Hi, I just flashed cm10.1 and after booting it tried to activate but I got error 16, does anyone know how to fix this?
You have to call Sprint. It is a network flag that means the network thinks you have 2 phones using the same ESN in other words cloned. It could be a network tower echo.
Sent from my SPH-L710 using xda premium
I called and they were trying to have me check some menu by dialing ##54xxxxx# I don't really remember the code but it didn't do anything, then they wanted me to update the profile but that option isn't on the rom. Should I just tell them I have a custom rom?
You can't use dialer codes on a CM ROM. You have to be on stock or a TW ROM for them to work.
Sent from my SPH-D700 using Tapatalk 2
frostedunit said:
You can't use dialer codes on a CM ROM. You have to be on stock or a TW ROM for them to work.
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
This ^^^^^. If you tell them you have a custom ROM they will not help you. You will either need to find and set up the stock ROM flash from sd card or back up your ROM and flash an MTD TW ROM like the People's ROM.
XDA Moderator
So how do other people run the rom without running into this issue?
shadow1892 said:
So how do other people run the rom without running into this issue?
Click to expand...
Click to collapse
Tower echoes are rare and once you flash back to TW and get it fixed, you should be good to flash whatever you like.
Sent from my SPH-D700 using Tapatalk 2
Oh ok thanks!
I bet you just have to sync your profile again. Do what Kenny suggested and backup your CM rom, flash an MTD TW rom. Then you can run update PRL and Profile.
Related
hey guys i am trying to flash my samsung epic 4g to cricket i am bouncing between prl 38515 and 42700 and i can get 3g to work for a lil bit till i reboot the phone than every setting under ##3282# reverts back to not set and i lose everything also when i try to make calls i get either the phone is not authorized to make calls or to make a collect call message i called tech support and they said my account is good and they refreshed it and my esn is set on the account fine that there was something wrong with the flashing
i am using gingerbread eg22 v 2.3.4 rooted with cwm 3.1 and su privileges and when i set the settings under ##3282# there is no done option to save the settings so do i just use the back button to save the settings? and im using qpst v2.7 build 355 to flash the phone im about to try cdma workshop and see if it makes a difference
any help is greatly appreciated
Try this thread.
http://forum.xda-developers.com/showthread.php?t=1495754
Sent from my Galaxy Nexus using Tapatalk 2
thread posted
ok i tried the cm7 mod and still with no avail i cant make calls out its saying something about making collect calls and i have no datat and i cant figure out how to get into the data settings to make sure my settings are correct
Then your settings on qpst are wrong...
Double check everything.. something is not right. Use the guide on CricketUsers.com
Sent from my Galaxy Nexus using Tapatalk 2
melo1819 said:
Then your settings on qpst are wrong...
Double check everything.. something is not right. Use the guide on CricketUsers.com
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
ok how do i set the phone to modem instead of usb since ##8778# does not work anymore?
cyanogen mod
veni85 said:
ok how do i set the phone to modem instead of usb since ##8778# does not work anymore?
Click to expand...
Click to collapse
im trying to find the list of commands for cyanogen mod that will let me switch the usb and uart from pda to modem and how to get into the username data window so i can adjust my settings but i am looking everywhere and cant find anything can anyone help?
veni85 said:
ok how do i set the phone to modem instead of usb since ##8778# does not work anymore?
Click to expand...
Click to collapse
You need to Odin back to stock, you can't use 8778 on none of the custom ROMs. So flash to stock, make sure you can call out and everything with cricket then flash the cm7 or cm9s cricket roms.
Sent from my Galaxy Nexus using Tapatalk 2
melo1819 said:
You need to Odin back to stock, you can't use 8778 on none of the custom ROMs. So flash to stock, make sure you can call out and everything with cricket then flash the cm7 or cm9s cricket roms.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
That's not true. You can flash most TW ROMs and have access to dialer codes.
Sent from my SPH-L710 using xda premium
They never worked for me.... Only ROM that let me use dialer codes on the epic 4g was the stock ROM... But whatever..
Sent from my Galaxy Nexus using Tapatalk 2
Works fine on TPR and Cut n paste. I thought they worked with temp kexec boot from sd card rom too. All depends on if the dev debloats too much.
Sent from my PantechP4100 using xda premium
kennyglass123 said:
Works fine on TPR and Cut n paste. I thought they worked with temp kexec boot from sd card rom too. All depends on if the dev debloats too much.
Sent from my PantechP4100 using xda premium
Click to expand...
Click to collapse
Yep definitely works just fine on the kexec stock rom also... pretty much any tw rom allows those codes...
Teach a person a day how to search!
