HTC Desire HD Olleh Carrier - Desire HD Q&A, Help & Troubleshooting

Dear all
I have olleh carrier desire HD (think Korean version). Already unlocked for any sim.
I need stock recovery for this set. I have tried all RUU with WWE extension and always get error "Error 12" signature verification failed.
Even if I try to flash recovery I get error bootloader....... ERR
ACE PVT Ship S-ON RL
HBOOT-0.85.0019
MICROP-0438
RADIO-26.05.05.27_M3
eMMC-boot
I am facing issue that my mobile shows HTC white screen when loaded then shows olleh logo and then restart again & do the same process. Sometimes after 10 - 15 tries it starts and again give force close error or restarted when sense interface loaded.
Any help will be appreciated.

adeelio said:
Dear all
I have olleh carrier desire HD (think Korean version). Already unlocked for any sim.
I need stock recovery for this set. I have tried all RUU with WWE extension and always get error "Error 12" signature verification failed.
Even if I try to flash recovery I get error bootloader....... ERR
ACE PVT Ship S-ON RL
HBOOT-0.85.0019
MICROP-0438
RADIO-26.05.05.27_M3
eMMC-boot
I am facing issue that my mobile shows HTC white screen when loaded then shows olleh logo and then restart again & do the same process. Sometimes after 10 - 15 tries it starts and again give force close error or restarted when sense interface loaded.
Any help will be appreciated.
Click to expand...
Click to collapse
Do you know how to get cid number? I guess that there is.no ruu for you phone, so your best bet is to create a goldcard.
Sent from my GT-N7000 using xda app-developers app

glevitan said:
Do you know how to get cid number? I guess that there is.no ruu for you phone, so your best bet is to create a goldcard.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
I can't get into my phone now. It just show HTC logo and then olleh logo and restart again.
Can't find ruu
phone is s-on, unrooted
tried everything from stock recovery wipe cache, wipe data etc. nothing works.
Some one help

adeelio said:
I can't get into my phone now. It just show HTC logo and then olleh logo and restart again.
Can't find ruu
phone is s-on, unrooted
tried everything from stock recovery wipe cache, wipe data etc. nothing works.
Some one help
Click to expand...
Click to collapse
Just make a goldcard and everything would work fine after that

adeelio said:
I can't get into my phone now. It just show HTC logo and then olleh logo and restart again.
Can't find ruu
phone is s-on, unrooted
tried everything from stock recovery wipe cache, wipe data etc. nothing works.
Some one help
Click to expand...
Click to collapse
If You can access fastboot You are fine. You Need To Get the Cid number from fastboot not the phone full y booted...use the guide in My signature To help yourself

glevitan said:
Do you know how to get cid number? I guess that there is.no ruu for you phone, so your best bet is to create a goldcard.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
glevitan said:
If You can access fastboot You are fine. You Need To Get the Cid number from fastboot not the phone full y booted...use the guide in My signature To help yourself
Click to expand...
Click to collapse
Thank you
I am able to find CID i.e. KT__901
looking for a goldcard creation method without using my phone.

adeelio said:
Thank you
I am able to find CID i.e. KT__901
looking for a goldcard creation method without using my phone.
Click to expand...
Click to collapse
How to use this CID to create goldcard?

adeelio said:
How to use this CID to create goldcard?
Click to expand...
Click to collapse
The CID was actually to try to see if there was a RUU for your phone. Unfortunately it is not. So, now you have to create a goldcard. For it you will need another android working phone and an sdcard that works as a goldcard.

glevitan said:
The CID was actually to try to see if there was a RUU for your phone. Unfortunately it is not. So, now you have to create a goldcard. For it you will need another android working phone and an sdcard that works as a goldcard.
Click to expand...
Click to collapse
I have a question
I have created goldcard to the best of my knowledge via process mentioned beneath.
But still I have S-on on HBOOT of desire hd
Process:
Have 2 GB Sd card & 8 GB Sd card. Tried both.
1. Format SD card by placing it in card reader. (tried with both FAT & FAT32)
2. calculate CID i.e. 1b534d303030303010073d25b400a9b2 for 2GB card
3. reversed it i.e. b2a900b4253d071030303030304d531b
4. replaced first 2 digits i.e. b2 with 00. gives CID reversed 00a900b4253d071030303030304d531b
5. Copied it to http://psas.revskills.de/?q=goldcard and generated goldcard.img file
6. Putting card into card reader and connecting it with computer via USB slot.
7. Open Hxd editor. Open Removable drive under Physical Disk with unchecked Open as Read only.
8. Open goldcard.img file from Open Disk image.
9. Copied all offsets of goldcard.img window and paste write it on Removable Drive Image by selecting offset 00000000 to 00000170,
10. Saved edited Removable drive image.
11. Removing and checking whether card is still readable.
12. Putting it back into mobile slot of SD Card.
13. Entering in HBoot and still getting ACE PVT SHIP S-ON RL
If I am missing something kindly help.

