Related
ok, i searched for the problem i had but couldnt find anything relevant. i hope someone can direct me to it, if there is any already, or give me an answer,
i downloaded Setcpu and ive seen most of people using "conservative" scaling for better battery life, but i dont see that option in the app. i just see ondemand, userspace and performance.
any idea if im doing something wrong?
and also i would appreciate if someone can tell me the settings for longer battery life? wanted to try it but didnt understand that much.
thanks.
btw im using virus rom rc3 with stock kernel.
The governors are kernel specific- if the kernel doesn't support it, it won't show up as an option. In your case, conservative scaling is not supported by the kernel you are using.
_MetalHead_ said:
The governors are kernel specific- if the kernel doesn't support it, it won't show up as an option. In your case, conservative scaling is not supported by the kernel you are using.
Click to expand...
Click to collapse
oh ok. now i got it. thanks for the info.
Both Netarchy and Kings kernels have "conservative" governors on them. One of the top ways to conserve battery is to make a profile setting for Screen Off where you set the min and max freq to the lowest possible setting. For me though I can go to 128 Mhz, I get too much lag on wake-up and therefore set to 384. Your phone may do better.
Someone also made a thread that describes the advanced settings. Tweaking those can also improve battery life as well.
Sent from my PC36100 using XDA App
sombdy said:
Both Netarchy and Kings kernels have "conservative" governors on them. One of the top ways to conserve battery is to make a profile setting for Screen Off where you set the min and max freq to the lowest possible setting. For me though I can go to 128 Mhz, I get too much lag on wake-up and therefore set to 384. Your phone may do better.
Someone also made a thread that describes the advanced settings. Tweaking those can also improve battery life as well.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
appreciate it.. thanks ..
I'm kinda new to this frequencies thingy... can someone enlighten me about this? currently trying 2 different cpu control, antutu and no-frills? which is better? and also what are the basics that i need to know before doing anything? like min freq. max freq? also the governor? and sometimes i can see on other threads about voltage? what's that for? sorry for my questions, tried to search the forum but did not find an exact explanation...
You need firs a kernel that suports UV (like fauxs kernel and francos new r10 kernel) ... faux recomands (and as far as i know its the only app that works properly with his kernel) THIS, and franco recomand HIS app
no frills give it a miss.. frequencies do not stick. for faux use system tuner and for franco use his app. hell i am pretty sure you can use franco's app with faux one as well
Thanks for the info... Will check those... Im using sweep2wake franco from Renovate rom? Is it usable? And also. If i will set my max frequency to a lower number will it give me morw battery life in exchange of performance?
Sent from my HTC One X
mikey0105 said:
Thanks for the info... Will check those... Im using sweep2wake franco from Renovate rom? Is it usable? And also. If i will set my max frequency to a lower number will it give me morw battery life in exchange of performance?
Sent from my HTC One X
Click to expand...
Click to collapse
if you are using s2w franco kernel you are not going to get any help from franco as he did not compile that kernel..you are better off downloading and flashing his latest release r10
so if you are going to flash r10 then use franco's app and you should be good to go..let me know how you get on cause i am to busy right now to try stuff
mikey0105 said:
Thanks for the info... Will check those... Im using sweep2wake franco from Renovate rom? Is it usable? And also. If i will set my max frequency to a lower number will it give me morw battery life in exchange of performance?
Sent from my HTC One X
Click to expand...
Click to collapse
I am not sure that changing the frequencies will give you any battery improvements ... for that use undervolting ... undervolt your device for -100 (that is stable for everyone) or -125 (just stable for some guys)
muamers said:
I am not sure that changing the frequencies will give you any battery improvements ... for that use undervolting ... undervolt your device for -100 (that is stable for everyone) or -125 (just stable for some guys)
Click to expand...
Click to collapse
That undervolting... Does it give us battery life?
