Hi all,
I recently flashed CM10 but want to go back to Rogers stock ROM for now (my nandroid got erased accidentally)
Where do i find the rogers ROM ?
Do I need to change the kernel ?
And most importantly, will it work as stock lol ??
Thanks in advance
captiv123 said:
Hi all,
I recently flashed CM10 but want to go back to Rogers stock ROM for now (my nandroid got erased accidentally)
Where do i find the rogers ROM ?
Do I need to change the kernel ?
And most importantly, will it work as stock lol ??
Thanks in advance
Click to expand...
Click to collapse
I just did this for my Telus SIII, if you check SAMMobile.com, and click firmware in the top corner and search "I747" (which is the GSIII model), you can download a tar md5 of the stock ROM which for me replaced my kernel, radio, and OS with the stock, even showed as Samsung Official in download mode. Once you have that file, you can use Odin to restore it to factory defaults.
Hope this helps!
Here's a thread with the canadian stock roms as well
http://forum.xda-developers.com/showthread.php?t=1752729
Sent from my SGH-I747M using xda app-developers app
Related
Hey I accidentally deleted my stock backup and I just downloaded the file with the stock firmware and was just wondering how I would go about making my phone stock again. Is there a way I can flash the stock firmware I downloaded through clockwork recovery? Thanks!
I've got a Samsung Galaxy SIII with bell.
Yzaemar said:
Hey I accidentally deleted my stock backup and I just downloaded the file with the stock firmware and was just wondering how I would go about making my phone stock again. Is there a way I can flash the stock firmware I downloaded through clockwork recovery? Thanks!
I've got a Samsung Galaxy SIII with bell.
Click to expand...
Click to collapse
The only stock room I know of (flashable) are stock with root injected.
If you want true stock you'll need to Odin back to stock.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Yzaemar said:
Hey I accidentally deleted my stock backup and I just downloaded the file with the stock firmware and was just wondering how I would go about making my phone stock again. Is there a way I can flash the stock firmware I downloaded through clockwork recovery? Thanks!
I've got a Samsung Galaxy SIII with bell.
Click to expand...
Click to collapse
stock unrooted firmware's are located here: http://forum.xda-developers.com/showthread.php?t=1968625. download the file for your specific device and flash in odin. you may have to perform a factory reset after flashing. i would. root-injected stock firmware is here: http://forum.xda-developers.com/showthread.php?t=2098526. cheers
I wonder is this possible or will it brick my phone? Currently I am experiment it with Stock 4.2.2 XME ROM. Is it possible to downgrade it back to 4.1.2? Thanks in advance.
soralz said:
I wonder is this possible or will it brick my phone? Currently I am experiment it with Stock 4.2.2 XME ROM. Is it possible to downgrade it back to 4.1.2? Thanks in advance.
Click to expand...
Click to collapse
Yes...
sent from my GT-I9082
of course possible..just download 4.1.2 firware and flash with odin..:good:
boudhayan said:
of course possible..just download 4.1.2 firware and flash with odin..:good:
Click to expand...
Click to collapse
Thanks, I've reverted back to 4.1.2.
sorry guys.. where i can find 4.1.2 xme version
I am unable to revert back to 4.1.2
soralz said:
Thanks, I've reverted back to 4.1.2.
Click to expand...
Click to collapse
Hello,
Thank you in advance who ever reply to this.
Problem is i updated my device to 4.2.2 recently with odin. Before doing that I made a (nand) backup of my 4.1.2 stock rom.
As most people having problems with 4.2.2. my phones heats up and battery draining quickly 3 hours and its 10% which is very bad.
When I try to restore 4.1.2 nand , My phone gets stuck on "Samgung Galaxy grand i9082" logo and nothing happens. I restored 4.2.2 backup and its working fine.
I assume its kernal problem. Can i restore kernal to 4.1.2 with odin? I do have stock firmware downloaded already.
Thank you!
hi_blues said:
Hello,
Thank you in advance who ever reply to this.
