hey guys i am trying to flash my samsung epic 4g to cricket i am bouncing between prl 38515 and 42700 and i can get 3g to work for a lil bit till i reboot the phone than every setting under ##3282# reverts back to not set and i lose everything also when i try to make calls i get either the phone is not authorized to make calls or to make a collect call message i called tech support and they said my account is good and they refreshed it and my esn is set on the account fine that there was something wrong with the flashing
i am using gingerbread eg22 v 2.3.4 rooted with cwm 3.1 and su privileges and when i set the settings under ##3282# there is no done option to save the settings so do i just use the back button to save the settings? and im using qpst v2.7 build 355 to flash the phone im about to try cdma workshop and see if it makes a difference
any help is greatly appreciated
Try this thread.
http://forum.xda-developers.com/showthread.php?t=1495754
Sent from my Galaxy Nexus using Tapatalk 2
thread posted
ok i tried the cm7 mod and still with no avail i cant make calls out its saying something about making collect calls and i have no datat and i cant figure out how to get into the data settings to make sure my settings are correct
Then your settings on qpst are wrong...
Double check everything.. something is not right. Use the guide on CricketUsers.com
Sent from my Galaxy Nexus using Tapatalk 2
melo1819 said:
Then your settings on qpst are wrong...
Double check everything.. something is not right. Use the guide on CricketUsers.com
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
ok how do i set the phone to modem instead of usb since ##8778# does not work anymore?
cyanogen mod
veni85 said:
ok how do i set the phone to modem instead of usb since ##8778# does not work anymore?
Click to expand...
Click to collapse
im trying to find the list of commands for cyanogen mod that will let me switch the usb and uart from pda to modem and how to get into the username data window so i can adjust my settings but i am looking everywhere and cant find anything can anyone help?
veni85 said:
ok how do i set the phone to modem instead of usb since ##8778# does not work anymore?
Click to expand...
Click to collapse
You need to Odin back to stock, you can't use 8778 on none of the custom ROMs. So flash to stock, make sure you can call out and everything with cricket then flash the cm7 or cm9s cricket roms.
Sent from my Galaxy Nexus using Tapatalk 2
melo1819 said:
You need to Odin back to stock, you can't use 8778 on none of the custom ROMs. So flash to stock, make sure you can call out and everything with cricket then flash the cm7 or cm9s cricket roms.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
That's not true. You can flash most TW ROMs and have access to dialer codes.
Sent from my SPH-L710 using xda premium
They never worked for me.... Only ROM that let me use dialer codes on the epic 4g was the stock ROM... But whatever..
Sent from my Galaxy Nexus using Tapatalk 2
Works fine on TPR and Cut n paste. I thought they worked with temp kexec boot from sd card rom too. All depends on if the dev debloats too much.
Sent from my PantechP4100 using xda premium
kennyglass123 said:
Works fine on TPR and Cut n paste. I thought they worked with temp kexec boot from sd card rom too. All depends on if the dev debloats too much.
Sent from my PantechP4100 using xda premium
Click to expand...
Click to collapse
Yep definitely works just fine on the kexec stock rom also... pretty much any tw rom allows those codes...
Teach a person a day how to search!
Related
Hi, I just flashed cm10.1 and after booting it tried to activate but I got error 16, does anyone know how to fix this?
You have to call Sprint. It is a network flag that means the network thinks you have 2 phones using the same ESN in other words cloned. It could be a network tower echo.
Sent from my SPH-L710 using xda premium
I called and they were trying to have me check some menu by dialing ##54xxxxx# I don't really remember the code but it didn't do anything, then they wanted me to update the profile but that option isn't on the rom. Should I just tell them I have a custom rom?
You can't use dialer codes on a CM ROM. You have to be on stock or a TW ROM for them to work.
Sent from my SPH-D700 using Tapatalk 2
frostedunit said:
You can't use dialer codes on a CM ROM. You have to be on stock or a TW ROM for them to work.
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
This ^^^^^. If you tell them you have a custom ROM they will not help you. You will either need to find and set up the stock ROM flash from sd card or back up your ROM and flash an MTD TW ROM like the People's ROM.
XDA Moderator
So how do other people run the rom without running into this issue?
shadow1892 said:
So how do other people run the rom without running into this issue?
Click to expand...
Click to collapse
Tower echoes are rare and once you flash back to TW and get it fixed, you should be good to flash whatever you like.