Goku80 said:
if you are using s2w franco kernel you are not going to get any help from franco as he did not compile that kernel..you are better off downloading and flashing his latest release r10
so if you are going to flash r10 then use franco's app and you should be good to go..let me know how you get on cause i am to busy right now to try stuff
Click to expand...
Click to collapse
Will download it a bit later and will give you a feedback
Sent from my HTC One X
I'm quite happy with the stock ROM. Is it possible to overclock it? Do I just need to install a overclockable kernel? Will I lose any functionality due to bugs/etc? What's the most reliable kernel for O/C?
Thanks,
Nick
It is possible to OC it only via a custom kernel.............so i recommend that you try the Dust kernel by einstein.frat
Yea he's right. what you need is only being rooted and recovery for flashing kernel..and of course a program which controls your cpu such as setcpu..
i recommend you kernel that cm7 used with last update. it supports 864mhz even and with no stuck( and battery drain )if you search for it on xda i am sure you will find..
valerosso said:
Yea he's right. what you need is only being rooted and recovery for flashing kernel..and of course a program which controls your cpu such as setcpu..
i recommend you kernel that cm7 used with last update. it supports 864mhz even and with no stuck( and battery drain )if you search for it on xda i am sure you will find..
Click to expand...
Click to collapse
In any way......DO NOT use the CM7 kernel...........an AOSP kernel is a bit different from the Stock(sense) one.................................it won't work
Thanks all. It looks like I'll give the dust kernel a try.
Are there preset CPU MHz settings for overclocking or is any integer value allowable? Most of the overclocking threads talk about 768Mhz, 806Mhz. My guess it's probably constrained by some clock multiplier factor.
oww i am happy to learn that
Plzzz reply which wills sbe the best overclock kernel for stock miui 12
This is kylon's AndromadusMod kernel, originally for Saga / Desire S, but compiled by me from source for our Vision. Massive thanks to the Andromadus team and to kylon for his awesome mods. Built with the Linaro toolchain.
From kylon's original thread:
Code:
Only experimental [COLOR="Red"] (=)[/COLOR]
Features:
sync with Andromadus: Apr 17 2013
Gov: intellidemand, dyn interactive, conservative, ondemand, userspace, powersave, ondemandx, performance, smartassH3
Sched: noop, deadline, row, cfq, bfq, sio
Overclock up to 2.0Ghz (=)
Cpu aligned access
ext4 optimizations
LZO kernel compression
KMS
SLUB allocator(default) with some optimizations
dynamic file sync (=)
UnderVolt / OverVolt
The kernel is already uved (post #3 )
vmstat, MM, shmem updated to linux 3.4
Tweaked gov and scheduler to work better on android
some optimizations here and there
expire time about each entry of scan results: 15 *Hz
force AC charger for unknown chargers(like carKit)
ck1 patchset
enabled clean cache
enabled zRam
NLS-UTF8
enabled power collapse to save battery(?)
Removed almost any debug message to improve the performances
USB OTG (=)
NTFS r/w (=)
CIFS (=)
Power saving when the wifi is off
More RAM for us
what i forgot..
Bugs:
Same as Stock Andromadus
USB otg: usb sticks are not working
Click to expand...
Click to collapse
I know USB otg definitely won't work, and at the moment I haven't used LZO kernel compression. I'm not sure if there will be "more RAM for us", being as the original kernel was for the Saga, which had more RAM in the first place. Other than that, all the visible changes, such as governors, I/O schedulers, OV/ UV, etc., appear to be working.
Downloads:
At the bottom of the post you can find the flashable zip, I have also attached the original Andromadus 3.x kernel (Original.zip) in case you want to revert, the only thing I've changed about this is I've added CPU idle PM support, this should help with battery life but it's nothing drastic, and other than that I've left it alone.
