Related
Hello, i use the AuraxTSense v7.6.1 roms. Iam a litte confused about the app2sd+. Ive created a 1024mb ext3 partition with gparted and wiped the phone.
When i look in quick system info (after installing some apps) i can read:
A2SD storage: 0.93MB, Free: 706MB
internal storage 148MB, Free: 23.27
Is this the normal way app2sd+ uses the availibe memory? I feel really bad with so less internal memory.
Ive got the feeling the app2sd+ dont write more than ~200mb on the ext3 memory.
Can someone tell me what to do?
Yeah, I'm in a similar situation.
I have Modaco's R8 with A2SD+ and I think some applications (such as Copilot) are definetely going to internal memory instead of ext3 partition.
I thought, since ext3 is symlinked as /data to fool android, all applications would end up in ext3... or have I got it totally wrong??
Why are we losing so much internal memory?
I have the exact same issue!
It is soooo anoying and I am about to go totally insane.
Even though i have partitioned my SD correctly it just eats internal storage 1:1 when i install apps.
...aslo selecting move to sd card in application manager have no effect on internal storage anyhow.
Ive got exactly the same problems. Do you have Amoled or Slcd, may they did some more hardware changes. Which rom do you use, may this is a aurextsense only issue?
Does someone have tried to partition the sd via root manager? If i do so, quick system info dont show me the partition.
Could it be possible that this is the normal app2sd+ behaviour and we just want more?
Does someone know where to find the author of app2sd+, may we could hask him (or her ;D).
i have the same problem and mine is amoled.
there has to be something wrong either with our rom developement or our setup on the phone.
help would be appreciated
btw my problem is that my dalvik cache is going to the phones memory instead of the sd! check if yours is the same under data/dalvik-cache
I have the AMOLED version and I have experienced the issues on ALL ROMs (froyo 2.2 based) that I have tried out.
I partitioned the SD card with ClockworkMod recovery 0 cache, 512 ext3.
Since I have experienced this issue on all ROMs I have tried I am starting to think that it is a SD related issue?
I never had the often build in aps2sd+ working at all.
Once I had the 2.2 build in apps2sd by google working but that was after fireing this at it: adb shell pm setInstallLocation 2.
After going back to AurexTSense rom and doing the adb shell one again it didnt work.
I couldnt even make it work again with the rom that I had it working on the one time earlier.
Since I am pretty confident that the partitioning of the SD is correct then the only difference left is that my SD is a "Gold" card.
Could this be the issue???
That the SD is a gold card?
One thing I do know for sure is that I am about to go outside and ask a total random individual if he knows what the problem is.
If he dont I will kill him and proceed with the next until SOMEONE can tell me what the #%#%#% is going on.
please delete...wrong thread...
I dont use a goldcard so i dont think this could be a problem.
iam using a 16gb sd card. may it doesnt work with this size?!
damn problem, i will go crazy with it .
Maybe the problem has something to do with the formatting of the SD card?
I personally used ROM Manager with Clockworkmod recovery to do the trick.
...perhaps that is what us experiencing this anoying error all has in common?
Because I have had the issue on all roms I have tried out I am reluctant to believe it has something to do with the SD card / formatting...?
Problem Solved...FINALLY!
Try getting the app called Quick System Info from the market.
It can detect your app2sd ext partition.
...so if you can see it in Quick System Info it is actually working.
What I did was (again) to repart my SD with 512 ext and 0 swap.
...then that issue is ruled out of the way.
Then I wiped everything and reinstalled my fav rom.
(which ROM you use does not matter at all just as long as it has apps2sd build in. This is NOT the google one in 2.2 i am talking about here.
Preferably your ROM should have app2sd+ installed and then it will automatically move all apps to SD.
Since the ext part is interlinked with internal storage you can also have widgets and other stuff on the SD which is NOT possible with google app2sd in F 2.2
After installing the ROM I downloaded Quick System Info from the market and noticed that i actually had an app2sd partition allocated and it had 385 MB free / initially it was 512 MB.
...so clearly apps has been moved to the ext part during first boot.
Cool, i went on to download google earth since its a giant app 22 MB.
The funny thing is that 6 out og 22 MB went to the ext part and the rest went to internal memory.
