[Q] odin flash help please - Samsung Galaxy Nexus

ok so i have verizon galaxy nexus rooted and unlocked bootloader i tried flashing jelly bean rom and it is stuck in boot screen on my phone...i downloaded odin and the drives phone connects and all is good with that but i downloaded the factory image from android developers imm76k tar file and i unzipped it to a folder like im suppose to but when i search for the file with odin the tar file doesnt show up in the folder i put it in or in any folder i move it to...i tried doing it right from the zip file but that didnt work either please help me out...
either and idea to try or a link to another tar or rar file that odin will see
someone said windows can read ext. so that may be why it wont reconize the file as a tar even tho it ends in .tar but i dont know how to make it so it can read ext

Don't use odin. Use fastboot. Follow this link: http://forum.xda-developers.com/showthread.php?t=1626895

thanks for the help
El Daddy said:
Don't use odin. Use fastboot. Follow this link: http://forum.xda-developers.com/showthread.php?t=1626895
Click to expand...
Click to collapse
ok so i figured out what went wrong and how to fix it...the phone was stuck in boot screen and when i tried accessing recovery to load clock work mod it just booted the phone and got stuck on the boot screen so i used galaxy nexus tool kit and i re installed clock work mod and reinstalled my jelly bean rom and everything installed good but right before it loaded it came up with a messege say root may be lost do you wish to root phone...well last time i clicked yes and it failed to acheive root which was a root install for ics not jelly bean so this time i said no and everything booted up perfect i did lose the root but im ok with that jelly bean runs perfect flawless so thanks again for the info im glad this forum and section exist or i would be more lost than i am but im learning from the pros thanks again

deleted

Related

[Q] Problem With latest Firmware update oct 12

I am new here and would like to ask this question and I sure hope you can help.
So here is the story I work in IT I am very saving but never got the chance to root my phone because I didn't want to brick it. But now I am tired of waiting for jelly bean update for my T-mobile Samsung GS3. I watch all the videos on how to go into download mode and use Odin v1.85 to install a rom(I think that's what it does sorry if it's not correct I am a noob when it comes to this) Any way when I tried to install it everything passed and everything seemed ok. But when it rebooted it wasn't rooted and I didn't understand why so when I went back into download mode to see if I did something wrong. When I went back into it I found out something that I am pissed about. With the latest firmware update(please excuse if this is wrong but i think I am right) It says Qualcomm secureboot: Enable Does this mean they have locked the boot loader so I cannot root or put a custom rom on my GS3?
If you could please tell me what that means it would be great. I have uploaded a screen shot if anybody wants to see it. Is there a way around this?
You most likey flashed a non rooted firmware usually odin firmware isnt rooted unless someone linked u to a firmware with root injected right into it..are u on fw lj4 or lh2?? Either way there are very easy and safe ways to root..let me know if u want me to link u anything.
Also the bootloader is not locked there is no need to worry.. just odin flash clockwork.tar and then from there u can flash root and bingo!
Sent from my SGH-T999 using xda app-developers app
Five10legacy said:
I am new here and would like to ask this question and I sure hope you can help.
So here is the story I work in IT I am very saving but never got the chance to root my phone because I didn't want to brick it. But now I am tired of waiting for jelly bean update for my T-mobile Samsung GS3. I watch all the videos on how to go into download mode and use Odin v1.85 to install a rom(I think that's what it does sorry if it's not correct I am a noob when it comes to this) Any way when I tried to install it everything passed and everything seemed ok. But when it rebooted it wasn't rooted and I didn't understand why so when I went back into download mode to see if I did something wrong. When I went back into it I found out something that I am pissed about. With the latest firmware update(please excuse if this is wrong but i think I am right) It says Qualcomm secureboot: Enable Does this mean they have locked the boot loader so I cannot root or put a custom rom on my GS3?
If you could please tell me what that means it would be great. I have uploaded a screen shot if anybody wants to see it. Is there a way around this?
Click to expand...
Click to collapse
I 100% understand where you are coming from I'm in IT also:
Lets get to it then, shall we?
So first make sure the drivers are installed for your T-Mobile S3 (drivers link): http://www.samsung.com/us/support/owners/product/SGH-T999MBATMB
Next, download Odin v3.40: http://forum.xda-developers.com/showthread.php?t=1670973
Then, get all the files at this link, they contain the Odin version if you dont want to install it using the link above^, clockworkmod.tar & a SuperSU program to flash to get super user permissions & be officially rooted.
When you run ODIN, right click it & select Run from Administrator. Now click the PDA button & browse for the clockworkmod.tar & click start, it'll flash the recovery & auto reboot
Then to flash the SuperSU, reboot into recovery (i believe u hold down the volume down button, home button & power at the same time, if not then its the volume up button instead of the down button)
U should be in Clockworkmod now, click install zip from file, then choose zip from file, then navigate to the SuperSU program that you put on your INTERNAL memory (not external, which is your SD card), flash it & reboot.
Your officially rooted
by the way, let me know what rom you choose! Im between 2 right now, Frosty 4.1.1 v6 & XquizIT v33 (LIH/LI8)
Thanks both of you. I will try the links you sent me @svibrant67. I was just worried that they locked the boot loader and now I know its not so I am relived. When I follow these steps will it install Rom manager so I can make a nandroid backup? I just want to make sure I can get it back to stock just in case I have to get a warranty repair on it.
Five10legacy said:
Thanks both of you. I will try the links you sent me @svibrant67. I was just worried that they locked the boot loader and now I know its not so I am relived. When I follow these steps will it install Rom manager so I can make a nandroid backup? I just want to make sure I can get it back to stock just in case I have to get a warranty repair on it.
Click to expand...
Click to collapse
Once you flash clockworkmod.tar & your phone reboots, put it into clockworkmod recovery & from their before you flash anything else, nivigate to backup/restore, then backup & it'll make a nandroid .
Thanks for the Information I am currently running FrostyJB_4.1.1-v6 with kernel KT747 and modem UVLI7. This thing flies now. The only problem I am having is sometimes wifi calling stops but I bet it is mostly because the Offical JB rom isn't out yet. Also everytime I restart my phone it switches back to default keyboard and doesn't keep my Swiftkey as default. But besides that I am very happy. Thanks again for replying so fast.

