My archos 80 g9 charging port broke like 2 or 3 weeks ago and iv been trying to fit it without success . so i was thinking i could replace the mother board,so if any one has an old or broke g9 they no longer need or want pleas reply. i would be so grateful :angel: . i would replace it but i have a lot of data on it
thank you
frank989 said:
My archos 80 g9 charging port broke like 2 or 3 weeks ago and iv been trying to fit it without success . so i was thinking i could replace the mother board,so if any one has an old or broke g9 they no longer need or want pleas reply. i would be so grateful :angel: . i would replace it but i have a lot of data on it
thank you
Click to expand...
Click to collapse
I have an solution, works like a dream, later I will attach a photos how to fix it solution
chees
thank you rioni
rioni said:
I have an solution, works like a dream, later I will attach a photos how to fix it solution
chees
Click to expand...
Click to collapse
thank you rioni:good: i'll be waiting for the photos!:victory:
hey finaly I have a photos , all you need is a usb cable to cut and to put on your old micro usb port, 2 months with no single problem. charging and connecting to PC.:laugh::laugh:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rioni said:
hey finaly I have a photos , all you need is a usb cable to cut and to put on your old micro usb port, 2 months with no single problem. charging and connecting to PC.:laugh::laugh:View attachment 1260287
View attachment 1260288
View attachment 1260291
View attachment 1260294
Click to expand...
Click to collapse
more pic.
thank you so much
rioni said:
more pic.
Click to expand...
Click to collapse
thank you so much!!!!
and what goes where and what do i need to make the wires stay put?
frank989 said:
thank you so much!!!!
and what goes where and what do i need to make the wires stay put?
Click to expand...
Click to collapse
Hey all what you need is normal usb cable male female, cut the cable open your device look at your micro usb port you need to iron 4 wires to micro usb port and that's it, charger also need to cut to replace port or you can buy a new one or to remake the same one .
how
rioni said:
Hey all what you need is normal usb cable male female, cut the cable open your device look at your micro usb port you need to iron 4 wires to micro usb port and that's it, charger also need to cut to replace port or you can buy a new one or to remake the same one .
Click to expand...
Click to collapse
how do u iron the 4 wires down and where does each wire go?
What do you mean, how do you iron the wires? You solder them to the board with a soldering iron...
Sent from my GT-I9001 using Tapatalk 2
frank989 said:
how do u iron the 4 wires down and where does each wire go?
Click to expand...
Click to collapse
You need an power instrument to insure red and black wich side is i think it was red green white and black
it worked sort of
frank989 said:
how do u iron the 4 wires down and where does each wire go?
Click to expand...
Click to collapse
i did it and it worked but the green light turned of for like 1 second and i kept repositioning it and it did the same thing because i dont know where what goes its very hard to keep it still can u please help me...?
Hey you need to work cearful easy when you iron the wires plus and minus your device need to startups itself then try the green one and white after that use silicon and I think your done
Sent from my ARCHOS 101G9 using xda app-developers app
rioni said:
Hey you need to work cearful easy when you iron the wires plus and minus your device need to startups itself then try the green one and white after that use silicon and I think your done
Sent from my ARCHOS 101G9 using xda app-developers app
Click to expand...
Click to collapse
do i need to connect any of the wires together?
No no no don't try you gonna damage the device
Sent from my ARCHOS 101G9 using xda app-developers app
second solution, find an adapter 5v 1500ma connect wires directly to motherboard red to red , black to black leave It 12 hour until charged 50%-60% then try the old method.
heers
!!WARNING!!
Hey guys!
rioni said:
second solution, find an adapter 5v 1500ma connect wires directly to motherboard red to red , black to black leave It 12 hour until charged 50%-60% then try the old method.
Click to expand...
Click to collapse
Just a word of caution at this point:
If you speak about the red and black cables connected to the LiPo battery, then i really would advice you not to do so.
As you might know there'd been some evil accidents with exploding LiPo cells. So please be careful giving such advice!!
If you directly connect a 5V wall charger or similar to the battery connector this is very dangerous!!!
With a simple 5V adaptor there's neither current limitation, nor temperature sensing for the LiPo battery.
The cells might explode due to overheating!!!
Please don't try this method and use the connections at the MicroUSB instead.
P.S.: You may describe where plus and minus are located at the connector.
I guess this is what frank989 asked for...
Regards,
scholbert
Hey yes but I also charged battery directly to plus minus it work for me with no problem than then after charged the battery I connectet wires to micro USB port so its safe no problem
Sent from my ARCHOS 101G9 using xda app-developers app
direct
rioni said:
You need an power instrument to insure red and black wich side is i think it was red green white and black
Click to expand...
