[Q] Downgrade from 4.2.2 back to 4.1.2 - Galaxy Grand Duos i9082 Q&A, Help & Troubleshootin

I wonder is this possible or will it brick my phone? Currently I am experiment it with Stock 4.2.2 XME ROM. Is it possible to downgrade it back to 4.1.2? Thanks in advance.

soralz said:
I wonder is this possible or will it brick my phone? Currently I am experiment it with Stock 4.2.2 XME ROM. Is it possible to downgrade it back to 4.1.2? Thanks in advance.
Click to expand...
Click to collapse
Yes...
sent from my GT-I9082

of course possible..just download 4.1.2 firware and flash with odin..:good:

boudhayan said:
of course possible..just download 4.1.2 firware and flash with odin..:good:
Click to expand...
Click to collapse
Thanks, I've reverted back to 4.1.2.

sorry guys.. where i can find 4.1.2 xme version

I am unable to revert back to 4.1.2
soralz said:
Thanks, I've reverted back to 4.1.2.
Click to expand...
Click to collapse
Hello,
Thank you in advance who ever reply to this.
Problem is i updated my device to 4.2.2 recently with odin. Before doing that I made a (nand) backup of my 4.1.2 stock rom.
As most people having problems with 4.2.2. my phones heats up and battery draining quickly 3 hours and its 10% which is very bad.
When I try to restore 4.1.2 nand , My phone gets stuck on "Samgung Galaxy grand i9082" logo and nothing happens. I restored 4.2.2 backup and its working fine.
I assume its kernal problem. Can i restore kernal to 4.1.2 with odin? I do have stock firmware downloaded already.
Thank you!

hi_blues said:
Hello,
Thank you in advance who ever reply to this.
Problem is i updated my device to 4.2.2 recently with odin. Before doing that I made a (nand) backup of my 4.1.2 stock rom.
As most people having problems with 4.2.2. my phones heats up and battery draining quickly 3 hours and its 10% which is very bad.
When I try to restore 4.1.2 nand , My phone gets stuck on "Samgung Galaxy grand i9082" logo and nothing happens. I restored 4.2.2 backup and its working fine.
I assume its kernal problem. Can i restore kernal to 4.1.2 with odin? I do have stock firmware downloaded already.
Thank you!
Click to expand...
Click to collapse
Nope, 4.1.2 and 4.2.2 kernel arent't compatible.

Means i am stuck with 4.2.2 forever
soralz said:
Nope, 4.1.2 and 4.2.2 kernel arent't compatible.
Click to expand...
Click to collapse
Thank you for your reply.
It means that there is no way to go back to 4.1.2
I was thinking if i could:
1. Flash 4.1.2 stock firmware which will return me 4.1.2 stock kernal. (with odin).:fingers-crossed:
2. Once i am on 4.1.2 kernal i restore my nand and get back to my stock rooted rom.
Any ideas?
EDIT:
I tried it and end up in boot loop. I have no idea of which firmware my phone had. because i purchased it online and was shipped from Hong Kong. Manufactured in veitnam . I tried Veitnam firmware , Malaysian and now i will try india, pakistan, KSA respectively. This thread is not that active.
Anyone whos reading if you have any suggestions please try to help me.
Thank you

hi_blues said:
Thank you for your reply.
It means that there is no way to go back to 4.1.2
I was thinking if i could:
1. Flash 4.1.2 stock firmware which will return me 4.1.2 stock kernal. (with odin).:fingers-crossed:
2. Once i am on 4.1.2 kernal i restore my nand and get back to my stock rooted rom.
Any ideas?
EDIT:
I tried it and end up in boot loop. I have no idea of which firmware my phone had. because i purchased it online and was shipped from Hong Kong. Manufactured in veitnam . I tried Veitnam firmware , Malaysian and now i will try india, pakistan, KSA respectively. This thread is not that active.
Anyone whos reading if you have any suggestions please try to help me.
Thank you
Click to expand...
Click to collapse
Try to follow me
After flash your stock rom:
Reboot phone in Recovery Mode (press and hold Volume Down buttons + Home + Power)
wipe cache partition and wipe data/factory reset
reboot>>>>
Have fun