[Q] help un rooting sn2

So I was looking at this you tube video here:http://www.youtube.com/watch?v=BTcslgE0RK4 and everything seems relatively easy except I go to dl the firmware Here:http://www.sammobile.com/firmware/ for my friends note 2 and I don't see a dl for USA or anything close to it. My question is which firmware do I dl? Thanks in advance!
http://forum.xda-developers.com/showthread.php?t=1968136
Just to clarify, I can use the aforementioned info in the link to un root the galaxy note II?
I "believe" that its the stock ROM untouched, no root no busy box no custom boot loader.
It will put your Note 2 back to the way it was when you first got it.
* If your uncertain then PM the OP of the post for confirmation.
Itchiee said:
I "believe" that its the stock ROM untouched, no root no busy box no custom boot loader.
It will put your Note 2 back to the way it was when you first got it.
* If your uncertain then PM the OP of the post for confirmation.
Click to expand...
Click to collapse
I followed the instructions in the link you had and when i go into odin and click pda it goes to the folder i downloaded the stock tar(which by the way is a zip folder called samsung updates which i thought was weird) but i dont see a stock tar and on my pc it wont let me extract the zip file....
GSIII Rooted Stock #SPURNATION
Inside the the zip file you downloaded should be a file that ends in .tar or .tar.md5 that is used in Odin.
If your not sure what you are doing you may want to brush up on the process first.
Homework - AKA How to Fix Your Situation
Itchiee said:
Inside the the zip file you downloaded should be a file that ends in .tar or .tar.md5 that is used in Odin.
If your not sure what you are doing you may want to brush up on the process first.
Homework - AKA How to Fix Your Situation
Click to expand...
Click to collapse
I must have gotten a hiccup in my first dl. I 're downloaded and followed instructions and achieved unroot! I'm an HTC dude coming over to samsung so it'll take some getting use to
GSIII Rooted Stock #SPURNATION

Bricked S3. Help!

I was rooting it with the toolkit and now when I turn it on. All I get it a blue LED. This is the tmo version.
I can still acess CWM and download mode.
Just get the ODIN from here --> http://forum.xda-developers.com/showthread.php?t=1771687
and download the ROM from here --> http://forum.xda-developers.com/showthread.php?t=1949687
and go here --> http://www.androidrootz.com/2012/09/how-to-install-clockworkmod-recovery-on.html
Good luck
mk92595 said:
I can still acess CWM and download mode.
Click to expand...
Click to collapse
Dont worry man then, you are on process to learn . Download stock rom from wildchild forum on development section and flsh via odin in download mode.
If you have external memory card download any rom you want from development section and place it on external memory card (via computer of course ) and flash on CWM.
Sent from my SGH-T999 using xda premium
mk92595 said:
I was rooting it with the toolkit and now when I turn it on. All I get it a blue LED. This is the tmo version.
Click to expand...
Click to collapse
That's the first thing I did when I got my S3 lol. Dont worry, it's an easy fix. Just use the instructions on VibrantThemer's third link, but use the file from his second link instead of the CWM file they are talking about and it will put you back to stock. The first link is the program you use to do it all. :good:
Edit: Odin also comes with the toolkit you used to root, so you don't really need to download it. Just go to the folder where you extracted it and open Odin
That's not really bricked. Your n00b kungfu is weak. Odin back to stock. Or just Odin a stock ROM with root already injected. Done & done.
I was going to say the same
puretone said:
That's not really bricked. Your n00b kungfu is weak. Odin back to stock. Or just Odin a stock ROM with root already injected. Done & done.
Click to expand...
Click to collapse
If you can get in then all is good
If you still have access to CWM, you could just flash a Custom ROM of you choice then and there. They way you won't have to ODIN back to stock and re-root again.