adeelio said:
I have a question
I have created goldcard to the best of my knowledge via process mentioned beneath.
But still I have S-on on HBOOT of desire hd
Process:
Have 2 GB Sd card & 8 GB Sd card. Tried both.
1. Format SD card by placing it in card reader. (tried with both FAT & FAT32)
2. calculate CID i.e. 1b534d303030303010073d25b400a9b2 for 2GB card
3. reversed it i.e. b2a900b4253d071030303030304d531b
4. replaced first 2 digits i.e. b2 with 00. gives CID reversed 00a900b4253d071030303030304d531b
5. Copied it to http://psas.revskills.de/?q=goldcard and generated goldcard.img file
6. Putting card into card reader and connecting it with computer via USB slot.
7. Open Hxd editor. Open Removable drive under Physical Disk with unchecked Open as Read only.
8. Open goldcard.img file from Open Disk image.
9. Copied all offsets of goldcard.img window and paste write it on Removable Drive Image by selecting offset 00000000 to 00000170,
10. Saved edited Removable drive image.
11. Removing and checking whether card is still readable.
12. Putting it back into mobile slot of SD Card.
13. Entering in HBoot and still getting ACE PVT SHIP S-ON RL
If I am missing something kindly help.
Click to expand...
Click to collapse
Goldcard won't make the phone S-OFF. Just will let you flash any RUU and avoid the CID signature failed. But you haven't flashed a RUU, so nothing changed.

glevitan said:
Goldcard won't make the phone S-OFF. Just will let you flash any RUU and avoid the CID signature failed. But you haven't flashed a RUU, so nothing changed.
Click to expand...
Click to collapse
ok
So how do I know that Goldcard process is successful or not. Should I have to flash RUU to confirm whether it is successful or there is another way.

adeelio said:
ok
So how do I know that Goldcard process is successful or not. Should I have to flash RUU to confirm whether it is successful or there is another way.
Click to expand...
Click to collapse
When you finished patching the sdcard, you should enter that drive with no errors at all...but that is not insurance of anything..just a good sign.

adeelio said:
ok
So how do I know that Goldcard process is successful or not. Should I have to flash RUU to confirm whether it is successful or there is another way.
Click to expand...
Click to collapse
Successful in loading my mobile with holding vol down key when HTC logo appears.
gives forced close error several times but loaded.
then enabled USB debugging and successfully installed aahk for Desire HD.
Now going to flash rom. Can I still flash RUU on S-off, rooted set with custom recovery?

adeelio said:
Successful in loading my mobile with holding vol down key when HTC logo appears.
gives forced close error several times but loaded.
then enabled USB debugging and successfully installed aahk for Desire HD.
Now going to flash rom. Can I still flash RUU on S-off, rooted set with custom recovery?
Click to expand...
Click to collapse
Yes. S-OFF allows you to flash whatever you want.

glevitan said:
Yes. S-OFF allows you to flash whatever you want.
Click to expand...
Click to collapse
Installed this rom and stuck at HTC logo with white screen??
RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.6 0.29_26.14.04.28_M_release_225512_signed.exe
still have s-off. looking for options
tried several RUUs. All installed and shows congratulations. But when mobile reboots after RUU seccessful process, it gets stuck on HTC Bootlogo now. I tried different options without success. Also now I don;t have custom recovery but still have S-off.
Any instructions?

adeelio said:
Installed this rom and stuck at HTC logo with white screen??
RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.6 0.29_26.14.04.28_M_release_225512_signed.exe
still have s-off. looking for options
Click to expand...
Click to collapse
But has the ruu flashed OK?
Sent from my GT-N7000 using xda app-developers app

glevitan said:
But has the ruu flashed OK?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Yes RUU flashed ok with Congratulation screen and Exit option
but then htc logo loop again & agin.
tried several RUUs but no help.
Can some how install cwm recovery through Hboot beacuse fastboot gives error when flashing recovery.

adeelio said:
Yes RUU flashed ok with Congratulation screen and Exit option
but then htc logo loop again & agin.
tried several RUUs but no help.
Can some how install cwm recovery through Hboot beacuse fastboot gives error when flashing recovery.
Click to expand...
Click to collapse
Then, that might be a hardware issue....

glevitan said:
Then, that might be a hardware issue....
Click to expand...
Click to collapse
looks like it.
now my htc shows main interface of rom after loading and restarted.
Also now sometimes while loading mobile it gives sound with vibration like something is sparking inside it.

adeelio said:
looks like it.
now my htc shows main interface of rom after loading and restarted.
Also now sometimes while loading mobile it gives sound with vibration like something is sparking inside it.
Click to expand...
Click to collapse
ok
now after doing several things. I don't remember what (several things) phone shows HTC logo, Olleh logo & then give glimse of main interface with drag down option and then rebooted. Doing it regularly almost everytime it tries to boot.
I even tried to boot in safe mode. same issue. rebooted showing main interface with Safe Mode written in left bottom corner.
now my mobile is S-on again but I have goldcard i made earlier. Have stock rom again.
After several hours of searching and reading at last successful in unlocking boot and installing CWM recovery. Now downloading MIUI rom will update.
Steps:
1. Again created goldcard with Goldcard tool for windows using another android phone.
2. Searching for 3.13 rom KT KR and atlast downloading.
3. Updating boot from HTCDev.Com successfully
4. Unlocking via HTCDev
5. Manually flashing CWM recovery from fastboot
....
.....
6. Installed MIUI.us_ace_v4_2.10.19_Eng_Deo_ZipA_Signed_blind.zip
7. Install from SD Card Complete.
8. Rebooted system
9. HTC Logo vibrate then black screen
10. Again vibration and HTC Logo. Stuck at it.
Current Hboot information
*** UNLOCKED ***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.16.04.09_M
eMMC-boot
Dec 22 2011, 14:28:19
CWM Info
ClockworkMod Recovery v5.8.0.0
Instructions??

