Hi, newbie here. I bought a brand new Samsung galaxy note 2 from sprint and I jail broke it using the ordin tool kit. Well, according to root checker it was successful. but here is where I am having problems. I flashed about 3 different ROMS to it but I cannot get any mobile network on phone.There is an X over the signal strength on phone screen. When you go to settings , then status it says:Network unknown, Mobile network type unknown, Service state out of service, My phone number unknown , Mobile network state disconnected, MIN unknown, PRL unknown, MEID unknown, IMEI unknown, ICCID unknown. The internet works only via wifi. I called sprint to verify that that my services are still current and i even got the MSL # from them. Any ideas on how to solve this problem is greatly appreciated.
Sprint Samsung Galaxy Note 2
Model# SPH-L900
Android Version 4.1.2
Base band version UNKNOWN
Kernel version 3.0.36Perseus-alpha
Build number Goodness Noteworthy v1.0.6
I had the same problem. It did it for me by updating/reflashing the latest modem
Sent from my SPH-L900 using Tapatalk
http://forum.xda-developers.com/showthread.php?t=2139889
You should find the latest modem versions here. Even if you had them, reinstall.
It should fix your issue
Sent from my SPH-L900 using Tapatalk
BBobby said:
http://forum.xda-developers.com/showthread.php?t=2139889
You should find the latest modem versions here. Even if you had them, reinstall.
It should fix your issue
Sent from my SPH-L900 using Tapatalk
Click to expand...
Click to collapse
I have the same issue and have tried using the latest modem but it still happens. I also have the same issue when restoring nands from cwm and twrp. Going to try a couple of the older modems and hopefully one of them will work.
What I did I installed the modem again and the kernel. I had started a thread in which I helped myself lol. But it's either the kernel or the modem. After that I never again had an issue.
The reason I eliminated the kernel is that pretty much every ROM has its own kernel.
But then again im no expert. Just a guy who got the same problem resolved in the same device
Sent from my SPH-L900 using Tapatalk
IronMyke said:
Hi, newbie here. I bought a brand new Samsung galaxy note 2 from sprint and I jail broke it using the ordin tool kit. Well, according to root checker it was successful. but here is where I am having problems. I flashed about 3 different ROMS to it but I cannot get any mobile network on phone.There is an X over the signal strength on phone screen. When you go to settings , then status it says:Network unknown, Mobile network type unknown, Service state out of service, My phone number unknown , Mobile network state disconnected, MIN unknown, PRL unknown, MEID unknown, IMEI unknown, ICCID unknown. The internet works only via wifi. I called sprint to verify that that my services are still current and i even got the MSL # from them. Any ideas on how to solve this problem is greatly appreciated.
Sprint Samsung Galaxy Note 2
Model# SPH-L900
Android Version 4.1.2
Base band version UNKNOWN
Kernel version 3.0.36Perseus-alpha
Build number Goodness Noteworthy v1.0.6
Click to expand...
Click to collapse
Try the Sprint activation command. ##SCRTN# it works for me.
Stepped down to ljc modem and now my flashed cricket settings stick. No matter how I flashed mc2 modem (recovery or Odin) nothing stayed after flashing, restoring, or factory reset. Also my signal was stronger with the older modem.
Sent from my SPH-L900 using xda app-developers app
datdirtyscrew said:
Try the Sprint activation command. ##SCRTN# it works for me.
Click to expand...
Click to collapse
I've been having an issue where I'm not receiving any phone calls, I tried this code and it didn't help. I've tried different types of codes and even called Sprint but nothing has changed. Still not receiving phone calls.
Anyone have any other dialer codes that I can try that may help? No problem sending or receiving texts, no issues making calls.
I've tried a few different roms, clean wipes, restores of nandroids, mc2 and ma7 modems. Right now, I'm on Synergy. Updated prl and profile as well.
Any thoughts would be much appreciated!
Sent from my SPH-L900 using Tapatalk
I have the sameee problem however NONE of the modems worked for me.. I tried all of them from the links.. is there any other way to get this fixed??
ganjamatik said:
I have the sameee problem however NONE of the modems worked for me.. I tried all of them from the links.. is there any other way to get this fixed??
Click to expand...