Sent from my SPH-D700 using Tapatalk 2
Oh ok thanks!
I bet you just have to sync your profile again. Do what Kenny suggested and backup your CM rom, flash an MTD TW rom. Then you can run update PRL and Profile.
Hey I'm trying to sell my S3 and after a factory reset and wiping everything in TWRP my name, email address and phone number is still under About device/Status. How do you remove this info? I really don't feel comfortable selling it to a stranger with all that info remaining is there a better wiping method? I'm not finding this anywhere. Thanks in advance.
Sent from my SPH-L710 using xda premium
This gets set when you activate. You may be able to clear it with ##rtn# but you will need your msl.
Sent from my SPH-L710 using xda app-developers app
m20120 said:
This gets set when you activate. You may be able to clear it with ##rtn# but you will need your msl.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Is it a hassle to obtain your msl? When I had an HTC evo lte it was as simple as running an app with root permissions.
w
Edit : the only is on MB1 and per this thread http://forum.xda-developers.com/showthread.php?t= I need to downgrade and flash an LJ7 ROM which will let me get the code via terminal. So after I obtain my MSL I just go in the settings and delete my info right?
Sent from my SPH-L710 using xda premium
xbmoyx said:
Is it a hassle to obtain your msl? When I had an HTC evo lte it was as simple as running an app with root permissions.
w
Edit : the only is on MB1 and per this thread http://forum.xda-developers.com/showthread.php?t= I need to downgrade and flash an LJ7 ROM which will let me get the code via terminal. So after I obtain my MSL I just go in the settings and delete my info right?
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Search on general, there are several pretty easy methods to do it
xbmoyx said:
Is it a hassle to obtain your msl? When I had an HTC evo lte it was as simple as running an app with root permissions.
w
Edit : the only is on MB1 and per this thread http://forum.xda-developers.com/showthread.php?t= I need to downgrade and flash an LJ7 ROM which will let me get the code via terminal. So after I obtain my MSL I just go in the settings and delete my info right?
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
You are correct about the downgrade to get the MSL. There is a root app but it stopped working a while ago. I know that under the ##rtn# screen there is an option to Reset the activation data but I am not positive that will clear the phone number.
m20120 said:
You are correct about the downgrade to get the MSL. There is a root app but it stopped working a while ago. I know that under the ##rtn# screen there is an option to Reset the activation data but I am not positive that will clear the phone number.
Click to expand...
Click to collapse
Yeah I'm not certain either yet but under edit in ##DATA# or ##rtn# it seems like you able to maybe add all 0's (I hope) for my cell and make a fake email.
Sent from my SPH-L710 using xda premium
Ahh so simply flashing an LJ7 ROM while currently on MB1 doesn't downgrade? I've found this http://www.android.gs/downgrade-sprint-galaxy-s3-jelly-bean-stock-rom/ and it says to use ClockworkMOD recovery but im currently on TWRP. Will TWRP work or is there an easier way to execute this? I flashed an old The Peoples ROM but it still shows me being on MB1. Will flashing a firmware only zip fix this?
Sent from my SPH-L710 using xda premium
xbmoyx said:
Ahh so simply flashing an LJ7 ROM while currently on MB1 doesn't downgrade? I've found this http://www.android.gs/downgrade-sprint-galaxy-s3-jelly-bean-stock-rom/ and it says to use ClockworkMOD recovery but im currently on TWRP. Will TWRP work or is there an easier way to execute this? I flashed an old The Peoples ROM but it still shows me being on MB1. Will flashing a firmware only zip fix this?
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
I've done this before to sell my Sprint S3 and can confirm that the dialer method does not work when rooted. In oder to do what you're requesting you'll need to transfer your account to another device. After doing this, the best way to clear out your info on the S3 and sell it is to
1) download the app "Get My MSL". It will most likely give you an error when tapping the "Get My MSL" option in the app at first.
2) open dialer and enter ##DATA#
3) When prompted to enter MSL code just choose any single digit number and enter it 6 times
4) once the popup message appears go immediately back into the "Get My MSL" app and select the option again and it will give you your MSL code. Make sure to save the code somewhere safe.
5) Now that you have your code, ODIN your phone back to complete 100% stock with the LJ7 stock tar file.
6) Once done, skip through the setup wizard upon first boot up and go straight into your dialer and enter ##786#
7) select "Reset" then enter MSL and hit "OK" .