Related

[SOLVED] No Boot, no ADB, no Recovery, only fastboot :( How to create a Goldcard now?

I'm stuck at a nearly 99% brick I think...
I've got an AMOLED Desire from T-Mobile Germany (still branded), with HBOOT 0.80.0000, rooted via Unrevoked and still S-ON.
The phone gets stuck during the boot process when the provider-splashscreen (or HTC-Logo) is shown at the beginning. Only pulling out the battery will shut the phone down.
The same happens when I try to get into Recovery via HBOOT. The only option is to pull the battery.
If I connect the phone via USB and enter Fastboot it is recognized by the computer with the command "fastboot devices".
I can't use ADB, because I can't access the recovery.
I downloaded the right RUU for my provider/amoled/hboot 0.80.0000 Desire (RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4. 06.00.02_2_release_126984_signed) and extracted the ROM.zip from the installer. I renamed the file to PB99IMG.zip and manually moved it to the SDcard using my computer.
But, when I enter HBOOT the file is recognized and extracted, but then it fails ...due to an "incorrect CID".
The same happens if I manually execute the RUU....exe under Windows with my phone plugged in via USB. (It's error code 131 in the flash program of the RUU....exe).
A very helpful user (cargo) of a german Android forum (www.android-hilfe.de - link to his posting) assumed that my HBOOT is not correctly displayed and I might have a "newer" one than 0.80.0000
This leaves me quite without any option than to flash HTC RUU 2.29.405.5, which brings HBOOT 0.93.0001...(but I may be able to downgrade again.)
But this flash process is only possible if I have a Goldcard, which I actually don't have at the moment
Is there any way to create a Goldcard for my device in my actual position (only fastboot working, no boot to run the system, no adb working, no recovery access)?
Every howto explaining the goldcard crating process requires either working adb or even a running system for apps like "goldcard helper" or being able to use "terminal emulator"
I would be very very thankful for every bit of help
Maybe there is some way
Thanks in advance guys!
I believe that goldcards are specific to the card and not the phone(read it somewere on here) so it should be possible to make one without using your phone.
Sent from my HTC Desire using XDA App
TheGhost1233 said:
I believe that goldcards are specific to the card and not the phone(read it somewere on here) so it should be possible to make one without using your phone.
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
As far as I know you need the phone for your goldcard. At least it was said in the tutorial I was following a few months back. You need to connect the phone to get the serial number (through ADB shell) which you will need to hex-reverse and put it on your SD card image.
To be honest, they are more sophisticated methods now (as I read) creating a goldcard, but since unrEVOked, i do not follow that part.
And by the way, why don't you flash the HTC RUU 2.29.405.5? 0.93 HBOOT can be downgraded. But with the latest tools you can S-Off, root & whatever with that HBOOT, too.
I just tried flashing the HTC RUU 2.29.405.5 with the PB99IMG-method.
But I get an error "CID incorrect"
I treid to execute the HTC RUU.exe and I get again error code 131...which means something like "user-ID error"
But I could grab a screenshot of the actual "version" of the RUU...or what is this?
Thanks guys
CID incorrect? Your phone is unbranded or branded? Because I found this:
ERROR [294] : INVALID VENDOR ID
Every device contains a short string that identifies the operator who sold it. Because the same device is sold by different operators, this prevents users from flashing a T-Mobile ROM to a device that was sold by Orange, for example. You probably need to Install a HardSPL or CID Unlock your device.
Click to expand...
Click to collapse
I recommend to find a RUU for your device (e.g Vodafone, T-mobile etc.)
Also:
ERROR [131]: CUSTOMER ID ERROR
One of these error messages will appear when you use the wrong RUU to do the update. The RUU will check if the Model ID and Language ID are compatible with the Android phone. Make sure you use the correct RUU to update.
Click to expand...
Click to collapse
If it's saying wrong CID then it's branded, simple as that
1. Boot your phone in fastboot
2. Run the ruu that matches your phone.
You need a T-mobile branded ruu.
You can look here for one that matches. http://shipped-roms.com/index.php?category=android&model=Bravo
I think you can try an UK one, because it is multilingual.
If it is giving you the same errors, then you picked a wrong version.
EddyOS said:
If it's saying wrong CID then it's branded, simple as that
Click to expand...
Click to collapse
well it said "incorrect cid" even with a t-mobile branded ruu :/
If you are rooted, then boot into the bootloader and flash a custom rom. Then create a gold card.
Lennyz1988 said:
If you are rooted, then boot into the bootloader and flash a custom rom. Then create a gold card.
Click to expand...
Click to collapse
Yes, try that too, if you can.
Also use a NOA2SD Rom if you dont have ext partition. Or create one on your PC (if you want to use an A2SD ROM).
How can I flash a Rom using the bootloader?
Simply rename the zipped Image of a custom Rom into "PB99IMG.zip", put in on the SDcard and boot into HBOOT?
Thank you
spaboleo said:
How can I flash a Rom using the bootloader?
Simply rename the zipped Image of a custom Rom into "PB99IMG.zip", put in on the SDcard and boot into HBOOT?
Thank you
Click to expand...
Click to collapse
Yes, if you rooted with unrEVOked. Boot in to recovery (clockworkMOD/AmonRa) wipe all data and flash a CUSTOM rom.
You don't have to rename it, it can be anything as soon as it is .zip
nagypapi said:
Yes, if you rooted with unrEVOked. Boot in to recovery (clockworkMOD/AmonRa) wipe all data and flash a CUSTOM rom.
You don't have to rename it, it can be anything as soon as it is .zip
Click to expand...
Click to collapse
Uhm...flashing a custom rom in general is no problem...but i can't access Recvoery
as described in the initial post of the thread only the bootloader (HBOOT) and fastboot are working.
spaboleo said:
Uhm...flashing a custom rom in general is no problem...but i can't access Recvoery
as described in the initial post of the thread only the bootloader (HBOOT) and fastboot are working.
Click to expand...
Click to collapse
Yeah, sorry, my bad.
Well you can try to falsh it via PB99IMG.zip, but i won't think it work.
your only hope is finding a working RUU. (at least seems to me, if you can access only fastboot).
Hi all, have same trouble with flashing via PB99IMG, but in my case, the device normally loads the firmware and returned to fastbut. When you try to go to recovery device hangs on the logo. Фfter removing the battery and re-attempt to restart the device, it begins to vibrate 7 times and then freezes on the logo. What do these vibration?
PB99IMG.zip will work as you don't need recovery. Just put it on the root of your SD card and boot into HBOOT. It'll find the file and flash it
did renaming rom to pb99img nd flash via hboot work for you?
i have a similar problem, rather same prob, only fastboot available
To let this thread maintain usefullness for future readers:
The solution was to take a goldcard from a friend and flash the right (matching hboot, provider and version) RUU, by using the PB99IMG method.
By this the phone will be set back to it's delivery state! This will include the Rom, all data in the NAND storage the recovery and everything else, which got modified like getting root access or S-OFF etc.
Troubles were caused by USB-Brick or an error on my old ext3 partition or maybe even corrupt data in my Titanium file-backup I restored a few days before the crash :/
I can't clearly say what is the main cause...maybe it was a combination of all.
If you don't have got any chance of getting another goldcard (yes the goldcard creation does NOT depend on the devices! It can be created with ANY android phone ) you are really screwed.
My advice: Always keep a spare microSD card, equipped with it's goldcard image around!
Because I was not able to find any method to echo the CID (Id of the SDcard) in fastboot.
Greetings
And good luck to all of you having comparable issues