Click to collapse
What have you flashed recently to c a use the problem?
ganjamatik said:
I have the sameee problem however NONE of the modems worked for me.. I tried all of them from the links.. is there any other way to get this fixed??
Click to expand...
Click to collapse
Are you flashing 4.4 roms such as cm11 using twrp? If not what rom are you flashing?
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
Are you flashing 4.4 roms such as cm11 using twrp? If not what rom are you flashing?
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I got it today and it was a strock rom- all I have tried flashing was stock rom and that's only because it had the red x above the signal- I don't care what rom I need to use as long as I get the signal back but again im only messin with stock roms/modems to try and fix as of now
ganjamatik said:
I got it today and it was a strock rom- all I have tried flashing was stock rom and that's only because it had the red x above the signal- I don't care what rom I need to use as long as I get the signal back but again im only messin with stock roms/modems to try and fix as of now
Click to expand...
Click to collapse
Lets get some more info
1. You are using a sprint note 2?
2. Are you on sprint service or flashed to another?
3. What version were you on before the issue started and/or before you started flashing roms 4.1.1, 4.1.2, or 4.3?
4. Have you flashed any roms through odin?
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
Lets get some more info
1. You are using a sprint note 2?
2. Are you on sprint service or flashed to another?
3. What version were you on before the issue started and/or before you started flashing roms 4.1.1, 4.1.2, or 4.3?
4. Have you flashed any roms through odin?
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
the phone came to me already on 4.3 its a sprint note 2 and its not flashed to anything yet.
ganjamatik said:
the phone came to me already on 4.3 its a sprint note 2 and its not flashed to anything yet.
Click to expand...
Click to collapse
Well my first suggestion would be to flash a stock mk4 (4.3) rom via odin. I will edit this in a moment with a link.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Here you go
http://forum.xda-developers.com/showthread.php?t=2591898
Use odin and flash this. If you need help with that feel free to ask.
jlmancuso said:
Well my first suggestion would be to flash a stock mk4 (4.3) rom via odin. I will edit this in a moment with a link.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Here you go
http://forum.xda-developers.com/showthread.php?t=2591898
Use odin and flash this. If you need help with that feel free to ask.
Click to expand...
Click to collapse
I just tried that but still has the red x
Guys you have to do a manual provisioning of the phone. Since your phone has no valid entries you will not get a signal or be able to provision via data connection. I can't recall the hash code to get into manual provisioning but that's exactly what you have to do in this case. It's best just to call Sprint tech support and they can step you through it as well as give you the correct parameters, min, etc. Been there done that.
Handsfree sprint activation is ##72786#
Hoping this helps
Sent from my SPH-L900 using xda premium
I would have suggested Hands Free Activation but it won't work because the phone can't connect to service in its current state. Manual provisioning is the only way to get the phone back in service. Call Sprint tech support because they can give you the correct numbers and other entries that must be correct in order for the phone to connect to any service.
tx_dbs_tx said:
I would have suggested Hands Free Activation but it won't work because the phone can't connect to service in its current state. Manual provisioning is the only way to get the phone back in service. Call Sprint tech support because they can give you the correct numbers and other entries that must be correct in order for the phone to connect to any service.
Click to expand...
Click to collapse
Uhhh what if you're on a Sprint MNVO, like Ting?
Sent from my SPH-D710 using xda app-developers app
Related
Here is what I did:
1. flashed CWM
2. backed up the factory stock ROM
3. Flashed Phantom's ROM
4. Booted back to CWM and restored stock ROM
No signa/data now. It's like I have no radio.
flashed the LG2 modem and still no signal/radio
Back to CMW. Flashed a stock/deodexed/rooted ROM = no signal/data
What could be the problem? Help!
Did you happen to lose your IMEI?
Sent from my SAMSUNG-SGH-I747 using xda premium
Ahve you look at setting and try to update prl and profile, also check in settings, about device and status to check for IMEI
Sent from my SGH-T999 using Tapatalk 2
I do have the IMEI. It's a 15 digit number.
I just flashed the factory restore ROM with ODIN and still no data/signal
WTFFFFF is going on?????
jgalan14 said:
Ahve you look at setting and try to update prl and profile, also check in settings, about device and status to check for IMEI
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
can't update prl and profile because i have no data
AvatarOfFrost said:
can't update prl and profile because i have no data
Click to expand...
