I'm currently running GB El29 and am looking to update. I've done a lot of reading around the forum, the wiki, and a few other websites, and I'd just like a little bit of clarification. I figure I'd ask now, before doing anything, as opposed to asking later, after something's gone wrong.
Looking at the Wiki, I was considering updating to Calkulin's E4GT 2 v1.6, or unrooting and then waiting for the Official ICS update (it was rerolled today, apparently.) Or, to Blazer, but I'm not sure if going to the ICS version or GB version is best.
My question - The process to update - Nandroid, Flash Format All, Flash Rom, Success? I've noticed a lot of installs say to "Wipe All", and I assume that's what Flashing Format All does, correct? I just don't want to mess up - I had no problems rooting, following that guide I mentioned, and I've done a lot of reading...I just want to confirm before doing anything. I mean, I know, wipe delvic and clear cache, but Format All does that, correct?
I rooted my phone using "How to Root Galaxy S2 Epic 4G Touch! [NEW][SPH-D710]" rom Epic4gtouchroot.com. I'd post a link, but I've fewer than 10 posts. All I've done, outside of root, is install the Beats sound files. That's really it.
Any help at all would be greatly appreciated.
Read this 10 times over then you should be fine.
http://forum.xda-developers.com/showthread.php?t=1525495
If you are interested in certin roms read threw the rom post to see if people have already answerd the questions you seek. Some devs request you flash different ways so read the OP in the post of the roms you are considering
UnOfficial
Read this once, stay with gingerbread, try Calks E4GT V. 3.0 YOU won't regret it.
Pp.
Delivered to you via Mayan technology .
PanchoPlanet said:
Read this once, stay with gingerbread, try Calks E4GT V. 3.0 YOU won't regret it.
Pp.
Delivered to you via Mayan technology .
Click to expand...
Click to collapse
Yeah, that's what I was thinking of going with. I've read over his topic several times, and even though I'm really not a fan of the transparent notification tray, most of the included mods sound really, really useful. Thanks for the heads up.
And thank you too, jugaloo. I actually have that page bookmarked on my phone lol. I've already made several nandroid backups - I plan on making a titanium backup in a moment. My only concern now is th process from going from El29 GB to E4GT 3. Rereading that thread several times has me wondering - I download the ROM, place it on the SD, boot into recovery, clear delvic and cache, run Format all, then install the ROM, correct? I already have a nandroid backup, so in case anything here goes wrong, I can just flash the backup back on, correct?
IceCatraz said:
Yeah, that's what I was thinking of going with. I've read over his topic several times, and even though I'm really not a fan of the transparent notification tray, most of the included mods sound really, really useful. Thanks for the heads up.
And thank you too, jugaloo. I actually have that page bookmarked on my phone lol. I've already made several nandroid backups - I plan on making a titanium backup in a moment. My only concern now is th process from going from El29 GB to E4GT 3. Rereading that thread several times has me wondering - I download the ROM, place it on the SD, boot into recovery, clear delvic and cache, run Format all, then install the ROM, correct? I already have a nandroid backup, so in case anything here goes wrong, I can just flash the backup back on, correct?
Click to expand...
Click to collapse
I just run the format x2 script made by ruj in the blu kuban thread. Then i follow the devs op to install. From what i see you have your feet planted and ur about to make that plunge. Id take the next step and try the flash. Id go with a different rom the the fe22 is out of date and calk has moved on. Try blu kubans rom its super stable and ita built from source. I myself like gb better.
UnOfficial
juggalo1300 said:
I just run the format x2 script made by ruj in the blu kuban thread. Then i follow the devs op to install. From what i see you have your feet planted and ur about to make that plunge. Id take the next step and try the flash. Id go with a different rom the the fe22 is out of date and calk has moved on. Try blu kubans rom its super stable and ita built from source. I myself like gb better.
UnOfficial
Click to expand...
Click to collapse
I was thinking that - Calk's topic was updated in May, while blukuban was updated in February. I mean, I can always try both, right? I'd like to go with Calk's first, then try blukuban, only because BK is heavily themed. But either way, thanks!
Edit
I didn't realize the blukuban thread had updates outside of the OP. It was very recently updated. I might check that one out first.
Yes the blu kuban ics is always up todate and he is there for the people. If you want ics builds that are more stockish id aokp they have theming going on but is nice and stable. Read all of the op and there sites for correct install. Cm9 alpha 6 is also really good. Blazers rom is also really good. Those are all stockish built from source. For gb roms id go with either calks 3.0 or UnOfifcials ics gb rom. For me gb gives me most bang for battery and bandwith. Those last two roms are highly recomended. Calks is super fast stock with options for themes. Unofficial gb ics is themed lightly and is very good for battery and the animations are nice
UnOfficial
Alright, awesome. Waiting for my battery to finish charging (my phone reset while performing a titanium backup, and the battery life dropped from 44 to 9, so I'm getting it back up to at least 50.)
So just to recap
-
To Install
Boot to recovery
Make a NAND Backup
Wipe Phone (Format All/wipe delvic/wipe cache)
Install ROM
Right? That's what Blukuban's install requires, and Calk's doesn't have any special instructions, outside of " a wipe is recommended BEFORE flashing if coming from another ROM", which is what the Format All is for, correct?
You've been insanely helpful. Thank you so much! I'm also looking into UnOfficial (it's not on the Wiki, so I didn't really know about it until you mentioned it.
IceCatraz said:
Alright, awesome. Waiting for my battery to finish charging (my phone reset while performing a titanium backup, and the battery life dropped from 44 to 9, so I'm getting it back up to at least 50.)
So just to recap
-
To Install
Boot to recovery
Make a NAND Backup
Wipe Phone (Format All/wipe delvic/wipe cache)
Install ROM
Right? That's what Blukuban's install requires, and Calk's doesn't have any special instructions, outside of " a wipe is recommended BEFORE flashing if coming from another ROM", which is what the Format All is for, correct?