[Q] Bootloop on g2 screen

Boot loop Boot loop Boot loop.
this is what i see when i take bootloader.
vision pvt SHIP S-ON
HBOOT-0.82.0008
MICDROP-0425
RADIO-26.08.04.30_M3
eMMC-boot
Apr 13 2011, 14:51:54
it has stock recovery.
its not rooted as u can see.
the problem is it wouldnt go past the g2 screen.
any help will be apreciated.
Try power & volume + to enter recovery and wipe cache... If this doesn't help also wipe data
Sent from my HTC Vision using XDA App
that didnt help but thanks
Humm...
So your stuck with a stock device
i will recomand to you - shipment rom
like :
http://shipped-roms.com/index.php?category=android&model=Vision
SEARCH the file name before on google to be sure that the file you took will match with your carrer
IF is EXE file plug your devices to pc on HBOOT, execute exe file and WAIT DON'T UNPLUG even if it will take more that a hour
hispeedworm said:
it might be because you tried the 1.12 verison pc10img.zip and your phone came with updated 1.19 version
PC10IMG_Vision_TMOUS_1.19.531.1_Radio_12.21.60.09b _26.02.01.15_M2_release_149459_signed.zip
try this one by putting in your sd card. your phone should flash it and it shouldnt say version is older...
download from here
http://shipped-roms.com/index.php?category=android&model=Vision
when you put it in sd card rename it to just PC10img.zip and reboot into bootloader and when it asks you to flash. let it flash
Click to expand...
Click to collapse

