my galaxy note and I can't seem to find the dialer codes that are used to check phone information.
Back then it was*#*#4636#*#*Or something like that, has anyone figured out what are the dialer codes for our galaxy note 2?
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Samsung secret codes: http://tricks-world110.blogspot.nl/2012/07/all-samsung-mobile-secret-codes.html.
Tried it out but doesn't really work, anyone else tried? Must I be rooted?
Sent from my GT-N7105 using xda app-developers app
Frostyeo said:
Tried it out but doesn't really work, anyone else tried? Must I be rooted?
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Hello sir,
You doesn't need to root your device for some code to run successfully,
Try this few code as I used it before this to check my faulty device :
#*0*# - To run some test on your device.
#*0011# - To run Service Mode. There's an option to Turn Off the Wifi Power Saver Mode
*#1234# - To check your device Version of Android.
Hope this can help sir as this is a few notable code that I used to check on device before this.
zulljoe88 said:
Hello sir,
You doesn't need to root your device for some code to run successfully,
Try this few code as I used it before this to check my faulty device :
#*0*# - To run some test on your device.
#*0011# - To run Service Mode. There's an option to Turn Off the Wifi Power Saver Mode
*#1234# - To check your device Version of Android.
Hope this can help sir as this is a few notable code that I used to check on device before this.
Click to expand...
Click to collapse
Actually, for me I have to use:
*#0*#
and
*#0011#
Typos?
No eeffing Codes work for me!!!
gicarey said:
Actually, for me I have to use:
*#0*#
and
*#0011#
Typos?
Click to expand...
Click to collapse
I've tried so many codes from "Samsung secret codes" and also this site but nothing i get message saying " connection problem or invalid MMI code" i have the GT-N7105, running cm 10.1, with twrp recovery, Please help!! I've so many different service mode codes but nothing works am i doing something wrong ?
#Gizm0# said:
I've tried so many codes from "Samsung secret codes" and also this site but nothing i get message saying " connection problem or invalid MMI code" i have the GT-N7105, running cm 10.1, with twrp recovery, Please help!! I've so many different service mode codes but nothing works am i doing something wrong ?
Click to expand...
Click to collapse
Codes for Sammy and AOSP based roms are different.
On CM10.1 *#*#4636#*#* (or something similar) will work. On Sammy based it won't.
note 2
DubelBoom said:
Codes for Sammy and AOSP based roms are different.
On CM10.1 *#*#4636#*#* (or something similar) will work. On Sammy based it won't.
Click to expand...
Click to collapse
Thank you very much for the response but that one I already know, the code that doesn't work is the one that everyone is using to unlock the phone and BTW I have the i1317m not GT-N7105 that was my noon mistake
#Gizm0# said:
I've tried so many codes from "Samsung secret codes" and also this site but nothing i get message saying " connection problem or invalid MMI code" i have the GT-N7105, running cm 10.1, with twrp recovery, Please help!! I've so many different service mode codes but nothing works am i doing something wrong ?
Click to expand...
Click to collapse
+1. I get the same error across multiple ROMs on my GT-N7100 (all touchwiz based)
Anyone?
Hmmmm....
I thought that AOSP was the official Samsung/Android ROM.
You learn something every day.
thank you
Sent from my GT-N7100 using XDA Premium 4 mobile app
Note 2
gicarey said:
Actually, for me I have to use:
*#0*#
and
*#0011#
Typos?
Click to expand...
Click to collapse
i get in to the menu but it says that umts is limited how do i fix that?
Related
Solved! Lock Code is "SPRINT"
It's been a long time asking a question in here (I'm used to answer the questions but I'm asking a question at this time )
I'm using Calk's FC18 Tweaked version and tried to do so something thru ##DEBUG#.
From the other ROMs that I used before, I need to provide the MSL code and it worked.
But in this ROM, something has been changed. System asked for 'Check Lock Code' and need to provide the different code that I don't know.
Does anyone notice this change? Do you think it's because of Sprint Hotspot hack?
Does anyone know how to get this code?
Thanks in advance for you help!
[Update]
None of code works in here (through the web surfing)
FC18 Stock ROM is same - need to provide 'lock code (not MSL)'
FC07 - same - asking lock code
yea I tried this to when I was on fc15 and it asked for a lock code I tried putting in my msl and nothing. Same thing with fc18.
Sent from my SPH-D710 using Tapatalk 2 Beta-2
I'm using AOKP, so I can't check, but there is a field for Subsidy Lock in the QPST Service Programming utility on the Settings tab.