Sorry for the ignorant question...but how do i go about flashing an ns4g modem? is it true that to most experiences the signal is better? i have clean gb and fc09 modem and am gonna jump to cm10 nightly 10/01...how to i flash the modem? i want to try the nitest kernel along with cm10? should i just flash it? and if i ever want to go back to clean gb from a nan backup can i just restore and will the modem have any issues or how would i go back to fc09? sorry for all the questions tried reading through all the threads but got confused and dont want to risk breaking the phone...so can someone please help this bafoon? thank you all for your time and help....
mcluvin1065 said:
Sorry for the ignorant question...but how do i go about flashing an ns4g modem? is it true that to most experiences the signal is better? i have clean gb and fc09 modem and am gonna jump to cm10 nightly 10/01...how to i flash the modem? i want to try the nitest kernel along with cm10? should i just flash it? and if i ever want to go back to clean gb from a nan backup can i just restore and will the modem have any issues or how would i go back to fc09? sorry for all the questions tried reading through all the threads but got confused and dont want to risk breaking the phone...so can someone please help this bafoon? thank you all for your time and help....
Click to expand...
Click to collapse
You should start at the ns4g modem thread..... everything you've asked here is answered there... except maybe going back to cllean gb... if on an ns4g modem you won't be able to run any tw roms with it... but you can flash back to an epic modem pretty easily...
And I do believe that JB partitions different than other MTD ROMS and an Odin would be required to go backwards.
Sent from my SPH-D700 using Tapatalk 2
ummm...im on my mobile device and have no access to a laptop....if i could use the search function i would....kinda hoping for an answer.....thanks....
mcluvin1065 said:
ummm...im on my mobile device and have no access to a laptop....if i could use the search function i would....kinda hoping for an answer.....thanks....
Click to expand...
Click to collapse
If you can type a response, you can type in the search box.
Or you could go look in development for the thread labeled NS4G modem patch. It's been in the top 10 for at least 2 weeks.
Or you could go here:
http://forum.xda-developers.com/showthread.php?p=30433583
Which I linked from (gasp) my mobile device!
Sent from my SPH-D700 using Tapatalk 2
mcluvin1065 said:
ummm...im on my mobile device and have no access to a laptop....if i could use the search function i would....kinda hoping for an answer.....thanks....
Click to expand...
Click to collapse
Seriously... your phone doesn't have google??? And just so you know... I don't even own a computer right now, so that's no excuse... I do all my posting and searching right from the trusty old epic 4g....
I installed the Nexus S 4G modem on CM9.1 using CWM5. It was a two-step process: install actual radio from .zip and then apply a patch to CM9.1 from .zip.
The KL2 radio is attached--I downloaded it from the Nexus S' forums, I think. The patch was available from the Epic Dev forum. The thread with the CM9.1 patch also had patches for other MTD ROMs.
http://forum.xda-developers.com/showthread.php?t=1842037
When in doubt, restoring a CWM flash backup and using Odin to reinstall a Samsung modem returns you back to square one.
Today is my second day on the NS4G KL2 radio. With EC05/FC09 and CM7, the GPS was flaky and often refused to lock but battery life was stellar: with CM9, GPS just flat didn't work and the radios sucked the battery >5% an hour on idle. With KL2, GPS locks in the same indoor location within 5 seconds and the battery usage looks equivalent to CM7's, which for me was the best of all ROMs for battery life.
frostedunit said:
And I do believe that JB partitions different than other MTD ROMS and an Odin would be required to go backwards.
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
I went from JB to GB without odin and I didn't have any problems...I mean am I supposed to experience something weird?
Sent from my SPH-D700 using xda app-developers app
lmsomb said:
I went from JB to GB without odin and I didn't have any problems...I mean am I supposed to experience something weird?
Sent from my SPH-D700 using xda app-developers app
Click to expand...
Click to collapse
According to the CM10 thread you should.
Sent from my SPH-D700 using Tapatalk 2
lmsomb said:
I went from JB to GB without odin and I didn't have any problems...I mean am I supposed to experience something weird?
Sent from my SPH-D700 using xda app-developers app
Click to expand...
Click to collapse
Refer to my post in the [Q] Restoring backup from CM9 thread for a better explaination. I haven't updated the warning in the official cm10 thread yet.
EDIT: link
Sent from my SPH-D700 using xda app-developers app
bbelos said:
Refer to my post in the [Q] Restoring backup from CM9 thread for a better explaination. I haven't updated the warning in the official cm10 thread yet.
EDIT: link
Sent from my SPH-D700 using xda app-developers app
Click to expand...
Click to collapse
Was unaware that had changed. Thanks for setting me straight on that.
Sent from my SPH-D700 using Tapatalk 2
frostedunit said:
Was unaware that had changed. Thanks for setting me straight on that.
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
Well, things haven't really *changed*. The initial warning to use ODIN was just to be safe. But I ran through all the scenarios this morning to see what would happen and determine an easier solution.