The same goes for Google Maps.
The thing is that some of the google apps simply has some modules that can ONLY be run from internal storage.
..aslo making these apps not so good for testing purposes in regrards to apps2sd.
Instead I installed some other apps like Break Out for droid which is about 8 megs.
It hammered into ext smoothly and taking nothing from internal storage.
Also DO NOT USE the google apps2sd as it will only move your apps from ext part into the fat32 part of your SD.
So if you have a correctly formatted SD card (like done with clockworkmod and rom manager) it will all be working automatically.
To be honest I have been fooled a bit by my own messing around
First i didnt have an ext part which ofcourse was the initial problem.
When i finally had the ext part I was stupid enough to test with the google apps and since i only was able to see amount of interal storage it appeared NOT to work.
Try it out guys and be as happy as I am now...finally
im using the amoled version of the desire, with the exact same version of auroxtsence as the op, as you can see from the screenshot, im using over 600mb on my ext3 partition....
why are some so apps going to ext3.and some not? Ive installed quake 2, it has gone to ext3. After deinstalling and reinstalling it goes to internal. This doeant make sense to me. Is this the normal behaviour?
Ive got 15 mb internal left and wasnt able to install minisquatron without using froyo a2sd. The a2sd+ dont use more than ~200mb.
So can someone tell me what to do or if someone think it runs normal tell what to test.
Is there any way of installing this damned a2sd without wiping out everything? I gues not, so ....stupid question.
Warning !
Do not look the a2sd storage in Quick System Info , this app (great app except for a2sd line ) is bugged .
Ive tchat about this on xda , and I'm not single who don't have a ext3 partition ( after deleted ) but the app say we have a storage a2sd !
Space is limited. (at least the space in our phones)
so I always read about apps2sd, data2sd, link2sd. I'm confused about how all they work, which ist best way to go. the information to read is very diffuse so don't blame me if I open a thread to understand the backgrounds.
So, I installed an app called App2SD (https://market.android.com/details?id=com.a0soft.gphone.app2sd&hl=de) and moved supported apps to SD.
Now there I have root, I want to get to know about alternatives. So what are the methods out there, what to stick to best?
thanks for your help in advance.
theq86 said:
Space is limited. (at least the space in our phones)
so I always read about apps2sd, data2sd, link2sd. I'm confused about how all they work, which ist best way to go. the information to read is very diffuse so don't blame me if I open a thread to understand the backgrounds.
So, I installed an app called App2SD (https://market.android.com/details?id=com.a0soft.gphone.app2sd&hl=de) and moved supported apps to SD.
Now there I have root, I want to get to know about alternatives. So what are the methods out there, what to stick to best?
thanks for your help in advance.
Click to expand...
Click to collapse
I prefer link2sd based on practical experience with all three methods.
I find it the most customizable and fastest although unlike the other two it's not a set it and forget it solution it allows for some definite benefits in terms of file placement and speed.
data2sd and data2whatever tend to bog down over time for some reason where as link2sd keeps up to speed. Lot's of nice features and a great user interface as well.
It's also easily reversible if you don't like it. I can't say the same for the other two.
Here's a link to the original developer's thread and a little tutorial.
Same, Link2sd never worked for me haha
just installed link2sd, after a lengthy process getting stock rom back from a bad CM7 experience....now have a happy healthy stock rom, perm rootedm with link2sd and virtually all apps on the 2nd sd partition. i've basically gone through the "my apps" list on my market account and "linked" everything that's on the market, and kept the rest (pre-installed/not available on the market?) on the internal memory.
internal mem is reporting 108mb free, and i have a little under 1gb on my sd's 2nd partition.
so far so good...touch wood....fingers crossed
so yeh, i'd vote for link2sd.....it also does seem fairly "automated" to me....whenever i download a new app, it automatically links it and moves it to the 2nd partition (although you can manually move it back to internal if you get roblems with a specific app).
Installed Link2SD now. I like it. thx +1 for you 2
I'd like to know how Data2SD handles over time. Using a single file seems a little monolithic but if it works you can't argue with results.
Haven't anyone tried S2E? It's completely automatic and you don't need to set up anything.
