[Q] Galaxy S3 - No Signal After Flash - T-Mobile, Samsung Galaxy SIII

First of all I would like to say this is my first post and I am feeling very optimistic as I have seen all the great things you guys have done over here! I understand in order to solve my problem I will have to be as detailed as I can, but please bare with me as I am a noob to this stuff and seem to have run into some trouble
Okay so I got a new S3 Last week and wanted to try it out on some new custom roms, I flashed it to CM 10.1 nightly using the roms downloaded via GooManager, all was fine and I had no problems until i flashed to a newer version of the nightly build and lost my signal, it always said Emergency calls only.
This happened to me once before but I solved it by flashing a modem file via Odin, since then I had to preform full system reset as I was considering selling my phone, it didn't come to that and now I am back to square one and once again I have no signal.
I have tried flashing the same modem file as I did before with no effect this time round
I have since tried many different modems and completely forgot which one has worked in the past. I have no back up files what so ever so I need to know what it is that is causing it not to get a signal. Could it be the kernel I am using? or is there a pacific modem for my ROM which I need.
I understand this is my own fault and stupidity, you guys are my last hope, I have also tried stock firmware which also has no signal.
It is an international i9300 with UK T-Mobile.
Please help me save my phone!

I hope you didn't flash a Tmobiles modem, because international gs3 and SGH-T999 aren't similar I believe other than looking the same. And more than likely you've lost your IMEI. Please goto settings and check your IMEI. Please do not post it, just verify if it's 0 or a 16 digit string.
Sent from my Nexus 7 grouper running Clean ROM 4.0 (4.3 stock rooted) owned by an MSMC diamond camo try hard.

Welcome to the forum! Albeit not quite the right one.
You need to post this in the international forum. This is for the US/Canadian models only. They are very different from yours, and not many people here will know much about it.
Do not flash anything you find here! It is highly likely to brick your phone. If you flashed our modems. Consider yourself lucky and now you know why it isn't working. Check with the guys in the other forum for your next step though.
I wish you luck!
Sent from my SGH-T999 using xda premium

Danny123173 said:
First of all I would like to say this is my first post and I am feeling very optimistic as I have seen all the great things you guys have done over here! I understand in order to solve my problem I will have to be as detailed as I can, but please bare with me as I am a noob to this stuff and seem to have run into some trouble
Okay so I got a new S3 Last week and wanted to try it out on some new custom roms, I flashed it to CM 10.1 nightly using the roms downloaded via GooManager, all was fine and I had no problems until i flashed to a newer version of the nightly build and lost my signal, it always said Emergency calls only.
This happened to me once before but I solved it by flashing a modem file via Odin, since then I had to preform full system reset as I was considering selling my phone, it didn't come to that and now I am back to square one and once again I have no signal.
I have tried flashing the same modem file as I did before with no effect this time round
I have since tried many different modems and completely forgot which one has worked in the past. I have no back up files what so ever so I need to know what it is that is causing it not to get a signal. Could it be the kernel I am using? or is there a pacific modem for my ROM which I need.
I understand this is my own fault and stupidity, you guys are my last hope, I have also tried stock firmware which also has no signal.
It is an international i9300 with UK T-Mobile.
Please help me save my phone!
Click to expand...
Click to collapse
As stated, incorrect forum. I'd give you the proper link if I was at a computer. But thank you for the detailed panic free post. It's seriously appreciated.
You're going to end up having to flash the modem that's for your phone, or maybe Odin stock.

You are right I have no imie number just a 16 digit string :/ sorry guys for posting in the wrong arearly next time I will make sure I will post correctly.
I am strating to get concerned, is this an easy fix? I dont mind wiping any data or using a certain Rom I just don't know which modem to use, some modems show me my bars but it still wont get any service. This one currently just shows a circle and cross icon with no bars at all. I am running stock.
Sent from my GT-I9300 using xda app-developers app

Also if someone could post a link to the correct forum so I know where to head that would be great. Thanks for the help guys!!
Sent from my GT-I9300 using xda app-developers app

