I am currently on ICS 4.0.4 stock AT&T, rooted, CWM installed.
Will the update to JB unroot the phone?
What about the apps I have installed and personal data?
Will it replace CWM back with stock recovery mode?
Please explain if you know how it's gonna work
ighost77 said:
I am currently on ICS 4.0.4 stock AT&T, rooted, CWM installed.
Will the update to JB unroot the phone?
What about the apps I have installed and personal data?
Will it replace CWM back with stock recovery mode?
Please explain if you know how it's gonna work
Click to expand...
Click to collapse
Well, you won't be able to install it over the air since those updates require the stock recovery to be in place. To maintain root you'd have to wait until somebody posts a rooted version of the room and flash it via Odin.
I'm assuming you can keep your personal data as is, since when I flashed via Odin from Stock to Rooted it remained.
Related
If my S3 is stock rom but rooted with cwm recovery loaded, will I be able to get the AT&T OTA JB update once it rolls out with no issues? I understand I might lose root, but is that it? I know it will be a couple more months, just want to be sure the phone will be able to get this with no issues when the time comes.
wiz4769 said:
If my S3 is stock rom but rooted with cwm recovery loaded, will I be able to get the AT&T OTA JB update once it rolls out with no issues? I understand I might lose root, but is that it? I know it will be a couple more months, just want to be sure the phone will be able to get this with no issues when the time comes.
Click to expand...
Click to collapse
From what I understand, you need the stock recovery in place for OTA updates, otherwise they will fail. Which makes sense.
Ok that makes since, so closer to go time I can just put the stock recovery.img on there right?? Is it that simple?
wiz4769 said:
Ok that makes since, so closer to go time I can just put the stock recovery.img on there right?? Is it that simple?
Click to expand...
Click to collapse
flash to stock via Odin, so yes...
-Ryan
Or you could just wait until the update drops and somebody posts a stock rooted version and update it through Odin.
Ok so have to flash the stock rom itself and not just the recovery. I have only really used an older Galaxy S1 to mess with flashing and stuff and never cared about the apps and everything, just would put a rom on there and when needed put it back to stock(borrowed it for a couple months). So if I do a titanium backup of apps+system data I can flash the stock rom, I assume root again and then restore the apps? let it update and Im done, or assuming the stock At&T JB rom is available on XDA I can just flash it on there, root and restore from titanium? Those are the 2 options if I want to stick with stock right?
wiz4769 said:
Ok so have to flash the stock rom itself and not just the recovery. I have only really used an older Galaxy S1 to mess with flashing and stuff and never cared about the apps and everything, just would put a rom on there and when needed put it back to stock(borrowed it for a couple months). So if I do a titanium backup of apps+system data I can flash the stock rom, I assume root again and then restore the apps? let it update and Im done, or assuming the stock At&T JB rom is available on XDA I can just flash it on there, root and restore from titanium? Those are the 2 options if I want to stick with stock right?
Click to expand...
Click to collapse
Right, but it's not usually recommended that you install apps+data with TiBu; better to just install apps only.
-Ryan
Got ya, I do a backup with apps and data to be safe, but you can just restore apps only from that right?
wiz4769 said:
Got ya, I do a backup with apps and data to be safe, but you can just restore apps only from that right?
Click to expand...
Click to collapse
You can. Though could also just let the Play Store redownload your apps for you.
So, like most people this morning, got the OTA notif. I'm on stock Rogers roms but rooted. What's the best way to get that update without having to restore phone? Don't care if i lose root or CWM as we can get them back.
polish_pat said:
So, like most people this morning, got the OTA notif. I'm on stock Rogers roms but rooted. What's the best way to get that update without having to restore phone? Don't care if i lose root or CWM as we can get them back.
Click to expand...
Click to collapse
As long as you never flashed the modified recovery (Clockwork, etc..) then you can do the update and wont lose anything but root. But since you have CWM installed, you'll need to flash the stock ROM (like I did) and retry the update. I didn't lose any settings when I flashed the fully stock Rogers ROM.
and after, how do i root again?
Just Odin the LG1 image from this thread. It will update you to LG1 and include root in the process.
http://forum.xda-developers.com/showthread.php?t=1739426
*edit* just noticed you are in Rogers.
Sent from my SGH-I747 using xda premium
If I root my S3 will I still be able to get the OTA updates? I rooted my Atrix and after that I couldn't get the OTA updates. Also what is the best ROM?
anaylor01 said:
If I root my S3 will I still be able to get the OTA updates? I rooted my Atrix and after that I couldn't get the OTA updates. Also what is the best ROM?
Click to expand...
Click to collapse
If you don't need a specific feature from the stock firmware (gestures, wifi calling, etc), just get CM or AOKP and save yourself a headache.
Best? As far as stock? I've read LI6 is decent.
Well with my Atrix when Android 3.0 came out I wasn't able to update it because I was rooted. So my question is when Jelly Bean comes out will I be able to update it to Jelly bean if I am rooted or have a custom rom installed?
anaylor01 said:
Well with my Atrix when Android 3.0 came out I wasn't able to update it because I was rooted. So my question is when Jelly Bean comes out will I be able to update it to Jelly bean if I am rooted or have a custom rom installed?
Click to expand...
Click to collapse
3.0 wasn't even for phones. If you install custom recovery you will not be able to receive an OTA until you flash the stock recovery. Just use a jellybean ROM.
Sent from my SGH-T999
joshnichols189 said:
If you install custom recovery you will not be able to receive an OTA until you flash the stock recovery.
Click to expand...
Click to collapse
How can this be true? This is what I did.