Related

[Q] lost backup 4.1

Hi guys, For some reason I lost my 4.1 back up. I'm on 4.3 and custom recovery. Can I just flash the stock 4.1.2 back to go back to 4.1.2 or am I stuck with 4.3? Thanks :crying:
xuanphucn said:
Hi guys, For some reason I lost my 4.1 back up. I'm on 4.3 and custom recovery. Can I just flash the stock 4.1.2 back to go back to 4.1.2 or am I stuck with 4.3? Thanks :crying:
Click to expand...
Click to collapse
People have been flashing back to 4.1.2 without problems.
Sent from my phone
210euser said:
People have been flashing back to 4.1.2 without problems.
Sent from my phone
Click to expand...
Click to collapse
Are you sure? Cause I thought you were supposed to make a backup of 4.1 before flashing 4.3?
xuanphucn said:
Are you sure? Cause I thought you were supposed to make a backup of 4.1 before flashing 4.3?
Click to expand...
Click to collapse
That's so you don't lose your setup.
Read around and you'll see MANY people have restored back to 4.1.2
In fact it's in the thread you got the leak from. ...
--》Sent from my mind to your screen
mindmajick said:
That's so you don't lose your setup.
Read around and you'll see MANY people have restored back to 4.1.2
In fact it's in the thread you got the leak from. ...
--》Sent from my mind to your screen
Click to expand...
Click to collapse
I was on UCAMH3. I couldn't find the stock rom of that version. Is that ok if I downgrade my phone to ALJ2?
I can also confirm I have restored back to 4.1.2 from 4.3 and make backups without issues
Hope good recovery
xuanphucn said:
Hi guys, For some reason I lost my 4.1 back up. I'm on 4.3 and custom recovery. Can I just flash the stock 4.1.2 back to go back to 4.1.2 or am I stuck with 4.3? Thanks :crying:
Click to expand...
Click to collapse
I plan to flash custom rom due to Note 3 features.
I am worried about backup and restore issue.
I hope that you can solve the problem.

[Q] cant flash 4.4.2 rom

I attempted to flash a 4.4.2 rom yesterday but it couldnt and it gave me a status 7 error. I looked it up and people said that you have to update clockworkmod. Well i tried to through terminal but it couldn't. It said something like could not find directory. So if anyone has any idea what I can do pleast tell me.
Using Galaxy s3 sgh-i747 on PA 3.99.1 ROM
Flash Philz Touch from here via Odin (use the tar version in PDA): http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
alright i did it through odin and it worked..now im gonna make a backup again and try flashing a rom. hope it works. thanks for the help
If you can't flash a KK ROM, you may need to update your bootloader. If you're not on a 4.3 bootloader, try and avoid it for now.
audit13 said:
If you can't flash a KK ROM, you may need to update your bootloader. If you're not on a 4.3 bootloader, try and avoid it for now.
Click to expand...
Click to collapse
im on a 4.3 rom but if i get error status 7 again ill just restore my backup and avoid it...is there a 4.3 bootloader? Also i was about to wipe it but its asking me wipe data/factory reset or clean to install a new ROM. I suggest its the 2nd one but if i do it and it doesnt work can i still restore my backup?
orlans21 said:
im on a 4.3 rom but if i get error status 7 again ill just restore my backup and avoid it...is there a 4.3 bootloader? Also i was about to wipe it but its asking me wipe data/factory reset or clean to install a new ROM. I suggest its the 2nd one but if i do it and it doesnt work can i still restore my backup?
Click to expand...
Click to collapse
There is a 4.3 bootloader that would be installed if you ran an OTA update to 4.3 or you manually installed the 4.3 bootloader.
Did you make your backup using Philz? If not, make the backup using Philz, then wipe and install.
audit13 said:
There is a 4.3 bootloader that would be installed if you ran an OTA update to 4.3 or you manually installed the 4.3 bootloader.