Solved! Thanks again guys!!
DocHoliday77 said:
Welcome to the forum! Albeit not quite the right one.
You need to post this in the international forum. This is for the US/Canadian models only. They are very different from yours, and not many people here will know much about it.
Do not flash anything you find here! It is highly likely to brick your phone. If you flashed our modems. Consider yourself lucky and now you know why it isn't working. Check with the guys in the other forum for your next step though.
I wish you luck!
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I apologise thank you for the link, if I run into anymore trouble I will post to the correct section. I am glad to inform you I have solved the issue. It turns out I installed a bad modem which actually changes the file type of type of the efs folder. Causing roms to not reading it properly.
http://forum.xda-developers.com/showthread.php?t=2377731
I fixed the issue by installing a stock firmware found on this post...
http://50.23.216.69-static.reverse.softlayer.com/showthread.php?t=1646610
This firmware carries a modem file which can read the modified efs folder, and in result restoring my IMEI Number and signal even after I flashed the rom to CM 10.1.
I hope some one else can stumble on to this and it helps them, please be aware though I have an intervention Galaxy s3 and this may not work in the states or other parts of the world.
Thanks again massive help, its people like you that make this the best source of information on the internet!
Once again really sorry about posting in the wrong forums, I will try not let it happen again in the future!

Danny123173 said:
I apologise thank you for the link, if I run into anymore trouble I will post to the correct section. I am glad to inform you I have solved the issue. It turns out I installed a bad modem which actually changes the file type of type of the efs folder. Causing roms to not reading it properly.
http://forum.xda-developers.com/showthread.php?t=2377731
I fixed the issue by installing a stock firmware found on this post...
http://50.23.216.69-static.reverse.softlayer.com/showthread.php?t=1646610
This firmware carries a modem file which can read the modified efs folder, and in result restoring my IMEI Number and signal even after I flashed the rom to CM 10.1.
I hope some one else can stumble on to this and it helps them, please be aware though I have an intervention Galaxy s3 and this may not work in the states or other parts of the world.
Thanks again massive help, its people like you that make this the best source of information on the internet!
Once again really sorry about posting in the wrong forums, I will try not let it happen again in the future!
Click to expand...
Click to collapse
Congrats, I'm glad you rectified the problem! Remember for next time, when you're not able to access data or you're stuck at 2G that your IMEI has most likely went! For future reference, I recommend making an EFS backup. We've all been there before and we know the scare!
And btw, welcome to XDA, enjoy the stay lol.

Yeah I have double backed up and thanks for the tip I will keep that in mind thanks again dude!
Sent from my GT-I9300 using xda app-developers app

I ran into the same problem before, had to install stock modem to get my signal working again.
You should refer to this thread which will help you backup your efs: http://forum.xda-developers.com/showthread.php?t=2298104

I ran into the same problem after flashing a custom rom I lost my signal and imei not fixed yet

Ra2fet said:
I ran into the same problem after flashing a custom rom I lost my signal and imei not fixed yet
Click to expand...
Click to collapse
If you want help, we need more info, starting with what Rom, exactly, did you flash.
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
If you want help, we need more info, starting with what Rom, exactly, did you flash.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Yesterday I flashed S4 Revolution v8.0 [ROM][4.3 MJ9] then I lost my signal and imei and the baseband version is empty although I wipe my cash and data before flashing this rom.

I don't think that's a Rom we have for our device, unless I overlooked it.
Googled it and came up as an I9300 Rom. If this is what you flashed consider yourself extraordinarily lucky it's not hard bricked!
Odin flash the firmware for your model only! Hopefully that fixes it.....
And NEVER flash a Rom not for your model device.
Sent from my SGH-T999 using Tapatalk

Related

[Q] CSpire GS3 SCH-L710 rom???