Click to collapse
heey rioni
i think you misunderstood me when i was asking about connecting wires, i meant connecting the wires in the usb cable?,
and would it charge if i connected the usb cable wires directly to the red and black + & - wires connected directly to the 2 batteries?
frank989 said:
heey rioni
i think you misunderstood me when i was asking about connecting wires, i meant connecting the wires in the usb cable?,
and would it charge if i connected the usb cable wires directly to the red and black + & - wires connected directly to the 2 batteries?
Click to expand...
Click to collapse
No just connect black to black red to red but be sure the adapter to be 5v minimun 700Ma or max 1500 ma.
---------- Post added at 07:51 PM ---------- Previous post was at 07:03 PM ----------
rioni said:
No just connect black to black red to red but be sure the adapter to be 5v minimun 700Ma or max 1500 ma.
Click to expand...
Click to collapse
After chargin battery this is the scheme for micro usb port Try to iron wires carfely
1 VCC +5 V
2 D- uart3_tx -> adaptor 1.8V_rx
3 D+ uart3_rx <- adaptor 1.8V_tx
4 GND signal ground -> adaptor gnd
should i just send it to archos repair center?
rioni said:
No just connect black to black red to red but be sure the adapter to be 5v minimun 700Ma or max 1500 ma.
---------- Post added at 07:51 PM ---------- Previous post was at 07:03 PM ----------
After chargin battery this is the scheme for micro usb port Try to iron wires carfely
1 VCC +5 V
2 D- uart3_tx -> adaptor 1.8V_rx
3 D+ uart3_rx <- adaptor 1.8V_tx
4 GND signal ground -> adaptor gnd
Click to expand...
Click to collapse
should i just send it to there repair because they will just replace it for me??
Related
So far I have learned how to make a USB host cable and a universal charging cable. I have shared this in a few post but I figured it would be good to have them all in one place with a diagram.
I will update this drawing as I learn how to build the other cables.
Thanks goes out to pokey9000 for sharing how to do the USB host and nudging me the right way for figuring out the charging!
Update:
I guess the titles of each is not enough to properly relay what each does so here is a quick description of each.
1. USB Host - Puts the Tab into host mode so that you can use items like thumb drives and keyboards. If you want to use a USB powered hard drive, you will need to use a powered hub.
2. USB Host w/ Power - Puts the Tab into host mode but also allows you to charge the unit at the same time.
3. Universal Charging - For making a 30-pin cable that will let you charge your Tab off any 5V source so that you don't get the red X over the battery. When doing this, data transfers will not work.
4. Universal Charging Inline cable - For if you don't want to buy a 30pin connector or cut up your OEM cable, you can put this in line with your OEM cable and use any 5V source.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
ericlmccormick said:
So far I have learned how to make a USB host cable and a universal charging cable. I have shared this in a few post but I figured it would be good to have them all in one place with a diagram.
I will update this drawing as I learn how to build the other cables.
Thanks goes out to pokey9000 for sharing how to do the USB host and nudging me the right way for figuring out the charging!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Image link is broken, and I'm crazy interested in this. Can't wait to see it when its up. Good Job man
It is my first time linking a picture which you can't just upload, you need to link to an existing online photo.
I think I fixed the problem use ImageShack but if you still have issues viewing, use the below link
GT Cable layouts
ericlmccormick said:
It is my first time linking a picture which you can't just upload, you need to link to an existing online photo.
Try going here. Hopefully this works for you.
GT Cable layouts
Click to expand...
Click to collapse
Worked perfectly, thanks. This stuff is so interesting, I can't wait to get home and play
do you have a picture of a real example of the USB host w/power
dwa012 said:
do you have a picture of a real example of the USB host w/power
Click to expand...
Click to collapse
Not yet. I haven't built the USB host cable myself as my connectors are in the mail. I built that diagram from a mixture of what pokey9000 discovered plus what the pin outs are for the OEM cable.
Hopefully by the end of the week I will get the connector and will build this into a project enclosure which will also have a switch to change this between charge only, USB slave and USB host.
Cool. Seems like it would be easier to just grab a few of these cables, cut the cable and connect rather than soldering to the naked connectors from Kineteka.
thatdude90210 said:
Cool. Seems like it would be easier to just grab a few of these cables, cut the cable and connect rather than soldering to the naked connectors from Kineteka.
Click to expand...
Click to collapse
Mostly likely, like the OEM cable, the connector is not fully populated. You would be able to easily make a charge only cable the will charge off anything, but to do other things like USB hosting, you need another pin, or rearrange the pins that are there which are probably a pain to do too.
Ah, true. Most likely lot of those pins don't have wires connected.
This is good stuff. I am looking forward to learning more. Thanks you for doing this.
I had a brain fart.