Changelog from original thread, red changes are mine:
Changelog:
Code:
[COLOR="red"]27/04
First build for Vision.[/COLOR]
25/04
sync with Andromadus
3.0.74
10/04
sync with Andromadus
3.0.72
Added LZ4/LZ4HC kernel compression(disabled for now, the zImage cannot be flashed)
Now LZO kernel compression(Hope it will help the reboot a bit)
No debug msges for the camera
04/04
sync with Andromadus
3.0.71
Added a tweak that should help to save some RAM
17/03
sync with Andromadus
3.0.69
08/03
sync with Andromadus
3.0.68
added more freqs
added 1.9Ghz and 2.0Ghz (exp)
Overvolt up to 1600
compiled with linaro 13/02
25/02
sync with Andromadus
3.0.66
tweaked bfq
prevent a possible crash on suspend/resume event
17/02
sync with Andromadus
3.0.64
power saving when the wifi is off
08/02
stability fix
minor changes(see github)
05/02
Sync with andromadus
3.0.62
USB OTG enabled and working(Only experimental)
NTFS r/w(Only experimental)
CIFS(Only experimental)
New Gov. SmartassH3
a few improvements(see github for a full changelog)
19/01
Sync with andromadus
18/01
sync with andromadus
linux 3.0.59
updated the android logger to linux 3.8
new voltage for 1.2Ghz (test) - 1.2 should not be higher than 1.3
more robust compaction
less modules
minor changes
13/01
forgot to upload this version, sorry (my real life is an hell)
added ck1 and dynamic file sync
OverVolt up to 1550
Click to expand...
Click to collapse
Credits from original thread:
Credits:
Flinny- Help with my first compile
Andromadus TM- the kernel
thewadegeek- Help with some compile errors
Fraux123- His dynamic file sync and more
ziggy- ck1 patchset
H3ros- smartassH3
engelmarkus- USB OTG(http://forum.xda-developers.com/show....php?t=1887073)
and Who i forgot..
Click to expand...
Click to collapse
Credits:
The Andromadus team for all their amazing work
kylon, for letting me release this kernel for you, and also for helping me with compiling and everything else!
Linaro, for their fantastic toolchain
All the above
RESERVED
reserved
Great Job! ill for sure be testing this out!
Thank you so much, this kernel looks very promising, will definitely test it out.
Update: It doesn't feel as fast as the original kernel, however the Mod kernel does give me 1MB(one) of additional user accessible RAM.
This could be flash over the 10.1 Andro or on the 4.2.2 AOSP?
Thanks
Kéno40 said:
This could be flash over the 10.1 Andro or on the 4.2.2 AOSP?
Thanks
Click to expand...
Click to collapse
It's originally for CM10.1, so I doubt it'll work with AOSP, especially due to the nature of the test builds (for this reason it's probably not compatible with build 20 or below either). That said, it's worth a try. I don't know if there are any mods of the AOSP kernel, I haven't got much experience so I probably couldn't mod it myself, but I'll look into it
sharptv said:
Thank you so much, this kernel looks very promising, will definitely test it out.
Update: It doesn't feel as fast as the original kernel, however the Mod kernel does give me 1MB(one) of additional user accessible RAM.
Click to expand...
Click to collapse
Thanks for the feedback, I would try out some of the included governors, there's quite a few! I personally find dyninteractive more responsive and smoother than the default SmartassH3.
HTCDreamOn said:
It's originally for CM10.1, so I doubt it'll work with AOSP, especially due to the nature of the test builds (for this reason it's probably not compatible with build 20 or below either). That said, it's worth a try. I don't know if there are any mods of the AOSP kernel, I haven't got much experience so I probably couldn't mod it myself, but I'll look into it
Thanks for the feedback, I would try out some of the included governors, there's quite a few! I personally find dyninteractive more responsive and smoother than the default SmartassH3.
Click to expand...
Click to collapse
I tried both kernels on perf governor like i always do, and the Mod kernel i significantly slower, for me at least. I suspect that it's due to the LZO compression.
