Develop Bugs

[Q] help flashing new rom!! CM7?

I got a tmobile g2 off craigslist today and its already rooted with s-off. i want to flash cyanogenmod 7 have no idea how to go about it because my phone is already has a htc sence rom. can anyone help me out plz??? im asking questions cuz i dont wanna brick my phone like an idiot.

does the phone have clockwork revocery? if not download rom manager from the market and click flash recovery. if you have a rom installed you most likely have the recovery. still flash recovery to get the latest version which is required by cyanogenmod. download the rom you want with the gapps and put it on your sd card. boot into recovery and pick " wipe data/factory reset' after that choose "wipe cache partition". then "install zip from sd card" followed by "choose zip from sd card". then look around for the cyanogenmod and click on it. after it's flashed go to the gapps the same way you found the rom and flash them. reboot and you'll have your new rom.
any questions don't bother to ask.

ok thanks ill try it

anything you don't understand ask cuz we don't want anything to go wrong.

ok so i flashed a new rom and all went well. now when i try connecting to wifi (no dataplan) i cant for some reason. wifi starts but doesnt find my router. i try scanning and wifi turns off. i think its the new rom.. wifi worked fine before. what should i do??????? maybe find another rom??
btw i flashed android 2.3.1 gingervillain 1.4

Please just go read read read the guides and stickies. You'll be glad you did later when you dont have to keep asking questions to simple answers. And you'll be able to troubleshoot for yourself.
Things to think about:
1) Use ROM manager to make backups before you change anything significant
2) When switching roms, do a full data/cache/dalvik cache wipe before flashing
3) Don't do anything that you're not sure on. Research before you brick your phone.

Afterlife1991 said:
ok so i flashed a new rom and all went well. now when i try connecting to wifi (no dataplan) i cant for some reason. wifi starts but doesnt find my router. i try scanning and wifi turns off. i think its the new rom.. wifi worked fine before. what should i do??????? maybe find another rom??
btw i flashed android 2.3.1 gingervillain 1.4
Click to expand...
Click to collapse
Do a reboot (Usually these 2.3 builds require a reboot to fix WiFi). Did you wipe data and cache before flashing? You can also try a fix permissions.

i made a backup so its ok. and yea i did a data cache wipe.. ill try a reboot thx guys

martonikaj said:
Do a reboot (Usually these 2.3 builds require a reboot to fix WiFi). Did you wipe data and cache before flashing? You can also try a fix permissions.
Click to expand...
Click to collapse
thanks alot marton.. reboot fixed it. feel like a total newb lol. should have tried that earlier

Afterlife1991 said:
thanks alot marton.. reboot fixed it. feel like a total newb lol. should have tried that earlier
Click to expand...
Click to collapse
No worries. Glad I could help.

[Q] CM10 Stable - Completely Unstable and Broken

Hi there, I'm new to the forum but have been rooting for about a year. Here is my problem...
I was running stock firmware on my SGS3 and went through the standard cm10 root/rom install process. I flashed CMW with Odin, booted to recovery, installed cm10, jb gapps, cleared cache and delvik cache and rebooted. All the above processes worked fine and once it boots into JB, nothing seems to work. My home button does nothing, the top status bar is blank, no wifi, no keyboard (the process just crashes when I attempt to type).
I know this isn't an issue with CM10 on the SGS3 as this works for most people but does anyone have any ideas on how to remedy this? This may be a unique issue as I can't seem to find anyone else experiencing this.

Also...
I should also mention that I've tried a restore in recovery, reinstalled cm10, blah blah blah, and same results. I've also tried the cm10.m2 roms with the identical results. After reboot I don't even get the welcome wizard. It just boots right into the blank, default JB home screen and starts popping up process failure errors. I can navigate around (though the home button doesn't work) but can't use the keyboard etc.
Am I missing something? Is there a way for me to do a clean restore and try again?
Some technical info:
ClockworkMod Recovery v5.8.4.7
cm-10.0.0-d2att.zip
gapps-JB-20121130-signed.zip

Did you do a complete wipe? Data, cache, Davlik , System and then install cm10.
Coming from stock you need to fully wipe.
Sent from my SAMSUNG-SGH-I747 using xda premium

