Related
I need to return this phone back to Samsung to repair my broken USB. But I need to flash it back to unroot it and flash it back to stock.
I have no USB capabilities whatsoever.
I have tried Mobile ODIN but this phone model is not currently supported or it doesn't detect the model.
I have been reading for hours now and I have not found a definitive solution that works for this phone.
Does anyone have any advice?
Does anyone know where I can find this?
http://forum.xda-developers.com/showpost.php?p=19746620&postcount=35
He was linking to a flashable stock rom, kernel and recovery. The link is now gone... But this is what I need. something flashable since USB is gone.
Maybe someone knows how to make stock flashable? Or if anyone has a backup that is fully stock everything and is willing to help me out that would also be awesome.
Please please please please please!!! I need help!
MystikMajik said:
Does anyone know where I can find this?
http://forum.xda-developers.com/showpost.php?p=19746620&postcount=35
He was linking to a flashable stock rom, kernel and recovery. The link is now gone... But this is what I need. something flashable since USB is gone.
Maybe someone knows how to make stock flashable? Or if anyone has a backup that is fully stock everything and is willing to help me out that would also be awesome.
Please please please please please!!! I need help!
Click to expand...
Click to collapse
You can use FUS Downloader to get the odin flashable tars or use the links provided below. I recommend you use fus downloader if you can, as it has faster download speeds though.
http://www.hotfile.com/dl/159042353/c56b0ab/T989DTLLE4_T989DTLLE4_TLS.zip.html - Telus ICS
http://www.hotfile.com/dl/159504252/d690f93/T989UVLE1_T989TMBLE1_TMB.zip.html - T-Mobile ICS
http://fus.nanzen.se/ - Check Fus Downloader
namanjr said:
You can use FUS Downloader to get the odin flashable tars or use the links provided below. I recommend you use fus downloader if you can, as it has faster download speeds though.
http://www.hotfile.com/dl/159042353/c56b0ab/T989DTLLE4_T989DTLLE4_TLS.zip.html - Telus ICS
http://www.hotfile.com/dl/159504252/d690f93/T989UVLE1_T989TMBLE1_TMB.zip.html - T-Mobile ICS
http://fus.nanzen.se/ - Check Fus Downloader
Click to expand...
Click to collapse
Thanks for the response! I feel like I'm on my own here...
Is this flashable with CWM? I have no ODIN capabilities. No USB. And Mobile ODIN doesn't work for this phone...
MystikMajik said:
Thanks for the response! I feel like I'm on my own here...
Is this flashable with CWM? I have no ODIN capabilities. No USB. And Mobile ODIN doesn't work for this phone...
Click to expand...
Click to collapse
It's odin only, but i can convert it for CWM if you like. Did you buy it from Telus, Koodo, or T-Mobile?
namanjr said:
It's odin only, but i can convert it for CWM if you like. Did you buy it from Telus, Koodo, or T-Mobile?
Click to expand...
Click to collapse
Its Telus! If you can do that it would be awesome... I'm at my wits end... You'd be helping me a lot!
MystikMajik said:
Its Telus! If you can do that it would be awesome... I'm at my wits end... You'd be helping me a lot!
Click to expand...
Click to collapse
I should have it ready to download soon, I'm just adding the stock recovery and then i should be able to upload. I'll update this post when it's up and tested.
EDIT : It flashed me completely to stock without error, but it came out as 351MB so i need to find a new place to upload. Shouldn't be too much longer.
EDIT 2 : I have it uploading to Dev-Host now and should be up in about 30mins.
EDIT 3 : Uploaded here.
Well this has been quite the horrible week. I want to thank you for your work... Unfortunately it seems that I have lost root. In one of my previous attempts to go back to stock I flashed an unroot tmobile rom and it seems I'm now stuck with that and now unrooted. I'm guessing I'm screwed since there is no way to root without usb...
I want to shoot myself in the face...
Samsung is going to get a Telus S2 back with a Tmobile rom on it. There's no way they'll fix it now right?
Sent from my SGH-I897 using xda premium
MystikMajik said:
Well this has been quite the horrible week. I want to thank you for your work... Unfortunately it seems that I have lost root. In one of my previous attempts to go back to stock I flashed an unroot tmobile rom and it seems I'm now stuck with that and now unrooted. I'm guessing I'm screwed since there is no way to root without usb...
I want to shoot myself in the face...
Samsung is going to get a Telus S2 back with a Tmobile rom on it. There's no way they'll fix it now right?
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
It depends, do you still have a custom recovery? Also I know one-click root worked on Telus's Gingerbread rom so maybe a tool like that might work.
Well it's stock recovery now... And would one click work without usb?