No recovery - S_ON -Orange -no boot into Android just bootloader

Hi ,
I have an HTC who planted and I can not do anything.
I try to put a zip on the memory card but nothing about it. RUU does not work on htc, bug at the time of restart in bootloader: s
BRAVO UNKNOWN SHIP S-ON
HBOOT-0.75.0000
TOUCH PANEL-SYNT0101
RADIO-4.05.00.11
Mar 5 2010,21:12:15
I can't do a Goldcard i don't know why, and change cid does not work because it is not recognizing the command "writecid"
Pleas help because i have no warranty now, so I can not send it to HTC
Use the 2.3.3 RUU
Which RUU is
EDIT: I found one in htcdev
Mixyde said:
Which RUU is
EDIT: I found one in htcdev
Click to expand...
Click to collapse
Instead of asking straight away try to do some searching, it helps.
I have the same problem with 2.33 : it gets stuck in waiting for bootloader , the phone get black screen and few second later : ERROR [171] : USB CONNECTION ERROR
EDIT: The logo Boot have change : I have black screen with HTC in grey
EDIT2 : after reboot because it still stuck int boot logo, the original boot came back
Mixyde said:
I have the same problem with 2.33 : it gets stuck in waiting for bootloader , the phone get black screen and few second later : ERROR [171] : USB CONNECTION ERROR
EDIT: The logo Boot have change : I have black screen with HTC in grey
EDIT2 : after reboot because it still stuck int boot logo, the original boot came back
Click to expand...
Click to collapse
So it's back to normal?
And for your USB connection error I'm guessing you weren't in fastboot.
Turn off the phone, hold BACK and POWER, then run the RUU with the phone plugged in.
No, nothing back to normal, I always was in fastboot, and when it says: reboot to bootloader, then the screen get black and nothing ..then ERROR [171]
look at my guide and using a RUU without usb
I tried and I get a message that passes very quickly, and I can not create GC.
I am in this situation [2]ADVANCED BOOT PROBLEMS S-ON
Mixyde said:
I tried and I get a message that passes very quickly, and I can not create GC.
Click to expand...
Click to collapse
you don't need to with the 2.3 update, are you sure you're doing this right?
Yes, and with the 2.3 update I juste have a .cab, not a rom.zip
EDIT: Sorry, I haven't seen the good directory
I placed the rom.zip in the root of my SD, and I renamed in PB99IMG.zip, I then placed the SD in the Desire and VOLDOWN + POWER ... and nothing
Okay I have absolutely no idea what on earth you're doing to your phone, so before you break it:
Download this
Extract the rom.zip and rename to PB99IMG.zip
put it on the root of your sd-card (NOT in any folders)
poweroff, hold VOLUME DOWN & POWER
when it asks to update, select yes.
After the bootloader, I have the fast message that the phone did not found a file or a wrong file
Well, this is weird, really don't see why it doesn't work..
You can try one more thing, make a goldcard (use this to get CID [copy without commas, spaces. Just letters/numbers], then follow this tutorial, and skip the part where they get the CID using the phone)
Then download this PB99IMG.zip and try it with that.
....Nothing, always the same quick message.
Mixyde said:
....Nothing, always the same quick message.
Click to expand...
Click to collapse
and you tried running the RUU from the PC in fastboot mode? I dunno, there's nothing else you can really try... if PB99IMG doesn't work and RUU doesn't work there are no other options...
Backup your sd-card, format it, then put the PB99IMG.zip on it, then try it one last time.. otherwise I dunno send it to HTC
Nothing works, so i will try to find a friend who had a Desire to help me doing a GC , now I have a Brick
Mixyde said:
Nothing works, so i will try to find a friend who had a Desire to help me doing a GC , now I have a Brick
Click to expand...
Click to collapse
I just said how to make a goldcard without a phone.. use the program to get the CID and then continue the tutorial without the phone (use an sd adapter)
Don't know whether it'll do you any good though..
By the way are you using the original cable when running the RUU?? sometimes it doesn't work if it's not.