[Q] Please Help. Stuck On Initial Screen. Dr Ketans KK BL

Please Help Really Urgent, My dads gonna ... *insert worst here* ... me :crying::crying::crying:
Ok i decided to upgrade his phone gt-n7100 to kitkat 4.4, as a surprise .. but. :crying:
as per dr ketans instructions,
installed odin.
installed cwm.
downloaded N7100_ND3_DrKetan_Custom_ROM_V7_3. installed via cwm.
rebooted. worked fine.
But no net, and phone would not show charge icon so installed as recommended in the guide the bootloader N7100_ND from d-h.st/TQq
using odin (installed as bootloader)
rebooted ... but now phone stuck on intial screen. :crying: :crying: :crying:
CANNOT go into cwm
tried flashing cwm again. no avail
tried another rom N7100XXDMG1_N7100ODDDMG1_INU_Prerooted. it fails to flash
tried kies, to update rom, it says cannot update this device
cannot find stock image (hotfile is down), nor am sure if it will update.
please help, where did i went wrong. followed everything to the instructions. spend so long trying to fix it. finally posting here in hope of help
Please help. Thankss :crying:
ZainNaiz said:
Please Help Really Urgent, My dads gonna ... *insert worst here* ... me :crying::crying::crying:
Ok i decided to upgrade his phone gt-n7100 to kitkat 4.4, as a surprise .. but. :crying:
as per dr ketans instructions,
installed odin.
installed cwm.
downloaded N7100_ND3_DrKetan_Custom_ROM_V7_3. installed via cwm.
rebooted. worked fine.
But no net, and phone would not show charge icon so installed as recommended in the guide the bootloader N7100_ND from d-h.st/TQq
using odin (installed as bootloader)
rebooted ... but now phone stuck on intial screen. :crying: :crying: :crying:
CANNOT go into cwm
tried flashing cwm again. no avail
tried another rom N7100XXDMG1_N7100ODDDMG1_INU_Prerooted. it fails to flash
tried kies, to update rom, it says cannot update this device
cannot find stock image (hotfile is down), nor am sure if it will update.
please help, where did i went wrong. followed everything to the instructions. spend so long trying to fix it. finally posting here in hope of help
Please help. Thankss :crying:
Click to expand...
Click to collapse
1. Reboot to recovery - Power button+Home button+volume up then factory reset if this don't work:
2. Download a 4.4.2 rom from Sammobile and flash through Odin and then repeat the procedures to install Dr Keaton Rom.
Hope you can solve the problem.
ZainNaiz said:
Please Help Really Urgent, My dads gonna ... *insert worst here* ... me :crying::crying::crying:
Ok i decided to upgrade his phone gt-n7100 to kitkat 4.4, as a surprise .. but. :crying:
as per dr ketans instructions,
installed odin.
installed cwm.
downloaded N7100_ND3_DrKetan_Custom_ROM_V7_3. installed via cwm.
rebooted. worked fine.
But no net, and phone would not show charge icon so installed as recommended in the guide the bootloader N7100_ND from d-h.st/TQq
using odin (installed as bootloader)
rebooted ... but now phone stuck on intial screen. :crying: :crying: :crying:
CANNOT go into cwm
tried flashing cwm again. no avail
tried another rom N7100XXDMG1_N7100ODDDMG1_INU_Prerooted. it fails to flash
tried kies, to update rom, it says cannot update this device
cannot find stock image (hotfile is down), nor am sure if it will update.
please help, where did i went wrong. followed everything to the instructions. spend so long trying to fix it. finally posting here in hope of help
Please help. Thankss :crying:
Click to expand...
Click to collapse
You did a lot of steps that shouldn't have been done in the first place so instead of trying more things that wouldn't work just flash the official stock NE1 firmware from https://mega.co.nz/#!2QRmCbyb!YkWs927BfvYxqL-vJiQHXkshqG3UtqHm4XIDbgLsEK0 ,extract the zip file you'll get a tar file ,put your phone into download mode , (uninstall kies) only run odin, connect the phone to computer,make sure the ID:COM turns blue then check mark AP/PDA tab on odin and select the downloaded firmware.Dont touch anything else hit start and let odin do it's magic once your dad's phone successfully boots and you get network etc etc.then ask me i'll tell how to root the stock firmware and run custom ROM.Good luck.
singhpratik87 said:
You did a lot of steps that shouldn't have been done in the first place so instead of trying more things that wouldn't work just flash the official stock NE1 firmware from https://mega.co.nz/#!2QRmCbyb!YkWs927BfvYxqL-vJiQHXkshqG3UtqHm4XIDbgLsEK0 ,extract the zip file you'll get a tar file ,put your phone into download mode , (uninstall kies) only run odin, connect the phone to computer,make sure the ID:COM turns blue then check mark AP/PDA tab on odin and select the downloaded firmware.Dont touch anything else hit start and let odin do it's magic once your dad's phone successfully boots and you get network etc etc.then ask me i'll tell how to root the stock firmware and run custom ROM.Good luck.
Click to expand...
Click to collapse
Thankyou Sooooooo verrrrrrrrrrrrrrrrrrrrrry muchhhhhhhhhhh :laugh: Bless You.
Thanks For the detailed step by step with the link AND working reply. Thankyou. This is the first rom that worked, i even tried another and thought phone is dead and me.
Please let me know how to kitkat it now.
Should i follow same steps.
i.e install cwm
then should i first install wifi driver by dr ketan, or boot loader or the rom ? from here forum.xda-developers.com/showthread.php?t=2472270
Thanks again :laugh:
very odd.
the phone after flashing, is now booting into previous rom i.e 4.4 Kitkat ???
is my phone screwed? using odin 3.04
shouldn't it be booting into stock now as you said after the flashing
thanks
ZainNaiz said:
very odd.
the phone after flashing, is now booting into previous rom i.e 4.4 Kitkat ???
is my phone screwed? using odin 3.04
shouldn't it be booting into stock now as you said after the flashing
thanks
Click to expand...
Click to collapse
That's odd,go perform a factory reset and see what happens.Which one was your previous ROM?