Hey guys
CSpire Wireless formerly Cellular South has finally released their Galaxy S3. The model number is SCH-L710. The reason I am asking this question here and not in a different carriers forum is the L710 in model number. I don't pretend to understand why certain carriers GS3's are labeled with different model numbers, but I thought that since your GS3 and mine both have L710 I thought that possibly the hardware was closer to the same than say verizon's which is a completely different model designation. That being said I am desperate for a custom rom but don't wanna just go flashing any GS3 roms out there to see if any will work on my network. I would feel more comfortable knowing that I had a way to odin flash a stock rom in case any problems arise. Anyway if someone is kind enough and generous enough to help me locate a stock odin flashable rom, then I would be willing to help in any way I can to find a usable rom or port for my version of this great phone.
Thank you so much in advance
I went ahead and flashed the latest CM10 nightly for the Sprint version. Everything seems to be fine, except for data. I still have data, but it is very flaky and won't hardly hold a signal. I suspect it to be the PRL or CM itself.
We definitely need a stock rom for CSpire. I am willing to help any way I can.
abcleanonme said:
I went ahead and flashed the latest CM10 nightly for the Sprint version. Everything seems to be fine, except for data. I still have data, but it is very flaky and won't hardly hold a signal. I suspect it to be the PRL or CM itself.
We definitely need a stock rom for CSpire. I am willing to help any way I can.
Click to expand...
Click to collapse
find the proper PRL for C Spire and use this method (http://forum.xda-developers.com/showthread.php?t=1880781) to flash it
nicholaaaas said:
find the proper PRL for C Spire and use this method (http://forum.xda-developers.com/showthread.php?t=1880781) to flash it
Click to expand...
Click to collapse
Good luck finding that. Cspire keeps things like that unattainable. Unless *228 will work properly to update prl. Should anyone come across it please let me know. Bout to flash CM10
What about using QPST or something to pull the PRL off of a stock device? Can we get someone to do this before flashing any ROMs?
Okay. First of all, I didn't think to look at the PRL before I went and flashed the Sprint CM10. But now it says 20005. I restored my nandroid backup and pulled this PRL from my phone with QPST 2.7.374. In DFS Tool, I noticed there was a CSpire PRL 10009. I wrote this PRL to the Phone and am getting much better service on the stock TW ROM.
HOWEVER, I flashed the Sprint CM10 again and the same thing happened. It says PRL 10009, but there is little to no service and when it does have a little service, it is very flaky and eventually ends up with no data connection at all. Any more suggestions or ideas?
abcleanonme said:
What about using QPST or something to pull the PRL off of a stock device? Can we get someone to do this before flashing any ROMs?
Click to expand...
Click to collapse
after a few hours of trying to get my phone into diagnostic mode i found this that worked. *#22745927 then enable hidden menu then *#7284#
now i think i need to find a newer version of qpst so that it will recognize my phone.
This one worked for me: https://www.dropbox.com/s/tcfsxo5d6vsxfnn/QPST.2.7.374.rar
abcleanonme said:
This one worked for me: https://www.dropbox.com/s/tcfsxo5d6vsxfnn/QPST.2.7.374.rar
Click to expand...
Click to collapse
while i try to get qpst to read my phone can you please upload a copy of our prl and link it please
abcleanonme said:
This one worked for me: https://www.dropbox.com/s/tcfsxo5d6vsxfnn/QPST.2.7.374.rar
Click to expand...
Click to collapse
pm me please
here are some useful links i found.
http://androidforums.com/lg-optimus-m/419514-how-get-prl-off-your-phone.html
http://www.s3forums.com/forum/galaxy-s3-hacking-mods/1614-backup-qpst-backup-your-nv-data-imei-us-variants.html
abcleanonme said:
here are some useful links i found.
http://androidforums.com/lg-optimus-m/419514-how-get-prl-off-your-phone.html
http://www.s3forums.com/forum/galaxy-s3-hacking-mods/1614-backup-qpst-backup-your-nv-data-imei-us-variants.html
Click to expand...
Click to collapse
qpst still says no phone under the phone column no matter what i try
So far, this is what I have done:
First I used the following tool to download drivers for my phone and root ( via option 4 in the program).
http://forum.xda-developers.com/showthread.php?t=1746680
I used CWM to make a nandroid backup.
