[Q] Help with Hboot - Desire HD Q&A, Help & Troubleshooting

Hey,
A month ago i tried to use the ace hack kit on my Desire HD and I seemingly screwed it up.
I came back to it to try and see what was possible.
After trawling through tons of forum posts I found:
- When my SD card is in the volume buttons do not work, nor does power.
- The above is the same even when using the only other microSD card i have.
- I put the PD98IMG.zip on my other SD card and booted in HBOOT, it proceeded to work and gave me a CID error.
- Tried to make micro SD card a "gold card" but can't due to only being able to access HBOOT.
- Went HBOOT > Recovery > Vol Up + Power > Wipe cache and clear data > Install of Micro SD > Doesn't work and just restarts.
- I am concerned the S-ON may be a big issue here, i did try RUU (i think its that, from htcdev, but didn't work since the version was incorrect)
When i come into HBOOT this appears:
ACE PVT SHIP S-ON RL
HBOOT-0.85.0024
MICROP-0438
RADIO-26.09.04.11_M2
eMMC-boot
Apr 12 2011,00:55:45
Below this is how buttons work and options of which are; Fastboot, Recovery, Factory Reset, Simlock, Image CRC.
Any help would be much appreciated so that I can stop using this old bashed around Nokia E63.
I am more than happy to provide any information you guys can think of, just tell me how to obtain it please.
Thanks!

Iribela said:
Hey,
A month ago i tried to use the ace hack kit on my Desire HD and I seemingly screwed it up.
I came back to it to try and see what was possible.
After trawling through tons of forum posts I found:
- When my SD card is in the volume buttons do not work, nor does power.
- The above is the same even when using the only other microSD card i have.
- I put the PD98IMG.zip on my other SD card and booted in HBOOT, it proceeded to work and gave me a CID error.
- Tried to make micro SD card a "gold card" but can't due to only being able to access HBOOT.
- Went HBOOT > Recovery > Vol Up + Power > Wipe cache and clear data > Install of Micro SD > Doesn't work and just restarts.
- I am concerned the S-ON may be a big issue here, i did try RUU (i think its that, from htcdev, but didn't work since the version was incorrect)
When i come into HBOOT this appears:
ACE PVT SHIP S-ON RL
HBOOT-0.85.0024
MICROP-0438
RADIO-26.09.04.11_M2
eMMC-boot
Apr 12 2011,00:55:45
Below this is how buttons work and options of which are; Fastboot, Recovery, Factory Reset, Simlock, Image CRC.
Any help would be much appreciated so that I can stop using this old bashed around Nokia E63.
I am more than happy to provide any information you guys can think of, just tell me how to obtain it please.
Thanks!
Click to expand...
Click to collapse
Your sdcard is corrupted to work as a gold card, that is why you get freezed in hboot. Get a new or different sdcard and then try flashing a ruu again.
Sent from my GT-N7000 using xda app-developers app

glevitan said:
Your sdcard is corrupted to work as a gold card, that is why you get freezed in hboot. Get a new or different sdcard and then try flashing a ruu again.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Yea i tried this and this does not work because as i said "i did try RUU (i think its that, from htcdev, but didn't work since the version was incorrect)"
i.imgur.com/QaVV3(dot)png
Getting past the HBOOT no matter the SD card for me is done by just putting sd card in the split second after i see its entering HBOOT, this works and it does recognise it (Because i said I put the PD98IMG.zip on my other SD card and booted in HBOOT, it proceeded to work and gave me a CID error.")
Thanks,
Iribela.

Iribela said:
Yea i tried this and this does not work because as i said "i did try RUU (i think its that, from htcdev, but didn't work since the version was incorrect)"
i.imgur.com/QaVV3(dot)png
Getting past the HBOOT no matter the SD card for me is done by just putting sd card in the split second after i see its entering HBOOT, this works and it does recognise it (Because i said I put the PD98IMG.zip on my other SD card and booted in HBOOT, it proceeded to work and gave me a CID error.")
Thanks,
Iribela.
Click to expand...
Click to collapse
You have to find a RUU from your carrier. Do the following, in a cmd session in the PC with the phone plugged in fastboot usb type: fastboot getvar all and then find the INFOcidnum and of course the INFOmain. With that information we can search for a RUU that works.

glevitan said:
You have to find a RUU from your carrier. Do the following, in a cmd session in the PC with the phone plugged in fastboot usb type: fastboot getvar all and then find the INFOcidnum and of course the INFOmain. With that information we can search for a RUU that works.
Click to expand...
Click to collapse
INFOcidnum: VODAP021
INFOversion-main: 1.31.405.6

Iribela said:
INFOcidnum: VODAP021
INFOversion-main: 1.31.405.6
Click to expand...
Click to collapse
I guess that I have a RUU that might help. Just let me check and I will send a PM (private message) :good:
Edit: There´s no RUU for that CID, but you can make a goldcard and flash an unbranded ROM. Do you know how to do that?

glevitan said:
I guess that I have a RUU that might help. Just let me check and I will send a PM (private message) :good:
Edit: There´s no RUU for that CID, but you can make a goldcard and flash an unbranded ROM. Do you know how to do that?
Click to expand...
Click to collapse
I read a few things on that, but i couldn't seem to get it to work. Help would be appreciated .
EDIT: I tried to make one but cant get CID, nothing worked and i looked for ages to try get it.
Thanks

Iribela said:
I read a few things on that, but i couldn't seem to get it to work. Help would be appreciated .
Thanks
Click to expand...
Click to collapse
Iribela, if you give me a couple hours we can manage to get connected via Teamviewer and I will lend you a hand. You will need a working android phone to make the goldcard. Here you have a tutorial on how that is done: http://www.addictivetips.com/mobile/how-to-easily-create-gold-card-for-htc-desire-without-hex-editing/
The goldcard tool can be downloaded from here: http://dl.dropbox.com/u/30674730/GoldCardTool_0.0.7.zip
I can lend you a hand on patching the sdcard. But I need you to get a working phone, so we can get adb working.
Teamviewer involves me taking control of your PC for a while to do the job...if that is ok with you.