I know what the usb host w/ power cable would look like. I have parts orderd for the host mode configuration. I hopefully await a hdmi/usb-host cable.
First off, thanks for this awesome discovery !
But I've still got some questions..
what is the difference between the usb host and the usb host w. charging?
And what should the universal charger do?
Thanks!
snaai8 said:
First off, thanks for this awesome discovery !
But I've still got some questions..
what is the difference between the usb host and the usb host w. charging?
And what should the universal charger do?
Thanks!
Click to expand...
Click to collapse
The USB host should be pretty much the same as the OEM dongle. The host with power should allow you to charge the unit when also attached to a power supply. I have not tested this but I expect should work without a problem. The reason people might just opt to not have the power is to make a smaller package.
The universal charge cable puts the unit into charge mode no matter what your 5VDC power source is. Without this, you must use the OEM charger (or aftermarket adapter) else get a red X over the battery.
Anyone know if it would be possible to hack a USB port into the multimedia-dock? It has the 30pin male and female.. probably passthru.. I've yet to take it apart (I suspect there are screws on the bottom). Anyhow I figure the dock should work with the USB adapter, so maybe all the wires are there inside the base. Then it would just be a matter of adding a female USB (with appropriate resistor). And possibly this would allow charging, audio, etc WITH USB attached. Best part is that multimedia docks are available at local bestbuy, etc.
alternatively, i'm considering a keyboard <sigh>.. but only if usb host mode works with it.
-jeff
jeffcrilly said:
Anyone know if it would be possible to hack a USB port into the multimedia-dock? It has the 30pin male and female.. probably passthru.. I've yet to take it apart (I suspect there are screws on the bottom). Anyhow I figure the dock should work with the USB adapter, so maybe all the wires are there inside the base. Then it would just be a matter of adding a female USB (with appropriate resistor). And possibly this would allow charging, audio, etc WITH USB attached. Best part is that multimedia docks are available at local bestbuy, etc.
alternatively, i'm considering a keyboard <sigh>.. but only if usb host mode works with it.
-jeff
Click to expand...
Click to collapse
I have the dock and like this idea...I will check out it's assembly in a bit and reply back.
UPDATE: YUP (4) philips screws under the pad on the bottom. Will try to get a pic posted.[/QUOTE]
guts attached...
Great! I am looking forward to seeing just how you do this.
I want know how one would do the hdmi cable, will that be hard to reverse engineer?
This dock is suppose to allow either the HDMI or the USB connector to plug in the back so that means it does pass all this through. This is going to be interesting....
okay a few questions again..
Would it be hard to make a usb keyboard work on the tab (like cutting up the usb cable and replacing it with a 30pin dock connector?)?
And how much effort would it take to create a hdmi out? or a normal video out if possible..? Because I actually need an old video out port but on the samsung site is says that the video out represented is not compatible with the 10.1..
and where do you solder everything on? I've yet to find a picture of the 30pin connector which tells you where to solder..
Where would I solder in this image? http://shop.kineteka.com/images/thumbs/0000564.jpeg
Or should I just get a tab-out like this:
http://shop.kineteka.com/products/200-samsung-tabbreakout.aspx
Has anyone been able to find a USB-OTG adapter for the Galaxy Nexus similar to the USB adapter for the Galaxy Tab (pictured below), i.e. one that's just a compact adapter without a cable between the two sides?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Check amazon... they have otg cables on there without the cable. Its kinda bulky though.
Sent from my Galaxy Nexus using xda premium
Can't that OTG for the Tab work?
Shamrock13 said:
Can't that OTG for the Tab work?
Click to expand...
Click to collapse
No! The galaxy tab does not use micro USB, it has a proprietary cable system somewhat like apple ipod
Sent from my Galaxy Nexus using xda premium
http://www.amazon.com/NOKIA-CA-157-Adapter-cable-Nokia/dp/B0050LO0QE
i just use the one that came with the nokia n8, works just fine
Alpha Class said:
http://www.amazon.com/NOKIA-CA-157-Adapter-cable-Nokia/dp/B0050LO0QE
i just use the one that came with the nokia n8, works just fine
Click to expand...
Click to collapse
You use that one with the Galaxy Nexus?
Looks like it has a MicroUSB-A plug, which shouldn't fit into the Galaxy Nexus's MicroUSB-B port.
Chirality said:
You use that one with the Galaxy Nexus?
Looks like it has a MicroUSB-A plug, which shouldn't fit into the Galaxy Nexus's MicroUSB-B port.
Click to expand...
Click to collapse
correct, just trim the corners, 2 sec job
I bought a 2$ cable from dealextreme for the Galaxy S2. You can find them at the same price on ebay... they work fine, tested with a USB pen and a SIXAXIS.