Sent from my SGH-I897 using xda premium
have you tried to download su to see if maybe you just need to load that back up on your phone. If not there are programs like adbd Insecure adb wifi and goo manager that may somehow be able to get you back.
adbd Insecure - will allow you to push files over to your system even without root access
adb wifi - incase you need to send a recovery over to your sdcard and then use the proper commands to install
goo manager - has twrp 2.2.2.0 in it so if you install that program you flash their recovery through the app.
put the factory zip on your sdcard and hopefully voila!
Just some choices - hope one works and good luck
playya said:
have you tried to download su to see if maybe you just need to load that back up on your phone. If not there are programs like adbd Insecure adb wifi and goo manager that may somehow be able to get you back.
adbd Insecure - will allow you to push files over to your system even without root access
adb wifi - incase you need to send a recovery over to your sdcard and then use the proper commands to install
goo manager - has twrp 2.2.2.0 in it so if you install that program you flash their recovery through the app.
put the factory zip on your sdcard and hopefully voila!
Just some choices - hope one works and good luck
Click to expand...
Click to collapse
i just tried adbd on my own phone(since i never flashed back cm10 yet) and unfortunately when i start the app it asks for superuser.
Thanks for the replies! I'm gonna try goo manager right now...
But would something like this work?
http://forum.xda-developers.com/showthread.php?t=1501719
Update: Goo Manager isn't really doing anything unfortunately... It won't install anything I download. Seems simple enough so I'm sure I'm not doing anything wrong there...
Update #2: Yes. All of the above seem to need root, and since I don't have root...
Thank you playya for the sugesstions!
Thank you namanjr for doing that work... I wish I had waited longer to flash the rom I did!
I think its game over. I've been trying for a week and there's not a lot of options to flash stock, root/unroot if your USB is broken... which seems ridiculous to me but it is what it is...
namanjr said:
i just tried adbd on my own phone(since i never flashed back cm10 yet) and unfortunately when i start the app it asks for superuser.
Click to expand...
Click to collapse
My bad you do need root but damn goo won't let you flash recovery without root huh. Are you sure you can't put recovery image on sdcard and use adb wifi to send command to install recovery? Just thinking out loud
playya said:
My bad you do need root but damn goo won't let you flash recovery without root huh. Are you sure you can't put recovery image on sdcard and use adb wifi to send command to install recovery? Just thinking out loud
Click to expand...
Click to collapse
I don't think that will work, i used normal ADB to reinstall TWRP and it wouldn't flash until i used su.
What about this? http://www.xoomforums.com/forum/mot...a-update-zip-flash-through-recovery-wifi.html
Not our phone obviously... but with stock recovery shouldn't I be able to flash the official ota update? what is the stock recovery for?
EDIT: Sorry I'm just realizing the use of USB in that method... but still what is the stock recovery used for?
MystikMajik said:
What about this? http://www.xoomforums.com/forum/mot...a-update-zip-flash-through-recovery-wifi.html
Not our phone obviously... but with stock recovery shouldn't I be able to flash the official ota update? what is the stock recovery for?
EDIT: Sorry I'm just realizing the use of USB in that method... but still what is the stock recovery used for?
Click to expand...
Click to collapse
It can flashed OTA updates, signed zips/md5s, wipes cache partition, and factory restore. I tried the ODIN md5 file for stock and it never worked so unless someone cracks/or knows Samsungs signature i don't think it's much use. Also if you flash a rom for anything other then phones that are compatible with ours(I727, I717, etc), you will brick.
Hmmm... and I'm assuming there isn't somewhere you can download the official samsung OTA updates?
MystikMajik said:
Hmmm... and I'm assuming there isn't somewhere you can download the official samsung OTA updates?
Click to expand...
Click to collapse
I seen a link somewhere back when 2.3.6 came out for T-Mobile but it was only an incremental update and Telus doesn't have any OTA updates.
Been seeing a lot of post about how to install OTA with a rooted stock ROM. This is by far the easiest way for people to update and not lose any data. All are done using Odin 3.07 on Windows 7 and not going to link it or how to use it lots of tutorials out that show you.
To put in Download Mode -> Vol Down + Home + Power
To Boot into Recovery -> Vol Up + Home + Power
Things needed:
ROM
CWM-Recovery
Root zip file
ROMS
NOTE: These are the FULL firmware of LH1 and NOT small OTA. This is good to have as a backup should something go wrong.
Bell
Telus
Rogers
Sasktel
CWM-Recovery
See Attached, this is an Official CWM from CWM team. If you don't want to use this use whatever recovery you want or had before.
Root: MOVE THIS TO PHONE STORAGE
Chainfire SuperSU
1.) Boot into recovery and create backup, always better to backup
2.) Unzip firmware file and you will see 2 files a dll and md5. The one we need is the md5
Im with bell so mines is -> KIES_HOME_I747MVLALH1_I747MOYCALH1_20120814.100513_REV04_user_low_ship.tar.md5
3.) Put phone into download mode
4.) Load Odin select PDA and select the firmware file you unzipped in step 2. The MD5 file.