Machoscrawn said:
I should also mention that I've tried a restore in recovery, reinstalled cm10, blah blah blah, and same results. I've also tried the cm10.m2 roms with the identical results. After reboot I don't even get the welcome wizard. It just boots right into the blank, default JB home screen and starts popping up process failure errors. I can navigate around (though the home button doesn't work) but can't use the keyboard etc.
Am I missing something? Is there a way for me to do a clean restore and try again?
Some technical info:
ClockworkMod Recovery v5.8.4.7
cm-10.0.0-d2att.zip
gapps-JB-20121130-signed.zip
Click to expand...
Click to collapse
Your clockworkMod is out of date to run CM10 & the gapps. Upgrade to the latest clockwork mod, then the latest CM then the latest Gapps and you should be good to go.

dynamiclynk said:
Did you do a complete wipe? Data, cache, Davlik , System and then install cm10.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Thanks for the reply. This is what I did...
(Main cwm menu) -wipe cache partition
(Advanced) -wipe dalvik cache
+++go back+++
-reboot system now
Is there something additional I should clear?

Kweli87 said:
Your clockworkMod is out of date to run CM10 & the gapps. Upgrade to the latest clockwork mod, then the latest CM then the latest Gapps and you should be good to go.
Click to expand...
Click to collapse
Thanks for the reply,
How do i update to the latest clockworkMod? Do you happen to have a URL? I think I found the latest 6.something, but they all seem to be in .iso format.

You can't go from stock rom to CM10 without clearing factory reset thing in CWM.. I don't know the exact text string it uses but it should be right on top of clearing cache.. It looks like you only cleared cache and flashed a new rom.

i386W7 said:
You can't go from stock rom to CM10 without clearing factory reset thing in CWM.. I don't know the exact text string it uses but it should be right on top of clearing cache.. It looks like you only cleared cache and flashed a new rom.
Click to expand...
Click to collapse
Sorry I may have missed mentioning that. The first thing I did was the -factory restore/reset

If updating CWM doesn't help, I'd recommend re-downloading the CM10 zip and verifying the MD5 hash. It could be that the download got corrupted somehow...

goodtimes50 said:
If updating CWM doesn't help, I'd recommend re-downloading the CM10 zip and verifying the MD5 hash. It could be that the download got corrupted somehow...
Click to expand...
Click to collapse
Two questions:
1) What is the best way for me to update cwm?
2) I've seen this MD5 hash recommendation here and there. I have no idea what that means. How would I "verify the MD5 hash".

Machoscrawn said:
Two questions:
1) What is the best way for me to update cwm?
2) I've seen this MD5 hash recommendation here and there. I have no idea what that means. How would I "verify the MD5 hash".
Click to expand...
Click to collapse
Flash one of the rooted stock ROMs. Preferably an ICS one since you are on an older cwm. Wipe data, cache, dalvik. Download ROM manager from the play store. Update your recovery to the latest through that. Than flash back to cm10.

BAM1789 said:
Flash one of the rooted stock ROMs. Preferably an ICS one since you are on an older cwm. Wipe data, cache, dalvik. Download ROM manager from the play store. Update your recovery to the latest through that. Than flash back to cm10.
Click to expand...
Click to collapse
Ok thanks! I'm going to give that a shot and see how it goes.

Machoscrawn said:
Ok thanks! I'm going to give that a shot and see how it goes.
Click to expand...
Click to collapse
Ok so I tried flashing a stock rooted ICS ROM and now I'm stuck on the Samsung logo boot screen. Here is the method I tried, using Odin. http://forum.xda-developers.com/showthread.php?t=1739426
I used the "Bell Image (This works with Canadian Virgin Mobile SGH-I747M) - Old Image I747MVLALH1 (ICS 4.0.4)"
After flashing I booted into the stock recovery and cleared the cache partition then rebooted. Still stuck on the Samsung boot screen.
UPDATE: I just let it sit on the Samsung logo boot screen and it eventually loaded into ICS.