Enviado desde mi HTC Wildfire S usando Tapatalk
Hey Dan,
I've never heard of the app, but a quick google search suggests it's made primarily for CM7. Link2SD does work well for the most part so I think it would be foolish to jump into something else. I've not seen the battery drain that some people have complained about too. The only real alternative for those trying to avoid custom ROM's is Data2SD, which I've heard mixed reviews about.
theq86 said:
Installed Link2SD now. I like it. thx +1 for you 2
Click to expand...
Click to collapse
Huh? I thought your phone was bricked.
Sent from my Samsung Galaxy Tab 8.9
Another +1 for link2SD
Sent from my HTC Flyer P512 using Xparent Purple Tapatalk
Link2SD works fine except for the fact that some apps like maps and gmail cause problems when moved..
And when I start up my phone (no fastboot) it always says low internal memory and then Link2SD starts to link all apps which gives me about 60MB free space
mattio,
gmail causes problems? ive not observed a problem with gmail as of yet, what kind of problems?
Gloris said:
just installed link2sd, after a lengthy process getting stock rom back from a bad CM7 experience....now have a happy healthy stock rom, perm rootedm with link2sd and virtually all apps on the 2nd sd partition. i've basically gone through the "my apps" list on my market account and "linked" everything that's on the market, and kept the rest (pre-installed/not available on the market?) on the internal memory.
internal mem is reporting 108mb free, and i have a little under 1gb on my sd's 2nd partition.
so far so good...touch wood....fingers crossed
so yeh, i'd vote for link2sd.....it also does seem fairly "automated" to me....whenever i download a new app, it automatically links it and moves it to the 2nd partition (although you can manually move it back to internal if you get roblems with a specific app).
Click to expand...
Click to collapse
Hi,
what is the ext that you have on the 2nd partition?
I have ext4 and the Link2SD don't recognize the 2nd partition.
Cump,s
I've been using Link2SD ever since I started using CM. It has been working well for me. No issues with Gmail or Maps. Even my home screen app and keyboard are on the external partition. I just set CM to always keep the home screen in memory. The SD partition is formatted as ext2 because I don't see the need for a journaling filesystem (ext4).
Edit - to contribute to the original question.
I'm not so sure about the other options but I can explain a bit about Link2SD.
Basically what it does is move your application files to the external partition and then create symlinks where those files originally were. Symlinks are tiny files that arejust pointers to where the actual files are. The good part is that the OS does not care. It just sees the symlinks as the actual files. Seeing that it is the actual files that are symlinked, means that you can fine tune it to your needs... as opposed to linking whole directories or mounting a partition to something like/data/app/.
Sent from my HTC Wildfire S using XDA App
skezza said:
mattio,
gmail causes problems? ive not observed a problem with gmail as of yet, what kind of problems?
Click to expand...
Click to collapse
When I move Gmail to 2nd partition (EXT2).
After reboot the app renames itself to com.google.android.gmail in the appdrawer
Gloris said:
just installed link2sd, after a lengthy process getting stock rom back from a bad CM7 experience....now have a happy healthy stock rom, perm rootedm with link2sd and virtually all apps on the 2nd sd partition. i've basically gone through the "my apps" list on my market account and "linked" everything that's on the market, and kept the rest (pre-installed/not available on the market?) on the internal memory.
internal mem is reporting 108mb free, and i have a little under 1gb on my sd's 2nd partition.
so far so good...touch wood....fingers crossed
so yeh, i'd vote for link2sd.....it also does seem fairly "automated" to me....whenever i download a new app, it automatically links it and moves it to the 2nd partition (although you can manually move it back to internal if you get problems with a specific app).
Click to expand...
Click to collapse
Whenever I link a app to 2nd Partition it also reduces some of my internal memory. My Internal memory is now showing 81MB free. Can someone please guide what to do for increasing internal memory (i am a noob with rooted WFS)
ibne101 said:
Whenever I link a app to 2nd Partition it also reduces some of my internal memory. My Internal memory is now showing 81MB free. Can someone please guide what to do for increasing internal memory (i am a noob with rooted WFS)
Click to expand...
Click to collapse
That's normal, some apps don't tell the internal memory that they were linked to the SD card.