Click to collapse
S*** call sprint right now that you back in stock, they will re provision your device with some codes have a paper ready they will give you lsm number might come in handy in the future
Sent from my SGH-T999 using Tapatalk 2
jgalan14 said:
S*** call sprint right now that you back in stock, they will re provision your device with some codes have a paper ready they will give you lsm number might come in handy in the future
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
can't call because this is my only phone.
i chatted with an agent online and they refreshed the device and services and still no dice.
i guess i'm going to a sprint store and see what they say
Conclusion?
AvatarOfFrost said:
can't call because this is my only phone.
i chatted with an agent online and they refreshed the device and services and still no dice.
i guess i'm going to a sprint store and see what they say
Click to expand...
Click to collapse
Were you able to fix it?
Hi, I have gotten myself into a sticky situation and I could use a little advice. I rooted my SGH-I317 Note 2 (AT&T) and installed a custom ROM. After installation, I noticed that my network connection was unavailable and I could not make/receive calls etc. My sys restore fails with the MD5 error, so I was looking for a solution to make the fix happen. I tried installing a stock ROM but I'm still showing "unknown" baseband version so I'm assuming I need a ROM with my correct firmware? Any help is appreciated.. 7:30am here and been working on this all night. I need my phone! : )
juhs said:
Hi, I have gotten myself into a sticky situation and I could use a little advice. I rooted my SGH-I317 Note 2 (AT&T) and installed a custom ROM. After installation, I noticed that my network connection was unavailable and I could not make/receive calls etc. My sys restore fails with the MD5 error, so I was looking for a solution to make the fix happen. I tried installing a stock ROM but I'm still showing "unknown" baseband version so I'm assuming I need a ROM with my correct firmware? Any help is appreciated.. 7:30am here and been working on this all night. I need my phone! : )
Click to expand...
Click to collapse
Im pretty sure if you find the correct modem for your note (at&t) and flash that in recovery it should get your phone calls working again.
Sent from my SPH-L900 using Tapatalk 2
Sounds like ypu flashed a sprint rom flash a at&t one and ypull be good
Sent from my SPH-L900 using xda app-developers app
budde2 said:
Sounds like ypu flashed a sprint rom flash a at&t one and ypull be good
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Thanks, I'm looking for a good one.. My data connection is working, but it goes in and out. System performance can be a little choppy also. Truly appreciate the comments and suggestions.
This is my first post. Whenever i try to flash a sprint version of any rom on my gs3 from boost my LTE doesn't work. The only way my data will work is if i switch it to CDMA which means no 4g. I even tried dialing ##72786# to reset my data connection but that didn't work either. Does anyone know of a solution to this?
http://androidforums.com/boost-mobi...s-root/772094-working-roms-mods-boost-s3.html
this link will have a lot of answers for you. always update your profile/prl after a flash. im on boost and running the sprint moar rom. everything works for me
Thank you. Ill give it a try later on.
Sent from my SPH-L710 using xda app-developers app
I tried the link you gave me. It had a zip file called piggyback.zip. I tried that but stil no results. I also cant update the prl or profile because it says connection error code 6. Im not even getting 3g. I tried MOAR and the peoples rom
Sent from my GT-N5110 using xda app-developers app
kp20kp said:
I tried the link you gave me. It had a zip file called piggyback.zip. I tried that but stil no results. I also cant update the prl or profile because it says connection error code 6. Im not even getting 3g. I tried MOAR and the peoples rom
Sent from my GT-N5110 using xda app-developers app
Click to expand...
Click to collapse
Did you try using Odin to go stock?
Sent from my SPH-L710 using xda app-developers app
I finally tried something that I never did before. Before flashing the rom I wiped my dalvik and cache partition. When I did that everything worked fine. 3g and 4g is working. I'm currently on the peoples rom Thanks for the help.
Sent from my SPH-L710 using xda app-developers app
bricker1 said:
http://androidforums.com/boost-mobi...s-root/772094-working-roms-mods-boost-s3.html
this link will have a lot of answers for you. always update your profile/prl after a flash. im on boost and running the sprint moar rom. everything works for me
Click to expand...