8) select "OK" again on the "Reset to manufacture defaught" popup. It will reboot your phone.
9) Let it do it's thing in stock recovery and once booted up cancel the hands free activation and everything should be cleared out in "About Phone" in settings.
Sent from my Nexus 4 using xda premium
LuigiBull23 said:
I've done this before to sell my Sprint S3 and can confirm that the dialer method does not work when rooted. In oder to do what you're requesting you'll need to transfer your account to another device. After doing this, the best way to clear out your info on the S3 and sell it is to
1) download the app "Get My MSL". It will most likely give you an error when tapping the "Get My MSL" option in the app at first.
2) open dialer and enter ##DATA#
3) When prompted to enter MSL code just choose any single digit number and enter it 6 times
4) once the popup message appears go immediately back into the "Get My MSL" app and select the option again and it will give you your MSL code. Make sure to save the code somewhere safe.
5) Now that you have your code, ODIN your phone back to complete 100% stock with the LJ7 stock tar file.
6) Once done, skip through the setup wizard upon first boot up and go straight into your dialer and enter ##786#
7) select "Reset" then enter MSL and hit "OK" .
8) select "OK" again on the "Reset to manufacture defaught" popup. It will reboot your phone.
9) Let it do it's thing in stock recovery and once booted up cancel the hands free activation and everything should be cleared out in "About Phone" in settings.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Awesome thanks! I'm selling my phone with it rooted though can I do this and wipe all information and just flash a stock ROM? Do I have to ODIN back to stock LJ7 to completely wipe my phone and email address or can this be done with MB1? I was on The Peoples ROM MB1 and flashed an old LJ7 ROM but it still says MB1 baseband in the settings, will this still work? I don't have WiFi access to check if this worked I will this afternoon. Thanks for your help!
Sent from my SPH-L710 using xda premium
xbmoyx said:
Awesome thanks! I'm selling my phone with it rooted though can I do this and wipe all information and just flash a stock ROM? Do I have to ODIN back to stock LJ7 to completely wipe my phone and email address or can this be done with MB1? I was on The Peoples ROM MB1 and flashed an old LJ7 ROM but it still says MB1 baseband in the settings, will this still work? I don't have WiFi access to check if this worked I will this afternoon. Thanks for your help!
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
The build number for the firmware (aka modem/radio) is separate from the build number of the rom itself. Go into the dev section and search for a the LJ7 modem and flash that
xbmoyx said:
Awesome thanks! I'm selling my phone with it rooted though can I do this and wipe all information and just flash a stock ROM? Do I have to ODIN back to stock LJ7 to completely wipe my phone and email address or can this be done with MB1? I was on The Peoples ROM MB1 and flashed an old LJ7 ROM but it still says MB1 baseband in the settings, will this still work? I don't have WiFi access to check if this worked I will this afternoon. Thanks for your help!
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Follow the procedure above actually to the dot. Why? because If you try doing this while being rooted I GAURANTEE you will have problems and will wind up coming back here asking for help again but this time with another issue. To save you the trouble I highly recommend following the steps above. ODIN back to complete 100% stock LJ7. I've heard of some people not having much success trying this on MB1 but I haven't tried it myself as I am no longer with Sprint but I still support the forums. The last I have tried it on was on LJ7 and I along with many others have had success on that build so LJ7 would be your best bet. Modem and build are separate but flashing a tar file through ODIN will update everything, including the modem back to LJ7. If you wanna sell the phone rooted on the latest firmware then again follow the steps and after you've gotten through the last step, make sure to be connected to wifi so you may receive the MB1 update and then FINALLY root it. It may sound like a lot to do but it's really not.. so long as you know exactly what you're doing. Following this procedure is not only your safest way in selling a phone but it's also the BEST way to fully clear your ESN! (even after deactivation) Like I said I did this and my buyer was 100% satisfied.
Good luck!