Anyway, it's good to see another kernel Dev, i really appreciate your work and i look for ward to your next release.
good work:good:
if you need help just pm me and i ll try to help you as best as i can (even if i m a still a noob xD )
sharptv said:
I tried both kernels on perf governor like i always do, and the Mod kernel i significantly slower, for me at least. I suspect that it's due to the LZO compression.
Anyway, it's good to see another kernel Dev, i really appreciate your work and i look for ward to your next release.
Click to expand...
Click to collapse
He said this kernel is not using lzo and i don t think the kernel compression can affect the performances
it can only affect the boot/reboot/shutdown time
"more ram for us" is working because it is a generic tweak, every kernel/phone can have it
kylon said:
good work:good:
if you need help just pm me and i ll try to help you as best as i can (even if i m a still a noob xD )
He said this kernel is not using lzo and i don t think the kernel compression can affect the performances
it can only affect the boot/reboot/shutdown time
"more ram for us" is working because it is a generic tweak, every kernel/phone can have it
Click to expand...
Click to collapse
Thanks for pointing that out. I have reverted to the original kernel as the Mod kernel is really slow in comparison. The original kernel with the added CPU idle PM support has significantly increased my battery life.
sharptv said:
Thanks for pointing that out. I have reverted to the original kernel as the Mod kernel is really slow in comparison. The original kernel with the added CPU idle PM support has significantly increased my battery life.
Click to expand...
Click to collapse
That's an interesting point.
@HTCDreamOn, could you please share how did you enable that CPU idle PM feature?
sharptv said:
Thanks for pointing that out. I have reverted to the original kernel as the Mod kernel is really slow in comparison. The original kernel with the added CPU idle PM support has significantly increased my battery life.
Click to expand...
Click to collapse
NeverGone\RU said:
That's an interesting point.
@HTCDreamOn, could you please share how did you enable that CPU idle PM feature?
Click to expand...
Click to collapse
That's interesting :silly: not gonna lie, I didn't realise it would actually make a difference. In menuconfig, under CPU Power Management there's an option for CPU idle PM, right next to the Governor bit.
I'm personally finding the kernel alright in terms of speed, I guess I could try the latest Linaro tool chain and/ or look into some other kernel stuff, although I'm hardly an expert
HTCDreamOn said:
That's interesting :silly: not gonna lie, I didn't realise it would actually make a difference. In menuconfig, under CPU Power Management there's an option for CPU idle PM, right next to the Governor bit.
I'm personally finding the kernel alright in terms of speed, I guess I could try the latest Linaro tool chain and/ or look into some other kernel stuff, although I'm hardly an expert
Click to expand...
Click to collapse
Also, just to point it out. I think you have accidentally packed the Original kernel inside the Mod package.
Anyway, i'm looking forward to your next release, this kernel looks very promising, i think it just needs to be polished.
sharptv said:
Also, just to point it out. I think you have accidentally packed the Original kernel inside the Mod package.
Anyway, i'm looking forward to your next release, this kernel looks very promising, i think it just needs to be polished.
Click to expand...
Click to collapse
can't of done, the AndromadusMod is double the size of the original so I've definitely got them the right way round. thanks for the feedback though
Great Job!
sharptv said:
Also, just to point it out. I think you have accidentally packed the Original kernel inside the Mod package.
Anyway, i'm looking forward to your next release, this kernel looks very promising, i think it just needs to be polished.
Click to expand...
Click to collapse
You are right, inside the modded kernel update.zip you will also find another update.zip, wont do anything but just is why the package is so much bigger!
HTCDreamOn said:
can't of done, the AndromadusMod is double the size of the original so I've definitely got them the right way round. thanks for the feedback though
Click to expand...
Click to collapse
I was about to give the same answer but i see what he means, at first i was like how could it be double *scratches head* then i see you have two kernels packed into one! no bigge!
oh and so far nice performance running smartassH3, this is great stuff!!!
i just got done adding into the aroma installer if anyone would prefer, found here
http://forum.xda-developers.com/showthread.php?t=2194964
will be there from build 1.5.2 and beyond so happy flashing fellas!!
demkantor said:
You are right, inside the modded kernel update.zip you will also find another update.zip, wont do anything but just is why the package is so much bigger!