Machoscrawn said:
Two questions:
1) What is the best way for me to update cwm?
2) I've seen this MD5 hash recommendation here and there. I have no idea what that means. How would I "verify the MD5 hash".
Click to expand...
Click to collapse
1) I believe Rom Manager (from the Play Store) can do this.
2) Basically an MD5 value is generated when the file is created and is usually listed on the download page (on get.cm look for "md5sum" right under the download link for each build). There are apps that create an MD5 value from the file that you download and compare against the original to ensure that it's intact. If the values don't match, something's wrong with the file. Check out FastSum (there are lots of others out there too).

goodtimes50 said:
1) I believe Rom Manager (from the Play Store) can do this.
2) Basically an MD5 value is generated when the file is created and is usually listed on the download page (on get.cm look for "md5sum" right under the download link for each build). There are apps that create an MD5 value from the file that you download and compare against the original to ensure that it's intact. If the values don't match, something's wrong with the file. Check out FastSum (there are lots of others out there too).
Click to expand...
Click to collapse
Ok cool. Well i have downloaded ROM Manager but when I try to flash the latest recovery and it gives me a list of devices, mine isn't there. The only S3 listed is "Galaxy S3 (MetroPCS)". The list itself looks incomplete, maybe only 20 devices listed. I've rebooted the phone since installing ROM Manager but the list still only shows the one SGS3.

Machoscrawn said:
Ok cool. Well i have downloaded ROM Manager but when I try to flash the latest recovery and it gives me a list of devices, mine isn't there. The only S3 listed is "Galaxy S3 (MetroPCS)". The list itself looks incomplete, maybe only 20 devices listed. I've rebooted the phone since installing ROM Manager but the list still only shows the one SGS3.
Click to expand...
Click to collapse
Try to download GooManager and select the Flash Roms option, it will prompt you, select *Find one for me* reboot into recovery try to wipe/reset and reinstall the ROM and gapps and see if it works

wally3614 said:
Try to download GooManager and select the Flash Roms option, it will prompt you, select *Find one for me* reboot into recovery try to wipe/reset and reinstall the ROM and gapps and see if it works
Click to expand...
Click to collapse
Ok I tried the Goomanager route. When I'm in recovery doing the install of the rom, I get a FAILED error right after it tries updating partition... I've tried installing from internal and external sd with the same results...
I've attached a screenshot. Well I attempted to with my webcam, hopefully it's semi-readable.

Machoscrawn said:
Ok I tried the Goomanager route. When I'm in recovery doing the install of the rom, I get a FAILED error right after it tries updating partition... I've tried installing from internal and external sd with the same results...
I've attached a screenshot. Well I attempted to with my webcam, hopefully it's semi-readable.
Click to expand...
Click to collapse
Well at least you have the proper twrp definitely try and re download the ROM, carefully make sure it is absolutely the correct ROM(I rushed once, thought I was sure n dl'd the wrong one and bricked my older s3) if u have the slightest break during DL this can happen. I KNOW it is frustrating but worth it in the end

wally3614 said:
Well at least you have the proper twrp definitely try and re download the ROM, carefully make sure it is absolutely the correct ROM(I rushed once, thought I was sure n dl'd the wrong one and bricked my older s3) if u have the slightest break during DL this can happen. I KNOW it is frustrating but worth it in the end
Click to expand...
Click to collapse
Alright, I downloaded the latest stable (the only one) build of CM 10 from get.cm. Removed the current version from my internal sd and tried the process again. Same error...
So again, I'm now using GooManager, TeamWin Rocovery v2.3.1.0, CM10 Stable. Doing a factory reset, then wiping system, then install cm10, this is where it fails.
Any way that I can restore everything on my phone completely to stock and start from scratch? Anything else you/anyone can recommend?

Machoscrawn said:
Alright, I downloaded the latest stable (the only one) build of CM 10 from get.cm. Removed the current version from my internal sd and tried the process again. Same error...
So again, I'm now using GooManager, TeamWin Rocovery v2.3.1.0, CM10 Stable. Doing a factory reset, then wiping system, then install cm10, this is where it fails.
Any way that I can restore everything on my phone completely to stock and start from scratch? Anything else you/anyone can recommend?
Click to expand...
Click to collapse
If youre looking to completely start over. Just grab an unrooted stock .tar from one of the links somewhere around here, put your phone in download mode and let it flash. Clean slate.