Sent from my Nexus 4 using xda premium
LuigiBull23 said:
Follow the procedure above actually to the dot. Why? because If you try doing this while being rooted I GAURANTEE you will have problems and will wind up coming back here asking for help again but this time with another issue. To save you the trouble I highly recommend following the steps above. ODIN back to complete 100% stock LJ7. I've heard of some people not having much success trying this on MB1 but I haven't tried it myself as I am no longer with Sprint but I still support the forums. The last I have tried it on was on LJ7 and I along with many others have had success on that build so LJ7 would be your best bet. Modem and build are separate but flashing a tar file through ODIN will update everything, including the modem back to LJ7. If you wanna sell the phone rooted on the latest firmware then again follow the steps and after you've gotten through the last step, make sure to be connected to wifi so you may receive the MB1 update and then FINALLY root it. It may sound like a lot to do but it's really not.. so long as you know exactly what you're doing. Following this procedure is not only your safest way in selling a phone but it's also the BEST way to fully clear your ESN! (even after deactivation) Like I said I did this and my buyer was 100% satisfied.
Good luck!
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Ok cool. I flashed the LJ7 modem as well as being on an LJ7 ROM. If I still can't receive my MSL and complete the wipe via ##data# or ##rtn# I will ODIN back to stock as you said. Thanks everyone for the help!
Sent from my SPH-L710 using xda premium
xbmoyx said:
Ok cool. I flashed the LJ7 modem as well as being on an LJ7 ROM. If I still can't receive my MSL and complete the wipe via ##data# or ##rtn# I will ODIN back to stock as you said. Thanks everyone for the help!
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
I had a BIG problem doing this while rooted so if you do this while already rooted I wish you the best of luck but just know that I am not responsible for anything that may happen to your device.
Sent from my Nexus 4 using xda premium
LuigiBull23 said:
I had a BIG problem doing this while rooted so if you do this while already rooted I wish you the best of luck but just know that I am not responsible for anything that may happen to your device.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
In that case haha I'm going to unroot and return to stock. Seems easy enough and thanks for the forewarning. I'm having problems finding a thread on here exactly showing how to restore back to stock LJ7. I don't want to seem incapable of finding it I'm just coming up dry do you have this thread saved to your favorites that you could share? I appreciate all the help!
EDIT: http://theunlockr.com/2012/07/28/how-to-unroot-sprint-samsung-galaxy-s3/ that guide seems like what I need.
Sent from my SPH-L710 using xda premium
xbmoyx said:
In that case haha I'm going to unroot and return to stock. Seems easy enough and thanks for the forewarning. I'm having problems finding a thread on here exactly showing how to restore back to stock LJ7. I don't want to seem incapable of finding it I'm just coming up dry do you have this thread saved to your favorites that you could share? I appreciate all the help!
EDIT: http://theunlockr.com/2012/07/28/how-to-unroot-sprint-samsung-galaxy-s3/ that guide seems like what I need.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
That link doesn't exactly provide the firmware you're looking to flash. I have the correct one for you on my pc. I can upload you a mirror if you'd like.
Sent from my Nexus 4 using xda premium
LuigiBull23 said:
That link doesn't exactly provide the firmware you're looking to flash. I have the correct one for you on my pc. I can upload you a mirror if you'd like.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
That would be nice of you man I appreciate it. Exactly which firmware do I need? I don't just need the original stock ROM to pull the .tar file? I had no problem rooting but unrooting sounds a little more difficult.
Sent from my SPH-L710 using xda premium
xbmoyx said:
That would be nice of you man I appreciate it. Exactly which firmware do I need? I don't just need the original stock ROM to pull the .tar file? I had no problem rooting but unrooting sounds a little more difficult.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
not difficult at all. You can unroot back to any of the stock firmwares that have been released on the Sprint S3. The problem is that many of the links here are broken and I'm trying to prevent you from unrooting all the way back to an ICS stock firmware requiring you to accept 1 too many OTAs. So Like I said I recommend LJ7 but I just realized I actually did wind up deleting the LJ7 file on my pc when I switched to T-Mobile. My apologies but I did manage to find one of my subscribed threads that will return you back to stock MB1 without a pc. They are flashable zips, just like flashing any ROM, and the op says the MB1 issues have been fixed. Again, I wasn't able to test this out but it's intended to do the same work as ODIN so it's worth a shot and a much easier approach. Report back with your results and good luck!