Getting to it is similar to uploading a custom PRL. http://forum.xda-developers.com/showthread.php?t=1267893
Mattheyu said:
I'm using AOKP, so I can't check, but there is a field for Subsidy Lock in the QPST Service Programming utility on the Settings tab.
Getting to it is similar to uploading a custom PRL. http://forum.xda-developers.com/showthread.php?t=1267893
Click to expand...
Click to collapse
Thanks for posting. I've checked the link and the information loading the custom PRL. I think it's not related in here. I'm not talking about the MSL. MSL does not work in here. So far, no way to get into ##DEBUG# mode.
re
What is the exact purpose of the ##DEBUG#? bunch of options to play with and mess up haha but whats a GAIN to the ##DEBUG# ????
Changing the Mac address for 4g that's what I need it for and other stuff
Sent from my SPH-D710 using Tapatalk 2 Beta-2
Running fc15 on GB and sprint gave me my MSl for that and it worked fine.
Sent from my SPH-D710 using Tapatalk
I am having the same issue... not sure what the unlock code is.
I would say maybe its looking for your one time msl code which is different from the regular. Maybe your phone number also. I know they have a developer id in the settings. There has to be a way through terminal to gain access to the lock code
Sent from my BAD A$$ EPIC TOUCH 4G
One time MSL code does not work in here. I've already tried it. One can get the one time MSL code from QPST screen. It seems like any codes from QPST do not work.
Try 000000. Six zeros.
Sunsparc said:
Try 000000. Six zeros.
Click to expand...
Click to collapse
Any code off the internet does not work. 000000 nor 111111.....
I'm wondering if its modem related
THE ICS DEBUG LOCK CODE IS: 777468
All credits go to the original poster search google for "ics-debug-lock-code-mystery-resolved-finally"
(can't post links yet still working on my 10 posts)
(missed that it was already answered)
sorry:banghead:
Sent from my SPH-D710 using xda app-developers app
none1498 said:
THE ICS DEBUG LOCK CODE IS: 777468
All credits go to the original poster search google for "ics-debug-lock-code-mystery-resolved-finally"
(can't post links yet still working on my 10 posts)
(missed that it was already answered)
sorry:banghead:
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Holy necropost, batman!
No need to bring back a long dead post telling us something we all allready know.
Reporting for spamming to get to your 10 posts.
Sent from my SPH-D710 using xda app-developers app
I was wondering how i can find the msl code on my samsung galaxy iii phone. I know there was an app for that on the evo. I know its different with this phone if anyone knows how to obtain it please let me know thanks
sflecha35 said:
I was wondering how i can find the msl code on my samsung galaxy iii phone. I know there was an app for that on the evo. I know its different with this phone if anyone knows how to obtain it please let me know thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1745888
I have tried all methods and do not have my msl code. I own phone but not on Sprint.
Sent from my SPH-L710 using Tapatalk 2
rigel1326 said:
I have tried all methods and do not have my msl code. I own phone but not on Sprint.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Are you on a Touchwiz based ROM?
sflecha35 said:
I was wondering how i can find the msl code on my samsung galaxy iii phone. I know there was an app for that on the evo. I know its different with this phone if anyone knows how to obtain it please let me know thanks
Click to expand...
Click to collapse
Try this...go the data menu in the dialer and get to the point where you have to enter your msl. Enter 6 zero's and hit OK. The pull a logcat (you van use alogcat, free from the play store). Scan through the lines and your correct msl should be in there...it might work, but worth a shot.
Sent from my SPH-L710 using xda premium
adamdelozier said:
Try this...go the data menu in the dialer and get to the point where you have to enter your msl. Enter 6 zero's and hit OK. The pull a logcat (you van use alogcat, free from the play store). Scan through the lines and your correct msl should be in there...it might work, but worth a shot.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
All you have to do is enter 000000 in ##3282# > edit and then open terminal emu and type getprop ril.MSL and it will show the correct MSL in the next line
I like to break stuff!
-EViL-KoNCEPTz- said:
All you have to do is enter 000000 in ##3282# > edit and then open terminal emu and type getprop ril.MSL and it will show the correct MSL in the next line
I like to break stuff!
Click to expand...
Click to collapse
When I do that string command in term after entering in the dialer I get nothing back.
Sent from my SPH-L710 using Tapatalk 2
---------- Post added at 07:57 AM ---------- Previous post was at 07:56 AM ----------
Android Attack said:
Are you on a Touchwiz based ROM?
Click to expand...