I was about to give the same answer but i see what he means, at first i was like how could it be double *scratches head* then i see you have two kernels packed into one! no bigge!
oh and so far nice performance running smartassH3, this is great stuff!!!
i just got done adding into the aroma installer if anyone would prefer, found here
http://forum.xda-developers.com/showthread.php?t=2194964
will be there from build 1.5.2 and beyond so happy flashing fellas!!
Click to expand...
Click to collapse
Oops my bad, must've been 'cause I packed it using terminal, and must have left the normal kernel.zip in the same directory. I'll try the new Aroma ASAP!
HTCDreamOn said:
Oops my bad, must've been 'cause I packed it using terminal, and must have left the normal kernel.zip in the same directory. I'll try the new Aroma ASAP!
Click to expand...
Click to collapse
Just to point out one more thing: I'm definitely getting stronger WiFi signal with the Mod kernel, I'm also getting less disconnects when using 802.1x networks.
I am gonna do a full wipe and try this kernel again, and hopefully i will get the speed advantage this kernel technically should offer me.
P.S would you be kind enough to compile the original kernel with CPU PM idle support and also force ac charge? Thanks SOOOO much in advance.
sharptv said:
Just to point out one more thing: I'm definitely getting stronger WiFi signal with the Mod kernel, I'm also getting less disconnects when using 802.1x networks.
I am gonna do a full wipe and try this kernel again, and hopefully i will get the speed advantage this kernel technically should offer me.
P.S would you be kind enough to compile the original kernel with CPU PM idle support and also force ac charge? Thanks SOOOO much in advance.
Click to expand...
Click to collapse
It already has CPU Idle PM support and I'll look into Force AC charge.
HTCDreamOn said:
That's interesting :silly: not gonna lie, I didn't realise it would actually make a difference. In menuconfig, under CPU Power Management there's an option for CPU idle PM, right next to the Governor bit.
I'm personally finding the kernel alright in terms of speed, I guess I could try the latest Linaro tool chain and/ or look into some other kernel stuff, although I'm hardly an expert
Click to expand...
Click to collapse
i can't understand how to enable cpu idle PM
zofox said:
i can't understand how to enable cpu idle PM
Click to expand...
Click to collapse
Haha no you don't need to, it's something I enabled in the kernel before compiling. You will only notice a difference when the device is sleeping, so try leaving your phone on (aeroplane mode if possible) overnight, and you should notice very small battery drain. Basically you don't need to do anything
===>INTRODUCTION<===
This is my personal kernel based off of ASKP. I cherry-picked a lot of custom commits from many big kernels. I'm new in development, so, any help whatsoever (commits, suggestions, logs, etc etc) would be greatly appreciated
releases will be as frequent as possible, as I'm gone for 7 hours of my day during weekdays.