http://forum.xda-developers.com/showthread.php?t=1904099
Sent from my Nexus 4 using xda premium
---------- Post added at 12:27 PM ---------- Previous post was at 12:19 PM ----------
LuigiBull23 said:
not difficult at all. You can unroot back to any of the stock firmwares that have been released on the Sprint S3. The problem is that many of the links here are broken and I'm trying to prevent you from unrooting all the way back to an ICS stock firmware requiring you to accept 1 too many OTAs. So Like I said I recommend LJ7 but I just realized I actually did wind up deleting the LJ7 file on my pc when I switched to T-Mobile. My apologies but I did manage to find one of my subscribed threads that will return you back to stock MB1 without a pc. They are flashable zips, just like flashing any ROM, and the op says the MB1 issues have been fixed. Again, I wasn't able to test this out but it's intended to do the same work as ODIN so it's worth a shot and a much easier approach. Report back with your results and good luck!
http://forum.xda-developers.com/showthread.php?t=1904099
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Oh and as always do a nandroid backup
Sent from my Nexus 4 using xda premium
LuigiBull23 said:
not difficult at all. You can unroot back to any of the stock firmwares that have been released on the Sprint S3. The problem is that many of the links here are broken and I'm trying to prevent you from unrooting all the way back to an ICS stock firmware requiring you to accept 1 too many OTAs. So Like I said I recommend LJ7 but I just realized I actually did wind up deleting the LJ7 file on my pc when I switched to T-Mobile. My apologies but I did manage to find one of my subscribed threads that will return you back to stock MB1 without a pc. They are flashable zips, just like flashing any ROM, and the op says the MB1 issues have been fixed. Again, I wasn't able to test this out but it's intended to do the same work as ODIN so it's worth a shot and a much easier approach. Report back with your results and good luck!
http://forum.xda-developers.com/showthread.php?t=1904099
Sent from my Nexus 4 using xda premium
---------- Post added at 12:27 PM ---------- Previous post was at 12:19 PM ----------
Oh and as always do a nandroid backup
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Ok so with my current state I'm on a LJ7 ROM and flashed the LJ7 modem, after I get my MSL number I should flash the Stock MB1 ROM method you just posted then continue with resetting back to manufacture settings in ##DATA# and I should be gold correct? I thank you once again for your help!
Sent from my SPH-L710 using xda premium
xbmoyx said:
Ok so with my current state I'm on a LJ7 ROM and flashed the LJ7 modem, after I get my MSL number I should flash the Stock MB1 ROM method you just posted then continue with resetting back to manufacture settings in ##DATA# and I should be gold correct? I thank you once again for your help!
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
First of all, in this case don't worry about flashing any modems. Also, ##DATA# is what you'll need in the beginning to obtain your MSL. ##RTN# or ##786# is what you'll be entering at the end to return to manufacture default. To keep it simple for you, just follow the same step by step procedure I posted in the previous page BUT once you get to step 5, replace that with the MB1 post above and once done proceed to step 6 and so on. As long as you follow my instructions correctly you should have no issues.
Sent from my Nexus 4 using xda premium
LuigiBull23 said:
First of all, in this case don't worry about flashing any modems. Also, ##DATA# is what you'll need in the beginning to obtain your MSL. To keep it simple for you, just follow the same step by step procedure I posted in the previous page BUT once you get to step 5, replace that with the MB1 post above and once done proceed to step 6 and so on. As long as you follow my instructions correctly you should have no issues.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Sounds good! When I get home and have WiFi access I'll hook all this up and report back! Thanks a lot.
Sent from my SPH-L710 using xda premium
ive tried EVERYTHINGin qpst tht i was supposed to do to get data but i still yet dont have any data this phone is flashed to metropcs and i tried every single version of android and still no data can someone please help or inbox me with help?? maybe we can do this through team viewer i need major help please!
felix787 said:
ive tried EVERYTHINGin qpst tht i was supposed to do to get data but i still yet dont have any data this phone is flashed to metropcs and i tried every single version of android and still no data can someone please help or inbox me with help?? maybe we can do this through team viewer i need major help please!
Click to expand...
Click to collapse
Have you tried an updated modem?
Sent from my SPH-D710BST using xda premium
im on cm10.1 GB27 baseband
Anyone help please??!?
felix787 said:
im on cm10.1 GB27 baseband
Click to expand...
Click to collapse
There's your problem. Flash an ICS baseband.
Sent from my SPH-D710 using xda app-developers app
as a metter fact i just went to an ics rom and is ics baseband still no data =/
felix787 said:
as a metter fact i just went to an ics rom and is ics baseband still no data =/
Click to expand...
Click to collapse
What rom, what baseband?