You've been insanely helpful. Thank you so much! I'm also looking into UnOfficial (it's not on the Wiki, so I didn't really know about it until you mentioned it.)
Click to expand...
Click to collapse
Charge the bartery more. Use a wipe script dont touch the fomat that is built into the cwm while flashing a ics rom. If you use the wipe x2 script found here
http://forum.xda-developers.com/showthread.php?p=25448865
U should be good. It wipes everythings even both of the caches twice. If you already have a newer nandroid id just go with that instead of making a new one everytime you flash. If possible download the roms to pc check the md5 check sums make sure they match. If they match transfer to the phone. When downloading to the phone it has a higher chance of a bad download. I try and flash at 75% battery incase of error and you have to restore a previous nandroid. If you want read this post about the eMMc bug. Most roms are safe now but some are not current.
http://forum.xda-developers.com/showthread.php?t=1644364
Not trying to scare you with that last link you should know about it before hand so you know the dangers of flashing a non safe ics roms. If you have any more queations shoot. But i think your good to go
UnOfficial
One more thing. Qbking27 has install video guides for 90% of the roms in the threads of the rom. Id watch those before installing that rom you want. Some times they are buried in the op. You can use them as a step by step as you install. Best if luck to you and i want a report once you get your new custom rom on your phone.
UnOfficial
You got it!
I'm doing a GB build - from what I've come across, GB just gets better battery life, and I just feel more comfortable using it. At least, until the official ICS rolls out from Samsung. If that one is well received, and it's worth it, I'll unroot/wipe fresh and try it out.
That being said though, I'll use x2 then. Will it matter if I do both, just for good, measure? (Both x2 and FormatAll)
And yes, I'll be downloading to PC first, then transferring. I feel more comfortable doing it that way. I'll be doing Calk's 3.0 first, and if I don't like it, I'll try either Unofficial or BluKuban.
And once it's done charging more, and I perform the install, I'll report back, with a screenshot or two as well.
IceCatraz said:
You got it!
I'm doing a GB build - from what I've come across, GB just gets better battery life, and I just feel more comfortable using it. At least, until the official ICS rolls out from Samsung. If that one is well received, and it's worth it, I'll unroot/wipe fresh and try it out.
That being said though, I'll use x2 then. Will it matter if I do both, just for good, measure? (Both x2 and FormatAll)
And yes, I'll be downloading to PC first, then transferring. I feel more comfortable doing it that way. I'll be doing Calk's 3.0 first, and if I don't like it, I'll try either Unofficial or BluKuban.
And once it's done charging more, and I perform the install, I'll report back, with a screenshot or two as well.
Click to expand...
Click to collapse
Just use the wipe x2 that does everything you need. Blu kubans gb rom is good but wifi is whacky. Id go with his ics build. Well your set good luck!
UnOfficial
Alright so, I installed it, and all is working well. It's actually a bit...erm, slow? Whenever I swipe from screen to screen on the homepage it's a bit laggish. But it works! I'll run around with it for a little while and see how it works. I'm in the process of reinstalling my older apps, updating my contacts and such.
Thanks for all of your help!
Edit
A little worried, to be honest. Some of the apps I'm trying to install is giving me the "Package file is invalid" error off of the Google Market. Dropbox, Amazon, etc. Not sure what to make of it, to be honest.
Try and clear the cache for the market. If your using tb try to unmount the sd card if that dont work do fresh installs off the market place . Also go into recovery and clear the cache and dalvik.
UnOfficial
juggalo1300 said:
Try and clear the cache for the market. If your using tb try to unmount the sd card if that dont work do fresh installs off the market place . Also go into recovery and clear the cache and dalvik.
UnOfficial
Click to expand...
Click to collapse
Done. I cleared both caches, and so far, all of the problems I've had with the market is gone. (Dropbox didn't install on the first try, but it did after the second.)
I've replaced the default touchwiz interface with Launcher Pro (TW was running wicked slow - loads of lag with just basic scrolling) and it seems to be running well. And it's definitely saving on battery life.)
That being said, it's not really my cup of tea. I restored my contacts and such, but eh. I think I'll try UnOfficial, and if it's not better, either go back to el29 or update to official ics.
I'll likely keep this one until tomorrow. You've been such a huge help. Thank you so much.
Actually, with launcher pro replacing it, this is pretty good. I want to mess with it more. I'll run it for a few days and see how it fairs.
Ok wait before everyone leaves, Ive got some questions too!
I just got my replacement(after a hard brick trying JB) and figure Id ask my questions in this thread rather than starting a new one..
1. Ive decided to odin EL29 EVERY TIME I want to flash a new rom, just to be safe. If I use CMW with EL29 and decide to try out CM9, Do I always need to flash a aokp kernel? Or is that built into the CM9 install?
2. If I like CM9, and want to make a nandroid backup of it, do I need to Odin back to EL29 first to back it up? Or is it safe to do it with the recovery that comes with CM9?
3. If the answer to #2 is yes, meaning I do have to odin back to EL29, how do I restore my backup? Let me explain:
Lets say I flash CM9, make a nandroid of CM9, then decide to try out say a different rom, like a TW rom. Then I hate the TW rom and wanna restore my backup of CM9. Do I need to ODIN back to EL29 to restore the nandroid? I read in the "how not to brick my..." thread its bad to restore a ICS rom from a GB Kernel. Can someone please explain?
Ive really, really tried to search and read as much as possible before asking, but a lot of the threads are old and have contradicting information. Sorry for being so noobish, but I dont wanna brick my new phone. I come from Evo, Evo3d, Hp Touchpad, etc, where there arent as many issues to flash customs roms. Ive rooted and flashed custom roms ever since the PPC6600, 100's of times and NEVER had a problem. Sorry, this just really confuses me for some reason!!!