Problem is i updated my device to 4.2.2 recently with odin. Before doing that I made a (nand) backup of my 4.1.2 stock rom.
As most people having problems with 4.2.2. my phones heats up and battery draining quickly 3 hours and its 10% which is very bad.
When I try to restore 4.1.2 nand , My phone gets stuck on "Samgung Galaxy grand i9082" logo and nothing happens. I restored 4.2.2 backup and its working fine.
I assume its kernal problem. Can i restore kernal to 4.1.2 with odin? I do have stock firmware downloaded already.
Thank you!
Click to expand...
Click to collapse
Nope, 4.1.2 and 4.2.2 kernel arent't compatible.
Means i am stuck with 4.2.2 forever
soralz said:
Nope, 4.1.2 and 4.2.2 kernel arent't compatible.
Click to expand...
Click to collapse
Thank you for your reply.
It means that there is no way to go back to 4.1.2
I was thinking if i could:
1. Flash 4.1.2 stock firmware which will return me 4.1.2 stock kernal. (with odin).:fingers-crossed:
2. Once i am on 4.1.2 kernal i restore my nand and get back to my stock rooted rom.
Any ideas?
EDIT:
I tried it and end up in boot loop. I have no idea of which firmware my phone had. because i purchased it online and was shipped from Hong Kong. Manufactured in veitnam . I tried Veitnam firmware , Malaysian and now i will try india, pakistan, KSA respectively. This thread is not that active.
Anyone whos reading if you have any suggestions please try to help me.
Thank you
hi_blues said:
Thank you for your reply.
It means that there is no way to go back to 4.1.2
I was thinking if i could:
1. Flash 4.1.2 stock firmware which will return me 4.1.2 stock kernal. (with odin).:fingers-crossed:
2. Once i am on 4.1.2 kernal i restore my nand and get back to my stock rooted rom.
Any ideas?
EDIT:
I tried it and end up in boot loop. I have no idea of which firmware my phone had. because i purchased it online and was shipped from Hong Kong. Manufactured in veitnam . I tried Veitnam firmware , Malaysian and now i will try india, pakistan, KSA respectively. This thread is not that active.
Anyone whos reading if you have any suggestions please try to help me.
Thank you
Click to expand...
Click to collapse
Try to follow me
After flash your stock rom:
Reboot phone in Recovery Mode (press and hold Volume Down buttons + Home + Power)
wipe cache partition and wipe data/factory reset
reboot>>>>
Have fun
Hey guys,
I'm trying to go back to a stock Touchwiz ROM from CyanogenMod 10.2. My only problem is, I can't Odin back to a stock from because the only Odin compatible file I have is 4.1.1 which my phone will no longer go to since my baseband was updated after trying a former 4.3 ROM.
Can anyone link me to a 4.3 ROM that I can flash in Odin? I'm asking because most of the ROM's I'm finding that are 4.3 require you to be on a TW ROM before flashing their ROM. Thanks.
n_alvarez2007 said:
Hey guys,
I'm trying to go back to a stock Touchwiz ROM from CyanogenMod 10.2. My only problem is, I can't Odin back to a stock from because the only Odin compatible file I have is 4.1.1 which my phone will no longer go to since my baseband was updated after trying a former 4.3 ROM.
Can anyone link me to a 4.3 ROM that I can flash in Odin? I'm asking because most of the ROM's I'm finding that are 4.3 require you to be on a TW ROM before flashing their ROM. Thanks.
Click to expand...
Click to collapse
Go to http://www.sammobile.com/firmwares/and put in your phone info and download the stock file.
Satstalker said:
Go to http://www.sammobile.com/firmwares/and put in your phone info and download the stock file.
Click to expand...
Click to collapse
This link is useless for me as it does not have a 4.3 stock rom listed in their official firmwares. They have only up to 4.1.2 which I cannot Odin back to since my baseband was already updated.
n_alvarez2007 said:
This link is useless for me as it does not have a 4.3 stock rom listed in their official firmwares. They have only up to 4.1.2 which I cannot Odin back to since my baseband was already updated.