Sent from my SPH-D710BST using xda premium
Phantom rom and ff18
felix787 said:
Phantom rom and ff18
Click to expand...
Click to collapse
Hmmm, have you tried going back to stock everything?
Sent from my SPH-D710BST using xda premium
Yes everything el29 and evrything :/
felix787 said:
Yes everything el29 and evrything :/
Click to expand...
Click to collapse
Not to insult your intelligence, just trying to help, but is your 3g/4g toggled to on in your settings and or pulldown? And try flashing stock jellybean Rom and modem and update your prl and profile(unless you've done that already)
Sent from my SPH-D710BST using xda app-developers app
Yeh i downloades stock jelly bean from samsung and nothing metropcs prl latest prl is 3033 and yes 3g is toggled :/
Probably need to check your QPST settings again bro, I'm on CM10.1 like you and my 3g works fine AFTER flashing alt-carrier data fix.
eliteone1 said:
Probably need to check your QPST settings again bro, I'm on CM10.1 like you and my 3g works fine AFTER flashing alt-carrier data fix.
Click to expand...
Click to collapse
I haven't messed with Metro since last year when I set up my wife with my a Sprint S2 on Caulkins ROM. I recall having to mess with setting manual APN settings to get data to work.
Is that still the case with these newer roms?
dkd711 said:
I haven't messed with Metro since last year when I set up my wife with my a Sprint S2 on Caulkins ROM. I recall having to mess with setting manual APN settings to get data to work.
Is that still the case with these newer roms?
Click to expand...
Click to collapse
Not really, APN settings these days are usually in regards to getting MMS to work. I do recall losing my Metro flash while flashing ROM's around on my Droid 2 back in the day. Not sure if there's any situation in which the Metro flash could possibly be wiped with the Epic 4g Touch but that might be a thought to keep in mind. Good luck!
I bought a note i317m off craiglist and he had flashed a verizon rom on a rogers (i think) canadian phone.
I went back to 4.1.1 and performed the free unlock. It read my sim fine, i made calls, connected to LTE, etc.
I flashed a 4.2.2 rom and now i cant get it to read any sim i put in to it (all the sims work and some were active)
imei under phone info matches the sticker
Can anyone recommend a way to completely restore this phone. Format the entire sd and start fresh?
Ok from that model# that shows sounds like someone or who ever you got it from, flashed a Verizon Rom on there?? Because that's there model#for there GN2.
Team win is the custom recovery, call TWRP!
Next you can just Odin back to stock and hopefully you'll b good to go.
But I think you should start here for your info!! A lot of your questions will b answered there... :thumbup:
http://forum.xda-developers.com/showthread.php?t=1987541
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
Bajanman said:
Ok from that model# that shows sounds like someone or who ever you got it from, flashed a Verizon Rom on there?? Because that's there model#for there GN2.
Team win is the custom recovery, call TWRP!
Next you can just Odin back to stock and hopefully you'll b good to go.
But I think you should start here for your info!! A lot of your questions will b answered there... :thumbup:
http://forum.xda-developers.com/showthread.php?t=1987541
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Ahahah yeah, i just figured out teamwin is twrp, I run cwm on my nexus.
Thanks for the help
freerider_4life said:
Ahahah yeah, i just figured out teamwin is twrp, I run cwm on my nexus.
Thanks for the help
Click to expand...
Click to collapse
No problem!!
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
Bajanman said:
No problem!!
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I can't really figure out how to completely go back to stock and start fresh.
If i flash a new rom i'll still have all the junk on my internal SD
freerider_4life said:
I can't really figure out how to completely go back to stock and start fresh.
If i flash a new rom i'll still have all the junk on my internal SD
Click to expand...
Click to collapse
You'll just have to wipe your internal STORAGE. But just back up anything that you'll like to keep. If you use Odin back to stock then, there will be nothing on your phone!! Afterwards
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
Bajanman said:
You'll just have to wipe your internal STORAGE. But just back up anything that you'll like to keep. If you use Odin back to stock then, there will be nothing on your phone!! Afterwards
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Do i do that through recovery? Do i have to reflash my rom or anything?
Yes you do it thru recovery! If that's the one that you want to use(Rom) then no need to re flash anything.. but you will have to set it back up again. But I do recommend TWRP it's a lil easier to use to me personally! But I'm say use what your use to using! Then there's no problems lol.