Edit: After factory reset if it still boots in your old ROM, reflash the stock rom i gave you and then tell me what happens.
Use odin v3.09 at least ill give you the link hold on
http://odindownload.com/
Are you sure it's the OLD ROM and not stock rom?Check in settigns>>about device>>and tell what you see under build # cause the link i gave you is of Kitkat ROM too NE1 firmware
singhpratik87 said:
That's odd,go perform a factory reset and see what happens.Which one was your previous ROM?
Edit: After factory reset if it still boots in your old ROM, reflash the stock rom i gave you and then tell me what happens.
Use odin v3.09 at least ill give you the link hold on
Are you sure it's the OLD ROM and not stock rom?Check in settigns>>about device>>and tell what you see under build # cause the link i gave you is of Kitkat ROM too NE1 firmware
Click to expand...
Click to collapse
Thankyou. Downloaded Odin 3.09. Reflashed it. Its Stock Now KOT49H.N7100XXUFNE1
Please tell me should i now directly install dr ketans rom without boot loader and wifi? Thanks
ZainNaiz said:
Thankyou. Downloaded Odin 3.09. Reflashed it. Its Stock Now KOT49H.N7100XXUFNE1
Please tell me should i now directly install dr ketans rom without boot loader and wifi? Thanks
Click to expand...
Click to collapse
Yes you dont need bootloader nor wifi fix anymore since flashing official stock 4.4.2 you are on the newest boootloader.Now you need to root your phone.So you need philz touch 6.41.tar file and supersu v 1.97.
Philz tar file
SuperSu v1.97
Refer to this post of mine in another thread How to root
The above posts show how to flash recovery in odin and do exactly what it says in the image UNCHECK AUTO REBOOT IN ODIN once its done flashing and says pass phone wont be turned off so remove the phone from laptop and pull the battery out and follow my instructions there.
Once you boot your phone again after flashing superSU it will ask you if you want to disable KNOX select yes (knox will be triggered to 0x1 that means warranty will be void)
Also thank the person when you visit his thread since he made the thread and i just helped him a bit.his id is smeet.somaiya
singhpratik87 said:
Yes you dont need bootloader nor wifi fix anymore since flashing official stock 4.4.2 you are on the newest boootloader.Now you need to root your phone.So you need philz touch 6.41.tar file and supersu v 1.97.
Philz tar file
SuperSu v1.97
Refer to this post of mine in another thread How to root
The above posts show how to flash recovery in odin and do exactly what it says in the image UNCHECK AUTO REBOOT IN ODIN once its done flashing and says pass phone wont be turned off so remove the phone from laptop and pull the battery out and follow my instructions there.
Once you boot your phone again after flashing superSU it will ask you if you want to disable KNOX select yes (knox will be triggered to 0x1 that means warranty will be void)
Also thank the person when you visit his thread since he made the thread and i just helped him a bit.his id is smeet.somaiya
Click to expand...
Click to collapse
Thanks. Thanked the person. And Your Post.
Just installed cwm and super su. thanks again.
Btw the link to download odin seems to be spamware, insted of downloading odin, i got a program 104kb giving lots of options, and at the end still did not install odin. Just for info. (i already had odin later version, and used that before, but wanted to check if a newer one is available, so header over there).
Going to install dr ketans custom rom. fingers crossed.
Thanks for all the help, will update, how it goes.
It never asked me to disable knox...
Would it be problematic if knox is not disabled ? as i wanted to use knox.
...
Finished flashing dr ketans rom, and it booted just fine, albiet slow compared to the stock rom.
Thankyou Pratik for all the help with detail and correctness.
Bless You.
ZainNaiz said:
It never asked me to disable knox...
Would it be problematic if knox is not disabled ? as i wanted to use knox.
...
Finished flashing dr ketans rom, and it booted just fine, albiet slow compared to the stock rom.
Thankyou Pratik for all the help with detail and correctness.
Bless You.
Click to expand...
Click to collapse
Ya i think all the custom ROM for our note 2 are heavily modded the latest ones that's why sometimes just to feel the smoothness i flash back stock ROM and when i get bored of them i flash one of the custom roms.Glad to know you were able to successfully flash the rom of your choice.Enjoy.
Help
Hello everybody, I have a problem with my galaxy note 2 N7100.
The problem is the following:
One day I was using my phone normally, and all of a sudden the screen turned off and the phone never turned on again, (if you press the power button the screen turns a little gray, but you must be in a dark place to perceive it)
I can't access download or any other mode, or at least I can't detect if the phone has accessed it, because the screen just turns a little gray and does nothing else.
I have the drivers and have the official ROM for my region, ODIN installed, ADB, and other flashing tools and recovery files. But it has been long time since the last time I flashed something or did anything to the device and would appreciate a little help.
Can anyone here help me to solve this issue or knows what is happening with my phone?
Thank you for any kind of help you can give me
Update: I "think" I got into download mode blindly, just press the home+power+down vol buttons, then pressed up vol and connected the phone to the usb, surprisingly the computer made the usb sound that indicated me that the connection was recognized, Odin showed the ID:COM blue, so I proceeded to load the original rom and flash it, it took around 3.5 minutes and finally it showed succesful. But when I pressed the power button to turn on the phone, the screen still grey and doesn't start. I'm starting to think its a screen problem. I already purchased a new screen so I'm going to tell a frend to install it for me.
I'll be in touch