Click to expand...
Click to collapse
Maybe there is no update for your carrier yet! A thanks would be nice for trying to help you. But hey next time i wont even reply
|ROM|Bootloader|Kernel|Modem| AT&T Official 4.3 MJB |24 Nov 2013| There you go all stock. make sure you hit the thanks button for everyone (not my files I just found them)
You cant flash this in odin but can use TWRP or CWM. will get you back all stock. Good luck...
theramsey3 said:
|ROM|Bootloader|Kernel|Modem| AT&T Official 4.3 MJB |24 Nov 2013| There you go all stock. make sure you hit the thanks button for everyone (not my files I just found them)
You cant flash this in odin but can use TWRP or CWM. will get you back all stock. Good luck...
Click to expand...
Click to collapse
Do I have to be on a stock rom to use this? I'm currently on Quantum V3 and I don't have access to a stock rom to revert to since my baseband was updated.
n_alvarez2007 said:
Do I have to be on a stock rom to use this? I'm currently on Quantum V3 and I don't have access to a stock rom to revert to since my baseband was updated.
Click to expand...
Click to collapse
No you don't have to be on the stock rom to use that, but the bootloaders are for 4.3 so if you haven't updated yet this will update you.
You can flash any rom you want to as long as you do not mess with the bootloader you will be OK. I do not know if this work on anything besides an at&t phone using it on anything else is done so at your own risk just the same as using it.
What about the recovery? any way to get a stock recovery image?
Hello, I am currently rooted and have CWM 6.0.4.3. installed. I'm on CM11 but want to go back to stock.. Is there an easy way to keep root and go back to stock. Want stock for a few functions that ROMS dont seem to be offering but can keep root and CWM ??
Thanks.
Which phone do you have? You could try flashing a pre-rooted stock ROM via Odin. Then use Odin to flash CWM.
Bt its better to firstly install ur stock rom and then again root it as it takes no longer than 5 mins
DeathNotice said:
Bt its better to firstly install ur stock rom and then again root it as it takes no longer than 5 mins
Click to expand...
Click to collapse
Ok perfect, thats what I was looking for. Phone btw is S3 - d2att - SGH i747) Sounds good to install the stock rom and re-root.. I'm sure its here but I have searched everywhere to find a tutorial on this and I cannot find a straight answer.
Would you mind giving me the steps or pointing me to a thread that explains how to and has the files in need to download ?
audit13 said:
Which phone do you have? You could try flashing a pre-rooted stock ROM via Odin. Then use Odin to flash CWM.
Click to expand...
Click to collapse
Do you know if there is a step by step on this somewhere ? I dont mind going back to complete stock.. I can just re-root and flash CWM after.
OR
Maybe you could just answer the bigger question : the reason I want to go back to stock is I need to use MHL/HDMI which CM11 doesnt support. I dont want to go back to stock, I would rather even go to another ROM that supports mhl/hdmi.. but if I have to go to stock, than so be it.?
Were you running the stock AT&T 4.3 ROM before you switched to CM11?
audit13 said:
Were you running the stock AT&T 4.3 ROM before you switched to CM11?
Click to expand...
Click to collapse
Yes, I bought the phone new and was running stock, Canadian Rogers version and had changed to CM10, then to 11.
robberrobbie said:
Yes, I bought the phone new and was running stock, Canadian Rogers version and had changed to CM10, then to 11.
Click to expand...
Click to collapse
Since you installed a custom recovery, that would have tripped the Knox counter which voids the warranty. It's not a problem if the phone is working properly.
Did you update to 4.3 or did it come with 4.3?
You may be better off installing a pre-rooted ROM.
http://forum.xda-developers.com/showthread.php?t=1739426
audit13 said:
Since you installed a custom recovery, that would have tripped the Knox counter which voids the warranty. It's not a problem if the phone is working properly.