Update ROM CyanogenMod 10.1 - WILD FOR THE NIGHT

Hello all,
I have a doubt about how I can update a ROM...
In this moment i have the next WILD-FOR-THE-NIGHT-03042013-d710
but I would like to update WILD-FOR-THE-NIGHT-03162013-d710
How I can do this... but without clear my apps..?
Or I need clear all?
Regards...

chanflee said:
Hello all,
I have a doubt about how I can update a ROM...
In this moment i have the next WILD-FOR-THE-NIGHT-03042013-d710
but I would like to update WILD-FOR-THE-NIGHT-03162013-d710
How I can do this... but without clear my apps..?
Or I need clear all?
Regards...
Click to expand...
Click to collapse
Why don't you use ti backup? It makes a backup of your apps and data
Though you could try dirty flashing but you will likely run into more issues
Though I would erase everything and clean flash the update
Laughing at you while eating jellybeans

gamepro602 said:
Why don't you use ti backup? It makes a backup of your apps and data
Though you could try dirty flashing but you will likely run into more issues
Though I would erase everything and clean flash the update
Laughing at you while eating jellybeans
Click to expand...
Click to collapse
ok but what app is better?
Regards...

chanflee said:
ok but what app is better?
Regards...
Click to expand...
Click to collapse
For backing up apps? Well titanium backup has a ton of options but if you don't want to spent $7 on an app then I would use carbon backup
Laughing at you while eating jellybeans

chanflee said:
Hello all,
I have a doubt about how I can update a ROM...
In this moment i have the next WILD-FOR-THE-NIGHT-03042013-d710
but I would like to update WILD-FOR-THE-NIGHT-03162013-d710
How I can do this... but without clear my apps..?
Or I need clear all?
Regards...
Click to expand...
Click to collapse
you shouldn't need to clean flash the nightly. just flash it. that's it.

Calisro,
what you mean with this... "you shouldn't need to clean flash the nightly. just flash it. that's it."..??
please explain me....
Regards

What he means is that what your trying to do is basically an update.
Your not flashing a different build or rom, your just updating your existing build.
Your just adding some updates and changes that the dev made so that your build is current.
Download update to your sd card, go to your recovery and flash away. (Probably wouldn't hurt to wipe cashe and dalvic)
You should check the rom thread, there may be specific instructions on how to update, usually if no special instruction is posted, its just a matter of flashing the update and rebooting.
By the way "clean flashing" is when you wipe all data, like factory reset.
Pp. :beer::thumbup:
From me to you on an Epic Touch running the best rom ever.

PanchoPlanet said:
What he means is that what your trying to do is basically an update.
Your not flashing a different build or rom, your just updating your existing build.
Your just adding some updates and changes that the dev made so that your build is current.
Download update to your sd card, go to your recovery and flash away. (Probably wouldn't hurt to wipe cashe and dalvic)
You should check the rom thread, there may be specific instructions on how to update, usually if no special instruction is posted, its just a matter of flashing the update and rebooting.
By the way "clean flashing" is when you wipe all data, like factory reset.
Pp. :beer::thumbup:
From me to you on an Epic Touch running the best rom ever.
Click to expand...
Click to collapse
So... I can upload only the rom and my apps not will be delete?

chanflee said:
So... I can upload only the rom and my apps not will be delete?
Click to expand...
Click to collapse
yes as long as you are just upgrading from cm to cm.

CM10.1 Freezing issue and message not sent error.

Hey guys,
First post here,
i was searching around for my problem, and i haven't found an accurate answer so thought to share my problem and hopefully find an answer.
i am from Canada, Edmonton, and i am with Rogers.
First problem,
i run CM 10.1 and Most the NIGHTLY updates they were butter smooth and works great, until Update number CM-10.120130317 till the current update. All the updates i download, my phone freezes LOT! example of how it freezes , i try to unlock my phone, it freezes . I try to write something it freezes . and sometimes when its on sleep it freezes i can't turn the screen on again! so i always downgrade to CM-10.120130316 to have that stable ROM.
I did the wipe date /factory reset from the ROM manager, and wipe cache and dalvik. and yet the problem is not solve.
So my question is, dose anyone facing the same problem? or it's just me?
Second Problem
am having this beyond annoying notification, where it says my message has not been sent! but my message get's sent and all acts normal. But i always get notification and its never gone. I have screen shoot the problem. Is there a way i can fix this? i've have attached in the thread.
if you guys have any questions or want me to provide some information please do ask.
Looking forward to hear the feedback.
Cheers,

for starts, you're running nightlies and you need to remember that. i'm not an advocate of these, but thats just my opinion. you generally cant run a non-perfected piece of software and repeatedly dirty flash layers of updates on top. you will generally begin to experience bugs that can only be fixed with a full wipe and clean install.
that being said, i would either 1) commit to these cm10.1 nightlies and perhaps even just stick with 1 of them thats working well for you or 2), find a stable 4.1 or 4.2 rom and install after a full wipe. backup first.