Did you make your backup using Philz? If not, make the backup using Philz, then wipe and install.
Click to expand...
Click to collapse
I just made a backup on Philz and im not sure if i installed a 4.3 bootloader manually or OTA. Just to be clear im wiping to install ROM. so the 2nd option
orlans21 said:
I just made a backup on Philz and im not sure if i installed a 4.3 bootloader manually or OTA
Click to expand...
Click to collapse
Doesn't really matter but it's good to know that you need to stay away from any attempts to downgrade the bootloader.
hahah why would i want to downgrade?
orlans21 said:
hahah why would i want to downgrade?
Click to expand...
Click to collapse
I have seen posts where people bricked their phone when trying to return to a stock ROM using Odin.
well...im gonna have to put it back to a stock rom when i get a new phone and give this to my dad...i still have the 4.1 stock downloaded on my computer...i dont even remember how to put it back now lol. so i should try flashing a 4.4.2 rom? which rom do you prefer? i have carbon and liquidsmooth. i want halo like i do on PA and both have it i believe
orlans21 said:
well...im gonna have to put it back to a stock rom when i get a new phone and give this to my dad...i still have the 4.1 stock downloaded on my computer...i dont even remember how to put it back now lol
Click to expand...
Click to collapse
You can't restore to a completely stock ROM not that you have a 4.3 bootloader. AT&T never released a full 4.3 stock ROM, only an update to 4.3 from an earlier stock ROM.
If you did not have a 4.3 bootloader, you could install any stock AT&T ROM such as 4.1.1. Being able to restore to stock 4.1.1 would also allow you to sim unlock your phone for free, if necessary.
audit13 said:
You can't restore to a completely stock ROM not that you have a 4.3 bootloader. AT&T never released a full 4.3 stock ROM, only an update to 4.3 from an earlier stock ROM.
Click to expand...
Click to collapse
well im on rogers and its the same as att. i still have the original samsung touchwiz 4.1 rom just incase anything happens.
Your original post said you have an sgh-i747 which is an AT&T model. If you have a Rogers s3, it's an sgh-i747m.
Regardless of which model you have, you can't downgrade from any 4.3 bootloader which means you can't completely revert back to 4.1.1. The best you could do would be to run 4.1.1 on a 4.3 bootloader.
audit13 said:
Your original post said you have an sgh-i747 which is an AT&T model. If you have a Rogers s3, it's an sgh-i747m.
Regardless of which model you have, you can't downgrade from any 4.3 bootloader which means you can't completely revert back to 4.1.1. The best you could do would be to run 4.1.1 on a 4.3 bootloader.
Click to expand...
Click to collapse
sorry i should have included the m lol. i wont worry about going back to 4.1 until the galaxy s5 comes out and im ready to give it to my dad. but back to focusing on this. im about to attempt to flash a 4.4.2 rom. either liquidsmooth or carbon. what do you like?
I prefer Validus version 4.3 because it includes Nova Launcher and it has a dark UI theme.
but thats 4.3. i wanna be on 4.4 and im installing nova and making it the way i had it before.
wait a second is it a 4.4 rom?
orlans21 said:
but thats 4.3. i wanna be on 4.4 and im installing nova and making it the way i had it before.
wait a second is it a 4.4 rom?
Click to expand...
Click to collapse
It is a 4.4.2-based rom. The release is version 4.3.
hmm interesting...you do recommend it? what great features does it come with?
I like it because it's a very stripped-down ROM, has a dark UI, and is AOSP-based.
It's not radically different from other ROMs but has exactly what I want. I run the same ROM on a Nexus 4 and Motorola Atrix HD.