Can't help you with CM9 or AOKP because I've never tried either one. The OP was talking about launcher pro. I highly recommend Nova launcher or Apex. They are both specifically built for ICS and look and act like stock android with great customization features.
Was going to make another topic, but I thought I'd ask here first
- The notification tray in this rom (Calk 3.0) is transparent, and I'm not fond of the icons in the Notification Tray. I tried using Rom Tool Box lite to change it, but the tray won't change, no matter what I do. Does anyone know how to fix this? I've tried before - it just won't change.
IceCatraz said:
Was going to make another topic, but I thought I'd ask here first
- The notification tray in this rom (Calk 3.0) is transparent, and I'm not fond of the icons in the Notification Tray. I tried using Rom Tool Box lite to change it, but the tray won't change, no matter what I do. Does anyone know how to fix this? I've tried before - it just won't change.
Click to expand...
Click to collapse
I don't mess with rom tool box. I hear good and bad things about it. If you start at page 1080 and read to the end people post new system ui's but it may theme it a little bit. They have blazers UI in there and one other one I think. I'm not sure it is transparent or not. Or even make a post in the thread about it. I know its still active and you may find your answer. Sorry I can't really help you on this.
Sent from my SPH-D710 using XDA
Alright, cool. Thanks a lot. You wouldn't happen to have the link to that thread, would you? I've searched, and I'm a bit lost. Sorry for the trouble.
Related
Ok, first of all, I've done a lot of reading so I'm not just postin w/o lookin but, with all the posts out there I may have missed something... so if there's a thread(s) that answers this that you know of a link would be awesome.....
So I've been rooted for a while and want to try out a new ROM... had a few questions
1) Before I flash a new ROM I do a Nandroid and wipe so... when I flash the new ROM are all my apps still there or do I have to go into Titanium Backup and restore each one from the SD? .. Basically, once I flash, how do I get all my apps that I use on a daily basis back up and runnin?
2) I know making a Nandroid backsup the whole system so, if I flash a new ROM, kernel and all and then restore to pre-flash then I will have the original radios, kernel and everything?...
3) Is there a ROM that is really stable, fairly fast (would rather speed over battery life) and has a lot of pre-built themes built?... I've made a couple of my own "partial" themes with custom icons and such but would like some pre-made stuff to play around with...
4) I've learned a whole sh!t-ton of stuff from you guys on here so thanks, us average folks (non-programmer) appreciate it..
blakjak220 said:
Ok, first of all, I've done a lot of reading so I'm not just postin w/o lookin but, with all the posts out there I may have missed something... so if there's a thread(s) that answers this that you know of a link would be awesome.....
So I've been rooted for a while and want to try out a new ROM... had a few questions
1) Before I flash a new ROM I do a Nandroid and wipe so... when I flash the new ROM are all my apps still there or do I have to go into Titanium Backup and restore each one from the SD? .. Basically, once I flash, how do I get all my apps that I use on a daily basis back up and runnin?
2) I know making a Nandroid backsup the whole system so, if I flash a new ROM, kernel and all and then restore to pre-flash then I will have the original radios, kernel and everything?...
3) Is there a ROM that is really stable, fairly fast (would rather speed over battery life) and has a lot of pre-built themes built?... I've made a couple of my own "partial" themes with custom icons and such but would like some pre-made stuff to play around with...
4) I've learned a whole sh!t-ton of stuff from you guys on here so thanks, us average folks (non-programmer) appreciate it..
Click to expand...
Click to collapse
1. You will restore all your apps with TB
2. If you restore a backup you will have everything back to before you flashed a new rom.
3. I like using Fresh but its a sense rom but very great , but yea just look around and pick a rom. Experiment and good luck
thanks man, I was already lookin at Fresh so I may give it a try tomorrow...
One more thing, I love the Swype keyboard and dont wanna lose it... so is that like an app that I just backup in TB and restore with whatever ROM I flash or a I stuck with the ROM's keyboard..?
blakjak220 said:
thanks man, I was already lookin at Fresh so I may give it a try tomorrow...
One more thing, I love the Swype keyboard and dont wanna lose it... so is that like an app that I just backup in TB and restore with whatever ROM I flash or a I stuck with the ROM's keyboard..?
Click to expand...
Click to collapse
I'm not sure but I think you can download SWYPE from market.
EDIT : I have tried a lot of ROM here, I'll recommend you MIUI... Good luck and welcome to the DARK-Side... =]
blakjak220 said:
thanks man, I was already lookin at Fresh so I may give it a try tomorrow...
One more thing, I love the Swype keyboard and dont wanna lose it... so is that like an app that I just backup in TB and restore with whatever ROM I flash or a I stuck with the ROM's keyboard..?
Click to expand...
Click to collapse
Its an apk file, so yes just back it up and your good , also fresh already has swype installed so your good to go.
jalexishg said:
I'm not sure but I think you can download SWYPE from market.
EDIT : I have tried a lot of ROM here, I'll recommend you MIUI... Good luck and welcome to the DARK-Side... =]
Click to expand...
Click to collapse
No swype is not on the market, nor can we post the apk on XDA
blakjak220 said:
Ok, first of all, I've done a lot of reading so I'm not just postin w/o lookin but, with all the posts out there I may have missed something... so if there's a thread(s) that answers this that you know of a link would be awesome.....
So I've been rooted for a while and want to try out a new ROM... had a few questions
1) Before I flash a new ROM I do a Nandroid and wipe so... when I flash the new ROM are all my apps still there or do I have to go into Titanium Backup and restore each one from the SD? .. Basically, once I flash, how do I get all my apps that I use on a daily basis back up and runnin?