5.) Let the phone do its thing and do not touch it until you are at the lockscreen.
7.) Boot into download mode again and select PDA and this time select the recovery tar file
8.) Uncheck F. Reset and flash
9.) Once back on the lockscreen go into Recovery and install the CWM-SuperSU-v0.96.zip to root from phone storage.
10.) Get Triangle Away from here and reset counter.
Excellent guide with links thanks
Sent from my SGH-I747M using xda app-developers app
Any way to flash only the new modem, without reflashing the entire Rom ?
Sent from my SGH-I747
Thanks OP. But i have already flashed LH1 via ODIN. Now i want to install CWM, can you post to link to installation instructions of CWM v6.?
850T5m said:
Any way to flash only the new modem, without reflashing the entire Rom ?
Sent from my SGH-I747
Click to expand...
Click to collapse
Yes, right here.
New cwm flashable modem available here.
---------- Post added at 01:02 AM ---------- Previous post was at 12:59 AM ----------
David Dee said:
Yes, right here.
Click to expand...
Click to collapse
Lol you beat me by seconds.
Sent from my SGH-T999 using xda premium
tarick09 said:
Thanks OP. But i have already flashed LH1 via ODIN. Now i want to install CWM, can you post to link to installation instructions of CWM v6.?
Click to expand...
Click to collapse
Instructions are in his OP. I have pasted below:
7.) In Odin: Boot into download mode again and select PDA and this time select the recovery tar file (he has attached odin flashable cwm tar in the op)
8.) Uncheck F. Reset and flash
After that you will have CWM. Go to step 9 if you want to root and install SuperSU.
I already updated via Kies and of course now lost my root. If I follow this method (now, after the update) will I get root back or is there another method you guys would recommend? Thanks
#1RAGE said:
I already updated via Kies and of course now lost my root. If I follow this method (now, after the update) will I get root back or is there another method you guys would recommend? Thanks
Click to expand...
Click to collapse
You have essentially completed steps 1-5 above using Kies. Go to step 7 (6 is missing) and follow instructions to flash the CWM tar file attached in OP via ODIN and the supersu zip via CWM and you are done.
I was about to follow the video guide found in this thread: http://forum.xda-developers.com/showthread.php?t=1728824 which shows you how to root and install CWM without tripping the flash counter. Can I follow his installation instructions, but instead use the rooted stock Telus rom linked to in this thread? I assume that if i follow the guide in his thread and use the files he links to, I will end up re-flashing the stock 4.0.1 rom instead of the new 4.0.4, which I want to keep.
Plus I want to have CWM and not trip my flash counter so I dont need to bother with Triangle Away.
This is my first time rooting or flashing anything to my phone, so my apologies for my extreme n00bness. Thanks
sn0w420 said:
I was about to follow the video guide found in this thread: http://forum.xda-developers.com/showthread.php?t=1728824 which shows you how to root and install CWM without tripping the flash counter. Can I follow his installation instructions, but instead use the rooted stock Telus rom linked to in this thread? I assume that if i follow the guide in his thread and use the files he links to, I will end up re-flashing the stock 4.0.1 rom instead of the new 4.0.4, which I want to keep.
Plus I want to have CWM and not trip my flash counter so I dont need to bother with Triangle Away.
This is my first time rooting or flashing anything to my phone, so my apologies for my extreme n00bness. Thanks
Click to expand...
Click to collapse
If you use the rooted ROM in the other thread you will have that version and not the August LH1 update, remember the ones i linked are full stock firmware. Maybe someone will create a stock rooted flashable odin tar, but you really dont need it. Just flash using the above steps and use Triangle Away. Triangle Away although dangerous does no harm at all, its a simple apk file that installs like any other app, once you confirm it is displaying the correct model (our is I747M) then just hit the reset counter and let it do its thing and then you can uninstall it simple as that.
No point in waiting for someone to create a no trip counter file because that is much hard to do. Plus the only reason I think the first ones where like that was because Triangle Away did not fully support the I747M.
sn0w420 said:
I was about to follow the video guide found in this thread: http://forum.xda-developers.com/showthread.php?t=1728824 which shows you how to root and install CWM without tripping the flash counter. Can I follow his installation instructions, but instead use the rooted stock Telus rom linked to in this thread? I assume that if i follow the guide in his thread and use the files he links to, I will end up re-flashing the stock 4.0.1 rom instead of the new 4.0.4, which I want to keep.
Plus I want to have CWM and not trip my flash counter so I dont need to bother with Triangle Away.
This is my first time rooting or flashing anything to my phone, so my apologies for my extreme n00bness. Thanks
Click to expand...
Click to collapse
The thread for the no trip method referred to in that video is here. The OP in that thread is still working on root injected versions for the new Canadian firmwares, the ones currently in the OP are the old versions. He can create them quickly, I think he is just waiting for volunteers to mirror the files. Keep checking and when you see a Telus version up ending in LH1, you are good to go.