Click to collapse
I was wondering did you flash stock Sprint rom first? Also did you have to do the MMS fix? I am trying to flash a custom rom for my mothers new S3 but I am not really too sure about it since it is on Boost. If I wanted to flash back to stock, would I just use the stock Sprint firmware again? Did you flash 4.3 or an earlier version? I heard that the new 4.3 update has the Knox built in like the newer devices but not too sure if what I read was correct
girron said:
I was wondering did you flash stock Sprint rom first? Also did you have to do the MMS fix? I am trying to flash a custom rom for my mothers new S3 but I am not really too sure about it since it is on Boost. If I wanted to flash back to stock, would I just use the stock Sprint firmware again? Did you flash 4.3 or an earlier version? I heard that the new 4.3 update has the Knox built in like the newer devices but not too sure if what I read was correct
Click to expand...
Click to collapse
yes im on the 4.3 moar rom. since its a boost phone there are boost/vm software on android forums stickies. no im knox free
http://androidforums.com/boost-mobi...exed-deodexed-virgin-mobile-boost-mobile.html
there is your return. yes you will need to fix mms. moar is knox free
---------- Post added at 06:41 AM ---------- Previous post was at 06:34 AM ----------
girron said:
I was wondering did you flash stock Sprint rom first? Also did you have to do the MMS fix? I am trying to flash a custom rom for my mothers new S3 but I am not really too sure about it since it is on Boost. If I wanted to flash back to stock, would I just use the stock Sprint firmware again? Did you flash 4.3 or an earlier version? I heard that the new 4.3 update has the Knox built in like the newer devices but not too sure if what I read was correct
Click to expand...
Click to collapse
i flashed moar right from the boost rom. yes youll fix mms yes moar 710 is 4.3 and knox free
http://androidforums.com/boost-mobi...exed-deodexed-virgin-mobile-boost-mobile.html
this is return to stock
flashing boost mobile with sprint stock rom
kp20kp said:
This is my first post. Whenever i try to flash a sprint version of any rom on my gs3 from boost my LTE doesn't work. The only way my data will work is if i switch it to CDMA which means no 4g. I even tried dialing ##72786# to reset my data connection but that didn't work either. Does anyone know of a solution to this?
Click to expand...
Click to collapse
Please just confirm in clear terms for me, you flashed a boost mobile with official sprint stock rom??? i really need this information. please
alemosman said:
Please just confirm in clear terms for me, you flashed a boost mobile with official sprint stock rom??? i really need this information. please
Click to expand...
Click to collapse
That's correct. If your data doesn't work you'll have to change your APN settings since most of these ROMs are for the sprint s3 and not the boost mobile. I flash ROMs a lot and sometimes the data work so I won't have to change my APN. If you need help with that I can help
kp20kp said:
That's correct. If your data doesn't work you'll have to change your APN settings since most of these ROMs are for the sprint s3 and not the boost mobile. I flash ROMs a lot and sometimes the data work so I won't have to change my APN. If you need help with that I can help
Click to expand...
Click to collapse
thanks very much for your reply, you are the right person ive been looking for about a month now. i have downloaded a sprint stock rom JB 4.3 from sammobile for which id be flashing to my new boost mobile s3.
the essence here is am in Ghana with this device and obviously i have to change carrier because i cant have boost service here. My phone is still fresh in box and locked for that matter (only upgraded to JB 4.3 OTA). I would just like to unlock it for NAM configuration any help? Do i realy need to flash a sprint rom first?
version (*#1234#)
AP: L710VPUBMK5
CP: L710VPUBMK5
CSC: L710SPTBMK5
PLS HELP ME UNLOCK THIS DEVICE
I really don't know how to unlock a phone but I wouldn't mess with your phone since you did the OTA update to get 4.3. You have Knox now and that's bad to have. You can mess your phone up and void your warranty if you do anything with that knox
Sent from my SPH-L710 using xda app-developers app
I was wondering if anyone had any current Modem Drivers for 4.4 ? Every single 4.4 ROM I flash I get no service, no network connectivity I tried the latest modem drivers from here
http://www.rwilco12.com/downloads.php?dir=Files/Devices/Samsung Galaxy Note II (SPH-L900)/
Nothing seems to work. Any ideas ?