2) I know making a Nandroid backsup the whole system so, if I flash a new ROM, kernel and all and then restore to pre-flash then I will have the original radios, kernel and everything?...
3) Is there a ROM that is really stable, fairly fast (would rather speed over battery life) and has a lot of pre-built themes built?... I've made a couple of my own "partial" themes with custom icons and such but would like some pre-made stuff to play around with...
4) I've learned a whole sh!t-ton of stuff from you guys on here so thanks, us average folks (non-programmer) appreciate it..
Click to expand...
Click to collapse
1) Yes use TB to restore your apps. I recommend the paid version because it restores fast and automatically. I don't have to manually confirm each one like my cheap ass girlfriend...but she doesn't flash much. The poor Epic devs don't have froyo source.
2) Yes except for the radios. I nandroid just in case but I prefer reflashing what ever rom I'm going back to because nandroid restores just didn't run as well. But I have a new phone now so maybe that is changed.
3) Try MIUI its so fast that I underclock to 499 and it still feels like its full speed. It also has a built in theme manager. Also cyanogenmod has a lot of themes (turrrrible sentence structure). If you don't like aosp try myn's rom.
pm if you need any help
Toxin715 said:
No swype is not on the market, nor can we post the apk on XDA
Click to expand...
Click to collapse
Oh ok, Thanks a lot for the info.
i think most of your questions are answered. i'll just give you the usual must try rom list:
myn's warm twopointtwo: this is the complete theme rom. it is simply fantastic. really, it looks like a new phone. performance is great, added apps are good, tweaks are good, everything is good really. it is definetally a must try. do not miss this.
caulkin's evio 2: another absolute must try. the tweaks are what make this rom special. caulkin knows his code. this is the fastest sense rom i have ever tried. simply speedy, fantastic battery, great tweaks by caulkin (almost all other devs use his tweaks) and a slick, silvery theme that makes sense look not ugly. in my opinion, this is myns only rival rom. crazy good.
ava-froyo z series: very good rom. ava knows his code. he has really dived deep into the evo's system, and made tweaks to just about everything, even how the radios interact. this is the rom if you want pure tweakage. works for some, for others it does not work. i'd reccomend trying it for 2 or 3 days to see if it is fantastic, or really slow and bad battery.
mikfroyo: i personally dont like this but many do. very small, fast rom.
then you have the aosp roms. these are not based off evo code. built from the ground up, using only google's base code for android.
cyanogenmod: humungous project. works on many different phones. vanilla style (google) android. many tweaks that should have been in android in the first place. this is the ultimate pure android. it should be what google uses for their stock. the things these people think up, makes iphones jealous. too much to name.
miui: many people like this. i dont, but its all preferance. iphone-like rom without all the, um, iphone. looks and feels as slick, fast, and battery efficiant as the iphone 4 itself, but its android! i have no idea who these dudes are, but they must be programmers because they baisically rewrote android to look, feel, and act like a crossover, with many tweaks in between. fully customizabe, not at all vanilla android. a must try. you may not like it but then again you may love it.
again, try caulkins, myns, miui, and any more that you may want.
any more reccomendations to add to this list?
Thanks for the info guys, really helped me out...
I know to do a nandroid backup but I've read all kinds of different stuff about what to backup and what app to use to back it up... apps? texts/calls? data? ... I just dont want to miss anything...
So far I've backed up all my apps in Titanium, my texts and calls with two apps for that, my contacts to google and just in case I backed up my whole SD card to my desktop... Anything that y'all can think of that I may have missed?.. Again, thanks
Yea thanks for the list.
S.I. 77
Thread moved to Q&A>
egzthunder1 said:
Thread moved to Q&A>
Click to expand...
Click to collapse
I was expecting that.
Either way, you really went above and beyond on backing up. I wouldn't worry about much more. To do a nandroid backup, boot into recovery. Scroll to backup/restore. Choose NAND backup. Make sure system, data, boot, cache, radio, and wimax are all checked. Then hit backup. Wait 5 minutes. Done. This is all assuming you have the newest Amon-ra recovery. If not, go to rom manager and choose flash alternate recovery at the bottom. Amon recovery is highly recommended over clockwormod. Sadly clockwork mod is the default for unrevoked.
So after you backup, make sure you wipe data, cache, and dalvik cache twice each before flashing a rom. Good luck
'Preciate all the help.. I now have Myn's Warm2.2 runnin and everything works great..
Also, just to note, if you like me FORGOT to back up all apps before flashing for the first time (ouch), you can get swype back very easily! They opened up the beta again, so you can just download from their website from your phone.
Sacshop said:
Also, just to note, if you like me FORGOT to back up all apps before flashing for the first time (ouch), you can get swype back very easily! They opened up the beta again, so you can just download from their website from your phone.
Click to expand...
Click to collapse
Isn't swype in the newest ota now? Well, the beta is better. If you want the beta instead of the ota version, use root explorer or adb commands to delete swype.apk from /system/app/ and libswypecore.so from /system/lib/. Then just install the beta like normal, and accept the do not update to newest ota warning it gives you.
dkdude36 said:
Isn't swype in the newest ota now? Well, the beta is better. If you want the beta instead of the ota version, use root explorer or adb commands to delete swype.apk from /system/app/ and libswypecore.so from /system/lib/. Then just install the beta like normal, and accept the do not update to newest ota warning it gives you.
Click to expand...
Click to collapse
How's the beta version better, what's it got that the version that's included in Warm2.2 doesnt have?
By the way, just my opinion but I tried MIUI and really didnt care for it.. too... iPhoneISH I guess, didnt feel as intuitive as Sense to me... but then again I've never had an iPhone.. anyway, just my 0.2cents
the beta version is better bcuz it is newer. newest is best, as they say. the ota is 2.7.something and the beta is on 2.17 already. the ota one is included in myns, and all sense roms. i'm not into miui either, but many people are. hey, its worth the flash to try it.