Thanks OP, that works just fine to reroot my phone and reset the trip counter!
I have a rogers Galaxy SIII if that could help anyone!
New Telus, Rogers, Bell flashable modem zip LH1
http://d-h.st/qjN
stuck on samsung screen
i did all your instructions to a t except i was using odin 3.04 and now my phone is stuck on the samsung screen i can go into dl mode and stock recovery buy no boot up can u suggest somthing for me plzz.....???
jebise101 said:
Been seeing a lot of post about how to install OTA with a rooted stock ROM. This is by far the easiest way for people to update and not lose any data. All are done using Odin 3.07 on Windows 7 and not going to link it or how to use it lots of tutorials out that show you.
To put in Download Mode -> Vol Down + Home + Power
To Boot into Recovery -> Vol Up + Home + Power
Things needed:
ROM
CWM-Recovery
Root zip file
ROMS
NOTE: These are the FULL firmware of LH1 and NOT small OTA. This is good to have as a backup should something go wrong.
Bell
Telus
Rogers
Sasktel
CWM-Recovery
See Attached, this is an Official CWM from CWM team. If you don't want to use this use whatever recovery you want or had before.
Root: MOVE THIS TO PHONE STORAGE
Chainfire SuperSU
1.) Boot into recovery and create backup, always better to backup
2.) Unzip firmware file and you will see 2 files a dll and md5. The one we need is the md5
Im with bell so mines is -> KIES_HOME_I747MVLALH1_I747MOYCALH1_20120814.100513_REV04_user_low_ship.tar.md5
3.) Put phone into download mode
4.) Load Odin select PDA and select the firmware file you unzipped in step 2. The MD5 file.
5.) Let the phone do its thing and do not touch it until you are at the lockscreen.
7.) Boot into download mode again and select PDA and this time select the recovery tar file
8.) Uncheck F. Reset and flash
9.) Once back on the lockscreen go into Recovery and install the CWM-SuperSU-v0.96.zip to root from phone storage.
10.) Get Triangle Away from here and reset counter.
Click to expand...
Click to collapse
Repeat the steps with odin 3.07?
Sent from my SGH-I747M using xda app-developers app
Repeat with odin 3.07?
Sent from my SGH-I747M using xda app-developers app
oriveradel said:
New Telus, Rogers, Bell flashable modem zip LH1
http://d-h.st/qjN
Click to expand...
Click to collapse
Anyone confirm this is a good modem to use? I'm assuming this is a cwm flashable zip right?
Sent from my SGH-I747M using xda app-developers app
---------- Post added at 04:36 PM ---------- Previous post was at 04:32 PM ----------
Nevermind. Flashed and speeds seem a lot better. I'm getting around 7mb down using h+. No LTE out here (Ancaster)
Sent from my SGH-I747M using xda app-developers app
This is my baseband version I747MVLLH1 is the flashable modem a couple posts above newer than mine?
Sent from my SGH-I747M using xda premium
A little easier guide to get root?
Hi, I made this easier a little bit. Follow the posted guide from the op
Download your FW and Odin 3.07 (and ofc sammy drivers and what not)
1.) Boot into recovery and create backup, always better to backup
2.) Unzip firmware file and you will see 2 files a dll and md5. The one we need is the md5
Im with bell so mines is -> KIES_HOME_I747MVLALH1_I747MOYCALH1_20120814.100513 _REV04_user_low_ship.tar.md5
3.) Put phone into download mode
4.) Load Odin select PDA and select the firmware file you unzipped in step 2. The MD5 file.
5.) Let the phone do its thing and do not touch it until you are at the lockscreen.
7.) Boot into download mode again and select PDA and this time select the recovery tar file
Click to expand...
Click to collapse
Then
8.) click start, wait for you to go back to lockscreen.
9.) Flash the zip attached below (through your CWM) (vol up+ power button+ home button to get to recovery)
[BOOM you have root!]
10.) get triangle away, reset flash counter.
I did not make the zip i just got it from searching around.
I am able to use a jig to get into download mode. According to the stickie thread i need to make sure my counter is at zero. well its at (1) How do i do that if the device wont load completely?
according to the guide....
3. Put your phone into download mode. (Confirm that the count is set at 0)
4. Odin like you normally would.
How do i reset counter IN DOWNLOAD mode??
Thread title is misleading. Root, even when done improperly, will not cause the problem you are having.
To answer your question, you cannot reset the flash counter from download mode. What did you do to make you think you bricked your phone?
Aerowinder said:
Thread title is misleading. Root, even when done improperly, will not cause the problem you are having.
To answer your question, you cannot reset the flash counter from download mode. What did you do to make you think you bricked your phone?[/QUOTEIfirst of all thank you for the reply. I tried rooting using mskip guide.]the device wont load pass the samsung screen that flashes between two colors
Click to expand...
Click to collapse
Can I get a link to that guide, please?