If you flashed the modem and still have no data service you need to re provision your phone. Try dialing ##72786# and see if that will do it. Afterwards go into settings and select the activate phone option down at the bottom. If non of that works you'll have to Odin a stock room and start over. That will definitely get you working again.
None of that works...I don't even get a signal for voice service...the phone has no connectivity whatsoever.
This all started after flashing to stock and starting over, I was having issues with 4g but now nothing...I managed to get a 4.2.2 carbon ROM working but that's it. No 4.4 ROM shows any signal at all.. Before flashing to stock I at least got 3g
Sent from my SPH-L900 using XDA Premium 4 mobile app
scorpnet said:
None of that works...I don't even get a signal for voice service...the phone has no connectivity whatsoever.
This all started after flashing to stock and starting over, I was having issues with 4g but now nothing...I managed to get a 4.2.2 carbon ROM working but that's it. No 4.4 ROM shows any signal at all.. Before flashing to stock I at least got 3g
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You're using the recovery that every single 4.4 ROM tells you NOT to use in the OP. Use CWM or PhilZ and you shall be happy. TWRP has yielded broken radios in flashing 4.4 builds for 3 months now. Very well known issue.
Ohh damn I love twrp... OK I will certinally GI e that a shot.. Thanks
Sent from my SPH-L900 using XDA Premium 4 mobile app
Hey guys. I just got an AT&T SGH-i747 from a friend. I'm on T-mobile. Can someone point me to the proper threads to get this working with a T-Mobile sim card, rooted & custom recovery flashed? Thanks!
You just need to SIM unlock it to get it working on T-Mobile. If its on 4.3 firmware you'll need to buy a code online.
Root using Towelroot.
Never flash anything but a simple ROM from our forum. For anything else such as firmware you have to use at forums.
Sent from my SAMSUNG-SGH-T999 using Tapatalk
DocHoliday77 said:
You just need to SIM unlock it to get it working on T-Mobile. If its on 4.3 firmware you'll need to buy a code online.
Root using Towelroot.
Never flash anything but a simple ROM from our forum. For anything else such as firmware you have to use at forums.
Sent from my SAMSUNG-SGH-T999 using Tapatalk
Click to expand...
Click to collapse
I747UCDMG2...which one is that? & can I get an unlock code from at&t without buying it?
BTW, I read the unlock thread after starting this one so at least I was able to get that far...lol
Edit: also, isn't there a way to check the binary code within a file & get the unlock code from there? I remember doing that with a friend's samsung infuse.
EDIT #2: Nevermind, I found the unlock method.
bigz1981 said:
I747UCDMG2...which one is that? & can I get an unlock code from at&t without buying it?
BTW, I read the unlock thread after starting this one so at least I was able to get that far...lol
Edit: also, isn't there a way to check the binary code within a file & get the unlock code from there? I remember doing that with a friend's samsung infuse.
EDIT #2: Nevermind, I found the unlock method.
Click to expand...
Click to collapse
I think that's 4.1.2 so the unlock method should work.. For flashing custom recovery check the at&t threads, it may be different for that device than ours, and you should be fine flashing any of the T-Mobile ROMs here. Flashing a T-Mobile touchwiz ROM will even give you Wi-Fi calling as well if that's of interest to you
serio22 said:
I think that's 4.1.2 so the unlock method should work.. For flashing custom recovery check the at&t threads, it may be different for that device than ours, and you should be fine flashing any of the T-Mobile ROMs here. Flashing a T-Mobile touchwiz ROM will even give you Wi-Fi calling as well if that's of interest to you
Click to expand...
Click to collapse
Thanks for the info. However, I don't think I have the 4.1.2 firmware. I don't have the "nw lock nv data initialliz" option
I have 4.1.2, but I need to roll back to 4.1.1 for the unlock method to work. I'm downloading odin, updated drivers, & 4.1.1 software now.
Soooo...I downgraded & unlocked successfully. However, I can't find towelroot. =\ I know my rooting options are limited, but can I use the odin method to root if I can't find towelroot? Also, I can't seem to use the mobile network for internet. Is this a known issue & is there a fix?