Oh ok, well I'll just stick with the OTA version for now I guess if there arent any glaring differences... and yeah, it was worth a try.. I can see how that would be someone's cup of tea.. just not mine.
Yes I would do the same if I had backed it up despite it being a stock version it never let me down. Regardless, you have a choice, for the time being
Sent from my PC36100 using XDA App
I just recently got rid of my Epic for the EVO and was wondering about some things with ROM manager. I never really used it that much because all ROM's on the Epic were basically all suppose to be done by going straight to CW. I understand everything in general but my question is basically can I have a ROM like MikFroyo 4.4 installed on the phone and use ROM manager to download and install something like MYN's Rom without having to "return to stock"? Or is it best to return to stock before adding a different ROM/Kernel? I backed up my original stock ROM but was just curious since I want to try a bunch of ROM's. I know I really like the MikFroyo ROM but I usually can only last about 1 or 2 weeks with the same ROM before I need to flash something, LOL. Which is why I got rid of the Epic because the DEV community was very slim compared to the EVO's. Thanks in advance.
I've used ROM manager but I prefer to make sure I have a 100% clean slate before flashing. I download the rom, put it on my sdcard. Then I use "format all" by Calkin, then flash the downloaded ROM thru clockwork/annonRA. This way I am 100% sure everything was wiped as clean as possible before going into a new rom. ROM's like MIUI seem to have issues if you don't do it this method....
*shrug* for what its worth.
Sounds good to me.
A good wipe always works well but many have also flashed tons via Rom Manager with no issues. I have used it many times also with no issues. I'd say use it and if for some reason you end up getting a few f/c issues then reflash manually after wiping directly from recovery.
If good devs like Myn are going to take the time to have it listed in RM then might as well take advantage.
CCallahan said:
A good wipe always works well but many have also flashed tons via Rom Manager with no issues. I have used it many times also with no issues. I'd say use it and if for some reason you end up getting a few f/c issues then reflash manually after wiping directly from recovery.
If good devs like Myn are going to take the time to have it listed in RM then might as well take advantage.
Click to expand...
Click to collapse
While I do agree, I know for 100% sure if you don't format_all on MIUI you'll end up with random reboots; yes some still do no matter what but 99% of people the format_all cure 'em. That's enough proof for me to always follow this method -- better to be 100% safe and eliminate as many potential problems as possible. OP - either way will work... do what works best for you.
CCallahan said:
A good wipe always works well but many have also flashed tons via Rom Manager with no issues. I have used it many times also with no issues. I'd say use it and if for some reason you end up getting a few f/c issues then reflash manually after wiping directly from recovery.
If good devs like Myn are going to take the time to have it listed in RM then might as well take advantage.
Click to expand...
Click to collapse
This is that "because it's there, it works" mentality. Yes, ROM Manager is safe, however it is not the best method for installing ROMs. I agree with the above statement of Calkulin's format all. I won't flash a new ROM now without it, and I have noticed a performance increase
hey xda fans....ok so i have a severe issue here:
i have the evo 4g...rooted... and am on sense with 2.2 and 3.70 (i think you guys know what that is) so anyway i want to get the new update and start really having fun with my phone. I have not been able to fully understand all this rooting and flashing etc...O_O so i installed ROM manager, which now some peeps are sayin dont use if you dont know what you are doing WELL HI, THAT WOULD BE ME so for all the experts, gods and godesses of rooting (EVO) flashing, please please please help me from start to absoulute finish...i need to know what am i downloading, running, saving and to where- that was a huge issue too i couldnt find the files after i downloaded them LOL if i am successful...I will post the greatest YOUTUBE, forum, blog about this..i am so lost right now
b4 i forget a couple updates of info everytime i tried to flash or do any type of recent updates i get the usb connection 170 error or maybe 171 cant remember now....ummm...i rooted originally with unrevoked so unrooting i wouldnt have a clue...and yes i have searched allll possible threads for help but i only get 50/50 and then still get messed up..thanks
thanks again and happy rooting
While I am not going to hold your hand as there is plenty of information on these forums and the internet, I will steer you in the right direction. Since you are rooted, all you really need to do is download the rooted version of the latest stock rom. There are a few in the development section. The version is 4.22. After downloading you will flash this rom in recovery. Make sure you do a nandroid backup before flashing the update.
DO NOT unroot just to install the update. You will lose the ability to root hour phone for the foreseeable future.
Good luck
Sent from my PC36100 using XDA Premium App
ok thanks i will try it now...stay tuned
Ur not going to see much difference. The update dissapointed lots of people expecting a new look. Install a couple of custom roms if u want to have some fun. I am using the MikG v1.03 Rom with new sense incorperated and its waaaay better than the stock update we just got.
Sent from my PC36100 using XDA App
Pleat try to see this as advice and not being an ass.
Rooting your phone is really for being able to dig in to your phone and get all you want out of it and be able to customize more than the average evo.
What were your initial intentions for rooting? I get the draw to have free wifi tether but, that just happens to be one perk of it. Of course, there are the options of kernels and cpu clocking.
But, really the developers are attempting to bring the newest and most useful and functional features to the roms opening the full potential of your phone.
Aside from that, if you are unclear and confused about the process of flashing, you should really hold off and do some more research.
Go to the wiki page and read up! i spent about a month reading everything I could find on rooting, flashing, kernels, radios, prls, threads on roms and their issues and up sides. I knew what I was doing and what rom and features I was going to use.
Honestly, youtube will also be your friend. A few devs also post videos people have made about their roms including how to flash them. You should also read up on the results of mistakes made during flashing and how to fix them.
Get to know your phone and submit it to do your will!
Good luck!