So can i get my friend to give me a CID since he is on same carrier, my android phone won't work i can only get into HBOOT.
Once i get that CID i can manage, really appreciate the help.

Iribela said:
So can i get my friend to give me a CID since he is on same carrier, my android phone won't work i can only get into HBOOT.
Once i get that CID i can manage, really appreciate the help.
Click to expand...
Click to collapse
the CID you are getting in the goldcard tool is from the sdcard, not from your phone. That is how you patch your sdcard to convert it to a goldcard. If you are not sure just wait for me. That is why you need a working phone but with your sdcard (or the sdcard you are going to use to flash the RUU)

glevitan said:
the CID you are getting in the goldcard tool is from the sdcard, not from your phone. That is how you patch your sdcard to convert it to a goldcard. If you are not sure just wait for me. That is why you need a working phone but with your sdcard (or the sdcard you are going to use to flash the RUU)
Click to expand...
Click to collapse
Okay if you can pm how to go about getting it then that would be sick, i have to sleep now. I live in sydney australia (GMT+10) if u need to look at timezones.
appreciated,
iribela.

Iribela said:
Okay if you can pm how to go about getting it then that would be sick, i have to sleep now. I live in sydney australia (GMT+10) if u need to look at timezones.
appreciated,
iribela.
Click to expand...
Click to collapse
ok. Go to bed and as soon as I am free I will send a PM. Time zones suck for this kind of stuff...

FIXED IT WOOO.
Thanks, after hearing that CID was card specific i remembered sister has an android so used that to make a gold card and it worked

Iribela said:
FIXED IT WOOO.
Thanks, after hearing that CID was card specific i remembered sister has an android so used that to make a gold card and it worked
Click to expand...
Click to collapse
Glad you made it....enjoy. :cyclops:

Related

UNABLE TO BOOT TO RECOVERY/ S-ON /STUCKED ON HTC LOGO WHITE SCREEN (Please HELP!)

