Hey guys
CSpire Wireless formerly Cellular South has finally released their Galaxy S3. The model number is SCH-L710. The reason I am asking this question here and not in a different carriers forum is the L710 in model number. I don't pretend to understand why certain carriers GS3's are labeled with different model numbers, but I thought that since your GS3 and mine both have L710 I thought that possibly the hardware was closer to the same than say verizon's which is a completely different model designation. That being said I am desperate for a custom rom but don't wanna just go flashing any GS3 roms out there to see if any will work on my network. I would feel more comfortable knowing that I had a way to odin flash a stock rom in case any problems arise. Anyway if someone is kind enough and generous enough to help me locate a stock odin flashable rom, then I would be willing to help in any way I can to find a usable rom or port for my version of this great phone.
Thank you so much in advance
I went ahead and flashed the latest CM10 nightly for the Sprint version. Everything seems to be fine, except for data. I still have data, but it is very flaky and won't hardly hold a signal. I suspect it to be the PRL or CM itself.
We definitely need a stock rom for CSpire. I am willing to help any way I can.
abcleanonme said:
I went ahead and flashed the latest CM10 nightly for the Sprint version. Everything seems to be fine, except for data. I still have data, but it is very flaky and won't hardly hold a signal. I suspect it to be the PRL or CM itself.
We definitely need a stock rom for CSpire. I am willing to help any way I can.
Click to expand...
Click to collapse
find the proper PRL for C Spire and use this method (http://forum.xda-developers.com/showthread.php?t=1880781) to flash it
nicholaaaas said:
find the proper PRL for C Spire and use this method (http://forum.xda-developers.com/showthread.php?t=1880781) to flash it
Click to expand...
Click to collapse
Good luck finding that. Cspire keeps things like that unattainable. Unless *228 will work properly to update prl. Should anyone come across it please let me know. Bout to flash CM10
What about using QPST or something to pull the PRL off of a stock device? Can we get someone to do this before flashing any ROMs?
Okay. First of all, I didn't think to look at the PRL before I went and flashed the Sprint CM10. But now it says 20005. I restored my nandroid backup and pulled this PRL from my phone with QPST 2.7.374. In DFS Tool, I noticed there was a CSpire PRL 10009. I wrote this PRL to the Phone and am getting much better service on the stock TW ROM.
HOWEVER, I flashed the Sprint CM10 again and the same thing happened. It says PRL 10009, but there is little to no service and when it does have a little service, it is very flaky and eventually ends up with no data connection at all. Any more suggestions or ideas?
abcleanonme said:
What about using QPST or something to pull the PRL off of a stock device? Can we get someone to do this before flashing any ROMs?
Click to expand...
Click to collapse
after a few hours of trying to get my phone into diagnostic mode i found this that worked. *#22745927 then enable hidden menu then *#7284#
now i think i need to find a newer version of qpst so that it will recognize my phone.
This one worked for me: https://www.dropbox.com/s/tcfsxo5d6vsxfnn/QPST.2.7.374.rar
abcleanonme said:
This one worked for me: https://www.dropbox.com/s/tcfsxo5d6vsxfnn/QPST.2.7.374.rar
Click to expand...
Click to collapse
while i try to get qpst to read my phone can you please upload a copy of our prl and link it please
abcleanonme said:
This one worked for me: https://www.dropbox.com/s/tcfsxo5d6vsxfnn/QPST.2.7.374.rar
Click to expand...
Click to collapse
pm me please
here are some useful links i found.
http://androidforums.com/lg-optimus-m/419514-how-get-prl-off-your-phone.html
http://www.s3forums.com/forum/galaxy-s3-hacking-mods/1614-backup-qpst-backup-your-nv-data-imei-us-variants.html
abcleanonme said:
here are some useful links i found.
http://androidforums.com/lg-optimus-m/419514-how-get-prl-off-your-phone.html
http://www.s3forums.com/forum/galaxy-s3-hacking-mods/1614-backup-qpst-backup-your-nv-data-imei-us-variants.html
Click to expand...
Click to collapse
qpst still says no phone under the phone column no matter what i try
So far, this is what I have done:
First I used the following tool to download drivers for my phone and root ( via option 4 in the program).
http://forum.xda-developers.com/showthread.php?t=1746680
I used CWM to make a nandroid backup.