There's a warning that these builds are unstable and use them at your own risk. I use cm10.1 20130317 build and it is extremely stable. A few quirks but nothing major. I plan on sticking with it since the 3.4 kernel on the newer nightlies isn't optimized yet, which result is lower battery life.
Sent from my SAMSUNG-SGH-I747

xBeerdroiDx said:
for starts, you're running nightlies and you need to remember that. i'm not an advocate of these, but thats just my opinion. you generally cant run a non-perfected piece of software and repeatedly dirty flash layers of updates on top. you will generally begin to experience bugs that can only be fixed with a full wipe and clean install.
that being said, i would either 1) commit to these cm10.1 nightlies and perhaps even just stick with 1 of them thats working well for you or 2), find a stable 4.1 or 4.2 rom and install after a full wipe. backup first.
Click to expand...
Click to collapse
Domoo said:
There's a warning that these builds are unstable and use them at your own risk. I use cm10.1 20130317 build and it is extremely stable. A few quirks but nothing major. I plan on sticking with it since the 3.4 kernel on the newer nightlies isn't optimized yet, which result is lower battery life.
Sent from my SAMSUNG-SGH-I747
Click to expand...
Click to collapse
Thank you guys for the time to post in my thread. Alright, i will stick with update that runs well in my cellphone..
However for my second problem, do you know how i can fix that problem? i am talking about the message not sent notification.
Thanks in advance!

xBeerdroiDx said:
that being said, i would either 1) commit to these cm10.1 nightlies and perhaps even just stick with 1 of them thats working well for you or 2), find a stable 4.1 or 4.2 rom and install after a full wipe. backup first.
Click to expand...
Click to collapse
MH_91 said:
However for my second problem, do you know how i can fix that problem? i am talking about the message not sent notification.
Click to expand...
Click to collapse
assuming you have a stable backup to rely on, i would wipe data/factory rest, wipe cache, wipe dalvik cache and reflash either your current update or (preferably) the one you were running with no problems before. perhaps flash the one listed by a user above that seems to be running well

xBeerdroiDx said:
assuming you have a stable backup to rely on, i would wipe data/factory rest, wipe cache, wipe dalvik cache and reflash either your current update or (preferably) the one you were running with no problems before. perhaps flash the one listed by a user above that seems to be running well
Click to expand...
Click to collapse
Yes, i am have backed up all my stuff. oddly, i did all that you have mentioned last weekend, and still i got those glitches and the text matter it was gone at the start, but i got it back again.
Noob question, what dose "Flash" exactly means? maybe i know what flash step is, but i didnt know it was called by that term lol..

MH_91 said:
Yes, i am have backed up all my stuff. oddly, i did all that you have mentioned last weekend, and still i got those glitches and the text matter it was gone at the start, but i got it back again.
Noob question, what dose "Flash" exactly means? maybe i know what flash step is, but i didnt know it was called by that term lol..
Click to expand...
Click to collapse
and you tried flashing a different (previous) version of cm10.1 when you did that? there's always a full wipe. that includes formatting /system in recovery.
flash = install.

xBeerdroiDx said:
and you tried flashing a different (previous) version of cm10.1 when you did that? there's always a full wipe. that includes formatting /system in recovery.
flash = install.
Click to expand...
Click to collapse
Interesting.. i have got an idea i will try to do it hopefully by tonight or tomorrow. and i will share the results.
i was thinking to manually download the latest update nightlies instead of my phone update it for me, and then do the wipe thing and then i install it manually, maybe that will fix my problem.
am using G cloud for my backup and it dose his job pretty well. I wanted to use the Titanium backup but it kinda was too complicated for me.
Why they just don't call it "install" instead of Flash then lol?