Simply turn your phone off (hibernate) and turn it on again , this should give you the additional free memory
Link2SD
I've tinkered with Data2SD and A2SD also but just don't understand how they work. Wasted time restoring my SD card after wiping it out. Link2SD works perfectly but I see some ROM photos showing a ton of free internal space and can't seem to figure out a way to get that little bit of extra space.
ibne101 said:
Whenever I link a app to 2nd Partition it also reduces some of my internal memory. My Internal memory is now showing 81MB free. Can someone please guide what to do for increasing internal memory (i am a noob with rooted WFS)
Click to expand...
Click to collapse
Try these steps:
1) Using Link2SD uninstall all the stock htc application that you dont like and dont need ( Most of them can be removed without any problem -> All widgets, google search, twitter, facebook , facebook for htc sense, plurk, htc likes, htc hub, xms ebuddy, stocks and many more, i forgot the names ).
You can always backup these using titanium backup if you are apprehensive.
2) Backup every application , contact and sms on your phone because we will cleanout our phone.
3) Now when you are ready boot into recovery and clean Data, Cache and Dalvik Cache. If possible also backup your sd card and format both fat32 and ext2 partitions .
4) Reboot and install Link2Sd, Mount ext2 partition and setup to link your files ( from settings ) then reboot and freshly install everything. You will find a hugh difference in internal memory
---------------------------------------------------------
I had 80mb internal memory free with 52 application installed, I did the above things and now i have 110mb free space with 60 apps installed which also includes updates of the remaining stock applications. However after doing all this dont move anything to sd card using your a2sd or applications will get corrupted
cyclonus00210 said:
I've tinkered with Data2SD and A2SD also but just don't understand how they work. Wasted time restoring my SD card after wiping it out. Link2SD works perfectly but I see some ROM photos showing a ton of free internal space and can't seem to figure out a way to get that little bit of extra space.
Click to expand...
Click to collapse
Please follow my above tutorial, I am sure you will unleash true power of Link2SD
always lags when I use data2sd, it's very very slow. I use link2sd, no lags anymore
Sent from my HTC Wildfire S A510e
Hello all, I am a noob.
I Have come across a lot of helpful information here but I am falling short of my goal...
I have a wildfire s with wildchild 3 installed on it and guess what... I have storage issues.
I am using link2sd and also have titanium backup pro which as I am aware it the best app to move data.
I have already integrated the sys dalvik into the rom which has provided me with space but the data continiues to clog the phone up.
I have read many forums but can not find a answer that works for me.
I am led to believe that the name for the mount script or folder is stopping me from getting the option in TB to copy data to sd.
I am really lost for answers and seek words of wisdom.
This is the final hurdle and once I pass this then I know my wildfire will be the greatest it can be.
If anyone can help then I would be extremely greatful.
Tony
try this, worked like a charm for me
http://forum.xda-developers.com/showthread.php?t=1735773&page=47
[post 464]
Well I must say this had worked very well for me!... Right up to the point when I rebooted my phone and it got stuck on the ROM loading screen.
I had only installed 2 apps too which I moved to SD and copied the data over from the Google Maps app.
Could it be that the ROM is not compatible?
Asad_612 said:
try this, worked like a charm for me
http://forum.xda-developers.com/showthread.php?t=1735773&page=47
[post 464]
Click to expand...
Click to collapse
tony2986 said:
Well I must say this had worked very well for me!... Right up to the point when I rebooted my phone and it got stuck on the ROM loading screen.
I had only installed 2 apps too which I moved to SD and copied the data over from the Google Maps app.
Could it be that the ROM is not compatible?
Click to expand...
Click to collapse
I thought I had it...
I read on and saw that the mount thing that you mentioned had said to have 100mb free space for every 500mb ext so I partitioned my drive with only 256mb which technically would have worked perfect with the wildfire s' lack of storage,
It was going so well but now again out of the blue the device will not boot. anyone with any other ideas?
I had about 50-60 app's installed before it decided to give up and it showed over 80mb using the mount script that was recommended.
tony2986 said:
I thought I had it...