Don't forget to grab (back up)what you want off the phone b4 you do this wipe:what:. Because your going to lose everything. I've just done this recently, meaning cleaning out my phone completely!
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
Yiu might want to look at tge possibility that the guy bought an i317 box for his verzion note 2.
Sent from my SAMSUNG-SGH-I317 using xda premium
Bajanman said:
Yes you do it thru recovery! If that's the one that you want to use(Rom) then no need to re flash anything.. but you will have to set it back up again. But I do recommend TWRP it's a lil easier to use to me personally! But I'm say use what your use to using! Then there's no problems lol.
Don't forget to grab (back up)what you want off the phone b4 you do this wipe:what:. Because your going to lose everything. I've just done this recently, meaning cleaning out my phone completely!
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I probably sound like such a noob..
I did a backup before i flashed this rom and now i cant restore it, it says that there are no files..
ayo234 said:
Yiu might want to look at tge possibility that the guy bought an i317 box for his verzion note 2.
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
the imei behind the battery matches the box. I'm gonna say the guy flashed a verizon on this i317
Yes that's what I had said that he did from the first place. Because of the model#
Ok I'll send you a PM. So you don't clutter the thread's ok.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
BUMP
phone cant read sim, see first post for details
Hi, newbie here. I bought a brand new Samsung galaxy note 2 from sprint and I jail broke it using the ordin tool kit. Well, according to root checker it was successful. but here is where I am having problems. I flashed about 3 different ROMS to it but I cannot get any mobile network on phone.There is an X over the signal strength on phone screen. When you go to settings , then status it says:Network unknown, Mobile network type unknown, Service state out of service, My phone number unknown , Mobile network state disconnected, MIN unknown, PRL unknown, MEID unknown, IMEI unknown, ICCID unknown. The internet works only via wifi. I called sprint to verify that that my services are still current and i even got the MSL # from them. Any ideas on how to solve this problem is greatly appreciated.
Sprint Samsung Galaxy Note 2
Model# SPH-L900
Android Version 4.1.2
Base band version UNKNOWN
Kernel version 3.0.36Perseus-alpha
Build number Goodness Noteworthy v1.0.6
I had the same problem. It did it for me by updating/reflashing the latest modem
Sent from my SPH-L900 using Tapatalk
http://forum.xda-developers.com/showthread.php?t=2139889
You should find the latest modem versions here. Even if you had them, reinstall.
It should fix your issue
Sent from my SPH-L900 using Tapatalk
BBobby said:
http://forum.xda-developers.com/showthread.php?t=2139889
You should find the latest modem versions here. Even if you had them, reinstall.
It should fix your issue
Sent from my SPH-L900 using Tapatalk
Click to expand...
Click to collapse
I have the same issue and have tried using the latest modem but it still happens. I also have the same issue when restoring nands from cwm and twrp. Going to try a couple of the older modems and hopefully one of them will work.
What I did I installed the modem again and the kernel. I had started a thread in which I helped myself lol. But it's either the kernel or the modem. After that I never again had an issue.
The reason I eliminated the kernel is that pretty much every ROM has its own kernel.
But then again im no expert. Just a guy who got the same problem resolved in the same device
Sent from my SPH-L900 using Tapatalk
IronMyke said:
Hi, newbie here. I bought a brand new Samsung galaxy note 2 from sprint and I jail broke it using the ordin tool kit. Well, according to root checker it was successful. but here is where I am having problems. I flashed about 3 different ROMS to it but I cannot get any mobile network on phone.There is an X over the signal strength on phone screen. When you go to settings , then status it says:Network unknown, Mobile network type unknown, Service state out of service, My phone number unknown , Mobile network state disconnected, MIN unknown, PRL unknown, MEID unknown, IMEI unknown, ICCID unknown. The internet works only via wifi. I called sprint to verify that that my services are still current and i even got the MSL # from them. Any ideas on how to solve this problem is greatly appreciated.
Sprint Samsung Galaxy Note 2
Model# SPH-L900
Android Version 4.1.2
Base band version UNKNOWN
Kernel version 3.0.36Perseus-alpha
Build number Goodness Noteworthy v1.0.6
Click to expand...
Click to collapse
Try the Sprint activation command. ##SCRTN# it works for me.
Stepped down to ljc modem and now my flashed cricket settings stick. No matter how I flashed mc2 modem (recovery or Odin) nothing stayed after flashing, restoring, or factory reset. Also my signal was stronger with the older modem.