Towelroot is on page 1 in General.
Font know about network problem. Need detailed info about what is running on your device.
Sent from my SAMSUNG-SGH-T999 using Tapatalk
---------- Post added at 02:21 AM ---------- Previous post was at 02:18 AM ----------
You should read this thread BTW.
http://forum.xda-developers.com/showthread.php?t=2344627
Sent from my SAMSUNG-SGH-T999 using Tapatalk
DocHoliday77 said:
Towelroot is on page 1 in General.
Font know about network problem. Need detailed info about what is running on your device.
Sent from my SAMSUNG-SGH-T999 using Tapatalk
---------- Post added at 02:21 AM ---------- Previous post was at 02:18 AM ----------
You should read this thread BTW.
http://forum.xda-developers.com/showthread.php?t=2344627
Sent from my SAMSUNG-SGH-T999 using Tapatalk
Click to expand...
Click to collapse
I'm still running stock, but when I try to open the internet without a wifi connection, it says no mobile network.
I do have another question, though. I can't seem to get from the MJB to the NE4 firmware. when I try to install it, it says:
Code:
assert failed: getprop("ro.bootloader") == "I727UCUEMJB"
Checking firmware version in phone info, it shows I727UCUEMJB. I have superuser flashed. I'm at a loss unless it's a bad file & I need to find another.
EDIT:
I found another file...yours, actually...and it gives me "FILE CORRUPTION DETECTED!!!"
Install and open terminal emulator. Enter this..
getprop ro.bootloader
Let us know what it returns.
Sent from my SAMSUNG-SGH-T999 using Tapatalk
It's still showing DLK3.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Edit:
And I still have issues getting on the internet, no mobile network. I have S3Rx for the MJB firmware, along with ktoonsz kernel. does it possibly have to do with me browsing through the phone settings before I downgraded? I was exploring the different menus and could have possibly done something to disable my nework. any thoughts or ideas on that?
Actually, you are not on MJB firmware. You are on LK3 according to that command I gave you. So I'm guessing your baseband is MJB. This may be why it's not working. Flash the LK3 modem and see if that helps.
Sent from my SAMSUNG-SGH-T999 using Tapatalk
Ok. So I should go back to 4.1.1 using Odin, then flash up by steps? I tried the link with the update files, but they didn't work. The upgrade I did was supposed to be a modem flash from recovery. I got all my files from the sticky round up in the at&t section. What about the deal with my mobile network. That started way before all this, then I was on stock 4.1.1.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Oh, I thought it started after you had flashed something. In that case, I'd say the best option is to flash stock firmware via Odin and factory reset. If you are full stock and clean, and still have problems, we will at least know its not soft/firmware related.
Sent from my SAMSUNG-SGH-T999 using Tapatalk
No. It has been that way. Afaik, it has been since I had this phone. Had no service until I downgraded to do the unlock. I was going through that diagnostics menu looking through it before I realized I had to downgrade to get the option I needed to unlock the phone. Maybe I did something while I was going through the different options in that menu.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
bigz1981 said:
No. It has been that way. Afaik, it has been since I had this phone. Had no service until I downgraded to do the unlock. I was going through that diagnostics menu looking through it before I realized I had to downgrade to get the option I needed to unlock the phone. Maybe I did something while I was going through the different options in that menu.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
So I decided to check a few things in that menu & got my internet working. Problem is I can't get it to get past edge. =\
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
bigz1981 said:
So I decided to check a few things in that menu & got my internet working. Problem is I can't get it to get past edge. =\
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
If you are not in a refarmed area you'll have to do the AWS mod. Can you get LTE?
Hmmm. I know I'm in a city that can do lte: san antonio. I had to set the network control to gsm. However I chose all bands for gsm & all freq for lte.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
bigz1981 said:
Hmmm. I know I'm in a city that can do lte: san antonio. I had to set the network control to gsm. However I chose all bands for gsm & all freq for lte.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
That should be a refarmed area.. Choose automatic instead of GSm, that's why it will only connect to edge, and make sure you have the fast.t-mobile.com APN
Done. And it worked. Thanks!
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app