Hey,
So I just finished creating an animable android in C4D ( first time using it ). I was wondering if there is someone who could give me some advice on how to optimize it to make it easier to animate?
I can send you the project. Just don't steal it! I mean, if you want to use it just ask me
if antibody want to make a boot animation with me it would be nice! I'm a cameraman so I'm used to AE but I'm a begginer with C4D.
Sent from my SGH-i747, AOKP+KT747, 96-2106mhz, SIO, PegasusQ, 3150mAh battery.
Related
Hi Modders and developers! I have noticed that the kernel of hero is locked so technically overclock widget and setcpu don't work on it! I was wondering if some of you can remove the perf locks from the kernel and compile a new kernel which can be used with setcpu and overclocked to liking! I know this is hard but please give it a try! Millions of hero users will be thankful to you! Thanks!
It's been discussed many times, as I understand once 2.1 is released the kernel source will soon follow, there's no point doing the work until we have it.
Well Lox released a beta kernel a while back for 1.5 firmware rom's to do this...
It was a beta release but here is the link anyway:
http://android.modaco.com/content/htc-hero-hero-modaco-com/302182/beta-run-your-hero-at-660mhz/
Sure it was discussed there were no noticeable improvements.
maxo64 was able to tweak it to run at 528mhz with screen on and 2** with screen off! so can any one of you change those while compiling a rom?
i searched every where but the only kernels that work with setcpu and actually allow you to overtweak and down tweak are for cdma hero! CDMA! please develop one for gsm hero.....
I second your motion! Was thinking of starting a thread with the same question...Would love to be able to down tweak to 192MHz when screen is off, or maybe even lower.
Sent from my HTC Hero using Tapatalk
htb2050 said:
maxo64 was able to tweak it to run at 528mhz with screen on and 2** with screen off! so can any one of you change those while compiling a rom?
Click to expand...
Click to collapse
Hello,
setcpu and overclockwidget not work correctly, but with overclockwidget I see actual cpu freq., and if I "sleep" phone, freq. go down (24x) - if you very very quickly unlock screen, you ca see this.
I try this with VillainROM5,22 and Androbin1,111x.
htb2050 said:
Hi Modders and developers! I have noticed that the kernel of hero is locked so technically overclock widget and setcpu don't work on it! I was wondering if some of you can remove the perf locks from the kernel and compile a new kernel which can be used with setcpu and overclocked to liking! I know this is hard but please give it a try! Millions of hero users will be thankful to you! Thanks!
Click to expand...
Click to collapse
Been done in aHero http://forum.xda-developers.com/showthread.php?t=638584
Probably wont be long before it is done in others, but you may have to request it from your dev.
Im using HTC WILDFIRE - ROOTED - REVOLUTIONARY - CM 7.1.0.1 ANDROID 2.3.7.... But wen i use "setcpu" to overclock my CPU, i cannot oc above 691 Mhz.. i want to use 768 Mhz, so that i can run games smoothly... Please give me sloution to overclock above 768 Mhz...
Also suggest me a recent good ROM, now im using cm 7.1.0.1, PLease suggest me recent ROM that will work fine for games and can overclock to maximum...
balaedge said:
Im using HTC WILDFIRE - ROOTED - REVOLUTIONARY - CM 7.1.0.1 ANDROID 2.3.7.... But wen i use "setcpu" to overclock my CPU, i cannot oc above 691 Mhz.. i want to use 768 Mhz, so that i can run games smoothly... Please give me sloution to overclock above 768 Mhz...
Also suggest me a recent good ROM, now im using cm 7.1.0.1, PLease suggest me recent ROM that will work fine for games and can overclock to maximum...
Click to expand...
Click to collapse
Brother this is 3rd time i am replying you in this topic..
I have already suggest you too keep min 352 and Max 710 in setcpu which is very much stable for me...
If your phone is not supporting the overclocking more than 691 than you can flash a new kernel (may help).
You can use InfinityPlay from here
Make sure to take a nandroid...
and one thing whatever you do it will be sole responsibility of yours so read before doing anything..
I think the above explanations will help you...
Press Thanks if I helped you...