Now waiting for franco to update his kernel with the NTFS module to try out my external HDD.
Alpha Class said:
correct, just trim the corners, 2 sec job
Click to expand...
Click to collapse
Trim the corners on the cable? Or the GN?
Chirality said:
Trim the corners on the cable? Or the GN?
Click to expand...
Click to collapse
on the cable itself
mind you i did this simply because i had the cable lying around and it wasn't being used
its only a suggestion for the cheap among us , i suppose if i had to buy a cable, i'd just plop down for the micro b
is there a usb otg cable capable of allowing charge and being the host at the same time? or is it even possible? i'm reading mixed results on this. that it is possible and it's not. i want to scream.
pukemon said:
is there a usb otg cable capable of allowing charge and being the host at the same time? or is it even possible? i'm reading mixed results on this. that it is possible and it's not. i want to scream.
Click to expand...
Click to collapse
What you are looking for is a USB Accessory Charger Adapter, which exists in the USB spec but does not seem to actually exist in physical form.
Chirality said:
What you are looking for is a USB Accessory Charger Adapter, which exists in the USB spec but does not seem to actually exist in physical form.
Click to expand...
Click to collapse
so what you are implying is a usb accessory that is kind of passive but allows charging, and if you boink it with another micro usb accessory, usb otg cable here, that it will allow the necessary usb spec for otg also? hmmm...
pukemon said:
so what you are implying is a usb accessory that is kind of passive but allows charging, and if you boink it with another micro usb accessory, usb otg cable here, that it will allow the necessary usb spec for otg also? hmmm...
Click to expand...
Click to collapse
No, what it is is a special USB OTG adapter that has three connectors, a micro USB plug to plug into the host device, a USB socket to plug in the peripheral device, and a micro USB socket to plug in a charger. It also supplies a special resistance on the ID pin to the host device to let it know that a charger is connected so the host does not supply a voltage on the VBUS. Without this special adapter with the ID pin resistance, the host will supply a voltage to power the peripheral which will not work with the charger on the VBUS. Thus this special adapter is needed. This is defined in the USB OTG and Battery Charging specs, but so far it doesn't seem like anyone is manufacturing such a thing.
Chirality said:
Has anyone been able to find a USB-OTG adapter for the Galaxy Nexus similar to the USB adapter for the Galaxy Tab (pictured below), i.e. one that's just a compact adapter without a cable between the two sides?
Click to expand...
Click to collapse
Here http://www.dealextreme.com/p/micro-usb-on-the-go-host-otg-adapter-pair-50774
Chirality said:
No, what it is is a special USB OTG adapter that has three connectors, a micro USB plug to plug into the host device, a USB socket to plug in the peripheral device, and a micro USB socket to plug in a charger. It also supplies a special resistance on the ID pin to the host device to let it know that a charger is connected so the host does not supply a voltage on the VBUS. Without this special adapter with the ID pin resistance, the host will supply a voltage to power the peripheral which will not work with the charger on the VBUS. Thus this special adapter is needed. This is defined in the USB OTG and Battery Charging specs, but so far it doesn't seem like anyone is manufacturing such a thing.
Click to expand...
Click to collapse
Would anybody be able to help make a cable to allow this functionality? I have Muscular Dystrophy and want to use my HTC Evo 3D with the specialized HID USB mouse emulator that's integrated into my wheelchair. This is how I control my desktop PC.
Because I also use the mouse emulator and voice recognition the battery life of the phone isn't that great. I would like to power the phone with a cigarette lighter adapter plugged into my chair.
Thanks!
IT doesnt work on HTC phones. I tried a gew hours ago, since nkbody knew i was forced to buy myself a usb otg cable. Plugged it in the Sensation, and a logitech G35 on the other side. no result, tried with regular usb stick still no result
Sent from my HTC Sensation Z710e using XDA Premium App
What file system are you guys using?
I can't seem to get the phone to read exFAT.
Also can't find ext4 drivers for Windows
FAT32 is not an option since the movies I want to watch are over 4gb.
derkgates said:
Would anybody be able to help make a cable to allow this functionality? I have Muscular Dystrophy and want to use my HTC Evo 3D with the specialized HID USB mouse emulator that's integrated into my wheelchair. This is how I control my desktop PC.
Because I also use the mouse emulator and voice recognition the battery life of the phone isn't that great. I would like to power the phone with a cigarette lighter adapter plugged into my chair.
Thanks!
Click to expand...
Click to collapse
I'll try to do some research and tests and try to make something to help you and other people with similar needs!
I can mount ntfs with "USB Host Controller v0.44" app and 3.0.8-franco.Kernel R140 kernel.