Hi,
I don't really know where to start and have no idea what actually causes the issue, please just bare with me guys as I badly need your help.
Here's the thing;
My Phone was rooted way back using unrevoked method (as far as I remember)
> Radio was upgraded to the latest (afaik)
> I have created a cheap generic GoldCard with Ext2 & 3 which is kind of slow and so I decided to try different kinds of Custom ROM.
> I recently installed GingerVillain (GingerBread2.3.4).
> I enabled apps to sd for protected apps using the Terminal I downloaded from Market.
> I was on the process of moving apps to sd (including those when it suddenly started bootlooping. After 4x of loops, I decided to remove the battery. From there I know something went wrong.
> I normally would just go to clockwork recovery and do the reinstallation process in rectifying such issue, but to my surprise I was not able to boot into recovery as well and stucked in Fastboot & Hboot and if I try to boot normally, then it will be up to HTC logo only.
> I also noticed that security flag was turned on (S-ON) wherein it was turned off when I bought it and still Off after I rooted using unrevoked method.
> When I checked the SD it was corrupted already and had to format & repartition it using Ubuntu's Gparted Partition Utility. (I bought a new one as a replacement but was unable to make it a GoldCard as it probably requires that it is inside your phone and running in OS)
>> Did some research for few days and here's what I've tried so far. <<
- Tried to use AlphaRev to turn off the security but was unsuccessful since it requires that you have to be inside the OS (ROM) which is not possible at the moment.
- Tried to use RUU to just unroot it and get back to zero but still unsuccessful, it encountered USB Connection Error....many times.
- Tried getting the rom.zip inside RUU and renaming it to PB99IMG.zip, loaded it using hboot but still unsuccessful, it says CID Incorrect! Update Fail.
- I read that downgrading Hboot would most likely resolve the issue but I really have no idea how to do it, no clear steps are roaming out there upon doing my research.
- Some says, you can push the ClockWork using ADB but doing it actually fails....Error....and no clear steps.
I don't really know what kind of issue(s) I am facing now guys.
I am totally on the edge of my seat.
I must have been missing something along the way...(I know I am)
If somebody would be helpful enough to point & show the way in resolving this issue, that would be greatly appreciated (step by step maybe).
These are the details in my Hboot UI that would hopefully helps (if that will make sense).
BRAVO PVT3 SHIP S-ON
HBOOT-0.83.0001
MICROP-051d
RADIO-5.17.05.08
Jun 10 2010, 12:12:05
THANK YOU SO MUCH IN ADVANCE GUYS.
GOD BLESS YOU ALL.
{UPDATE......ISSUE HAS BEEN RESOLVED...Read my post down....}
If you do not have a goldcard you must find an RUU specifically for your phone. I'm on Vodafone UK and it appears there are a couple of Vod UK RUUs out there but only one of them would flash correctly. The others left me in a state like yours.
Persevere I believe all is not lost.
Check this thread out and see if that helps. http://forum.xda-developers.com/showthread.php?t=831734&highlight=un+bricking+an+slcd+desire
victorvital said:
Hi,
I don't really know where to start and have no idea what actually causes the issue, please just bare with me guys as I badly need your help.
Here's the thing;
My Phone was rooted way back using unrevoked method (as far as I remember)
> Radio was upgraded to the latest (afaik)
> I have created a cheap generic GoldCard with Ext2 & 3 which is kind of slow and so I decided to try different kinds of Custom ROM.
> I recently installed GingerVillain (GingerBread2.3.4).
> I enabled apps to sd for protected apps using the Terminal I downloaded from Market.
> I was on the process of moving apps to sd (including those when it suddenly started bootlooping. After 4x of loops, I decided to remove the battery. From there I know something went wrong.
> I normally would just go to clockwork recovery and do the reinstallation process in rectifying such issue, but to my surprise I was not able to boot into recovery as well and stucked in Fastboot & Hboot and if I try to boot normally, then it will be up to HTC logo only.
> I also noticed that security flag was turned on (S-ON) wherein it was turned off when I bought it and still Off after I rooted using unrevoked method.
> When I checked the SD it was corrupted already and had to format & repartition it using Ubuntu's Gparted Partition Utility. (I bought a new one as a replacement but was unable to make it a GoldCard as it probably requires that it is inside your phone and running in OS)
>> Did some research for few days and here's what I've tried so far. <<
- Tried to use AlphaRev to turn off the security but was unsuccessful since it requires that you have to be inside the OS (ROM) which is not possible at the moment.
- Tried to use RUU to just unroot it and get back to zero but still unsuccessful, it encountered USB Connection Error....many times.
- Tried getting the rom.zip inside RUU and renaming it to PB99IMG.zip, loaded it using hboot but still unsuccessful, it says CID Incorrect! Update Fail.
- I read that downgrading Hboot would most likely resolve the issue but I really have no idea how to do it, no clear steps are roaming out there upon doing my research.
- Some says, you can push the ClockWork using ADB but doing it actually fails....Error....and no clear steps.
I don't really know what kind of issue(s) I am facing now guys.
I am totally on the edge of my seat.
I must have been missing something along the way...(I know I am)
If somebody would be helpful enough to point & show the way in resolving this issue, that would be greatly appreciated (step by step maybe).
These are the details in my Hboot UI that would hopefully helps (if that will make sense).
BRAVO PVT3 SHIP S-ON
HBOOT-0.83.0001
MICROP-051d
RADIO-5.17.05.08
Jun 10 2010, 12:12:05
THANK YOU SO MUCH IN ADVANCE GUYS.
GOD BLESS YOU ALL.
Click to expand...
Click to collapse
Remove your sd card and unplug battery.... It will start in recovery mode. Then then your recovering and it says no sd. Reinstall sd..
Sent from my Inspire 4G using XDA Premium App
SeanyC said:
If you do not have a goldcard you must find an RUU specifically for your phone. I'm on Vodafone UK and it appears there are a couple of Vod UK RUUs out there but only one of them would flash correctly. The others left me in a state like yours.
Persevere I believe all is not lost.
Check this thread out and see if that helps. http://forum.xda-developers.com/showthread.php?t=831734&highlight=un+bricking+an+slcd+desire
Click to expand...
Click to collapse
The link somehow helps me....
After how many days of troubleshooting...was finally able to get my phone back in it's working condition...
Thank you all guys.
victorvital said:
The link somehow helps me....
After how many days of troubleshooting...was finally able to get my phone back in it's working condition...
Thank you all guys.
Click to expand...
Click to collapse
plz can u help or suggest me how to do that..i m also stuck like u for 3 month....i got same probs like u....
BRAVO PVT4 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.09.05.30_2
Aug 10 2010, 17:52:18
jgm092 said:
plz can u help or suggest me how to do that..i m also stuck like u for 3 month....i got same probs like u....
BRAVO PVT4 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.09.05.30_2
Aug 10 2010, 17:52:18
Click to expand...
Click to collapse
Just need to go to church for a whole day activity.....will do the steps afterwards.
Just hang in there buddy...
jgm092 said:
plz can u help or suggest me how to do that..i m also stuck like u for 3 month....i got same probs like u....
BRAVO PVT4 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.09.05.30_2
Aug 10 2010, 17:52:18
Click to expand...
Click to collapse
So Sorry for the long delay...been busy and Sick these past days...
Ok here goes.
The steps will be assuming that we have "Exactly" the same issue so if ever along the way you think that something might have gone different then I suggest you discontinue following the steps as you might end up with a Totally Bricked Desire. (which I am not liable of )
Credits to the people who created ALL steps I have copied and pasted in here!
Here's what I did in my case;
(**Make sure your unit is totally charged up)
Step 1:
Downgrade Hboot & Unroot (restore shipped ROM) your device;
- Get the latest RUU for your region (make sure it is for your region) from Shipped Roms. (remember to check the md5 sum, we don't want to download a corrupted file )
- Run the RUU as administrator.
- When it gets to the portion of asking you to plugged in the device,, click Start and type %temp% in the search box, it will come up with a folder named Temp,,Open it.
- Using the search bar (again) in the temp folder that we just opened, type in rom.zip when you see rom.zip, move it to desktop or anywhere you like, then you can cancel the opened RUU process.
- Create GoldCard (other threads doesn't suggest to use a GoldCard YET as the ROM will run even without a GoldCard, but in my case...Ordinary SD Card doesn't work for me at all leaving me in creating a GoldCard). Format the SD Card to FAT32 afterwards.
- Rename the rom.zip to PB99IMG.zip
- Copy it to the SD Card root
- Boot to Hboot (Vol- plus Power)
- Hboot will then detect the zip and will load it up, Wait for few minutes and grab a cup of coffee .
- When it finds PB99IMG.zip, it starts to load it;
It gives the next options after few minutes from the initial key press of Vol- and Power key.
Parsing………………….[SD zip]
1. Bootloader
2. Radio V2
3. Radio_Cust
4. Boot
5. Recovery
6. System
7. Userdata
8. Splash1
9. Splash2
Do you want to update device?
<Vol Up> Yes
<Vol Down> No
and so we would want to choose Yes
During the Process, it will reboot and will reload PB99IMG.zip again and will continue with its process....if ever you got stucked into HTC screen again after it reboots during the process, you can pretty much remove the battery then boot to Hboot again and it will continue with its thing.
If it asks for a reboot, choose Yes.
If you pressed Yes, then:
Update is in progress..
Do not power off your device.
1. Bootloader -OK
2. Radio V2 -OK
3. Radio_Cust -OK
4. Boot -OK
5. Recovery-Unzipping/Updating
6. System
7. Userdata
8. Splash1
9. Splash2
If it asks for a reboot again, choose Yes.
On rebooting, HTC screen shows up for a few seconds.
Then a green Down arrow in a green circle shows up for another 5-6 seconds.
Then, HTC screen again.
Finally, HTC screen disappears and the HTC Quietly brilliant logo shows.
Your device now boots into the Android phone.
DONE with Step 1...your phone is now unrooted, Hboot downgraded and is back into its Shipped State.
**If you encountered error during the initial loading of PB99IMG then chances are the ROM you downloaded might not be the one for your device, remember that the ROM vary from region to region so you must make sure you have downloaded the right one....
Step 2:
S-Off your device
- AlphaRev will guide you here
**no need to NANDROID since you don't have anything to...
**This thing will actually install its customized CWM Recovery which you'll find it COOL......& will also upgrade your Hboot again
Step 3:
It's time to ROOT your phone again.
- Use Unrevoked Method,,,the EASIEST way as far as I know.
Step 4:
Flash a custom ROM....I'm pretty sure you know how to do it.
I suggest flashing GingerVillain 2.7 [GingerBread 2.3.4] (not 2.8,,,still BETA I think)
- Make use of AlphaRev's Customized CWM Recovery.....in my case I partitioned the SD Card using AlphaRev's Customized CWM Recovery instead of using Linux's Gparted Utility (choose 2gb of partition if you have a bigger SD Card Space and 512mb of swapping)
- In making sure everything will work well...I did the following things;
>> Restart CWM after formatting and partitioning the SD Card.
>> Resatrt CWM after wiping.
>> Restart CWM after copying the custom ROM to SD Card.
DONE...The Rest is up to you.
To Moderators and Geeks in here......please correct any steps I have provided in here if you find it a bit OFF so as to help others who have encountered same issue as I had.....Thanks.
CREDITS TO ALL HARDWORKING PEOPLE AT XDA WHO TOOK THE TIME AND INITIATIVE TO POST ALL STEPS POSSIBLE IN RESOLVING SUCH ISSUES....
GOD BLESS YOU GUYS.
Edit:
I have learned that buying Cheap and Crappy Sd Card will not actually save you money but will further make your day worst.........so my suggestion is to buy the BEST one......just think of it as an investment (LOL!)
Comments?? Anyone???
Sent from my HTC Desire using XDA App