Did you update to 4.3 or did it come with 4.3?
You may be better off installing a pre-rooted ROM.
http://forum.xda-developers.com/showthread.php?t=1739426
Click to expand...
Click to collapse
It was quite some time ago but I believe I was on ICS 4.0.. and switch to CM from there. Im not worried about the counter for warranty, that's expired on my unit anyways. I just want to be able to use MHL/HDMI function.. so if fine with flashing pre-rooted.. or stock.. or a different ROM that support MHL/HDMI. Can you recommend the easiest route ?
robberrobbie said:
It was quite some time ago but I believe I was on ICS 4.0.. and switch to CM from there. Im not worried about the counter for warranty, that's expired on my unit anyways. I just want to be able to use MHL/HDMI function.. so if fine with flashing pre-rooted.. or stock.. or a different ROM that support MHL/HDMI. Can you recommend the easiest route ?
Click to expand...
Click to collapse
I asked about 4.3 because the 4.3 bootloader cannot be downloaded. Flashing via mobile Odin will not touch the bootloader or modem.
You could try a pre-rooted rom and then flash a custom recovery via Odin.
I use Philz Touch from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
audit13 said:
I asked about 4.3 because the 4.3 bootloader cannot be downloaded. Flashing via mobile Odin will not touch the bootloader or modem.
You could try a pre-rooted rom and then flash a custom recovery via Odin.
I use Philz Touch from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
Click to expand...
Click to collapse
Ok thanks, I will do that. 1 thing I'm not quite sure of is the bootloader situation ? In the first tutorial there is a note : Flashing a prior bootloader can hard/soft brick your device. How do I know ?
I see the steps as:
Extract tar file you downloaded.
Use Odin, put phone into download mode [with phone off, hold vol. down + home + power ], connect to computer and open Odin.
once in odin click the PDA field and select the tar file
Leave Auto Reboot and F. Reset Time checked.
click start and when done let phone reboot.
If you just want a stock, rooted phone with no custom recovery, no plans to flash custom roms, etc. then you can stop HERE.
For my situation, is it just that easy ?
Before flashing, verify the version of your bootloader.
audit13 said:
Before flashing, verify the version of your bootloader.
Click to expand...
Click to collapse
OK I have made an effort to go read and figure out how to find out what version of bootloader on my own.. But i cannot find ? Any chance you know... And could help?
You mentioned your have the i747 and Rogers. Do you have the AT&T s3 (i747) or Rogers/Bell/Telus s3 (i747m)?
What is the most recent stock ROM you had on your phone?
Hey. I got the i747m. As for what was the last stock ROM I had, can't say. I know when I bought the phone it was ICS and I had received and update to jellybean.. But them went to cm10. The tutorial I followed told me had me back everything up, which I did. Have it in a file somewhere on my comp, would that tell me ?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
If you are flasjing back to stock you should flash back to the same baseband/bootloader that came stock on your phone.
I'm looking for a stock rooted zip for the sasktel i747m (MF1) that i can flash in CWM....I need to go back to stock to fix a data issue that ive encountered through flashing these new d2lte builds...
Does anyone know if a cwm flashable stock rooted rom exists for Sasktel's i747m with baseband MF1 ???I already have the Odin flashable stock rooted zip but don't have a laptop handy until tuesday....And im pretty sure i cant flash that zip in cwm recovery....
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Ariesdroid said:
If you are flasjing back to stock you should flash back to the same baseband/bootloader that came stock on your phone.
I'm looking for a stock rooted zip for the sasktel i747m (MF1) that i can flash in CWM....I need to go back to stock to fix a data issue that ive encountered through flashing these new d2lte builds...
Does anyone know if a cwm flashable stock rooted rom exists for Sasktel's i747m with baseband MF1 ???I already have the Odin flashable stock rooted zip but don't have a laptop handy until tuesday....And im pretty sure i cant flash that zip in cwm recovery....