[Q] Help Sprint SIII bricked?? Will not boot but ODIN can recognize it

Same problem as the OP in this thread http://forum.xda-developers.com/showthread.php?t=2022459 Sprint s3 flash pacman JB and google apps the went to reboot recovery ask to reflash su yes phone powered off and no coming back on Odin does detect it on com05 when I plug it in but anything I try to do just says waiting on connection, will not go into recovery or download modes. is there anything I can do to fix it? kies or anything? and I edited the updater scripts to be able to flash pacman because every rom I tried would fail with error 7............ please help
I got it fixed with file from another forum, while follow info from yet another forum, the file that worked for me was HomefixSprint_S3_L710.img the debrick_sph_l710.img would not work for me. I used win32diskimager and burned .img file to class 10 32gb card, stuck it in went in to download mode and used odin to write firmware file... Anyway back up any running..
Kevinreid1 said:
I got it fixed with file from another forum, while follow info from yet another forum, the file that worked for me was HomefixSprint_S3_L710.img the debrick_sph_l710.img would not work for me. I used win32diskimager and burned .img file to class 10 32gb card, stuck it in went in to download mode and used odin to write firmware file... Anyway back up any running..
Click to expand...
Click to collapse
It probably didn't work because of the version you were running.
TheKryptonite said:
It probably didn't work because of the version you were running.
Click to expand...
Click to collapse
Yep I'd bet your right, guessing the homefix img is from Version 4.3
Were you running 4.4.2? If so, go to the link below and it should solve your problem.
http://forum.xda-developers.com/showthread.php?t=2740469
Sent from my SPH-L710 using XDA Free mobile app

Categories

Resources