Phone won't recover

To lead off, I've searched this and found a similar thread to fix it, but it didn't fix it, so I'm asking the question.
Here's what I was doing when I jacked up my phone. I was using Titanium Backup to uninstall some apps and (for some ungodly reason) system data. In the middle of unstalling items, the phone just shut down and attempted to start back up. It gets stuck in a bootloop, so I pull the battery and pull up Hboot. This will run Fastboot but won't find a recover image, therefore won't let me select Recovery while in Hboot. I put a recovery image (advice from the thread I mentioned above) and put on the SD card. It still won't find it. The only option is to start update, which puts me into a bootloop.
My info is as follows:
ACE PVT SHIP S-OFF RL
HBOOT-0.85.0024
MICROP-0438
RADIO-26.10.04.03_M
eMMC-boot
April 12 2011,00:55:45
I apologize if I haven't searched enough to find this and if it's been answered a couple hundred times.
Any advice on what exactly I need to do to flash a recovery? I do have multiple nandroid backups to flash, if I can just get to them.
t4duzan said:
To lead off, I've searched this and found a similar thread to fix it, but it didn't fix it, so I'm asking the question.
Here's what I was doing when I jacked up my phone. I was using Titanium Backup to uninstall some apps and (for some ungodly reason) system data. In the middle of unstalling items, the phone just shut down and attempted to start back up. It gets stuck in a bootloop, so I pull the battery and pull up Hboot. This will run Fastboot but won't find a recover image, therefore won't let me select Recovery while in Hboot. I put a recovery image (advice from the thread I mentioned above) and put on the SD card. It still won't find it. The only option is to start update, which puts me into a bootloop.
My info is as follows:
ACE PVT SHIP S-OFF RL
HBOOT-0.85.0024
MICROP-0438
RADIO-26.10.04.03_M
eMMC-boot
April 12 2011,00:55:45
I apologize if I haven't searched enough to find this and if it's been answered a couple hundred times.
Any advice on what exactly I need to do to flash a recovery? I do have multiple nandroid backups to flash, if I can just get to them.
Click to expand...
Click to collapse
I'm not sure how you messed up your recovery, but you can replace it. Follow instructions in the PDF in post #7 of the Ace Think Tank thread (linked in my signature). Start around the bottom of page 8 or 9, the section labeled "S-OFF no recovery."
bananagranola said:
I'm not sure how you messed up your recovery, but you can replace it. Follow instructions in the PDF in post #7 of the Ace Think Tank thread (linked in my signature). Start around the bottom of page 8 or 9, the section labeled "S-OFF no recovery."
Click to expand...
Click to collapse
Thanks for the response, bananagranola. I've tried the dropbox link for the PDF and it's not working. It might be the fact that I'm at work and we're only allowed to use Internet Explorer and it says IE cannot display the webpage. I'm assuming Firefox or Chrome shouldn't give me problems.Once I get home, I'll try it and search the solution you've posted. Can you verifiy that those choices would access the dropbox link if you're using something different than IE?
t4duzan said:
Thanks for the response, bananagranola. I've tried the dropbox link for the PDF and it's not working. It might be the fact that I'm at work and we're only allowed to use Internet Explorer and it says IE cannot display the webpage. I'm assuming Firefox or Chrome shouldn't give me problems.Once I get home, I'll try it and search the solution you've posted. Can you verifiy that those choices would access the dropbox link if you're using something different than IE?
Click to expand...
Click to collapse
If you are at work, then you might have been forbid to access dropbox. This is the direct link, check if it works:
http://db.tt/YV7fTEx7
glevitan said:
If you are at work, then you might have been forbid to access dropbox. This is the direct link, check if it works:
http://db.tt/YV7fTEx7
Click to expand...
Click to collapse
Thanks, that worked. And we all appreciate the time and effort you guys spend in giving us a great phone...and how to fix them when we break them.
That download you just gave me was the recovery.img file, inside the zip file, but bananagranola was referencing a pdf. Can you make that available? I believe that was what I was trying to download unsuccessfully.
t4duzan said:
That download you just gave me was the recovery.img file, inside the zip file, but bananagranola was referencing a pdf. Can you make that available? I believe that was what I was trying to download unsuccessfully.
Click to expand...
Click to collapse
Ahh sorry, thought you couldn´t get hand on the recovery file. This is the link for the guide....
http://dl.dropbox.com/u/30674730/ULTIMATE ACE GUIDE V6.pdf
bananagranola said:
I'm not sure how you messed up your recovery, but you can replace it. Follow instructions in the PDF in post #7 of the Ace Think Tank thread (linked in my signature). Start around the bottom of page 8 or 9, the section labeled "S-OFF no recovery."
Click to expand...
Click to collapse
bananagranola, I didn't see a section labeled no recovery, but the one I'm thinking you're talking about is labeled in the PDF as 7. Checking S-OFF and custom recovery: If this is correct, the 1st thing I see is to make sure I read ACE PVT S-OFF or ACE PVT ENG S-OFF. Mine actually reads ACE PVT SHIP S-OFF RL. Could this be a problem? Anyway, in this section, it assumes I can select recovery in the bootloader. Another question: If I can't select recovery, is my bootloader messed up? And if so, do I need to rerun the Hack Kit by attn1 to possibly re-root and fix it all? I haven't seen anywhere in the Ultimate Ace Guide v6 PDF where it refers to a messed up recovery. Sorry, I've got lots of questions.
http://forum.xda-developers.com/showthread.php?p=33421701
Place in the root of sd card, reboot in hboot, follow instructions. You'll have the recovery, once done, remove the file from the root of the sd card or delete it.
Sent from a dream.
Teichopsia said:
http://forum.xda-developers.com/showthread.php?p=33421701
Place in the root of sd card, reboot in hboot, follow instructions. You'll have the recovery, once done, remove the file from the root of the sd card or delete it.