Also, are you able to get into recovery mode? Vol up instead of down.
Aerowinder said:
Can I get a link to that guide, please?
Also, are you able to get into recovery mode? Vol up instead of down.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1900345 is the guide. I dont know how to do the buttons for recovery mode ill search forums
*edit DEVCE FIXED THANKS BRO
MikeJennni said:
I am able to use a jig to get into download mode. According to the stickie thread i need to make sure my counter is at zero. well its at (1) How do i do that if the device wont load completely?
according to the guide....
3. Put your phone into download mode. (Confirm that the count is set at 0)
4. Odin like you normally would.
How do i reset counter IN DOWNLOAD mode??
Click to expand...
Click to collapse
If you want to reset your phone back to factory stock with the counter being at zero, Odin back to ICS (root 66) then use Triangle Away (You can find it somewhere in the forums). Afterwards, check for system update so you could update the firmware to JB or you could just Odin Stock JB.
Sent from my SGH-T999 using xda app-developers app
Noobiologist said:
If you want to reset your phone back to factory stock with the counter being at zero, Odin back to ICS (root 66) then use Triangle Away (You can find it somewhere in the forums). Afterwards, check for system update so you could update the firmware to JB or you could just Odin Stock JB.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
i tried updating jb it didnt work said failed. I am used triangle away and am now trying ota rootkeeper and i temp am unrooted hoping this works. if it doesnt where do i get stock JB? and do you reccomend a rom?
Don't worry about keeping root. Just reflash SuperUser/SuperSU with CWM/TWRP. If you lose your recovery, reflash it with Odin. Don't use TriangleAway until you're done messing around with the phone.
For roms, if you want TW, I would pick FrostyJB or AeonFluxx. I personally don't use TW roms, but if I did, it would be one of those. I like those two because they don't have a thousand unnecessary mods (imo). The developer's taste will invariably be different than mine. For AOSP, CyanogenMod 10.1, my personal favorite. Been using 10-10.1 for months. All available on these forums. But for reference, stock roms can be found here: http://www.sammobile.com/firmware/?page=3&model=SGH-T999&pcode=TMB&os=1&type=1#firmware or mrRobinson's pre-rooted stock.
Hello xda,
I tried rooting my SGH-T999 and it took a while so I unplugged the USB and restarted the phone. Phone keeps saying it has encountered a problem with the current firmware, connect to KIES and select recovery. Kies does not connect to the device. I read on xda to reflash using ODIN. I have ODIN v1.85 from trying to root, is this the right version to use because I also found the ODIN3_v3.07? As far as USB driver, is there separate drivers for ODIN or are people referring to the Samsung Kies drivers (I just installed KIES). I read to do it on this screen and I also read to try to go into the recovery mode (holding vol down, home, power) and then reflashing; which should I do?
Also, I found this link on xda for the T-mobile firmware ( http://forum.xda-developers.com/showthread.php?t=1949687 ). No idea which one to choose, why are there so many, I am currently downloading the latest one
"UVDLJA
PDA: T999UVDLJA
CSC: T999TMBDLJA
Version: 4.1.1 JB
Date: Nov. 14, 2012
Sammobile Link
Samsung-Updates Link"
If I want to use the pre rooted file do I need to fix my problem first and try flashing with stock firmware or can I try to fix the issue directly with the pre rooted firmware?
Re: [Q] SGH-T999 Rooted bad, phone stuck on start screen
Use the Odin from my signature.
You can probably just flash mrRobinson's stock rooted rom to fix it. And Kies is garbage. Uninstall it.
I would like to see the root guide you used as well.
Aerowinder said:
Use the Odin from my signature.
You can probably just flash mrRobinson's stock rooted rom to fix it. And Kies is garbage. Uninstall it.
I would like to see the root guide you used as well.
Click to expand...
Click to collapse
I used this guide to root.
http://galaxys3root.com/galaxy-s3-r...gh-t999sgh-i747sph-l710-fail-proofnoob-proof/
Before I try to flash with mrRobinson's stock rooted rom which I just finished downloading, I will uninstall Kies and install the USB drivers first?
Thanks for your response Aerowinder.
I got USB drivers earlier today that was a newer version but I will be using the files from your sig since it works :good:
Another question I had was, does the phone need to be in download mode or can I do it in the screen where it says "encountered problem with current firmware. Connect to KIES and select recovery" screen when I flash with Odin? I know normally I would have to be in the download mode but I'm wondering if it is the same when I am getting this error.
Re: [Q] SGH-T999 Rooted bad, phone stuck on start screen
Phone must be in download mode to use Odin.
The drivers in my signature are not the newest, you are correct. They are the last version I found that work without any issues. The newer ones pretty much suck. Constant disconnects mainly.
Aerowinder said:
Phone must be in download mode to use Odin.