Next, I flashed the latest CM nightly for the Sprint version here:
http://get.cm/?device=d2spr
After doing this, everything worked fine, EXCEPT for data. I dialed *228 and let it do its thing. I actually had data, but the signal was extremely weak and very flaky. After messing with settings it would usually drop it altogether.
I restored my nandroid backup and noticed that although I had data, it seemed to be weaker than before ( although that may just be me).
I decided to follow the following guide on how to get the PRL from the phone:
http://androidforums.com/lg-optimus-m/419514-how-get-prl-off-your-phone.html
The version of QPST on that post was outdated, so I found and used QPST 2.7.374, which I posted a link to earlier in the thread.
I managed to copy the 20005 PRL off of my phone and saved it.
I then started up DFS Tool and wrote the CSpire 10009 PRL to my phone.
I get much better service on the stock ROM, but the Sprint CM builds still do the same thing. No data.
UPDATE: I did a *228 to get back on the 20005 PRL and it is working just as well as the 10009 PRL now.
Also, as OBSt4l0n discovered, there's simultaneous voice and data. Not sure if anyone else has noticed this or if this was happening before flashing roms
and PRL's.
Okay. We no longer believe it's the PRL causing the problems. More info to come. May be slower over the weekend with weekend stuff and all.
Sent from my SCH-L710 using xda premium
abcleanonme said:
Okay. We no longer believe it's the PRL causing the problems. More info to come. May be slower over the weekend with weekend stuff and all.
Sent from my SCH-L710 using xda premium
Click to expand...
Click to collapse
Thanks for the update. I thought everybody had long abandoned trying to port a rom to the cspire gs3 lol.
bone39367 said:
Thanks for the update. I thought everybody had long abandoned trying to port a rom to the cspire gs3 lol.
Click to expand...
Click to collapse
Out of curiosity, Could it be the APN's causing the issues? And from what I've seen the vzw variant seems closer to the cspire. but its hard to say. Just to try and eliminate possible causes, I would reccomend flashing this here and see if you get the same issues. http://goo-inside.me/devs/aokp/d2vzw/aokp_d2vzw_jb_build-4.zip Its AOKP for the vzw variant. I have used it as my daily driver for the past week and I'm on Sprint. Dont have to change anything in it, just flash.
Just my 2 cents
billard412 said:
Out of curiosity, Could it be the APN's causing the issues? And from what I've seen the vzw variant seems closer to the cspire. but its hard to say. Just to try and eliminate possible causes, I would reccomend flashing this here and see if you get the same issues. Its AOKP for the vzw variant. I have used it as my daily driver for the past week and I'm on Sprint. Dont have to change anything in it, just flash.
Just my 2 cents
Click to expand...
Click to collapse
Thanks. I'm tempted to try this but the only problem is I don't have a way of going back to stock. I did, however make a backup through cwm but I wish there was an absolute stock cspire rom out there. I would love to test out developer's roms and provide feedback if somebody knows where I could get a stock rom to flash for cspire's gs3....
bone39367 said:
Thanks. I'm tempted to try this but the only problem is I don't have a way of going back to stock. I did, however make a backup through cwm but I wish there was an absolute stock cspire rom out there. I would love to test out developer's roms and provide feedback if somebody knows where I could get a stock rom to flash for cspire's gs3....
Click to expand...
Click to collapse
I've been trying to find out.... without success.....
billard412 said:
Out of curiosity, Could it be the APN's causing the issues? And from what I've seen the vzw variant seems closer to the cspire. but its hard to say. Just to try and eliminate possible causes, I would reccomend flashing this here and see if you get the same issues. http://goo-inside.me/devs/aokp/d2vzw/aokp_d2vzw_jb_build-4.zip Its AOKP for the vzw variant. I have used it as my daily driver for the past week and I'm on Sprint. Dont have to change anything in it, just flash.
Just my 2 cents
Click to expand...
Click to collapse
Just tried this and still no data. We need a dev to look into this. Apparently there is something internal in code stopping our radio from functioning properly. I have attempted to pull my RIL file and insert it in cm10 then rebooting and no luck. Still no data. Any devs out there willing to look into this for us?