****FEATURES****
using A.S.K.P as the base<- you get all the features of A.S.K.P+ more
linux kernel 3.101 WITH the Con kalivas patchset for improved performance
L3 cache overclock (116MHZ)
custom RAM OC setup (333MHZ/400MHZ/466MHZ)
gpu oc interface (307/384/512)
optimized CRC32 computing algorithem
optimized square root interger library
custom voltage setup,modified by me personally taking inspiration from the voltage's of other kernels,everything from the GPU voltage to the screen regulator has been tweaked
CPU overclock up to 1.7GHZ
multiple governors i have personally added (this is ALWAYS changing considering what jhonny/grarak/faux/bsmitty/Amperific/boype do to their governor,or what i personally decide to do)
some new IO schedulers have been added
EXFAT is added, 1.2.5 source from dorimanx
updated RWSEM to linux 3.14
numerous enhancements to SLUB including a update to the 3.3 version
MMC software updates/enhancements
GPU side enhancements
HUGEMEM setup (this is a arguement from me personally,the gnex is only a 720P phone,you cannot utilize 1080P with out screen,so even if this is a retarded and dirty hack,i want to use the extra available ram)
ALL kernel logging has been disabled for a increase in speed
Kernel SamePage merging has been updated to linux 3.6 standards with faux's check page patch for improved performance and efficiency
memory Compaction updates for better performance
modified screen colors
imsoyen's SmartReflex 1.5 tuning interface
updated thermal framework drivers from faux & omapzoom
updated android binder.c from omapzoom's 3.8 branch that bsmitty discovered
updated logger from poondog,linux 3.9
graphite and link time optimizations including -o3 and hard float point with NEON with the latest linaro 4,9.1 toolchain from christopher83,compiled with graphite ops on gpu code along with -o3
zcache,zsmalloc and zram updated to linux 3.11 from mpokang kernel with faux's setup for zram
many misc enhancements from AK kernel
many misc OMAP enhancements
the latest WIFI drivers WITH a working hotspot
a modified anykernel zip package that will install a new HOSTAPD binary for working wifi hotspot and new meda_profiles.xml to fully disable 108PTHIS KERNEL USES VERY HIGH CLOCK SPEEDS WITH VERY LOW VOLTAGES,I BUILD THIS KERNEL THROUGH A "PERSONAL" SETUP,IF YOU GET SOD'S/ FREEZES,PLEASE UP YOUR VOLTAGES ON "MPU" BY 25 UNTIL THEY STOP :3
IF YOU'RE GOING TO USE A HOTPLUG GOVERNOR, FOR ALL THAT IS HOLY DO NOT USE MULTICORE POWER SAVING WITH IT. THIS CAUSES ISSUES AND NO BUG REPORTS ARE ALLOWED IF YOU HAVE HOTPLUG WITH MCPS
BUILDS:http://patty.mbqdevelopment.com/Kernels/ASKP Remix/ <- the numbers are going to be in order,the bigger the better XD (thanks to mbq for the generous hosting site,or as i like to call him,"big brother" thanks man :good: )
-------------------------------------------------------------------------------------------------------------------------
ALL CREDITS TO THE FOLLOWING
bsmitty83 <- i seriously use all of his commits that i possibly can,go thank him when you get the chance and try his kernel!
franciscofranco<-franco is franco. you all know what he can do.
amperific<i used his kernel for a base,without him,this wouldnt be here :good: give the original a shot when you get the chance!its much cleaner
grarak<lots of his fixes,and thanks to him ive learned alot
Ezekeel<ezekeel. nothing else needed.
tFrost<his great Rom Directory app that can download kernel updates (http://forum.xda-developers.com/gal...ctory-3-14-t2681305/post51078192#post51078192)
burstlam<i use his backports all through the kernel
edoko<alot of his air kernel stuffs helped this kernel alot
faux123<its faux.
ak<he has ALOT of code in this kernel.
imoseyon<interactive x
metalspring<his toolchain is bomb :good:
morfic<color controls
boype<its boype,nothing less to say.
aosp<mr smarty pants
pianistaPL (he wrote most of the original OP for me)
milojoseph (he told me to make the thread)
MBQ_ (his music takes headaches away) ((https://soundcloud.com/mbq-1)) (((he re-wrote the OP for me for spelling fixes and organization)))
poondog (used alot of his stuff for memory)
jhonnyx<-i use every commit of his that works
you! the users! for testing and adding ideas!
and many many more!
GITHUB: https://github.com/pattyboi/kernel_tuna/
CHANGELOG: https://github.com/pattyboi/kernel_tuna/commits/milestone[/CENTER]
good to know you're working on a kernel! keep it up!
jhonnyx said:
good to know you're working on a kernel! keep it up!
Click to expand...
Click to collapse
thanks man,means alot! really do appreciate the support!
Flashing it as I type
Will report soon, it's good to see new kernel from people in this gnex threads
Edit: got my first freeze, lol. Maybe the voltages are too low, I guess?