Sent from a dream.
Click to expand...
Click to collapse
Funny, this was nearly the same solution you helped me with last week when I was trying to restore my 4ext over TWRP recovery. Hopefully this will fix it.
Thanks!
t4duzan said:
Funny, this was nearly the same solution you helped me with last week when I was trying to restore my 4ext over TWRP recovery. Hopefully this will fix it.
Thanks!
Click to expand...
Click to collapse
Hahahaha..... That was you? I wanted to just link that post but couldn't remember where it was. Hopefully this will fix your issue.
Sent from a dream.
t4duzan said:
bananagranola, I didn't see a section labeled no recovery, but the one I'm thinking you're talking about is labeled in the PDF as 7. Checking S-OFF and custom recovery: If this is correct, the 1st thing I see is to make sure I read ACE PVT S-OFF or ACE PVT ENG S-OFF. Mine actually reads ACE PVT SHIP S-OFF RL. Could this be a problem? Anyway, in this section, it assumes I can select recovery in the bootloader. Another question: If I can't select recovery, is my bootloader messed up? And if so, do I need to rerun the Hack Kit by attn1 to possibly re-root and fix it all? I haven't seen anywhere in the Ultimate Ace Guide v6 PDF where it refers to a messed up recovery. Sorry, I've got lots of questions.
Click to expand...
Click to collapse
At the bottom of page 9 there's a section in bold and underlined labeled "S-OFF no custom recovery." It's in 14.d). But it looks like Tei's got you covered anyway.
bananagranola said:
At the bottom of page 9 there's a section in bold and underlined labeled "S-OFF no custom recovery." It's in 14.d). But it looks like Tei's got you covered anyway.
Click to expand...
Click to collapse
Just when I was feeling optimistic. I've put the recovery image on the root of my SD card and it still won't read it in Hboot. I found the section you're referring to, but one thing that I don't think will work is that when it states the following:
1) Boot in hboot and choose fastboot.
2) Plug the phone to pc (you have see fastboot usb in red phone)
My fastboot is still blue and it will automatically do it's thing, which is looking for a recovery and not finding one. Normally it'll come back to the Hboot screen and I can use the volume rockers and select Recovery.
So, A couple of months ago, I went from a 16gb to a 32gb card, and still have the 16gb card, so I put that in and I can recover properly with that one. So, thanks to you 3 for all of your help, but I want to ask one last question. I really want to use my 32gb card. Is there a folder, I have one named Android, for instance, that I can copy from my 16 to my 32 and get it working, or can I just boot up with my 16 and swap out with my 32 and hope everything gets formatted and saved as it should? Or, any other suggestions on how I can get my 32 to work, like any other files that I can copy over?
Thanks again for the great advice.
t4duzan said:
Just when I was feeling optimistic. I've put the recovery image on the root of my SD card and it still won't read it in Hboot. I found the section you're referring to, but one thing that I don't think will work is that when it states the following:
1) Boot in hboot and choose fastboot.
2) Plug the phone to pc (you have see fastboot usb in red phone)
My fastboot is still blue and it will automatically do it's thing, which is looking for a recovery and not finding one. Normally it'll come back to the Hboot screen and I can use the volume rockers and select Recovery.
So, A couple of months ago, I went from a 16gb to a 32gb card, and still have the 16gb card, so I put that in and I can recover properly with that one. So, thanks to you 3 for all of your help, but I want to ask one last question. I really want to use my 32gb card. Is there a folder, I have one named Android, for instance, that I can copy from my 16 to my 32 and get it working, or can I just boot up with my 16 and swap out with my 32 and hope everything gets formatted and saved as it should? Or, any other suggestions on how I can get my 32 to work, like any other files that I can copy over?
Thanks again for the great advice.
Click to expand...
Click to collapse
I could be wrong about this, but that sounds like a problem with the 32gb sdcard itself. I would try reformatting the 32gb entirely and try it again. If you do try swapping the cards out make sure you dismount/mount properly.
bananagranola said:
I could be wrong about this, but that sounds like a problem with the 32gb sdcard itself. I would try reformatting the 32gb entirely and try it again. If you do try swapping the cards out make sure you dismount/mount properly.
Click to expand...
Click to collapse
This morning, while my phone was up and running with my 16gb card, I took it out and put in my 32gb card. I shut down in recovery and restored a nandroid and it booted up fine. I then did a full reboot, just to check...and it worked like it's supposed to. I'm assuming something must have been restored with the card once I was running and shutting down the phone. Hopefully this thread can be some use to someone who might run into this problem, no matter what phone or ROM they might be running.
Thanks again to all who contributed suggestions and ideas to helping me out. My phone would have been a paper weight, or just a plain old phone with serious limitations if it weren't for the great people here at XDA!
t4duzan said:
This morning, while my phone was up and running with my 16gb card, I took it out and put in my 32gb card. I shut down in recovery and restored a nandroid and it booted up fine. I then did a full reboot, just to check...and it worked like it's supposed to. I'm assuming something must have been restored with the card once I was running and shutting down the phone. Hopefully this thread can be some use to someone who might run into this problem, no matter what phone or ROM they might be running.
Thanks again to all who contributed suggestions and ideas to helping me out. My phone would have been a paper weight, or just a plain old phone with serious limitations if it weren't for the great people here at XDA!
Click to expand...
Click to collapse
Interesting. Glad you got it sorted out.