Click to collapse
Yes I'm on touchwiz based.
Sent from my SPH-L710 using Tapatalk 2
Depending on the a setup the msl may not be housed in ril. Did you try searching the logcat? I am on AOSP right now otherwise i would duplicate it and give ya screenshots. But i used this procedure a few weeks ago. Hope something works for you.
Sent from my SPH-L710 using xda premium
rigel1326 said:
When I do that string command in term after entering in the dialer I get nothing back.
Sent from my SPH-L710 using Tapatalk 2
---------- Post added at 07:57 AM ---------- Previous post was at 07:56 AM ----------
Yes I'm on touchwiz based.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Do this open dialer type ##72786# select edit type 000000 let it fail hit home key, select terminal and type this (case sensitive)
getprop ril.MSL
Hit enter and then it should show a six digit code in between the first line where u typed and the new cmd prompt. It'll be squished up on the left inbetween the 2 cmd lines. It works rooted or not on all twiz roms ive tried, on the sprint s2, s3 and note 2. Another way you can get it is to either go on sprint.com and choose to activate the phone online and put in the msid when it asks and then write it down but dont continue activation or just call customer service and ask them for it 9 times out of 10 they won't even ask any questions they'll just look it up for you
I like to break stuff!
Tried everything alogcat logcat extreme. This is a Sprint SG3 just flashed over to Boost. To get mms working I need MLS. Who should I call if all else fails?
Going to downgrade rom then retry. Would it help to be in cm instead of stock tw?
Sent from my SPH-L710 using Tapatalk 2
rigel1326 said:
Tried everything alogcat logcat extreme. This is a Sprint SG3 just flashed over to Boost. To get mms working I need MLS. Who should I call if all else fails?
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Have you tried this method??
http://forum.xda-developers.com/showthread.php?t=1745888
You can also try to Open the voice dialer and say "Open APNs" and then choose "Open APNs" from the list that comes up. this is what you need to update for the mms right? the APN's? i am pretty sure you don't need the MSL using this method. Just not sure if it will work.
Also, i think you have to have USB debugging and adbshell active in your settings as well.
Trying like hell to help you here man!!
Flash this file (KIES_HOME_L710VPALEN_L710SPRALEN_618049_REV03_user_low_ship.tar) Search in google. Its Android 4.0.4.
download get my msl app from playstore. Then in the app select get my msl. once it shows error go into ##3282# and enter 000000 Then again go to get my msl app and then it will show your msl. Works perfect. Tried on 5-6 Phones.
;38378489 said:
Flash this file (KIES_HOME_L710VPALEN_L710SPRALEN_618049_REV03_user_low_ship.tar) Search in google. Its Android 4.0.4.
download get my msl app from playstore. Then in the app select get my msl. once it shows error go into ##3282# and enter 000000 Then again go to get my msl app and then it will show your msl. Works perfect. Tried on 5-6 Phones.
Click to expand...
Click to collapse
See I like an expert who really gives you the problem and solution. Thank you
ankurcshah. Downgrade rom, now the baby pops. Run commands get code.
Sent from my SPH-L710 using Tapatalk 2
rigel1326 said:
See I like an expert who really gives you the problem and solution. Thank you
ankurcshah. Downgrade rom, now the baby pops. Run commands get code.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Should see if this could be stickied! Another question that comes up all the time with 30 different options to fix. Glad this worked for ya.
Sent from my SPH-L710 using xda premium
rigel1326 said:
See I like an expert who really gives you the problem and solution. Thank you
ankurcshah. Downgrade rom, now the baby pops. Run commands get code.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
I am downloading the file as I type this, but I was wondering after you flash this file and got your MSL, did the phone auto update to the latest versions of everything automatically? I am having the same problem, my phone was flashed to Boost, but I need to fix my MMS settings. No method I have tried has been able to give me the MSL. I am on a stock root.
Here are my specs:
Android Ver: 4.1.2
Build #:jzo54k.l710vpbmb1
I just really wanna know if my phone will go back to all this after the downgrade?
(Forgive me for sounding like such a noob, I haven't dabbled in android development since my first EVO years ago)
I was trying to access some of the secret codes through the dialer and none of them are working. After typing them in it says "Connection problem or invalid MMI code"
I'm running codename with ktoonsez kernel. Any suggestions?
EDIT: I don't know if it matters, but I should also let you know that I'm with Rogers
What secret code?
Sent from my SGH-I747 using xda app-developers app
for example *#0*# in the dialer should take me to a test mode shouldn't it?