But I got a couple questions:
1. Did you intended to UV voltages, including IVA? I see it lower than DirtyV and Franco.
2. The frequency steps..... There's a lot of it, but is it correct? There are numerous voltages that are new to me lol like 460, 1480, 1560...
Maybe you could explain just a little bit lol
Edit2: pattyboi did you implemented early suspend on interactive? There's a slight lag when waking up the device
Btw there's pegasusq, too.
This is how it starts you are now entering the Linux twilight zone of the quest for the best kernel patches go get em @pattyboi:)
@aosp you're a veteran
Sent from my Galaxy Nexus using xda app-developers app
@pattyboi:)
Thanks, bro! It looks nice. Do you maybe know how to add to this kernel 85MB Ram (to make SuperRAM version)?
ahmadairfan said:
Flashing it as I type
Will report soon, it's good to see new kernel from people in this gnex threads
Edit: got my first freeze, lol. Maybe the voltages are too low, I guess?
But I got a couple questions:
1. Did you intended to UV voltages, including IVA? I see it lower than DirtyV and Franco.
2. The frequency steps..... There's a lot of it, but is it correct? There are numerous voltages that are new to me lol like 460, 1480, 1560...
Maybe you could explain just a little bit lol
Edit2: pattyboi did you implemented early suspend on interactive? There's a slight lag when waking up the device
Btw there's pegasusq, too.
Click to expand...
Click to collapse
sorry for the late reply bud,i fell asleep after getting that 2nd build up. the 460 is gonna be removed,as i said im still nooby and i didnt add it right :silly: the rest should be correct as i didnt touch any other one,the uv voltages were just burstlams slight uv on regulators,i havent touched anything with iva,mpu or anything else,ill probabaly bump them up a lil within the nest couple days still gotta wrap my head around how to properly do it lol. but thank you for testing man! & yeah the interactive early suspend i "think" is there,is 7 am so im not entirely sure,if its causing wake lag i might try and switch the interacitves or just remove early suspend,like i said its a big mess i gotta iron out
EDIT ,one more thing,did you disable eco mode? that might cause wake delay because it was for me
pianistaPL said:
@pattyboi:)
Thanks, bro! It looks nice. Do you maybe know how to add to this kernel 85MB Ram (to make SuperRAM version)?
Click to expand...
Click to collapse
i will work on that for the next couple days! im still a noob so dont get your hopes up,but ill try man
aosp said:
This is how it starts you are now entering the Linux twilight zone of the quest for the best kernel patches go get em @pattyboi:)
Click to expand...
Click to collapse
thanks for the support man , if you ever can work some of your magic with amazing pullin up amazing commits,ill be very very grateful
as if i didnt spam the thread enough lol,we got a update! remove 460mhz due to it being added incorrectly,add fifo and fixes for it from ak's kernel,itll be up in 3 minutes!
pattyboi:) said:
as if i didnt spam the thread enough lol,we got a update! remove 460mhz due to it being added incorrectly,add fifo and fixes for it from ak's kernel,itll be up in 3 minutes!
Click to expand...
Click to collapse
Alright buddy you did it. Now all you gotta do is sit back and watch the thanks meter get higher than the post meter. Then you will be a certified guru.
pattyboi:) said:
i will work on that for the next couple days! im still a noob so dont get your hopes up,but ill try man
Click to expand...
Click to collapse
Thanks! You can always ask for help our amazing developers
I'm charging my phone and will install your kernel
DR3W5K1 said:
Alright buddy you did it. Now all you gotta do is sit back and watch the thanks meter get higher than the post meter. Then you will be a certified guru.
Click to expand...
Click to collapse
thanks man,the support really does mean the world for me
pianistaPL said:
Thanks! You can always ask for help our amazing developers
I'm charging my phone and will install your kernel
Click to expand...