Recently bought this adapter from amazon, a mfg named +pwr. It makes your lower power (computer and non samsung ac adapter) usb ports look like full power ports. Using it removes the red X from the charging icon and also allows the device to draw the max power available on the port - it's not going to magically make a 1 amp usb port draw 2 amps - but it will allow the device to draw max instead of a lower rate due to low power charging mode.
I've tested this on my PC, in my car and on an older Samsung ac adapter.
Well worth the 5 bucks I'd say. I'm planning to get one for each of my charge points and leave them installed.
http://www.amazon.com/gp/product/B007IXBTCK/ref=oh_details_o02_s00_i00
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just got the exact same one too. Works great! I'dstill prefer a software hack so I wouldn't risk losing it in my backpack though.
Sent from my GT-N8013 using Tapatalk 2
deal extreme has a few options
http://dx.com/p/usb-power-adapter-for-samsung-p1000-81753
http://dx.com/p/usb-data-charging-extension-cable-for-samsung-p1000-black-91141
http://dx.com/p/designer-s-usb-char...tch-for-samsung-p1000-black-95cm-length-72276
I was looking at their combo deal with the extra long cord and the usb filter. Now I really have to bite the bullet and get it. Thanks!
santiagodraco said:
Recently bought this adapter from amazon, a mfg named +pwr. It makes your lower power (computer and non samsung ac adapter) usb ports look like full power ports. Using it removes the red X from the charging icon and also allows the device to draw the max power available on the port - it's not going to magically make a 1 amp usb port draw 2 amps - but it will allow the device to draw max instead of a lower rate due to low power charging mode.
I've tested this on my PC, in my car and on an older Samsung ac adapter.
Well worth the 5 bucks I'd say. I'm planning to get one for each of my charge points and leave them installed.
http://www.amazon.com/gp/product/B007IXBTCK/ref=oh_details_o02_s00_i00
Click to expand...
Click to collapse
Just be careful. There are adapters out there that were of an older design, primarily for the issue with iOS devices. Those won't work (you'll still see the red x). The one from Amazon works (I've tested it) but I can't comment on others. I'd suggest making sure that it at least explicitly states newer Samsung devices to be safe.
I don't suppose anyone knows of anyone in the UK doing these ? They are quoting 6-8 weeks for delivery to UK.
I've done a quick search, but am wary of knock-offs as OP rightly warned about. Would like to get something like this that people have tried and tested, but would prefer not to have to wait 2 months to get it !
Its by the same company. Think itll be the same?
santiagodraco said:
Just be careful. There are adapters out there that were of an older design, primarily for the issue with iOS devices. Those won't work (you'll still see the red x). The one from Amazon works (I've tested it) but I can't comment on others. I'd suggest making sure that it at least explicitly states newer Samsung devices to be safe.
Click to expand...
Click to collapse
Sent from my SCH-I535 using xda app-developers app
The company PWR+ is selling these direct on eBay for 5.90 with free shipping. On amazon you have to pay 4.99 for shipping.
wilsojer said:
I don't suppose anyone knows of anyone in the UK doing these ? They are quoting 6-8 weeks for delivery to UK.
I've done a quick search, but am wary of knock-offs as OP rightly warned about. Would like to get something like this that people have tried and tested, but would prefer not to have to wait 2 months to get it !
Click to expand...
Click to collapse
Not quite the same as this fits on the other end, but if you have a micro USB cable it works perfectly. Tried and tested on a standard USB charger, PC and laptop. Arrived in two days.
http://www.amazon.co.uk/gp/product/B009ZQKMDA/
dazzyb2k3 said:
Not quite the same as this fits on the other end, but if you have a micro USB cable it works perfectly. Tried and tested on a standard USB charger, PC and laptop. Arrived in two days.
http://www.amazon.co.uk/gp/product/B009ZQKMDA/
Click to expand...
Click to collapse
That's excellent - thanks for the steer. Just ordered one.
Any one found anything like this is the UK yet?
Sent from my GT-N8010 using xda premium
i just imported one as i can wait a month for something like that tbh.
does anyone know how this removes the red x.im building a hard wired cable and power supply box for my car.im feeding the tab 2 amps but it still has the x.
camo.b said:
Does anyone know how this removes the red x?
Click to expand...
Click to collapse
There's some resistors between the VBus+/GND and the shorted D+/D- lines that Samsung uses to make their chargers proprietary. See here.
Using this adapter - would it be possible to connect a portable HDD to the Note 10.1, without the use of a powered USB hub?
pr0xZen said:
Using this adapter - would it be possible to connect a portable HDD to the Note 10.1, without the use of a powered USB hub?
Click to expand...
Click to collapse
No, in fact this adapter eliminates all USB data connections.
pr0xZen said:
Using this adapter - would it be possible to connect a portable HDD to the Note 10.1, without the use of a powered USB hub?