Sent from my SCH-L710 using xda app-developers app
Bump ****
Related
Hey guys. I've been doing a bit of searching and have only been confused! I have an Evo4G from Sprint and I want to flash it over to be used on either Alltel or Cricket.
I say Alltel or Cricket, because from what i've been reading, there are alot of problems switching these phones to alltel..So i'm looking for suggestions from you guys as far as which to flash. Either will be fine, I just want whichever will work best.
Also, I have found a lot of information about PRL's..But i'm still confused as how to flash to one of these services. The phone is already rooted and running ICS (4.0.3)
So please guys, any information will be greatly appreciated! I'm doing this for a friend and was suppose to have it done by tomorrow, but i've been having so much trouble. I've never done anything like this on a CDMA network. I can normally unlock a phone and pop a sim card into it. I know from reading that I will have to flash some alltel files to it..I'm just having issues finding the correct files and a working guide.
Oh and in case location matters, (if i'm not mistaken other carriers own alltel in certain areas,) i'm in Western North Carolina
Here is the guide I use. http://forum.xda-developers.com/showthread.php?t=934417
You will use qspt to flash the prl to your phone. You will need to be on a Sense 1.0 rom, or a Sense rom that has ##codes working.
As for MMS, I have never been able to get it to work, with new apns, gosms or any other way that's on the net. However I did find a solution that costs $5, and it works. Lemme see if I can find it again.
Thanks. I'm going to try it now.
Interesting........I'll have to check that guide out
PsilliCoder said:
Thanks. I'm going to try it now.
Click to expand...
Click to collapse
check your pm's
It says to use the Jiminy rom but when I go to the page to download it, it says it's obsolete all over the page...Should I go ahead and use it? Or is there another one that will work?
PsilliCoder said:
It says to use the Jiminy rom but when I go to the page to download it, it says it's obsolete all over the page...Should I go ahead and use it? Or is there another one that will work?
Click to expand...
Click to collapse
you can use pretty much any modern Sense rom. Sense 3.0 and below seem to be best with getting MMS to work. Haven't made it work with Sense 3.5+ or any AOSP roms yet.
Hope I dont get flamed for this but i guess getting flammed on the internet is better then messing up my girlfriend's phone . I have a Sprint GS3 and all the ROMs on the forums over there are made specifically for Sprint phones. I'm just curious as to how it works having AT&T, Rogers, Bell ect. in the same forum? Do all ROMs work for all carriers in this forum? Should I only be flashing ATT ROMs? Im nervous to have her flash something and mess her phone up...I just did the no trip root method and bumped her up to Jellybean. I'm glad y'all finally got some JB love over here! Any tips or advice on what not to do would be appreciated.
Thanks
Edit: Also see people having issues with loosing their IMEI...how are people doing this? Looks like its mainly from installing custom ROMs... Looks like you can back up your IMEI, but what are these people doing to have this happen to them because I'd like to avoid that also...
really...nothing?
pizzlewizzle said:
really...nothing?
Click to expand...
Click to collapse
nope only flash sprint ones. i heard that tmo ones work with att. but other then that you gotta flash your own model
amzi said:
nope only flash sprint ones. i heard that tmo ones work with att. but other then that you gotta flash your own model
Click to expand...
Click to collapse
No i understand that... My girlfriend has an AT&T GS3 that i just rooted for her. I was wondering if theres anything i have to worry about flashing Rogers or other carriers listed in this sections development forums? I've read something about changing APN's and other stuff that is foreign to me being on Sprint.
if it's in this section, you're most likely safe to flash it.
as for the 0 IMEI bug/glitch/thing... that's just a random thing, there's really no way to know if it'll happen the next time you flash a ROM. you just have to take precautions. backup your IMEI. if you flash your first ROM, and your IMEI is there, try to stick with that ROM.
mrhomiec said:
if it's in this section, you're most likely safe to flash it.
as for the 0 IMEI bug/glitch/thing... that's just a random thing, there's really no way to know if it'll happen the next time you flash a ROM. you just have to take precautions. backup your IMEI. if you flash your first ROM, and your IMEI is there, try to stick with that ROM.
Click to expand...