[Q] Note 2 bricked

Today i flashed CM 11 with CWM and after rebooting the baseband and IMEI were gone. I tried to flash the baseband but nothing happened. I then tried to flash the stock rom touchwiz through ODIN and it failed. Now the phone reboots asking to connect to KIES and do a recovery which i can't perform.
Any clues about?
Thank you in advance,
Davide
you have back up of your phone..?
can you boot into recovery..?
which stock rom you tried to flash , 4.3..? 4.4
http://forum.xda-developers.com/showthread.php?t=2758855 See this might help you
caravaggio971 said:
Today i flashed CM 11 with CWM and after rebooting the baseband and IMEI were gone. I tried to flash the baseband but nothing happened. I then tried to flash the stock rom touchwiz through ODIN and it failed. Now the phone reboots asking to connect to KIES and do a recovery which i can't perform.
Any clues about?
Thank you in advance,
Davide
Click to expand...
Click to collapse
tnt4ever said:
you have back up of your phone..?
can you boot into recovery..?
which stock rom you tried to flash , 4.3..? 4.4
http://forum.xda-developers.com/showthread.php?t=2758855 See this might help you
Click to expand...
Click to collapse
Thanks for the prompt reply. The Rom I flashed is the 4.4.2 snapshot.
In the meantime i flashed this pit file from this link
http://forum.xda-developers.com/showthread.php?t=2137008
and now the CYM is back and working but still no baseband.
Is there any way i can reinstall the stock rom ? is the partition a problem?
I dont have a backup of the EFS folder (I made it once but i cant find it)
EDIT: CWM is installed and working
is your IMEI Same..?
i assume there are several reasons, it can be a simple fix by installing a stock 4.4 KK which will eliminate the problem you are facing, iin past week, i done alot of experiences on my bricked note 2, specially the failed PIT flashed, i tried couple of them but at the end the only thing turned the phone in right direction was stock KITKAT
you can find that in the the post i posted earlier.
i am 100% sure you will get your phone back to life.
also remember to when you are done flashing go to stock recovery and wipe data and cache. It is needed after re-partiton to form the partitions correctly
edit: best keep a nand of your current rom as well
4.4.2
https://mega.co.nz/#!2QRmCbyb!YkWs927BfvYxqL-vJiQHXkshqG3UtqHm4XIDbgLsEK0
best of luck
caravaggio971 said:
Thanks for the prompt reply. The Rom I flashed is the 4.4.2 snapshot.
In the meantime i flashed this pit file from this link
http://forum.xda-developers.com/showthread.php?t=2137008
and now the CYM is back and working but still no baseband.
Is there any way i can reinstall the stock rom ? is the partition a problem?
I dont have a backup of the EFS folder (I made it once but i cant find it)
EDIT: CWM is installed and working
Click to expand...
Click to collapse
tnt4ever said:
is your IMEI Same..?
i assume there are several reasons, it can be a simple fix by installing a stock 4.4 KK which will eliminate the problem you are facing, iin past week, i done alot of experiences on my bricked note 2, specially the failed PIT flashed, i tried couple of them but at the end the only thing turned the phone in right direction was stock KITKAT
you can find that in the the post i posted earlier.
i am 100% sure you will get your phone back to life.
also remember to when you are done flashing go to stock recovery and wipe data and cache. It is needed after re-partiton to form the partitions correctly
edit: best keep a nand of your current rom as well
4.4.2
https://mega.co.nz/#!2QRmCbyb!YkWs927BfvYxqL-vJiQHXkshqG3UtqHm4XIDbgLsEK0
best of luck
Click to expand...
Click to collapse
Exactly. Flashing the official stock rom based on kitkat 4.4.2 (which has been released few days ago I believe) solved the problem. I'll try to flash CM tomorrow (tonight get.cm is not reachable and can't download the android app).
Thank you!
Hello
very happy to see your problem is fixed
enjoy your galaxy note 2
this community is very helpful for every one my friend
caravaggio971 said:
Exactly. Flashing the official stock rom based on kitkat 4.4.2 (which has been released few days ago I believe) solved the problem. I'll try to flash CM tomorrow (tonight get.cm is not reachable and can't download the android app).
Thank you!
Click to expand...
Click to collapse
Just wanted to ask you something. I installed the Nordic version of the latest Android update which is at the moment the only one available and I have the impression that the voice quality is not that good. I was wondering if this may depend on the baseband version installed on this one. I'm from Italy and kitkat 4.4 is still not available in my country. Flashing a different baseband may change the situation? If so, Is there a baseband more compatible with this touchwiz version and the Italian telco providers?
Thank you again,
Davide
Sent from my GT-N7105 using XDA Free mobile app

[Q] Boot loop.

Hi guys, i have a very strange problem with my Note 2 when trying to upgrade from Hurricane 4.3 to Phantom 4.4.2. or Dr Ketan Custom ROMV8 4.4.2.
No matter if i use TWRP latest or Phils latest recovery it just stop at Samsung logo.
I have tried with both Mj5 and Nd3 bootloader, both compatible with 4.4.2 and i do all the wiping needed before i flash.
Md5 is checked on all files.
I have tried this atleast 10 times but always ending up with nandroid back to Hurricane.
nobad said:
Hi guys, i have a very strange problem with my Note 2 when trying to upgrade from Hurricane 4.3 to Phantom 4.4.2. or Dr Ketan Custom ROMV8 4.4.2.
No matter if i use TWRP latest or Phils latest recovery it just stop at Samsung logo.
I have tried with both Mj5 and Nd3 bootloader, both compatible with 4.4.2 and i do all the wiping needed before i flash.
Md5 is checked on all files.
I have tried this atleast 10 times but always ending up with nandroid back to Hurricane.
Click to expand...
Click to collapse
In that case flash 4.4.2 stock rom , root it and then flash custom rom.
Sent from my GT-N7100 using Tapatalk
Just to be precise: Flash stock rom 4.4.2 as suggested and afterwards a custom recovery, both using Odin, no need to root. Then you can flash any rom you like :good:
Androidwizzard said:
Just to be precise: Flash stock rom 4.4.2 as suggested and afterwards a custom recovery, both using Odin, no need to root. Then you can flash any rom you like :good:
Click to expand...
Click to collapse
Thank you for your answer, can i flash any 4.4.2 ROM since no NEE (nordic countrys) out yet, France or Gremany per exemple?
nobad said:
Thank you for your answer, can i flash any 4.4.2 ROM since no NEE (nordic countrys) out yet, France or Gremany per exemple?
Click to expand...
Click to collapse
Yes you can.Only the modem version might be different so you might have to change that if you you experience slow data speeds and weak signal.But France has ND3 modem which i am using in India and no issues with network or data speeds so you should be okay too.
singhpratik87 said:
Yes you can.Only the modem version might be different so you might have to change that if you you experience slow data speeds and weak signal.But France has ND3 modem which i am using in India and no issues with network or data speeds so you should be okay too.
Click to expand...
Click to collapse
It did work, dont know why but now i could install any 4.4.2 ROMs :laugh:
U guys did a great job helping me out here, i really appreciate it, many thanks :good:

Error Downgrading back to 4.2.2

I need to downgrade from 4.4 to 4.2 stock because I'm experimenting with Samsung's DriveLink app, which does not work on Cyanogenmod 10.1, 10.2, 11.0 or 12.1. It's reported to work on stock 4.2 but not on 4.4.
I don't know for sure what OS came with my phone, but I believe it's 4.2. I made a backup of this right before I flashed Cyanogenmod the first time, but I can't get it to work through Odin. I get SW REV CHECK FAIL: FUSED 2 > BINARY 1
A downgrade must be possible. I went from Cyanogenmod 12.1 to 10.1 and successfully re-flashed the stock 4.4. Just 4.2 doesn't work. How do I do this?
Here's the rom I was trying to flash: oh, I guess no links.
Teracotta said:
I need to downgrade from 4.4 to 4.2 stock because I'm experimenting with Samsung's DriveLink app, which does not work on Cyanogenmod 10.1, 10.2, 11.0 or 12.1. It's reported to work on stock 4.2 but not on 4.4.
I don't know for sure what OS came with my phone, but I believe it's 4.2. I made a backup of this right before I flashed Cyanogenmod the first time, but I can't get it to work through Odin. I get SW REV CHECK FAIL: FUSED 2 > BINARY 1
A downgrade must be possible. I went from Cyanogenmod 12.1 to 10.1 and successfully re-flashed the stock 4.4. Just 4.2 doesn't work. How do I do this?
Here's the rom I was trying to flash: oh, I guess no links.
Click to expand...
Click to collapse
This is probably due to the bootloader version. The only firmware 4.2.2 that will work with the latest bootloader is the latest Brazil 4.2.2. Are you using the model i9195 LTE model?
RuffBuster said:
This is probably due to the bootloader version. The only firmware 4.2.2 that will work with the latest bootloader is the latest Brazil 4.2.2. Are you using the model i9195 LTE model?
Click to expand...
Click to collapse
Yes I am. So any version of the Brazil stock Samsung will work with 4.4 bootloader? Is it possible to flash an older bootloader?
Teracotta said:
Yes I am. So any version of the Brazil stock Samsung will work with 4.4 bootloader? Is it possible to flash an older bootloader?
Click to expand...
Click to collapse
No only the firmware described here will work http://www.s4miniarchive.com/2014/...y-s4-mini-from-kitkat-to-jelly-bean.html?m=1 . Maybe you can change the boot loader? I don't know. But that Brazil rom worked for me. But I'm back with kit kat as I didn't like jb.
RuffBuster said:
No only the firmware described here will work http://www.s4miniarchive.com/2014/...y-s4-mini-from-kitkat-to-jelly-bean.html?m=1 . Maybe you can change the boot loader? I don't know. But that Brazil rom worked for me. But I'm back with kit kat as I didn't like jb.
Click to expand...
Click to collapse
Teracotta said:
Yes I am. So any version of the Brazil stock Samsung will work with 4.4 bootloader? Is it possible to flash an older bootloader?
Click to expand...
Click to collapse
That brazil firmware has latest knox bootloader. The same one found with kitkat roms. So you can only flash that jellybean firmware.
You cannot flash old bootloader as you will get the error you mentioned earlier. Samsung used some protocol that prevents writing older
version onto knox. Thats how it is.
I flashed the I9195UBUBNE2 but I can't get passed the boot animation. It's possible my phone shipped with Kitkat. Any ideas?
Teracotta said:
I flashed the I9195UBUBNE2 but I can't get passed the boot animation. It's possible my phone shipped with Kitkat. Any ideas?
Click to expand...
Click to collapse
Did you try factory reset ? Remove and reinsert battery. Enter recovery mode using 3 button combo, it should be stock samsung recovery.
Choose factory reset/wipe data options. Once it is done choose reboot. It should boot up just fine.
Teracotta said:
I flashed the I9195UBUBNE2 but I can't get passed the boot animation. It's possible my phone shipped with Kitkat. Any ideas?
Click to expand...
Click to collapse
Did this to me. Pulling the battery and wiping data/cache worked for me and it booted.
That was probably the case. I cleared the cache, reset the data, and re-flashed the ROM and it works beautifully. Great find with the Brazilian ROM, thanks!

Categories

Resources