Next, I flashed the latest CM nightly for the Sprint version here:
http://get.cm/?device=d2spr
After doing this, everything worked fine, EXCEPT for data. I dialed *228 and let it do its thing. I actually had data, but the signal was extremely weak and very flaky. After messing with settings it would usually drop it altogether.
I restored my nandroid backup and noticed that although I had data, it seemed to be weaker than before ( although that may just be me).
I decided to follow the following guide on how to get the PRL from the phone:
http://androidforums.com/lg-optimus-m/419514-how-get-prl-off-your-phone.html
The version of QPST on that post was outdated, so I found and used QPST 2.7.374, which I posted a link to earlier in the thread.
I managed to copy the 20005 PRL off of my phone and saved it.
I then started up DFS Tool and wrote the CSpire 10009 PRL to my phone.
I get much better service on the stock ROM, but the Sprint CM builds still do the same thing. No data.
UPDATE: I did a *228 to get back on the 20005 PRL and it is working just as well as the 10009 PRL now.
Also, as OBSt4l0n discovered, there's simultaneous voice and data. Not sure if anyone else has noticed this or if this was happening before flashing roms
and PRL's.
Okay. We no longer believe it's the PRL causing the problems. More info to come. May be slower over the weekend with weekend stuff and all.
Sent from my SCH-L710 using xda premium
abcleanonme said:
Okay. We no longer believe it's the PRL causing the problems. More info to come. May be slower over the weekend with weekend stuff and all.
Sent from my SCH-L710 using xda premium
Click to expand...
Click to collapse
Thanks for the update. I thought everybody had long abandoned trying to port a rom to the cspire gs3 lol.
bone39367 said:
Thanks for the update. I thought everybody had long abandoned trying to port a rom to the cspire gs3 lol.
Click to expand...
Click to collapse
Out of curiosity, Could it be the APN's causing the issues? And from what I've seen the vzw variant seems closer to the cspire. but its hard to say. Just to try and eliminate possible causes, I would reccomend flashing this here and see if you get the same issues. http://goo-inside.me/devs/aokp/d2vzw/aokp_d2vzw_jb_build-4.zip Its AOKP for the vzw variant. I have used it as my daily driver for the past week and I'm on Sprint. Dont have to change anything in it, just flash.
Just my 2 cents
billard412 said:
Out of curiosity, Could it be the APN's causing the issues? And from what I've seen the vzw variant seems closer to the cspire. but its hard to say. Just to try and eliminate possible causes, I would reccomend flashing this here and see if you get the same issues. Its AOKP for the vzw variant. I have used it as my daily driver for the past week and I'm on Sprint. Dont have to change anything in it, just flash.
Just my 2 cents
Click to expand...
Click to collapse
Thanks. I'm tempted to try this but the only problem is I don't have a way of going back to stock. I did, however make a backup through cwm but I wish there was an absolute stock cspire rom out there. I would love to test out developer's roms and provide feedback if somebody knows where I could get a stock rom to flash for cspire's gs3....
bone39367 said:
Thanks. I'm tempted to try this but the only problem is I don't have a way of going back to stock. I did, however make a backup through cwm but I wish there was an absolute stock cspire rom out there. I would love to test out developer's roms and provide feedback if somebody knows where I could get a stock rom to flash for cspire's gs3....
Click to expand...
Click to collapse
I've been trying to find out.... without success.....
billard412 said:
Out of curiosity, Could it be the APN's causing the issues? And from what I've seen the vzw variant seems closer to the cspire. but its hard to say. Just to try and eliminate possible causes, I would reccomend flashing this here and see if you get the same issues. http://goo-inside.me/devs/aokp/d2vzw/aokp_d2vzw_jb_build-4.zip Its AOKP for the vzw variant. I have used it as my daily driver for the past week and I'm on Sprint. Dont have to change anything in it, just flash.
Just my 2 cents
Click to expand...
Click to collapse
Just tried this and still no data. We need a dev to look into this. Apparently there is something internal in code stopping our radio from functioning properly. I have attempted to pull my RIL file and insert it in cm10 then rebooting and no luck. Still no data. Any devs out there willing to look into this for us?
Sent from my SCH-L710 using xda app-developers app
Bump ****