Click to collapse
Appreciate the response. Damn... so now every time you flash a ROM you need to not only make a nandroid but also back up your IMEI? also... i don't have an ATT GS3 in front of me...How hard is it to change your APN settings? I heard you need to mess with that sometimes if you're having LTE issues. We don't have an option like that on our phone
Sent from my SPH-L710 using xda app-developers app
once you backup your IMEI, it's backed up. just don't lose your backup. so make a backup of your backup.
as for APN settings, that varies as well. it all depends on ROM, location, signal, provider, etc. but it's rather straight forward. go to your network settings, and you'll see a menu for APN. you don't need an ATT phone to see it.
mrhomiec said:
once you backup your IMEI, it's backed up. just don't lose your backup. so make a backup of your backup.
as for APN settings, that varies as well. it all depends on ROM, location, signal, provider, etc. but it's rather straight forward. go to your network settings, and you'll see a menu for APN. you don't need an ATT phone to see it.
Click to expand...
Click to collapse
How important is having a backup of the IMEI i havent lost it and ive been flashing back and forth?
---------- Post added at 07:21 PM ---------- Previous post was at 07:17 PM ----------
pizzlewizzle said:
Hope I dont get flamed for this but i guess getting flammed on the internet is better then messing up my girlfriend's phone . I have a Sprint GS3 and all the ROMs on the forums over there are made specifically for Sprint phones. I'm just curious as to how it works having AT&T, Rogers, Bell ect. in the same forum? Do all ROMs work for all carriers in this forum? Should I only be flashing ATT ROMs? Im nervous to have her flash something and mess her phone up...I just did the no trip root method and bumped her up to Jellybean. I'm glad y'all finally got some JB love over here! Any tips or advice on what not to do would be appreciated.
Thanks
Edit: Also see people having issues with loosing their IMEI...how are people doing this? Looks like its mainly from installing custom ROMs... Looks like you can back up your IMEI, but what are these people doing to have this happen to them because I'd like to avoid that also...
Click to expand...
Click to collapse
Sorry didnt understand your question...
Yea hardware on i747 and i747m are the same therefore you can flash the same roms on each device. All you have to do is flash the correct modem and fix the apns for your carrier att, telus etc
First of all I would like to say this is my first post and I am feeling very optimistic as I have seen all the great things you guys have done over here! I understand in order to solve my problem I will have to be as detailed as I can, but please bare with me as I am a noob to this stuff and seem to have run into some trouble
Okay so I got a new S3 Last week and wanted to try it out on some new custom roms, I flashed it to CM 10.1 nightly using the roms downloaded via GooManager, all was fine and I had no problems until i flashed to a newer version of the nightly build and lost my signal, it always said Emergency calls only.
This happened to me once before but I solved it by flashing a modem file via Odin, since then I had to preform full system reset as I was considering selling my phone, it didn't come to that and now I am back to square one and once again I have no signal.
I have tried flashing the same modem file as I did before with no effect this time round
I have since tried many different modems and completely forgot which one has worked in the past. I have no back up files what so ever so I need to know what it is that is causing it not to get a signal. Could it be the kernel I am using? or is there a pacific modem for my ROM which I need.
I understand this is my own fault and stupidity, you guys are my last hope, I have also tried stock firmware which also has no signal.
It is an international i9300 with UK T-Mobile.
Please help me save my phone!
I hope you didn't flash a Tmobiles modem, because international gs3 and SGH-T999 aren't similar I believe other than looking the same. And more than likely you've lost your IMEI. Please goto settings and check your IMEI. Please do not post it, just verify if it's 0 or a 16 digit string.
Sent from my Nexus 7 grouper running Clean ROM 4.0 (4.3 stock rooted) owned by an MSMC diamond camo try hard.
Welcome to the forum! Albeit not quite the right one.
You need to post this in the international forum. This is for the US/Canadian models only. They are very different from yours, and not many people here will know much about it.
Do not flash anything you find here! It is highly likely to brick your phone. If you flashed our modems. Consider yourself lucky and now you know why it isn't working. Check with the guys in the other forum for your next step though.
I wish you luck!