HTC Desire HD Olleh Carrier

Dear all
I have olleh carrier desire HD (think Korean version). Already unlocked for any sim.
I need stock recovery for this set. I have tried all RUU with WWE extension and always get error "Error 12" signature verification failed.
Even if I try to flash recovery I get error bootloader....... ERR
ACE PVT Ship S-ON RL
HBOOT-0.85.0019
MICROP-0438
RADIO-26.05.05.27_M3
eMMC-boot
I am facing issue that my mobile shows HTC white screen when loaded then shows olleh logo and then restart again & do the same process. Sometimes after 10 - 15 tries it starts and again give force close error or restarted when sense interface loaded.
Any help will be appreciated.
adeelio said:
Dear all
I have olleh carrier desire HD (think Korean version). Already unlocked for any sim.
I need stock recovery for this set. I have tried all RUU with WWE extension and always get error "Error 12" signature verification failed.
Even if I try to flash recovery I get error bootloader....... ERR
ACE PVT Ship S-ON RL
HBOOT-0.85.0019
MICROP-0438
RADIO-26.05.05.27_M3
eMMC-boot
I am facing issue that my mobile shows HTC white screen when loaded then shows olleh logo and then restart again & do the same process. Sometimes after 10 - 15 tries it starts and again give force close error or restarted when sense interface loaded.
Any help will be appreciated.
Click to expand...
Click to collapse
Do you know how to get cid number? I guess that there is.no ruu for you phone, so your best bet is to create a goldcard.
Sent from my GT-N7000 using xda app-developers app
glevitan said:
Do you know how to get cid number? I guess that there is.no ruu for you phone, so your best bet is to create a goldcard.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
I can't get into my phone now. It just show HTC logo and then olleh logo and restart again.
Can't find ruu
phone is s-on, unrooted
tried everything from stock recovery wipe cache, wipe data etc. nothing works.
Some one help
adeelio said:
I can't get into my phone now. It just show HTC logo and then olleh logo and restart again.
Can't find ruu
phone is s-on, unrooted
tried everything from stock recovery wipe cache, wipe data etc. nothing works.
Some one help
Click to expand...
Click to collapse
Just make a goldcard and everything would work fine after that
adeelio said:
I can't get into my phone now. It just show HTC logo and then olleh logo and restart again.
Can't find ruu
phone is s-on, unrooted
tried everything from stock recovery wipe cache, wipe data etc. nothing works.
Some one help
Click to expand...
Click to collapse
If You can access fastboot You are fine. You Need To Get the Cid number from fastboot not the phone full y booted...use the guide in My signature To help yourself
glevitan said:
Do you know how to get cid number? I guess that there is.no ruu for you phone, so your best bet is to create a goldcard.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
glevitan said:
If You can access fastboot You are fine. You Need To Get the Cid number from fastboot not the phone full y booted...use the guide in My signature To help yourself
Click to expand...
Click to collapse
Thank you
I am able to find CID i.e. KT__901
looking for a goldcard creation method without using my phone.
adeelio said:
Thank you
I am able to find CID i.e. KT__901
looking for a goldcard creation method without using my phone.
Click to expand...
Click to collapse
How to use this CID to create goldcard?
adeelio said:
How to use this CID to create goldcard?
Click to expand...
Click to collapse
The CID was actually to try to see if there was a RUU for your phone. Unfortunately it is not. So, now you have to create a goldcard. For it you will need another android working phone and an sdcard that works as a goldcard.
glevitan said:
The CID was actually to try to see if there was a RUU for your phone. Unfortunately it is not. So, now you have to create a goldcard. For it you will need another android working phone and an sdcard that works as a goldcard.
Click to expand...
Click to collapse
I have a question
I have created goldcard to the best of my knowledge via process mentioned beneath.
But still I have S-on on HBOOT of desire hd
Process:
Have 2 GB Sd card & 8 GB Sd card. Tried both.
1. Format SD card by placing it in card reader. (tried with both FAT & FAT32)
2. calculate CID i.e. 1b534d303030303010073d25b400a9b2 for 2GB card
3. reversed it i.e. b2a900b4253d071030303030304d531b
4. replaced first 2 digits i.e. b2 with 00. gives CID reversed 00a900b4253d071030303030304d531b
5. Copied it to http://psas.revskills.de/?q=goldcard and generated goldcard.img file
6. Putting card into card reader and connecting it with computer via USB slot.
7. Open Hxd editor. Open Removable drive under Physical Disk with unchecked Open as Read only.
8. Open goldcard.img file from Open Disk image.
9. Copied all offsets of goldcard.img window and paste write it on Removable Drive Image by selecting offset 00000000 to 00000170,
10. Saved edited Removable drive image.
11. Removing and checking whether card is still readable.
12. Putting it back into mobile slot of SD Card.
13. Entering in HBoot and still getting ACE PVT SHIP S-ON RL
If I am missing something kindly help.
adeelio said:
I have a question
I have created goldcard to the best of my knowledge via process mentioned beneath.
But still I have S-on on HBOOT of desire hd
Process:
Have 2 GB Sd card & 8 GB Sd card. Tried both.
1. Format SD card by placing it in card reader. (tried with both FAT & FAT32)
2. calculate CID i.e. 1b534d303030303010073d25b400a9b2 for 2GB card
3. reversed it i.e. b2a900b4253d071030303030304d531b
4. replaced first 2 digits i.e. b2 with 00. gives CID reversed 00a900b4253d071030303030304d531b
5. Copied it to http://psas.revskills.de/?q=goldcard and generated goldcard.img file
6. Putting card into card reader and connecting it with computer via USB slot.
7. Open Hxd editor. Open Removable drive under Physical Disk with unchecked Open as Read only.
8. Open goldcard.img file from Open Disk image.
9. Copied all offsets of goldcard.img window and paste write it on Removable Drive Image by selecting offset 00000000 to 00000170,
10. Saved edited Removable drive image.
11. Removing and checking whether card is still readable.
12. Putting it back into mobile slot of SD Card.
13. Entering in HBoot and still getting ACE PVT SHIP S-ON RL
If I am missing something kindly help.
Click to expand...
Click to collapse
Goldcard won't make the phone S-OFF. Just will let you flash any RUU and avoid the CID signature failed. But you haven't flashed a RUU, so nothing changed.
glevitan said:
Goldcard won't make the phone S-OFF. Just will let you flash any RUU and avoid the CID signature failed. But you haven't flashed a RUU, so nothing changed.
Click to expand...
Click to collapse
ok
So how do I know that Goldcard process is successful or not. Should I have to flash RUU to confirm whether it is successful or there is another way.
adeelio said:
ok
So how do I know that Goldcard process is successful or not. Should I have to flash RUU to confirm whether it is successful or there is another way.
Click to expand...
Click to collapse
When you finished patching the sdcard, you should enter that drive with no errors at all...but that is not insurance of anything..just a good sign.
adeelio said:
ok
So how do I know that Goldcard process is successful or not. Should I have to flash RUU to confirm whether it is successful or there is another way.
Click to expand...
Click to collapse
Successful in loading my mobile with holding vol down key when HTC logo appears.
gives forced close error several times but loaded.
then enabled USB debugging and successfully installed aahk for Desire HD.
Now going to flash rom. Can I still flash RUU on S-off, rooted set with custom recovery?
adeelio said:
Successful in loading my mobile with holding vol down key when HTC logo appears.
gives forced close error several times but loaded.
then enabled USB debugging and successfully installed aahk for Desire HD.
Now going to flash rom. Can I still flash RUU on S-off, rooted set with custom recovery?
Click to expand...
Click to collapse
Yes. S-OFF allows you to flash whatever you want.
glevitan said:
Yes. S-OFF allows you to flash whatever you want.
Click to expand...
Click to collapse
Installed this rom and stuck at HTC logo with white screen??
RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.6 0.29_26.14.04.28_M_release_225512_signed.exe
still have s-off. looking for options
tried several RUUs. All installed and shows congratulations. But when mobile reboots after RUU seccessful process, it gets stuck on HTC Bootlogo now. I tried different options without success. Also now I don;t have custom recovery but still have S-off.
Any instructions?
adeelio said:
Installed this rom and stuck at HTC logo with white screen??
RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.6 0.29_26.14.04.28_M_release_225512_signed.exe
still have s-off. looking for options
Click to expand...
Click to collapse
But has the ruu flashed OK?
Sent from my GT-N7000 using xda app-developers app
glevitan said:
But has the ruu flashed OK?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Yes RUU flashed ok with Congratulation screen and Exit option
but then htc logo loop again & agin.
tried several RUUs but no help.
Can some how install cwm recovery through Hboot beacuse fastboot gives error when flashing recovery.
adeelio said:
Yes RUU flashed ok with Congratulation screen and Exit option
but then htc logo loop again & agin.
tried several RUUs but no help.
Can some how install cwm recovery through Hboot beacuse fastboot gives error when flashing recovery.
Click to expand...
Click to collapse
Then, that might be a hardware issue....
glevitan said:
Then, that might be a hardware issue....
Click to expand...
Click to collapse
looks like it.
now my htc shows main interface of rom after loading and restarted.
Also now sometimes while loading mobile it gives sound with vibration like something is sparking inside it.
adeelio said:
looks like it.
now my htc shows main interface of rom after loading and restarted.
Also now sometimes while loading mobile it gives sound with vibration like something is sparking inside it.
Click to expand...
Click to collapse
ok
now after doing several things. I don't remember what (several things) phone shows HTC logo, Olleh logo & then give glimse of main interface with drag down option and then rebooted. Doing it regularly almost everytime it tries to boot.
I even tried to boot in safe mode. same issue. rebooted showing main interface with Safe Mode written in left bottom corner.
now my mobile is S-on again but I have goldcard i made earlier. Have stock rom again.
After several hours of searching and reading at last successful in unlocking boot and installing CWM recovery. Now downloading MIUI rom will update.
Steps:
1. Again created goldcard with Goldcard tool for windows using another android phone.
2. Searching for 3.13 rom KT KR and atlast downloading.
3. Updating boot from HTCDev.Com successfully
4. Unlocking via HTCDev
5. Manually flashing CWM recovery from fastboot
....
.....
6. Installed MIUI.us_ace_v4_2.10.19_Eng_Deo_ZipA_Signed_blind.zip
7. Install from SD Card Complete.
8. Rebooted system
9. HTC Logo vibrate then black screen
10. Again vibration and HTC Logo. Stuck at it.
Current Hboot information
*** UNLOCKED ***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.16.04.09_M
eMMC-boot
Dec 22 2011, 14:28:19
CWM Info
ClockworkMod Recovery v5.8.0.0
Instructions??