I read on and saw that the mount thing that you mentioned had said to have 100mb free space for every 500mb ext so I partitioned my drive with only 256mb which technically would have worked perfect with the wildfire s' lack of storage,
It was going so well but now again out of the blue the device will not boot. anyone with any other ideas?
I had about 50-60 app's installed before it decided to give up and it showed over 80mb using the mount script that was recommended.
Click to expand...
Click to collapse
How much size did you allocate for both partitions, FAT 32, and EXT2?
I have a 4GB card, and i partitioned it like this:
FAT 32 , primary, 2.69 GB
EXT2, primary, 1 GB
P.s. Speed Droid's ROM is working fine with this, you could try this if you still have issues
Asad_612 said:
How much size did you allocate for both partitions, FAT 32, and EXT2?
I have a 4GB card, and i partitioned it like this:
FAT 32 , primary, 2.69 GB
EXT2, primary, 1 GB
P.s. Speed Droid's ROM is working fine with this, you could try this if you still have issues
Click to expand...
Click to collapse
FAT32 29.4GB Primary
Linux Ext3 243MB Primary
I never noticed till now that the partition is Ext3. Could this make a difference? The partition was made using clockwork recovery and didn't give me the option to choose.
I am downloading the Speed Droid's ROM for testing but if I was honest... I am a lover of the Wildchild ROM's
tony2986 said:
FAT32 29.4GB Primary
Linux Ext3 243MB Primary
I never noticed till now that the partition is Ext3. Could this make a difference? The partition was made using clockwork recovery and didn't give me the option to choose.
I am downloading the Speed Droid's ROM for testing but if I was honest... I am a lover of the Wildchild ROM's
Click to expand...
Click to collapse
I would suggest to try it like this:
FAT32 27GB Primary
Ext2 2GB Primary (Use the MinitoolPartition Wizard)
Your not going to believe this...
I wasn't doing anything wrong at all. Its Poweramp!!! The app for some unknown reason seems to crash during installation and does some kind of damage to the phone/ROM causing it to not reboot.
I have tested this several times and now have 63 apps minus the system apps and of course minus the rogue poweramp and everything works fine and the phone reboots in way under a minute.
Dude, thank you very much for your help.
I thought that this might have been a common issue but obviously not due to the lack of comments...
With your help my wildfire is now as great as any other phone now.
Thank you
Have you tried cronmod int2ext?
tony2986 said:
Your not going to believe this...
I wasn't doing anything wrong at all. Its Poweramp!!! The app for some unknown reason seems to crash during installation and does some kind of damage to the phone/ROM causing it to not reboot.
I have tested this several times and now have 63 apps minus the system apps and of course minus the rogue poweramp and everything works fine and the phone reboots in way under a minute.
Dude, thank you very much for your help.
I thought that this might have been a common issue but obviously not due to the lack of comments...
With your help my wildfire is now as great as any other phone now.
Thank you
Click to expand...
Click to collapse
:good:
Hey guys,
I have searched so many threads and still I have issue with low space.
Currently I'm on CM11, partitioned an 8GB external sdcard to fat32 and ext2 (1GB). Link2sd is running fine. However when my internal space reaches around 800MB, I can't install apps anymore!!!
I have also used internal to external app and ext2sd from k2wl...it does swap space but the issue is I can't install any apps after that. Is there a better way to work around this issue?
Thanks in advance
adam2010 said:
Hey guys,
I have searched so many threads and still I have issue with low space.
Currently I'm on CM11, partitioned an 8GB external sdcard to fat32 and ext2 (1GB). Link2sd is running fine. However when my internal space reaches around 800MB, I can't install apps anymore!!!
I have also used internal to external app and ext2sd from k2wl...it does swap space but the issue is I can't install any apps after that. Is there a better way to work around this issue?
Thanks in advance
Click to expand...
Click to collapse
remove unnecessary storage apps and just keep link2sd
also wipe sd ext in recovery and remount script then see if it works
if it does not work in current rom i think will definitely work in a fresh rom
aditya rathee said:
remove unnecessary storage apps and just keep link2sd
also wipe sd ext in recovery and remount script then see if it works
if it does not work in current rom i think will definitely work in a fresh rom
Click to expand...