The drivers in my signature are not the newest, you are correct. They are the last version I found that work without any issues. The newer ones pretty much suck. Constant disconnects mainly.
Click to expand...
Click to collapse
Awesome thanks!
So I am watching the root video on your sig, so in my case I would choose the rom I want for the PDA instead of the cwm-touch-6.0.2.3-d2tmo right? Should I extract the rooted firmware or just load the zipped file onto ODIN PDA?
Re: [Q] SGH-T999 Rooted bad, phone stuck on start screen
Root66 does not contain a recovery so you still need to flash one of those but don't use my link. Get ROM Manager once you're up and running.
If you don't care about the flash counter you can flash the tar in my signature.
Sorry to interject here but you can get an Odin flashable recovery from here.
You can flash one of these and then flash Root66 right after and you'll have stock Rooted ROM with stock or custom recovery (your choice).
Not to be a buzzkill or anything but you are probably the 5th or 6th person in the past 2 weeks that have encountered the "encountered problem with current firmware. Connect to KIES and select recovery" error. Only a few of them have been able to pull out of it. The ones that have, have had to flash Root66 (or their device respective FW) multiple times.
I hope that you can get out of it and please post here if you do. Aerowinder knows what he is doing. Follow his lead.
Aerowinder said:
Root66 does not contain a recovery so you still need to flash one of those but don't use my link. Get ROM Manager once you're up and running.
If you don't care about the flash counter you can flash the tar in my signature.
Click to expand...
Click to collapse
Okay I don't care about the counter, I just want my phone to work and I'll be happy.
But now I'm getting a little confused about the cwm recovery.
So just to be clear, you are saying I need to flash a recovery (cwm-touch-6.0.2.3-d2tmo in my case since I don't care about the counter), BUT do I flash the recovery before or after I flash with Root66 firmware? That part I am confused about. And do I flash one right after another or do I need to restart my phone or ODIN first?
Thank you so much for helping me out. I was freaking out this morning and I am very grateful for your help and knowledge. I hope I am not being too much of a pain or hassle with these questions. Sorry that I am quite new to this
Woody said:
Sorry to interject here but you can get an Odin flashable recovery from here.
You can flash one of these and then flash Root66 right after and you'll have stock Rooted ROM with stock or custom recovery (your choice).
Not to be a buzzkill or anything but you are probably the 5th or 6th person in the past 2 weeks that have encountered the "encountered problem with current firmware. Connect to KIES and select recovery" error. Only a few of them have been able to pull out of it. The ones that have, have had to flash Root66 (or their device respective FW) multiple times.
I hope that you can get out of it and please post here if you do. Aerowinder knows what he is doing. Follow his lead.
Click to expand...
Click to collapse
Woody, I went to the link you posted. What are the 4 files for?
Don't use those - they are older versions.
If you don't care about the counter, then flash the CWM in my signature using Odin (can provide TWRP tar link if that's your thing), then flash root66 using Odin. You can reboot in between... but no real reason to do so.
If you are still having issues after you flash these, drop into recovery (vol up + home) and reset factory defaults. If still having problems, only thing left to do is flash a full stock image, link also in my signature. The page you linked to does not contain the newest version because DocHolliday hasn't been around here much lately.
buzzking00 said:
Woody, I went to the link you posted. What are the 4 files for?
Click to expand...
Click to collapse
Top one is TWRP version 2.3.0.0
Second is 6.0.1.2 CWR touch version
Third is TWRP version 2.3.1.0
Fourth is Stock recovery.
Do not flash all of them. Are you a TWRP or CWR kind of person? Instead of re-typing it out, go here and I come in on post #20 on the 2nd page. Read that to the end and let us know if you understand it. Pretty easy to follow but I understand your Panic Mode, so take your time.
Aerowinder said:
If still having problems, only thing left to do is flash a full stock image, link also in my signature.
Click to expand...
Click to collapse
^^ This is what I see in his future.
Like I said above, I haven't seen too many people get out of that "Encountered..." error without some real technical expertise.
Aerowinder said:
Don't use those - they are older versions.
If you don't care about the counter, then flash the CWM in my signature using Odin (can provide TWRP tar link if that's your thing), then flash root66 using Odin. You can reboot in between... but no real reason to do so.
If you are still having issues after you flash these, drop into recovery (vol up + home) and reset factory defaults. If still having problems, only thing left to do is flash a full stock image, link also in my signature. The page you linked to does not contain the newest version because DocHolliday hasn't been around here much lately.
Click to expand...
Click to collapse
Awesome. Thanks Aerowinder!
I will try this when I get home (assuming I can go into download mode...) and post what happened
Woody said:
^^ This is what I see in his future.
Like I said above, I haven't seen too many people get out of that "Encountered..." error without some real technical expertise.
Click to expand...
Click to collapse
I will take a look at the link Woody.
I am really hoping this will work on the first try!