Restored a UVALEM nandroid (via CWM). It was the original firmware on the phone when I bought it (no custom install, but I rooted with the Sprint method a couple weeks prior), I just happened to keep this backup.
Reset factory defaults.
Nandroid again for clean UVALEM backup.
Use Software > About phone > Software update to get the UVALH2 update. It was ~90mb.
Phone rebooted after it was done.
Dropped into CWM to make another backup (CWM still here, was never removed).
Downloaded LI6 JB OTA from SamMobile. Installed that from CWM.
I have LI6, never removed CWM. And it is still there. Root should be, although I did not test to confirm.
If you can't receive OTAs with custom recovery/root, how did this work? Is it a feature that was not active in the UVALH2 build? What about the LI6 build I flashed from CWM?
Aerowinder said:
How can this be true? This is what I did.
Restored a UVALEM nandroid (via CWM). It was the original firmware on the phone when I bought it (no custom install, but I rooted with the Sprint method a couple weeks prior), I just happened to keep this backup.
Reset factory defaults.
Nandroid again for clean UVALEM backup.
Use Software > About phone > Software update to get the UVALH2 update. It was ~90mb.
Phone rebooted after it was done.
Dropped into CWM to make another backup (CWM still here, was never removed).
Downloaded LI6 JB OTA from SamMobile. Installed that from CWM.
I have LI6, never removed CWM. And it is still there. Root should be, although I did not test to confirm.
If you can't receive OTAs with custom recovery/root, how did this work? Is it a feature that was not active in the UVALH2 build? What about the LI6 build I flashed from CWM?
Click to expand...
Click to collapse
I don't know, clockworkmod is supposed to block the installation of OTA updates.
Sent from my SGH-T999
Hmm, I'm using 6.0.1.2, and it does ask me if I want to disable /system/etc/install-recovery.sh, when I try to exit.
Hi,
I am on E980 ATT 4.1.2 stock. I have unrooted and also installed CWM 6.0.4.7.
I haven't yet gotten a notification for an upgrade to KK, but I am wondering.
#1 If I upgrade over the air, will it brick my phone since it's rooted and has a custom recovery?
#2 If I do want to upgrade, what's the best method for upgrading and will I have to unroot and remote CWM?
Thanks
badnaam said:
Hi,
I am on E980 ATT 4.1.2 stock. I have unrooted and also installed CWM 6.0.4.7.
I haven't yet gotten a notification for an upgrade to KK, but I am wondering.
#1 If I upgrade over the air, will it brick my phone since it's rooted and has a custom recovery?
#2 If I do want to upgrade, what's the best method for upgrading and will I have to unroot and remote CWM?
Thanks
Click to expand...
Click to collapse
Hi there,
several manufacturers and providers do not send or cannot send the updates because of certain rooting means.
If you see the window with message: "No updates available for your device." or "The latest updates have already been installed.", then you will receive the updates inspite of root access.
But you must flash a stock recovery before or even flash the whole stock ROM. Via custom recovery and rooted ROM stock updates cannot succeed.
Mine was rooted with stock recovery and the upgrade process went fine this week. Since you're on CWM recovery I'd say don't do it. When the last upgrade came out and I was running a custom recovery and it boot looped my phone (as well as everyone else's phones).
As best I know your only option is to restore phone to stock and take upgrade, then root, install recovery and all your apps/settings. Its a beeyotch right?
I rooted my dad's phone a while back ago so he can use tethering in case of emergencies etc. He recently got a smart watch and I wanted to updated it so that he can use it. But it has not been touched since that day. I essentially want rooted stock rom, I'm unaware of where to find that the closest I can find is StockMod kitkat. Which seems to not work on ATT phones? I just want to make sure that I don't brick his only phone on christmas. So is there something I should be aware of?
His model is SGH-i747
Baseband
i747UCDLK3
Build number
jro03
So how do I go about upgrading it? Can I just flash TWRP and flash any rom using TWRP?
I found this, so I should install new TWRP, then flash a specified kernel then flash rom? would this be safe route?
Some of the latest ROMs require a 4.4.2 bootloader and modem.
The simplest and safest way to get the latest bootloader may be to flash back to unrooted stock 4.1.1 and run OTA updates until the phone is running the latest KK ROM. You can then flash TWRP or CWM and a custom ROM.
audit13 said:
Some of the latest ROMs require a 4.4.2 bootloader and modem.
The simplest and safest way to get the latest bootloader may be to flash back to unrooted stock 4.1.1 and run OTA updates until the phone is running the latest KK ROM. You can then flash TWRP or CWM and a custom ROM.
Click to expand...
Click to collapse
Would this require flashing with ODIN? I just want it so that it works with root is not required anymore.
Yes, you would flash the 4.1.1 stock ATT ROM via Odin. I prefer Odin 3.07.
You cannot install OTA updates with root.
You can try flashing just the bootloader and modem but I prefer the long slow route of OTA updates.
I rather do it this way, manually so my dad can enjoy it today. I was wondering how can I update it's TWRP? it's at 2.3 but the TWRP manager keeps crashing when I update it.
I highly recommend the latest d2lte version of Philz Touch for recovery.
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
Ok I ****ed up, flash that kernel and did whatever and bam ****ed up. Not working... ****, I still ahve download mode and Recovery but it will not boot into the OS. I get a flash of samsung and then nothing else happends...****
I decided to flash stock DLK3 in odin. Then let the updates take it course (my dad doesn't need root) Where Can I find the file?
The stock ATT firmware is on sammobile.com.
If you want root, OTA to the latest 4.4.2, install Philz, flash supersu via recovery.