Click to collapse
thats true man,ill prob talk to some of them tonight & thank you for giving it a shot
if you guys want,theres a latest build without early suspend,testing to see if it has anything to do with screen wake delay,its up on dropbox as i type
pattyboi:) said:
sorry for the late reply bud,i fell asleep after getting that 2nd build up. the 460 is gonna be removed,as i said im still nooby and i didnt add it right :silly: the rest should be correct as i didnt touch any other one,the uv voltages were just burstlams slight uv on regulators,i havent touched anything with iva,mpu or anything else,ill probabaly bump them up a lil within the nest couple days still gotta wrap my head around how to properly do it lol. but thank you for testing man! & yeah the interactive early suspend i "think" is there,is 7 am so im not entirely sure,if its causing wake lag i might try and switch the interacitves or just remove early suspend,like i said its a big mess i gotta iron out
EDIT ,one more thing,did you disable eco mode? that might cause wake delay because it was for me
Click to expand...
Click to collapse
Take it easy bud, we're all here learning as well lol
Yeah I'm not using eco mode and intelli-plug, not liking the less-snappier feel lol.
You could take interactive from either bsmitty's or Franco's, I think they're making out the best interactive so far. :good:
Also, this kernel has GPU governor. Is it overclocked as default?
Btw, I'm suggesting to do some wrapping on your OP. Because your kernel has many features inside lol :laugh:
Thanks!
ahmadairfan said:
Take it easy bud, we're all here learning as well lol
Yeah I'm not using eco mode and intelli-plug, not liking the less-snappier feel lol.
You could take interactive from either bsmitty's or Franco's, I think they're making out the best interactive so far. :good:
Also, this kernel has GPU governor. Is it overclocked as default?
Btw, I'm suggesting to do some wrapping on your OP. Because your kernel has many features inside lol :laugh:
Thanks!
Click to expand...
Click to collapse
I'll switch em out soon GPU us at the actual original clock.(384 or around that) I'm gonna try and get the sysfs thing for the oc set up today,was being a pain the other day,I'm not good with op's but I'll try
pattyboi:) said:
I'll switch em out soon GPU us at the actual original clock.(384 or around that) I'm gonna try and get the sysfs thing for the oc set up today,was being a pain the other day,I'm not good with op's but I'll try
Click to expand...
Click to collapse
I can make good OP in few minutes Will back
---------- Post added at 03:37 PM ---------- Previous post was at 03:20 PM ----------
Test OP:
INTRODUCTION
This is my personal kernel based of ASKP Kernel. I cherry-picked a lot of custom commits. I'm new in development so every help from developers and users will be great.
FEATURES
ASKP Haste+ as base
graphite and lto optimizations
metalsprings custom toolchain - Linaro 4.7.4
dirtyv commits
rcu updates
intelliplug
pvr governor's
zRAM
high perfomance sound
slight regulator undervolt
oc up to 1.6 ghz
smart reflex class 3 only (the switches in trickster dont work because you cannot adjust sr class 3)
some schedulers i use
some govs i use/like
fastcharge
eco mode
screen specific controls of course
updated thermal drivers
ion updates
700mb ram for user
voltage controls
exfat suppourt
ALL DOWNLOADS
https://www.dropbox.com/sh/z43idai19erzu2n/1NZ69_Jeo3
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ALL credits go to:
bsmitty83
franciscofranco
amperific
grarak
Ezekeel
burstlam
faux123
ak
imoseyon
metalspring
morfic
boype
and many many more!
GITHUB: https://github.com/pattyboi/kernel_tuna
CHANGELOG: https://github.com/pattyboi/kernel_tuna/commits/milestone?page=1
pattyboi:) said:
thanks for the support man , if you ever can work some of your magic with amazing pullin up amazing commits,ill be very very grateful
Click to expand...
Click to collapse
Firsties kill the vmsplit stock is optimal even boype knows
defconfig: 3G/1G vmsplit (tuna default) · ecf4b67 · boype/kernel_tuna_kk44 · GitHub - http://goo.gl/PXCfEo