MH_91 said:
Interesting.. i have got an idea i will try to do it hopefully by tonight or tomorrow. and i will share the results.
i was thinking to manually download the latest update nightlies instead of my phone update it for me, and then do the wipe thing and then i install it manually, maybe that will fix my problem.
am using G cloud for my backup and it dose his job pretty well. I wanted to use the Titanium backup but it kinda was too complicated for me.
Why they just don't call it "install" instead of Flash then lol?
Click to expand...
Click to collapse
avoid using the OTA update feature on your phone. i didnt know you were doing things that way. you'll notice many more bugs and problems that route.
you are on the right path when you say download the actual update (latest release) yourself. make sure you have the gapps to go with it. boot into cwm, wipe data/both cache, flash rom, flash gapps

xBeerdroiDx said:
avoid using the OTA update feature on your phone. i didnt know you were doing things that way. you'll notice many more bugs and problems that route.
you are on the right path when you say download the actual update (latest release) yourself. make sure you have the gapps to go with it. boot into cwm, wipe data/both cache, flash rom, flash gapps
Click to expand...
Click to collapse
Will do mate! Thank you so much for your kind help! i really appreciated it. i will for sure share the results with you very soon.
Have a good one.

[Q] Any JB 4.3 (or other JB) roms with working ringtone?

Having only dabbled with rooting and upgrading a Evo View tablet, I jumped into the deep end with my Incredible 2.
I got it to S-off and rooted and have been trying a few different ROMS (mostly chillybean's) and have what seems to be a common problem:
Sound works fine until a call is received. The ringtone fails to play and then sound doesn't work at all until its reset. I have had success resetting the sound by activating Google Voice Search with a long press of the search button. This seems to be true for CM10.2 and PAC. I didn't test this on an Evervolv because 3G never comes back on after Wi-fi has been turned on.
Has anybody had better luck with a particular 4.3 ROM? Does this sound issue affect pre-4.3 JB roms?
Thanks!

brettbee said:
Having only dabbled with rooting and upgrading a Evo View tablet, I jumped into the deep end with my Incredible 2.
I got it to S-off and rooted and have been trying a few different ROMS (mostly chillybean's) and have what seems to be a common problem:
Sound works fine until a call is received. The ringtone fails to play and then sound doesn't work at all until its reset. I have had success resetting the sound by activating Google Voice Search with a long press of the search button. This seems to be true for CM10.2 and PAC. I didn't test this on an Evervolv because 3G never comes back on after Wi-fi has been turned on.
Has anybody had better luck with a particular 4.3 ROM? Does this sound issue affect pre-4.3 JB roms?
Thanks!
Click to expand...
Click to collapse
I answered part of my own question:
I confirmed that the Evervplv nightly 2013.09.24 has a working ringtone. But once WiFi is turned on, 3G is off until reboot.

try beanstalk 1.300
brettbee said:
I answered part of my own question:
I confirmed that the Evervplv nightly 2013.09.24 has a working ringtone. But once WiFi is turned on, 3G is off until reboot.
Click to expand...
Click to collapse
I have been using beanstalk 1.300 with the b-team CM kernel.it has 4.2.2 and everything works! its fast and smooth with great battery life the 4.3 roms have some issues so I am gonna stick with this one

AFAIK everything in the newest Evervolv works.

phillibl said:
AFAIK everything in the newest Evervolv works.
Click to expand...
Click to collapse
Are you using a nightly? Which one?
Does 3G come back after WiFi is turned on?

Chillybean updated his CM10.2 ROM -- the 20130929 build has the sound issue fixed.

kahlil88 said:
Chillybean updated his CM10.2 ROM -- the 20130929 build has the sound issue fixed.
Click to expand...
Click to collapse
The 929 rom is not working for me and I know at least of couple of other folks in the same situation.
Are you using the 929 ROM with sound successfully? What - exactly - did you do to install it? I'm wondering if it's a I'm-doing-something-stupid/wrong thing or maybe a hardware revision thing.
Thanks!

brettbee said:
The 929 rom is not working for me and I know at least of couple of other folks in the same situation.
Are you using the 929 ROM with sound successfully? What - exactly - did you do to install it? I'm wondering if it's a I'm-doing-something-stupid/wrong thing or maybe a hardware revision thing.
Click to expand...
Click to collapse
Flashed it like any new ROM. Backup important data and reboot into recovery mode. Once in recovery mode:
Factory reset
Wipe cache
Advanced -> wipe dalvik cache
Mount/unmount -> format system
Format boot
Install AntiVenom SDW
Flash a ROM
Flash GApps
Wipe dalvik cache
Reboot and you should be golden. I've had it hang at the boot screen a few times, had to start over and skip installing GApps until I was sure it would boot.