[Q] [HELP] Soft Bricked i9505

I rooted my GS4 yesterday and had no issues at all until i tried to flash a MOD to obtain wireless hotspot, but what i didnt notice was the MOD was for a Sprint version GS4. I know know if thats exactly what made my phone brick but im pretty positive because it was during the reboot that the phone got stuck on the TMO screen and apparently remaining soft-bricked. I spent the rest of the night and all of today reading and researching how to fix it myself before coming here to ask for help, so please bare with me.
I have already attempted to flash the official stock firmware using Odin, but it displays an error everytime saying it failed and something about AUTH. Sorry if im sounding vague, i am on a back up phone to use the internet and forgot to right down the exact message.. Anywho, i tried wiping everything and redoing the process and i even tried to flash the appropiate PIT file that i found but it still displays an error and says failed because of some AUTH or SEC problem.
Ive been at this diligently for almost 12 hours. My brain is filled with all these suggestions and methods that i have tried to use to restore my phone back to factory, but none of them have worked. I can still get into recovery and all that, so im assuming that there is still good chance i could fix the problem?
Also i am starting to get myself more and more confused about whether the firmware i downloaded is the right one i need for my phone, it seemed so at first but now i see theres TONS of region codes that can determine the firmware version?
Sorry if im all over the place, but i just dont know which step to take next..
I appreciate any help that is given, and im even willing to pay (some) bucks or maybe even (btc) for someone to walk me through what i need to do or what im doing wrong.
Thanks in Advance
Have you followed every single thing in the return to stock thread? Including updating your drivers, using the USB cable that came with your phone, running Odin as admin, etc?
Toleraen said:
Have you followed every single thing in the return to stock thread? Including updating your drivers, using the USB cable that came with your phone, running Odin as admin, etc?
Click to expand...
Click to collapse
No i havent tried that threads strategy, although i have done the same exact steps but only difference i see is that the firmware file name is:
M919UVUAMDL
While the one i was trying to use earlier was:
I9505XXUAMDM
This is where im getting very confused because i cant find a cut and dry way of knowing which firmware is the correct one..
koolbreez12 said:
No i havent tried that threads strategy, although i have done the same exact steps but only difference i see is that the firmware file name is:
M919UVUAMDL
While the one i was trying to use earlier was:
I9505XXUAMDM
This is where im getting very confused because i cant find a cut and dry way of knowing which firmware is the correct one..
Click to expand...
Click to collapse
You do have the T-Mobile SGS4, correct? Any files with I9505 in the name are for the international version, which is what you flashed (not the right file). All of ours will mention SGH-M919, M919, or jfltetmo in the file name. Pull the one in the thread I linked above and push that.
Crossing your fingers while doing so couldn't hurt...
Edit: I'd recommend using the "Download UVUAMDL Official TAR" in that thread as well, not the "stock tar (original)", since the MDL is official.
Toleraen said:
You do have the T-Mobile SGS4, correct? Any files with I9505 in the name are for the international version, which is what you flashed (not the right file). All of ours will mention SGH-M919, M919, or jfltetmo in the file name. Pull the one in the thread I linked above and push that.
Crossing your fingers while doing so couldn't hurt...
Edit: I'd recommend using the "Download UVUAMDL Official TAR" in that thread as well, not the "stock tar (original)", since the MDL is official.
Click to expand...
Click to collapse
Thanks so much, i feel stupid for not realizing the difference between the two haha. Im d/l the firmware from the thread you referenced as we speak so i definitely will keep my fingers crossed and let you know how it turns out!
Thanks again. Im not sure how to give a thanks on here or credit for you help but your help is definitely appreciated.
error post
If you can get into download mode i would suggest flashing stock with that then rerooting that way the program downloads all of the nessacary stuff on its own.
koolbreez12 said:
Thanks so much, i feel stupid for not realizing the difference between the two haha. Im d/l the firmware from the thread you referenced as we speak so i definitely will keep my fingers crossed and let you know how it turns out!
Thanks again. Im not sure how to give a thanks on here or credit for you help but your help is definitely appreciated.
Click to expand...
Click to collapse
Welcome!
Sent from my SGH-M919 using xda premium