Sent by Supersonic!
thanks to all...and no offence at all imheroldman. i appreciate every piece of info...well i did flash the new 2.3 and totally hated it no difference...apps were gone (probably my fault LOL) but i went back so ill keep trying until i find the absolute best ROM for me. i may try your advise sand1303 and look at MIK
thanks again guys
dmccoy516 said:
thanks to all...and no offence at all imheroldman. i appreciate every piece of info...well i did flash the new 2.3 and totally hated it no difference...apps were gone (probably my fault LOL) but i went back so ill keep trying until i find the absolute best ROM for me. i may try your advise sand1303 and look at MIK
thanks again guys
Click to expand...
Click to collapse
Your apps were gone because you wiped data. Try Titanium Backup - there's a free version in the market that allows you to backup and restore, get the Pro key to avoid agreeing to the permissions/install of each individual app. The Pro version also allows for a larger number of backups per app, where the free version limits to one and when you make another backup it overwrites the first one. You can also freeze apps with the full version, but if you enable "Chuck Norris Mode" in settings the free version will allow you to uninstall system apps. There are other perks to the Pro Key, but I digress...
If you backup your apps & data, you can restore them on the new one. Whenever you flash a new rom, always wipe data, cache and dalvik (dalvik cache is under advanced in Clockwork). If you're simply updating the rom (ie to a newer version by the same dev, like Cyanogenmod nightlies) you can just wipe cache and dalvik unless otherwise stated in the rom. Whenever you flash anything other than a rom - kernels, themes, mods, radios, etc - do not wipe data.
If you don't know which rom to use, as long as you have a nandroid backup you can always go back to your setup that you like... so flash away. If you want to stick with something closer to what you're used to, try Myn's Warm TwoPointTwo... it's still FroYo. If you want Gingerbread/Sense, I've heard great things about MikG. I would avoid any rom that needs you to partition your SD card until you get your feet wet & know what you're doing.
Oh, and if you decide to flash the new radio update, don't pull the battery when you see the screen you've never seen before - you'll brick your phone. Just wait it out, and it'll take you back to recovery where you can then reboot normally.
(from... Evo/MIUI/Tapatalk)
Definitely look at Mik, and learn all you can about partitioning your card for APS2SD, you'll want that for the bigger ROMS, about flashing radios, very important to do that correctly, about theming, and so many other things that being rooted opens up for you.
Mik is great for sure, also kings roms. If you want something that is still htc sense there are many great developers and right now is the time because they are able to merge ports with the ota for the max performance for our phone while running gingerbread and having nifty new 3.0 sense features.
And maybe someday you will venture to the aosp world some day...
Sent by Supersonic!
I have an A100 that I flashed a very old version of Flex Reaper to right when ICS came out. So the complete setup looks like this.
CWM (very old version)
Android 4.0.3
Kernal 2.6.39.4+
Build Number
FLEX-100-REAPER-R3.1
Also has Crossix memory swap mod.
I set it up many months ago, and it has run great ever since.
Until, my son decided to pull out the SD card while it was running. @#%@[email protected]#^$#
Now, it won't let me update, or install anything. It says there is not enough storage room left even though it shows 18G of free space. I am guessing things got corrupted when the boy pulled the card out.
So, I have two questions.
1. Whats the safest way to dump this sucker and reload it from scratch?
a. Are there any gotcha's I need to look out for? (like removing crossix's mod before booting back into CWM)
2. I see there has been a lot of new recoveries, rom's, and kernal's put out for the A100 since I stop messing with mine. I'd gladly take some advice on setup's. I am much more interested in stability than extra features, or speed. If my son hadn't pulled that card, and corrupted my setup I would have never messed with it again because it just flat worked well as it was. I do however have an interest in Jelly Bean if there is a solid rom built at this time. I saw the CM10 threads, but there is so much back and forth, I can't get a good feeling it's solid yet.
Thanks ahead of time,
You can boot in cwm correct?
G2x-temasek CM7 build135.3 w/faux 054 kernel
justjackyl said:
You can boot in cwm correct?
G2x-temasek CM7 build135.3 w/faux 054 kernel
Click to expand...
Click to collapse
Yes,
Have you tried removing the crossix mount swap and reapply?
From what I am gathering, you are able to boot up normally, and have full functionality, and can run apps, but just cannot do anything new beyond that?
Such as installing, updates as you said. But can you open up apps that run before the "incident"?
Yes I can run everything already on the device. The only issues at this time are existing apps can't be updated, and new ones can't be installed.
I haven't tried to re-apply the mod swap. I figured the safest route long term would be a complete wipe, and start from a newly flashed rom. Might not be necessary, but I just figure safer long term. I am not afraid to re-flash it. It's still rooted, and unlocked. I just know it's better to be safe and ask questions first. I wouldn't be the first guy to brick an A100, it's not the friendliest device to work with.
The second question is based on the fact that if I am going to re-flash it, I may as well move to a more current rom if it is as stable as the rom I am coming from.
Sorry if I am a PITA, but thanks for helping out
BcWilk said:
Yes I can run everything already on the device. The only issues at this time are existing apps can't be updated, and new ones can't be installed.
I haven't tried to re-apply the mod swap. I figured the safest route long term would be a complete wipe, and start from a newly flashed rom. Might not be necessary, but I just figure safer long term. I am not afraid to re-flash it. It's still rooted, and unlocked. I just know it's better to be safe and ask questions first. I wouldn't be the first guy to brick an A100, it's not the friendliest device to work with.
The second question is based on the fact that if I am going to re-flash it, I may as well move to a more current rom if it is as stable as the rom I am coming from.
Sorry if I am a PITA, but thanks for helping out
Click to expand...
Click to collapse
Nah dude, your fine. Kinda why I hang around here.
In this case, I would not mess with trying to flash a new recovery.
As for CM9 or 10, I'm a strong advocate for 10. Others will argue. I had a lot of app compatibility issues with CM9.