Sent from my SGH-T999 using xda premium
Danny123173 said:
First of all I would like to say this is my first post and I am feeling very optimistic as I have seen all the great things you guys have done over here! I understand in order to solve my problem I will have to be as detailed as I can, but please bare with me as I am a noob to this stuff and seem to have run into some trouble
Okay so I got a new S3 Last week and wanted to try it out on some new custom roms, I flashed it to CM 10.1 nightly using the roms downloaded via GooManager, all was fine and I had no problems until i flashed to a newer version of the nightly build and lost my signal, it always said Emergency calls only.
This happened to me once before but I solved it by flashing a modem file via Odin, since then I had to preform full system reset as I was considering selling my phone, it didn't come to that and now I am back to square one and once again I have no signal.
I have tried flashing the same modem file as I did before with no effect this time round
I have since tried many different modems and completely forgot which one has worked in the past. I have no back up files what so ever so I need to know what it is that is causing it not to get a signal. Could it be the kernel I am using? or is there a pacific modem for my ROM which I need.
I understand this is my own fault and stupidity, you guys are my last hope, I have also tried stock firmware which also has no signal.
It is an international i9300 with UK T-Mobile.
Please help me save my phone!
Click to expand...
Click to collapse
As stated, incorrect forum. I'd give you the proper link if I was at a computer. But thank you for the detailed panic free post. It's seriously appreciated.
You're going to end up having to flash the modem that's for your phone, or maybe Odin stock.
You are right I have no imie number just a 16 digit string :/ sorry guys for posting in the wrong arearly next time I will make sure I will post correctly.
I am strating to get concerned, is this an easy fix? I dont mind wiping any data or using a certain Rom I just don't know which modem to use, some modems show me my bars but it still wont get any service. This one currently just shows a circle and cross icon with no bars at all. I am running stock.
Sent from my GT-I9300 using xda app-developers app
Also if someone could post a link to the correct forum so I know where to head that would be great. Thanks for the help guys!!
Sent from my GT-I9300 using xda app-developers app
Solved! Thanks again guys!!
DocHoliday77 said:
Welcome to the forum! Albeit not quite the right one.
You need to post this in the international forum. This is for the US/Canadian models only. They are very different from yours, and not many people here will know much about it.
Do not flash anything you find here! It is highly likely to brick your phone. If you flashed our modems. Consider yourself lucky and now you know why it isn't working. Check with the guys in the other forum for your next step though.
I wish you luck!
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I apologise thank you for the link, if I run into anymore trouble I will post to the correct section. I am glad to inform you I have solved the issue. It turns out I installed a bad modem which actually changes the file type of type of the efs folder. Causing roms to not reading it properly.
http://forum.xda-developers.com/showthread.php?t=2377731
I fixed the issue by installing a stock firmware found on this post...
http://50.23.216.69-static.reverse.softlayer.com/showthread.php?t=1646610
This firmware carries a modem file which can read the modified efs folder, and in result restoring my IMEI Number and signal even after I flashed the rom to CM 10.1.
I hope some one else can stumble on to this and it helps them, please be aware though I have an intervention Galaxy s3 and this may not work in the states or other parts of the world.
Thanks again massive help, its people like you that make this the best source of information on the internet!
Once again really sorry about posting in the wrong forums, I will try not let it happen again in the future!
Danny123173 said:
I apologise thank you for the link, if I run into anymore trouble I will post to the correct section. I am glad to inform you I have solved the issue. It turns out I installed a bad modem which actually changes the file type of type of the efs folder. Causing roms to not reading it properly.
http://forum.xda-developers.com/showthread.php?t=2377731
I fixed the issue by installing a stock firmware found on this post...
http://50.23.216.69-static.reverse.softlayer.com/showthread.php?t=1646610
This firmware carries a modem file which can read the modified efs folder, and in result restoring my IMEI Number and signal even after I flashed the rom to CM 10.1.
I hope some one else can stumble on to this and it helps them, please be aware though I have an intervention Galaxy s3 and this may not work in the states or other parts of the world.
Thanks again massive help, its people like you that make this the best source of information on the internet!
Once again really sorry about posting in the wrong forums, I will try not let it happen again in the future!
Click to expand...