Shiv Prajapati said:
Brother this is 3rd time i am replying you in this topic..
I have already suggest you too keep min 352 and Max 710 in setcpu which is very much stable for me...
If your phone is not supporting the overclocking more than 691 than you can flash a new kernel (may help).
You can use InfinityPlay from here
Make sure to take a nandroid...
and one thing whatever you do it will be sole responsibility of yours so read before doing anything..
I think the above explanations will help you...
Press Thanks if I helped you...
Click to expand...
Click to collapse
Thanks a lot brother, I downloaded the kernal hcdr v4.... And i dont know how to flash it... PLease say how to do that..
balaedge said:
Thanks a lot brother, I downloaded the kernal hcdr v4.... And i dont know how to flash it... PLease say how to do that..
Click to expand...
Click to collapse
I have given you a link for InfinityPlay Kernel...to flash HCDR kernel You have to flash it via recovery 2.5.X.X
I suggest you to buy another phone. Stop waiting for magic from buzz lol.
Sent from my HTC Wildfire using Tapatalk
I use scaling on demand 480-710 and it works fine : )
i run games fine on 652MHz, any higher and my launcher becomes jumpy and the system is just loose and unstable. Plus I see massive decrements in battery life at higher clock speeds.
Really u dont want to clock ur buzz higher than 700MHz - the battery and CPU will get too hot as there arent any cooling capabilities in a phone. If u want to game seriously buy a phone with a better processor if u want higher speeds than that.
Hello people !
First a Fall , I am a member since a long time here , but never used to interact as i had jumped off the android bandwagon . Now i am back with a band with my new purchase of a really Awesome Samsung S3 :fingers-crossed:
i need Some help from you guys for a project i am writing .
I am writing on how under-clocking and over clocking an android SmartPhone would affect its hardware & software. mainly Focusing on How would the changed affect its performance , Stability and Battery life . And finally arriving at an optimum clock speed and if possible and algorithm to finding that optimum clock speed if its there .
Click to expand...
Click to collapse
I had an xperia play which i as using a long time back . its working perfectly fine . I decided to use it as i know the risks of over-clocking and how it may be dangerous to use on my primary phone atm .
All i am asking you guys is how can i go about this ? what all do i need to do to change the clock speed of my play ?
what apps can help me measure the battery life , stability and perfomance cahnges ?
basically please help me in anyway you can !
i will credit everyone in my study who helps :victory:
lets see the starrt of a great project !
hackerevan said:
Hello people !
First a Fall , I am a member since a long time here , but never used to interact as i had jumped off the android bandwagon . Now i am back with a band with my new purchase of a really Awesome Samsung S3 :fingers-crossed:
i need Some help from you guys for a project i am writing .
I had an xperia play which i as using a long time back . its working perfectly fine . I decided to use it as i know the risks of over-clocking and how it may be dangerous to use on my primary phone atm .
All i am asking you guys is how can i go about this ? what all do i need to do to change the clock speed of my play ?
what apps can help me measure the battery life , stability and perfomance cahnges ?
basically please help me in anyway you can !
i will credit everyone in my study who helps :victory:
lets see the starrt of a great project !
Click to expand...
Click to collapse
To over clock or vice versa, you need to have a custom kernel that allows it. A custom ROM is also good, but not always needed, but it is suggested Some apps on the market have over clocking abilities but an over clocking kernel is needed that is compatible. Also those apps have a kernel, but is specific to some devices. But go to your device's forums and find a kernel that has over clocking abilities then flash it. Some apps just allow you to over clock to the SET speeds of the kernel being used. Also for battery life, I suggest you use betterbattery stats on the market.
Sent from my SGH-T959 using xda app-developers app
SO which config would be the best ?
hey Thanks for your help bro !
considering i am already in the forums for my device , can someone recommend the best kernel and the best rom to install ?
And how do i go about installing it ?
PLease keep in mind it should be able to support maximum over clocking and underclocking .
Thanks !
Underclocking is doable with just root access, which can be obtained by using ZergRush. This will only work on firmware 4.0.2.A.0.58 or lower.