kahlil88 said:
Flashed it like any new ROM. Backup important data and reboot into recovery mode. Once in recovery mode:
Factory reset
Wipe cache
Advanced -> wipe dalvik cache
Mount/unmount -> format system
Format boot
Install AntiVenom SDW
Flash a ROM
Flash GApps
Wipe dalvik cache
Reboot and you should be golden. I've had it hang at the boot screen a few times, had to start over and skip installing GApps until I was sure it would boot.
Click to expand...
Click to collapse
Thanks! I'll give that a try. I wasn't quite as thorough with wiping/formatting as you were. Fingers crossed....

kahlil88 said:
Flashed it like any new ROM. Backup important data and reboot into recovery mode. Once in recovery mode:
Factory reset
Wipe cache
Advanced -> wipe dalvik cache
Mount/unmount -> format system
Format boot
Install AntiVenom SDW
Flash a ROM
Flash GApps
Wipe dalvik cache
Reboot and you should be golden. I've had it hang at the boot screen a few times, had to start over and skip installing GApps until I was sure it would boot.
Click to expand...
Click to collapse
brettbee said:
Thanks! I'll give that a try. I wasn't quite as thorough with wiping/formatting as you were. Fingers crossed....
Click to expand...
Click to collapse
Well, that didn't work for me. The only thing I didn't do was "Format boot." I couldn't find that in Revolutionary CMW.
I'm thinking there's something different about my phone. Hardware? How I rooted it?

brettbee said:
Well, that didn't work for me. The only thing I didn't do was "Format boot." I couldn't find that in Revolutionary CMW.
I'm thinking there's something different about my phone. Hardware? How I rooted it?
Click to expand...
Click to collapse
What version of gapps are you installing? Try flashing the ROM without installing gapps and see if it will boot, then if you're successful go back into recovery mode and flash gapps-jb-20130813-signed.zip from here.

funny question, does docking mode work with these roms?

Check Chilly's forum. The Inc S Dev posted a flashable fix for the sound problems. I flashed it and all is fine.
EDIT: Damn autocorrect...
Sent from my Nexus 7 using xda app-developers app

flinzak said:
Check Chilly's forum. The Inc S Dev posted a flashable fix for the sound problems. I flashed it and all is fine.
EDIT: Damn autocorrect...
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Thanks - found it and downloaded it! I'll give it a try when I can have my phone out of service.....

I flashed Evervolv 10/30 nightly yesterday and it looks like they have the 3G/WiFi toggle issue resolved. The quick settings were missing but, I'm guessing that'll be corrected in the next build. Also, flashed B-Team Kernel. 4.3-s2w version resulted in bootloops but, the 4.3-v2 version worked just fine. No sound issues as far as I can tell.

Does the latest Everlov nightly work? Also what are you all referring to when you say Chilly's forum, the "Inc S dev fix", and AntiVenom SDW? I went through 5-10 of the most recent pages on Everlov and didn't see any of these things, so would someone mind providing links?
Thanks

jonatcer said:
Does the latest Everlov nightly work? Also what are you all referring to when you say Chilly's forum, the "Inc S dev fix", and AntiVenom SDW? I went through 5-10 of the most recent pages on Everlov and didn't see any of these things, so would someone mind providing links?
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2049902 this is chillybean's thread you can find AntivenomSDW in the other section of the OP (first post) the inc S dev fix can be found here http://d-h.st/1h6

ArslanQureshi said:
http://forum.xda-developers.com/showthread.php?t=2049902 this is chillybean's thread you can find AntivenomSDW in the other section of the OP (first post) the inc S dev fix can be found here http://d-h.st/1h6
Click to expand...
Click to collapse
Alright thanks a bunch. One more question though - what exactly is AntivenomSDW? Where can I find more information on it? Google is little help here.

jonatcer said:
Alright thanks a bunch. One more question though - what exactly is AntivenomSDW? Where can I find more information on it? Google is little help here.
Click to expand...
Click to collapse
its an flashable zip that completely wipes your device it is highly recommended to use whenever you flash a new rom it is developed by Chillybean

ArslanQureshi said:
its an flashable zip that completely wipes your device it is highly recommended to use whenever you flash a new rom it is developed by Chillybean
Click to expand...
Click to collapse
Alright thanks a bunch.
Would you, or anyone else still reading this thread, care to weight in on whether Evervolv or CB's rom (Which? Beanstalk?) is more stable?