Service issues/RUU

What's up XDA.
I posting here on behalf of my sister, who owns this phone. I actually have a One S (great phone btw ). Anyways she's been having some issues with her data connection. There's literally zero connection all the time. I noticed her APN's were gone and it wouldn't let me add them back, so i flashed Avatar ROM from Paranoid Android and they were missing again, but came back after a reboot. I wanted to run an RUU. The problem is, I cant find one anywhere. Links to an RUU or suggestions to get this straitened out would be greatly appreciated
Shes running the Avatar ROM right now.
PS: Even after selecting the APN, her service just wont come back. A guide on running the RUU would be appreciated too
If you've changed from anything other than another 4.2.x rom (as I believe avatar is) you'll have to flash a radio as well. UVMC6 or TLMC4 are the ones for 4.2.x ROMs.
http://forum.xda-developers.com/showthread.php?t=1895400
clubkevin11 said:
What's up XDA.
I posting here on behalf of my sister, who owns this phone. I actually have a One S (great phone btw ). Anyways she's been having some issues with her data connection. There's literally zero connection all the time. I noticed her APN's were gone and it wouldn't let me add them back, so i flashed Avatar ROM from Paranoid Android and they were missing again, but came back after a reboot. I wanted to run an RUU. The problem is, I cant find one anywhere. Links to an RUU or suggestions to get this straitened out would be greatly appreciated
Shes running the Avatar ROM right now.
PS: Even after selecting the APN, her service just wont come back. A guide on running the RUU would be appreciated too
Click to expand...
Click to collapse
Don't get mistaken! RUUs as far as I know are only for HTC devices.
And yes, you need to flash a newer radio for the new 4.2.2 ROMs.
Hope I helped
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
thanks a lot you guys, fixed the issue :laugh:
clubkevin11 said:
thanks a lot you guys, fixed the issue :laugh:
Click to expand...
Click to collapse
Glad to hear!
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Odd problem. ..

First off, I'm not new to rooting etc. I've previously rooted several HTC devices and achieved s-off which for those ofyou who know HTC phones, know that the process can be difficult.
That being said, I've recently switched to my very first Samsung device and have achieved root with no problems, but was unable to flash any roms. After searching for a week and coming up empty handed, I decided I'd try the all in one toolbox. I downloaded it and when checking my build number, I discovered what my problem likely is.
My phone is with telus and is the 1747M.
How have I managed to get that build number? Can I change the build easily enough? Should I leave it on that build and just use roms meant for the i9300?
Thanks in advance for your help!!
Sent from my SGH-I747M using xda app-developers app
DO NOT USE i9300!! If it is a carrier device (i747[M]), which it is, you will brick your phone and have to get it JTAGGED. You need to only flash ROMs located in this section.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
ChandraKoo said:
First off, I'm not new to rooting etc. I've previously rooted several HTC devices and achieved s-off which for those ofyou who know HTC phones, know that the process can be difficult.
That being said, I've recently switched to my very first Samsung device and have achieved root with no problems, but was unable to flash any roms. After searching for a week and coming up empty handed, I decided I'd try the all in one toolbox. I downloaded it and when checking my build number, I discovered what my problem likely is.
My phone is with telus and is the 1747M.
How have I managed to get that build number? Can I change the build easily enough? Should I leave it on that build and just use roms meant for the i9300?
Thanks in advance for your help!!
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
Please start by reading this thread, reading that thread will help you understand Rooting and installing Roms. Reading that thread will save you from Bricking your phone, as you would have done if you'd flashed a i9300 Rom onto your phone.
Sticky Roll-Up A Guide To All Guides and Q&A's
I've read all of that stuff and the answer to my question isn't there. My build number is the same as listed in i9300. I wasn't going to flash any of those roms without finding out if that was the solution to my problem. I don't want to brick my phone and therefor I stopped doing anything to it until I was able to get some help on how to proceed. I only discovered the build number issue when I tried to use the all in one toolkit and noticed my build number didn't match any of the telus ones but the 9300 ones. I guess I'll just have to continue researching on my own to figure it out. I wouldn't have posted if I wasn't stuck. Thanks anyways
ChandraKoo said:
I've read all of that stuff and the answer to my question isn't there. My build number is the same as listed in i9300. I wasn't going to flash any of those roms without finding out if that was the solution to my problem. I don't want to brick my phone and therefor I stopped doing anything to it until I was able to get some help on how to proceed. I only discovered the build number issue when I tried to use the all in one toolkit and noticed my build number didn't match any of the telus ones but the 9300 ones. I guess I'll just have to continue researching on my own to figure it out. I wouldn't have posted if I wasn't stuck. Thanks anyways
Click to expand...
Click to collapse
Don't pay attention to build number.
Flash with Odin a pre rooted i747M image. (That's the easiest way)
Do not and I mean DO NOT flash,use,mod anything i9300 or anything international.
Please read some more. A lot more.
Before you end up with a paper weight.
And stay away from anything i9xxx
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