That being said, your best bet for stability is CM10 09/02/12 build. It is the currently longest running build with few complaints. Pio has been kind enough to resume development for the A100 and has released an updated source build to 11/08/12, its what I am running and runs great.
Stock kernel is not bad, godmachines v2.0 kernel offers a few more tweaking options and is very good as well.
Download your flavors of ROM and kernel and put on your external SD. I'm sure you know what to do from there.
BTW, for cm/ICS. Flex-relix is most popular.
Iconia A100 CM10 PRIVATE BUILD, TabletUI, Updated to 11/03/12 Source; godmachine v2.0 kernel
I agree. Take your pick of the popular ROMs on the first dev page. Full wipe and reflash the one you pick, as per the ROMs instructions. I would backup any needed data off the microsd card and reformat it also, NTFS.
Thanks goes to both of you.
I was trying to get a grasp on if I need to upgrade to a new rom or not. It's a tough question to ask on what is basically a developers forum as this is a family tablet. Stability is much more of a concern than raw performance. I along with most others here always wants the latest on our devices, but when the tablet in question basically belong to the wife and kids, obviously stability take priority. I travel too much to deal with "issues". No digg to developlers. Bug's are just part of the process I understand. I test software for a living. I just want to leave that part of my life at work. We all appreciate what you do here.
Glad to hear that there is not much point in upgrading what already works from a recovery standpoint, but CM10 is sounding like a solid rom. I have it on my gnex, and it is just simpler to keep everything the same. I look forward to the update
Thanks everyone.
Ok, so I did a little reading to get caught back up on how to work with this device. I just wanna make sure I have the correct order, and files I need to get this done right the first time.
1. Delete the "install_recovery.sh" file that is there because of crossix swap mod.
2. Boot into CWM recovery, and wipe basically everything. (there is nothing on the tablet I need)
3. Flash the lastest CM10 found here http://droidinsider.com/download.php?folder=a100/ ? I think?
4. Flash kernal ( I can't find a link to download "godmachines v2.0 kernel" ) any help?
5. Flash gapps latest link I can find is here http://forum.xda-developers.com/showthread.php?p=29236322 is that right?
6. This thread seems to cover the rest well. http://forum.xda-developers.com/showthread.php?t=1931085
That seem about right?
BcWilk said:
Ok, so I did a little reading to get caught back up on how to work with this device. I just wanna make sure I have the correct order, and files I need to get this done right the first time.
1. Delete the "install_recovery.sh" file that is there because of crossix swap mod.
2. Boot into CWM recovery, and wipe basically everything. (there is nothing on the tablet I need)
3. Flash the lastest CM10 found here http://droidinsider.com/download.php?folder=a100/ ? I think?
4. Flash kernal ( I can't find a link to download "godmachines v2.0 kernel" ) any help?
5. Flash gapps latest link I can find is here http://forum.xda-developers.com/showthread.php?p=29236322 is that right?
6. This thread seems to cover the rest well. http://forum.xda-developers.com/showthread.php?t=1931085
That seem about right?
Click to expand...
Click to collapse
Here you go bud. It's always good to have a stockpile. Soooo...
CM10 4.1.2 Sources 11-8-12
CM10 4.1.1 Sources 9-2-12
Modded Stock ICS ROM (Acer Modded ROM)
FLEX-A100-REAPER-RELIX_Rev2
So choose your flavor of ROM, and than you can use the stock kernel, or the highest recommended by linuxsoxiety aka godmachine: godmachine v2.0 kernel
Gapps (Source Dependant)
4.1.1 Source Gapps
4.1.2 Source Gapps
Stinky ICS Gapps
You won't need to mess with crossix mount swap removal, will be removed upon wipe.
Boot into CWM. Now I use TWRP recovery (although I use CWM on my G2x), so the terms might differ slightly, but I think you'll understand:
Perform:
Factory/Data Reset (wipe)
Format/Wipe Cache
Format/Wipe Dalvik Cache
Format/Wipe System (in CWM, goto mounts and select format /system)
Just to be safe, I would:
Format/Wipe Internal Storage/SD
Than flash from external SD
ROM
Kernel (if not using stock)
Gapps (proper for source?)
Than make sure you follow the ten min, reboot, ten min rule. I'm sure you know what I mean from your studying.
Should be good.
Although, I recommend using GL to SD app in place or crossix mount swap. Takes a lil more effort to use, but, if there is an accidental SD pull, it won't affect the system.
Hope this helps.
Up and running.
Can't get that swap mod to run for some reason, I'll have to look into that when I am not drinking.
The launcher on CM10 is a little buggy, but other than that it seems to run well. Thanks for all the help
many thanks
BcWilk said:
Up and running.
Can't get that swap mod to run for some reason, I'll have to look into that when I am not drinking.
The launcher on CM10 is a little buggy, but other than that it seems to run well. Thanks for all the help
many thanks
Click to expand...
Click to collapse
Use apex launcher (its talked about in my tips thread)
And gl to sd in place of swap mount
I think the mount points are different than ice and swap wont work on jb
G2x-temasek CM7 build135.4 w/faux 054 kernel
justjackyl said:
Use apex launcher (its talked about in my tips thread)
And gl to sd in place of swap mount
I think the mount points are different than ice and swap wont work on jb
G2x-temasek CM7 build135.4 w/faux 054 kernel
Click to expand...
Click to collapse
They are but symlinked for backward compatibility. I also put up a jb version awhile back.
That said it does pose potential issues if its yanked hot as you saw.
