help me plzzzz - HTC Wildfire S

hello I buy a htc wildfire s A510e. but unfortunately I did not find the Arabic language. how did I do to install help me please thank you

What's ur sector I mean Europe Asia like so,....
And I think u can jst find Arabic ruu in footballs thread...
Jst down load the Arabic ruu and enable USB debugging in your mobile then install HTC sync in your PC(only HTC drivers are needed )
Power off your marvel
Take the battery out really insert it and holding the volume down button turn phone on..
Select fastboot and coonect to PC.
Then run the ruu downloaded from footballs thread...
check out whether ma thnx button wrkz....
Sent from my HTC Wildfire S A510e using xda premium

Related

Anybody help plzzzzzz.....

Hi...
I m very new to android. I want to upgrade to froyo from current 2.1
Can anybody guide me step by step plzzzzzzzzz....????
Plzzzz do reply...
Further, i have windows 7 in my laptop and i installed htc sync 3.0 but when i connect my wildfire to pc, i get error on phone that htc sync could not be found on pc.
Sent from my HTC Wildfire using XDA App
No need for 2 topics.
For froyo flash custom roms that state they have froyo. Instructions included in their respective topics. Also, less begging, more googling.
maaz_obaid said:
Hi...
I m very new to android. I want to upgrade to froyo from current 2.1
Can anybody guide me step by step plzzzzzzzzz....????
Plzzzz do reply...
Further, i have windows 7 in my laptop and i installed htc sync 3.0 but when i connect my wildfire to pc, i get error on phone that htc sync could not be found on pc.
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
1. you don't need htc sync, well not me anyway. i just installed the hboot drivers, plugged phone via usb with debugging mode on (and boot into bootloader - it should say hboot usb plugin) and ran the unrevoked reflash tool and let it run.
2. copy the rom you wanna flash onto sd card.
3. boot into bootloader again (hold trackpad and press power button)
4. select bootloader -> select recovery -> install zip from sd card -> pick the rom you wanna flash.
5. reboot.
6. done.
are you not getting the Over The air prompt?
the easy way is that you update your phone with wi fi in phone menu/settings
i9000blackrain said:
the easy way is that you update your phone with wi fi in phone menu/settings
Click to expand...
Click to collapse
Only when the Wildfire is unbranded... when it´s provider-branded you have to wait till the provider releases Froyo....
The fastest way is the one that kevin2516 posted.
For more informations and tutorials take a look in the Wildfire Development Forum!
im running cm 7 nightly build 19 n thnx to xda members for guiding whenever i had a problem.
Sent from my HTC Wildfire using XDA App

[Q] debranding?s-on/of

can you debrand you htc wildfire s if you have s-on or not ? not sure though i would ask ?
I have 2.3.3, 1.38.901.2 version from Tim Italy. No chance until now for debranding... I try it all kind of debrandig from over all internet, nothng, with, without gold card, with zip firmaware , or exe firmware ... stock 1.34.xxx.x. Nothing, only at the end ...is telling me main version is older , tryt and This one , nothing is stuck ...so until S-OFF i thing nothing can change taht .... DAMN!
Sent from my HTC Wildfire S A510e using XDA App
Fix for all that is here:
http://forum.xda-developers.com/showthread.php?t=1162971

Wildfire s questions (Dutch)

Hello,
i have a few questions:
1:When i connect my wildfire s to my computer it says 'usb device is not recognised'.
What can i do to fix?
2:I checked if my wildfire is s-off but it is not. I want to make it faster (overclock) is this posseble with the security on? if yes, how!?
3:For peaple who live in the netherlands,witch store can S- off my phone?
Tnx allready!
Greetings
Daan Coumans
1 check USB storage mode
2 you need s-off
3 I don't know but in Belgium you need to buy it online, no shop
Sent from my HTC Wildfire S A510e using XDA App
i know its on storage mode but still doesnt recognise..
tnx for ur reaction

Problem with HTC DESIRE

I got this phone from a friend and its not working
as i know it was broken when somebody tried to update it...
I have attached file.
Please tell me how exactly i can repair the phone...
Also it dont start everytime.. and sometimes it vibrates a few times
Go to desire Q&A/Stickies and read bortak's troubleshooting guide, he covers this.
Sent from my HTC Desire
if the hboot is still stock then running the RUU may solve this problem
Can you go into recovery? have you made any backup?
Usama Ahmed said:
Can you go into recovery? have you made any backup?
Click to expand...
Click to collapse
He got the phone like that off a friend. I dont think hes worried about a backup lol. Pull the battery out and put back in then hold volume down + hold power button down for bout 3-4 seconds and a menu will come up then say if your s-on/ s-off etc etc. Bortak's guide covers this anyway, think its numer [4] in the guide.
Sent from my HTC Desire
posting as much info as much you can, post the screen when you unplug usb cable, mostly hboot version, s-on/off etc
running CORRECT RUU or 2.3.3 RUU from htcdev.com(some risk involved) may sort it...
jmcclue said:
He got the phone like that off a friend. I dont think hes worried about a backup lol. Pull the battery out and put back in then hold volume down + hold power button down for bout 3-4 seconds and a menu will come up then say if your s-on/ s-off etc etc. Bortak's guide covers this anyway, think its numer [4] in the guide.
Sent from my HTC Desire
Click to expand...
Click to collapse
It only start when the USB cable is plugged in the computer or in the charger.
I cant start it without usb cable plugged somewhere... it only shows me the picture posted above.
When it is plugged in the computer and i start it with volume down+power it shows me the picture posted in previous posts, but when i remove the USB cable it shosw me the picture below, and i cant do anything
Please tell me what i can do..
I will read again the previous posts and try to search, but if somebody is sure what is the problem, please post here
Thanks
You need to flash RUU, download 2.29 WWE RUU and post result
Sent from my HTC Sensation Z710e using XDA Premium App
you can download the ruu wwe 2.29 from bortak's guide. go down too (2) and theres a link there
Sent from my HTC Desire
that dont work... maybe i have to make it S OFF first?
can u get in to fastboot? hold back button + power
Sent from my HTC Desire
jmcclue said:
can u get in to fastboot? hold back button + power
Sent from my HTC Desire
Click to expand...
Click to collapse
no, nothing happens
what error does 2.29 WWE RUU give you?
No, you need S-OFF only for advanced playing with your device. A normal, so called stock device should work with S-ON.
What does happen, when you try to install the RUU? What king of OS do you use? Is there a error message? Did you ever try to access an android via adb or fastboot?
I had this problem. Use a PB99IMG.zip file, extract it and fastboot flash the hboot, the reboot-bootloader,then flash system.img and boot.img (in that order). Then fastboot oem boot and if it boots execute the android 2.3 upgrade zip from htcdev.com
Let us know if you repair it....
Sent from my HTC Desire HD using XDA

[Q] Need Help "My desire bricked"

Hi Xda members , i just need help about my smart phone
After when i flashed by update utility it stuck on 18% but i leave it for almost 30mn and it disconnect automatically , after that it give black screen
please help me ''Htc desire (Bravo)'' Operator=T-mobile Ger
Sorry for my inconvenience and english hope someone can help me
Thanks a lot XDA
Flash the 2.3 ruu in my sig.
Download the zip, put it on your the root of your sd-card (outside any folder), boot in hboot and select "yes".

Categories

Resources