Click to collapse
Congrats, I'm glad you rectified the problem! Remember for next time, when you're not able to access data or you're stuck at 2G that your IMEI has most likely went! For future reference, I recommend making an EFS backup. We've all been there before and we know the scare!
And btw, welcome to XDA, enjoy the stay lol.
Yeah I have double backed up and thanks for the tip I will keep that in mind thanks again dude!
Sent from my GT-I9300 using xda app-developers app
I ran into the same problem before, had to install stock modem to get my signal working again.
You should refer to this thread which will help you backup your efs: http://forum.xda-developers.com/showthread.php?t=2298104
I ran into the same problem after flashing a custom rom I lost my signal and imei not fixed yet
Ra2fet said:
I ran into the same problem after flashing a custom rom I lost my signal and imei not fixed yet
Click to expand...
Click to collapse
If you want help, we need more info, starting with what Rom, exactly, did you flash.
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
If you want help, we need more info, starting with what Rom, exactly, did you flash.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Yesterday I flashed S4 Revolution v8.0 [ROM][4.3 MJ9] then I lost my signal and imei and the baseband version is empty although I wipe my cash and data before flashing this rom.
I don't think that's a Rom we have for our device, unless I overlooked it.
Googled it and came up as an I9300 Rom. If this is what you flashed consider yourself extraordinarily lucky it's not hard bricked!
Odin flash the firmware for your model only! Hopefully that fixes it.....
And NEVER flash a Rom not for your model device.
Sent from my SGH-T999 using Tapatalk
I have recently acquired a Sprint SGS3 SPH-L710. It was still original stock at 4.4.2, never rooted. i flashed the n2j stock rom through odin, and then I had it flashed from Sprint to PagePlus and it is working okay (still need to get 3g going) Then used cm-autoroot and installed twrp (debating on installing philz). Now the phone is ready for some rom action.
My question is since this phone is a d2spr, but flashed to PagePlus (Verizon), would it be safe or better to install a d2vzn rom vs d2spr rom?
From my research, there are settings in the roms that are molded to a specific carrier. If I am on Verizon, I do not want to install and have Sprint related settings (buildprop?) and apps, etc. Then flashing a Sprint SGS3 to Pageplus vs a Verizon SGS3, Sprint must be set to NV only, and other posts and forums (on xda and howards), I have read said this nv setting could be changed when flashing a rom, which would break the PagePlus flash. But if I install a d2vzw rom, everything else would be molded to Verizon, which is great since I am using a Verizon network. I suppose it depends on how much molding is being done and what exactly. Then of course, I do not want to brick the device flashing the wrong version. If the roms were only listed as d2lte, I wouldnt mind as much, but I have noticed some roms do have a Sprint version and a Verizon version, but I can not locate the details to compare the differences.
Answer from another post:
bthorne79 said:
I would still stick with what your phone is if d2spr flash the d2spr here is a thread that looks like some stuff you will want to try prl apns mms
http://forums.androidcentral.com/sp...te-3-page-plus-selectel-flashing-real-3g.html
Flashing a d2vzw build will not trick the phone to think it is a vzw phone just more chances of you ending up with a brick.
Sent from my SGH-T999 using XDA Free mobile app
Click to expand...
Click to collapse
I am now having a problem updating the APN in any 5.x rom, says not enough permissions. I tried a handful of APN apps on Google play, made them system apps, etc. it never saves or changes the apn settings. I can change and save APN in KK roms just fine though.
Did you try on WiFi it could be cause not picking up data connection
This is why I stopped flashing cdma phones to alternate carriers I had a epic4g on cricket pita if I didn't have the apn fix
Sent from my SGH-T999 using Tapatalk
bthorne79 said:
This is why I stopped flashing cdma phones to alternate carriers I had a epic4g on cricket pita if I didn't have the apn fix
Click to expand...
Click to collapse
I hear you and agree 100% with flashing to alternate carriers. I would not normally do this myself, but considering I got this cell for free a couple weeks ago, I figured I might as well deal with the hassle and make the best of it.
The only problem is that I still haven't found a 100% fix. I been flashing 4.4.x roms and 5.1.1 roms trying various APN settings, apps, changes, tips, etc. Nothing seems to stick or crash when attempting to change it. Trust me I been digging all over Google, XDA, and other various droid forums.