[Q] HTC Wildfire S - How to get back to original state?

Hello, I have HTC Wildfire S which was given to me. It will not get further than a screen which says
Unlocked
marvel pvt ship s-on rl
hboot-1.090099
microp-0451
radio-7.57.39.10m
feb 8 2012, 18.29.31
fast usb
etc
etc
etc.....
How do I get it back to the original factory settings/rom.
I do not know anything about working with phones so I would appreciate any advice/tutorials given.
Thanks
Fred_Bloggs said:
Hello, I have HTC Wildfire S which was given to me. It will not get further than a screen which says
Unlocked
marvel pvt ship s-on rl
hboot-1.090099
microp-0451
radio-7.57.39.10m
feb 8 2012, 18.29.31
fast usb
etc
etc
etc.....
How do I get it back to the original factory settings/rom.
I do not know anything about working with phones so I would appreciate any advice/tutorials given.
Thanks
Click to expand...
Click to collapse
if you need stock rom..i have made flashable zips of it so you can just flash it like regular rom and then done..check my work from my signature..
and also if you want to unroot phone fully and install stock firmware you need your original ruu,for that i have made guide check my work.
Thanks, going to check it out
I had a look at "your work" and I can't make sense of anything. I'm downloading stuff and putting it on a micro sd card and going to Recovery and installing from zip card. But I still get the words etc in my first post.
All I want to do is get back to the original state that the phone was delivered. The phone is from England and is on TMobile.
Can you supply help in simple terms, as in...
1 - download this
2 - install this
etc
etc
Thanks for any help, this is all new to me and I very much doubt I will mess with the phone once its back to the original state
Fred_Bloggs said:
I had a look at "your work" and I can't make sense of anything. I'm downloading stuff and putting it on a micro sd card and going to Recovery and installing from zip card. But I still get the words etc in my first post.
All I want to do is get back to the original state that the phone was delivered. The phone is from England and is on TMobile.
Can you supply help in simple terms, as in...
1 - download this
2 - install this
etc
etc
Thanks for any help, this is all new to me and I very much doubt I will mess with the phone once its back to the original state
Click to expand...
Click to collapse
you need to check this guide
http://forum.xda-developers.com/showpost.php?p=39043412&postcount=8
and download this and all are links of my appropriate threads..
i advised you to just install stock rom flashable zip.it ll put stock rom in your phone and also no hassle..
for original state meaning fully unroot and stock recovery ll be confusing and all you need your original ruu for that.
crossfire77 said:
you need to check this guide
http://forum.xda-developers.com/showpost.php?p=39043412&postcount=8
and download this and all are links of my appropriate threads..
i advised you to just install stock rom flashable zip.it ll put stock rom in your phone and also no hassle..
for original state meaning fully unroot and stock recovery ll be confusing and all you need your original ruu for that.
Click to expand...
Click to collapse
Thanks for the info so far. But I get to this stage
put it phone in usb mounting mode,and put that PG76IMG.zip on it and patch with goldcard.img
now just put that sdcard on your phone and wait...phone will detect zip and it ll asked for confirmation..say yes with volume up and you will be unrooted after sometimes(this process takes upto 5-10 min)
Click to expand...
Click to collapse
My phone is attached to my computer, I select usb mounting and the computer finds the sd card, GOLDCARD, and I copy PG76IMG.zip on to it.
What does patch with goldcard mean - how do I do it? Is the sd card supposed to be in the phone, or in the computers card reader when it is being patched?
Fred_Bloggs said:
Thanks for the info so far. But I get to this stage
My phone is attached to my computer, I select usb mounting and the computer finds the sd card, GOLDCARD, and I copy PG76IMG.zip on to it.
What does patch with goldcard mean - how do I do it? Is the sd card supposed to be in the phone, or in the computers card reader when it is being patched?
Click to expand...
Click to collapse
sd card supposed to be in phone.just mount disk storage and open goldcard utility and then u ll need to select goldcard.img which u downloaded and then patch..it ll show u goldcard is ready

Re-unlock bootloader / RUU for a5_ul

Ok i messed with this poor device so badly that i can't tell you...i successfully flashed cm12.1 nighlty but while charging the device simply turns off (i opened a thread about this topic but no one replied) so when i wake up in the morning i had no alarm. i decided then to try some other custom roms but in order to do that i had to RUU my device. Here comes the problem, i found many RUUs for this model but only 1 seemed to work...The RUU process stops at the very end with a message saying the it halted due to large image update...so i tried instead to flash the RUU via fastboot but notihing changed, the zip sent to the device is too large.
i have 3 solutions but i need ur help to make em work...
1) unlock the bootloader and restore a backup ==> the problem is that i simply can't re-unlock it...i tried everything (new unlock token, without sd card, with sd car, without sim card, with sd card; it simply remains relocked)
2) find a suitable RUU for my device that is less then 1 gb ==> the problem is that i can't find it anywhere. so i ask you, is it possible to clean the system partition to free space for the RUU? How?
my device info are:
A5_UL PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-1.101.111011.20.0123
OpenDSP-v27.2.2.00546.0311
OS-2.34.401.2
eMMC-boot 1536MB
Please, i really need your help, i read all the similar threads and tried everything but i can't make it work.

Categories

Resources