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have not seen a stock mf1 ROM that can be flashed in CWM. You could use mobile Odin to flash back to stock and then flash Philz Touch via desktop Odin later.
OK, so back to my question.. If I have the i747M and bought the phone with ICS.. does this help.?
audit13 said:
You mentioned your have the i747 and Rogers. Do you have the AT&T s3 (i747) or Rogers/Bell/Telus s3 (i747m)?
What is the most recent stock ROM you had on your phone?
Click to expand...
Click to collapse
Hey there Audit, Sorry to bother you again, I just dont know how to move forward from here and neeeeeed some help.
I have been reading for days and days have not found a straight answer for my issue and I dont want to just go ahead and start flashing when I dont know if its the right method ?
I dont know how to get back to stock from where I'm at, I dont know how to figure out what bootloader I have (you asked me)
I have found a couple links on XDA that I can follow, I'm just not sure if they apply to my situation ?
This is a pretty detailed response/tutorial, but I dont know if I can just go ahead with this or not ?
http://forum.xda-developers.com/showthread.php?t=2186967
This is also very detailed: http://forum.xda-developers.com/showthread.php?t=1739426
Any help would be greatly appreciated !
robberrobbie said:
OK, so back to my question.. If I have the i747M and bought the phone with ICS.. does this help.?
Click to expand...
Click to collapse
If you are sure you have the Rogers i747m and you have never loaded a stock Rogers 4.3 ROM onto your phone, you could use desktop Odin to flash a pre-rooted 4.1.2 ROM from here: http://forum.xda-developers.com/showthread.php?t=1739426.
Flashing the pre-rooted 4.1.2 ROM will return the phone to completely stock, wipe out all installed apps and data, and you will have root. I do not recommend flashing the Rogers 4.3 pre-rooted ROM from the link.
Once you are able to boot into the phone and set things up, you can flash Philz Touch from Odin which will give you a custom recovery on a rooted stock 4.1.2 ROM.
Hey guys, I've been searching for a couple hours now and have came up empty handed.
I'm trying to find a stock rooted ROM for my Sasktel i747m (baseband/bootloader= MF1] . I already have the Odin-able version but i don't have access to a computer for a few days so i am looking for a flashable zip that i can flash in cwm recovery? I know these type of zips exist for the us carriers....but has anyone made one for the Canadian versions???
any help or links would be great..
AGAIN, I'M LOOKING FOR A FLASHABLE STOCK ROOTED ZIP FOR sasktel I747M (BASEBAND MF1) THAT I CAN FLASH IN CWM 6.0.4.7 RECOVERY...NOT ODIN.
Thanks!
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Not sure if mobile Odin will help: http://forum.xda-developers.com/showthread.php?t=1347899
Pre-rooted ROMs: http://forum.xda-developers.com/showthread.php?t=1739426
did you ever solve this issue? I was wondering the same thing, wanting to flash back to rogers 4.1.1/2 and them back to Quantum to fix the minor LTE issue. I was considering mobile ODIN.
jmah10 said:
did you ever solve this issue? I was wondering the same thing, wanting to flash back to rogers 4.1.1/2 and them back to Quantum to fix the minor LTE issue. I was considering mobile ODIN.
Click to expand...
Click to collapse
Do you have the i747m? If you do, you can try flashing a stock ROM from sammobile. Not sure if you can use Odin with a 4.3 bootloader.
audit13 said:
Do you have the i747m? If you do, you can try flashing a stock ROM from sammobile. Not sure if you can use Odin with a 4.3 bootloader.
Click to expand...
Click to collapse
yep, i'm on the i747m with the LK4 bootloader, so I think that's 4.1.1? Ideally, I was hoping to just use CWM to flash everything - stock rom, then back to quantum, but I hadn't found a flashable version of stock rom for CWM yet. I will check out sammobile, though, thanks.
I never did find a zip...I ended up odining back and then making sure i made a stock rooted nandroid before going back to aosp...