[Q] Help with Hboot

Hey,
A month ago i tried to use the ace hack kit on my Desire HD and I seemingly screwed it up.
I came back to it to try and see what was possible.
After trawling through tons of forum posts I found:
- When my SD card is in the volume buttons do not work, nor does power.
- The above is the same even when using the only other microSD card i have.
- I put the PD98IMG.zip on my other SD card and booted in HBOOT, it proceeded to work and gave me a CID error.
- Tried to make micro SD card a "gold card" but can't due to only being able to access HBOOT.
- Went HBOOT > Recovery > Vol Up + Power > Wipe cache and clear data > Install of Micro SD > Doesn't work and just restarts.
- I am concerned the S-ON may be a big issue here, i did try RUU (i think its that, from htcdev, but didn't work since the version was incorrect)
When i come into HBOOT this appears:
ACE PVT SHIP S-ON RL
HBOOT-0.85.0024
MICROP-0438
RADIO-26.09.04.11_M2
eMMC-boot
Apr 12 2011,00:55:45
Below this is how buttons work and options of which are; Fastboot, Recovery, Factory Reset, Simlock, Image CRC.
Any help would be much appreciated so that I can stop using this old bashed around Nokia E63.
I am more than happy to provide any information you guys can think of, just tell me how to obtain it please.
Thanks!
Iribela said:
Hey,
A month ago i tried to use the ace hack kit on my Desire HD and I seemingly screwed it up.
I came back to it to try and see what was possible.
After trawling through tons of forum posts I found:
- When my SD card is in the volume buttons do not work, nor does power.
- The above is the same even when using the only other microSD card i have.
- I put the PD98IMG.zip on my other SD card and booted in HBOOT, it proceeded to work and gave me a CID error.
- Tried to make micro SD card a "gold card" but can't due to only being able to access HBOOT.
- Went HBOOT > Recovery > Vol Up + Power > Wipe cache and clear data > Install of Micro SD > Doesn't work and just restarts.
- I am concerned the S-ON may be a big issue here, i did try RUU (i think its that, from htcdev, but didn't work since the version was incorrect)
When i come into HBOOT this appears:
ACE PVT SHIP S-ON RL
HBOOT-0.85.0024
MICROP-0438
RADIO-26.09.04.11_M2
eMMC-boot
Apr 12 2011,00:55:45
Below this is how buttons work and options of which are; Fastboot, Recovery, Factory Reset, Simlock, Image CRC.
Any help would be much appreciated so that I can stop using this old bashed around Nokia E63.
I am more than happy to provide any information you guys can think of, just tell me how to obtain it please.
Thanks!
Click to expand...
Click to collapse
Your sdcard is corrupted to work as a gold card, that is why you get freezed in hboot. Get a new or different sdcard and then try flashing a ruu again.
Sent from my GT-N7000 using xda app-developers app
glevitan said:
Your sdcard is corrupted to work as a gold card, that is why you get freezed in hboot. Get a new or different sdcard and then try flashing a ruu again.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Yea i tried this and this does not work because as i said "i did try RUU (i think its that, from htcdev, but didn't work since the version was incorrect)"
i.imgur.com/QaVV3(dot)png
Getting past the HBOOT no matter the SD card for me is done by just putting sd card in the split second after i see its entering HBOOT, this works and it does recognise it (Because i said I put the PD98IMG.zip on my other SD card and booted in HBOOT, it proceeded to work and gave me a CID error.")
Thanks,
Iribela.
Iribela said:
Yea i tried this and this does not work because as i said "i did try RUU (i think its that, from htcdev, but didn't work since the version was incorrect)"
i.imgur.com/QaVV3(dot)png
Getting past the HBOOT no matter the SD card for me is done by just putting sd card in the split second after i see its entering HBOOT, this works and it does recognise it (Because i said I put the PD98IMG.zip on my other SD card and booted in HBOOT, it proceeded to work and gave me a CID error.")
Thanks,
Iribela.
Click to expand...
Click to collapse
You have to find a RUU from your carrier. Do the following, in a cmd session in the PC with the phone plugged in fastboot usb type: fastboot getvar all and then find the INFOcidnum and of course the INFOmain. With that information we can search for a RUU that works.
glevitan said:
You have to find a RUU from your carrier. Do the following, in a cmd session in the PC with the phone plugged in fastboot usb type: fastboot getvar all and then find the INFOcidnum and of course the INFOmain. With that information we can search for a RUU that works.
Click to expand...
Click to collapse
INFOcidnum: VODAP021
INFOversion-main: 1.31.405.6
Iribela said:
INFOcidnum: VODAP021
INFOversion-main: 1.31.405.6
Click to expand...
Click to collapse
I guess that I have a RUU that might help. Just let me check and I will send a PM (private message) :good:
Edit: There´s no RUU for that CID, but you can make a goldcard and flash an unbranded ROM. Do you know how to do that?
glevitan said:
I guess that I have a RUU that might help. Just let me check and I will send a PM (private message) :good:
Edit: There´s no RUU for that CID, but you can make a goldcard and flash an unbranded ROM. Do you know how to do that?
Click to expand...
Click to collapse
I read a few things on that, but i couldn't seem to get it to work. Help would be appreciated .
EDIT: I tried to make one but cant get CID, nothing worked and i looked for ages to try get it.
Thanks
Iribela said:
I read a few things on that, but i couldn't seem to get it to work. Help would be appreciated .
Thanks
Click to expand...
Click to collapse
Iribela, if you give me a couple hours we can manage to get connected via Teamviewer and I will lend you a hand. You will need a working android phone to make the goldcard. Here you have a tutorial on how that is done: http://www.addictivetips.com/mobile/how-to-easily-create-gold-card-for-htc-desire-without-hex-editing/
The goldcard tool can be downloaded from here: http://dl.dropbox.com/u/30674730/GoldCardTool_0.0.7.zip
I can lend you a hand on patching the sdcard. But I need you to get a working phone, so we can get adb working.
Teamviewer involves me taking control of your PC for a while to do the job...if that is ok with you.
So can i get my friend to give me a CID since he is on same carrier, my android phone won't work i can only get into HBOOT.
Once i get that CID i can manage, really appreciate the help.
Iribela said:
So can i get my friend to give me a CID since he is on same carrier, my android phone won't work i can only get into HBOOT.
Once i get that CID i can manage, really appreciate the help.
Click to expand...
Click to collapse
the CID you are getting in the goldcard tool is from the sdcard, not from your phone. That is how you patch your sdcard to convert it to a goldcard. If you are not sure just wait for me. That is why you need a working phone but with your sdcard (or the sdcard you are going to use to flash the RUU)
glevitan said:
the CID you are getting in the goldcard tool is from the sdcard, not from your phone. That is how you patch your sdcard to convert it to a goldcard. If you are not sure just wait for me. That is why you need a working phone but with your sdcard (or the sdcard you are going to use to flash the RUU)
Click to expand...
Click to collapse
Okay if you can pm how to go about getting it then that would be sick, i have to sleep now. I live in sydney australia (GMT+10) if u need to look at timezones.
appreciated,
iribela.
Iribela said:
Okay if you can pm how to go about getting it then that would be sick, i have to sleep now. I live in sydney australia (GMT+10) if u need to look at timezones.
appreciated,
iribela.
Click to expand...
Click to collapse
ok. Go to bed and as soon as I am free I will send a PM. Time zones suck for this kind of stuff...
FIXED IT WOOO.
Thanks, after hearing that CID was card specific i remembered sister has an android so used that to make a gold card and it worked
Iribela said:
FIXED IT WOOO.
Thanks, after hearing that CID was card specific i remembered sister has an android so used that to make a gold card and it worked
Click to expand...
Click to collapse
Glad you made it....enjoy. :cyclops:

Help Flashing RUU - Error 170

Hi,
Wonder if anyone can give me some tips. I'm trying to put my HTC Desire back to stock via the RUU, but can't seem to establish a connection with the phone and its current ROM.
Currently:
AlphaRev
Bravo PVT3 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.17-05.23
Aug 10 2010 17:52:18
ROM: Cyanogen 7
Android Ver: 2.3.7
BB: 32.56.00.32U_5.17.05.23
Mod Ver: CyanogenMod-7.1.0-Desire
I've tried the following:
Installing HTC Sync, Removing just HTC Sync, Trying to connect phone to both Windows 8 and Windows 7 environments and running RUU. Result was Error 170
Installing PdaNet, Installing HTC Drivers from there, generated an error code in Windows 8. Ran on Windows 7 VM, but RUU still errored with Error 170
Installing Android SDK and Google USB Drivers, running RUU and still getting error 170
Tried running it with the phone in debug mode, but get an "Android Device?" in Device Manager that i can't get to work.
Have tried using unrevoked drivers, and RUU still errors with Error 170.
Have tried with 2 different cables, 1 of which works fine with another phone.
Does anyone have any other tips to return my phone to stock?
ShadowedAnarchy said:
Hi,
Wonder if anyone can give me some tips. I'm trying to put my HTC Desire back to stock via the RUU, but can't seem to establish a connection with the phone and its current ROM.
Currently:
AlphaRev
Bravo PVT3 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.17-05.23
Aug 10 2010 17:52:18
ROM: Cyanogen 7
Android Ver: 2.3.7
BB: 32.56.00.32U_5.17.05.23
Mod Ver: CyanogenMod-7.1.0-Desire
I've tried the following:
Installing HTC Sync, Removing just HTC Sync, Trying to connect phone to both Windows 8 and Windows 7 environments and running RUU. Result was Error 170
Installing PdaNet, Installing HTC Drivers from there, generated an error code in Windows 8. Ran on Windows 7 VM, but RUU still errored with Error 170
Installing Android SDK and Google USB Drivers, running RUU and still getting error 170
Tried running it with the phone in debug mode, but get an "Android Device?" in Device Manager that i can't get to work.
Have tried using unrevoked drivers, and RUU still errors with Error 170.
Have tried with 2 different cables, 1 of which works fine with another phone.
Does anyone have any other tips to return my phone to stock?
Click to expand...
Click to collapse
Thy the PB99IMG.zip method.
Download the latest RUU (the 2.3 one).
Run it as administrator.
Tick the 'I understand the caution indicated above...' box, and click next.
At this point do not go any further.
Navigate to C:\Users\"Your Name"\AppData\Local\Temp (AppData is a hidden folder)
You should see one or two folders like this:
{719CE201-7B12-4A13-9AF6-8F359FE69C7B}
Go into the one with dotnetinstaller.exe in it.
Open up the next folder.
Copy rom.zip into another folder (outside of temp).
At this point just Cancel and quit out of the ROM Update Utility.\
Rename rom.zip to PB99IMG.zip and place it on the root of your sd-card.
Boot in Hboot.
Select Yes.
?????
Profit!!
Worked great, thank you so much! Thank given
Glad I helped
Sent from my toaster
Just so u know even tho uv sorted it, u need htc sync installed aswell to run a ruu
Sent from my non - JB HTC Desire
I got as far as booting in HBOOT and it said (after fully loading) "Error: Main is older".
I'm running "R2 ZM4.5" Redux.
I want to install the stock rom so that I can upgrade the HBOOT, so that I can S-OFF, so that I can somehow eventually repartition. (It's getting pretty confusing in my head about now).
Any advice for me?
Worked Great!
abaaaabbbb63 said:
Thy the PB99IMG.zip method.
Download the latest RUU (the 2.3 one).
Run it as administrator.
Tick the 'I understand the caution indicated above...' box, and click next.
At this point do not go any further.
Navigate to C:\Users\"Your Name"\AppData\Local\Temp (AppData is a hidden folder)
You should see one or two folders like this:
{719CE201-7B12-4A13-9AF6-8F359FE69C7B}
Go into the one with dotnetinstaller.exe in it.
Open up the next folder.
Copy rom.zip into another folder (outside of temp).
At this point just Cancel and quit out of the ROM Update Utility.\
Rename rom.zip to PB99IMG.zip and place it on the root of your sd-card.
Boot in Hboot.
Select Yes.
?????
Profit!!
Click to expand...
Click to collapse
Worked great! Thanks a lot
Can anyone point me in the direction of the latest RUU? The HTC Dev site is down, and I cannot see it on the list of ROMS in the android dev forum..
Thanks in advance.
marky9074 said:
Can anyone point me in the direction of the latest RUU? The HTC Dev site is down, and I cannot see it on the list of ROMS in the android dev forum..
Thanks in advance.
Click to expand...
Click to collapse
if ur looking for the 2.3gb upgrade from HTCDev then u can download it from bortaks guide in my sig, go down to resources and its there. also google shipped roms htc desire bravo (if u have bravo)
jmcclue said:
if ur looking for the 2.3gb upgrade from HTCDev then u can download it from bortaks guide in my sig, go down to resources and its there. also google shipped roms htc desire bravo (if u have bravo)
Click to expand...
Click to collapse