Click to collapse
Yeah I did format system and sdcard, got 3.7 back from internal memory and created ext2 for link2sd so far so good, wish there was a way to get the other extra 4gb
adam2010 said:
Yeah I did format system and sdcard, got 3.7 back from internal memory and created ext2 for link2sd so far so good, wish there was a way to get the other extra 4gb
Click to expand...
Click to collapse
have you tried sdmaid
if not then try it also
it is also a good app to clear cache and space
i am sure you will not be disappointed with that one
Hi guys,
I don't know what's happening with my gf's wildfire S. How much space should be left free after flashing a rom (with gapps)? I've tried couple and all I've got left is around 50MB from fresh install and around 30MB after auto updates. Is this normal?
I've done everything I could to free more space. Moved most apps to ext4 partition on a SD card but. Deleted a lot of unnecessary things but still she's got like 5MB space left on internal memory with 5 apps installed and moved to SD card.
WTF? She wants to kill me for messing with her phone and not helping.
I followed this guide: http://forum.xda-developers.com/showthread.php?p=45401294 tried couple of roms but no luck. As of now MarvellousSense][2.3.5 sense 2.1]( http://forum.xda-developers.com/showthread.php?t=2256576 ) is installed but same low memory problem. (((((((((((((
tomkkkk said:
Hi guys,
I don't know what's happening with my gf's wildfire S. How much space should be left free after flashing a rom (with gapps)? I've tried couple and all I've got left is around 50MB from fresh install and around 30MB after auto updates. Is this normal?
I've done everything I could to free more space. Moved most apps to ext4 partition on a SD card but. Deleted a lot of unnecessary things but still she's got like 5MB space left on internal memory with 5 apps installed and moved to SD card.
WTF? She wants to kill me for messing with her phone and not helping.
I followed this guide: http://forum.xda-developers.com/showthread.php?p=45401294 tried couple of roms but no luck. As of now MarvellousSense][2.3.5 sense 2.1]( http://forum.xda-developers.com/showthread.php?t=2256576 ) is installed but same low memory problem. (((((((((((((
Click to expand...
Click to collapse
1. Using a "minimal" GApps package will help a little
2. The device has only 150MB internal storage. Even if you use mini Gapps you will not have more than ~80MB
3. To solve the problem just use a rom that is int2ext compatible. 512MB (Will be the new storage amount) is a good and reliable size for the ext partition (If you dont know about setting up the sd for int2ext --> google it as i'm tired of typing instructions for questions that are solved a houndred times...)
4. Stock rom int2ext compatible can be found LINK
5. Want a newer android version? CM 10.1 ran reliable for a long time on my WFS
6. MAKE SURE TO READ AND UNDERSTAND EVERYTHING BEFORE FLASHING
7. NEVER MESS UP YOUR GIRL'S DEVICE
tomkkkk said:
Hi guys,
I don't know what's happening with my gf's wildfire S. How much space should be left free after flashing a rom (with gapps)? I've tried couple and all I've got left is around 50MB from fresh install and around 30MB after auto updates. Is this normal?
I've done everything I could to free more space. Moved most apps to ext4 partition on a SD card but. Deleted a lot of unnecessary things but still she's got like 5MB space left on internal memory with 5 apps installed and moved to SD card.
WTF? She wants to kill me for messing with her phone and not helping.
I followed this guide: http://forum.xda-developers.com/showthread.php?p=45401294 tried couple of roms but no luck. As of now MarvellousSense][2.3.5 sense 2.1]( http://forum.xda-developers.com/showthread.php?t=2256576 ) is installed but same low memory problem. (((((((((((((
Click to expand...
Click to collapse
I would suggest to try this ROM-- http://forum.xda-developers.com/showpost.php?p=50428735&postcount=1404
It's odexed and has a 100 MB free space in /data after installation. BTW you will have to find some slim Gapps from somewhere as it does not have much /system memory free. Flashing Gapps have nothing to do with your visible internal memory. As system apps are stored in system partition(you can't see it as internal memory). And I would suggest to use Link2SD to move apps to 2nd partition of SDCard(you will have to create it but there are good tutorials like-- http://forum.xda-developers.com/showthread.php?t=1432459 ). With this configuration I have 87 MB free space after installing about 20 apps. So it should work. Best of luck.