Click to expand...
Click to collapse
I think this one is used to charge your tab through usb from your computer.
you can also order these for 99 c a pop via tvcmall .
i ordered 10 of them and they work flawlessly!
as a matter of fact i can confirm that not only do they charge super fast...my battery life has imnproved about 50 percent better.
Sent from my GT-N8000 using XDA Premium HD app
mrbogusbaxter said:
... my battery life has improved about 50 percent better
Click to expand...
Click to collapse
Eh? This adapter couldn't do anything about that ...!
you can also order these for 99 c a pop via tvcmall .
i ordered 10 of them and they work flawlessly!
as a matter of fact i can confirm that not only do they charge super fast...my battery life has imnproved about 50 percent better.
Im calling spam on this one....
Well, is there?
I want to know this too. Can't see giving up a major feature like HDMI out.
Also, is there a ROM beside stock ROM which has IR blaster working?
According to the latest commit of V500 CM11 repo, it should be working now.
https://github.com/CyanogenMod/android_device_lge_v500/commits/cm-11.0
But I can't test for now cause I don't have Slimport cable.
tr0m4tik said:
According to the latest commit of V500 CM11 repo, it should be working now.
https://github.com/CyanogenMod/android_device_lge_v500/commits/cm-11.0
But I can't test for now cause I don't have Slimport cable.
Click to expand...
Click to collapse
Hopefully, somebody who's using CM will test this and let us know if it works.
woody1 said:
Hopefully, somebody who's using CM will test this and let us know if it works.
Click to expand...
Click to collapse
Yeah... that would be very nice to know.
On Mahdi ROM it should definitely work now
http://forum.xda-developers.com/showpost.php?p=49571934&postcount=276
Hibble said:
On Mahdi ROM it should definitely work now
http://forum.xda-developers.com/showpost.php?p=49571934&postcount=276
Click to expand...
Click to collapse
Indeed. It definitely works, and to be sure I just watched a YouTube video, fullscreen, on my TV. It took a bit to establish a connection, going through some "unknown format" phases, but it connected allright and was perfectly stable and smooth.
Mercvtio said:
Indeed. It definitely works, and to be sure I just watched a YouTube video, fullscreen, on my TV. It took a bit to establish a connection, going through some "unknown format" phases, but it connected allright and was perfectly stable and smooth.
Click to expand...
Click to collapse
Has anybody tested it on Malladus? From what I understand, that's based on the LG stock rom.
woody1 said:
Has anybody tested it on Malladus? From what I understand, that's based on the LG stock rom.
Click to expand...
Click to collapse
Yes, I did, and it works. To be fair, I stayed on Malladus for some weeks, because it was the only rom with proper hdmi streaming.
works on CM11
It works on my LG G Pad with the CM 11 nightly cm-11-20140119-NIGHTLY-v500.zip ROM
using Slimport to HDMI cable !
ivanegg said:
It works on my LG G Pad with the CM 11 nightly cm-11-20140119-NIGHTLY-v500.zip ROM
using Slimport to HDMI cable !
Click to expand...
Click to collapse
Wow, truly interesting! Which cable did you use? Would it be possible to see a demonstration? :cyclops:
I have mentioned that in the G Pad Accessories Forum
http://forum.xda-developers.com/showthread.php?t=2569809&page=2
I bought one in Hong Kong !
It's NOT an Adapter, it's a direct micro USB to HDMI male plug Cable !!! with optional micro usb plug for charging !!!
HKD - $200 = around USD $25 - 26
Well... I don't want to setup my HTC One and shoot video of my LG G Pad and my 27" Dell Monitor.
What I did is, just plug in the HDMI and micro USB, and it works, it do take around 2 seconds to display the G Pad content on the Monitor.
But it run smoothly afterwards. with sound output from through HDMI also.
ivanegg said:
I have mentioned that in the G Pad Accessories Forum
http://forum.xda-developers.com/showthread.php?t=2569809&page=2
I bought one in Hong Kong !
It's NOT an Adapter, it's a direct micro USB to HDMI male plug Cable !!! with optional micro usb plug for charging !!!
HKD - $200 = around USD $25 - 26
Well... I don't want to setup my HTC One and shoot video of my LG G Pad and my 27" Dell Monitor.
What I did is, just plug in the HDMI and micro USB, and it works, it do take around 2 seconds to display the G Pad content on the Monitor.
But it run smoothly afterwards. with sound output from through HDMI also.
Click to expand...
Click to collapse
That's weird. You're saying that you're seeing direct HDMI out with a micro USB to HDMI cable? I didn't think that the G Pad was capable of that. What rom are you using?
Can you give us a picture of just the cable?
What the ???