My carrier is PagePlus/vzw, and I can not find a PagePlus APN flashable file, hmm maybe I can come across a generic Vzw one, otherwise I know the settings to put in to create a new one though. This is why I was inquirying on flashing a Verizon S3 rom in the first place. Hopefully I can come across something soon.
When I get off work I'll try to help you out
Sent from my SGH-T999 using Tapatalk
I'm doing some testing and other stuff and I need the baseband and modem in a flaahable zip format for use with twrp should I screw up. Can anyone plz help? I have the g920p and ill be testing the g920t roms. Just came back to sprint this week for service hehehe...... so I'm looking to get some potential new ROMs for our devices either by port or whatever.
Sorry if this is not the place for these kinda questions but I'm an impatient bastard and I don't have time to scope the web for a proper placement for these questions, wth all respect. please and thanks for the help.
I've gotten the tmo roms to boot however...
However I need the baseband for our s6 to have service and,the like.....can someone, anyone get me a twrp or flashfire flashable baseband for OCF or OE2? I've looked and looked and can't find a thing. I've tested a couple tmo roms and yes They boot up and all is well, except no signal, no baseband or anything of that nature. In my past flaahing adventures, I know flashing a baseband will at times fix,the lack there of. Help me plz and thankyou.
this.guy.lol said:
However I need the baseband for our s6 to have service and,the like.....can someone, anyone get me a twrp or flashfire flashable baseband for OCF or OE2? I've looked and looked and can't find a thing. I've tested a couple tmo roms and yes They boot up and all is well, except no signal, no baseband or anything of that nature. In my past flaahing adventures, I know flashing a baseband will at times fix,the lack there of. Help me plz and thankyou.
Click to expand...
Click to collapse
Wouldn't this be a kernel or rom issue? Generally, custom roms don't touch the baseband, only carrier OTAs.
Its a modem/baseband issue. It says,unknown baseband and all that stuff and the other radio like stuff is gone also. I believe a,baseband being flashed would resolve this issue. Everything else works like a charm.
this.guy.lol said:
Its a modem/baseband issue. It says,unknown baseband and all that stuff and the other radio like stuff is gone also. I believe a,baseband being flashed would resolve this issue. Everything else works like a charm.
Click to expand...
Click to collapse
So you're flashing GSM ROMs...for a CDMA device...it's not a baseband issue...it's a ROM/kernel issue...
Sent from my SM-G920P using Tapatalk
Well I'm flashing every kind of rom. I REALLY,would just like the damn base and/modem please. I'm flashing all roms and the baseband and imei is broken on GSM on the cdma only the baseband is broken. This request of mine shouldn't be a matter of interrogation....more a matter of helping someone out who would like yo experiment and possibly find a way to run any rom on our devices. Be its cdma or GSM more or less the g920f as its global the the g920v/I/k roms or whatever is cdma.
No no sir that isn't what I'm seeking.....I require the modem so I can experiment with other roms. I need the modem.bin or the modem. I need this desperately. I don't mean to be rude but this should be simple to acquire from a well known and well experienced dev or someone like a dev. Can you or someone please help?
http://www.sammobile.com/firmwares/database/SM-G920P/
Sent from my SM-G920P using Tapatalk
Djvoleur, i too have a sprint s6 thats gsm unlocked and ive tried plenty of stock/rooted kernels for our device with tmobile, att, verizon, sprint s6 edge, and even international cooked roms . Most of them boot when using your kernel . Theyll work with vkernel or unikernel, but as he was saying, although he was rude, the baseband is always unknown. No signal, sometimes you wont even see a X for no signal. Do you have any ideas i could try ? Ive got plenty sprint s6 phones to try this on and not worried about a brick. I know the risks. I titanium backup restore my personal phone nearly 3 times a week to figure this out. Not enough people bounce ideas off one another in this forum
Have you tried a note 5 rom? I would assume the issues from a note Sprint note one wouldn't be the same as the connectivity settings would be the same. The issue would probably be more of a hardware/programming problem. At this point, I think it would be an easier port since our device isn't as similar to the international device as we once thought it could be.
Never tried note 5 rom . I dont think that'd work without a port of device drivers n such