Has anyone had a problem with not getting lte after flashing a rom? I am in an area that has lte. My friend with stock s3 can be right next to me and he gets lte while I don't.
I had stock everything and then rooted and flashed aokp by task and ktooneszrom. Do I need to flash the different modem or something?
Thanks
Ok sorry but is it turned on in settings? If you have checked that already try flashing a TW rom, then update profile and Prl. Also key into your dialer ##72786#
Transmitted with a portable device using Xparent Blue Tapatalk 2
Yup I've had that happen before, just like the last person said dial ##72786#
edfunkycold said:
Ok sorry but is it turned on in settings? If you have checked that already try flashing a TW rom, then update profile and Prl. Also key into your dialer ##72786#
Transmitted with a portable device using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
What is the easiest way to go from AOKP rom to a TW based rom? What rom would you recommend?
I would need to flash the firmware, kernel, and then rom, correct? I already made a nandroid backup.
Sorry, just want to make sure. Don't want to brick my phone.
irodex said:
What is the easiest way to go from AOKP rom to a TW based rom? What rom would you recommend?
I would need to flash the firmware, kernel, and then rom, correct? I already made a nandroid backup.
Sorry, just want to make sure. Don't want to brick my phone.
Click to expand...
Click to collapse
No just flash TPR it's a custom rom based on md4 it will give you options to choose kernel during install. Once booted you can do it all. You can use any firmware you want md4 is the latest and newest the new aosp roms built off of cm will need the md4 firmware.
Transmitted with a portable device using Xparent Blue Tapatalk 2
Preferably ones that don't have a modem, baseband or kernel. So I can flash them to my i317 and still retain WiFi Calling and other T-Mobile features...
Or how is the exact process of flashing any T889 rom's to the i317. I know ya gotta reflash the modem, but what else is there? Do I also need to relash a kernel of my choosing and baseband?
n1nj4Lo said:
Preferably ones that don't have a modem, baseband or kernel. So I can flash them to my i317 and still retain WiFi Calling and other T-Mobile features...
Or how is the exact process of flashing any T889 rom's to the i317. I know ya gotta reflash the modem, but what else is there? Do I also need to relash a kernel of my choosing and baseband?
Click to expand...
Click to collapse
All you have to do is remove Boot.img and the Modem files. I can do that for you but it is VERY risky to flash and I wouldn't do it on my phone.
Droid Premium said:
All you have to do is remove Boot.img and the Modem files. I can do that for you but it is VERY risky to flash and I wouldn't do it on my phone.
Click to expand...
Click to collapse
Right now I'm using teshxx's latest T-Mobile stock... I might just have to hunt down some rom mods like 4 way reboot menu and 23 toggle mode etc.
Prolly gonna stick with it for awhile to see if my old disappearing text messages bug rears it's ugly head again.
Sent from my SGH-T889 using Xparent BlueTapatalk 2
n1nj4Lo said:
Preferably ones that don't have a modem, baseband or kernel. So I can flash them to my i317 and still retain WiFi Calling and other T-Mobile features...
Or how is the exact process of flashing any T889 rom's to the i317. I know ya gotta reflash the modem, but what else is there? Do I also need to relash a kernel of my choosing and baseband?
Click to expand...
Click to collapse
Non of the Roms here have a modem. So you can flash them. I would recommend flashing a kernel after though. Having said that tweaked has an option for att set up so it'll work great and there are other users using it in att right now.
Sent from my SGH-T889 using xda app-developers app
n1nj4Lo said:
Right now I'm using teshxx's latest T-Mobile stock... I might just have to hunt down some rom mods like 4 way reboot menu and 23 toggle mode etc.
Prolly gonna stick with it for awhile to see if my old disappearing text messages bug rears it's ugly head again.
Sent from my SGH-T889 using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
foreverloco has a good 4-way reboot option. Check out that one!
n1nj4Lo said:
see if my old disappearing text messages bug rears it's ugly head again.
Sent from my SGH-T889 using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
Well that TouchWiz bug just happened again... Grrrr
I was there was an S4 Port!!
Maybe I'll try MIUI, PACman and all those rom's feel like something is missing for me...
I seen a post where the 4.2.2 Google edition rom was available to flash onto my tmobile S4, I was wondering if I can just flash it after wiping, or if I need the ktoonz kernel? I'm not even sure what the ktoonz kernel is, I've flashed ROMS before, just not on my s4. I'm rooted with twrp. And my build is the UVUAMDL one where I needed to get past boot loader lock thing. Sorry, I'm using my phone and I don't have the right links with me. Any help would be nice
Sent from my SGH-M919 using xda premium
I Highly suggest you don't flash anything until you read up on the forums and figure everything out. Read up on kernels, roms, gapps, bootloader, recovery etc. Then when you get that stuff down read about the roms you want to flash. If you flash am incorrect file you can hard brick your phone.