I am just sharing my own experience, and you don't believe it ?
maybe I missed something, I am using a SLIMPORT to HDMI CABLE !!!! Male micro USB plug to Male HDMI Plug !!!
You don't believe that because you haven't seen this before ??
Do a simple search IN GOOGLE !! Search PICTURE or PHOTOS, and then type "Slimport to HDMI CABLE" !!! That's it !!
---------- Post added at 01:36 AM ---------- Previous post was at 01:28 AM ----------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Slimport micro USB to HDMI Cable !!!
Any Special settings needed in CM11?
This cable does not work on the 20 Jan CM11. Unless there are some special settings.
http://www.amazon.com/gp/product/B009LAZG2M/
http://www.amazon.com/gp/product/B00AWHPGJQ/ (Using this only when using S3)
EDIT: I flashed back to rooted Stock and the cable does not work with that ROM either.
The cable does work with KitKat in OG Galaxy Nexus (ShinyROM) and with Galaxy S3 with CleanROM 7 (based on Samsung Stock).
Looks like the G Pad is very picky which cable works. This is a drawback of the LG I guess.
wpbear said:
Any Special settings needed in CM11?
This cable does not work on the 20 Jan CM11. Unless there are some special settings.
http://www.amazon.com/gp/product/B009LAZG2M/
http://www.amazon.com/gp/product/B00AWHPGJQ/ (Using this only when using S3)
EDIT: I flashed back to rooted Stock and the cable does not work with that ROM either.
The cable does work with KitKat in OG Galaxy Nexus (ShinyROM) and with Galaxy S3 with CleanROM 7 (based on Samsung Stock).
Looks like the G Pad is very picky which cable works. This is a drawback of the LG I guess.
Click to expand...
Click to collapse
You are using an MHL cable... The G Pad has a Slimport, not MHL port.
Thanks, This explains the difference. http://blog.clove.co.uk/2013/11/07/mhl-v-slimportwhat-is-the-difference/
Another money grab for accessory companies!
ivanegg said:
What the ???
I am just sharing my own experience, and you don't believe it ?
maybe I missed something, I am using a SLIMPORT to HDMI CABLE !!!! Male micro USB plug to Male HDMI Plug !!!
You don't believe that because you haven't seen this before ??
Do a simple search IN GOOGLE !! Search PICTURE or PHOTOS, and then type "Slimport to HDMI CABLE" !!! That's it !!
---------- Post added at 01:36 AM ---------- Previous post was at 01:28 AM ----------
Slimport micro USB to HDMI Cable !!!
Click to expand...
Click to collapse
You did miss something. You didn't describe it as a Slimport adapter. You said that it wasn't an adapter but a direct micro USB to HDMI cable. That's not the same thing as a Slimport adapter. Now, you are contradicting yourself by saying that it is, indeed, a Slimport adapter and not a direct micro USB to HDMI cable. I'm sure that this is just a language issue on your part, but maybe you can see why I was confused by your post.
woody1 said:
You did miss something. You didn't describe it as a Slimport adapter. You said that it wasn't an adapter but a direct micro USB to HDMI cable. That's not the same thing as a Slimport adapter. Now, you are contradicting yourself by saying that it is, indeed, a Slimport adapter and not a direct micro USB to HDMI cable. I'm sure that this is just a language issue on your part, but maybe you can see why I was confused by your post.
Click to expand...
Click to collapse
Your eyes have problem ???
It's NOT an Adapter !!! It's an CABLE !!! AM I RIGHT ???
It's Male micro USB to Male HDMI . If it is an ADAPTER, then, extra additional USB CABLE IS needed !, RIGHT ?
ALSO, I admitted that I missed saying that it's slimport port to HDMI, but I didn't SAY IT ISN'T !!!!
My language have problem or yours ??? Please read every sentence !!!
--update--
If you are not rooted you will need to have the screen locked, in the beginning I was using the pattern lock. Right now I have a custom ROM (CM11) with root and have installed the "Moto Floating Charge" (needs root). That way I don't need the pattern lock. You can find more information about the Moto Floating Charge here.
----------
Based on this xda topic, I decided to do the same.Unfortunately, that thing hanging out of the phone and the cancellation of the micro usb port was not a good option for me. So I decided to try to put the adapter inside the phone.
The adapter:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First we need to remove the 14 torx screws on the back of the phone.
If you need some help, just see this disassemble video until minute 2:20, including the part of disconnecting the battery!
https://www.youtube.com/watch?v=Fd3AZSXhOf8
First I looked in to the micro usb adapter to see what contact's was using, in this case (I don't know if they are all the same) it was the 2 in the edges.
I opened the adapter (It's just some sticky paper) and found out the main 2 spot's (+5v and ground) and a third spot that says 5v +1. Have not used it but it's there.