Thanks for that! I was on shipped roms earlier, but was looking under desire instead of bravo! Cheers
abaaaabbbb63 said:
Thy the PB99IMG.zip method.
Download the latest RUU (the 2.3 one).
Run it as administrator.
Tick the 'I understand the caution indicated above...' box, and click next.
At this point do not go any further.
Navigate to C:\Users\"Your Name"\AppData\Local\Temp (AppData is a hidden folder)
You should see one or two folders like this:
{719CE201-7B12-4A13-9AF6-8F359FE69C7B}
Go into the one with dotnetinstaller.exe in it.
Open up the next folder.
Copy rom.zip into another folder (outside of temp).
At this point just Cancel and quit out of the ROM Update Utility.\
Rename rom.zip to PB99IMG.zip and place it on the root of your sd-card.
Boot in Hboot.
Select Yes.
?????
Profit!!
Click to expand...
Click to collapse
I don't get the "Boot in Hboot >> Select Yes" thingy....now I'm stuck at there...I placed it into my SD card already. and I enter the bootloader, then to recovery. Nothing happens....anyone help?? T.T
pozer0118 said:
I don't get the "Boot in Hboot >> Select Yes" thingy....now I'm stuck at there...I placed it into my SD card already. and I enter the bootloader, then to recovery. Nothing happens....anyone help?? T.T
Click to expand...
Click to collapse
Follow the steps here:
http://forum.xda-developers.com/showpost.php?p=45298337&postcount=21
abaaaabbbb63 said:
Follow the steps here:
http://forum.xda-developers.com/showpost.php?p=45298337&postcount=21
Click to expand...
Click to collapse
I think I've found the problem....my phone has PG58 instead of PG99...after I've renamed it, it works. Thanks a lot for your kind reply. Appreciate it. Now that I've already formatted my custom ROM with this stock ROM, my device does not have recovery any more, is that right? (eg. 4EXT and etc). Can you please tell me how to get those back, just in case I wanna return to using Custom Rom?
pozer0118 said:
I think I've found the problem....my phone has PG58 instead of PG99...after I've renamed it, it works. Thanks a lot for your kind reply. Appreciate it. Now that I've already formatted my custom ROM with this stock ROM, my device does not have recovery any more, is that right? (eg. 4EXT and etc). Can you please tell me how to get those back, just in case I wanna return to using Custom Rom?
Click to expand...
Click to collapse
Wait wait wait wait.
If you have a Sensation, do not use the zips above!!
Use a Sensation RUU, and, instead of renaming the zip PB99IMG.zip, rename it PG58IMG.zip.
abaaaabbbb63 said:
Wait wait wait wait.
If you have a Sensation, do not use the zips above!!
Use a Sensation RUU, and, instead of renaming the zip PB99IMG.zip, rename it PG58IMG.zip.
Click to expand...
Click to collapse
ya...i just needed a guide...the RUU is Sensation one. I downloaded it from other site...thx for the help, fellow!
abaaaabbbb63 said:
Thy the PB99IMG.zip method.
Download the latest RUU (the 2.3 one).
Run it as administrator.
Tick the 'I understand the caution indicated above...' box, and click next.
At this point do not go any further.
Navigate to C:\Users\"Your Name"\AppData\Local\Temp (AppData is a hidden folder)
You should see one or two folders like this:
{719CE201-7B12-4A13-9AF6-8F359FE69C7B}
Go into the one with dotnetinstaller.exe in it.
Open up the next folder.
Copy rom.zip into another folder (outside of temp).
At this point just Cancel and quit out of the ROM Update Utility.\
Rename rom.zip to PB99IMG.zip and place it on the root of your sd-card.
Boot in Hboot.
Select Yes.
?????
Profit!!
Click to expand...
Click to collapse
I have the Desire S and using Windows 8 trying to flash the 4.0 RUU from HTCDev but it keeps failing at "Waiting for Bootloader........." and then gives me the error 170/171 USB Connection error. My laptop, when the phone goes to the HTC Logo with black screen, says USB Device not recognized! What do I do? I have scoured the net and xda for answers, all of which don't work I don't have a microSD card either
ShadowedAnarchy said:
Worked great, thank you so much! Thank given
Click to expand...
Click to collapse
Can you please tell me how you did this? I need to get my phone back to factory image, boot loader is unlocked and rooted.
i) Could you please tell me where do you download the custom ROM file?
ii) How to put phone in Hboot mode?
guys im updating my htc desire 816 4.4.2 to 5 i didnt receive any update so i jst downloaded the rom from htc .com .. the file is something like "RUU SENSE 6" . that is rom of lolipop but it always shows the usb cable error ie error 171.... so please help me to update my rom!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Worked for me!
For HTC ONE M8:
Download the file: RUU_M8_UL_M60_SENSE70_ATT_MR_Cingular_US_6.20.502.5_combined.exe and run it.
Wait for extraction.
Go to C:\Users\username\AppData\Local\Temp\.
Find the files: "rom_01" and "rom_2".
(I've found them on: C:\Users\username\AppData\Local\Temp\{1BF9D767-EBE5-4470-A938-3C36AE93DF54}\{50F2F878-636A-496F-A7CB-544C067E0C4B}).
Copy the bigger file ("rom_2") to SDCARD.
Rename It to: 0P6BDIAG.zip (caution to double zip extension - 0P6BDIAG.zip.zip).
Continue the steps above.

Categories

Resources