[Q] HELP, NEED OE2 or OCF baseband

I'm doing some testing and other stuff and I need the baseband and modem in a flaahable zip format for use with twrp should I screw up. Can anyone plz help? I have the g920p and ill be testing the g920t roms. Just came back to sprint this week for service hehehe...... so I'm looking to get some potential new ROMs for our devices either by port or whatever.
Sorry if this is not the place for these kinda questions but I'm an impatient bastard and I don't have time to scope the web for a proper placement for these questions, wth all respect. please and thanks for the help.
I've gotten the tmo roms to boot however...
However I need the baseband for our s6 to have service and,the like.....can someone, anyone get me a twrp or flashfire flashable baseband for OCF or OE2? I've looked and looked and can't find a thing. I've tested a couple tmo roms and yes They boot up and all is well, except no signal, no baseband or anything of that nature. In my past flaahing adventures, I know flashing a baseband will at times fix,the lack there of. Help me plz and thankyou.
this.guy.lol said:
However I need the baseband for our s6 to have service and,the like.....can someone, anyone get me a twrp or flashfire flashable baseband for OCF or OE2? I've looked and looked and can't find a thing. I've tested a couple tmo roms and yes They boot up and all is well, except no signal, no baseband or anything of that nature. In my past flaahing adventures, I know flashing a baseband will at times fix,the lack there of. Help me plz and thankyou.
Click to expand...
Click to collapse
Wouldn't this be a kernel or rom issue? Generally, custom roms don't touch the baseband, only carrier OTAs.
Its a modem/baseband issue. It says,unknown baseband and all that stuff and the other radio like stuff is gone also. I believe a,baseband being flashed would resolve this issue. Everything else works like a charm.
this.guy.lol said:
Its a modem/baseband issue. It says,unknown baseband and all that stuff and the other radio like stuff is gone also. I believe a,baseband being flashed would resolve this issue. Everything else works like a charm.
Click to expand...
Click to collapse
So you're flashing GSM ROMs...for a CDMA device...it's not a baseband issue...it's a ROM/kernel issue...
Sent from my SM-G920P using Tapatalk
Well I'm flashing every kind of rom. I REALLY,would just like the damn base and/modem please. I'm flashing all roms and the baseband and imei is broken on GSM on the cdma only the baseband is broken. This request of mine shouldn't be a matter of interrogation....more a matter of helping someone out who would like yo experiment and possibly find a way to run any rom on our devices. Be its cdma or GSM more or less the g920f as its global the the g920v/I/k roms or whatever is cdma.
No no sir that isn't what I'm seeking.....I require the modem so I can experiment with other roms. I need the modem.bin or the modem. I need this desperately. I don't mean to be rude but this should be simple to acquire from a well known and well experienced dev or someone like a dev. Can you or someone please help?
http://www.sammobile.com/firmwares/database/SM-G920P/
Sent from my SM-G920P using Tapatalk
Djvoleur, i too have a sprint s6 thats gsm unlocked and ive tried plenty of stock/rooted kernels for our device with tmobile, att, verizon, sprint s6 edge, and even international cooked roms . Most of them boot when using your kernel . Theyll work with vkernel or unikernel, but as he was saying, although he was rude, the baseband is always unknown. No signal, sometimes you wont even see a X for no signal. Do you have any ideas i could try ? Ive got plenty sprint s6 phones to try this on and not worried about a brick. I know the risks. I titanium backup restore my personal phone nearly 3 times a week to figure this out. Not enough people bounce ideas off one another in this forum
Have you tried a note 5 rom? I would assume the issues from a note Sprint note one wouldn't be the same as the connectivity settings would be the same. The issue would probably be more of a hardware/programming problem. At this point, I think it would be an easier port since our device isn't as similar to the international device as we once thought it could be.
Never tried note 5 rom . I dont think that'd work without a port of device drivers n such

Categories

Resources