Okay so from reading your post Woody I can use EITHER the TWRP and CWR, but I want to use the one that is easiest to use. Which one do you guys think is easier to use?
Also, SU3.3 or SU1.04 which one should I use? Aerowinder, your sig shows both now but earlier I didn't notice the SU1.04. I just realized I only need the SU file IF the prerooted file doesn't work but just in case it doesn't I guess it is better to know.
Draw straws. I use CWM/Superuser. I use Superuser because CM comes with it. AOKP comes with SuperSU... both work fine. Just make sure you use the ones from my signature, as they are newer versions. You won't need su if you get a prerooted rom, only for stock.
Aerowinder said:
Draw straws. I use CWM/Superuser. I use Superuser because CM comes with it. AOKP comes with SuperSU... both work fine. Just make sure you use the ones from my signature, as they are newer versions. You won't need su if you get a prerooted rom, only for stock.
Click to expand...
Click to collapse
I am going to try it in an hour.
Wish me luck!
1. Download mode
2. Flash CWM
3. Flash Root66
4. Hopefully no problems
:good:
Aerowinder said:
Don't use those - they are older versions.
If you don't care about the counter, then flash the CWM in my signature using Odin (can provide TWRP tar link if that's your thing), then flash root66 using Odin. You can reboot in between... but no real reason to do so.
If you are still having issues after you flash these, drop into recovery (vol up + home) and reset factory defaults. If still having problems, only thing left to do is flash a full stock image, link also in my signature. The page you linked to does not contain the newest version because DocHolliday hasn't been around here much lately.
Click to expand...
Click to collapse
OMFG OMFG OMFG
OMFG OMFG OMFG
OOOOOOH MYYYYYY FOOOOOOOOKIN GOOOOOOOOOOOOSH
AEROWINDER AND WOODY
I LOVE YOU SO MUCH
IT WORKED AND NOTHING GOT ERASED. I THOUGHT PUTTING THE NEW FIRMWARE WOULD'VE ERASED EVERYTHING WITH THE NEW ROM BUT NOPE.
Uninstalled KIES and USB drivers.
Installed USB drivers from Aerowinders sig
So the Odin 3.07 didn't work either so I ended up using ODIN 1.85
Turned off auto reboot and left f reset on (no idea what f reset does lol)
Flashed CWM
Flashed root66 rom
Restarted phone and it was back to normal with all the data saved, but no SU (wasn't unlocked)
So reflashed CWM
Then restarted in clockwork recovery and ran super user and now the phone is rooted
Thanks for your helpful knowledge and now I am going to learn everything about android so I too can help another new android user in the (hopefully near) future.
:good::good::good: 3 thumbs up to the knowledge members above Aerowinder and Woody!
THANK YOU!
Panic mode TRANSFORMMMMM! *Panic mode has now transformed into excitement mode*
buzzking00 said:
Thanks for your helpful knowledge and now I am going to learn everything about android so I too can help another new android user in the (hopefully near) future.
Click to expand...
Click to collapse
So, ahh, are you excited? Haha. Great. Glad you got it up and running.
I hope that you do learn more about Android and share it with someone who needs help someday. When I first came, that is what someone did for me and I have tried to do it ever since. We are all still learning, including Aero and myself, so there will never be an end but rather more.
Good job and now you should make a Nandroid backup just in case you ever get in a bind again.
Well now I gotta learn how to make back-ups and what a Nandroid backup is lol.
Time to search the forums
buzzking00 said:
Well now I gotta learn how to make back-ups and what a Nandroid backup is lol.
Time to search the forums
Click to expand...
Click to collapse
That's the attitude, with Android you have to be a sponge and try to learn as much as you can. A single Google search will give you the answers you seek and making a backup is pretty much universal no matter what Rom, phone you have. Good luck
Sent from my SGH-T999 using xda app-developers app
It seems that when I connect my phone to odin a com port opens. When I put my phone into recovery mode the com port does not open so odin does not see my phone. Yes I do have the phone in debug mode. Samsung drivers are in.
BigNoobee said:
It seems that when I connect my phone to odin a com port opens. When I put my phone into recovery mode the com port does not open so odin does not see my phone. Yes I do have the phone in debug mode. Samsung drivers are in.
Click to expand...
Click to collapse
Odin is used in download mode. Are you trying to use it in recovery mode?
Larry2999 said:
Odin is used in download mode. Are you trying to use it in recovery mode?
Click to expand...
Click to collapse
Trying to root the phone. Doesn't the phone need to be in recovery mode to root it?
BigNoobee said:
Trying to root the phone. Doesn't the phone need to be in recovery mode to root it?
Click to expand...
Click to collapse
Depending on your phone model and what method you are trying to use to root, you may need to flash SuperSU via recovery. This process does not, however, start in recovery. It starts with flashing custom recovery via Odin and then manually booting to recovery to flash the SuperSU zip. To flash a custom recovery via Odin, you would need to boot into download mode. There are other methods, of course, to root that do not require either download or recovery modes. What's the model of your phone and what firmware version are you on?