For overclocking, I would recommend DooMKerneL which requires an unlocked bootloader. It supports frequencies of 134MHz to 2GHz, though I think the stock kernel can go down to 122MHz or 128MHz or something (DooM changed the frequency table in his kernel).
To test the stability of your phone after overclocking, you can run stress tests with StabilityTest. Underclocking will not change the stability of the phone, it'll just make it slower.
My favorite ROM is Gin2JB, although anything stock-gingerbread-based should work just as well.
For testing performance, I recommend AnTuTu
Thanks again
Thanks for your help !
Now one question , does doomkernel have inbuilt over clocking and under clocking ?
also as you said it resitricts the underclocking to 134 Mhz but the stock goes to 122 Mhz . isnt thier a way to make this one also go the lowest possible value?
and what about the Adreno 205 @ 245 MHz GPU that the play has .. can we overclock underclock that somehow ?
Thanks again
Yes overclocking capability is built into DooMKerneL, and of course underclocking. You'd have to talk to DooM about putting in lower frequencies if you want anything lower than 134MHz in his kernel. He tried overclocking the GPU at one point, but it oddly gave worse performance in a blind-test so he removed it.
While we're one the subject of over clocking, you NEED an app like SetCPU to overclock right? Just wanna make sure DooMkernel isn't already set to 2.ghz. Yeah probably a noob question...
Xperia Player said:
While we're one the subject of over clocking, you NEED an app like SetCPU to overclock right? Just wanna make sure DooMkernel isn't already set to 2.ghz. Yeah probably a noob question...
Click to expand...
Click to collapse
Yes, you need an overclocking app. I think it defaults to Min:249Mhz Max:1017MHz. The Min might be lower, dunno. The Max definitely is 1017MHz (1GHZ) until you specifically tell it to overclock though
I would like it if theres a kernel that ALSO allows to underclock and overclock teh GPU AND CPU .
Otherwise i take it , Doom is the best to go forward with right ?
Can I under volt on cm10.1 ?
I have installed greenify but to be honest there us not much to freeze
IM+ watsapp and tapatalk and teewtcaster pro those are my most " demanding" apps
If I use any of them the battery life goes down at a rate of 1% per 2-3 minutes
The screen is close to the minimum
Also how do you change the IO scheduler mine is on cfq but regardless of what I press does not change any suggestions ?
Thanks in advance
I use an Arc S but I underclock it to 1GHz. The ROM does not lag.
Did you check the box that allows you to keep the settings at boot?
僕のLT18iから送られてきた
Hello
I have an arc S lti 18
That us the issue i cannit change it so if I press sio for example gets back to cfq so no way to set it on boot because it reverts back
As for undervolt I had a uv file that i used on lupus ICS which helped m to keep the phone runnkng with very low use of battery But not sure if will work on this i can pm you the file if you want to review it
There are plenty of apps, which can do the undervolting, look in Play Store. SetCPU, SetXperia + many others.
According to the kernel status for LegacyXperia CM10.1, then the undervolting should be possible.
Thank you
Any in particular you would recommend ?
Rapsody10 said:
Thank you
Any in particular you would recommend ?
Click to expand...
Click to collapse
I have only used these 2, in the end, you will have to choose, which you wish to use.
I have downloaded set Xperia but there is no change on the IOSheduler
I am attaching screenshotsany advice will be appreciated
Thanks in advance
Raps
Please, please, please don't say dyn.kernel. Is there anything else yet? Seemed we were kernel starved before on v500, but maybe some kernels work now from GPE? Please help, heading on trip tomorrow and wanna maximize battery as much as possible. TIA!
tekka-maki said:
Please, please, please don't say dyn.kernel. Is there anything else yet? Seemed we were kernel starved before on v500, but maybe some kernels work now from GPE? Please help, heading on trip tomorrow and wanna maximize battery as much as possible. TIA!
Click to expand...
Click to collapse
My setup
Redkernel 007
undervolt at 700mv at 386mhr
Inteliactive governor
inteliplug for hotplug
fiops for i/o at 512
Looks like a hot ticket, thank you!
can you take a screenshot of your synapse cpu volt page for me? ty
Mani kernel has better gamma default already configured (no tweeking needed) in the zip file ( if you are particular about gamma and brightness).