Sent from my SPH-L900 using xda app-developers app
datdirtyscrew said:
Try the Sprint activation command. ##SCRTN# it works for me.
Click to expand...
Click to collapse
I've been having an issue where I'm not receiving any phone calls, I tried this code and it didn't help. I've tried different types of codes and even called Sprint but nothing has changed. Still not receiving phone calls.
Anyone have any other dialer codes that I can try that may help? No problem sending or receiving texts, no issues making calls.
I've tried a few different roms, clean wipes, restores of nandroids, mc2 and ma7 modems. Right now, I'm on Synergy. Updated prl and profile as well.
Any thoughts would be much appreciated!
Sent from my SPH-L900 using Tapatalk
I have the sameee problem however NONE of the modems worked for me.. I tried all of them from the links.. is there any other way to get this fixed??
ganjamatik said:
I have the sameee problem however NONE of the modems worked for me.. I tried all of them from the links.. is there any other way to get this fixed??
Click to expand...
Click to collapse
What have you flashed recently to c a use the problem?
ganjamatik said:
I have the sameee problem however NONE of the modems worked for me.. I tried all of them from the links.. is there any other way to get this fixed??
Click to expand...
Click to collapse
Are you flashing 4.4 roms such as cm11 using twrp? If not what rom are you flashing?
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
Are you flashing 4.4 roms such as cm11 using twrp? If not what rom are you flashing?
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I got it today and it was a strock rom- all I have tried flashing was stock rom and that's only because it had the red x above the signal- I don't care what rom I need to use as long as I get the signal back but again im only messin with stock roms/modems to try and fix as of now
ganjamatik said:
I got it today and it was a strock rom- all I have tried flashing was stock rom and that's only because it had the red x above the signal- I don't care what rom I need to use as long as I get the signal back but again im only messin with stock roms/modems to try and fix as of now
Click to expand...
Click to collapse
Lets get some more info
1. You are using a sprint note 2?
2. Are you on sprint service or flashed to another?
3. What version were you on before the issue started and/or before you started flashing roms 4.1.1, 4.1.2, or 4.3?
4. Have you flashed any roms through odin?
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
Lets get some more info
1. You are using a sprint note 2?
2. Are you on sprint service or flashed to another?
3. What version were you on before the issue started and/or before you started flashing roms 4.1.1, 4.1.2, or 4.3?
4. Have you flashed any roms through odin?
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
the phone came to me already on 4.3 its a sprint note 2 and its not flashed to anything yet.
ganjamatik said:
the phone came to me already on 4.3 its a sprint note 2 and its not flashed to anything yet.
Click to expand...
Click to collapse
Well my first suggestion would be to flash a stock mk4 (4.3) rom via odin. I will edit this in a moment with a link.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Here you go
http://forum.xda-developers.com/showthread.php?t=2591898
Use odin and flash this. If you need help with that feel free to ask.
jlmancuso said:
Well my first suggestion would be to flash a stock mk4 (4.3) rom via odin. I will edit this in a moment with a link.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Here you go
http://forum.xda-developers.com/showthread.php?t=2591898
Use odin and flash this. If you need help with that feel free to ask.
Click to expand...
Click to collapse
I just tried that but still has the red x
Guys you have to do a manual provisioning of the phone. Since your phone has no valid entries you will not get a signal or be able to provision via data connection. I can't recall the hash code to get into manual provisioning but that's exactly what you have to do in this case. It's best just to call Sprint tech support and they can step you through it as well as give you the correct parameters, min, etc. Been there done that.
Handsfree sprint activation is ##72786#
Hoping this helps
Sent from my SPH-L900 using xda premium
I would have suggested Hands Free Activation but it won't work because the phone can't connect to service in its current state. Manual provisioning is the only way to get the phone back in service. Call Sprint tech support because they can give you the correct numbers and other entries that must be correct in order for the phone to connect to any service.
tx_dbs_tx said:
I would have suggested Hands Free Activation but it won't work because the phone can't connect to service in its current state. Manual provisioning is the only way to get the phone back in service. Call Sprint tech support because they can give you the correct numbers and other entries that must be correct in order for the phone to connect to any service.
Click to expand...
Click to collapse
Uhhh what if you're on a Sprint MNVO, like Ting?
Sent from my SPH-D710 using xda app-developers app