Green - 5v +1 (not used)
Blue - Ground
Red - 5V
I then connected the adapter to the phone and made a continuity test with the*multimeter and found the 5v spot and a lot of ground spots has normal.
The installation:
First I removed the connector and installed 2 wires.
Then put it in the right place using a double sided sticker (included).
Then solder the 5V:
Then the ground and it's all done:
Now just install the back cover, and put the screws back on. You wont*even notice it's there.
If you need some help, just ask.
Here it is in action:
http://www.youtube.com/watch?v=UxTYZ6qFJU0
Thanks! I'll try it in one week. I opened my Moto G already it is very easy.
We can charge normally than with cabel too? Or will it destroy something?
And change files via usb-cabel on PC will work too?
SWTR said:
Thanks! I'll try it in one week. I opened my Moto G already it is very easy.
We can charge normally than with cabel too? Or will it destroy something?
And change files via usb-cabel on PC will work too?
Click to expand...
Click to collapse
that was my question too. i whant wirless charging but keep usb data too
idk if it will work with my otterbox commutter
SWTR said:
Thanks! I'll try it in one week. I opened my Moto G already it is very easy.
We can charge normally than with cabel too? Or will it destroy something?
And change files via usb-cabel on PC will work too?
Click to expand...
Click to collapse
MaLiXs said:
that was my question too. i whant wirless charging but keep usb data too
idk if it will work with my otterbox commutter
Click to expand...
Click to collapse
Everything working normally. :victory:
jamlvs said:
Everything working normally. :victory:
Click to expand...
Click to collapse
Great!
Is this a good product?
http://m.ebay.de/itm/151257762028
SWTR said:
Great!
Is this a good product?
http://m.ebay.de/itm/151257762028
Click to expand...
Click to collapse
That will do. The "problem" with that model is being all in plastic so it is slippery. Mine is the "Qi K8" model and the center is a kind of "rubbered" material. Just confirm the output, mine is 5V 700 - 1000 mA.
Sweet!
That's awesome! Good work! I just might have to do this. Anyway, I have a question. Do you think it would cause a problem if you had the USB cable plugged in AND it sitting on the charger? Not that I'm ever going to do that, but just curious.
Good work finding alternative soldering points. The micro usb connectors are so tiny
Time to get the screwdriver out
Just like i did in the other thread, that's a great mod you've done mate.
djeborn said:
That's awesome! Good work! I just might have to do this. Anyway, I have a question. Do you think it would cause a problem if you had the USB cable plugged in AND it sitting on the charger? Not that I'm ever going to do that, but just curious.
Click to expand...
Click to collapse
The answer:
http://www.youtube.com/watch?v=i95W7oI0a80
Kameo said:
Just like i did in the other thread, that's a great mod you've done mate.
Click to expand...
Click to collapse
Thanks.
hey @jamlvs thanks for the great tutorial...
but... what if my phone is already on the wireless charging base and i connect the usb cable to a computer... will the data transfer work properly?
EvilDragonEX said:
hey @jamlvs thanks for the great tutorial...
but... what if my phone is already on the wireless charging base and i connect the usb cable to a computer... will the data transfer work properly?
Click to expand...
Click to collapse
Connecting the USB cable will work has it should and the wireless charging will not interfere in the data transfer or the charging (since is already charging).
Wow this is slick, never really soldered small electronics before though, not sure if I want to go there.
rugerredhawk said:
Wow this is slick, never really soldered small electronics before though, not sure if I want to go there.
Click to expand...
Click to collapse
Same here but I'm welling to risk it ..
Sent from my XT1031 using XDA Premium 4 mobile app
---------- Post added at 05:21 PM ---------- Previous post was at 05:20 PM ----------
Once I get that part, how do I charge my phone?lol
Sent from my XT1031 using XDA Premium 4 mobile app
you need a QI Wireless charger. It's a pad which you put your phone onto and will send "waves" to the receiver you've just plugged/soldered.
Sent from my MotoG using Tapatalk.
Is this a good one?
http://m.tinydeal.com/de/product/universal-wireless-charger-receiver-module-w-micro-usb-122450
Because it charge 1000mAh.
SWTR said:
Is this a good one?
http://m.tinydeal.com/de/product/universal-wireless-charger-receiver-module-w-micro-usb-122450
Because it charge 1000mAh.
Click to expand...
Click to collapse
It looks like mine but mine is 600mA, that must charge faster with a 1000mA charger. It's a QI just like mine, go for it. :good:
Thank you so much for the video of it being plugged in while wireless charging! I'll probably do this at some point. Good work!
This is a really great job. Well done
Do we have to set lockscreen patern for this mod?