Sorry I don't know if there's an actual technical term for these codes I just always see them referred to as secret codes lol
those codes will not work on aosp based roms. which codenameandroid is. if you need to use those codes you will need to flash back to a touchwiz based rom.
ahhh i see. makes sense lol thanks!
I have got a wired problem. Somehow if i type *#06# on my Galaxy Note 2 dialer, its not responding to it. as a matter of fact, i can't run any sort code like *#0000#. My phone works fine otherwise . i mean i can see the imei from the phone status page
swagatsourav said:
I have got a wired problem. Somehow if i type *#06# on my Galaxy Note 2 dialer, its not responding to it. as a matter of fact, i can't run any sort code like *#0000#. My phone works fine otherwise . i mean i can see the imei from the phone status page
Click to expand...
Click to collapse
Can some one please give me the solution
I don't think you need the asterisk...
Sent from my HTC One S using xda app-developers app
Roundtableprez said:
I don't think you need the asterisk...
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
You do need the asterisk, its actually correct the way he has typed it. Try reboot phone and try again
Sent from the bottom of my underpants
nogotaclue said:
You do need the asterisk, its actually correct the way he has typed it. Try reboot phone and try again
Sent from the bottom of my underpants
Click to expand...
Click to collapse
I have already tried that. In fact its not just the imei , i cant enter any of the dilaer codes.
Your probably not using touchwiz rom thats why its not working AFAIK..
Tricks25 said:
Your probably not using touchwiz rom thats why its not working AFAIK..
Click to expand...
Click to collapse
I am on stock pre rooted rom.
swagatsourav said:
I am on stock pre rooted rom.
Click to expand...
Click to collapse
Is it debloated or anything? It may have had the necessary apks removed
Sent from my GT-N7100 using xda premium
D3_ said:
Is it debloated or anything? It may have had the necessary apks removed
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
i am on stock odex rom. can you point out which apk might that be
swagatsourav said:
i am on stock odex rom. can you point out which apk might that be
Click to expand...
Click to collapse
i found the solution. there is a service called factory mode. i had frozen that app. after defrosting it. things started working as normal.
Wassup guys,
I've been having a problem with my N7100 for a while, and i wanted to fix it.
So i googled the solution and found a fix, but the problem is that the fix requires to open the engineer mode, and its not opening when i dial the different codes.
Nothing is working as i have tried flashing several ROMs with no solution.
I am currently running rooted stock 4.4.2.
Cheers
You mean developer options. Go to settings - more - about device and tap on buildnumber 7 times.
Androidwizzard said:
You mean developer options. Go to settings - more - about device and tap on buildnumber 7 times.
Click to expand...
Click to collapse
I've had it on since i got the rom. Any other ideas?
GamerSam32 said:
I've had it on since i got the rom. Any other ideas?
Click to expand...
Click to collapse
Ah understood: you are searching for Samsung's secret codes like *#0*# dialer codes for calibration eg
LINK
Androidwizzard said:
Ah understood: you are searching for Samsung's secret codes like *#0*# dialer codes for calibration eg
LINK
Click to expand...
Click to collapse
No bro, my problem is that when i dial the necessary codes the engineer mode is not opening.
GamerSam32 said:
No bro, my problem is that when i dial the necessary codes the engineer mode is not opening.
Click to expand...
Click to collapse
Which codes are you try to dialing?
Sent from my GT-N7100 using XDA Premium 4 mobile app
4.3 Since the codes have changed a lot *#*#...............#*#* o *#.......#* per code, you have to put more or less *#9900# o *#0011# funcionan y *#1234#
optimusPRIME said:
Which codes are you try to dialing?
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
*#7465625# or * # * # 3646633 # * # *
Sent from my GT-N7100 using XDA Free mobile app
GamerSam32 said:
*#7465625# or * # * # 3646633 # * # *
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
I am getting this when dialed above code.
Now on stock 4.3, rooted.
Sent from my GT-N7100 using XDA Premium 4 mobile app
rimgoru said:
4.3 Since the codes have changed a lot *#*#...............#*#* o *#.......#* per code, you have to put more or less *#9900# o *#0011# funcionan y *#1234#
Click to expand...
Click to collapse
Thanks for the help but can you talk in English please?
Sent from my GT-N7100 using XDA Free mobile app
GamerSam32 said:
Thanks for the help but can you talk in English please?
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you , can you describe me how can i do this?
Above codes are not working on kitkat.look for alternative codes.
how to get engineering mode on note 2 exynous processor?