Sent from my SGH-M919 using xda app-developers app
lucas said:
I seen a post where the 4.2.2 Google edition rom was available to flash onto my tmobile S4, I was wondering if I can just flash it after wiping, or if I need the ktoonz kernel? I'm not even sure what the ktoonz kernel is, I've flashed ROMS before, just not on my s4. I'm rooted with twrp. And my build is the UVUAMDL one where I needed to get past boot loader lock thing. Sorry, I'm using my phone and I don't have the right links with me. Any help would be nice
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
Start here.
http://forum.xda-developers.com/showthread.php?t=2370213
I'm fairly familiar with flashing. I know my way around twrp and cwm. I just never knew what a kernel was.. Never needed to use one on my vibrant... So I know how to flash, that's not my question... I want to know if, with a stock rooted tmobile galaxy s4 (UVUAMDL), can I just flash the Google edition rom from twrp, then I'm good to go? And will I lose my root? It looks pretty straight forward, I just want to make sure my phone is Ok for the rom, and if I need the ktoonz file, cuz some people were mentioning it...
Sent from my SGH-M919 using xda premium
I flashed my T-Mobile version to a GE and it works fine... But mines is non rooted... You should be fine.
This is the one I should be flashing then, right?
http://forum.xda-developers.com/showthread.php?t=2341528
Sent from my SGH-M919 using xda premium
lucas said:
This is the one I should be flashing then, right?
http://forum.xda-developers.com/showthread.php?t=2341528
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
I already posted the link.
I was looking at that, so I wipe everything in twrp, and flash it like normal, but I'll lose root? Download the chainfire zip and install it in twrp as well to get root again?
Quick question, if I ever wanted to send my phone into get serviced, I can completely wipe my phone back to stock by flashing that back on the phone using Odin, correct? That would do the root as well, so when I sent it in, they would be none the wiser?
Sent from my Samsung Galaxy S4 using xda premium
And did I see somewhere that 4.3 doesn't have flash?
Sent from my Samsung Galaxy S4 using xda premium
lucas said:
And did I see somewhere that 4.3 doesn't have flash?
Sent from my Samsung Galaxy S4 using xda premium
Click to expand...
Click to collapse
Yea that's the version, get the odex version so everything works.
Jellybean doesn't have flash... It uses Google chrome as default browser unlike custom Roms that has a browser that has a browser built in.
Please read forum rules before posting
Questions and Help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Will there be completely stable versions of the Google edition s4 released sometime in the future? I'm just seeing way to many different versions of the same thing where some things aren't working properly, and it doesn't seem to be as simple as just flashing the rom. All sorts of other stuff needs to be done like changing build.prop and whatnot. I just want to be able to flash the rom and be done with it... Is that possible right now? Or no. I guess I'm not as familiar with all the terminology as I thought. I still don't know what a kernel really is, I flashed one once and it just made my cwm recovery menu different... And I know I needed a specific kernel to flash specific ROMS.. Is that the case here with these Google edition roms?
Sent from my Samsung Galaxy S4 using xda premium
Google edition 4.2.2 is stable
B. Dre said:
Google edition 4.2.2 is stable
Click to expand...
Click to collapse
Only thing that sucks is the home button lag, and you can't fix it since s voice is not even there.
Does anyone know if wifi calling works with GE rom?
It's a must for me.
Thanks!
radlink14 said:
Only thing that sucks is the home button lag, and you can't fix it since s voice is not even there.
Click to expand...
Click to collapse
You can install S Voice tho. It doesn't require TW.
amelnik said:
Does anyone know if wifi calling works with GE rom?
It's a must for me.
Thanks!
Click to expand...
Click to collapse
Only T-Mobile base ROM will have Wi-Fi calling as of now.
☞Sent from here☜
Monkz said:
You can install S Voice tho. It doesn't require TW.
Click to expand...
Click to collapse
Tried to install and the feature was unchecked automatically. Tried to turn on restart phone etc and nothing helped.
I really wonder how custom Roms don't have this home button lag and GE does. Weird
Sent from my SPH-L720 using xda app-developers app
lucas said:
I seen a post where the 4.2.2 Google edition rom was available to flash onto my tmobile S4, I was wondering if I can just flash it after wiping, or if I need the ktoonz kernel? I'm not even sure what the ktoonz kernel is, I've flashed ROMS before, just not on my s4. I'm rooted with twrp. And my build is the UVUAMDL one where I needed to get past boot loader lock thing. Sorry, I'm using my phone and I don't have the right links with me. Any help would be nice
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
The i9505G kernels work just fine.