Tapatalked from my Nexus 7 - Kuroikaze AOSP
Coming from an EVO 4G I thought I had a pretty good grip on installing roms. A week after getting and rooting my S3 I'm still gun shy. I want to install Jelly Bomb but I keep seeing posts about flash counters and dirty flash. I've never heard this mentioned before. Are these Samsung exclusive terms? I wanted to go easy and find a Rom as close to Stock as possible with the ability to remove apps to get my feet wet but haven't found one. This phone seems easier to brick than the EVO. Am I right? Also, I see things referencing Touchwiz and fishing it. Very confused. Samsung's version of Sense I guess?
ruckstande said:
Coming from an EVO 4G I thought I had a pretty good grip on installing roms. A week after getting and rooting my S3 I'm still gun shy. I want to install Jelly Bomb but I keep seeing posts about flash counters and dirty flash. I've never heard this mentioned before. Are these Samsung exclusive terms? I wanted to go easy and find a Rom as close to Stock as possible with the ability to remove apps to get my feet wet but haven't found one. This phone seems easier to brick than the EVO. Am I right? Also, I see things referencing Touchwiz and fishing it. Very confused. Samsung's version of Sense I guess?
Click to expand...
Click to collapse
Flash counters can be reset pretty easy these days. all roms labeled as having TW or touchwiz are pretty much stock with things like battery saving mods or battery hogging apps removed that are usually not needed"debloated".
this post sent from my Jellybombed GalaxySIII
joeyhdownsouth said:
Flash counters can be reset pretty easy these days. all roms labeled as having TW or touchwiz are pretty much stock with things like battery saving mods or battery hogging apps removed that are usually not needed"debloated".
this post sent from my Jellybombed GalaxySIII
Click to expand...
Click to collapse
Thanks. I see you are on Jelly Bomb right now. What's your overall opinion of it? Any problems? Anything I should know not mentioned in the Dev's post?
ruckstande said:
Thanks. I see you are on Jelly Bomb right now. What's your overall opinion of it? Any problems? Anything I should know not mentioned in the Dev's post?
Click to expand...
Click to collapse
Here's what you do...former evo'er here as well...
Grab the one click Odin LJ7 that you will find in sg3/android dev. Titled (root)odin one clicks by billard. Read the post so you understand how to use it. Save it to your CPU. That will save you if you ever brick your shiny new phone.
Go on you tube and search qbking77....you'll find every video you want regarding rooting and installing cmw
After that its the exact same way to flash ROMs as your evo. I promise.
Good luck
jwitt418 said:
Here's what you do...former evo'er here as well...
Grab the one click Odin LJ7 that you will find in sg3/android dev. Titled (root)odin one clicks by billard. Read the post so you understand how to use it. Save it to your CPU. That will save you if you ever brick your shiny new phone.
Go on you tube and search qbking77....you'll find every video you want regarding rooting and installing cmw
After that its the exact same way to flash ROMs as your evo. I promise.
Good luck
Click to expand...
Click to collapse
So I should be flashing through Odin the same way I rooted? I, did root btw using qbking77 very easy video guide. Took me all of ten minutes to root.
ruckstande said:
Thanks. I see you are on Jelly Bomb right now. What's your overall opinion of it? Any problems? Anything I should know not mentioned in the Dev's post?
Click to expand...
Click to collapse
I luv this rom, super themed though, not everyone likes all the blue. For me everything works. Just the statusbar after a reboot, you have to pull down notification bar once to get it to show up. Other than that no problems, kernal in 10.2 allows overclocking also.
this post sent from my Jellybombed GalaxySIII
Your fine then...just install cmw and your good to go.
The galaxy 3 is different than the evo in the sense that its very easy to root and unroot using Odin. The evo is a pain to unroot.
Make sure your grab that one click Odin and save tho because it will bail you out of trouble if something gets screwed up. You could run that and it will return you to stock or stock rooted (your choice depending on what file you download).
Anyways. Install cmw. Download ROM to your SD or internal SD. Hold volume up, home, power to cmw. Wipe/factory reset x3, wipe cache, advanced/wipe dalvik, install ROM, reboot
By the way. If you want what you posted in op keep stock but rooted. If you want a better kernel flash team sonics or jelly bomb with kt747....but if I were you I'd go SlimBean...enjoy
One other thing. What's this business about downloading a modem?
The roms are not modem dependant. And chances are if you're on stock you already have the latest modem. If you want to confirm go in the about section of settings and look at your baseband. should end in LJ7. Like I said though its not really important
If the modem isn't that important, why can't I connect to Sprint's network at all? I was working on installing the Goodness ROM which said I had to install a particular modem. I downloaded all files to the computer as suggested, transferred them to the phone then used TWRP as my backup and installed the ROM and the modem as stated. When I went to reboot it told me that there was no ROM installed. So I went back to my recovery installed it and now I can not connect to the network at all. Can someone please help? I need my phone as I am a Paramedic and I talk to the hospitals with it when I am bringing them a pt.
PolynesianMedic said:
If the modem isn't that important, why can't I connect to Sprint's network at all? I was working on installing the Goodness ROM which said I had to install a particular modem. I downloaded all files to the computer as suggested, transferred them to the phone then used TWRP as my backup and installed the ROM and the modem as stated. When I went to reboot it told me that there was no ROM installed. So I went back to my recovery installed it and now I can not connect to the network at all. Can someone please help? I need my phone as I am a Paramedic and I talk to the hospitals with it when I am bringing them a pt.
Click to expand...
Click to collapse
Not trying to sound harsh here but if that's the case just stay stock rooted. You need the phone brother...peoples lives are depending on it...lol
On a lighter side, I do t have experience with that ROM. But sounds like a bad flash. Wipe/factory reset...cache....dalvik...and I even format the internal SD...haven't had any problems
Open the dialer and hit ##72786# Should set ya straight
Oh well that didn't work. I watched the QBKing77 video and followed those instructions. Install took way less than I expected. Maybe two minutes? I pressed reboot and it rebooted back into recovery. That didn't go so well.