Have you tried flashing a pre-rooted ROM? You have an i747 or i747m?
Larry2999 said:
Depending on your phone model and what method you are trying to use to root, you may need to flash SuperSU via recovery. This process does not, however, start in recovery. It starts with flashing custom recovery via Odin and then manually booting to recovery to flash the SuperSU zip. To flash a custom recovery via Odin, you would need to boot into download mode. There are other methods, of course, to root that do not require either download or recovery modes. What's the model of your phone and what firmware version are you on?
Click to expand...
Click to collapse
The phone is a SGH-I747M ver. 4.3
I tried rooting based on a number of videos as to easily follow the process.
audit13 said:
Have you tried flashing a pre-rooted ROM? You have an i747 or i747m?
Click to expand...
Click to collapse
I have a i747m, The situation is that odin only opens the com port when the phone is in operating mode.
BigNoobee said:
It seems that when I connect my phone to odin a com port opens. When I put my phone into recovery mode the com port does not open so odin does not see my phone. Yes I do have the phone in debug mode. Samsung drivers are in.
Click to expand...
Click to collapse
I should have stated my goal. My goal is to put kitkat on my phone. After talking to my provider (petro mobility) on the Rogers network no upgrades are going to be provided and at the very least I need an s4 or better s5 to run kitkat. Also this information I was given is NOT official but only the opinion of an employee"s personal opinion, having worked for the company for some time. The phone is not supported in any way by petro mobility but is only running on the Rogers network. If any upgrades are made it will be by Rogers. Rogers will not say anything because I am not a Rogers customer.
To flash a Kit Kat ROM, you need to have a custom recovery installed on your phone.
You can load Philz Touch via Odin.You can flash the latest tar Philz d2lte from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte
Boot into download mode, put the Philz tar file in the PDA section of Odin, check nothing except auto reboot and F.Reset Time.
Boot into recovery mode and you will see that Phil has replaced the stock recovery.
You can copy a custom rom to your external micro SD card and flash it.
If you just want a rooted stock ROM, look here: http://forum.xda-developers.com/sho...tmctr=(not provided)&__utmv=-&__utmk=34317218
Warning: doing all of these things can soft or hard brick your phone. Make sure you read and understand everything before proceeding. The method I described worked my i747m with 4.1.2 and another i747m with 4.3. I cannot guarantee it will work for you.
audit13 said:
To flash a Kit Kat ROM, you need to have a custom recovery installed on your phone.
You can load Philz Touch via Odin.You can flash the latest tar Philz d2lte from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte
Boot into download mode, put the Philz tar file in the PDA section of Odin, check nothing except auto reboot and F.Reset Time.
Boot into recovery mode and you will see that Phil has replaced the stock recovery.
You can copy a custom rom to your external micro SD card and flash it.
If you just want a rooted stock ROM, look here: http://forum.xda-developers.com/sho...tmctr=(not provided)&__utmv=-&__utmk=34317218
Warning: doing all of these things can soft or hard brick your phone. Make sure you read and understand everything before proceeding. The method I described worked my i747m with 4.1.2 and another i747m with 4.3. I cannot guarantee it will work for you.
Click to expand...
Click to collapse
GREAT !!!! GREAT !!!:laugh: Sorry for Yelling It worked for me ThanX
My next step is to go get Rom Manager from the app store...watching their video now on Rom Manager.. Very high learning curve for me- hope I don't brick the phone ....
BigNoobee said:
GREAT !!!! GREAT !!!:laugh: Sorry for Yelling It worked for me ThanX
My next step is to go get Rom Manager from the app store...watching their video now on Rom Manager.. Very high learning curve for me- hope I don't brick the phone ....
Click to expand...
Click to collapse
Now you have custom recovery, you can flash a Kit-Kat based custom ROM. There is, of course, a difference between a Kit-Kat based custom ROM and official Kit-Kat 4.4. We have information and I'm sure they are reliable enough, that Kit-Kat 4.4 will be rolled out for Samsung GS III and all its variants including the i747U/M. The expectation has, however, been on for some time and no one really knows when and if. If you are using a custom ROM, you will not be able to get OTA updates for official firmware if the official version is rolled out but manual updates will still be possible, thanks to the development community.
BigNoobee said:
GREAT !!!! GREAT !!!:laugh: Sorry for Yelling It worked for me ThanX
My next step is to go get Rom Manager from the app store...watching their video now on Rom Manager.. Very high learning curve for me- hope I don't brick the phone ....
Click to expand...
Click to collapse
I don't personally use ROM Manager as I find it redundant. Now that you have Philz which can flash pretty much any KK ROM, you can just stick with using Philz to flash.
I like the Validus ROM on the i747m. I find it works well and has great battery life and performance.
BTW, you do not need to root in order to flash a custom ROM.